diff options
Diffstat (limited to 'drivers/net/ixgbe')
| -rw-r--r-- | drivers/net/ixgbe/Makefile | 7 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe.h | 66 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 336 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 1292 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 483 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.h | 15 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_dcb.c | 19 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_dcb.h | 56 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_dcb_82598.c | 3 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_dcb_82598.h | 2 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_dcb_82599.c | 467 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_dcb_82599.h | 127 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_dcb_nl.c | 205 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 130 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 1399 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 592 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.h | 18 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 825 |
18 files changed, 5092 insertions, 950 deletions
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile index 6e7ef765bcd..b3f8208ec7b 100644 --- a/drivers/net/ixgbe/Makefile +++ b/drivers/net/ixgbe/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel 10 Gigabit PCI Express Linux driver -# Copyright(c) 1999 - 2007 Intel Corporation. +# Copyright(c) 1999 - 2009 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, @@ -33,6 +33,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ - ixgbe_82598.o ixgbe_phy.o + ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o -ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o ixgbe_dcb_nl.o +ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ + ixgbe_dcb_82599.o ixgbe_dcb_nl.o diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index e112008f39c..c26433d1460 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -31,7 +31,6 @@ #include <linux/types.h> #include <linux/pci.h> #include <linux/netdevice.h> -#include <linux/inet_lro.h> #include <linux/aer.h> #include "ixgbe_type.h" @@ -72,6 +71,7 @@ #define IXGBE_RXBUFFER_128 128 /* Used for packet split */ #define IXGBE_RXBUFFER_256 256 /* Used for packet split */ #define IXGBE_RXBUFFER_2048 2048 +#define IXGBE_MAX_RXBUFFER 16384 /* largest size for a single descriptor */ #define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256 @@ -88,9 +88,6 @@ #define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000 #define IXGBE_TX_FLAGS_VLAN_SHIFT 16 -#define IXGBE_MAX_LRO_DESCRIPTORS 8 -#define IXGBE_MAX_LRO_AGGREGATE 32 - /* wrapper around a pointer to a socket buffer, * so a DMA handle can be stored along with the buffer */ struct ixgbe_tx_buffer { @@ -142,21 +139,25 @@ struct ixgbe_ring { /* cpu for tx queue */ int cpu; #endif - struct net_lro_mgr lro_mgr; - bool lro_used; struct ixgbe_queue_stats stats; - u16 v_idx; /* maps directly to the index for this ring in the hardware - * vector array, can also be used for finding the bit in EICR - * and friends that represents the vector for this ring */ + u64 v_idx; /* maps directly to the index for this ring in the hardware + * vector array, can also be used for finding the bit in EICR + * and friends that represents the vector for this ring */ u16 work_limit; /* max work per interrupt */ u16 rx_buf_len; }; -#define RING_F_DCB 0 -#define RING_F_VMDQ 1 -#define RING_F_RSS 2 +enum ixgbe_ring_f_enum { + RING_F_NONE = 0, + RING_F_DCB, + RING_F_VMDQ, + RING_F_RSS, + + RING_F_ARRAY_SIZE /* must be last in enum set */ +}; + #define IXGBE_MAX_DCB_INDICES 8 #define IXGBE_MAX_RSS_INDICES 16 #define IXGBE_MAX_VMDQ_INDICES 16 @@ -165,8 +166,8 @@ struct ixgbe_ring_feature { int mask; }; -#define MAX_RX_QUEUES 64 -#define MAX_TX_QUEUES 32 +#define MAX_RX_QUEUES 128 +#define MAX_TX_QUEUES 128 #define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \ ? 8 : 1) @@ -188,10 +189,11 @@ struct ixgbe_q_vector { }; /* Helper macros to switch between ints/sec and what the register uses. - * And yes, it's the same math going both ways. + * And yes, it's the same math going both ways. The lowest value + * supported by all of the ixgbe hardware is 8. */ #define EITR_INTS_PER_SEC_TO_REG(_eitr) \ - ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 0) + ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8) #define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG #define IXGBE_DESC_UNUSED(R) \ @@ -210,9 +212,15 @@ struct ixgbe_q_vector { #define OTHER_VECTOR 1 #define NON_Q_VECTORS (OTHER_VECTOR) -#define MAX_MSIX_Q_VECTORS 16 +#define MAX_MSIX_VECTORS_82599 64 +#define MAX_MSIX_Q_VECTORS_82599 64 +#define MAX_MSIX_VECTORS_82598 18 +#define MAX_MSIX_Q_VECTORS_82598 16 + +#define MAX_MSIX_Q_VECTORS MAX_MSIX_Q_VECTORS_82599 +#define MAX_MSIX_COUNT MAX_MSIX_VECTORS_82599 + #define MIN_MSIX_Q_VECTORS 2 -#define MAX_MSIX_COUNT (MAX_MSIX_Q_VECTORS + NON_Q_VECTORS) #define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS) /* board specific private data structure */ @@ -222,7 +230,7 @@ struct ixgbe_adapter { u16 bd_number; struct work_struct reset_task; struct ixgbe_q_vector q_vector[MAX_MSIX_Q_VECTORS]; - char name[MAX_MSIX_COUNT][IFNAMSIZ + 5]; + char name[MAX_MSIX_COUNT][IFNAMSIZ + 9]; struct ixgbe_dcb_config dcb_cfg; struct ixgbe_dcb_config temp_dcb_cfg; u8 dcb_set_bitmap; @@ -247,10 +255,12 @@ struct ixgbe_adapter { struct ixgbe_ring *rx_ring; /* One per active queue */ int num_rx_queues; u64 hw_csum_rx_error; + u64 hw_rx_no_dma_resources; u64 hw_csum_rx_good; u64 non_eop_descs; int num_msix_vectors; - struct ixgbe_ring_feature ring_feature[3]; + int max_msix_q_vectors; /* true count of q_vectors for device */ + struct ixgbe_ring_feature ring_feature[RING_F_ARRAY_SIZE]; struct msix_entry *msix_entries; u64 rx_hdr_split; @@ -274,6 +284,7 @@ struct ixgbe_adapter { #define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 11) #define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 12) #define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 13) +#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 14) #define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 16) #define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 17) #define IXGBE_FLAG_VMDQ_CAPABLE (u32)(1 << 18) @@ -281,7 +292,8 @@ struct ixgbe_adapter { #define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 20) #define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 22) #define IXGBE_FLAG_IN_WATCHDOG_TASK (u32)(1 << 23) -#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 24) +#define IXGBE_FLAG_IN_SFP_LINK_TASK (u32)(1 << 24) +#define IXGBE_FLAG_IN_SFP_MOD_TASK (u32)(1 << 25) /* default to trying for four seconds */ #define IXGBE_TRY_LINK_TIMEOUT (4 * HZ) @@ -301,9 +313,6 @@ struct ixgbe_adapter { unsigned long state; u64 tx_busy; - u64 lro_aggregated; - u64 lro_flushed; - u64 lro_no_desc; unsigned int tx_ring_count; unsigned int rx_ring_count; @@ -314,6 +323,10 @@ struct ixgbe_adapter { struct work_struct watchdog_task; struct work_struct sfp_task; struct timer_list sfp_timer; + struct work_struct multispeed_fiber_task; + struct work_struct sfp_config_module_task; + u32 wol; + u16 eeprom_version; }; enum ixbge_state_t { @@ -325,9 +338,11 @@ enum ixbge_state_t { enum ixgbe_boards { board_82598, + board_82599, }; extern struct ixgbe_info ixgbe_82598_info; +extern struct ixgbe_info ixgbe_82599_info; #ifdef CONFIG_IXGBE_DCB extern struct dcbnl_rtnl_ops dcbnl_ops; extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, @@ -352,5 +367,6 @@ extern void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter); extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter); void ixgbe_napi_add_all(struct ixgbe_adapter *adapter); void ixgbe_napi_del_all(struct ixgbe_adapter *adapter); +extern void ixgbe_write_eitr(struct ixgbe_adapter *, int, u32); #endif /* _IXGBE_H_ */ diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index ad5699d9ab0..ed265a7a898 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -50,6 +50,27 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); /** + * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u16 msix_count; + pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82598_CAPS, + &msix_count); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW, so increment to give proper value */ + msix_count++; + + return msix_count; +} + +/** */ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) { @@ -58,6 +79,9 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) s32 ret_val = 0; u16 list_offset, data_offset; + /* Set the bus information prior to PHY identification */ + mac->ops.get_bus_info(hw); + /* Call PHY identify routine to get the phy type */ ixgbe_identify_phy_generic(hw); @@ -106,6 +130,7 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES; mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw); out: return ret_val; @@ -124,18 +149,12 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, bool *autoneg) { s32 status = 0; - s32 autoc_reg; - - autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - if (hw->mac.link_settings_loaded) { - autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE; - autoc_reg &= ~IXGBE_AUTOC_LMS_MASK; - autoc_reg |= hw->mac.link_attach_type; - autoc_reg |= hw->mac.link_mode_select; - } - - switch (autoc_reg & IXGBE_AUTOC_LMS_MASK) { + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. + */ + switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) { case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; *autoneg = false; @@ -154,9 +173,9 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, case IXGBE_AUTOC_LMS_KX4_AN: case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: *speed = IXGBE_LINK_SPEED_UNKNOWN; - if (autoc_reg & IXGBE_AUTOC_KX4_SUPP) + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc_reg & IXGBE_AUTOC_KX_SUPP) + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; *autoneg = true; break; @@ -213,6 +232,10 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) /* Media type for I82598 is based on device ID */ switch (hw->device_id) { + case IXGBE_DEV_ID_82598: + case IXGBE_DEV_ID_82598_BX: + media_type = ixgbe_media_type_backplane; + break; case IXGBE_DEV_ID_82598AF_DUAL_PORT: case IXGBE_DEV_ID_82598AF_SINGLE_PORT: case IXGBE_DEV_ID_82598EB_CX4: @@ -235,104 +258,75 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) } /** - * ixgbe_setup_fc_82598 - Configure flow control settings + * ixgbe_fc_enable_82598 - Enable flow control * @hw: pointer to hardware structure * @packetbuf_num: packet buffer number (0-7) * - * Configures the flow control settings based on SW configuration. This - * function is used for 802.3x flow control configuration only. + * Enable flow control according to the current settings. **/ -static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num) +static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) { - u32 frctl_reg; + s32 ret_val = 0; + u32 fctrl_reg; u32 rmcs_reg; + u32 reg; - if (packetbuf_num < 0 || packetbuf_num > 7) { - hw_dbg(hw, "Invalid packet buffer number [%d], expected range is" - " 0-7\n", packetbuf_num); - } - - frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); - frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); + fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); /* - * 10 gig parts do not have a word in the EEPROM to determine the - * default flow control setting, so we explicitly set it to full. - */ - if (hw->fc.type == ixgbe_fc_default) - hw->fc.type = ixgbe_fc_full; - - /* - * We want to save off the original Flow Control configuration just in - * case we get disconnected and then reconnected into a different hub - * or switch with different Flow Control capabilities. - */ - hw->fc.original_type = hw->fc.type; - - /* - * The possible values of the "flow_control" parameter are: + * The possible values of fc.current_mode are: * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames but not - * send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but we do not - * support receiving pause frames) + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). * 3: Both Rx and Tx flow control (symmetric) are enabled. * other: Invalid. */ - switch (hw->fc.type) { + switch (hw->fc.current_mode) { case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ break; case ixgbe_fc_rx_pause: /* - * Rx Flow control is enabled, - * and Tx Flow control is disabled. + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. */ - frctl_reg |= IXGBE_FCTRL_RFCE; + fctrl_reg |= IXGBE_FCTRL_RFCE; break; case ixgbe_fc_tx_pause: /* - * Tx Flow control is enabled, and Rx Flow control is disabled, - * by a software over-ride. + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. */ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; break; case ixgbe_fc_full: - /* - * Flow control (both Rx and Tx) is enabled by a software - * over-ride. - */ - frctl_reg |= IXGBE_FCTRL_RFCE; + /* Flow control (both Rx and Tx) is enabled by SW override. */ + fctrl_reg |= IXGBE_FCTRL_RFCE; rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; break; default: - /* We should never get here. The value should be 0-3. */ hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = -IXGBE_ERR_CONFIG; + goto out; break; } /* Enable 802.3x based flow control settings. */ - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg); + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); - /* - * Check for invalid software configuration, zeros are completely - * invalid for all parameters used past this point, and if we enable - * flow control with zero water marks, we blast flow control packets. - */ - if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) { - hw_dbg(hw, "Flow control structure initialized incorrectly\n"); - return IXGBE_ERR_INVALID_LINK_SETTINGS; - } - - /* - * We need to set up the Receive Threshold high and low water - * marks as well as (optionally) enabling the transmission of - * XON frames. - */ - if (hw->fc.type & ixgbe_fc_tx_pause) { + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + if (hw->fc.current_mode & ixgbe_fc_tx_pause) { if (hw->fc.send_xon) { IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), (hw->fc.low_water | IXGBE_FCRTL_XONE)); @@ -340,14 +334,93 @@ static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num) IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), hw->fc.low_water); } + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), - (hw->fc.high_water)|IXGBE_FCRTH_FCEN); + (hw->fc.high_water | IXGBE_FCRTH_FCEN)); } - IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time); + /* Configure pause time (2 TCs per register) */ + reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num)); + if ((packetbuf_num & 1) == 0) + reg = (reg & 0xFFFF0000) | hw->fc.pause_time; + else + reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16); + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg); + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1)); - return 0; +out: + return ret_val; +} + +/** + * ixgbe_setup_fc_82598 - Configure flow control settings + * @hw: pointer to hardware structure + * @packetbuf_num: packet buffer number (0-7) + * + * Configures the flow control settings based on SW configuration. This + * function is used for 802.3x flow control configuration only. + **/ +static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num) +{ + s32 ret_val = 0; + ixgbe_link_speed speed; + bool link_up; + + /* Validate the packetbuf configuration */ + if (packetbuf_num < 0 || packetbuf_num > 7) { + hw_dbg(hw, "Invalid packet buffer number [%d], expected range is" + " 0-7\n", packetbuf_num); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * Validate the water mark configuration. Zero water marks are invalid + * because it causes the controller to just blast out fc packets. + */ + if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) { + hw_dbg(hw, "Invalid water mark configuration\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * Validate the requested mode. Strict IEEE mode does not allow + * ixgbe_fc_rx_pause because it will cause testing anomalies. + */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * 10gig parts do not have a word in the EEPROM to determine the + * default flow control setting, so we explicitly set it to full. + */ + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* + * Save off the requested flow control mode for use later. Depending + * on the link partner's capabilities, we may or may not use this mode. + */ + + hw->fc.current_mode = hw->fc.requested_mode; + + /* Decide whether to use autoneg or not. */ + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) + ret_val = ixgbe_fc_autoneg(hw); + + if (ret_val) + goto out; + + ret_val = ixgbe_fc_enable_82598(hw, packetbuf_num); + +out: + return ret_val; } /** @@ -364,27 +437,17 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw) u32 i; s32 status = 0; - autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - - if (hw->mac.link_settings_loaded) { - autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE; - autoc_reg &= ~IXGBE_AUTOC_LMS_MASK; - autoc_reg |= hw->mac.link_attach_type; - autoc_reg |= hw->mac.link_mode_select; - - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - IXGBE_WRITE_FLUSH(hw); - msleep(50); - } - /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); autoc_reg |= IXGBE_AUTOC_AN_RESTART; IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); /* Only poll for autoneg to complete if specified to do so */ if (hw->phy.autoneg_wait_to_complete) { - if (hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN || - hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { links_reg = 0; /* Just in case Autoneg time = 0 */ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); @@ -404,7 +467,6 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw) * case we get disconnected and then reconnected into a different hub * or switch with different Flow Control capabilities. */ - hw->fc.original_type = hw->fc.type; ixgbe_setup_fc_82598(hw, 0); /* Add delay to filter out noises during initial link setup */ @@ -508,37 +570,43 @@ out: * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) { - s32 status = 0; + s32 status = 0; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc = curr_autoc; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; - /* If speed is 10G, then check for CX4 or XAUI. */ - if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && - (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4))) { - hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN; - } else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg)) { - hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN; - } else if (autoneg) { - /* BX mode - Autonegotiate 1G */ - if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD)) - hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN; - else /* KX/KX4 mode */ - hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN_1G_AN; - } else { + /* Check to see if speed passed in is supported. */ + ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg); + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) status = IXGBE_ERR_LINK_SETUP; + + /* Set KX4/KX support according to speed requested */ + else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + if (autoc != curr_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); } if (status == 0) { hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete; - hw->mac.link_settings_loaded = true; /* * Setup and restart the link based on the new values in * ixgbe_hw This will write the AUTOC register based on the new * stored values */ - ixgbe_setup_mac_link_82598(hw); + status = ixgbe_setup_mac_link_82598(hw); } return status; @@ -561,10 +629,6 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw) /* Restart autonegotiation on PHY */ status = hw->phy.ops.setup_link(hw); - /* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */ - hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX); - hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN; - /* Set up MAC */ ixgbe_setup_mac_link_82598(hw); @@ -591,10 +655,6 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, autoneg_wait_to_complete); - /* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */ - hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX); - hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN; - /* Set up MAC */ ixgbe_setup_mac_link_82598(hw); @@ -694,24 +754,16 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); /* - * AUTOC register which stores link settings gets cleared - * and reloaded from EEPROM after reset. We need to restore - * our stored value from init in case SW changed the attach - * type or speed. If this is the first time and link settings - * have not been stored, store default settings from AUTOC. + * Store the original AUTOC value if it has not been + * stored off yet. Otherwise restore the stored original + * AUTOC value since the reset operation sets back to deaults. */ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - if (hw->mac.link_settings_loaded) { - autoc &= ~(IXGBE_AUTOC_LMS_ATTACH_TYPE); - autoc &= ~(IXGBE_AUTOC_LMS_MASK); - autoc |= hw->mac.link_attach_type; - autoc |= hw->mac.link_mode_select; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); - } else { - hw->mac.link_attach_type = - (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE); - hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK); - hw->mac.link_settings_loaded = true; + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_link_settings_stored = true; + } else if (autoc != hw->mac.orig_autoc) { + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); } /* Store the permanent mac address */ @@ -997,11 +1049,18 @@ out: * * Determines physical layer capabilities of the current configuration. **/ -static s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) +static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) { - s32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; switch (hw->device_id) { + case IXGBE_DEV_ID_82598: + /* Default device ID is mezzanine card KX/KX4 */ + physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | + IXGBE_PHYSICAL_LAYER_1000BASE_KX); + break; + case IXGBE_DEV_ID_82598_BX: + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; case IXGBE_DEV_ID_82598EB_CX4: case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; @@ -1055,8 +1114,11 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, .get_media_type = &ixgbe_get_media_type_82598, .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598, + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, .get_mac_addr = &ixgbe_get_mac_addr_generic, .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, .read_analog_reg8 = &ixgbe_read_analog_reg8_82598, .write_analog_reg8 = &ixgbe_write_analog_reg8_82598, .setup_link = &ixgbe_setup_mac_link_82598, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c new file mode 100644 index 00000000000..beae7e01260 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -0,0 +1,1292 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" + +#define IXGBE_82599_MAX_TX_QUEUES 128 +#define IXGBE_82599_MAX_RX_QUEUES 128 +#define IXGBE_82599_RAR_ENTRIES 128 +#define IXGBE_82599_MC_TBL_SIZE 128 +#define IXGBE_82599_VFT_TBL_SIZE 128 + +s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw); +s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete); +s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw); +static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw); +s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, + u32 vind, bool vlan_on); +s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw); +s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw); +s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); +s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_start_hw_rev_0_82599(struct ixgbe_hw *hw); +s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw); +u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw); + +void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = + &ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.setup_link_speed = + &ixgbe_setup_mac_link_speed_multispeed_fiber; + } else { + mac->ops.setup_link = + &ixgbe_setup_mac_link_82599; + mac->ops.setup_link_speed = + &ixgbe_setup_mac_link_speed_82599; + } +} + +s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u16 list_offset, data_offset, data_value; + + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { + ixgbe_init_mac_link_ops_82599(hw); + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + + if (ret_val != 0) + goto setup_sfp_out; + + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + while (data_value != 0xffff) { + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); + IXGBE_WRITE_FLUSH(hw); + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + } + /* Now restart DSP */ + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102); + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d); + IXGBE_WRITE_FLUSH(hw); + } + +setup_sfp_out: + return ret_val; +} + +/** + * ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u16 msix_count; + pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS, + &msix_count); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW, so increment to give proper value */ + msix_count++; + + return msix_count; +} + +static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val; + + /* Set the bus information prior to PHY identification */ + mac->ops.get_bus_info(hw); + + /* Call PHY identify routine to get the Cu or SFI phy type */ + ret_val = phy->ops.identify(hw); + + if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto get_invariants_out; + + ixgbe_init_mac_link_ops_82599(hw); + + /* Setup SFP module if there is one present. */ + ret_val = mac->ops.setup_sfp(hw); + + /* If copper media, overwrite with copper function pointers */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82599; + mac->ops.setup_link_speed = + &ixgbe_setup_copper_link_speed_82599; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_82599; + } + + /* PHY Init */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + default: + break; + } + + mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; + mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw); + +get_invariants_out: + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @negotiation: true when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *negotiation) +{ + s32 status = 0; + + switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_10G_SERIAL: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: + *speed = IXGBE_LINK_SPEED_100_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_SGMII_1G_100M: + *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; + *negotiation = false; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + goto out; + break; + } + + if (hw->phy.multispeed_fiber) { + *speed |= IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + } + +out: + return status; +} + +/** + * ixgbe_get_copper_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + **/ +static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = IXGBE_ERR_LINK_SETUP; + u16 speed_ability; + + *speed = 0; + *autoneg = true; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &speed_ability); + + if (status == 0) { + if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + } + + return status; +} + +/** + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + if (hw->phy.type == ixgbe_phy_cu_unknown || + hw->phy.type == ixgbe_phy_tn) { + media_type = ixgbe_media_type_copper; + goto out; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599: + case IXGBE_DEV_ID_82599_KX4: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82599_SFP: + media_type = ixgbe_media_type_fiber; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_setup_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (hw->phy.autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not complete.\n"); + } + } + } + + /* Set up flow control */ + status = ixgbe_setup_fc_generic(hw, 0); + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Setup MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link for multi-speed fiber at 1G speed, if link + * fails at 10G. + * Performs autonegotiation if needed. + **/ +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_82599_AUTONEG; + status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, link_speed, + true, true); + return status; +} + +/** + * ixgbe_setup_mac_link_speed_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed phy_link_speed; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + u32 speedcnt = 0; + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + bool link_up = false; + bool negotiation; + + /* Mask off requested but non-supported speeds */ + hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation); + speed &= phy_link_speed; + + /* + * Try each speed one by one, highest priority first. We do this in + * software because 10gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* Set hardware SDP's */ + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + + ixgbe_setup_mac_link_speed_82599(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg, + autoneg_wait_to_complete); + + msleep(50); + + /* If we have link, just jump out */ + hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false); + if (link_up) + goto out; + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* Set hardware SDP's */ + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + + ixgbe_setup_mac_link_speed_82599( + hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg, + autoneg_wait_to_complete); + + msleep(50); + + /* If we have link, just jump out */ + hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false); + if (link_up) + goto out; + } + + /* + * We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, + highest_link_speed, + autoneg, + autoneg_wait_to_complete); + +out: + return status; +} + +/** + * ixgbe_check_mac_link_82599 - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete) +{ + u32 links_reg; + u32 i; + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_10G_82599) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_1G_82599) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + else + *speed = IXGBE_LINK_SPEED_100_FULL; + + + return 0; +} + +/** + * ixgbe_setup_mac_link_speed_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 links_reg; + u32 i; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + + /* Check to see if speed passed in is supported. */ + hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg); + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) { + status = IXGBE_ERR_LINK_SETUP; + } else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + /* Set KX4/KX/KR support according to speed requested */ + autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) + autoc |= IXGBE_AUTOC_KR_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + /* Switch from 1G SFI to 10G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; + } + } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + /* Switch from 10G SFI to 1G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + if (autoneg) + autoc |= IXGBE_AUTOC_LMS_1G_AN; + else + autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + } + } + + if (status == 0) { + /* Restart link */ + autoc |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /*Just in case Autoneg time=0*/ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = + IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not " + "complete.\n"); + } + } + } + + /* Set up flow control */ + status = ixgbe_setup_fc_generic(hw, 0); + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + } + + return status; +} + +/** + * ixgbe_setup_copper_link_82599 - Setup copper link settings + * @hw: pointer to hardware structure + * + * Restarts the link on PHY and then MAC. Performs autonegotiation if needed. + **/ +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw) +{ + s32 status; + + /* Restart autonegotiation on PHY */ + status = hw->phy.ops.setup_link(hw); + + /* Set up MAC */ + ixgbe_setup_mac_link_82599(hw); + + return status; +} + +/** + * ixgbe_setup_copper_link_speed_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Restarts link on PHY and MAC based on settings passed in. + **/ +static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_setup_mac_link_82599(hw); + + return status; +} + +/** + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 ctrl, ctrl_ext; + u32 i; + u32 autoc; + u32 autoc2; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + hw->mac.ops.stop_adapter(hw); + + /* Reset PHY */ + hw->phy.ops.reset(hw); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests before reset + */ + if (ixgbe_disable_pcie_master(hw) != 0) { + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + } + + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + /* Clear PF Reset Done bit so PF/VF Mail Ops can work */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + + msleep(50); + + + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = true; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + return status; +} + +/** + * ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar + **/ +s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar_lo, mpsar_hi; + u32 rar_entries = hw->mac.num_rar_entries; + + if (rar < rar_entries) { + mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + + if (!mpsar_lo && !mpsar_hi) + goto done; + + if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { + if (mpsar_lo) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); + mpsar_lo = 0; + } + if (mpsar_hi) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); + mpsar_hi = 0; + } + } else if (vmdq < 32) { + mpsar_lo &= ~(1 << vmdq); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); + } else { + mpsar_hi &= ~(1 << (vmdq - 32)); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); + } + + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + hw->mac.ops.clear_rar(hw, rar); + } else { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + } + +done: + return 0; +} + +/** + * ixgbe_set_vmdq_82599 - Associate a VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq pool index + **/ +s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar; + u32 rar_entries = hw->mac.num_rar_entries; + + if (rar < rar_entries) { + if (vmdq < 32) { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar |= 1 << vmdq; + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); + } else { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + mpsar |= 1 << (vmdq - 32); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); + } + } else { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + } + return 0; +} + +/** + * ixgbe_set_vfta_82599 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFVFB + * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + u32 regindex; + u32 bitindex; + u32 bits; + u32 first_empty_slot; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* + * this is a 2 part operation - first the VFTA, then the + * VLVF and VLVFB if vind is set + */ + + /* Part 1 + * The VFTA is a bitstring made up of 128 32-bit registers + * that enable the particular VLAN id, much like the MTA: + * bits[11-5]: which register + * bits[4-0]: which bit in the register + */ + regindex = (vlan >> 5) & 0x7F; + bitindex = vlan & 0x1F; + bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + if (vlan_on) + bits |= (1 << bitindex); + else + bits &= ~(1 << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); + + + /* Part 2 + * If the vind is set + * Either vlan_on + * make sure the vlan is in VLVF + * set the vind bit in the matching VLVFB + * Or !vlan_on + * clear the pool bit and possibly the vind + */ + if (vind) { + /* find the vlanid or the first empty slot */ + first_empty_slot = 0; + + for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); + if (!bits && !first_empty_slot) + first_empty_slot = regindex; + else if ((bits & 0x0FFF) == vlan) + break; + } + + if (regindex >= IXGBE_VLVF_ENTRIES) { + if (first_empty_slot) + regindex = first_empty_slot; + else { + hw_dbg(hw, "No space in VLVF.\n"); + goto out; + } + } + + if (vlan_on) { + /* set the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(regindex * 2)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(regindex * 2), bits); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1), bits); + } + } else { + /* clear the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(regindex * 2)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(regindex * 2), bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1)); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1), bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB(regindex * 2)); + } + } + + if (bits) + IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), + (IXGBE_VLVF_VIEN | vlan)); + else + IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), 0); + } + +out: + return 0; +} + +/** + * ixgbe_clear_vfta_82599 - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0); + } + + return 0; +} + +/** + * ixgbe_blink_led_start_82599 - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + **/ +s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_82599 - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + **/ +s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg &= ~IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array + * @hw: pointer to hardware structure + **/ +s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw) +{ + int i; + hw_dbg(hw, " Clearing UTA\n"); + + for (i = 0; i < 128; i++) + IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); + + return 0; +} + +/** + * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Omer analog register specified. + **/ +s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 core_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | + (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); + *val = (u8)core_ctl; + + return 0; +} + +/** + * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Omer analog register specified. + **/ +s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 core_ctl; + + core_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + + return 0; +} + +/** + * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function. + * Then performs device-specific: + * Clears the rate limiter registers. + **/ +s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) +{ + u32 q_num; + + ixgbe_start_hw_generic(hw); + + /* Clear the rate limiters */ + for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) { + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, q_num); + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); + } + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_identify_phy_82599 - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + **/ +s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + status = ixgbe_identify_phy_generic(hw); + if (status != 0) + status = ixgbe_identify_sfp_module_generic(hw); + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u8 comp_codes_10g = 0; + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599: + case IXGBE_DEV_ID_82599_KX4: + /* Default device ID is mezzanine card KX/KX4 */ + physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | + IXGBE_PHYSICAL_LAYER_1000BASE_KX); + break; + case IXGBE_DEV_ID_82599_SFP: + hw->phy.ops.identify_sfp(hw); + + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_da_cu: + case ixgbe_sfp_type_da_cu_core0: + case ixgbe_sfp_type_da_cu_core1: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_sfp_type_sr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case ixgbe_sfp_type_lr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + case ixgbe_sfp_type_srlr_core0: + case ixgbe_sfp_type_srlr_core1: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, + &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = + IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = + IXGBE_PHYSICAL_LAYER_10GBASE_LR; + else + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + default: + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + } + break; + default: + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + } + + return physical_layer; +} + +/** + * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit for 82599 + **/ +s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) +{ +#define IXGBE_MAX_SECRX_POLL 30 + int i; + int secrxreg; + + /* + * Workaround for 82599 silicon errata when enabling the Rx datapath. + * If traffic is incoming before we enable the Rx unit, it could hang + * the Rx DMA unit. Therefore, make sure the security engine is + * completely disabled prior to enabling the Rx unit. + */ + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg |= IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); + if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) + break; + else + udelay(10); + } + + /* For informational purposes only */ + if (i >= IXGBE_MAX_SECRX_POLL) + hw_dbg(hw, "Rx unit being enabled before security " + "path fully disabled. Continuing with init.\n"); + + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +static struct ixgbe_mac_operations mac_ops_82599 = { + .init_hw = &ixgbe_init_hw_generic, + .reset_hw = &ixgbe_reset_hw_82599, + .start_hw = &ixgbe_start_hw_82599, + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, + .get_media_type = &ixgbe_get_media_type_82599, + .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, + .enable_rx_dma = &ixgbe_enable_rx_dma_82599, + .get_mac_addr = &ixgbe_get_mac_addr_generic, + .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, + .read_analog_reg8 = &ixgbe_read_analog_reg8_82599, + .write_analog_reg8 = &ixgbe_write_analog_reg8_82599, + .setup_link = &ixgbe_setup_mac_link_82599, + .setup_link_speed = &ixgbe_setup_mac_link_speed_82599, + .check_link = &ixgbe_check_mac_link_82599, + .get_link_capabilities = &ixgbe_get_link_capabilities_82599, + .led_on = &ixgbe_led_on_generic, + .led_off = &ixgbe_led_off_generic, + .blink_led_start = &ixgbe_blink_led_start_82599, + .blink_led_stop = &ixgbe_blink_led_stop_82599, + .set_rar = &ixgbe_set_rar_generic, + .clear_rar = &ixgbe_clear_rar_generic, + .set_vmdq = &ixgbe_set_vmdq_82599, + .clear_vmdq = &ixgbe_clear_vmdq_82599, + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, + .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, + .enable_mc = &ixgbe_enable_mc_generic, + .disable_mc = &ixgbe_disable_mc_generic, + .clear_vfta = &ixgbe_clear_vfta_82599, + .set_vfta = &ixgbe_set_vfta_82599, + .setup_fc = &ixgbe_setup_fc_generic, + .init_uta_tables = &ixgbe_init_uta_tables_82599, + .setup_sfp = &ixgbe_setup_sfp_modules_82599, +}; + +static struct ixgbe_eeprom_operations eeprom_ops_82599 = { + .init_params = &ixgbe_init_eeprom_params_generic, + .read = &ixgbe_read_eeprom_generic, + .write = &ixgbe_write_eeprom_generic, + .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, + .update_checksum = &ixgbe_update_eeprom_checksum_generic, +}; + +static struct ixgbe_phy_operations phy_ops_82599 = { + .identify = &ixgbe_identify_phy_82599, + .identify_sfp = &ixgbe_identify_sfp_module_generic, + .reset = &ixgbe_reset_phy_generic, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_byte = &ixgbe_read_i2c_byte_generic, + .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, + .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, +}; + +struct ixgbe_info ixgbe_82599_info = { + .mac = ixgbe_mac_82599EB, + .get_invariants = &ixgbe_get_invariants_82599, + .mac_ops = &mac_ops_82599, + .eeprom_ops = &eeprom_ops_82599, + .phy_ops = &phy_ops_82599, +}; diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index f67c68404bb..8cfd3fd309a 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -29,6 +29,7 @@ #include <linux/delay.h> #include <linux/sched.h> +#include "ixgbe.h" #include "ixgbe_common.h" #include "ixgbe_phy.h" @@ -80,9 +81,6 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) /* Clear the VLAN filter table */ hw->mac.ops.clear_vfta(hw); - /* Set up link */ - hw->mac.ops.setup_link(hw); - /* Clear statistics registers */ hw->mac.ops.clear_hw_cntrs(hw); @@ -254,6 +252,81 @@ s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) } /** + * ixgbe_get_bus_info_generic - Generic set PCI bus info + * @hw: pointer to hardware structure + * + * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure + **/ +s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + struct ixgbe_mac_info *mac = &hw->mac; + u16 link_status; + + hw->bus.type = ixgbe_bus_type_pci_express; + + /* Get the negotiated link width and speed from PCI config space */ + pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS, + &link_status); + + switch (link_status & IXGBE_PCI_LINK_WIDTH) { + case IXGBE_PCI_LINK_WIDTH_1: + hw->bus.width = ixgbe_bus_width_pcie_x1; + break; + case IXGBE_PCI_LINK_WIDTH_2: + hw->bus.width = ixgbe_bus_width_pcie_x2; + break; + case IXGBE_PCI_LINK_WIDTH_4: + hw->bus.width = ixgbe_bus_width_pcie_x4; + break; + case IXGBE_PCI_LINK_WIDTH_8: + hw->bus.width = ixgbe_bus_width_pcie_x8; + break; + default: + hw->bus.width = ixgbe_bus_width_unknown; + break; + } + + switch (link_status & IXGBE_PCI_LINK_SPEED) { + case IXGBE_PCI_LINK_SPEED_2500: + hw->bus.speed = ixgbe_bus_speed_2500; + break; + case IXGBE_PCI_LINK_SPEED_5000: + hw->bus.speed = ixgbe_bus_speed_5000; + break; + default: + hw->bus.speed = ixgbe_bus_speed_unknown; + break; + } + + mac->ops.set_lan_id(hw); + + return 0; +} + +/** + * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices + * @hw: pointer to the HW structure + * + * Determines the LAN function id by reading memory-mapped registers + * and swaps the port value if requested. + **/ +void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) +{ + struct ixgbe_bus_info *bus = &hw->bus; + u32 reg; + + reg = IXGBE_READ_REG(hw, IXGBE_STATUS); + bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; + bus->lan_id = bus->func; + + /* check for a port swap */ + reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); + if (reg & IXGBE_FACTPS_LFS) + bus->func ^= 0x1; +} + +/** * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units * @hw: pointer to hardware structure * @@ -393,6 +466,73 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) } /** + * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status; + u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; + + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + /* Prepare the EEPROM for writing */ + status = ixgbe_acquire_eeprom(hw); + + if (status == 0) { + if (ixgbe_ready_eeprom(hw) != 0) { + ixgbe_release_eeprom(hw); + status = IXGBE_ERR_EEPROM; + } + } + + if (status == 0) { + ixgbe_standby_eeprom(hw); + + /* Send the WRITE ENABLE command (8 bit opcode ) */ + ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI, + IXGBE_EEPROM_OPCODE_BITS); + + ixgbe_standby_eeprom(hw); + + /* + * Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ + if ((hw->eeprom.address_bits == 8) && (offset >= 128)) + write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, write_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2), + hw->eeprom.address_bits); + + /* Send the data */ + data = (data >> 8) | (data << 8); + ixgbe_shift_out_eeprom_bits(hw, data, 16); + ixgbe_standby_eeprom(hw); + + msleep(hw->eeprom.semaphore_delay); + /* Done with writing - release the EEPROM */ + ixgbe_release_eeprom(hw); + } + +out: + return status; +} + +/** * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang * @hw: pointer to hardware structure * @offset: offset within the EEPROM to be read @@ -521,7 +661,7 @@ static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw) static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) { s32 status = 0; - u32 eec; + u32 eec = 0; u32 i; if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) @@ -1490,6 +1630,326 @@ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) } /** + * ixgbe_fc_enable - Enable flow control + * @hw: pointer to hardware structure + * @packetbuf_num: packet buffer number (0-7) + * + * Enable flow control according to the current settings. + **/ +s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num) +{ + s32 ret_val = 0; + u32 mflcn_reg; + u32 fccfg_reg; + u32 reg; + + mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); + mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE); + + fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG); + fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY); + + /* + * The possible values of fc.current_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * 4: Priority Flow Control is enabled. + * other: Invalid. + */ + switch (hw->fc.current_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + mflcn_reg |= IXGBE_MFLCN_RFCE; + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + mflcn_reg |= IXGBE_MFLCN_RFCE; + fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; + break; +#ifdef CONFIG_DCB + case ixgbe_fc_pfc: + goto out; + break; +#endif + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = -IXGBE_ERR_CONFIG; + goto out; + break; + } + + /* Enable 802.3x based flow control settings. */ + IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg); + IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg); + + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + if (hw->fc.current_mode & ixgbe_fc_tx_pause) { + if (hw->fc.send_xon) + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), + (hw->fc.low_water | IXGBE_FCRTL_XONE)); + else + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), + hw->fc.low_water); + + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), + (hw->fc.high_water | IXGBE_FCRTH_FCEN)); + } + + /* Configure pause time (2 TCs per register) */ + reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num)); + if ((packetbuf_num & 1) == 0) + reg = (reg & 0xFFFF0000) | hw->fc.pause_time; + else + reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16); + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg); + + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1)); + +out: + return ret_val; +} + +/** + * ixgbe_fc_autoneg - Configure flow control + * @hw: pointer to hardware structure + * + * Negotiates flow control capabilities with link partner using autoneg and + * applies the results. + **/ +s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u32 i, reg, pcs_anadv_reg, pcs_lpab_reg; + + reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + + /* + * The possible values of fc.current_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * 4: Priority Flow Control is enabled. + * other: Invalid. + */ + switch (hw->fc.current_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + reg |= (IXGBE_PCS1GANA_ASM_PAUSE); + reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE); + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); + break; +#ifdef CONFIG_DCB + case ixgbe_fc_pfc: + goto out; + break; +#endif + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = -IXGBE_ERR_CONFIG; + goto out; + break; + } + + IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); + reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); + + /* Set PCS register for autoneg */ + /* Enable and restart autoneg */ + reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART; + + /* Disable AN timeout */ + if (hw->fc.strict_ieee) + reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; + + hw_dbg(hw, "Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg); + IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); + + /* See if autonegotiation has succeeded */ + hw->mac.autoneg_succeeded = 0; + for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { + msleep(10); + reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); + if ((reg & (IXGBE_PCS1GLSTA_LINK_OK | + IXGBE_PCS1GLSTA_AN_COMPLETE)) == + (IXGBE_PCS1GLSTA_LINK_OK | + IXGBE_PCS1GLSTA_AN_COMPLETE)) { + if (!(reg & IXGBE_PCS1GLSTA_AN_TIMED_OUT)) + hw->mac.autoneg_succeeded = 1; + break; + } + } + + if (!hw->mac.autoneg_succeeded) { + /* Autoneg failed to achieve a link, so we turn fc off */ + hw->fc.current_mode = ixgbe_fc_none; + hw_dbg(hw, "Flow Control = NONE.\n"); + goto out; + } + + /* + * Read the AN advertisement and LP ability registers and resolve + * local flow control settings accordingly + */ + pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); + if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) { + /* + * Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == ixgbe_fc_full) { + hw->fc.current_mode = ixgbe_fc_full; + hw_dbg(hw, "Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); + } + } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { + hw->fc.current_mode = ixgbe_fc_tx_pause; + hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); + } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && + !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_none; + hw_dbg(hw, "Flow Control = NONE.\n"); + } + +out: + return ret_val; +} + +/** + * ixgbe_setup_fc_generic - Set up flow control + * @hw: pointer to hardware structure + * + * Sets up flow control. + **/ +s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num) +{ + s32 ret_val = 0; + ixgbe_link_speed speed; + bool link_up; + +#ifdef CONFIG_DCB + if (hw->fc.requested_mode == ixgbe_fc_pfc) { + hw->fc.current_mode = hw->fc.requested_mode; + goto out; + } + +#endif + /* Validate the packetbuf configuration */ + if (packetbuf_num < 0 || packetbuf_num > 7) { + hw_dbg(hw, "Invalid packet buffer number [%d], expected range " + "is 0-7\n", packetbuf_num); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * Validate the water mark configuration. Zero water marks are invalid + * because it causes the controller to just blast out fc packets. + */ + if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) { + hw_dbg(hw, "Invalid water mark configuration\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * Validate the requested mode. Strict IEEE mode does not allow + * ixgbe_fc_rx_pause because it will cause testing anomalies. + */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict " + "IEEE mode\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * 10gig parts do not have a word in the EEPROM to determine the + * default flow control setting, so we explicitly set it to full. + */ + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* + * Save off the requested flow control mode for use later. Depending + * on the link partner's capabilities, we may or may not use this mode. + */ + hw->fc.current_mode = hw->fc.requested_mode; + + /* Decide whether to use autoneg or not. */ + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) + ret_val = ixgbe_fc_autoneg(hw); + + if (ret_val) + goto out; + + ret_val = ixgbe_fc_enable(hw, packetbuf_num); + +out: + return ret_val; +} + +/** * ixgbe_disable_pcie_master - Disable PCI-express master access * @hw: pointer to hardware structure * @@ -1597,3 +2057,16 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) ixgbe_release_eeprom_semaphore(hw); } +/** + * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit + **/ +s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) +{ + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + + return 0; +} diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 192f8d01291..7e94d6d399a 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -37,12 +37,14 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw); s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num); s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr); s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw); +void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw); s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw); s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index); s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index); s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw); +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data); s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); @@ -61,6 +63,10 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, u32 addr_count, ixgbe_mc_addr_itr func); s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw); s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw); +s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval); +s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num); +s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packtetbuf_num); +s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw); s32 ixgbe_validate_mac_addr(u8 *mac_addr); s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask); @@ -72,6 +78,13 @@ s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val); #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg))) +#ifndef writeq +#define writeq(val, addr) writel((u32) (val), addr); \ + writel((u32) (val >> 32), (addr + 4)); +#endif + +#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg))) + #define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg)) #define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\ diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c index e2e28ac63de..a1562287342 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.c +++ b/drivers/net/ixgbe/ixgbe_dcb.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -31,6 +31,7 @@ #include "ixgbe_type.h" #include "ixgbe_dcb.h" #include "ixgbe_dcb_82598.h" +#include "ixgbe_dcb_82599.h" /** * ixgbe_dcb_config - Struct containing DCB settings. @@ -215,6 +216,8 @@ s32 ixgbe_dcb_get_tc_stats(struct ixgbe_hw *hw, struct ixgbe_hw_stats *stats, s32 ret = 0; if (hw->mac.type == ixgbe_mac_82598EB) ret = ixgbe_dcb_get_tc_stats_82598(hw, stats, tc_count); + else if (hw->mac.type == ixgbe_mac_82599EB) + ret = ixgbe_dcb_get_tc_stats_82599(hw, stats, tc_count); return ret; } @@ -232,6 +235,8 @@ s32 ixgbe_dcb_get_pfc_stats(struct ixgbe_hw *hw, struct ixgbe_hw_stats *stats, s32 ret = 0; if (hw->mac.type == ixgbe_mac_82598EB) ret = ixgbe_dcb_get_pfc_stats_82598(hw, stats, tc_count); + else if (hw->mac.type == ixgbe_mac_82599EB) + ret = ixgbe_dcb_get_pfc_stats_82599(hw, stats, tc_count); return ret; } @@ -248,6 +253,8 @@ s32 ixgbe_dcb_config_rx_arbiter(struct ixgbe_hw *hw, s32 ret = 0; if (hw->mac.type == ixgbe_mac_82598EB) ret = ixgbe_dcb_config_rx_arbiter_82598(hw, dcb_config); + else if (hw->mac.type == ixgbe_mac_82599EB) + ret = ixgbe_dcb_config_rx_arbiter_82599(hw, dcb_config); return ret; } @@ -264,6 +271,8 @@ s32 ixgbe_dcb_config_tx_desc_arbiter(struct ixgbe_hw *hw, s32 ret = 0; if (hw->mac.type == ixgbe_mac_82598EB) ret = ixgbe_dcb_config_tx_desc_arbiter_82598(hw, dcb_config); + else if (hw->mac.type == ixgbe_mac_82599EB) + ret = ixgbe_dcb_config_tx_desc_arbiter_82599(hw, dcb_config); return ret; } @@ -280,6 +289,8 @@ s32 ixgbe_dcb_config_tx_data_arbiter(struct ixgbe_hw *hw, s32 ret = 0; if (hw->mac.type == ixgbe_mac_82598EB) ret = ixgbe_dcb_config_tx_data_arbiter_82598(hw, dcb_config); + else if (hw->mac.type == ixgbe_mac_82599EB) + ret = ixgbe_dcb_config_tx_data_arbiter_82599(hw, dcb_config); return ret; } @@ -296,6 +307,8 @@ s32 ixgbe_dcb_config_pfc(struct ixgbe_hw *hw, s32 ret = 0; if (hw->mac.type == ixgbe_mac_82598EB) ret = ixgbe_dcb_config_pfc_82598(hw, dcb_config); + else if (hw->mac.type == ixgbe_mac_82599EB) + ret = ixgbe_dcb_config_pfc_82599(hw, dcb_config); return ret; } @@ -311,6 +324,8 @@ s32 ixgbe_dcb_config_tc_stats(struct ixgbe_hw *hw) s32 ret = 0; if (hw->mac.type == ixgbe_mac_82598EB) ret = ixgbe_dcb_config_tc_stats_82598(hw); + else if (hw->mac.type == ixgbe_mac_82599EB) + ret = ixgbe_dcb_config_tc_stats_82599(hw); return ret; } @@ -327,6 +342,8 @@ s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw, s32 ret = 0; if (hw->mac.type == ixgbe_mac_82598EB) ret = ixgbe_dcb_hw_config_82598(hw, dcb_config); + else if (hw->mac.type == ixgbe_mac_82599EB) + ret = ixgbe_dcb_hw_config_82599(hw, dcb_config); return ret; } diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ixgbe/ixgbe_dcb.h index 75f6efe1e36..64a9fa15c05 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.h +++ b/drivers/net/ixgbe/ixgbe_dcb.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -75,6 +75,26 @@ enum strict_prio_type { prio_link }; +/* DCB capability definitions */ +#define IXGBE_DCB_PG_SUPPORT 0x00000001 +#define IXGBE_DCB_PFC_SUPPORT 0x00000002 +#define IXGBE_DCB_BCN_SUPPORT 0x00000004 +#define IXGBE_DCB_UP2TC_SUPPORT 0x00000008 +#define IXGBE_DCB_GSP_SUPPORT 0x00000010 + +#define IXGBE_DCB_8_TC_SUPPORT 0x80 + +struct dcb_support { + /* DCB capabilities */ + u32 capabilities; + + /* Each bit represents a number of TCs configurable in the hw. + * If 8 traffic classes can be configured, the value is 0x80. + */ + u8 traffic_classes; + u8 pfc_traffic_classes; +}; + /* Traffic class bandwidth allocation per direction */ struct tc_bw_alloc { u8 bwg_id; /* Bandwidth Group (BWG) ID */ @@ -108,38 +128,18 @@ enum dcb_rx_pba_cfg { pba_80_48 /* PBA[0-3] each use 80KB, PBA[4-7] each use 48KB */ }; -/* - * This structure contains many values encoded as fixed-point - * numbers, meaning that some of bits are dedicated to the - * magnitude and others to the fraction part. In the comments - * this is shown as f=n, where n is the number of fraction bits. - * These fraction bits are always the low-order bits. The size - * of the magnitude is not specified. - */ -struct bcn_config { - u32 rp_admin_mode[MAX_TRAFFIC_CLASS]; /* BCN enabled, per TC */ - u32 bcna_option[2]; /* BCNA Port + MAC Addr */ - u32 rp_w; /* Derivative Weight, f=3 */ - u32 rp_gi; /* Increase Gain, f=12 */ - u32 rp_gd; /* Decrease Gain, f=12 */ - u32 rp_ru; /* Rate Unit */ - u32 rp_alpha; /* Max Decrease Factor, f=12 */ - u32 rp_beta; /* Max Increase Factor, f=12 */ - u32 rp_ri; /* Initial Rate */ - u32 rp_td; /* Drift Interval Timer */ - u32 rp_rd; /* Drift Increase */ - u32 rp_tmax; /* Severe Congestion Backoff Timer Range */ - u32 rp_rmin; /* Severe Congestion Restart Rate */ - u32 rp_wrtt; /* RTT Moving Average Weight */ +struct dcb_num_tcs { + u8 pg_tcs; + u8 pfc_tcs; }; struct ixgbe_dcb_config { - struct bcn_config bcn; - + struct dcb_support support; + struct dcb_num_tcs num_tcs; struct tc_configuration tc_config[MAX_TRAFFIC_CLASS]; u8 bw_percentage[2][MAX_BW_GROUP]; /* One each for Tx/Rx */ - - bool round_robin_enable; + bool pfc_mode_enable; + bool round_robin_enable; enum dcb_rx_pba_cfg rx_pba_cfg; diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c index 2c046b0b5d2..62206273d88 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82598.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -298,7 +298,6 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, reg = IXGBE_READ_REG(hw, IXGBE_RMCS); reg &= ~IXGBE_RMCS_TFCE_802_3X; /* correct the reporting of our flow control status */ - hw->fc.type = ixgbe_fc_none; reg |= IXGBE_RMCS_TFCE_PRIORITY; IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg); diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ixgbe/ixgbe_dcb_82598.h index 1e6a313719d..ebbe53c352a 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82598.h +++ b/drivers/net/ixgbe/ixgbe_dcb_82598.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c new file mode 100644 index 00000000000..470b676c1da --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c @@ -0,0 +1,467 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe.h" +#include "ixgbe_type.h" +#include "ixgbe_dcb.h" +#include "ixgbe_dcb_82599.h" + +/** + * ixgbe_dcb_get_tc_stats_82599 - Returns status for each traffic class + * @hw: pointer to hardware structure + * @stats: pointer to statistics structure + * @tc_count: Number of elements in bwg_array. + * + * This function returns the status data for each of the Traffic Classes in use. + */ +s32 ixgbe_dcb_get_tc_stats_82599(struct ixgbe_hw *hw, + struct ixgbe_hw_stats *stats, + u8 tc_count) +{ + int tc; + + if (tc_count > MAX_TRAFFIC_CLASS) + return DCB_ERR_PARAM; + /* Statistics pertaining to each traffic class */ + for (tc = 0; tc < tc_count; tc++) { + /* Transmitted Packets */ + stats->qptc[tc] += IXGBE_READ_REG(hw, IXGBE_QPTC(tc)); + /* Transmitted Bytes */ + stats->qbtc[tc] += IXGBE_READ_REG(hw, IXGBE_QBTC(tc)); + /* Received Packets */ + stats->qprc[tc] += IXGBE_READ_REG(hw, IXGBE_QPRC(tc)); + /* Received Bytes */ + stats->qbrc[tc] += IXGBE_READ_REG(hw, IXGBE_QBRC(tc)); + } + + return 0; +} + +/** + * ixgbe_dcb_get_pfc_stats_82599 - Return CBFC status data + * @hw: pointer to hardware structure + * @stats: pointer to statistics structure + * @tc_count: Number of elements in bwg_array. + * + * This function returns the CBFC status data for each of the Traffic Classes. + */ +s32 ixgbe_dcb_get_pfc_stats_82599(struct ixgbe_hw *hw, + struct ixgbe_hw_stats *stats, + u8 tc_count) +{ + int tc; + + if (tc_count > MAX_TRAFFIC_CLASS) + return DCB_ERR_PARAM; + for (tc = 0; tc < tc_count; tc++) { + /* Priority XOFF Transmitted */ + stats->pxofftxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(tc)); + /* Priority XOFF Received */ + stats->pxoffrxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(tc)); + } + + return 0; +} + +/** + * ixgbe_dcb_config_packet_buffers_82599 - Configure DCB packet buffers + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure packet buffers for DCB mode. + */ +s32 ixgbe_dcb_config_packet_buffers_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config) +{ + s32 ret_val = 0; + u32 value = IXGBE_RXPBSIZE_64KB; + u8 i = 0; + + /* Setup Rx packet buffer sizes */ + switch (dcb_config->rx_pba_cfg) { + case pba_80_48: + /* Setup the first four at 80KB */ + value = IXGBE_RXPBSIZE_80KB; + for (; i < 4; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), value); + /* Setup the last four at 48KB...don't re-init i */ + value = IXGBE_RXPBSIZE_48KB; + /* Fall Through */ + case pba_equal: + default: + for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), value); + + /* Setup Tx packet buffer sizes */ + for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) { + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), + IXGBE_TXPBSIZE_20KB); + IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), + IXGBE_TXPBTHRESH_DCB); + } + break; + } + + return ret_val; +} + +/** + * ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure Rx Packet Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config) +{ + struct tc_bw_alloc *p; + u32 reg = 0; + u32 credit_refill = 0; + u32 credit_max = 0; + u8 i = 0; + + /* Disable the arbiter before changing parameters */ + IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, IXGBE_RTRPCS_ARBDIS); + + /* Map all traffic classes to their UP, 1 to 1 */ + reg = 0; + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + reg |= (i << (i * IXGBE_RTRUP2TC_UP_SHIFT)); + IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg); + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + p = &dcb_config->tc_config[i].path[DCB_RX_CONFIG]; + + credit_refill = p->data_credits_refill; + credit_max = p->data_credits_max; + reg = credit_refill | (credit_max << IXGBE_RTRPT4C_MCL_SHIFT); + + reg |= (u32)(p->bwg_id) << IXGBE_RTRPT4C_BWG_SHIFT; + + if (p->prio_type == prio_link) + reg |= IXGBE_RTRPT4C_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_RTRPT4C(i), reg); + } + + /* + * Configure Rx packet plane (recycle mode; WSP) and + * enable arbiter + */ + reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC; + IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg); + + return 0; +} + +/** + * ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure Tx Descriptor Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config) +{ + struct tc_bw_alloc *p; + u32 reg, max_credits; + u8 i; + + /* Disable the arbiter before changing parameters */ + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, IXGBE_RTTDCS_ARBDIS); + + /* Clear the per-Tx queue credits; we use per-TC instead */ + for (i = 0; i < 128; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); + IXGBE_WRITE_REG(hw, IXGBE_RTTDT1C, 0); + } + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + p = &dcb_config->tc_config[i].path[DCB_TX_CONFIG]; + max_credits = dcb_config->tc_config[i].desc_credits_max; + reg = max_credits << IXGBE_RTTDT2C_MCL_SHIFT; + reg |= p->data_credits_refill; + reg |= (u32)(p->bwg_id) << IXGBE_RTTDT2C_BWG_SHIFT; + + if (p->prio_type == prio_group) + reg |= IXGBE_RTTDT2C_GSP; + + if (p->prio_type == prio_link) + reg |= IXGBE_RTTDT2C_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_RTTDT2C(i), reg); + } + + /* + * Configure Tx descriptor plane (recycle mode; WSP) and + * enable arbiter + */ + reg = IXGBE_RTTDCS_TDPAC | IXGBE_RTTDCS_TDRM; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg); + + return 0; +} + +/** + * ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure Tx Packet Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config) +{ + struct tc_bw_alloc *p; + u32 reg; + u8 i; + + /* Disable the arbiter before changing parameters */ + IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, IXGBE_RTTPCS_ARBDIS); + + /* Map all traffic classes to their UP, 1 to 1 */ + reg = 0; + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + reg |= (i << (i * IXGBE_RTTUP2TC_UP_SHIFT)); + IXGBE_WRITE_REG(hw, IXGBE_RTTUP2TC, reg); + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + p = &dcb_config->tc_config[i].path[DCB_TX_CONFIG]; + reg = p->data_credits_refill; + reg |= (u32)(p->data_credits_max) << IXGBE_RTTPT2C_MCL_SHIFT; + reg |= (u32)(p->bwg_id) << IXGBE_RTTPT2C_BWG_SHIFT; + + if (p->prio_type == prio_group) + reg |= IXGBE_RTTPT2C_GSP; + + if (p->prio_type == prio_link) + reg |= IXGBE_RTTPT2C_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_RTTPT2C(i), reg); + } + + /* + * Configure Tx packet plane (recycle mode; SP; arb delay) and + * enable arbiter + */ + reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM | + (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT); + IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg); + + return 0; +} + +/** + * ixgbe_dcb_config_pfc_82599 - Configure priority flow control + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure Priority Flow Control (PFC) for each traffic class. + */ +s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config) +{ + u32 i, reg; + + /* If PFC is disabled globally then fall back to LFC. */ + if (!dcb_config->pfc_mode_enable) { + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + hw->mac.ops.setup_fc(hw, i); + goto out; + } + + /* Configure PFC Tx thresholds per TC */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + /* Config and remember Tx */ + if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full || + dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) { + reg = hw->fc.high_water | IXGBE_FCRTH_FCEN; + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg); + reg = hw->fc.low_water | IXGBE_FCRTL_XONE; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg); + } else { + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); + } + } + + /* Configure pause time (2 TCs per register) */ + reg = hw->fc.pause_time | (hw->fc.pause_time << 16); + for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++) + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); + + /* Configure flow control refresh threshold value */ + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); + + /* Enable Transmit PFC */ + reg = IXGBE_FCCFG_TFCE_PRIORITY; + IXGBE_WRITE_REG(hw, IXGBE_FCCFG, reg); + + /* + * Enable Receive PFC + * We will always honor XOFF frames we receive when + * we are in PFC mode. + */ + reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); + reg &= ~IXGBE_MFLCN_RFCE; + reg |= IXGBE_MFLCN_RPFCE; + IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg); +out: + return 0; +} + +/** + * ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics + * @hw: pointer to hardware structure + * + * Configure queue statistics registers, all queues belonging to same traffic + * class uses a single set of queue statistics counters. + */ +s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw) +{ + u32 reg = 0; + u8 i = 0; + + /* + * Receive Queues stats setting + * 32 RQSMR registers, each configuring 4 queues. + * Set all 16 queues of each TC to the same stat + * with TC 'n' going to stat 'n'. + */ + for (i = 0; i < 32; i++) { + reg = 0x01010101 * (i / 4); + IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg); + } + /* + * Transmit Queues stats setting + * 32 TQSM registers, each controlling 4 queues. + * Set all queues of each TC to the same stat + * with TC 'n' going to stat 'n'. + * Tx queues are allocated non-uniformly to TCs: + * 32, 32, 16, 16, 8, 8, 8, 8. + */ + for (i = 0; i < 32; i++) { + if (i < 8) + reg = 0x00000000; + else if (i < 16) + reg = 0x01010101; + else if (i < 20) + reg = 0x02020202; + else if (i < 24) + reg = 0x03030303; + else if (i < 26) + reg = 0x04040404; + else if (i < 28) + reg = 0x05050505; + else if (i < 30) + reg = 0x06060606; + else + reg = 0x07070707; + IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg); + } + + return 0; +} + +/** + * ixgbe_dcb_config_82599 - Configure general DCB parameters + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure general DCB parameters. + */ +s32 ixgbe_dcb_config_82599(struct ixgbe_hw *hw) +{ + u32 reg; + u32 q; + + /* Disable the Tx desc arbiter so that MTQC can be changed */ + reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + reg |= IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg); + + /* Enable DCB for Rx with 8 TCs */ + reg = IXGBE_READ_REG(hw, IXGBE_MRQC); + switch (reg & IXGBE_MRQC_MRQE_MASK) { + case 0: + case IXGBE_MRQC_RT4TCEN: + /* RSS disabled cases */ + reg = (reg & ~IXGBE_MRQC_MRQE_MASK) | IXGBE_MRQC_RT8TCEN; + break; + case IXGBE_MRQC_RSSEN: + case IXGBE_MRQC_RTRSS4TCEN: + /* RSS enabled cases */ + reg = (reg & ~IXGBE_MRQC_MRQE_MASK) | IXGBE_MRQC_RTRSS8TCEN; + break; + default: + /* Unsupported value, assume stale data, overwrite no RSS */ + reg = (reg & ~IXGBE_MRQC_MRQE_MASK) | IXGBE_MRQC_RT8TCEN; + } + IXGBE_WRITE_REG(hw, IXGBE_MRQC, reg); + + /* Enable DCB for Tx with 8 TCs */ + reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ; + IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg); + + /* Disable drop for all queues */ + for (q = 0; q < 128; q++) + IXGBE_WRITE_REG(hw, IXGBE_QDE, q << IXGBE_QDE_IDX_SHIFT); + + /* Enable the Tx desc arbiter */ + reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + reg &= ~IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg); + + return 0; +} + +/** + * ixgbe_dcb_hw_config_82599 - Configure and enable DCB + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure dcb settings and enable dcb mode. + */ +s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config) +{ + ixgbe_dcb_config_packet_buffers_82599(hw, dcb_config); + ixgbe_dcb_config_82599(hw); + ixgbe_dcb_config_rx_arbiter_82599(hw, dcb_config); + ixgbe_dcb_config_tx_desc_arbiter_82599(hw, dcb_config); + ixgbe_dcb_config_tx_data_arbiter_82599(hw, dcb_config); + ixgbe_dcb_config_pfc_82599(hw, dcb_config); + ixgbe_dcb_config_tc_stats_82599(hw); + + return 0; +} + diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h new file mode 100644 index 00000000000..9e5e2827e4a --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h @@ -0,0 +1,127 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _DCB_82599_CONFIG_H_ +#define _DCB_82599_CONFIG_H_ + +/* DCB register definitions */ +#define IXGBE_RTTDCS_TDPAC 0x00000001 /* 0 Round Robin, + * 1 WSP - Weighted Strict Priority + */ +#define IXGBE_RTTDCS_VMPAC 0x00000002 /* 0 Round Robin, + * 1 WRR - Weighted Round Robin + */ +#define IXGBE_RTTDCS_TDRM 0x00000010 /* Transmit Recycle Mode */ +#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */ +#define IXGBE_RTTDCS_BDPM 0x00400000 /* Bypass Data Pipe - must clear! */ +#define IXGBE_RTTDCS_BPBFSM 0x00800000 /* Bypass PB Free Space - must + * clear! + */ +#define IXGBE_RTTDCS_SPEED_CHG 0x80000000 /* Link speed change */ + +/* Receive UP2TC mapping */ +#define IXGBE_RTRUP2TC_UP_SHIFT 3 +/* Transmit UP2TC mapping */ +#define IXGBE_RTTUP2TC_UP_SHIFT 3 + +#define IXGBE_RTRPT4C_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */ +#define IXGBE_RTRPT4C_BWG_SHIFT 9 /* Offset to BWG index */ +#define IXGBE_RTRPT4C_GSP 0x40000000 /* GSP enable bit */ +#define IXGBE_RTRPT4C_LSP 0x80000000 /* LSP enable bit */ + +#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet + * buffers enable + */ +#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores + * (RSS) enable + */ + +/* RTRPCS Bit Masks */ +#define IXGBE_RTRPCS_RRM 0x00000002 /* Receive Recycle Mode enable */ +/* Receive Arbitration Control: 0 Round Robin, 1 DFP */ +#define IXGBE_RTRPCS_RAC 0x00000004 +#define IXGBE_RTRPCS_ARBDIS 0x00000040 /* Arbitration disable bit */ + +/* RTTDT2C Bit Masks */ +#define IXGBE_RTTDT2C_MCL_SHIFT 12 +#define IXGBE_RTTDT2C_BWG_SHIFT 9 +#define IXGBE_RTTDT2C_GSP 0x40000000 +#define IXGBE_RTTDT2C_LSP 0x80000000 + +#define IXGBE_RTTPT2C_MCL_SHIFT 12 +#define IXGBE_RTTPT2C_BWG_SHIFT 9 +#define IXGBE_RTTPT2C_GSP 0x40000000 +#define IXGBE_RTTPT2C_LSP 0x80000000 + +/* RTTPCS Bit Masks */ +#define IXGBE_RTTPCS_TPPAC 0x00000020 /* 0 Round Robin, + * 1 SP - Strict Priority + */ +#define IXGBE_RTTPCS_ARBDIS 0x00000040 /* Arbiter disable */ +#define IXGBE_RTTPCS_TPRM 0x00000100 /* Transmit Recycle Mode enable */ +#define IXGBE_RTTPCS_ARBD_SHIFT 22 +#define IXGBE_RTTPCS_ARBD_DCB 0x4 /* Arbitration delay in DCB mode */ + +#define IXGBE_TXPBSIZE_20KB 0x00005000 /* 20KB Packet Buffer */ +#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */ +#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */ +#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */ +#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */ +#define IXGBE_RXPBSIZE_128KB 0x00020000 /* 128KB Packet Buffer */ + +#define IXGBE_TXPBTHRESH_DCB 0xA /* THRESH value for DCB mode */ + + +/* DCB hardware-specific driver APIs */ + +/* DCB PFC functions */ +s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config); +s32 ixgbe_dcb_get_pfc_stats_82599(struct ixgbe_hw *hw, + struct ixgbe_hw_stats *stats, + u8 tc_count); + +/* DCB traffic class stats */ +s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw); +s32 ixgbe_dcb_get_tc_stats_82599(struct ixgbe_hw *hw, + struct ixgbe_hw_stats *stats, + u8 tc_count); + +/* DCB config arbiters */ +s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config); +s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config); +s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config); + + +/* DCB hw initialization */ +s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *config); + +#endif /* _DCB_82599_CONFIG_H */ diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 4129976953f..0a8731f1f23 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -35,6 +35,7 @@ #define BIT_PG_RX 0x04 #define BIT_PG_TX 0x08 #define BIT_BCN 0x10 +#define BIT_LINKSPEED 0x80 int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, struct ixgbe_dcb_config *dst_dcb_cfg, int tc_max) @@ -89,25 +90,6 @@ int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, src_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc; } - for (i = DCB_BCN_ATTR_RP_0; i < DCB_BCN_ATTR_RP_ALL; i++) { - dst_dcb_cfg->bcn.rp_admin_mode[i - DCB_BCN_ATTR_RP_0] = - src_dcb_cfg->bcn.rp_admin_mode[i - DCB_BCN_ATTR_RP_0]; - } - dst_dcb_cfg->bcn.bcna_option[0] = src_dcb_cfg->bcn.bcna_option[0]; - dst_dcb_cfg->bcn.bcna_option[1] = src_dcb_cfg->bcn.bcna_option[1]; - dst_dcb_cfg->bcn.rp_alpha = src_dcb_cfg->bcn.rp_alpha; - dst_dcb_cfg->bcn.rp_beta = src_dcb_cfg->bcn.rp_beta; - dst_dcb_cfg->bcn.rp_gd = src_dcb_cfg->bcn.rp_gd; - dst_dcb_cfg->bcn.rp_gi = src_dcb_cfg->bcn.rp_gi; - dst_dcb_cfg->bcn.rp_tmax = src_dcb_cfg->bcn.rp_tmax; - dst_dcb_cfg->bcn.rp_td = src_dcb_cfg->bcn.rp_td; - dst_dcb_cfg->bcn.rp_rmin = src_dcb_cfg->bcn.rp_rmin; - dst_dcb_cfg->bcn.rp_w = src_dcb_cfg->bcn.rp_w; - dst_dcb_cfg->bcn.rp_rd = src_dcb_cfg->bcn.rp_rd; - dst_dcb_cfg->bcn.rp_ru = src_dcb_cfg->bcn.rp_ru; - dst_dcb_cfg->bcn.rp_wrtt = src_dcb_cfg->bcn.rp_wrtt; - dst_dcb_cfg->bcn.rp_ri = src_dcb_cfg->bcn.rp_ri; - return 0; } @@ -120,12 +102,6 @@ static u8 ixgbe_dcbnl_get_state(struct net_device *netdev) return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED); } -static u16 ixgbe_dcb_select_queue(struct net_device *dev, struct sk_buff *skb) -{ - /* All traffic should default to class 0 */ - return 0; -} - static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) { u8 err = 0; @@ -153,8 +129,8 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) kfree(adapter->rx_ring); adapter->tx_ring = NULL; adapter->rx_ring = NULL; - netdev->select_queue = &ixgbe_dcb_select_queue; + adapter->hw.fc.requested_mode = ixgbe_fc_pfc; adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; adapter->flags |= IXGBE_FLAG_DCB_ENABLED; ixgbe_init_interrupt_scheme(adapter); @@ -163,6 +139,7 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) } else { /* Turn off DCB */ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + adapter->hw.fc.requested_mode = ixgbe_fc_default; if (netif_running(netdev)) netdev->netdev_ops->ndo_stop(netdev); ixgbe_reset_interrupt_capability(adapter); @@ -172,7 +149,6 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) kfree(adapter->rx_ring); adapter->tx_ring = NULL; adapter->rx_ring = NULL; - netdev->select_queue = NULL; adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; adapter->flags |= IXGBE_FLAG_RSS_ENABLED; @@ -444,175 +420,6 @@ static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state) return; } -static void ixgbe_dcbnl_getbcnrp(struct net_device *netdev, int priority, - u8 *setting) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - *setting = adapter->dcb_cfg.bcn.rp_admin_mode[priority]; -} - - -static void ixgbe_dcbnl_getbcncfg(struct net_device *netdev, int enum_index, - u32 *setting) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - switch (enum_index) { - case DCB_BCN_ATTR_BCNA_0: - *setting = adapter->dcb_cfg.bcn.bcna_option[0]; - break; - case DCB_BCN_ATTR_BCNA_1: - *setting = adapter->dcb_cfg.bcn.bcna_option[1]; - break; - case DCB_BCN_ATTR_ALPHA: - *setting = adapter->dcb_cfg.bcn.rp_alpha; - break; - case DCB_BCN_ATTR_BETA: - *setting = adapter->dcb_cfg.bcn.rp_beta; - break; - case DCB_BCN_ATTR_GD: - *setting = adapter->dcb_cfg.bcn.rp_gd; - break; - case DCB_BCN_ATTR_GI: - *setting = adapter->dcb_cfg.bcn.rp_gi; - break; - case DCB_BCN_ATTR_TMAX: - *setting = adapter->dcb_cfg.bcn.rp_tmax; - break; - case DCB_BCN_ATTR_TD: - *setting = adapter->dcb_cfg.bcn.rp_td; - break; - case DCB_BCN_ATTR_RMIN: - *setting = adapter->dcb_cfg.bcn.rp_rmin; - break; - case DCB_BCN_ATTR_W: - *setting = adapter->dcb_cfg.bcn.rp_w; - break; - case DCB_BCN_ATTR_RD: - *setting = adapter->dcb_cfg.bcn.rp_rd; - break; - case DCB_BCN_ATTR_RU: - *setting = adapter->dcb_cfg.bcn.rp_ru; - break; - case DCB_BCN_ATTR_WRTT: - *setting = adapter->dcb_cfg.bcn.rp_wrtt; - break; - case DCB_BCN_ATTR_RI: - *setting = adapter->dcb_cfg.bcn.rp_ri; - break; - default: - *setting = -1; - } -} - -static void ixgbe_dcbnl_setbcnrp(struct net_device *netdev, int priority, - u8 setting) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - adapter->temp_dcb_cfg.bcn.rp_admin_mode[priority] = setting; - - if (adapter->temp_dcb_cfg.bcn.rp_admin_mode[priority] != - adapter->dcb_cfg.bcn.rp_admin_mode[priority]) - adapter->dcb_set_bitmap |= BIT_BCN; -} - -static void ixgbe_dcbnl_setbcncfg(struct net_device *netdev, int enum_index, - u32 setting) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - - switch (enum_index) { - case DCB_BCN_ATTR_BCNA_0: - adapter->temp_dcb_cfg.bcn.bcna_option[0] = setting; - if (adapter->temp_dcb_cfg.bcn.bcna_option[0] != - adapter->dcb_cfg.bcn.bcna_option[0]) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_BCNA_1: - adapter->temp_dcb_cfg.bcn.bcna_option[1] = setting; - if (adapter->temp_dcb_cfg.bcn.bcna_option[1] != - adapter->dcb_cfg.bcn.bcna_option[1]) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_ALPHA: - adapter->temp_dcb_cfg.bcn.rp_alpha = setting; - if (adapter->temp_dcb_cfg.bcn.rp_alpha != - adapter->dcb_cfg.bcn.rp_alpha) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_BETA: - adapter->temp_dcb_cfg.bcn.rp_beta = setting; - if (adapter->temp_dcb_cfg.bcn.rp_beta != - adapter->dcb_cfg.bcn.rp_beta) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_GD: - adapter->temp_dcb_cfg.bcn.rp_gd = setting; - if (adapter->temp_dcb_cfg.bcn.rp_gd != - adapter->dcb_cfg.bcn.rp_gd) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_GI: - adapter->temp_dcb_cfg.bcn.rp_gi = setting; - if (adapter->temp_dcb_cfg.bcn.rp_gi != - adapter->dcb_cfg.bcn.rp_gi) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_TMAX: - adapter->temp_dcb_cfg.bcn.rp_tmax = setting; - if (adapter->temp_dcb_cfg.bcn.rp_tmax != - adapter->dcb_cfg.bcn.rp_tmax) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_TD: - adapter->temp_dcb_cfg.bcn.rp_td = setting; - if (adapter->temp_dcb_cfg.bcn.rp_td != - adapter->dcb_cfg.bcn.rp_td) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_RMIN: - adapter->temp_dcb_cfg.bcn.rp_rmin = setting; - if (adapter->temp_dcb_cfg.bcn.rp_rmin != - adapter->dcb_cfg.bcn.rp_rmin) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_W: - adapter->temp_dcb_cfg.bcn.rp_w = setting; - if (adapter->temp_dcb_cfg.bcn.rp_w != - adapter->dcb_cfg.bcn.rp_w) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_RD: - adapter->temp_dcb_cfg.bcn.rp_rd = setting; - if (adapter->temp_dcb_cfg.bcn.rp_rd != - adapter->dcb_cfg.bcn.rp_rd) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_RU: - adapter->temp_dcb_cfg.bcn.rp_ru = setting; - if (adapter->temp_dcb_cfg.bcn.rp_ru != - adapter->dcb_cfg.bcn.rp_ru) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_WRTT: - adapter->temp_dcb_cfg.bcn.rp_wrtt = setting; - if (adapter->temp_dcb_cfg.bcn.rp_wrtt != - adapter->dcb_cfg.bcn.rp_wrtt) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - case DCB_BCN_ATTR_RI: - adapter->temp_dcb_cfg.bcn.rp_ri = setting; - if (adapter->temp_dcb_cfg.bcn.rp_ri != - adapter->dcb_cfg.bcn.rp_ri) - adapter->dcb_set_bitmap |= BIT_BCN; - break; - default: - break; - } -} - struct dcbnl_rtnl_ops dcbnl_ops = { .getstate = ixgbe_dcbnl_get_state, .setstate = ixgbe_dcbnl_set_state, @@ -633,9 +440,5 @@ struct dcbnl_rtnl_ops dcbnl_ops = { .setnumtcs = ixgbe_dcbnl_setnumtcs, .getpfcstate = ixgbe_dcbnl_getpfcstate, .setpfcstate = ixgbe_dcbnl_setpfcstate, - .getbcncfg = ixgbe_dcbnl_getbcncfg, - .getbcnrp = ixgbe_dcbnl_getbcnrp, - .setbcncfg = ixgbe_dcbnl_setbcncfg, - .setbcnrp = ixgbe_dcbnl_setbcnrp }; diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 67f87a79154..18ecba7f6ec 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -89,8 +89,7 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = { {"rx_header_split", IXGBE_STAT(rx_hdr_split)}, {"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)}, {"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)}, - {"lro_aggregated", IXGBE_STAT(lro_aggregated)}, - {"lro_flushed", IXGBE_STAT(lro_flushed)}, + {"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)}, }; #define IXGBE_QUEUE_STATS_LEN \ @@ -132,6 +131,26 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_1000baseT_Full; ecmd->port = PORT_TP; + } else if (hw->phy.media_type == ixgbe_media_type_backplane) { + /* Set as FIBRE until SERDES defined in kernel */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82598: + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + break; + case IXGBE_DEV_ID_82598_BX: + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + ecmd->autoneg = AUTONEG_DISABLE; + break; + } } else { ecmd->supported |= SUPPORTED_FIBRE; ecmd->advertising = (ADVERTISED_10000baseT_Full | @@ -206,13 +225,13 @@ static void ixgbe_get_pauseparam(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; - pause->autoneg = (hw->fc.type == ixgbe_fc_full ? 1 : 0); + pause->autoneg = (hw->fc.current_mode == ixgbe_fc_full ? 1 : 0); - if (hw->fc.type == ixgbe_fc_rx_pause) { + if (hw->fc.current_mode == ixgbe_fc_rx_pause) { pause->rx_pause = 1; - } else if (hw->fc.type == ixgbe_fc_tx_pause) { + } else if (hw->fc.current_mode == ixgbe_fc_tx_pause) { pause->tx_pause = 1; - } else if (hw->fc.type == ixgbe_fc_full) { + } else if (hw->fc.current_mode == ixgbe_fc_full) { pause->rx_pause = 1; pause->tx_pause = 1; } @@ -226,22 +245,17 @@ static int ixgbe_set_pauseparam(struct net_device *netdev, if ((pause->autoneg == AUTONEG_ENABLE) || (pause->rx_pause && pause->tx_pause)) - hw->fc.type = ixgbe_fc_full; + hw->fc.requested_mode = ixgbe_fc_full; else if (pause->rx_pause && !pause->tx_pause) - hw->fc.type = ixgbe_fc_rx_pause; + hw->fc.requested_mode = ixgbe_fc_rx_pause; else if (!pause->rx_pause && pause->tx_pause) - hw->fc.type = ixgbe_fc_tx_pause; + hw->fc.requested_mode = ixgbe_fc_tx_pause; else if (!pause->rx_pause && !pause->tx_pause) - hw->fc.type = ixgbe_fc_none; + hw->fc.requested_mode = ixgbe_fc_none; else return -EINVAL; - hw->fc.original_type = hw->fc.type; - - if (netif_running(netdev)) - ixgbe_reinit_locked(adapter); - else - ixgbe_reset(adapter); + hw->mac.ops.setup_fc(hw, 0); return 0; } @@ -456,7 +470,7 @@ static void ixgbe_get_regs(struct net_device *netdev, regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT); regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL); regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM); - regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT); + regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0)); regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS); regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS); @@ -661,10 +675,17 @@ static void ixgbe_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct ixgbe_adapter *adapter = netdev_priv(netdev); + char firmware_version[32]; strncpy(drvinfo->driver, ixgbe_driver_name, 32); strncpy(drvinfo->version, ixgbe_driver_version, 32); - strncpy(drvinfo->fw_version, "N/A", 32); + + sprintf(firmware_version, "%d.%d-%d", + (adapter->eeprom_version & 0xF000) >> 12, + (adapter->eeprom_version & 0x0FF0) >> 4, + adapter->eeprom_version & 0x000F); + + strncpy(drvinfo->fw_version, firmware_version, 32); strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); drvinfo->n_stats = IXGBE_STATS_LEN; drvinfo->regdump_len = ixgbe_get_regs_len(netdev); @@ -808,15 +829,6 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev, int stat_count = sizeof(struct ixgbe_queue_stats) / sizeof(u64); int j, k; int i; - u64 aggregated = 0, flushed = 0, no_desc = 0; - for (i = 0; i < adapter->num_rx_queues; i++) { - aggregated += adapter->rx_ring[i].lro_mgr.stats.aggregated; - flushed += adapter->rx_ring[i].lro_mgr.stats.flushed; - no_desc += adapter->rx_ring[i].lro_mgr.stats.no_desc; - } - adapter->lro_aggregated = aggregated; - adapter->lro_flushed = flushed; - adapter->lro_no_desc = no_desc; ixgbe_update_stats(adapter); for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { @@ -897,12 +909,50 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, static void ixgbe_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { - wol->supported = 0; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC; wol->wolopts = 0; + if (!device_can_wakeup(&adapter->pdev->dev)) + return; + + if (adapter->wol & IXGBE_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & IXGBE_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & IXGBE_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & IXGBE_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + return; } +static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= IXGBE_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= IXGBE_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= IXGBE_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= IXGBE_WUFC_MAG; + + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + static int ixgbe_nway_reset(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -965,40 +1015,47 @@ static int ixgbe_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; int i; if (ec->tx_max_coalesced_frames_irq) adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq; if (ec->rx_coalesce_usecs > 1) { + /* check the limits */ + if ((1000000/ec->rx_coalesce_usecs > IXGBE_MAX_INT_RATE) || + (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE)) + return -EINVAL; + /* store the value in ints/second */ adapter->eitr_param = 1000000/ec->rx_coalesce_usecs; /* static value of interrupt rate */ adapter->itr_setting = adapter->eitr_param; - /* clear the lower bit */ + /* clear the lower bit as its used for dynamic state */ adapter->itr_setting &= ~1; } else if (ec->rx_coalesce_usecs == 1) { /* 1 means dynamic mode */ adapter->eitr_param = 20000; adapter->itr_setting = 1; } else { - /* any other value means disable eitr, which is best - * served by setting the interrupt rate very high */ - adapter->eitr_param = 3000000; + /* + * any other value means disable eitr, which is best + * served by setting the interrupt rate very high + */ + adapter->eitr_param = IXGBE_MAX_INT_RATE; adapter->itr_setting = 0; } for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) { struct ixgbe_q_vector *q_vector = &adapter->q_vector[i]; if (q_vector->txr_count && !q_vector->rxr_count) + /* tx vector gets half the rate */ q_vector->eitr = (adapter->eitr_param >> 1); else /* rx only or mixed */ q_vector->eitr = adapter->eitr_param; - IXGBE_WRITE_REG(hw, IXGBE_EITR(i), - EITR_INTS_PER_SEC_TO_REG(q_vector->eitr)); + ixgbe_write_eitr(adapter, i, + EITR_INTS_PER_SEC_TO_REG(q_vector->eitr)); } return 0; @@ -1012,6 +1069,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = { .get_regs_len = ixgbe_get_regs_len, .get_regs = ixgbe_get_regs, .get_wol = ixgbe_get_wol, + .set_wol = ixgbe_set_wol, .nway_reset = ixgbe_nway_reset, .get_link = ethtool_op_get_link, .get_eeprom_len = ixgbe_get_eeprom_len, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 5d364a96e35..79aa811c403 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -47,12 +47,13 @@ char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = "Intel(R) 10 Gigabit PCI Express Network Driver"; -#define DRV_VERSION "1.3.30-k2" +#define DRV_VERSION "2.0.8-k2" const char ixgbe_driver_version[] = DRV_VERSION; -static char ixgbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation."; +static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598] = &ixgbe_82598_info, + [board_82599] = &ixgbe_82599_info, }; /* ixgbe_pci_tbl - PCI Device ID Table @@ -64,6 +65,8 @@ static const struct ixgbe_info *ixgbe_info_tbl[] = { * Class, Class Mask, private data (not used) } */ static struct pci_device_id ixgbe_pci_tbl[] = { + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598), + board_82598 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT), board_82598 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT), @@ -82,6 +85,12 @@ static struct pci_device_id ixgbe_pci_tbl[] = { board_82598 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX), + board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4), + board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP), + board_82599 }, /* required last entry */ {0, } @@ -125,17 +134,53 @@ static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); } -static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, u16 int_alloc_entry, - u8 msix_vector) +/* + * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors + * @adapter: pointer to adapter struct + * @direction: 0 for Rx, 1 for Tx, -1 for other causes + * @queue: queue to map the corresponding interrupt to + * @msix_vector: the vector to map to the corresponding queue + * + */ +static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction, + u8 queue, u8 msix_vector) { u32 ivar, index; - - msix_vector |= IXGBE_IVAR_ALLOC_VAL; - index = (int_alloc_entry >> 2) & 0x1F; - ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR(index)); - ivar &= ~(0xFF << (8 * (int_alloc_entry & 0x3))); - ivar |= (msix_vector << (8 * (int_alloc_entry & 0x3))); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR(index), ivar); + struct ixgbe_hw *hw = &adapter->hw; + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + msix_vector |= IXGBE_IVAR_ALLOC_VAL; + if (direction == -1) + direction = 0; + index = (((direction * 64) + queue) >> 2) & 0x1F; + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index)); + ivar &= ~(0xFF << (8 * (queue & 0x3))); + ivar |= (msix_vector << (8 * (queue & 0x3))); + IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar); + break; + case ixgbe_mac_82599EB: + if (direction == -1) { + /* other causes */ + msix_vector |= IXGBE_IVAR_ALLOC_VAL; + index = ((queue & 1) * 8); + ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC); + ivar &= ~(0xFF << index); + ivar |= (msix_vector << index); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar); + break; + } else { + /* tx or rx causes */ + msix_vector |= IXGBE_IVAR_ALLOC_VAL; + index = ((16 * (queue & 1)) + (8 * direction)); + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1)); + ivar &= ~(0xFF << index); + ivar |= (msix_vector << index); + IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar); + break; + } + default: + break; + } } static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, @@ -200,39 +245,39 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, #define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \ MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */ -#define GET_TX_HEAD_FROM_RING(ring) (\ - *(volatile u32 *) \ - ((union ixgbe_adv_tx_desc *)(ring)->desc + (ring)->count)) static void ixgbe_tx_timeout(struct net_device *netdev); /** * ixgbe_clean_tx_irq - Reclaim resources after transmit completes * @adapter: board private structure * @tx_ring: tx ring to clean + * + * returns true if transmit work is done **/ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring) { - union ixgbe_adv_tx_desc *tx_desc; - struct ixgbe_tx_buffer *tx_buffer_info; struct net_device *netdev = adapter->netdev; - struct sk_buff *skb; - unsigned int i; - u32 head, oldhead; - unsigned int count = 0; + union ixgbe_adv_tx_desc *tx_desc, *eop_desc; + struct ixgbe_tx_buffer *tx_buffer_info; + unsigned int i, eop, count = 0; unsigned int total_bytes = 0, total_packets = 0; - rmb(); - head = GET_TX_HEAD_FROM_RING(tx_ring); - head = le32_to_cpu(head); i = tx_ring->next_to_clean; - while (1) { - while (i != head) { + eop = tx_ring->tx_buffer_info[i].next_to_watch; + eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); + + while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) && + (count < tx_ring->work_limit)) { + bool cleaned = false; + for ( ; !cleaned; count++) { + struct sk_buff *skb; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i); tx_buffer_info = &tx_ring->tx_buffer_info[i]; + cleaned = (i == eop); skb = tx_buffer_info->skb; - if (skb) { + if (cleaned && skb) { unsigned int segs, bytecount; /* gso_segs is currently only valid for tcp */ @@ -247,23 +292,17 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info); + tx_desc->wb.status = 0; + i++; if (i == tx_ring->count) i = 0; - - count++; - if (count == tx_ring->count) - goto done_cleaning; } - oldhead = head; - rmb(); - head = GET_TX_HEAD_FROM_RING(tx_ring); - head = le32_to_cpu(head); - if (head == oldhead) - goto done_cleaning; - } /* while (1) */ - -done_cleaning: + + eop = tx_ring->tx_buffer_info[i].next_to_watch; + eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); + } + tx_ring->next_to_clean = i; #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) @@ -291,17 +330,16 @@ done_cleaning: } /* re-arm the interrupt */ - if ((total_packets >= tx_ring->work_limit) || - (count == tx_ring->count)) + if (count >= tx_ring->work_limit) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->v_idx); tx_ring->total_bytes += total_bytes; tx_ring->total_packets += total_packets; - tx_ring->stats.bytes += total_bytes; tx_ring->stats.packets += total_packets; + tx_ring->stats.bytes += total_bytes; adapter->net_stats.tx_bytes += total_bytes; adapter->net_stats.tx_packets += total_packets; - return (total_packets ? true : false); + return (count < tx_ring->work_limit); } #ifdef CONFIG_IXGBE_DCA @@ -314,13 +352,19 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, if (rx_ring->cpu != cpu) { rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q)); - rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK; - rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK; + rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK_82599; + rxctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) << + IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599); + } rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN); rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | - IXGBE_DCA_RXCTRL_DESC_HSRO_EN); + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl); rx_ring->cpu = cpu; } @@ -336,8 +380,14 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, if (tx_ring->cpu != cpu) { txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); - txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; - txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; + txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599; + txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) << + IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + } txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); tx_ring->cpu = cpu; @@ -403,23 +453,21 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) * @rx_ring: rx descriptor ring (for a specific queue) to setup * @rx_desc: rx descriptor **/ -static void ixgbe_receive_skb(struct ixgbe_adapter *adapter, +static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector, struct sk_buff *skb, u8 status, - struct ixgbe_ring *ring, union ixgbe_adv_rx_desc *rx_desc) { + struct ixgbe_adapter *adapter = q_vector->adapter; + struct napi_struct *napi = &q_vector->napi; bool is_vlan = (status & IXGBE_RXD_STAT_VP); u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan); - if (adapter->netdev->features & NETIF_F_LRO && - skb->ip_summed == CHECKSUM_UNNECESSARY) { + skb_record_rx_queue(skb, q_vector - &adapter->q_vector[0]); + if (skb->ip_summed == CHECKSUM_UNNECESSARY) { if (adapter->vlgrp && is_vlan && (tag != 0)) - lro_vlan_hwaccel_receive_skb(&ring->lro_mgr, skb, - adapter->vlgrp, tag, - rx_desc); + vlan_gro_receive(napi, adapter->vlgrp, tag, skb); else - lro_receive_skb(&ring->lro_mgr, skb, rx_desc); - ring->lro_used = true; + napi_gro_receive(napi, skb); } else { if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) { if (adapter->vlgrp && is_vlan && (tag != 0)) @@ -470,6 +518,19 @@ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter, adapter->hw_csum_rx_good++; } +static inline void ixgbe_release_rx_desc(struct ixgbe_hw *hw, + struct ixgbe_ring *rx_ring, u32 val) +{ + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + IXGBE_WRITE_REG(hw, IXGBE_RDT(rx_ring->reg_idx), val); +} + /** * ixgbe_alloc_rx_buffers - Replace used receive buffers; packet split * @adapter: address of board private structure @@ -482,6 +543,7 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, union ixgbe_adv_rx_desc *rx_desc; struct ixgbe_rx_buffer *bi; unsigned int i; + unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN; i = rx_ring->next_to_use; bi = &rx_ring->rx_buffer_info[i]; @@ -511,9 +573,7 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, if (!bi->skb) { struct sk_buff *skb; - skb = netdev_alloc_skb(adapter->netdev, - (rx_ring->rx_buf_len + - NET_IP_ALIGN)); + skb = netdev_alloc_skb(adapter->netdev, bufsz); if (!skb) { adapter->alloc_rx_buff_failed++; @@ -528,8 +588,7 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, skb_reserve(skb, NET_IP_ALIGN); bi->skb = skb; - bi->dma = pci_map_single(pdev, skb->data, - rx_ring->rx_buf_len, + bi->dma = pci_map_single(pdev, skb->data, bufsz, PCI_DMA_FROMDEVICE); } /* Refresh the desc even if buffer_addrs didn't change because @@ -553,14 +612,7 @@ no_buffers: if (i-- == 0) i = (rx_ring->count - 1); - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + ixgbe_release_rx_desc(&adapter->hw, rx_ring, i); } } @@ -574,10 +626,11 @@ static inline u16 ixgbe_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc) return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; } -static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter, +static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, struct ixgbe_ring *rx_ring, int *work_done, int work_to_do) { + struct ixgbe_adapter *adapter = q_vector->adapter; struct pci_dev *pdev = adapter->pdev; union ixgbe_adv_rx_desc *rx_desc, *next_rxd; struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer; @@ -678,7 +731,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter, total_rx_packets++; skb->protocol = eth_type_trans(skb, adapter->netdev); - ixgbe_receive_skb(adapter, skb, staterr, rx_ring, rx_desc); + ixgbe_receive_skb(q_vector, skb, staterr, rx_desc); next_desc: rx_desc->wb.upper.status_error = 0; @@ -696,11 +749,6 @@ next_desc: staterr = le32_to_cpu(rx_desc->wb.upper.status_error); } - if (rx_ring->lro_used) { - lro_flush_all(&rx_ring->lro_mgr); - rx_ring->lro_used = false; - } - rx_ring->next_to_clean = i; cleaned_count = IXGBE_DESC_UNUSED(rx_ring); @@ -731,7 +779,8 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; - /* Populate the IVAR table and set the ITR values to the + /* + * Populate the IVAR table and set the ITR values to the * corresponding register. */ for (v_idx = 0; v_idx < q_vectors; v_idx++) { @@ -742,7 +791,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) for (i = 0; i < q_vector->rxr_count; i++) { j = adapter->rx_ring[r_idx].reg_idx; - ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(j), v_idx); + ixgbe_set_ivar(adapter, 0, j, v_idx); r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues, r_idx + 1); @@ -752,7 +801,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) for (i = 0; i < q_vector->txr_count; i++) { j = adapter->tx_ring[r_idx].reg_idx; - ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(j), v_idx); + ixgbe_set_ivar(adapter, 1, j, v_idx); r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, r_idx + 1); @@ -761,15 +810,23 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) /* if this is a tx only vector halve the interrupt rate */ if (q_vector->txr_count && !q_vector->rxr_count) q_vector->eitr = (adapter->eitr_param >> 1); - else + else if (q_vector->rxr_count) /* rx only */ q_vector->eitr = adapter->eitr_param; + /* + * since this is initial set up don't need to call + * ixgbe_write_eitr helper + */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), EITR_INTS_PER_SEC_TO_REG(q_vector->eitr)); } - ixgbe_set_ivar(adapter, IXGBE_IVAR_OTHER_CAUSES_INDEX, v_idx); + if (adapter->hw.mac.type == ixgbe_mac_82598EB) + ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX, + v_idx); + else if (adapter->hw.mac.type == ixgbe_mac_82599EB) + ixgbe_set_ivar(adapter, -1, 1, v_idx); IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950); /* set up to autoclear timer, and the vectors */ @@ -845,10 +902,35 @@ update_itr_done: return retval; } +/** + * ixgbe_write_eitr - write EITR register in hardware specific way + * @adapter: pointer to adapter struct + * @v_idx: vector index into q_vector array + * @itr_reg: new value to be written in *register* format, not ints/s + * + * This function is made to be called by ethtool and by the driver + * when it needs to update EITR registers at runtime. Hardware + * specific quirks/differences are taken care of here. + */ +void ixgbe_write_eitr(struct ixgbe_adapter *adapter, int v_idx, u32 itr_reg) +{ + struct ixgbe_hw *hw = &adapter->hw; + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + /* must write high and low 16 bits to reset counter */ + itr_reg |= (itr_reg << 16); + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + /* + * set the WDIS bit to not clear the timer bits and cause an + * immediate assertion of the interrupt + */ + itr_reg |= IXGBE_EITR_CNT_WDIS; + } + IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg); +} + static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) { struct ixgbe_adapter *adapter = q_vector->adapter; - struct ixgbe_hw *hw = &adapter->hw; u32 new_itr; u8 current_itr, ret_itr; int i, r_idx, v_idx = ((void *)q_vector - (void *)(adapter->q_vector)) / @@ -903,14 +985,13 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) if (new_itr != q_vector->eitr) { u32 itr_reg; + + /* save the algorithm value here, not the smoothed one */ + q_vector->eitr = new_itr; /* do an exponential smoothing */ new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100); - q_vector->eitr = new_itr; itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr); - /* must write high and low 16 bits to reset counter */ - DPRINTK(TX_ERR, DEBUG, "writing eitr(%d): %08X\n", v_idx, - itr_reg); - IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg | (itr_reg)<<16); + ixgbe_write_eitr(adapter, v_idx, itr_reg); } return; @@ -928,6 +1009,24 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) } } +static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) +{ + struct ixgbe_hw *hw = &adapter->hw; + + if (eicr & IXGBE_EICR_GPI_SDP1) { + /* Clear the interrupt */ + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); + schedule_work(&adapter->multispeed_fiber_task); + } else if (eicr & IXGBE_EICR_GPI_SDP2) { + /* Clear the interrupt */ + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2); + schedule_work(&adapter->sfp_config_module_task); + } else { + /* Interrupt isn't for us... */ + return; + } +} + static void ixgbe_check_lsc(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; @@ -946,13 +1045,25 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data) struct net_device *netdev = data; struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; - u32 eicr = IXGBE_READ_REG(hw, IXGBE_EICR); + u32 eicr; + + /* + * Workaround for Silicon errata. Use clear-by-write instead + * of clear-by-read. Reading with EICS will return the + * interrupt causes without clearing, which later be done + * with the write to EICR. + */ + eicr = IXGBE_READ_REG(hw, IXGBE_EICS); + IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr); if (eicr & IXGBE_EICR_LSC) ixgbe_check_lsc(adapter); - ixgbe_check_fan_failure(adapter, eicr); + if (hw->mac.type == ixgbe_mac_82598EB) + ixgbe_check_fan_failure(adapter, eicr); + if (hw->mac.type == ixgbe_mac_82599EB) + ixgbe_check_sfp_event(adapter, eicr); if (!test_bit(__IXGBE_DOWN, &adapter->state)) IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER); @@ -1015,7 +1126,7 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data) rx_ring = &(adapter->rx_ring[r_idx]); /* disable interrupts on this vector only */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rx_ring->v_idx); - netif_rx_schedule(&q_vector->napi); + napi_schedule(&q_vector->napi); return IRQ_HANDLED; } @@ -1052,12 +1163,12 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) ixgbe_update_rx_dca(adapter, rx_ring); #endif - ixgbe_clean_rx_irq(adapter, rx_ring, &work_done, budget); + ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget); /* If all Rx work done, exit the polling mode */ if (work_done < budget) { - netif_rx_complete(napi); - if (adapter->itr_setting & 3) + napi_complete(napi); + if (adapter->itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rx_ring->v_idx); @@ -1095,7 +1206,7 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) ixgbe_update_rx_dca(adapter, rx_ring); #endif - ixgbe_clean_rx_irq(adapter, rx_ring, &work_done, budget); + ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget); enable_mask |= rx_ring->v_idx; r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues, r_idx + 1); @@ -1105,8 +1216,8 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget) rx_ring = &(adapter->rx_ring[r_idx]); /* If all Rx work done, exit the polling mode */ if (work_done < budget) { - netif_rx_complete(napi); - if (adapter->itr_setting & 3) + napi_complete(napi); + if (adapter->itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, enable_mask); @@ -1276,7 +1387,6 @@ out: static void ixgbe_set_itr(struct ixgbe_adapter *adapter) { - struct ixgbe_hw *hw = &adapter->hw; struct ixgbe_q_vector *q_vector = adapter->q_vector; u8 current_itr; u32 new_itr = q_vector->eitr; @@ -1311,35 +1421,19 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter) if (new_itr != q_vector->eitr) { u32 itr_reg; + + /* save the algorithm value here, not the smoothed one */ + q_vector->eitr = new_itr; /* do an exponential smoothing */ new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100); - q_vector->eitr = new_itr; itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr); - /* must write high and low 16 bits to reset counter */ - IXGBE_WRITE_REG(hw, IXGBE_EITR(0), itr_reg | (itr_reg)<<16); + ixgbe_write_eitr(adapter, 0, itr_reg); } return; } /** - * ixgbe_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - **/ -static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) -{ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); - IXGBE_WRITE_FLUSH(&adapter->hw); - if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { - int i; - for (i = 0; i < adapter->num_msix_vectors; i++) - synchronize_irq(adapter->msix_entries[i].vector); - } else { - synchronize_irq(adapter->pdev->irq); - } -} - -/** * ixgbe_irq_enable - Enable default interrupt generation settings * @adapter: board private structure **/ @@ -1349,7 +1443,21 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) mask = IXGBE_EIMS_ENABLE_MASK; if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) mask |= IXGBE_EIMS_GPI_SDP1; + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + mask |= IXGBE_EIMS_ECC; + mask |= IXGBE_EIMS_GPI_SDP1; + mask |= IXGBE_EIMS_GPI_SDP2; + } + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + /* enable the rest of the queue vectors */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1), + (IXGBE_EIMS_RTX_QUEUE << 16)); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(2), + ((IXGBE_EIMS_RTX_QUEUE << 16) | + IXGBE_EIMS_RTX_QUEUE)); + } IXGBE_WRITE_FLUSH(&adapter->hw); } @@ -1365,6 +1473,12 @@ static irqreturn_t ixgbe_intr(int irq, void *data) struct ixgbe_hw *hw = &adapter->hw; u32 eicr; + /* + * Workaround for silicon errata. Mask the interrupts + * before the read of EICR. + */ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); + /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read * therefore no explict interrupt disable is necessary */ eicr = IXGBE_READ_REG(hw, IXGBE_EICR); @@ -1379,15 +1493,18 @@ static irqreturn_t ixgbe_intr(int irq, void *data) if (eicr & IXGBE_EICR_LSC) ixgbe_check_lsc(adapter); + if (hw->mac.type == ixgbe_mac_82599EB) + ixgbe_check_sfp_event(adapter, eicr); + ixgbe_check_fan_failure(adapter, eicr); - if (netif_rx_schedule_prep(&adapter->q_vector[0].napi)) { + if (napi_schedule_prep(&adapter->q_vector[0].napi)) { adapter->tx_ring[0].total_packets = 0; adapter->tx_ring[0].total_bytes = 0; adapter->rx_ring[0].total_packets = 0; adapter->rx_ring[0].total_bytes = 0; /* would disable interrupts here but EIAM disabled it */ - __netif_rx_schedule(&adapter->q_vector[0].napi); + __napi_schedule(&adapter->q_vector[0].napi); } return IRQ_HANDLED; @@ -1459,6 +1576,39 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter) } /** + * ixgbe_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) +{ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(2), ~0); + } + IXGBE_WRITE_FLUSH(&adapter->hw); + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int i; + for (i = 0; i < adapter->num_msix_vectors; i++) + synchronize_irq(adapter->msix_entries[i].vector); + } else { + synchronize_irq(adapter->pdev->irq); + } +} + +static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter) +{ + u32 mask = IXGBE_EIMS_RTX_QUEUE; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1), mask << 16); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(2), + (mask << 16 | mask)); + } + /* skip the flush */ +} + +/** * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts * **/ @@ -1469,8 +1619,8 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_EITR(0), EITR_INTS_PER_SEC_TO_REG(adapter->eitr_param)); - ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(0), 0); - ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(0), 0); + ixgbe_set_ivar(adapter, 0, 0, 0); + ixgbe_set_ivar(adapter, 1, 0, 0); map_vector_to_rxq(adapter, 0, 0); map_vector_to_txq(adapter, 0, 0); @@ -1486,7 +1636,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) **/ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) { - u64 tdba, tdwba; + u64 tdba; struct ixgbe_hw *hw = &adapter->hw; u32 i, j, tdlen, txctrl; @@ -1499,11 +1649,6 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_TDBAL(j), (tdba & DMA_32BIT_MASK)); IXGBE_WRITE_REG(hw, IXGBE_TDBAH(j), (tdba >> 32)); - tdwba = ring->dma + - (ring->count * sizeof(union ixgbe_adv_tx_desc)); - tdwba |= IXGBE_TDWBAL_HEAD_WB_ENABLE; - IXGBE_WRITE_REG(hw, IXGBE_TDWBAL(j), tdwba & DMA_32BIT_MASK); - IXGBE_WRITE_REG(hw, IXGBE_TDWBAH(j), (tdwba >> 32)); IXGBE_WRITE_REG(hw, IXGBE_TDLEN(j), tdlen); IXGBE_WRITE_REG(hw, IXGBE_TDH(j), 0); IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0); @@ -1516,26 +1661,25 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl); } + if (hw->mac.type == ixgbe_mac_82599EB) { + /* We enable 8 traffic classes, DCB only */ + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) + IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA | + IXGBE_MTQC_8TC_8TQ)); + } } -#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 +#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index) { struct ixgbe_ring *rx_ring; u32 srrctl; - int queue0; + int queue0 = 0; unsigned long mask; - /* program one srrctl register per VMDq index */ - if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) { - long shift, len; - mask = (unsigned long) adapter->ring_feature[RING_F_RSS].mask; - len = sizeof(adapter->ring_feature[RING_F_VMDQ].mask) * 8; - shift = find_first_bit(&mask, len); - queue0 = index & mask; - index = (index & mask) >> shift; - /* program one srrctl per RSS queue since RDRXCTL.MVMEN is enabled */ + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + queue0 = index; } else { mask = (unsigned long) adapter->ring_feature[RING_F_RSS].mask; queue0 = index & mask; @@ -1550,7 +1694,14 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index) srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { - srrctl |= IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; + u16 bufsz = IXGBE_RXBUFFER_2048; + /* grow the amount we can receive on large page machines */ + if (bufsz < (PAGE_SIZE / 2)) + bufsz = (PAGE_SIZE / 2); + /* cap the bufsz at our largest descriptor size */ + bufsz = min((u16)IXGBE_MAX_RXBUFFER, bufsz); + + srrctl |= bufsz >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; srrctl |= ((IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & @@ -1565,39 +1716,10 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index) srrctl |= rx_ring->rx_buf_len >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; } - IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl); -} -/** - * ixgbe_get_skb_hdr - helper function for LRO header processing - * @skb: pointer to sk_buff to be added to LRO packet - * @iphdr: pointer to ip header structure - * @tcph: pointer to tcp header structure - * @hdr_flags: pointer to header flags - * @priv: private data - **/ -static int ixgbe_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph, - u64 *hdr_flags, void *priv) -{ - union ixgbe_adv_rx_desc *rx_desc = priv; - - /* Verify that this is a valid IPv4 TCP packet */ - if (!((ixgbe_get_pkt_info(rx_desc) & IXGBE_RXDADV_PKTTYPE_IPV4) && - (ixgbe_get_pkt_info(rx_desc) & IXGBE_RXDADV_PKTTYPE_TCP))) - return -1; - - /* Set network headers */ - skb_reset_network_header(skb); - skb_set_transport_header(skb, ip_hdrlen(skb)); - *iphdr = ip_hdr(skb); - *tcph = tcp_hdr(skb); - *hdr_flags = LRO_IPV4 | LRO_TCP; - return 0; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl); } -#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ - (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) - /** * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset * @adapter: board private structure @@ -1616,8 +1738,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) 0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE, 0x6A3E67EA, 0x14364D17, 0x3BED200D}; u32 fctrl, hlreg0; - u32 pages; - u32 reta = 0, mrqc; + u32 reta = 0, mrqc = 0; u32 rdrxctl; int rx_buf_len; @@ -1627,6 +1748,14 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) /* Set the RX buffer length according to the mode */ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { rx_buf_len = IXGBE_RX_HDR_SIZE; + if (hw->mac.type == ixgbe_mac_82599EB) { + /* PSRTYPE must be initialized in 82599 */ + u32 psrtype = IXGBE_PSRTYPE_TCPHDR | + IXGBE_PSRTYPE_UDPHDR | + IXGBE_PSRTYPE_IPV4HDR | + IXGBE_PSRTYPE_IPV6HDR; + IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype); + } } else { if (netdev->mtu <= ETH_DATA_LEN) rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE; @@ -1637,6 +1766,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL); fctrl |= IXGBE_FCTRL_BAM; fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ + fctrl |= IXGBE_FCTRL_PMCF; IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl); hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); @@ -1646,8 +1776,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) hlreg0 |= IXGBE_HLREG0_JUMBOEN; IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); - pages = PAGE_USE_COUNT(adapter->netdev->mtu); - rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc); /* disable receives while setting up the descriptors */ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); @@ -1666,37 +1794,44 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) adapter->rx_ring[i].head = IXGBE_RDH(j); adapter->rx_ring[i].tail = IXGBE_RDT(j); adapter->rx_ring[i].rx_buf_len = rx_buf_len; - /* Intitial LRO Settings */ - adapter->rx_ring[i].lro_mgr.max_aggr = IXGBE_MAX_LRO_AGGREGATE; - adapter->rx_ring[i].lro_mgr.max_desc = IXGBE_MAX_LRO_DESCRIPTORS; - adapter->rx_ring[i].lro_mgr.get_skb_header = ixgbe_get_skb_hdr; - adapter->rx_ring[i].lro_mgr.features = LRO_F_EXTRACT_VLAN_ID; - if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) - adapter->rx_ring[i].lro_mgr.features |= LRO_F_NAPI; - adapter->rx_ring[i].lro_mgr.dev = adapter->netdev; - adapter->rx_ring[i].lro_mgr.ip_summed = CHECKSUM_UNNECESSARY; - adapter->rx_ring[i].lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY; ixgbe_configure_srrctl(adapter, j); } - /* - * For VMDq support of different descriptor types or - * buffer sizes through the use of multiple SRRCTL - * registers, RDRXCTL.MVMEN must be set to 1 - * - * also, the manual doesn't mention it clearly but DCA hints - * will only use queue 0's tags unless this bit is set. Side - * effects of setting this bit are only that SRRCTL must be - * fully programmed [0..15] - */ - if (adapter->flags & - (IXGBE_FLAG_RSS_ENABLED | IXGBE_FLAG_VMDQ_ENABLED)) { + if (hw->mac.type == ixgbe_mac_82598EB) { + /* + * For VMDq support of different descriptor types or + * buffer sizes through the use of multiple SRRCTL + * registers, RDRXCTL.MVMEN must be set to 1 + * + * also, the manual doesn't mention it clearly but DCA hints + * will only use queue 0's tags unless this bit is set. Side + * effects of setting this bit are only that SRRCTL must be + * fully programmed [0..15] + */ rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); rdrxctl |= IXGBE_RDRXCTL_MVMEN; IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); } + /* Program MRQC for the distribution of queues */ + if (hw->mac.type == ixgbe_mac_82599EB) { + int mask = adapter->flags & ( + IXGBE_FLAG_RSS_ENABLED + | IXGBE_FLAG_DCB_ENABLED + ); + + switch (mask) { + case (IXGBE_FLAG_RSS_ENABLED): + mrqc = IXGBE_MRQC_RSSEN; + break; + case (IXGBE_FLAG_DCB_ENABLED): + mrqc = IXGBE_MRQC_RT8TCEN; + break; + default: + break; + } + } if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { /* Fill out redirection table */ for (i = 0, j = 0; i < 128; i++, j++) { @@ -1713,19 +1848,17 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) for (i = 0; i < 10; i++) IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), seed[i]); - mrqc = IXGBE_MRQC_RSSEN + if (hw->mac.type == ixgbe_mac_82598EB) + mrqc |= IXGBE_MRQC_RSSEN; /* Perform hash on these packet types */ - | IXGBE_MRQC_RSS_FIELD_IPV4 - | IXGBE_MRQC_RSS_FIELD_IPV4_TCP - | IXGBE_MRQC_RSS_FIELD_IPV4_UDP - | IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP - | IXGBE_MRQC_RSS_FIELD_IPV6_EX - | IXGBE_MRQC_RSS_FIELD_IPV6 - | IXGBE_MRQC_RSS_FIELD_IPV6_TCP - | IXGBE_MRQC_RSS_FIELD_IPV6_UDP - | IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP; - IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); + mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4 + | IXGBE_MRQC_RSS_FIELD_IPV4_TCP + | IXGBE_MRQC_RSS_FIELD_IPV4_UDP + | IXGBE_MRQC_RSS_FIELD_IPV6 + | IXGBE_MRQC_RSS_FIELD_IPV6_TCP + | IXGBE_MRQC_RSS_FIELD_IPV6_UDP; } + IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); @@ -1742,6 +1875,12 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) } IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); + + if (hw->mac.type == ixgbe_mac_82599EB) { + rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP; + IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); + } } static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) @@ -1775,6 +1914,7 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); u32 ctrl; + int i, j; if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_disable(adapter); @@ -1786,18 +1926,24 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, * not in DCB mode. */ ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL); - ctrl |= IXGBE_VLNCTRL_VME; - ctrl &= ~IXGBE_VLNCTRL_CFIEN; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); - ixgbe_vlan_rx_add_vid(netdev, 0); - - if (grp) { + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + ctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE; + ctrl &= ~IXGBE_VLNCTRL_CFIEN; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + ctrl |= IXGBE_VLNCTRL_VFE; /* enable VLAN tag insert/strip */ ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL); - ctrl |= IXGBE_VLNCTRL_VME; ctrl &= ~IXGBE_VLNCTRL_CFIEN; IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); + for (i = 0; i < adapter->num_rx_queues; i++) { + j = adapter->rx_ring[i].reg_idx; + ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(j)); + ctrl |= IXGBE_RXDCTL_VME; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(j), ctrl); + } } + ixgbe_vlan_rx_add_vid(netdev, 0); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable(adapter); @@ -1960,9 +2106,21 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) } /* Enable VLAN tag insert/strip */ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - vlnctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE; - vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + if (hw->mac.type == ixgbe_mac_82598EB) { + vlnctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE; + vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + } else if (hw->mac.type == ixgbe_mac_82599EB) { + vlnctrl |= IXGBE_VLNCTRL_VFE; + vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + for (i = 0; i < adapter->num_rx_queues; i++) { + j = adapter->rx_ring[i].reg_idx; + vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); + vlnctrl |= IXGBE_RXDCTL_VME; + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); + } + } hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true); } @@ -1993,13 +2151,115 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) (adapter->rx_ring[i].count - 1)); } +static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) +{ + switch (hw->phy.type) { + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + case ixgbe_phy_tw_tyco: + case ixgbe_phy_tw_unknown: + return true; + default: + return false; + } +} + +/** + * ixgbe_sfp_link_config - set up SFP+ link + * @adapter: pointer to private adapter struct + **/ +static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + + if (hw->phy.multispeed_fiber) { + /* + * In multispeed fiber setups, the device may not have + * had a physical connection when the driver loaded. + * If that's the case, the initial link configuration + * couldn't get the MAC into 10G or 1G mode, so we'll + * never have a link status change interrupt fire. + * We need to try and force an autonegotiation + * session, then bring up link. + */ + hw->mac.ops.setup_sfp(hw); + if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) + schedule_work(&adapter->multispeed_fiber_task); + } else { + /* + * Direct Attach Cu and non-multispeed fiber modules + * still need to be configured properly prior to + * attempting link. + */ + if (!(adapter->flags & IXGBE_FLAG_IN_SFP_MOD_TASK)) + schedule_work(&adapter->sfp_config_module_task); + } +} + +/** + * ixgbe_non_sfp_link_config - set up non-SFP+ link + * @hw: pointer to private hardware struct + * + * Returns 0 on success, negative on failure + **/ +static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) +{ + u32 autoneg; + bool link_up = false; + u32 ret = IXGBE_ERR_LINK_SETUP; + + if (hw->mac.ops.check_link) + ret = hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + + if (ret) + goto link_cfg_out; + + if (hw->mac.ops.get_link_capabilities) + ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, + &hw->mac.autoneg); + if (ret) + goto link_cfg_out; + + if (hw->mac.ops.setup_link_speed) + ret = hw->mac.ops.setup_link_speed(hw, autoneg, true, link_up); +link_cfg_out: + return ret; +} + +#define IXGBE_MAX_RX_DESC_POLL 10 +static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter, + int rxr) +{ + int j = adapter->rx_ring[rxr].reg_idx; + int k; + + for (k = 0; k < IXGBE_MAX_RX_DESC_POLL; k++) { + if (IXGBE_READ_REG(&adapter->hw, + IXGBE_RXDCTL(j)) & IXGBE_RXDCTL_ENABLE) + break; + else + msleep(1); + } + if (k >= IXGBE_MAX_RX_DESC_POLL) { + DPRINTK(DRV, ERR, "RXDCTL.ENABLE on Rx queue %d " + "not set within the polling period\n", rxr); + } + ixgbe_release_rx_desc(&adapter->hw, &adapter->rx_ring[rxr], + (adapter->rx_ring[rxr].count - 1)); +} + static int ixgbe_up_complete(struct ixgbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; struct ixgbe_hw *hw = &adapter->hw; int i, j = 0; + int num_rx_rings = adapter->num_rx_queues; + int err; int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; u32 txdctl, rxdctl, mhadd; + u32 dmatxctl; u32 gpie; ixgbe_get_hw_control(adapter); @@ -2031,6 +2291,13 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); } + if (hw->mac.type == ixgbe_mac_82599EB) { + gpie = IXGBE_READ_REG(hw, IXGBE_GPIE); + gpie |= IXGBE_SDP1_GPIEN; + gpie |= IXGBE_SDP2_GPIEN; + IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); + } + mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { mhadd &= ~IXGBE_MHADD_MFS_MASK; @@ -2044,11 +2311,23 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j)); /* enable WTHRESH=8 descriptors, to encourage burst writeback */ txdctl |= (8 << 16); + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl); + } + + if (hw->mac.type == ixgbe_mac_82599EB) { + /* DMATXCTL.EN must be set after all Tx queue config is done */ + dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); + dmatxctl |= IXGBE_DMATXCTL_TE; + IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl); + } + for (i = 0; i < adapter->num_tx_queues; i++) { + j = adapter->tx_ring[i].reg_idx; + txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j)); txdctl |= IXGBE_TXDCTL_ENABLE; IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl); } - for (i = 0; i < adapter->num_rx_queues; i++) { + for (i = 0; i < num_rx_rings; i++) { j = adapter->rx_ring[i].reg_idx; rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); /* enable PTHRESH=32 descriptors (half the internal cache) @@ -2057,19 +2336,22 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) rxdctl |= 0x0020; rxdctl |= IXGBE_RXDCTL_ENABLE; IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), rxdctl); + if (hw->mac.type == ixgbe_mac_82599EB) + ixgbe_rx_desc_queue_enable(adapter, i); } /* enable all receives */ rxdctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); - rxdctl |= (IXGBE_RXCTRL_DMBYPS | IXGBE_RXCTRL_RXEN); - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxdctl); + if (hw->mac.type == ixgbe_mac_82598EB) + rxdctl |= (IXGBE_RXCTRL_DMBYPS | IXGBE_RXCTRL_RXEN); + else + rxdctl |= IXGBE_RXCTRL_RXEN; + hw->mac.ops.enable_rx_dma(hw, rxdctl); if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) ixgbe_configure_msix(adapter); else ixgbe_configure_msi_and_legacy(adapter); - ixgbe_napi_add_all(adapter); - clear_bit(__IXGBE_DOWN, &adapter->state); ixgbe_napi_enable_all(adapter); @@ -2078,6 +2360,28 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) ixgbe_irq_enable(adapter); + /* + * For hot-pluggable SFP+ devices, a new SFP+ module may have + * arrived before interrupts were enabled. We need to kick off + * the SFP+ module setup first, then try to bring up link. + * If we're not hot-pluggable SFP+, we just need to configure link + * and bring it up. + */ + err = hw->phy.ops.identify(hw); + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err); + ixgbe_down(adapter); + return err; + } + + if (ixgbe_is_sfp(hw)) { + ixgbe_sfp_link_config(adapter); + } else { + err = ixgbe_non_sfp_link_config(hw); + if (err) + DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err); + } + /* enable transmits */ netif_tx_start_all_queues(netdev); @@ -2104,6 +2408,8 @@ int ixgbe_up(struct ixgbe_adapter *adapter) /* hardware has been reset, we need to reload some things */ ixgbe_configure(adapter); + ixgbe_napi_add_all(adapter); + return ixgbe_up_complete(adapter); } @@ -2165,8 +2471,10 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter, rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; - writel(0, adapter->hw.hw_addr + rx_ring->head); - writel(0, adapter->hw.hw_addr + rx_ring->tail); + if (rx_ring->head) + writel(0, adapter->hw.hw_addr + rx_ring->head); + if (rx_ring->tail) + writel(0, adapter->hw.hw_addr + rx_ring->tail); } /** @@ -2197,8 +2505,10 @@ static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter, tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; - writel(0, adapter->hw.hw_addr + tx_ring->head); - writel(0, adapter->hw.hw_addr + tx_ring->tail); + if (tx_ring->head) + writel(0, adapter->hw.hw_addr + tx_ring->head); + if (tx_ring->tail) + writel(0, adapter->hw.hw_addr + tx_ring->tail); } /** @@ -2261,6 +2571,11 @@ void ixgbe_down(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), (txdctl & ~IXGBE_TXDCTL_ENABLE)); } + /* Disable the Tx DMA engine on 82599 */ + if (hw->mac.type == ixgbe_mac_82599EB) + IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, + (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) & + ~IXGBE_DMATXCTL_TE)); netif_carrier_off(netdev); @@ -2297,10 +2612,10 @@ void ixgbe_down(struct ixgbe_adapter *adapter) **/ static int ixgbe_poll(struct napi_struct *napi, int budget) { - struct ixgbe_q_vector *q_vector = container_of(napi, - struct ixgbe_q_vector, napi); + struct ixgbe_q_vector *q_vector = + container_of(napi, struct ixgbe_q_vector, napi); struct ixgbe_adapter *adapter = q_vector->adapter; - int tx_cleaned, work_done = 0; + int tx_clean_complete, work_done = 0; #ifdef CONFIG_IXGBE_DCA if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { @@ -2309,19 +2624,19 @@ static int ixgbe_poll(struct napi_struct *napi, int budget) } #endif - tx_cleaned = ixgbe_clean_tx_irq(adapter, adapter->tx_ring); - ixgbe_clean_rx_irq(adapter, adapter->rx_ring, &work_done, budget); + tx_clean_complete = ixgbe_clean_tx_irq(adapter, adapter->tx_ring); + ixgbe_clean_rx_irq(q_vector, adapter->rx_ring, &work_done, budget); - if (tx_cleaned) + if (!tx_clean_complete) work_done = budget; /* If budget not fully consumed, exit the polling mode */ if (work_done < budget) { - netif_rx_complete(napi); - if (adapter->itr_setting & 3) + napi_complete(napi); + if (adapter->itr_setting & 1) ixgbe_set_itr(adapter); if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_enable(adapter); + ixgbe_irq_enable_queues(adapter); } return work_done; } @@ -2353,68 +2668,76 @@ static void ixgbe_reset_task(struct work_struct *work) ixgbe_reinit_locked(adapter); } -static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) +#ifdef CONFIG_IXGBE_DCB +static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter) { - int nrq = 1, ntq = 1; - int feature_mask = 0, rss_i, rss_m; - int dcb_i, dcb_m; + bool ret = false; - /* Number of supported queues */ - switch (adapter->hw.mac.type) { - case ixgbe_mac_82598EB: - dcb_i = adapter->ring_feature[RING_F_DCB].indices; - dcb_m = 0; - rss_i = adapter->ring_feature[RING_F_RSS].indices; - rss_m = 0; - feature_mask |= IXGBE_FLAG_RSS_ENABLED; - feature_mask |= IXGBE_FLAG_DCB_ENABLED; - - switch (adapter->flags & feature_mask) { - case (IXGBE_FLAG_RSS_ENABLED | IXGBE_FLAG_DCB_ENABLED): - dcb_m = 0x7 << 3; - rss_i = min(8, rss_i); - rss_m = 0x7; - nrq = dcb_i * rss_i; - ntq = min(MAX_TX_QUEUES, dcb_i * rss_i); - break; - case (IXGBE_FLAG_DCB_ENABLED): - dcb_m = 0x7 << 3; - nrq = dcb_i; - ntq = dcb_i; - break; - case (IXGBE_FLAG_RSS_ENABLED): - rss_m = 0xF; - nrq = rss_i; - ntq = rss_i; - break; - case 0: - default: - dcb_i = 0; - dcb_m = 0; - rss_i = 0; - rss_m = 0; - nrq = 1; - ntq = 1; - break; - } + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + adapter->ring_feature[RING_F_DCB].mask = 0x7 << 3; + adapter->num_rx_queues = + adapter->ring_feature[RING_F_DCB].indices; + adapter->num_tx_queues = + adapter->ring_feature[RING_F_DCB].indices; + ret = true; + } else { + ret = false; + } - /* Sanity check, we should never have zero queues */ - nrq = (nrq ?:1); - ntq = (ntq ?:1); + return ret; +} +#endif - adapter->ring_feature[RING_F_DCB].indices = dcb_i; - adapter->ring_feature[RING_F_DCB].mask = dcb_m; - adapter->ring_feature[RING_F_RSS].indices = rss_i; - adapter->ring_feature[RING_F_RSS].mask = rss_m; - break; - default: - nrq = 1; - ntq = 1; - break; +/** + * ixgbe_set_rss_queues: Allocate queues for RSS + * @adapter: board private structure to initialize + * + * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try + * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU. + * + **/ +static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) +{ + bool ret = false; + + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { + adapter->ring_feature[RING_F_RSS].mask = 0xF; + adapter->num_rx_queues = + adapter->ring_feature[RING_F_RSS].indices; + adapter->num_tx_queues = + adapter->ring_feature[RING_F_RSS].indices; + ret = true; + } else { + ret = false; } - adapter->num_rx_queues = nrq; - adapter->num_tx_queues = ntq; + return ret; +} + +/* + * ixgbe_set_num_queues: Allocate queues for device, feature dependant + * @adapter: board private structure to initialize + * + * This is the top level queue allocation routine. The order here is very + * important, starting with the "most" number of features turned on at once, + * and ending with the smallest set of features. This way large combinations + * can be allocated if they're turned on, and smaller combinations are the + * fallthrough conditions. + * + **/ +static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) +{ + /* Start with base case */ + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + +#ifdef CONFIG_IXGBE_DCB + if (ixgbe_set_dcb_queues(adapter)) + return; + +#endif + if (ixgbe_set_rss_queues(adapter)) + return; } static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, @@ -2460,71 +2783,104 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, ixgbe_set_num_queues(adapter); } else { adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */ - adapter->num_msix_vectors = vectors; + /* + * Adjust for only the vectors we'll use, which is minimum + * of max_msix_q_vectors + NON_Q_VECTORS, or the number of + * vectors we were allocated. + */ + adapter->num_msix_vectors = min(vectors, + adapter->max_msix_q_vectors + NON_Q_VECTORS); } } /** - * ixgbe_cache_ring_register - Descriptor ring to register mapping + * ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS * @adapter: board private structure to initialize * - * Once we know the feature-set enabled for the device, we'll cache - * the register offset the descriptor ring is assigned to. + * Cache the descriptor ring offsets for RSS to the assigned rings. + * **/ -static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) +static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter) { - int feature_mask = 0, rss_i; - int i, txr_idx, rxr_idx; - int dcb_i; + int i; + bool ret = false; - /* Number of supported queues */ - switch (adapter->hw.mac.type) { - case ixgbe_mac_82598EB: - dcb_i = adapter->ring_feature[RING_F_DCB].indices; - rss_i = adapter->ring_feature[RING_F_RSS].indices; - txr_idx = 0; - rxr_idx = 0; - feature_mask |= IXGBE_FLAG_DCB_ENABLED; - feature_mask |= IXGBE_FLAG_RSS_ENABLED; - switch (adapter->flags & feature_mask) { - case (IXGBE_FLAG_RSS_ENABLED | IXGBE_FLAG_DCB_ENABLED): - for (i = 0; i < dcb_i; i++) { - int j; - /* Rx first */ - for (j = 0; j < adapter->num_rx_queues; j++) { - adapter->rx_ring[rxr_idx].reg_idx = - i << 3 | j; - rxr_idx++; - } - /* Tx now */ - for (j = 0; j < adapter->num_tx_queues; j++) { - adapter->tx_ring[txr_idx].reg_idx = - i << 2 | (j >> 1); - if (j & 1) - txr_idx++; - } - } - case (IXGBE_FLAG_DCB_ENABLED): + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].reg_idx = i; + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].reg_idx = i; + ret = true; + } else { + ret = false; + } + + return ret; +} + +#ifdef CONFIG_IXGBE_DCB +/** + * ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB + * @adapter: board private structure to initialize + * + * Cache the descriptor ring offsets for DCB to the assigned rings. + * + **/ +static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter) +{ + int i; + bool ret = false; + int dcb_i = adapter->ring_feature[RING_F_DCB].indices; + + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { /* the number of queues is assumed to be symmetric */ for (i = 0; i < dcb_i; i++) { adapter->rx_ring[i].reg_idx = i << 3; adapter->tx_ring[i].reg_idx = i << 2; } - break; - case (IXGBE_FLAG_RSS_ENABLED): - for (i = 0; i < adapter->num_rx_queues; i++) - adapter->rx_ring[i].reg_idx = i; - for (i = 0; i < adapter->num_tx_queues; i++) - adapter->tx_ring[i].reg_idx = i; - break; - case 0: - default: - break; + ret = true; + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + for (i = 0; i < dcb_i; i++) { + adapter->rx_ring[i].reg_idx = i << 4; + adapter->tx_ring[i].reg_idx = i << 4; + } + ret = true; + } else { + ret = false; } - break; - default: - break; + } else { + ret = false; } + + return ret; +} +#endif + +/** + * ixgbe_cache_ring_register - Descriptor ring to register mapping + * @adapter: board private structure to initialize + * + * Once we know the feature-set enabled for the device, we'll cache + * the register offset the descriptor ring is assigned to. + * + * Note, the order the various feature calls is important. It must start with + * the "most" features enabled at the same time, then trickle down to the + * least amount of features turned on at once. + **/ +static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) +{ + /* start with default case */ + adapter->rx_ring[0].reg_idx = 0; + adapter->tx_ring[0].reg_idx = 0; + +#ifdef CONFIG_IXGBE_DCB + if (ixgbe_cache_ring_dcb(adapter)) + return; + +#endif + if (ixgbe_cache_ring_rss(adapter)) + return; } /** @@ -2532,7 +2888,8 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) * @adapter: board private structure to initialize * * We allocate one ring per queue at run-time since we don't know the - * number of queues at compile-time. + * number of queues at compile-time. The polling_netdev array is + * intended for Multiqueue, but should work fine with a single queue. **/ static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter) { @@ -2711,7 +3068,8 @@ static void ixgbe_sfp_timer(unsigned long data) { struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; - /* Do the sfp_timer outside of interrupt context due to the + /* + * Do the sfp_timer outside of interrupt context due to the * delays that sfp+ detection requires */ schedule_work(&adapter->sfp_task); @@ -2785,6 +3143,10 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->ring_feature[RING_F_RSS].indices = rss; adapter->flags |= IXGBE_FLAG_RSS_ENABLED; adapter->ring_feature[RING_F_DCB].indices = IXGBE_MAX_DCB_INDICES; + if (hw->mac.type == ixgbe_mac_82598EB) + adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598; + else if (hw->mac.type == ixgbe_mac_82599EB) + adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599; #ifdef CONFIG_IXGBE_DCB /* Configure DCB traffic classes */ @@ -2805,21 +3167,14 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->ring_feature[RING_F_DCB].indices); #endif - if (hw->mac.ops.get_media_type && - (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)) - adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; /* default flow control settings */ - hw->fc.original_type = ixgbe_fc_none; - hw->fc.type = ixgbe_fc_none; + hw->fc.requested_mode = ixgbe_fc_none; hw->fc.high_water = IXGBE_DEFAULT_FCRTH; hw->fc.low_water = IXGBE_DEFAULT_FCRTL; hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; hw->fc.send_xon = true; - /* select 10G link by default */ - hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN; - /* enable itr by default in dynamic mode */ adapter->itr_setting = 1; adapter->eitr_param = 20000; @@ -2866,8 +3221,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter, memset(tx_ring->tx_buffer_info, 0, size); /* round up to nearest 4K */ - tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc) + - sizeof(u32); + tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc); tx_ring->size = ALIGN(tx_ring->size, 4096); tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size, @@ -2926,12 +3280,6 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, struct pci_dev *pdev = adapter->pdev; int size; - size = sizeof(struct net_lro_desc) * IXGBE_MAX_LRO_DESCRIPTORS; - rx_ring->lro_mgr.lro_arr = vmalloc(size); - if (!rx_ring->lro_mgr.lro_arr) - return -ENOMEM; - memset(rx_ring->lro_mgr.lro_arr, 0, size); - size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; rx_ring->rx_buffer_info = vmalloc(size); if (!rx_ring->rx_buffer_info) { @@ -2960,8 +3308,6 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, return 0; alloc_failed: - vfree(rx_ring->lro_mgr.lro_arr); - rx_ring->lro_mgr.lro_arr = NULL; return -ENOMEM; } @@ -3024,7 +3370,8 @@ static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) int i; for (i = 0; i < adapter->num_tx_queues; i++) - ixgbe_free_tx_resources(adapter, &adapter->tx_ring[i]); + if (adapter->tx_ring[i].desc) + ixgbe_free_tx_resources(adapter, &adapter->tx_ring[i]); } /** @@ -3039,9 +3386,6 @@ void ixgbe_free_rx_resources(struct ixgbe_adapter *adapter, { struct pci_dev *pdev = adapter->pdev; - vfree(rx_ring->lro_mgr.lro_arr); - rx_ring->lro_mgr.lro_arr = NULL; - ixgbe_clean_rx_ring(adapter, rx_ring); vfree(rx_ring->rx_buffer_info); @@ -3063,7 +3407,8 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) int i; for (i = 0; i < adapter->num_rx_queues; i++) - ixgbe_free_rx_resources(adapter, &adapter->rx_ring[i]); + if (adapter->rx_ring[i].desc) + ixgbe_free_rx_resources(adapter, &adapter->rx_ring[i]); } /** @@ -3126,6 +3471,8 @@ static int ixgbe_open(struct net_device *netdev) ixgbe_configure(adapter); + ixgbe_napi_add_all(adapter); + err = ixgbe_request_irq(adapter); if (err) goto err_req_irq; @@ -3180,6 +3527,7 @@ static int ixgbe_close(struct net_device *netdev) /** * ixgbe_napi_add_all - prep napi structs for use * @adapter: private struct + * * helper function to napi_add each possible q_vector->napi */ void ixgbe_napi_add_all(struct ixgbe_adapter *adapter) @@ -3252,7 +3600,6 @@ static int ixgbe_resume(struct pci_dev *pdev) return err; } - ixgbe_napi_add_all(adapter); ixgbe_reset(adapter); if (netif_running(netdev)) { @@ -3271,6 +3618,9 @@ static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 ctrl, fctrl; + u32 wufc = adapter->wol; #ifdef CONFIG_PM int retval = 0; #endif @@ -3293,10 +3643,35 @@ static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) retval = pci_save_state(pdev); if (retval) return retval; + #endif + if (wufc) { + ixgbe_set_rx_mode(netdev); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); + /* turn on all-multi mode if wake on multicast is enabled */ + if (wufc & IXGBE_WUFC_MC) { + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl |= IXGBE_FCTRL_MPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + ctrl |= IXGBE_CTRL_GIO_DIS; + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + + IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc); + } else { + IXGBE_WRITE_REG(hw, IXGBE_WUC, 0); + IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0); + } + + if (wufc && hw->mac.type == ixgbe_mac_82599EB) { + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_enable_wake(pdev, PCI_D3cold, 1); + } else { + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + } ixgbe_release_hw_control(adapter); @@ -3322,6 +3697,12 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) u64 total_mpc = 0; u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; + if (hw->mac.type == ixgbe_mac_82599EB) { + for (i = 0; i < 16; i++) + adapter->hw_rx_no_dma_resources += + IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); + } + adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); for (i = 0; i < 8; i++) { /* for packet buffers not used, the register should read 0 */ @@ -3329,32 +3710,55 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) missed_rx += mpc; adapter->stats.mpc[i] += mpc; total_mpc += adapter->stats.mpc[i]; - adapter->stats.rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); + if (hw->mac.type == ixgbe_mac_82598EB) + adapter->stats.rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); adapter->stats.qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i)); adapter->stats.qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i)); adapter->stats.qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i)); adapter->stats.qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i)); - adapter->stats.pxonrxc[i] += IXGBE_READ_REG(hw, - IXGBE_PXONRXC(i)); + if (hw->mac.type == ixgbe_mac_82599EB) { + adapter->stats.pxonrxc[i] += IXGBE_READ_REG(hw, + IXGBE_PXONRXCNT(i)); + adapter->stats.pxoffrxc[i] += IXGBE_READ_REG(hw, + IXGBE_PXOFFRXCNT(i)); + adapter->stats.qprdc[i] += IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); + } else { + adapter->stats.pxonrxc[i] += IXGBE_READ_REG(hw, + IXGBE_PXONRXC(i)); + adapter->stats.pxoffrxc[i] += IXGBE_READ_REG(hw, + IXGBE_PXOFFRXC(i)); + } adapter->stats.pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); - adapter->stats.pxoffrxc[i] += IXGBE_READ_REG(hw, - IXGBE_PXOFFRXC(i)); adapter->stats.pxofftxc[i] += IXGBE_READ_REG(hw, - IXGBE_PXOFFTXC(i)); + IXGBE_PXOFFTXC(i)); } adapter->stats.gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); /* work around hardware counting issue */ adapter->stats.gprc -= missed_rx; /* 82598 hardware only has a 32 bit counter in the high register */ - adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); - adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); - adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORH); + if (hw->mac.type == ixgbe_mac_82599EB) { + adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); + IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ + adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); + IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ + adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL); + IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ + adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); + adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); + } else { + adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); + adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); + adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); + adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); + adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORH); + } bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); adapter->stats.bprc += bprc; adapter->stats.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); - adapter->stats.mprc -= bprc; + if (hw->mac.type == ixgbe_mac_82598EB) + adapter->stats.mprc -= bprc; adapter->stats.roc += IXGBE_READ_REG(hw, IXGBE_ROC); adapter->stats.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); adapter->stats.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); @@ -3363,8 +3767,6 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) adapter->stats.prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); adapter->stats.prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); adapter->stats.rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); - adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); - adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC); adapter->stats.lxontxc += lxon; lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); @@ -3416,17 +3818,54 @@ static void ixgbe_watchdog(unsigned long data) /* Do the watchdog outside of interrupt context due to the lovely * delays that some of the newer hardware requires */ if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + u64 eics = 0; + int i; + + for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) + eics |= (1 << i); + /* Cause software interrupt to ensure rx rings are cleaned */ - if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { - u32 eics = - (1 << (adapter->num_msix_vectors - NON_Q_VECTORS)) - 1; - IXGBE_WRITE_REG(hw, IXGBE_EICS, eics); - } else { - /* For legacy and MSI interrupts don't set any bits that - * are enabled for EIAM, because this operation would - * set *both* EIMS and EICS for any bit in EIAM */ - IXGBE_WRITE_REG(hw, IXGBE_EICS, - (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + IXGBE_WRITE_REG(hw, IXGBE_EICS, (u32)eics); + } else { + /* + * for legacy and MSI interrupts don't set any + * bits that are enabled for EIAM, because this + * operation would set *both* EIMS and EICS for + * any bit in EIAM + */ + IXGBE_WRITE_REG(hw, IXGBE_EICS, + (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); + } + break; + case ixgbe_mac_82599EB: + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + /* + * EICS(0..15) first 0-15 q vectors + * EICS[1] (16..31) q vectors 16-31 + * EICS[2] (0..31) q vectors 32-63 + */ + IXGBE_WRITE_REG(hw, IXGBE_EICS, + (u32)(eics & 0xFFFF)); + IXGBE_WRITE_REG(hw, IXGBE_EICS_EX(1), + (u32)(eics & 0xFFFF0000)); + IXGBE_WRITE_REG(hw, IXGBE_EICS_EX(2), + (u32)(eics >> 32)); + } else { + /* + * for legacy and MSI interrupts don't set any + * bits that are enabled for EIAM, because this + * operation would set *both* EIMS and EICS for + * any bit in EIAM + */ + IXGBE_WRITE_REG(hw, IXGBE_EICS, + (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); + } + break; + default: + break; } /* Reset the timer */ mod_timer(&adapter->watchdog_timer, @@ -3437,6 +3876,55 @@ static void ixgbe_watchdog(unsigned long data) } /** + * ixgbe_multispeed_fiber_task - worker thread to configure multispeed fiber + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_multispeed_fiber_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, + struct ixgbe_adapter, + multispeed_fiber_task); + struct ixgbe_hw *hw = &adapter->hw; + u32 autoneg; + + adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK; + if (hw->mac.ops.get_link_capabilities) + hw->mac.ops.get_link_capabilities(hw, &autoneg, + &hw->mac.autoneg); + if (hw->mac.ops.setup_link_speed) + hw->mac.ops.setup_link_speed(hw, autoneg, true, true); + adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; + adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK; +} + +/** + * ixgbe_sfp_config_module_task - worker thread to configure a new SFP+ module + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_sfp_config_module_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, + struct ixgbe_adapter, + sfp_config_module_task); + struct ixgbe_hw *hw = &adapter->hw; + u32 err; + + adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK; + err = hw->phy.ops.identify_sfp(hw); + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err); + ixgbe_down(adapter); + return; + } + hw->mac.ops.setup_sfp(hw); + + if (!adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK) + /* This will also work for DA Twinax connections */ + schedule_work(&adapter->multispeed_fiber_task); + adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK; +} + +/** * ixgbe_watchdog_task - worker thread to bring link up * @work: pointer to work_struct containing our data **/ @@ -3466,10 +3954,20 @@ static void ixgbe_watchdog_task(struct work_struct *work) if (link_up) { if (!netif_carrier_ok(netdev)) { - u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS); -#define FLOW_RX (frctl & IXGBE_FCTRL_RFCE) -#define FLOW_TX (rmcs & IXGBE_RMCS_TFCE_802_3X) + bool flow_rx, flow_tx; + + if (hw->mac.type == ixgbe_mac_82599EB) { + u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); + u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG); + flow_rx = (mflcn & IXGBE_MFLCN_RFCE); + flow_tx = (fccfg & IXGBE_FCCFG_TFCE_802_3X); + } else { + u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS); + flow_rx = (frctl & IXGBE_FCTRL_RFCE); + flow_tx = (rmcs & IXGBE_RMCS_TFCE_802_3X); + } + printk(KERN_INFO "ixgbe: %s NIC Link is Up %s, " "Flow Control: %s\n", netdev->name, @@ -3477,9 +3975,9 @@ static void ixgbe_watchdog_task(struct work_struct *work) "10 Gbps" : (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? "1 Gbps" : "unknown speed")), - ((FLOW_RX && FLOW_TX) ? "RX/TX" : - (FLOW_RX ? "RX" : - (FLOW_TX ? "TX" : "None")))); + ((flow_rx && flow_tx) ? "RX/TX" : + (flow_rx ? "RX" : + (flow_tx ? "TX" : "None")))); netif_carrier_on(netdev); } else { @@ -3619,13 +4117,13 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter, if (skb->ip_summed == CHECKSUM_PARTIAL) { switch (skb->protocol) { - case __constant_htons(ETH_P_IP): + case cpu_to_be16(ETH_P_IP): type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4; if (ip_hdr(skb)->protocol == IPPROTO_TCP) type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP; break; - case __constant_htons(ETH_P_IPV6): + case cpu_to_be16(ETH_P_IPV6): /* XXX what about other V6 headers?? */ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) type_tucmd_mlhl |= @@ -3823,6 +4321,16 @@ static int ixgbe_maybe_stop_tx(struct net_device *netdev, return __ixgbe_maybe_stop_tx(netdev, tx_ring, size); } +static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) + return 0; /* All traffic should default to class 0 */ + + return skb_tx_hash(dev, skb); +} + static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -3948,30 +4456,11 @@ static void ixgbe_netpoll(struct net_device *netdev) } #endif -/** - * ixgbe_link_config - set up initial link with default speed and duplex - * @hw: pointer to private hardware struct - * - * Returns 0 on success, negative on failure - **/ -static int ixgbe_link_config(struct ixgbe_hw *hw) -{ - u32 autoneg = IXGBE_LINK_SPEED_10GB_FULL; - - /* must always autoneg for both 1G and 10G link */ - hw->mac.autoneg = true; - - if ((hw->mac.type == ixgbe_mac_82598EB) && - (hw->phy.media_type == ixgbe_media_type_copper)) - autoneg = IXGBE_LINK_SPEED_82598_AUTONEG; - - return hw->mac.ops.setup_link_speed(hw, autoneg, true, true); -} - static const struct net_device_ops ixgbe_netdev_ops = { .ndo_open = ixgbe_open, .ndo_stop = ixgbe_close, .ndo_start_xmit = ixgbe_xmit_frame, + .ndo_select_queue = ixgbe_select_queue, .ndo_get_stats = ixgbe_get_stats, .ndo_set_rx_mode = ixgbe_set_rx_mode, .ndo_set_multicast_list = ixgbe_set_rx_mode, @@ -4007,7 +4496,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; static int cards_found; int i, err, pci_using_dac; - u16 link_status, link_speed, link_width; + u16 pm_value = 0; u32 part_num, eec; err = pci_enable_device(pdev); @@ -4106,6 +4595,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, INIT_WORK(&adapter->sfp_task, ixgbe_sfp_task); + /* multispeed fiber has its own tasklet, called from GPI SDP1 context */ + INIT_WORK(&adapter->multispeed_fiber_task, ixgbe_multispeed_fiber_task); + + /* a new SFP+ module arrival, called from GPI SDP2 context */ + INIT_WORK(&adapter->sfp_config_module_task, + ixgbe_sfp_config_module_task); + err = ii->get_invariants(hw); if (err == IXGBE_ERR_SFP_NOT_PRESENT) { /* start a kernel thread to watch for a module to arrive */ @@ -4142,7 +4638,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netdev->features |= NETIF_F_IPV6_CSUM; netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; - netdev->features |= NETIF_F_LRO; + netdev->features |= NETIF_F_GRO; netdev->vlan_features |= NETIF_F_TSO; netdev->vlan_features |= NETIF_F_TSO6; @@ -4186,26 +4682,41 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (err) goto err_sw_init; + switch (pdev->device) { + case IXGBE_DEV_ID_82599_KX4: +#define IXGBE_PCIE_PMCSR 0x44 + adapter->wol = IXGBE_WUFC_MAG; + pci_read_config_word(pdev, IXGBE_PCIE_PMCSR, &pm_value); + pci_write_config_word(pdev, IXGBE_PCIE_PMCSR, + (pm_value | (1 << 8))); + break; + default: + adapter->wol = 0; + break; + } + device_init_wakeup(&adapter->pdev->dev, true); + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + /* print bus type/speed/width info */ - pci_read_config_word(pdev, IXGBE_PCI_LINK_STATUS, &link_status); - link_speed = link_status & IXGBE_PCI_LINK_SPEED; - link_width = link_status & IXGBE_PCI_LINK_WIDTH; dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n", - ((link_speed == IXGBE_PCI_LINK_SPEED_5000) ? "5.0Gb/s" : - (link_speed == IXGBE_PCI_LINK_SPEED_2500) ? "2.5Gb/s" : - "Unknown"), - ((link_width == IXGBE_PCI_LINK_WIDTH_8) ? "Width x8" : - (link_width == IXGBE_PCI_LINK_WIDTH_4) ? "Width x4" : - (link_width == IXGBE_PCI_LINK_WIDTH_2) ? "Width x2" : - (link_width == IXGBE_PCI_LINK_WIDTH_1) ? "Width x1" : + ((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s": + (hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5Gb/s":"Unknown"), + ((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" : + (hw->bus.width == ixgbe_bus_width_pcie_x4) ? "Width x4" : + (hw->bus.width == ixgbe_bus_width_pcie_x1) ? "Width x1" : "Unknown"), netdev->dev_addr); ixgbe_read_pba_num_generic(hw, &part_num); - dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", - hw->mac.type, hw->phy.type, - (part_num >> 8), (part_num & 0xff)); + if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) + dev_info(&pdev->dev, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, hw->phy.sfp_type, + (part_num >> 8), (part_num & 0xff)); + else + dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, + (part_num >> 8), (part_num & 0xff)); - if (link_width <= IXGBE_PCI_LINK_WIDTH_4) { + if (hw->bus.width <= ixgbe_bus_width_pcie_x4) { dev_warn(&pdev->dev, "PCI-Express bandwidth available for " "this card is not sufficient for optimal " "performance.\n"); @@ -4213,16 +4724,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, "PCI-Express slot is required.\n"); } + /* save off EEPROM version number */ + hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version); + /* reset the hardware with the new settings */ hw->mac.ops.start_hw(hw); - /* link_config depends on start_hw being called at least once */ - err = ixgbe_link_config(hw); - if (err) { - dev_err(&pdev->dev, "setup_link_speed FAILED %d\n", err); - goto err_register; - } - netif_carrier_off(netdev); strcpy(netdev->name, "eth%d"); @@ -4253,6 +4760,8 @@ err_eeprom: clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); del_timer_sync(&adapter->sfp_timer); cancel_work_sync(&adapter->sfp_task); + cancel_work_sync(&adapter->multispeed_fiber_task); + cancel_work_sync(&adapter->sfp_config_module_task); iounmap(hw->hw_addr); err_ioremap: free_netdev(netdev); @@ -4289,6 +4798,8 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) del_timer_sync(&adapter->sfp_timer); cancel_work_sync(&adapter->watchdog_task); cancel_work_sync(&adapter->sfp_task); + cancel_work_sync(&adapter->multispeed_fiber_task); + cancel_work_sync(&adapter->sfp_config_module_task); flush_scheduled_work(); #ifdef CONFIG_IXGBE_DCA @@ -4372,7 +4883,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3cold, 0); ixgbe_reset(adapter); - + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); result = PCI_ERS_RESULT_RECOVERED; } diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 5a8669aedf6..14e9606aa3b 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -32,6 +32,18 @@ #include "ixgbe_common.h" #include "ixgbe_phy.h" +static void ixgbe_i2c_start(struct ixgbe_hw *hw); +static void ixgbe_i2c_stop(struct ixgbe_hw *hw); +static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data); +static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data); +static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw); +static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data); +static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data); +static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); +static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); +static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data); +static bool ixgbe_get_i2c_data(u32 *i2cctl); +static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw); static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr); static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); @@ -543,8 +555,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) u8 identifier = 0; u8 comp_codes_1g = 0; u8 comp_codes_10g = 0; - u8 oui_bytes[4] = {0, 0, 0, 0}; + u8 oui_bytes[3] = {0, 0, 0}; u8 transmission_media = 0; + u16 enforce_sfp = 0; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, &identifier); @@ -564,18 +577,48 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) /* ID Module * ========= - * 0 SFP_DA_CU - * 1 SFP_SR - * 2 SFP_LR + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CORE0 - 82599-specific + * 4 SFP_DA_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific */ - if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_da_cu; - else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_sr; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_lr; - else - hw->phy.sfp_type = ixgbe_sfp_type_unknown; + if (hw->mac.type == ixgbe_mac_82598EB) { + if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu; + else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_sr; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_lr; + else + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } else if (hw->mac.type == ixgbe_mac_82599EB) { + if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core1; + else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core1; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core1; + else + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } /* Determine PHY vendor */ if (hw->phy.type == ixgbe_phy_unknown) { @@ -607,6 +650,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) case IXGBE_SFF_VENDOR_OUI_AVAGO: hw->phy.type = ixgbe_phy_sfp_avago; break; + case IXGBE_SFF_VENDOR_OUI_INTEL: + hw->phy.type = ixgbe_phy_sfp_intel; + break; default: if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) @@ -616,7 +662,28 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) break; } } - status = 0; + if (hw->mac.type == ixgbe_mac_82598EB || + (hw->phy.sfp_type != ixgbe_sfp_type_sr && + hw->phy.sfp_type != ixgbe_sfp_type_lr && + hw->phy.sfp_type != ixgbe_sfp_type_srlr_core0 && + hw->phy.sfp_type != ixgbe_sfp_type_srlr_core1)) { + status = 0; + goto out; + } + + hw->eeprom.ops.read(hw, IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET, + &enforce_sfp); + if (!(enforce_sfp & IXGBE_PHY_ALLOW_ANY_SFP)) { + /* Make sure we're a supported PHY type */ + if (hw->phy.type == ixgbe_phy_sfp_intel) { + status = 0; + } else { + hw_dbg(hw, "SFP+ module not supported\n"); + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } + } else { + status = 0; + } } out: @@ -651,7 +718,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); if ((!*list_offset) || (*list_offset == 0xFFFF)) - return IXGBE_ERR_PHY; + return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; /* Shift offset to first ID word */ (*list_offset)++; @@ -688,6 +755,501 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, } /** + * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + return hw->phy.ops.read_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); +} + +/** + * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to write + * @eeprom_data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 eeprom_data) +{ + return hw->phy.ops.write_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); +} + +/** + * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified deivce address. + **/ +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + s32 status = 0; + u32 max_retry = 1; + u32 retry = 0; + bool nack = 1; + + do { + ixgbe_i2c_start(hw); + + /* Device Address and write indication */ + status = ixgbe_clock_out_i2c_byte(hw, dev_addr); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, byte_offset); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + ixgbe_i2c_start(hw); + + /* Device Address and read indication */ + status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1)); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_in_i2c_byte(hw, data); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_bit(hw, nack); + if (status != 0) + goto fail; + + ixgbe_i2c_stop(hw); + break; + +fail: + ixgbe_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte read error - Retrying.\n"); + else + hw_dbg(hw, "I2C byte read error.\n"); + + } while (retry < max_retry); + + return status; +} + +/** + * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + s32 status = 0; + u32 max_retry = 1; + u32 retry = 0; + + do { + ixgbe_i2c_start(hw); + + status = ixgbe_clock_out_i2c_byte(hw, dev_addr); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, byte_offset); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, data); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + ixgbe_i2c_stop(hw); + break; + +fail: + ixgbe_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte write error - Retrying.\n"); + else + hw_dbg(hw, "I2C byte write error.\n"); + } while (retry < max_retry); + + return status; +} + +/** + * ixgbe_i2c_start - Sets I2C start condition + * @hw: pointer to hardware structure + * + * Sets I2C start condition (High -> Low on SDA while SCL is High) + **/ +static void ixgbe_i2c_start(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + /* Start condition must begin with data and clock high */ + ixgbe_set_i2c_data(hw, &i2cctl, 1); + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for start condition (4.7us) */ + udelay(IXGBE_I2C_T_SU_STA); + + ixgbe_set_i2c_data(hw, &i2cctl, 0); + + /* Hold time for start condition (4us) */ + udelay(IXGBE_I2C_T_HD_STA); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + +} + +/** + * ixgbe_i2c_stop - Sets I2C stop condition + * @hw: pointer to hardware structure + * + * Sets I2C stop condition (Low -> High on SDA while SCL is High) + **/ +static void ixgbe_i2c_stop(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + /* Stop condition must begin with data low and clock high */ + ixgbe_set_i2c_data(hw, &i2cctl, 0); + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for stop condition (4us) */ + udelay(IXGBE_I2C_T_SU_STO); + + ixgbe_set_i2c_data(hw, &i2cctl, 1); + + /* bus free time between stop and start (4.7us)*/ + udelay(IXGBE_I2C_T_BUF); +} + +/** + * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte to clock in + * + * Clocks in one byte data via I2C data/clock + **/ +static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) +{ + s32 status = 0; + s32 i; + bool bit = 0; + + for (i = 7; i >= 0; i--) { + status = ixgbe_clock_in_i2c_bit(hw, &bit); + *data |= bit << i; + + if (status != 0) + break; + } + + return status; +} + +/** + * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte clocked out + * + * Clocks out one byte data via I2C data/clock + **/ +static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) +{ + s32 status = 0; + s32 i; + u32 i2cctl; + bool bit = 0; + + for (i = 7; i >= 0; i--) { + bit = (data >> i) & 0x1; + status = ixgbe_clock_out_i2c_bit(hw, bit); + + if (status != 0) + break; + } + + /* Release SDA line (set high) */ + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + i2cctl |= IXGBE_I2C_DATA_OUT; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl); + + return status; +} + +/** + * ixgbe_get_i2c_ack - Polls for I2C ACK + * @hw: pointer to hardware structure + * + * Clocks in/out one bit via I2C data/clock + **/ +static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) +{ + s32 status; + u32 i = 0; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 timeout = 10; + bool ack = 1; + + status = ixgbe_raise_i2c_clk(hw, &i2cctl); + + if (status != 0) + goto out; + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + /* Poll for ACK. Note that ACK in I2C spec is + * transition from 1 to 0 */ + for (i = 0; i < timeout; i++) { + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + ack = ixgbe_get_i2c_data(&i2cctl); + + udelay(1); + if (ack == 0) + break; + } + + if (ack == 1) { + hw_dbg(hw, "I2C ack was not received.\n"); + status = IXGBE_ERR_I2C; + } + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + +out: + return status; +} + +/** + * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: read data value + * + * Clocks in one bit via I2C data/clock + **/ +static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) +{ + s32 status; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + status = ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + *data = ixgbe_get_i2c_data(&i2cctl); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + + return status; +} + +/** + * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: data value to write + * + * Clocks out one bit via I2C data/clock + **/ +static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) +{ + s32 status; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + status = ixgbe_set_i2c_data(hw, &i2cctl, data); + if (status == 0) { + status = ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us. + * This also takes care of the data hold time. + */ + udelay(IXGBE_I2C_T_LOW); + } else { + status = IXGBE_ERR_I2C; + hw_dbg(hw, "I2C data was not set to %X\n", data); + } + + return status; +} +/** + * ixgbe_raise_i2c_clk - Raises the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Raises the I2C clock line '0'->'1' + **/ +static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) +{ + s32 status = 0; + + *i2cctl |= IXGBE_I2C_CLK_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + + /* SCL rise time (1000ns) */ + udelay(IXGBE_I2C_T_RISE); + + return status; +} + +/** + * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Lowers the I2C clock line '1'->'0' + **/ +static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) +{ + + *i2cctl &= ~IXGBE_I2C_CLK_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + + /* SCL fall time (300ns) */ + udelay(IXGBE_I2C_T_FALL); +} + +/** + * ixgbe_set_i2c_data - Sets the I2C data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * @data: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + **/ +static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) +{ + s32 status = 0; + + if (data) + *i2cctl |= IXGBE_I2C_DATA_OUT; + else + *i2cctl &= ~IXGBE_I2C_DATA_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + + /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ + udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); + + /* Verify data was set correctly */ + *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + if (data != ixgbe_get_i2c_data(i2cctl)) { + status = IXGBE_ERR_I2C; + hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); + } + + return status; +} + +/** + * ixgbe_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + **/ +static bool ixgbe_get_i2c_data(u32 *i2cctl) +{ + bool data; + + if (*i2cctl & IXGBE_I2C_DATA_IN) + data = 1; + else + data = 0; + + return data; +} + +/** + * ixgbe_i2c_bus_clear - Clears the I2C bus + * @hw: pointer to hardware structure + * + * Clears the I2C bus by sending nine clock pulses. + * Used when data line is stuck low. + **/ +static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i; + + ixgbe_set_i2c_data(hw, &i2cctl, 1); + + for (i = 0; i < 9; i++) { + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Min high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Min low period of clock is 4.7us*/ + udelay(IXGBE_I2C_T_LOW); + } + + /* Put the i2c bus back to default state */ + ixgbe_i2c_stop(hw); +} + +/** * ixgbe_check_phy_link_tnx - Determine link and speed status * @hw: pointer to hardware structure * diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h index 43a97bc420f..cc5f1b3287e 100644 --- a/drivers/net/ixgbe/ixgbe_phy.h +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -54,14 +54,15 @@ #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 /* Bit-shift macros */ -#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 12 -#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 8 -#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 4 +#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24 +#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16 +#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8 /* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ #define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600 #define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500 #define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00 +#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100 /* I2C SDA and SCL timing parameters for standard mode */ #define IXGBE_I2C_T_HD_STA 4 @@ -101,5 +102,12 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 *list_offset, u16 *data_offset); - +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data); +s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 eeprom_data); #endif /* _IXGBE_PHY_H_ */ diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index f011c57c920..2b2ecba7b60 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -34,6 +34,8 @@ #define IXGBE_INTEL_VENDOR_ID 0x8086 /* Device IDs */ +#define IXGBE_DEV_ID_82598 0x10B6 +#define IXGBE_DEV_ID_82598_BX 0x1508 #define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6 #define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7 #define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB @@ -43,6 +45,9 @@ #define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1 #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1 #define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4 +#define IXGBE_DEV_ID_82599 0x10D8 +#define IXGBE_DEV_ID_82599_KX4 0x10F7 +#define IXGBE_DEV_ID_82599_SFP 0x10FB /* General Registers */ #define IXGBE_CTRL 0x00000 @@ -50,9 +55,12 @@ #define IXGBE_CTRL_EXT 0x00018 #define IXGBE_ESDP 0x00020 #define IXGBE_EODSDP 0x00028 +#define IXGBE_I2CCTL 0x00028 #define IXGBE_LEDCTL 0x00200 #define IXGBE_FRTIMER 0x00048 #define IXGBE_TCPTIMER 0x0004C +#define IXGBE_CORESPARE 0x00600 +#define IXGBE_EXVET 0x05078 /* NVM Registers */ #define IXGBE_EEC 0x10010 @@ -66,6 +74,19 @@ #define IXGBE_FLOP 0x1013C #define IXGBE_GRC 0x10200 +/* General Receive Control */ +#define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */ +#define IXGBE_GRC_APME 0x00000002 /* Advanced Power Management Enable */ + +#define IXGBE_VPDDIAG0 0x10204 +#define IXGBE_VPDDIAG1 0x10208 + +/* I2CCTL Bit Masks */ +#define IXGBE_I2C_CLK_IN 0x00000001 +#define IXGBE_I2C_CLK_OUT 0x00000002 +#define IXGBE_I2C_DATA_IN 0x00000004 +#define IXGBE_I2C_DATA_OUT 0x00000008 + /* Interrupt Registers */ #define IXGBE_EICR 0x00800 #define IXGBE_EICS 0x00808 @@ -73,28 +94,63 @@ #define IXGBE_EIMC 0x00888 #define IXGBE_EIAC 0x00810 #define IXGBE_EIAM 0x00890 -#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : (0x012300 + ((_i) * 4))) +#define IXGBE_EICS_EX(_i) (0x00A90 + (_i) * 4) +#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4) +#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4) +#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4) +/* + * 82598 EITR is 16 bits but set the limits based on the max + * supported by all ixgbe hardware. 82599 EITR is only 12 bits, + * with the lower 3 always zero. + */ +#define IXGBE_MAX_INT_RATE 488281 +#define IXGBE_MIN_INT_RATE 956 +#define IXGBE_MAX_EITR 0x00000FF8 +#define IXGBE_MIN_EITR 8 +#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \ + (0x012300 + (((_i) - 24) * 4))) +#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8 +#define IXGBE_EITR_LLI_MOD 0x00008000 +#define IXGBE_EITR_CNT_WDIS 0x80000000 #define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */ +#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */ +#define IXGBE_EITRSEL 0x00894 #define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */ #define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */ #define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4))) #define IXGBE_GPIE 0x00898 /* Flow Control Registers */ +#define IXGBE_FCADBUL 0x03210 +#define IXGBE_FCADBUH 0x03214 +#define IXGBE_FCAMACL 0x04328 +#define IXGBE_FCAMACH 0x0432C +#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */ #define IXGBE_PFCTOP 0x03008 #define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */ #define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */ #define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */ #define IXGBE_FCRTV 0x032A0 +#define IXGBE_FCCFG 0x03D00 #define IXGBE_TFCS 0x0CE00 /* Receive DMA Registers */ -#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : (0x0D000 + ((_i - 64) * 0x40))) -#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : (0x0D004 + ((_i - 64) * 0x40))) -#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : (0x0D008 + ((_i - 64) * 0x40))) -#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : (0x0D010 + ((_i - 64) * 0x40))) -#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : (0x0D018 + ((_i - 64) * 0x40))) -#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : (0x0D028 + ((_i - 64) * 0x40))) +#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \ + (0x0D000 + ((_i - 64) * 0x40))) +#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \ + (0x0D004 + ((_i - 64) * 0x40))) +#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \ + (0x0D008 + ((_i - 64) * 0x40))) +#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \ + (0x0D010 + ((_i - 64) * 0x40))) +#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \ + (0x0D018 + ((_i - 64) * 0x40))) +#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \ + (0x0D028 + ((_i - 64) * 0x40))) +#define IXGBE_RDDCC 0x02F20 +#define IXGBE_RXMEMWRAP 0x03190 +#define IXGBE_STARCTRL 0x03024 /* * Split and Replication Receive Control Registers * 00-15 : 0x02100 + n*4 @@ -127,10 +183,15 @@ #define IXGBE_DRECCCTL_DISABLE 0 /* Multicast Table Array - 128 entries */ #define IXGBE_MTA(_i) (0x05200 + ((_i) * 4)) -#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : (0x0A200 + ((_i) * 8))) -#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : (0x0A204 + ((_i) * 8))) +#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x0A200 + ((_i) * 8))) +#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x0A204 + ((_i) * 8))) +#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8)) +#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8)) /* Packet split receive type */ -#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : (0x0EA00 + ((_i) * 4))) +#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \ + (0x0EA00 + ((_i) * 4))) /* array of 4096 1-bit vlan filters */ #define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4)) /*array of 4096 4-bit vlan vmdq indices */ @@ -139,6 +200,28 @@ #define IXGBE_VLNCTRL 0x05088 #define IXGBE_MCSTCTRL 0x05090 #define IXGBE_MRQC 0x05818 +#define IXGBE_SAQF(_i) (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */ +#define IXGBE_DAQF(_i) (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */ +#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */ +#define IXGBE_FTQF(_i) (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */ +#define IXGBE_ETQF(_i) (0x05128 + ((_i) * 4)) /* EType Queue Filter */ +#define IXGBE_ETQS(_i) (0x0EC00 + ((_i) * 4)) /* EType Queue Select */ +#define IXGBE_SYNQF 0x0EC30 /* SYN Packet Queue Filter */ +#define IXGBE_RQTC 0x0EC70 +#define IXGBE_MTQC 0x08120 +#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */ +#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */ +#define IXGBE_VT_CTL 0x051B0 +#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4)) +#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4)) +#define IXGBE_QDE 0x2F04 +#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */ +#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4)) +#define IXGBE_VMRCTL(_i) (0x0F600 + ((_i) * 4)) +#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4)) +#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4)) +#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/ +#define IXGBE_LLITHRESH 0x0EC90 #define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */ #define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */ #define IXGBE_IMIRVP 0x05AC0 @@ -146,7 +229,6 @@ #define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */ #define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */ - /* Transmit DMA registers */ #define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/ #define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40)) @@ -158,7 +240,20 @@ #define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40)) #define IXGBE_DTXCTL 0x07E00 +#define IXGBE_DMATXCTL 0x04A80 +#define IXGBE_DTXMXSZRQ 0x08100 +#define IXGBE_DTXTCPFLGL 0x04A88 +#define IXGBE_DTXTCPFLGH 0x04A8C +#define IXGBE_LBDRPEN 0x0CA00 +#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */ + +#define IXGBE_DMATXCTL_TE 0x1 /* Transmit Enable */ +#define IXGBE_DMATXCTL_NS 0x2 /* No Snoop LSO hdr buffer */ +#define IXGBE_DMATXCTL_GDV 0x8 /* Global Double VLAN */ +#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */ #define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */ +/* Tx DCA Control register : 128 of these (0-127) */ +#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40)) #define IXGBE_TIPG 0x0CB00 #define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */ #define IXGBE_MNGTXMAP 0x0CD10 @@ -175,9 +270,69 @@ #define IXGBE_WUPL 0x05900 #define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */ -#define IXGBE_FHFT 0x09000 /* Flex host filter table 9000-93FC */ - -/* Music registers */ +#define IXGBE_FHFT(_n) (0x09000 + (_n * 0x100)) /* Flex host filter table */ +#define IXGBE_FHFT_EXT(_n) (0x09800 + (_n * 0x100)) /* Ext Flexible Host + * Filter Table */ + +#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX 4 +#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX 2 + +/* Each Flexible Filter is at most 128 (0x80) bytes in length */ +#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX 128 +#define IXGBE_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */ +#define IXGBE_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */ + +/* Definitions for power management and wakeup registers */ +/* Wake Up Control */ +#define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */ +#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define IXGBE_WUC_ADVD3WUC 0x00000010 /* D3Cold wake up cap. enable*/ + +/* Wake Up Filter Control */ +#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define IXGBE_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define IXGBE_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define IXGBE_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define IXGBE_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define IXGBE_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define IXGBE_WUFC_MNG 0x00000100 /* Directed Mgmt Packet Wakeup Enable */ + +#define IXGBE_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ +#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ +#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ +#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ +#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ +#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */ +#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */ +#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */ +#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */ +#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all 6 wakeup filters*/ +#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ + +/* Wake Up Status */ +#define IXGBE_WUS_LNKC IXGBE_WUFC_LNKC +#define IXGBE_WUS_MAG IXGBE_WUFC_MAG +#define IXGBE_WUS_EX IXGBE_WUFC_EX +#define IXGBE_WUS_MC IXGBE_WUFC_MC +#define IXGBE_WUS_BC IXGBE_WUFC_BC +#define IXGBE_WUS_ARP IXGBE_WUFC_ARP +#define IXGBE_WUS_IPV4 IXGBE_WUFC_IPV4 +#define IXGBE_WUS_IPV6 IXGBE_WUFC_IPV6 +#define IXGBE_WUS_MNG IXGBE_WUFC_MNG +#define IXGBE_WUS_FLX0 IXGBE_WUFC_FLX0 +#define IXGBE_WUS_FLX1 IXGBE_WUFC_FLX1 +#define IXGBE_WUS_FLX2 IXGBE_WUFC_FLX2 +#define IXGBE_WUS_FLX3 IXGBE_WUFC_FLX3 +#define IXGBE_WUS_FLX4 IXGBE_WUFC_FLX4 +#define IXGBE_WUS_FLX5 IXGBE_WUFC_FLX5 +#define IXGBE_WUS_FLX_FILTERS IXGBE_WUFC_FLX_FILTERS + +/* Wake Up Packet Length */ +#define IXGBE_WUPL_LENGTH_MASK 0xFFFF + +/* DCB registers */ #define IXGBE_RMCS 0x03D00 #define IXGBE_DPMCS 0x07F40 #define IXGBE_PDPMCS 0x0CD00 @@ -190,6 +345,122 @@ #define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ +/* Security Control Registers */ +#define IXGBE_SECTXCTRL 0x08800 +#define IXGBE_SECTXSTAT 0x08804 +#define IXGBE_SECTXBUFFAF 0x08808 +#define IXGBE_SECTXMINIFG 0x08810 +#define IXGBE_SECTXSTAT 0x08804 +#define IXGBE_SECRXCTRL 0x08D00 +#define IXGBE_SECRXSTAT 0x08D04 + +/* Security Bit Fields and Masks */ +#define IXGBE_SECTXCTRL_SECTX_DIS 0x00000001 +#define IXGBE_SECTXCTRL_TX_DIS 0x00000002 +#define IXGBE_SECTXCTRL_STORE_FORWARD 0x00000004 + +#define IXGBE_SECTXSTAT_SECTX_RDY 0x00000001 +#define IXGBE_SECTXSTAT_ECC_TXERR 0x00000002 + +#define IXGBE_SECRXCTRL_SECRX_DIS 0x00000001 +#define IXGBE_SECRXCTRL_RX_DIS 0x00000002 + +#define IXGBE_SECRXSTAT_SECRX_RDY 0x00000001 +#define IXGBE_SECRXSTAT_ECC_RXERR 0x00000002 + +/* LinkSec (MacSec) Registers */ +#define IXGBE_LSECTXCAP 0x08A00 +#define IXGBE_LSECRXCAP 0x08F00 +#define IXGBE_LSECTXCTRL 0x08A04 +#define IXGBE_LSECTXSCL 0x08A08 /* SCI Low */ +#define IXGBE_LSECTXSCH 0x08A0C /* SCI High */ +#define IXGBE_LSECTXSA 0x08A10 +#define IXGBE_LSECTXPN0 0x08A14 +#define IXGBE_LSECTXPN1 0x08A18 +#define IXGBE_LSECTXKEY0(_n) (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */ +#define IXGBE_LSECTXKEY1(_n) (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */ +#define IXGBE_LSECRXCTRL 0x08F04 +#define IXGBE_LSECRXSCL 0x08F08 +#define IXGBE_LSECRXSCH 0x08F0C +#define IXGBE_LSECRXSA(_i) (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */ +#define IXGBE_LSECRXPN(_i) (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */ +#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m)))) +#define IXGBE_LSECTXUT 0x08A3C /* OutPktsUntagged */ +#define IXGBE_LSECTXPKTE 0x08A40 /* OutPktsEncrypted */ +#define IXGBE_LSECTXPKTP 0x08A44 /* OutPktsProtected */ +#define IXGBE_LSECTXOCTE 0x08A48 /* OutOctetsEncrypted */ +#define IXGBE_LSECTXOCTP 0x08A4C /* OutOctetsProtected */ +#define IXGBE_LSECRXUT 0x08F40 /* InPktsUntagged/InPktsNoTag */ +#define IXGBE_LSECRXOCTD 0x08F44 /* InOctetsDecrypted */ +#define IXGBE_LSECRXOCTV 0x08F48 /* InOctetsValidated */ +#define IXGBE_LSECRXBAD 0x08F4C /* InPktsBadTag */ +#define IXGBE_LSECRXNOSCI 0x08F50 /* InPktsNoSci */ +#define IXGBE_LSECRXUNSCI 0x08F54 /* InPktsUnknownSci */ +#define IXGBE_LSECRXUNCH 0x08F58 /* InPktsUnchecked */ +#define IXGBE_LSECRXDELAY 0x08F5C /* InPktsDelayed */ +#define IXGBE_LSECRXLATE 0x08F60 /* InPktsLate */ +#define IXGBE_LSECRXOK(_n) (0x08F64 + (0x04 * (_n))) /* InPktsOk */ +#define IXGBE_LSECRXINV(_n) (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */ +#define IXGBE_LSECRXNV(_n) (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */ +#define IXGBE_LSECRXUNSA 0x08F7C /* InPktsUnusedSa */ +#define IXGBE_LSECRXNUSA 0x08F80 /* InPktsNotUsingSa */ + +/* LinkSec (MacSec) Bit Fields and Masks */ +#define IXGBE_LSECTXCAP_SUM_MASK 0x00FF0000 +#define IXGBE_LSECTXCAP_SUM_SHIFT 16 +#define IXGBE_LSECRXCAP_SUM_MASK 0x00FF0000 +#define IXGBE_LSECRXCAP_SUM_SHIFT 16 + +#define IXGBE_LSECTXCTRL_EN_MASK 0x00000003 +#define IXGBE_LSECTXCTRL_DISABLE 0x0 +#define IXGBE_LSECTXCTRL_AUTH 0x1 +#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT 0x2 +#define IXGBE_LSECTXCTRL_AISCI 0x00000020 +#define IXGBE_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 +#define IXGBE_LSECTXCTRL_RSV_MASK 0x000000D8 + +#define IXGBE_LSECRXCTRL_EN_MASK 0x0000000C +#define IXGBE_LSECRXCTRL_EN_SHIFT 2 +#define IXGBE_LSECRXCTRL_DISABLE 0x0 +#define IXGBE_LSECRXCTRL_CHECK 0x1 +#define IXGBE_LSECRXCTRL_STRICT 0x2 +#define IXGBE_LSECRXCTRL_DROP 0x3 +#define IXGBE_LSECRXCTRL_PLSH 0x00000040 +#define IXGBE_LSECRXCTRL_RP 0x00000080 +#define IXGBE_LSECRXCTRL_RSV_MASK 0xFFFFFF33 + +/* IpSec Registers */ +#define IXGBE_IPSTXIDX 0x08900 +#define IXGBE_IPSTXSALT 0x08904 +#define IXGBE_IPSTXKEY(_i) (0x08908 + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXIDX 0x08E00 +#define IXGBE_IPSRXIPADDR(_i) (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXSPI 0x08E14 +#define IXGBE_IPSRXIPIDX 0x08E18 +#define IXGBE_IPSRXKEY(_i) (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXSALT 0x08E2C +#define IXGBE_IPSRXMOD 0x08E30 + +#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4 + +/* DCB registers */ +#define IXGBE_RTRPCS 0x02430 +#define IXGBE_RTTDCS 0x04900 +#define IXGBE_RTTPCS 0x0CD00 +#define IXGBE_RTRUP2TC 0x03020 +#define IXGBE_RTTUP2TC 0x0C800 +#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDQSEL 0x04904 +#define IXGBE_RTTDT1C 0x04908 +#define IXGBE_RTTDT1S 0x0490C +#define IXGBE_RTTDTECC 0x04990 +#define IXGBE_RTTDTECC_NO_BCN 0x00000100 +#define IXGBE_RTTBCNRC 0x04984 /* Stats registers */ #define IXGBE_CRCERRS 0x04000 @@ -204,6 +475,11 @@ #define IXGBE_LXONRXC 0x0CF60 #define IXGBE_LXOFFTXC 0x03F68 #define IXGBE_LXOFFRXC 0x0CF68 +#define IXGBE_LXONRXCNT 0x041A4 +#define IXGBE_LXOFFRXCNT 0x041A8 +#define IXGBE_PXONRXCNT(_i) (0x04140 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_PXOFFRXCNT(_i) (0x04160 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_PXON2OFFCNT(_i) (0x03240 + ((_i) * 4)) /* 8 of these */ #define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/ #define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/ #define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/ @@ -243,14 +519,20 @@ #define IXGBE_MPTC 0x040F0 #define IXGBE_BPTC 0x040F4 #define IXGBE_XEC 0x04120 +#define IXGBE_SSVPC 0x08780 -#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) /* 16 of these */ -#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : (0x08600 + ((_i) * 4))) +#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) +#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \ + (0x08600 + ((_i) * 4))) +#define IXGBE_TQSM(_i) (0x08600 + ((_i) * 4)) #define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */ #define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */ #define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */ #define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */ +#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */ /* Management */ #define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */ @@ -263,6 +545,9 @@ #define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */ #define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */ #define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */ +#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */ +#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_LSWFW 0x15014 /* ARC Subsystem registers */ #define IXGBE_HICR 0x15F00 @@ -295,16 +580,65 @@ #define IXGBE_DCA_ID 0x11070 #define IXGBE_DCA_CTRL 0x11074 +/* PCIe registers 82599-specific */ +#define IXGBE_GCR_EXT 0x11050 +#define IXGBE_GSCL_5_82599 0x11030 +#define IXGBE_GSCL_6_82599 0x11034 +#define IXGBE_GSCL_7_82599 0x11038 +#define IXGBE_GSCL_8_82599 0x1103C +#define IXGBE_PHYADR_82599 0x11040 +#define IXGBE_PHYDAT_82599 0x11044 +#define IXGBE_PHYCTL_82599 0x11048 +#define IXGBE_PBACLR_82599 0x11068 +#define IXGBE_CIAA_82599 0x11088 +#define IXGBE_CIAD_82599 0x1108C +#define IXGBE_PCIE_DIAG_0_82599 0x11090 +#define IXGBE_PCIE_DIAG_1_82599 0x11094 +#define IXGBE_PCIE_DIAG_2_82599 0x11098 +#define IXGBE_PCIE_DIAG_3_82599 0x1109C +#define IXGBE_PCIE_DIAG_4_82599 0x110A0 +#define IXGBE_PCIE_DIAG_5_82599 0x110A4 +#define IXGBE_PCIE_DIAG_6_82599 0x110A8 +#define IXGBE_PCIE_DIAG_7_82599 0x110C0 +#define IXGBE_INTRPT_CSR_82599 0x110B0 +#define IXGBE_INTRPT_MASK_82599 0x110B8 +#define IXGBE_CDQ_MBR_82599 0x110B4 +#define IXGBE_MISC_REG_82599 0x110F0 +#define IXGBE_ECC_CTRL_0_82599 0x11100 +#define IXGBE_ECC_CTRL_1_82599 0x11104 +#define IXGBE_ECC_STATUS_82599 0x110E0 +#define IXGBE_BAR_CTRL_82599 0x110F4 + +/* Time Sync Registers */ +#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */ +#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */ +#define IXGBE_RXSTMPL 0x051E8 /* Rx timestamp Low - RO */ +#define IXGBE_RXSTMPH 0x051A4 /* Rx timestamp High - RO */ +#define IXGBE_RXSATRL 0x051A0 /* Rx timestamp attribute low - RO */ +#define IXGBE_RXSATRH 0x051A8 /* Rx timestamp attribute high - RO */ +#define IXGBE_RXMTRL 0x05120 /* RX message type register low - RW */ +#define IXGBE_TXSTMPL 0x08C04 /* Tx timestamp value Low - RO */ +#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */ +#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */ +#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */ +#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */ +#define IXGBE_RXUDP 0x08C1C /* Time Sync Rx UDP Port - RW */ + /* Diagnostic Registers */ #define IXGBE_RDSTATCTL 0x02C20 #define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */ #define IXGBE_RDHMPN 0x02F08 #define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4)) #define IXGBE_RDPROBE 0x02F20 +#define IXGBE_RDMAM 0x02F30 +#define IXGBE_RDMAD 0x02F34 #define IXGBE_TDSTATCTL 0x07C20 #define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */ #define IXGBE_TDHMPN 0x07F08 +#define IXGBE_TDHMPN2 0x082FC +#define IXGBE_TXDESCIC 0x082CC #define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4)) +#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4)) #define IXGBE_TDPROBE 0x07F20 #define IXGBE_TXBUFCTRL 0x0C600 #define IXGBE_TXBUFDATA0 0x0C610 @@ -332,6 +666,8 @@ #define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/ #define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/ #define IXGBE_PCIEECCCTL 0x1106C +#define IXGBE_PCIEECCCTL0 0x11100 +#define IXGBE_PCIEECCCTL1 0x11104 #define IXGBE_PBTXECC 0x0C300 #define IXGBE_PBRXECC 0x03300 #define IXGBE_GHECCR 0x110B0 @@ -357,24 +693,61 @@ #define IXGBE_MSRWD 0x04260 #define IXGBE_MLADD 0x04264 #define IXGBE_MHADD 0x04268 +#define IXGBE_MAXFRS 0x04268 #define IXGBE_TREG 0x0426C #define IXGBE_PCSS1 0x04288 #define IXGBE_PCSS2 0x0428C #define IXGBE_XPCSS 0x04290 +#define IXGBE_MFLCN 0x04294 #define IXGBE_SERDESC 0x04298 #define IXGBE_MACS 0x0429C #define IXGBE_AUTOC 0x042A0 #define IXGBE_LINKS 0x042A4 +#define IXGBE_LINKS2 0x04324 #define IXGBE_AUTOC2 0x042A8 #define IXGBE_AUTOC3 0x042AC #define IXGBE_ANLP1 0x042B0 #define IXGBE_ANLP2 0x042B4 #define IXGBE_ATLASCTL 0x04800 +#define IXGBE_MMNGC 0x042D0 +#define IXGBE_ANLPNP1 0x042D4 +#define IXGBE_ANLPNP2 0x042D8 +#define IXGBE_KRPCSFC 0x042E0 +#define IXGBE_KRPCSS 0x042E4 +#define IXGBE_FECS1 0x042E8 +#define IXGBE_FECS2 0x042EC +#define IXGBE_SMADARCTL 0x14F10 +#define IXGBE_MPVC 0x04318 +#define IXGBE_SGMIIC 0x04314 + +/* Omer CORECTL */ +#define IXGBE_CORECTL 0x014F00 +/* BARCTRL */ +#define IXGBE_BARCTRL 0x110F4 +#define IXGBE_BARCTRL_FLSIZE 0x0700 +#define IXGBE_BARCTRL_CSRSIZE 0x2000 /* RDRXCTL Bit Masks */ #define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */ +#define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */ #define IXGBE_RDRXCTL_MVMEN 0x00000020 #define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */ +#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */ + +/* RQTC Bit Masks and Shifts */ +#define IXGBE_RQTC_SHIFT_TC(_i) ((_i) * 4) +#define IXGBE_RQTC_TC0_MASK (0x7 << 0) +#define IXGBE_RQTC_TC1_MASK (0x7 << 4) +#define IXGBE_RQTC_TC2_MASK (0x7 << 8) +#define IXGBE_RQTC_TC3_MASK (0x7 << 12) +#define IXGBE_RQTC_TC4_MASK (0x7 << 16) +#define IXGBE_RQTC_TC5_MASK (0x7 << 20) +#define IXGBE_RQTC_TC6_MASK (0x7 << 24) +#define IXGBE_RQTC_TC7_MASK (0x7 << 28) + +/* PSRTYPE.RQPL Bit masks and shift */ +#define IXGBE_PSRTYPE_RQPL_MASK 0x7 +#define IXGBE_PSRTYPE_RQPL_SHIFT 29 /* CTRL Bit Masks */ #define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */ @@ -389,6 +762,7 @@ #define IXGBE_MHADD_MFS_SHIFT 16 /* Extended Device Control */ +#define IXGBE_CTRL_EXT_PFRSTD 0x00004000 /* Physical Function Reset Done */ #define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */ #define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ @@ -401,6 +775,8 @@ #define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ #define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599 0xFF000000 /* Rx CPUID Mask */ +#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */ #define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ #define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ #define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ @@ -409,6 +785,8 @@ #define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */ #define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599 0xFF000000 /* Tx CPUID Mask */ +#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */ #define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ #define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ #define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */ @@ -452,6 +830,8 @@ #define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0 #define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0 +/* Omer bit masks */ +#define IXGBE_CORECTL_WRITE_CMD 0x00010000 /* Device Type definitions for new protocol MDIO commands */ #define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1 @@ -479,8 +859,11 @@ #define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Ability Reg */ #define IXGBE_MDIO_PHY_SPEED_10G 0x0001 /* 10G capable */ #define IXGBE_MDIO_PHY_SPEED_1G 0x0010 /* 1G capable */ +#define IXGBE_MDIO_PHY_EXT_ABILITY 0xB /* Ext Ability Reg */ +#define IXGBE_MDIO_PHY_10GBASET_ABILITY 0x0004 /* 10GBaseT capable */ +#define IXGBE_MDIO_PHY_1000BASET_ABILITY 0x0020 /* 1000BaseT capable */ -#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Address Reg */ +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */ @@ -495,7 +878,7 @@ #define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0 #define IXGBE_MAX_PHY_ADDR 32 -/* PHY IDs */ +/* PHY IDs*/ #define TN1010_PHY_ID 0x00A19410 #define TNX_FW_REV 0xB #define QT2022_PHY_ID 0x0043A400 @@ -515,15 +898,22 @@ #define IXGBE_CONTROL_NL 0x000F #define IXGBE_CONTROL_EOL_NL 0x0FFF #define IXGBE_CONTROL_SOL_NL 0x0000 +#define IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET 0x002C +#define IXGBE_PHY_ALLOW_ANY_SFP 0x1 /* General purpose Interrupt Enable */ #define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */ #define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */ +#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */ #define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */ #define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */ #define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */ #define IXGBE_GPIE_EIAME 0x40000000 #define IXGBE_GPIE_PBA_SUPPORT 0x80000000 +#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */ +#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */ +#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */ +#define IXGBE_GPIE_VTMODE_64 0x0000C000 /* 64 VFs 2 queues per VF */ /* Transmit Flow Control status */ #define IXGBE_TFCS_TXOFF 0x00000001 @@ -564,6 +954,21 @@ #define IXGBE_VMD_CTL_VMDQ_EN 0x00000001 #define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002 +/* VT_CTL bitmasks */ +#define IXGBE_VT_CTL_DIS_DEFPL 0x20000000 /* disable default pool */ +#define IXGBE_VT_CTL_REPLEN 0x40000000 /* replication enabled */ +#define IXGBE_VT_CTL_VT_ENABLE 0x00000001 /* Enable VT Mode */ + +/* VMOLR bitmasks */ +#define IXGBE_VMOLR_AUPE 0x01000000 /* accept untagged packets */ +#define IXGBE_VMOLR_ROMPE 0x02000000 /* accept packets in MTA tbl */ +#define IXGBE_VMOLR_ROPE 0x04000000 /* accept packets in UC tbl */ +#define IXGBE_VMOLR_BAM 0x08000000 /* accept broadcast packets */ +#define IXGBE_VMOLR_MPE 0x10000000 /* multicast promiscuous */ + +/* VFRE bitmask */ +#define IXGBE_VFRE_ENABLE_ALL 0xFFFFFFFF + /* RDHMPN and TDHMPN bitmasks */ #define IXGBE_RDHMPN_RDICADDR 0x007FF800 #define IXGBE_RDHMPN_RDICRDREQ 0x00800000 @@ -572,13 +977,39 @@ #define IXGBE_TDHMPN_TDICRDREQ 0x00800000 #define IXGBE_TDHMPN_TDICADDR_SHIFT 11 +#define IXGBE_RDMAM_MEM_SEL_SHIFT 13 +#define IXGBE_RDMAM_DWORD_SHIFT 9 +#define IXGBE_RDMAM_DESC_COMP_FIFO 1 +#define IXGBE_RDMAM_DFC_CMD_FIFO 2 +#define IXGBE_RDMAM_TCN_STATUS_RAM 4 +#define IXGBE_RDMAM_WB_COLL_FIFO 5 +#define IXGBE_RDMAM_QSC_CNT_RAM 6 +#define IXGBE_RDMAM_QSC_QUEUE_CNT 8 +#define IXGBE_RDMAM_QSC_QUEUE_RAM 0xA +#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE 135 +#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT 4 +#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE 48 +#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT 7 +#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE 256 +#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT 9 +#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE 8 +#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT 4 +#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE 64 +#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT 4 +#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE 32 +#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT 4 +#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE 128 +#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT 8 + +#define IXGBE_TXDESCIC_READY 0x80000000 + /* Receive Checksum Control */ #define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ #define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ /* FCRTL Bit Masks */ -#define IXGBE_FCRTL_XONE 0x80000000 /* bit 31, XON enable */ -#define IXGBE_FCRTH_FCEN 0x80000000 /* Rx Flow control enable */ +#define IXGBE_FCRTL_XONE 0x80000000 /* XON enable */ +#define IXGBE_FCRTH_FCEN 0x80000000 /* Packet buffer fc enable */ /* PAP bit masks*/ #define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */ @@ -588,19 +1019,29 @@ /* Receive Arbitration Control: 0 Round Robin, 1 DFP */ #define IXGBE_RMCS_RAC 0x00000004 #define IXGBE_RMCS_DFP IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */ -#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority flow control ena */ -#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority flow control ena */ +#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority FC ena */ +#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority FC ena */ #define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */ +/* FCCFG Bit Masks */ +#define IXGBE_FCCFG_TFCE_802_3X 0x00000008 /* Tx link FC enable */ +#define IXGBE_FCCFG_TFCE_PRIORITY 0x00000010 /* Tx priority FC enable */ /* Interrupt register bitmasks */ /* Extended Interrupt Cause Read */ #define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */ +#define IXGBE_EICR_FLOW_DIR 0x00010000 /* FDir Exception */ +#define IXGBE_EICR_RX_MISS 0x00020000 /* Packet Buffer Overrun */ +#define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */ +#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */ #define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */ +#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */ #define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */ #define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */ #define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */ +#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */ +#define IXGBE_EICR_ECC 0x10000000 /* ECC Error */ #define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */ #define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */ #define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ @@ -608,10 +1049,16 @@ /* Extended Interrupt Cause Set */ #define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EICS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EICS_RX_MISS IXGBE_EICR_RX_MISS /* Pkt Buffer Overrun */ +#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ #define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */ #define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ #define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */ #define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ #define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */ #define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ @@ -619,10 +1066,16 @@ /* Extended Interrupt Mask Set */ #define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EIMS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EIMS_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */ +#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ #define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */ #define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ #define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */ #define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ #define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */ #define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ @@ -630,10 +1083,16 @@ /* Extended Interrupt Mask Clear */ #define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EIMC_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EIMC_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */ +#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ #define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */ #define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ #define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */ #define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ #define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */ #define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ @@ -656,6 +1115,33 @@ #define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ #define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ #define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */ +#define IXGBE_IMIR_SIZE_BP_82599 0x00001000 /* Packet size bypass */ +#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */ +#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */ +#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */ +#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */ +#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */ +#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */ +#define IXGBE_IMIR_CTRL_BP_82599 0x00080000 /* Bypass check of control bits */ +#define IXGBE_IMIR_LLI_EN_82599 0x00100000 /* Enables low latency Int */ +#define IXGBE_IMIR_RX_QUEUE_MASK_82599 0x0000007F /* Rx Queue Mask */ +#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */ +#define IXGBE_IMIRVP_PRIORITY_MASK 0x00000007 /* VLAN priority mask */ +#define IXGBE_IMIRVP_PRIORITY_EN 0x00000008 /* VLAN priority enable */ + +#define IXGBE_MAX_FTQF_FILTERS 128 +#define IXGBE_FTQF_PROTOCOL_MASK 0x00000003 +#define IXGBE_FTQF_PROTOCOL_TCP 0x00000000 +#define IXGBE_FTQF_PROTOCOL_UDP 0x00000001 +#define IXGBE_FTQF_PROTOCOL_SCTP 2 +#define IXGBE_FTQF_PRIORITY_MASK 0x00000007 +#define IXGBE_FTQF_PRIORITY_SHIFT 2 +#define IXGBE_FTQF_POOL_MASK 0x0000003F +#define IXGBE_FTQF_POOL_SHIFT 8 +#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F +#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25 +#define IXGBE_FTQF_POOL_MASK_EN 0x40000000 +#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000 /* Interrupt clear mask */ #define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF @@ -675,6 +1161,31 @@ #define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */ +/* ETYPE Queue Filter/Select Bit Masks */ +#define IXGBE_MAX_ETQF_FILTERS 8 +#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */ +#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */ +#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */ +#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */ + +#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */ +#define IXGBE_ETQS_RX_QUEUE_SHIFT 16 +#define IXGBE_ETQS_LLI 0x20000000 /* bit 29 */ +#define IXGBE_ETQS_QUEUE_EN 0x80000000 /* bit 31 */ + +/* + * ETQF filter list: one static filter per filter consumer. This is + * to avoid filter collisions later. Add new filters + * here!! + * + * Current filters: + * EAPOL 802.1x (0x888e): Filter 0 + * BCN (0x8904): Filter 1 + * 1588 (0x88f7): Filter 3 + */ +#define IXGBE_ETQF_FILTER_EAPOL 0 +#define IXGBE_ETQF_FILTER_BCN 1 +#define IXGBE_ETQF_FILTER_1588 3 /* VLAN Control Bit Masks */ #define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */ #define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */ @@ -682,21 +1193,28 @@ #define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */ #define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */ +/* VLAN pool filtering masks */ +#define IXGBE_VLVF_VIEN 0x80000000 /* filter is valid */ +#define IXGBE_VLVF_ENTRIES 64 #define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */ /* STATUS Bit Masks */ -#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */ -#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Enable Status */ +#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */ +#define IXGBE_STATUS_LAN_ID_SHIFT 2 /* LAN ID Shift*/ +#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Enable Status */ #define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */ #define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */ /* ESDP Bit Masks */ -#define IXGBE_ESDP_SDP4 0x00000001 /* SDP4 Data Value */ -#define IXGBE_ESDP_SDP5 0x00000002 /* SDP5 Data Value */ +#define IXGBE_ESDP_SDP0 0x00000001 +#define IXGBE_ESDP_SDP1 0x00000002 +#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */ +#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */ +#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */ #define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */ -#define IXGBE_ESDP_SDP5_DIR 0x00000008 /* SDP5 IO direction */ +#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */ /* LEDCTL Bit Masks */ #define IXGBE_LED_IVRT_BASE 0x00000040 @@ -719,6 +1237,7 @@ #define IXGBE_LED_OFF 0xF /* AUTOC Bit Masks */ +#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000 #define IXGBE_AUTOC_KX4_SUPP 0x80000000 #define IXGBE_AUTOC_KX_SUPP 0x40000000 #define IXGBE_AUTOC_PAUSE 0x30000000 @@ -727,9 +1246,17 @@ #define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000 #define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000 #define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000 +#define IXGBE_AUTOC_FECA 0x00040000 +#define IXGBE_AUTOC_FECR 0x00020000 +#define IXGBE_AUTOC_KR_SUPP 0x00010000 #define IXGBE_AUTOC_AN_RESTART 0x00001000 #define IXGBE_AUTOC_FLU 0x00000001 #define IXGBE_AUTOC_LMS_SHIFT 13 +#define IXGBE_AUTOC_LMS_10G_SERIAL (0x3 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR (0x4 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_SGMII_1G_100M (0x5 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT) #define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT) #define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT) #define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT) @@ -738,15 +1265,24 @@ #define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) #define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) -#define IXGBE_AUTOC_1G_PMA_PMD 0x00000200 -#define IXGBE_AUTOC_10G_PMA_PMD 0x00000180 -#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7 -#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9 +#define IXGBE_AUTOC_1G_PMA_PMD_MASK 0x00000200 +#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9 +#define IXGBE_AUTOC_10G_PMA_PMD_MASK 0x00000180 +#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7 #define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) #define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) #define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) #define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) #define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_SFI (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_KX_BX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) + +#define IXGBE_AUTOC2_UPPER_MASK 0xFFFF0000 +#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK 0x00030000 +#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16 +#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) +#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) +#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) /* LINKS Bit Masks */ #define IXGBE_LINKS_KX_AN_COMP 0x80000000 @@ -756,6 +1292,7 @@ #define IXGBE_LINKS_RX_MODE 0x06000000 #define IXGBE_LINKS_TX_MODE 0x01800000 #define IXGBE_LINKS_XGXS_EN 0x00400000 +#define IXGBE_LINKS_SGMII_EN 0x02000000 #define IXGBE_LINKS_PCS_1G_EN 0x00200000 #define IXGBE_LINKS_1G_AN_EN 0x00100000 #define IXGBE_LINKS_KX_AN_IDLE 0x00080000 @@ -765,9 +1302,35 @@ #define IXGBE_LINKS_TL_FAULT 0x00001000 #define IXGBE_LINKS_SIGNAL 0x00000F00 +#define IXGBE_LINKS_SPEED_82599 0x30000000 +#define IXGBE_LINKS_SPEED_10G_82599 0x30000000 +#define IXGBE_LINKS_SPEED_1G_82599 0x20000000 +#define IXGBE_LINKS_SPEED_100_82599 0x10000000 #define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */ #define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */ +#define FIBER_LINK_UP_LIMIT 50 + +/* PCS1GLSTA Bit Masks */ +#define IXGBE_PCS1GLSTA_LINK_OK 1 +#define IXGBE_PCS1GLSTA_SYNK_OK 0x10 +#define IXGBE_PCS1GLSTA_AN_COMPLETE 0x10000 +#define IXGBE_PCS1GLSTA_AN_PAGE_RX 0x20000 +#define IXGBE_PCS1GLSTA_AN_TIMED_OUT 0x40000 +#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT 0x80000 +#define IXGBE_PCS1GLSTA_AN_ERROR_RWS 0x100000 + +#define IXGBE_PCS1GANA_SYM_PAUSE 0x80 +#define IXGBE_PCS1GANA_ASM_PAUSE 0x100 + +/* PCS1GLCTL Bit Masks */ +#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN 0x00040000 /* PCS 1G autoneg to en */ +#define IXGBE_PCS1GLCTL_FLV_LINK_UP 1 +#define IXGBE_PCS1GLCTL_FORCE_LINK 0x20 +#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH 0x40 +#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000 +#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000 + /* SW Semaphore Register bitmasks */ #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ @@ -819,6 +1382,11 @@ #define IXGBE_FW_PTR 0x0F #define IXGBE_PBANUM0_PTR 0x15 #define IXGBE_PBANUM1_PTR 0x16 +#define IXGBE_PCIE_MSIX_82599_CAPS 0x72 +#define IXGBE_PCIE_MSIX_82598_CAPS 0x62 + +/* MSI-X capability fields masks */ +#define IXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF /* Legacy EEPROM word offsets */ #define IXGBE_ISCSI_BOOT_CAPS 0x0033 @@ -867,6 +1435,8 @@ #define IXGBE_PCI_LINK_SPEED 0xF #define IXGBE_PCI_LINK_SPEED_2500 0x1 #define IXGBE_PCI_LINK_SPEED_5000 0x2 +#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E +#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80 /* Number of 100 microseconds we wait for PCI Express master disable */ #define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800 @@ -919,6 +1489,7 @@ #define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */ #define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */ #define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */ +#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */ #define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */ #define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/ @@ -929,9 +1500,23 @@ /* Receive Priority Flow Control Enable */ #define IXGBE_FCTRL_RPFCE 0x00004000 #define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */ +#define IXGBE_MFLCN_PMCF 0x00000001 /* Pass MAC Control Frames */ +#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */ +#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */ +#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */ /* Multiple Receive Queue Control */ #define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */ +#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */ +#define IXGBE_MRQC_RT8TCEN 0x00000002 /* 8 TC no RSS */ +#define IXGBE_MRQC_RT4TCEN 0x00000003 /* 4 TC no RSS */ +#define IXGBE_MRQC_RTRSS8TCEN 0x00000004 /* 8 TC w/ RSS */ +#define IXGBE_MRQC_RTRSS4TCEN 0x00000005 /* 4 TC w/ RSS */ +#define IXGBE_MRQC_VMDQEN 0x00000008 /* VMDq2 64 pools no RSS */ +#define IXGBE_MRQC_VMDQRSS32EN 0x0000000A /* VMDq2 32 pools w/ RSS */ +#define IXGBE_MRQC_VMDQRSS64EN 0x0000000B /* VMDq2 64 pools w/ RSS */ +#define IXGBE_MRQC_VMDQRT8TCEN 0x0000000C /* VMDq2/RT 16 pool 8 TC */ +#define IXGBE_MRQC_VMDQRT4TCEN 0x0000000D /* VMDq2/RT 32 pool 4 TC */ #define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000 #define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 #define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000 @@ -942,6 +1527,12 @@ #define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 #define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 #define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000 +#define IXGBE_MRQC_L3L4TXSWEN 0x00008000 + +/* Queue Drop Enable */ +#define IXGBE_QDE_ENABLE 0x00000001 +#define IXGBE_QDE_IDX_MASK 0x00007F00 +#define IXGBE_QDE_IDX_SHIFT 8 #define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ #define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ @@ -953,10 +1544,25 @@ #define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ #define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */ +#define IXGBE_RXDADV_IPSEC_STATUS_SECP 0x00020000 +#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 +#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 +#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED 0x18000000 +#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 +/* Multiple Transmit Queue Command Register */ +#define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */ +#define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */ +#define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */ +#define IXGBE_MTQC_64VF 0x8 /* 2 TX Queues per pool w/64VF's */ +#define IXGBE_MTQC_8TC_8TQ 0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */ + /* Receive Descriptor bit definitions */ #define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */ #define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */ +#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */ #define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */ +#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004 #define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */ #define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ @@ -965,6 +1571,10 @@ #define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */ #define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ #define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define IXGBE_RXD_STAT_LLINT 0x800 /* Pkt caused Low Latency Interrupt */ +#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */ +#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */ +#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */ #define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ #define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */ #define IXGBE_RXD_ERR_LE 0x02 /* Length Error */ @@ -973,6 +1583,8 @@ #define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */ #define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */ #define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */ +#define IXGBE_RXDADV_ERR_MASK 0xfff00000 /* RDESC.ERRORS mask */ +#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */ #define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */ #define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */ #define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */ @@ -987,9 +1599,23 @@ #define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */ #define IXGBE_RXD_CFI_SHIFT 12 +#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */ +#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */ +#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */ +#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */ +#define IXGBE_RXDADV_STAT_MASK 0x000fffff /* Stat/NEXTP: bit 0-19 */ + +/* PSRTYPE bit definitions */ +#define IXGBE_PSRTYPE_TCPHDR 0x00000010 +#define IXGBE_PSRTYPE_UDPHDR 0x00000020 +#define IXGBE_PSRTYPE_IPV4HDR 0x00000100 +#define IXGBE_PSRTYPE_IPV6HDR 0x00000200 /* SRRCTL bit definitions */ #define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */ +#define IXGBE_SRRCTL_RDMTS_SHIFT 22 +#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000 +#define IXGBE_SRRCTL_DROP_EN 0x10000000 #define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F #define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00 #define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000 @@ -1004,6 +1630,7 @@ #define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F #define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0 +#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0 #define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0 #define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5 #define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000 @@ -1031,6 +1658,20 @@ #define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ #define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ #define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ +#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ +#define IXGBE_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ +#define IXGBE_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ +#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ +#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ + +/* Security Processing bit Indication */ +#define IXGBE_RXDADV_LNKSEC_STATUS_SECP 0x00020000 +#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 + /* Masks to determine if packets should be dropped due to frame errors */ #define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \ IXGBE_RXD_ERR_CE | \ @@ -1060,6 +1701,14 @@ #define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */ #define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT +/* Little Endian defines */ +#ifndef __le32 +#define __le32 u32 +#endif +#ifndef __le64 +#define __le64 u64 + +#endif /* Transmit Descriptor - Legacy */ struct ixgbe_legacy_tx_desc { @@ -1147,6 +1796,9 @@ struct ixgbe_adv_tx_context_desc { /* Adv Transmit Descriptor Config Masks */ #define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */ +#define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */ +#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */ +#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */ #define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */ #define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */ #define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ @@ -1181,6 +1833,9 @@ struct ixgbe_adv_tx_context_desc { #define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ #define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ #define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /*Req requires Markers and CRC*/ +#define IXGBE_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ +#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ +#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */ #define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ #define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ @@ -1194,6 +1849,12 @@ typedef u32 ixgbe_link_speed; #define IXGBE_LINK_SPEED_10GB_FULL 0x0080 #define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \ IXGBE_LINK_SPEED_10GB_FULL) +#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \ + IXGBE_LINK_SPEED_1GB_FULL | \ + IXGBE_LINK_SPEED_10GB_FULL) + +#define IXGBE_PCIE_DEV_CTRL_2 0xC8 +#define PCIE_COMPL_TO_VALUE 0x05 /* Physical layer type */ typedef u32 ixgbe_physical_layer; @@ -1210,7 +1871,6 @@ typedef u32 ixgbe_physical_layer; #define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200 #define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400 - enum ixgbe_eeprom_type { ixgbe_eeprom_uninitialized = 0, ixgbe_eeprom_spi, @@ -1220,12 +1880,14 @@ enum ixgbe_eeprom_type { enum ixgbe_mac_type { ixgbe_mac_unknown = 0, ixgbe_mac_82598EB, + ixgbe_mac_82599EB, ixgbe_num_macs }; enum ixgbe_phy_type { ixgbe_phy_unknown = 0, ixgbe_phy_tn, + ixgbe_phy_cu_unknown, ixgbe_phy_qt, ixgbe_phy_xaui, ixgbe_phy_nl, @@ -1234,22 +1896,31 @@ enum ixgbe_phy_type { ixgbe_phy_sfp_avago, ixgbe_phy_sfp_ftl, ixgbe_phy_sfp_unknown, + ixgbe_phy_sfp_intel, ixgbe_phy_generic }; /* * SFP+ module type IDs: * - * ID Module Type + * ID Module Type * ============= - * 0 SFP_DA_CU - * 1 SFP_SR - * 2 SFP_LR + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CU_CORE0 - 82599-specific + * 4 SFP_DA_CU_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific */ enum ixgbe_sfp_type { ixgbe_sfp_type_da_cu = 0, ixgbe_sfp_type_sr = 1, ixgbe_sfp_type_lr = 2, + ixgbe_sfp_type_da_cu_core0 = 3, + ixgbe_sfp_type_da_cu_core1 = 4, + ixgbe_sfp_type_srlr_core0 = 5, + ixgbe_sfp_type_srlr_core1 = 6, ixgbe_sfp_type_not_present = 0xFFFE, ixgbe_sfp_type_unknown = 0xFFFF }; @@ -1263,14 +1934,51 @@ enum ixgbe_media_type { }; /* Flow Control Settings */ -enum ixgbe_fc_type { +enum ixgbe_fc_mode { ixgbe_fc_none = 0, ixgbe_fc_rx_pause, ixgbe_fc_tx_pause, ixgbe_fc_full, +#ifdef CONFIG_DCB + ixgbe_fc_pfc, +#endif ixgbe_fc_default }; +/* PCI bus types */ +enum ixgbe_bus_type { + ixgbe_bus_type_unknown = 0, + ixgbe_bus_type_pci, + ixgbe_bus_type_pcix, + ixgbe_bus_type_pci_express, + ixgbe_bus_type_reserved +}; + +/* PCI bus speeds */ +enum ixgbe_bus_speed { + ixgbe_bus_speed_unknown = 0, + ixgbe_bus_speed_33, + ixgbe_bus_speed_66, + ixgbe_bus_speed_100, + ixgbe_bus_speed_120, + ixgbe_bus_speed_133, + ixgbe_bus_speed_2500, + ixgbe_bus_speed_5000, + ixgbe_bus_speed_reserved +}; + +/* PCI bus widths */ +enum ixgbe_bus_width { + ixgbe_bus_width_unknown = 0, + ixgbe_bus_width_pcie_x1, + ixgbe_bus_width_pcie_x2, + ixgbe_bus_width_pcie_x4 = 4, + ixgbe_bus_width_pcie_x8 = 8, + ixgbe_bus_width_32, + ixgbe_bus_width_64, + ixgbe_bus_width_reserved +}; + struct ixgbe_addr_filter_info { u32 num_mc_addrs; u32 rar_used_count; @@ -1280,6 +1988,16 @@ struct ixgbe_addr_filter_info { bool user_set_promisc; }; +/* Bus parameters */ +struct ixgbe_bus_info { + enum ixgbe_bus_speed speed; + enum ixgbe_bus_width width; + enum ixgbe_bus_type type; + + u16 func; + u16 lan_id; +}; + /* Flow control parameters */ struct ixgbe_fc_info { u32 high_water; /* Flow Control High-water */ @@ -1287,8 +2005,8 @@ struct ixgbe_fc_info { u16 pause_time; /* Flow Control Pause timer */ bool send_xon; /* Flow control send XON */ bool strict_ieee; /* Strict IEEE mode */ - enum ixgbe_fc_type type; /* Type of flow control */ - enum ixgbe_fc_type original_type; + enum ixgbe_fc_mode current_mode; /* FC mode in effect */ + enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */ }; /* Statistics counters collected by the MAC */ @@ -1348,6 +2066,14 @@ struct ixgbe_hw_stats { u64 qptc[16]; u64 qbrc[16]; u64 qbtc[16]; + u64 qprdc[16]; + u64 pxon2offc[8]; + u64 fdirustat_add; + u64 fdirustat_remove; + u64 fdirfstat_fadd; + u64 fdirfstat_fremove; + u64 fdirmatch; + u64 fdirmiss; }; /* forward declaration */ @@ -1372,12 +2098,15 @@ struct ixgbe_mac_operations { s32 (*start_hw)(struct ixgbe_hw *); s32 (*clear_hw_cntrs)(struct ixgbe_hw *); enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); - s32 (*get_supported_physical_layer)(struct ixgbe_hw *); + u32 (*get_supported_physical_layer)(struct ixgbe_hw *); s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *); s32 (*stop_adapter)(struct ixgbe_hw *); s32 (*get_bus_info)(struct ixgbe_hw *); + void (*set_lan_id)(struct ixgbe_hw *); s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*); s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8); + s32 (*setup_sfp)(struct ixgbe_hw *); + s32 (*enable_rx_dma)(struct ixgbe_hw *, u32); /* Link */ s32 (*setup_link)(struct ixgbe_hw *); @@ -1433,7 +2162,7 @@ struct ixgbe_phy_operations { struct ixgbe_eeprom_info { struct ixgbe_eeprom_operations ops; enum ixgbe_eeprom_type type; - u32 semaphore_delay; + u32 semaphore_delay; u16 word_size; u16 address_bits; }; @@ -1449,11 +2178,12 @@ struct ixgbe_mac_info { u32 num_rar_entries; u32 max_tx_queues; u32 max_rx_queues; - u32 link_attach_type; - u32 link_mode_select; - bool link_settings_loaded; + u32 max_msix_vectors; + u32 orig_autoc; + u32 orig_autoc2; + bool orig_link_settings_stored; bool autoneg; - bool autoneg_failed; + bool autoneg_succeeded; }; struct ixgbe_phy_info { @@ -1467,6 +2197,7 @@ struct ixgbe_phy_info { bool reset_disable; ixgbe_autoneg_advertised autoneg_advertised; bool autoneg_wait_to_complete; + bool multispeed_fiber; }; struct ixgbe_hw { @@ -1477,6 +2208,7 @@ struct ixgbe_hw { struct ixgbe_fc_info fc; struct ixgbe_phy_info phy; struct ixgbe_eeprom_info eeprom; + struct ixgbe_bus_info bus; u16 device_id; u16 vendor_id; u16 subsystem_device_id; @@ -1515,6 +2247,7 @@ struct ixgbe_info { #define IXGBE_ERR_I2C -18 #define IXGBE_ERR_SFP_NOT_SUPPORTED -19 #define IXGBE_ERR_SFP_NOT_PRESENT -20 +#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21 #define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF #endif /* _IXGBE_TYPE_H_ */ |