diff options
Diffstat (limited to 'drivers/net/ixp2000/caleb.c')
| -rw-r--r-- | drivers/net/ixp2000/caleb.c | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ixp2000/caleb.c new file mode 100644 index 00000000000..d70530adb1e --- /dev/null +++ b/drivers/net/ixp2000/caleb.c @@ -0,0 +1,136 @@ +/* + * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <asm/io.h> + +#define CALEB_IDLO 0x00 +#define CALEB_IDHI 0x01 +#define CALEB_RID 0x02 +#define CALEB_RESET 0x03 +#define CALEB_INTREN0 0x04 +#define CALEB_INTREN1 0x05 +#define CALEB_INTRSTAT0 0x06 +#define CALEB_INTRSTAT1 0x07 +#define CALEB_PORTEN 0x08 +#define CALEB_BURST 0x09 +#define CALEB_PORTPAUS 0x0A +#define CALEB_PORTPAUSD 0x0B +#define CALEB_PHY0RX 0x10 +#define CALEB_PHY1RX 0x11 +#define CALEB_PHY0TX 0x12 +#define CALEB_PHY1TX 0x13 +#define CALEB_IXPRX_HI_CNTR 0x15 +#define CALEB_PHY0RX_HI_CNTR 0x16 +#define CALEB_PHY1RX_HI_CNTR 0x17 +#define CALEB_IXPRX_CNTR 0x18 +#define CALEB_PHY0RX_CNTR 0x19 +#define CALEB_PHY1RX_CNTR 0x1A +#define CALEB_IXPTX_CNTR 0x1B +#define CALEB_PHY0TX_CNTR 0x1C +#define CALEB_PHY1TX_CNTR 0x1D +#define CALEB_DEBUG0 0x1E +#define CALEB_DEBUG1 0x1F + + +static u8 caleb_reg_read(int reg) +{ + u8 value; + + value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)); + +// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value); + + return value; +} + +static void caleb_reg_write(int reg, u8 value) +{ + u8 dummy; + +// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value); + + *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value; + + dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE); + __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); +} + + +void caleb_reset(void) +{ + /* + * Perform a chip reset. + */ + caleb_reg_write(CALEB_RESET, 0x02); + udelay(1); + + /* + * Enable all interrupt sources. This is needed to get + * meaningful results out of the status bits (register 6 + * and 7.) + */ + caleb_reg_write(CALEB_INTREN0, 0xff); + caleb_reg_write(CALEB_INTREN1, 0x07); + + /* + * Set RX and TX FIFO thresholds to 1.5kb. + */ + caleb_reg_write(CALEB_PHY0RX, 0x11); + caleb_reg_write(CALEB_PHY1RX, 0x11); + caleb_reg_write(CALEB_PHY0TX, 0x11); + caleb_reg_write(CALEB_PHY1TX, 0x11); + + /* + * Program SPI-3 burst size. + */ + caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets +// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets +// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets +} + +void caleb_enable_rx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp |= 1 << port; + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_disable_rx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp &= ~(1 << port); + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_enable_tx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp |= 1 << (port + 4); + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_disable_tx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp &= ~(1 << (port + 4)); + caleb_reg_write(CALEB_PORTEN, temp); +} |