summaryrefslogtreecommitdiffstats
path: root/drivers/net/netxen/netxen_nic_hw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/netxen/netxen_nic_hw.c')
-rw-r--r--drivers/net/netxen/netxen_nic_hw.c77
1 files changed, 42 insertions, 35 deletions
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index d0c6935881e..4259f3fb899 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -285,14 +285,7 @@ static unsigned crb_hub_agt[64] =
#define ADDR_IN_RANGE(addr, low, high) \
(((addr) <= (high)) && ((addr) >= (low)))
-#define NETXEN_MAX_MTU 8000 + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE
-#define NETXEN_MIN_MTU 64
-#define NETXEN_ETH_FCS_SIZE 4
-#define NETXEN_ENET_HEADER_SIZE 14
#define NETXEN_WINDOW_ONE 0x2000000 /*CRB Window: bit 25 of CRB address */
-#define NETXEN_FIRMWARE_LEN ((16 * 1024) / 4)
-#define NETXEN_NIU_HDRSIZE (0x1 << 6)
-#define NETXEN_NIU_TLRSIZE (0x1 << 5)
#define NETXEN_NIC_ZERO_PAUSE_ADDR 0ULL
#define NETXEN_NIC_UNIT_PAUSE_ADDR 0x200ULL
@@ -541,9 +534,6 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
return 0;
}
-#define NIC_REQUEST 0x14
-#define NETXEN_MAC_EVENT 0x1
-
static int nx_p3_sre_macaddr_change(struct net_device *dev,
u8 *addr, unsigned op)
{
@@ -553,8 +543,8 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev,
int rv;
memset(&req, 0, sizeof(nx_nic_req_t));
- req.qhdr |= (NIC_REQUEST << 23);
- req.req_hdr |= NETXEN_MAC_EVENT;
+ req.qhdr |= (NX_NIC_REQUEST << 23);
+ req.req_hdr |= NX_MAC_EVENT;
req.req_hdr |= ((u64)adapter->portnum << 16);
mac_req.op = op;
memcpy(&mac_req.mac_addr, addr, 6);
@@ -575,31 +565,35 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;
struct dev_mc_list *mc_ptr;
u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
- adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE);
-
- /*
- * Programming mac addresses will automaticly enabling L2 filtering.
- * HW will replace timestamp with L2 conid when L2 filtering is
- * enabled. This causes problem for LSA. Do not enabling L2 filtering
- * until that problem is fixed.
- */
- if ((netdev->flags & IFF_PROMISC) ||
- (netdev->mc_count > adapter->max_mc_count))
- return;
+ u32 mode = VPORT_MISS_MODE_DROP;
del_list = adapter->mac_list;
adapter->mac_list = NULL;
nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);
+ nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
+
+ if (netdev->flags & IFF_PROMISC) {
+ mode = VPORT_MISS_MODE_ACCEPT_ALL;
+ goto send_fw_cmd;
+ }
+
+ if ((netdev->flags & IFF_ALLMULTI) ||
+ (netdev->mc_count > adapter->max_mc_count)) {
+ mode = VPORT_MISS_MODE_ACCEPT_MULTI;
+ goto send_fw_cmd;
+ }
+
if (netdev->mc_count > 0) {
- nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
for (mc_ptr = netdev->mc_list; mc_ptr;
mc_ptr = mc_ptr->next) {
nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,
&add_list, &del_list);
}
}
+
+send_fw_cmd:
+ adapter->set_promisc(adapter, mode);
for (cur = del_list; cur;) {
nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);
next = cur->next;
@@ -615,6 +609,21 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
}
}
+int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
+{
+ nx_nic_req_t req;
+
+ memset(&req, 0, sizeof(nx_nic_req_t));
+
+ req.qhdr |= (NX_HOST_REQUEST << 23);
+ req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
+ req.req_hdr |= ((u64)adapter->portnum << 16);
+ req.words[0] = cpu_to_le64(mode);
+
+ return netxen_send_cmd_descs(adapter,
+ (struct cmd_desc_type0 *)&req, 1);
+}
+
#define NETXEN_CONFIG_INTR_COALESCE 3
/*
@@ -627,7 +636,7 @@ int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
memset(&req, 0, sizeof(nx_nic_req_t));
- req.qhdr |= (NIC_REQUEST << 23);
+ req.qhdr |= (NX_NIC_REQUEST << 23);
req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
req.req_hdr |= ((u64)adapter->portnum << 16);
@@ -653,6 +662,7 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
{
struct netxen_adapter *adapter = netdev_priv(netdev);
int max_mtu;
+ int rc = 0;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
max_mtu = P3_MAX_MTU;
@@ -666,16 +676,12 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
}
if (adapter->set_mtu)
- adapter->set_mtu(adapter, mtu);
- netdev->mtu = mtu;
+ rc = adapter->set_mtu(adapter, mtu);
- mtu += MTU_FUDGE_FACTOR;
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
- nx_fw_cmd_set_mtu(adapter, mtu);
- else if (adapter->set_mtu)
- adapter->set_mtu(adapter, mtu);
+ if (!rc)
+ netdev->mtu = mtu;
- return 0;
+ return rc;
}
int netxen_is_flash_supported(struct netxen_adapter *adapter)
@@ -2047,6 +2053,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
{
+ new_mtu += MTU_FUDGE_FACTOR;
netxen_nic_write_w0(adapter,
NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
new_mtu);
@@ -2055,7 +2062,7 @@ int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
{
- new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE;
+ new_mtu += MTU_FUDGE_FACTOR;
if (adapter->physical_port == 0)
netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
new_mtu);