diff options
Diffstat (limited to 'drivers/net/myri10ge')
| -rw-r--r-- | drivers/net/myri10ge/myri10ge.c | 121 |
1 files changed, 68 insertions, 53 deletions
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 3245357a06f..f53b0dad65a 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -714,14 +714,78 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic) mgp->dev->name); } -static int myri10ge_reset(struct myri10ge_priv *mgp) +static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type) { struct myri10ge_cmd cmd; int status; - size_t bytes; u32 len; struct page *dmatest_page; dma_addr_t dmatest_bus; + char *test = " "; + + dmatest_page = alloc_page(GFP_KERNEL); + if (!dmatest_page) + return -ENOMEM; + dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE, + DMA_BIDIRECTIONAL); + + /* Run a small DMA test. + * The magic multipliers to the length tell the firmware + * to do DMA read, write, or read+write tests. The + * results are returned in cmd.data0. The upper 16 + * bits or the return is the number of transfers completed. + * The lower 16 bits is the time in 0.5us ticks that the + * transfers took to complete. + */ + + len = mgp->tx.boundary; + + cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); + cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); + cmd.data2 = len * 0x10000; + status = myri10ge_send_cmd(mgp, test_type, &cmd, 0); + if (status != 0) { + test = "read"; + goto abort; + } + mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff); + cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); + cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); + cmd.data2 = len * 0x1; + status = myri10ge_send_cmd(mgp, test_type, &cmd, 0); + if (status != 0) { + test = "write"; + goto abort; + } + mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff); + + cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); + cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); + cmd.data2 = len * 0x10001; + status = myri10ge_send_cmd(mgp, test_type, &cmd, 0); + if (status != 0) { + test = "read/write"; + goto abort; + } + mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) / + (cmd.data0 & 0xffff); + +abort: + pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL); + put_page(dmatest_page); + + if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST) + dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n", + test, status); + + return status; +} + +static int myri10ge_reset(struct myri10ge_priv *mgp) +{ + struct myri10ge_cmd cmd; + int status; + size_t bytes; /* try to send a reset command to the card to see if it * is alive */ @@ -731,11 +795,8 @@ static int myri10ge_reset(struct myri10ge_priv *mgp) dev_err(&mgp->pdev->dev, "failed reset\n"); return -ENXIO; } - dmatest_page = alloc_page(GFP_KERNEL); - if (!dmatest_page) - return -ENOMEM; - dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE, - DMA_BIDIRECTIONAL); + + (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST); /* Now exchange information about interrupts */ @@ -763,52 +824,6 @@ static int myri10ge_reset(struct myri10ge_priv *mgp) } put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr); - /* Run a small DMA test. - * The magic multipliers to the length tell the firmware - * to do DMA read, write, or read+write tests. The - * results are returned in cmd.data0. The upper 16 - * bits or the return is the number of transfers completed. - * The lower 16 bits is the time in 0.5us ticks that the - * transfers took to complete. - */ - - len = mgp->tx.boundary; - - cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); - cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); - cmd.data2 = len * 0x10000; - status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0); - if (status == 0) - mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / - (cmd.data0 & 0xffff); - else - dev_warn(&mgp->pdev->dev, "DMA read benchmark failed: %d\n", - status); - cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); - cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); - cmd.data2 = len * 0x1; - status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0); - if (status == 0) - mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / - (cmd.data0 & 0xffff); - else - dev_warn(&mgp->pdev->dev, "DMA write benchmark failed: %d\n", - status); - - cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); - cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); - cmd.data2 = len * 0x10001; - status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0); - if (status == 0) - mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) / - (cmd.data0 & 0xffff); - else - dev_warn(&mgp->pdev->dev, - "DMA read/write benchmark failed: %d\n", status); - - pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL); - put_page(dmatest_page); - memset(mgp->rx_done.entry, 0, bytes); /* reset mcp/driver shared state back to 0 */ |