diff options
Diffstat (limited to 'drivers/net/ixgbe')
-rw-r--r-- | drivers/net/ixgbe/ixgbe.h | 6 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 75 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 31 |
3 files changed, 83 insertions, 29 deletions
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index dd688d45e9c..385be601666 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -267,7 +267,8 @@ struct ixgbe_adapter { enum ixgbe_fc_mode last_lfc_mode; /* Interrupt Throttle Rate */ - u32 itr_setting; + u32 rx_itr_setting; + u32 tx_itr_setting; u16 eitr_low; u16 eitr_high; @@ -351,7 +352,8 @@ struct ixgbe_adapter { struct ixgbe_hw_stats stats; /* Interrupt Throttle Rate */ - u32 eitr_param; + u32 rx_eitr_param; + u32 tx_eitr_param; unsigned long state; u64 tx_busy; diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 026e94a9984..53b0a668025 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1929,7 +1929,7 @@ static int ixgbe_get_coalesce(struct net_device *netdev, ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0].work_limit; /* only valid if in constant ITR mode */ - switch (adapter->itr_setting) { + switch (adapter->rx_itr_setting) { case 0: /* throttling disabled */ ec->rx_coalesce_usecs = 0; @@ -1940,9 +1940,25 @@ static int ixgbe_get_coalesce(struct net_device *netdev, break; default: /* fixed interrupt rate mode */ - ec->rx_coalesce_usecs = 1000000/adapter->eitr_param; + ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param; break; } + + /* only valid if in constant ITR mode */ + switch (adapter->tx_itr_setting) { + case 0: + /* throttling disabled */ + ec->tx_coalesce_usecs = 0; + break; + case 1: + /* dynamic ITR mode */ + ec->tx_coalesce_usecs = 1; + break; + default: + ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param; + break; + } + return 0; } @@ -1953,6 +1969,14 @@ static int ixgbe_set_coalesce(struct net_device *netdev, struct ixgbe_q_vector *q_vector; int i; + /* + * don't accept tx specific changes if we've got mixed RxTx vectors + * test and jump out here if needed before changing the rx numbers + */ + if ((1000000/ec->tx_coalesce_usecs) != adapter->tx_eitr_param && + adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count) + return -EINVAL; + if (ec->tx_max_coalesced_frames_irq) adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq; @@ -1963,26 +1987,49 @@ static int ixgbe_set_coalesce(struct net_device *netdev, return -EINVAL; /* store the value in ints/second */ - adapter->eitr_param = 1000000/ec->rx_coalesce_usecs; + adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs; /* static value of interrupt rate */ - adapter->itr_setting = adapter->eitr_param; + adapter->rx_itr_setting = adapter->rx_eitr_param; /* clear the lower bit as its used for dynamic state */ - adapter->itr_setting &= ~1; + adapter->rx_itr_setting &= ~1; } else if (ec->rx_coalesce_usecs == 1) { /* 1 means dynamic mode */ - adapter->eitr_param = 20000; - adapter->itr_setting = 1; + adapter->rx_eitr_param = 20000; + adapter->rx_itr_setting = 1; } else { /* * any other value means disable eitr, which is best * served by setting the interrupt rate very high */ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) - adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE; + adapter->rx_eitr_param = IXGBE_MAX_RSC_INT_RATE; else - adapter->eitr_param = IXGBE_MAX_INT_RATE; - adapter->itr_setting = 0; + adapter->rx_eitr_param = IXGBE_MAX_INT_RATE; + adapter->rx_itr_setting = 0; + } + + if (ec->tx_coalesce_usecs > 1) { + /* check the limits */ + if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) || + (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE)) + return -EINVAL; + + /* store the value in ints/second */ + adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs; + + /* static value of interrupt rate */ + adapter->tx_itr_setting = adapter->tx_eitr_param; + + /* clear the lower bit as its used for dynamic state */ + adapter->tx_itr_setting &= ~1; + } else if (ec->tx_coalesce_usecs == 1) { + /* 1 means dynamic mode */ + adapter->tx_eitr_param = 10000; + adapter->tx_itr_setting = 1; + } else { + adapter->tx_eitr_param = IXGBE_MAX_INT_RATE; + adapter->tx_itr_setting = 0; } /* MSI/MSIx Interrupt Mode */ @@ -1992,17 +2039,17 @@ static int ixgbe_set_coalesce(struct net_device *netdev, for (i = 0; i < num_vectors; i++) { q_vector = adapter->q_vector[i]; if (q_vector->txr_count && !q_vector->rxr_count) - /* tx vector gets half the rate */ - q_vector->eitr = (adapter->eitr_param >> 1); + /* tx only */ + q_vector->eitr = adapter->tx_eitr_param; else /* rx only or mixed */ - q_vector->eitr = adapter->eitr_param; + q_vector->eitr = adapter->rx_eitr_param; ixgbe_write_eitr(q_vector); } /* Legacy Interrupt Mode */ } else { q_vector = adapter->q_vector[0]; - q_vector->eitr = adapter->eitr_param; + q_vector->eitr = adapter->rx_eitr_param; ixgbe_write_eitr(q_vector); } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 056434c9831..1aa9f6a5adf 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -926,12 +926,12 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) r_idx + 1); } - /* if this is a tx only vector halve the interrupt rate */ if (q_vector->txr_count && !q_vector->rxr_count) - q_vector->eitr = (adapter->eitr_param >> 1); + /* tx only */ + q_vector->eitr = adapter->tx_eitr_param; else if (q_vector->rxr_count) - /* rx only */ - q_vector->eitr = adapter->eitr_param; + /* rx or mixed */ + q_vector->eitr = adapter->rx_eitr_param; ixgbe_write_eitr(q_vector); } @@ -1359,7 +1359,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) /* If all Rx work done, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 1) + if (adapter->rx_itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, @@ -1420,7 +1420,7 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget) /* If all Rx work done, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 1) + if (adapter->rx_itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, @@ -1458,10 +1458,10 @@ static int ixgbe_clean_txonly(struct napi_struct *napi, int budget) if (!ixgbe_clean_tx_irq(q_vector, tx_ring)) work_done = budget; - /* If all Rx work done, exit the polling mode */ + /* If all Tx work done, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 1) + if (adapter->tx_itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx)); @@ -1848,7 +1848,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; IXGBE_WRITE_REG(hw, IXGBE_EITR(0), - EITR_INTS_PER_SEC_TO_REG(adapter->eitr_param)); + EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param)); ixgbe_set_ivar(adapter, 0, 0, 0); ixgbe_set_ivar(adapter, 1, 0, 0); @@ -2991,7 +2991,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget) /* If budget not fully consumed, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 1) + if (adapter->rx_itr_setting & 1) ixgbe_set_itr(adapter); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE); @@ -3601,7 +3601,10 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter) if (!q_vector) goto err_out; q_vector->adapter = adapter; - q_vector->eitr = adapter->eitr_param; + if (q_vector->txr_count && !q_vector->rxr_count) + q_vector->eitr = adapter->tx_eitr_param; + else + q_vector->eitr = adapter->rx_eitr_param; q_vector->v_idx = q_idx; netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64); adapter->q_vector[q_idx] = q_vector; @@ -3870,8 +3873,10 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) hw->fc.disable_fc_autoneg = false; /* enable itr by default in dynamic mode */ - adapter->itr_setting = 1; - adapter->eitr_param = 20000; + adapter->rx_itr_setting = 1; + adapter->rx_eitr_param = 20000; + adapter->tx_itr_setting = 1; + adapter->tx_eitr_param = 10000; /* set defaults for eitr in MegaBytes */ adapter->eitr_low = 10; |