3 files changed, 23 insertions, 13 deletions

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0f7b6a3a2e6..2a978008fd6 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1830,7 +1830,6 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
 		break;
 	default:
 		wol->supported = 0;
-		retval = 0;
 	}
 
 	return retval;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 5588ef493a3..a3061aacffd 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2697,19 +2697,23 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 
 	/*
 	 * For hot-pluggable SFP+ devices, a new SFP+ module may have
-	 * arrived before interrupts were enabled.  We need to kick off
-	 * the SFP+ module setup first, then try to bring up link.
+	 * arrived before interrupts were enabled but after probe.  Such
+	 * devices wouldn't have their type identified yet. We need to
+	 * kick off the SFP+ module setup first, then try to bring up link.
 	 * If we're not hot-pluggable SFP+, we just need to configure link
 	 * and bring it up.
 	 */
-	err = hw->phy.ops.identify(hw);
-	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		dev_err(&adapter->pdev->dev, "failed to initialize because "
-			"an unsupported SFP+ module type was detected.\n"
-			"Reload the driver after installing a supported "
-			"module.\n");
-		ixgbe_down(adapter);
-		return err;
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		err = hw->phy.ops.identify(hw);
+		if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+			/*
+			 * Take the device down and schedule the sfp tasklet
+			 * which will unregister_netdev and log it.
+			 */
+			ixgbe_down(adapter);
+			schedule_work(&adapter->sfp_config_module_task);
+			return err;
+		}
 	}
 
 	if (ixgbe_is_sfp(hw)) {
@@ -3724,7 +3728,7 @@ static void ixgbe_sfp_task(struct work_struct *work)
 	if ((hw->phy.type == ixgbe_phy_nl) &&
 	    (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
 		s32 ret = hw->phy.ops.identify_sfp(hw);
-		if (ret)
+		if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
 			goto reschedule;
 		ret = hw->phy.ops.reset(hw);
 		if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
@@ -4534,13 +4538,17 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
 	u32 err;
 
 	adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+	/* Time for electrical oscillations to settle down */
+	msleep(100);
 	err = hw->phy.ops.identify_sfp(hw);
+
 	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
 		dev_err(&adapter->pdev->dev, "failed to initialize because "
 			"an unsupported SFP+ module type was detected.\n"
 			"Reload the driver after installing a supported "
 			"module.\n");
-		ixgbe_down(adapter);
+		unregister_netdev(adapter->netdev);
 		return;
 	}
 	hw->mac.ops.setup_sfp(hw);
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 453e966762f..9ecad17522c 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -60,6 +60,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 
 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+			hw->phy.mdio.prtad = phy_addr;
 			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
@@ -68,6 +69,8 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 				break;
 			}
 		}
+		/* clear value if nothing found */
+		hw->phy.mdio.prtad = 0;
 	} else {
 		status = 0;
 	}