diff options
Diffstat (limited to 'drivers/net/ixgbe')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 62 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 22 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 2 |
3 files changed, 62 insertions, 24 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index f894bb63304..d189ba7e8f1 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -39,6 +39,8 @@ #define IXGBE_82599_MC_TBL_SIZE 128 #define IXGBE_82599_VFT_TBL_SIZE 128 +void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -69,8 +71,14 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) if (hw->phy.multispeed_fiber) { /* Set up dual speed SFP+ support */ mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.disable_tx_laser = + &ixgbe_disable_tx_laser_multispeed_fiber; + mac->ops.enable_tx_laser = + &ixgbe_enable_tx_laser_multispeed_fiber; mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; } else { + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; mac->ops.flap_tx_laser = NULL; if ((mac->ops.get_media_type(hw) == ixgbe_media_type_backplane) && @@ -415,6 +423,44 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, return status; } + /** + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. + **/ +void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Disable tx laser; allow 100us to go dark per spec */ + esdp_reg |= IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + udelay(100); +} + +/** + * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively turning on the Tx + * laser on the PHY, effectively starting physical link. + **/ +void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Enable tx laser; allow 100ms to light up */ + esdp_reg &= ~IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + msleep(100); +} + /** * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser * @hw: pointer to hardware structure @@ -429,23 +475,11 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, **/ void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { - u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n"); if (hw->mac.autotry_restart) { - /* Disable tx laser; allow 100us to go dark per spec */ - esdp_reg |= IXGBE_ESDP_SDP3; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - udelay(100); - - /* Enable tx laser; allow 100ms to light up */ - esdp_reg &= ~IXGBE_ESDP_SDP3; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - msleep(100); - + ixgbe_disable_tx_laser_multispeed_fiber(hw); + ixgbe_enable_tx_laser_multispeed_fiber(hw); hw->mac.autotry_restart = false; } } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a98ff0e76e8..32781b3f896 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2991,6 +2991,10 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) else ixgbe_configure_msi_and_legacy(adapter); + /* enable the optics */ + if (hw->phy.multispeed_fiber) + hw->mac.ops.enable_tx_laser(hw); + clear_bit(__IXGBE_DOWN, &adapter->state); ixgbe_napi_enable_all(adapter); @@ -3252,6 +3256,10 @@ void ixgbe_down(struct ixgbe_adapter *adapter) /* signal that we are down to the interrupt handler */ set_bit(__IXGBE_DOWN, &adapter->state); + /* power down the optics */ + if (hw->phy.multispeed_fiber) + hw->mac.ops.disable_tx_laser(hw); + /* disable receive for all VFs and wait one second */ if (adapter->num_vfs) { /* ping all the active vfs to let them know we are going down */ @@ -6262,6 +6270,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, goto err_eeprom; } + /* power down the optics */ + if (hw->phy.multispeed_fiber) + hw->mac.ops.disable_tx_laser(hw); + init_timer(&adapter->watchdog_timer); adapter->watchdog_timer.function = &ixgbe_watchdog; adapter->watchdog_timer.data = (unsigned long)adapter; @@ -6409,16 +6421,6 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) del_timer_sync(&adapter->sfp_timer); cancel_work_sync(&adapter->watchdog_task); cancel_work_sync(&adapter->sfp_task); - if (adapter->hw.phy.multispeed_fiber) { - struct ixgbe_hw *hw = &adapter->hw; - /* - * Restart clause 37 autoneg, disable and re-enable - * the tx laser, to clear & alert the link partner - * that it needs to restart autotry - */ - hw->mac.autotry_restart = true; - hw->mac.ops.flap_tx_laser(hw); - } cancel_work_sync(&adapter->multispeed_fiber_task); cancel_work_sync(&adapter->sfp_config_module_task); if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index aed4ed66564..a0f9084c81c 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -2398,6 +2398,8 @@ struct ixgbe_mac_operations { s32 (*enable_rx_dma)(struct ixgbe_hw *, u32); /* Link */ + void (*disable_tx_laser)(struct ixgbe_hw *); + void (*enable_tx_laser)(struct ixgbe_hw *); void (*flap_tx_laser)(struct ixgbe_hw *); s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); |