diff options
Diffstat (limited to 'drivers/net/netxen/netxen_nic_main.c')
| -rw-r--r-- | drivers/net/netxen/netxen_nic_main.c | 1161 |
1 files changed, 1161 insertions, 0 deletions
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c new file mode 100644 index 00000000000..8a5792fea77 --- /dev/null +++ b/drivers/net/netxen/netxen_nic_main.c @@ -0,0 +1,1161 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + * + * + * Main source file for NetXen NIC Driver on Linux + * + */ + +#include <linux/vmalloc.h> +#include <linux/highmem.h> +#include "netxen_nic_hw.h" + +#include "netxen_nic.h" +#define DEFINE_GLOBAL_RECV_CRB +#include "netxen_nic_phan_reg.h" + +#include <linux/dma-mapping.h> +#include <linux/vmalloc.h> + +#define PHAN_VENDOR_ID 0x4040 + +MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID); + +char netxen_nic_driver_name[] = "netxen-nic"; +static char netxen_nic_driver_string[] = "NetXen Network Driver version " + NETXEN_NIC_LINUX_VERSIONID; + +#define NETXEN_NETDEV_WEIGHT 120 +#define NETXEN_ADAPTER_UP_MAGIC 777 +#define NETXEN_NIC_PEG_TUNE 0 + +u8 nx_p2_id = NX_P2_C0; + +#define DMA_32BIT_MASK 0x00000000ffffffffULL +#define DMA_35BIT_MASK 0x00000007ffffffffULL + +/* Local functions to NetXen NIC driver */ +static int __devinit netxen_nic_probe(struct pci_dev *pdev, + const struct pci_device_id *ent); +static void __devexit netxen_nic_remove(struct pci_dev *pdev); +static int netxen_nic_open(struct net_device *netdev); +static int netxen_nic_close(struct net_device *netdev); +static int netxen_nic_xmit_frame(struct sk_buff *, struct net_device *); +static void netxen_tx_timeout(struct net_device *netdev); +static void netxen_tx_timeout_task(struct work_struct *work); +static void netxen_watchdog(unsigned long); +static int netxen_handle_int(struct netxen_adapter *, struct net_device *); +static int netxen_nic_poll(struct net_device *dev, int *budget); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void netxen_nic_poll_controller(struct net_device *netdev); +#endif +static irqreturn_t netxen_intr(int irq, void *data); + +/* PCI Device ID Table */ +static struct pci_device_id netxen_pci_tbl[] __devinitdata = { + {PCI_DEVICE(0x4040, 0x0001)}, + {PCI_DEVICE(0x4040, 0x0002)}, + {PCI_DEVICE(0x4040, 0x0003)}, + {PCI_DEVICE(0x4040, 0x0004)}, + {PCI_DEVICE(0x4040, 0x0005)}, + {PCI_DEVICE(0x4040, 0x0024)}, + {PCI_DEVICE(0x4040, 0x0025)}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, netxen_pci_tbl); + +struct workqueue_struct *netxen_workq; +static void netxen_watchdog(unsigned long); + +/* + * netxen_nic_probe() + * + * The Linux system will invoke this after identifying the vendor ID and + * device Id in the pci_tbl supported by this module. + * + * A quad port card has one operational PCI config space, (function 0), + * which is used to access all four ports. + * + * This routine will initialize the adapter, and setup the global parameters + * along with the port's specific structure. + */ +static int __devinit +netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *netdev = NULL; + struct netxen_adapter *adapter = NULL; + struct netxen_port *port = NULL; + void __iomem *mem_ptr0 = NULL; + void __iomem *mem_ptr1 = NULL; + void __iomem *mem_ptr2 = NULL; + + u8 *db_ptr = NULL; + unsigned long mem_base, mem_len, db_base, db_len; + int pci_using_dac, i, err; + int ring; + struct netxen_recv_context *recv_ctx = NULL; + struct netxen_rcv_desc_ctx *rcv_desc = NULL; + struct netxen_cmd_buffer *cmd_buf_arr = NULL; + u64 mac_addr[FLASH_NUM_PORTS + 1]; + int valid_mac = 0; + + printk(KERN_INFO "%s \n", netxen_nic_driver_string); + /* In current scheme, we use only PCI function 0 */ + if (PCI_FUNC(pdev->devfn) != 0) { + DPRINTK(ERR, "NetXen function %d will not be enabled.\n", + PCI_FUNC(pdev->devfn)); + return -ENODEV; + } + if ((err = pci_enable_device(pdev))) + return err; + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + err = -ENODEV; + goto err_out_disable_pdev; + } + + if ((err = pci_request_regions(pdev, netxen_nic_driver_name))) + goto err_out_disable_pdev; + + pci_set_master(pdev); + pci_read_config_byte(pdev, PCI_REVISION_ID, &nx_p2_id); + if (nx_p2_id == NX_P2_C1 && + (pci_set_dma_mask(pdev, DMA_35BIT_MASK) == 0) && + (pci_set_consistent_dma_mask(pdev, DMA_35BIT_MASK) == 0)) { + pci_using_dac = 1; + } else { + if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) || + (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) + goto err_out_free_res; + + pci_using_dac = 0; + } + + /* remap phys address */ + mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */ + mem_len = pci_resource_len(pdev, 0); + + /* 128 Meg of memory */ + mem_ptr0 = ioremap(mem_base, FIRST_PAGE_GROUP_SIZE); + mem_ptr1 = + ioremap(mem_base + SECOND_PAGE_GROUP_START, SECOND_PAGE_GROUP_SIZE); + mem_ptr2 = + ioremap(mem_base + THIRD_PAGE_GROUP_START, THIRD_PAGE_GROUP_SIZE); + + if ((mem_ptr0 == 0UL) || (mem_ptr1 == 0UL) || (mem_ptr2 == 0UL)) { + DPRINTK(ERR, + "Cannot remap adapter memory aborting.:" + "0 -> %p, 1 -> %p, 2 -> %p\n", + mem_ptr0, mem_ptr1, mem_ptr2); + + err = -EIO; + goto err_out_iounmap; + } + db_base = pci_resource_start(pdev, 4); /* doorbell is on bar 4 */ + db_len = pci_resource_len(pdev, 4); + + if (db_len == 0) { + printk(KERN_ERR "%s: doorbell is disabled\n", + netxen_nic_driver_name); + err = -EIO; + goto err_out_iounmap; + } + DPRINTK(INFO, "doorbell ioremap from %lx a size of %lx\n", db_base, + db_len); + + db_ptr = ioremap(db_base, NETXEN_DB_MAPSIZE_BYTES); + if (db_ptr == 0UL) { + printk(KERN_ERR "%s: Failed to allocate doorbell map.", + netxen_nic_driver_name); + err = -EIO; + goto err_out_iounmap; + } + DPRINTK(INFO, "doorbell ioremaped at %p\n", db_ptr); + +/* + * Allocate a adapter structure which will manage all the initialization + * as well as the common resources for all ports... + * all the ports will have pointer to this adapter as well as Adapter + * will have pointers of all the ports structures. + */ + + /* One adapter structure for all 4 ports.... */ + adapter = kzalloc(sizeof(struct netxen_adapter), GFP_KERNEL); + if (adapter == NULL) { + printk(KERN_ERR "%s: Could not allocate adapter memory:%d\n", + netxen_nic_driver_name, + (int)sizeof(struct netxen_adapter)); + err = -ENOMEM; + goto err_out_dbunmap; + } + + adapter->max_tx_desc_count = MAX_CMD_DESCRIPTORS; + adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS; + adapter->max_jumbo_rx_desc_count = MAX_JUMBO_RCV_DESCRIPTORS; + adapter->max_lro_rx_desc_count = MAX_LRO_RCV_DESCRIPTORS; + + pci_set_drvdata(pdev, adapter); + + cmd_buf_arr = (struct netxen_cmd_buffer *)vmalloc(TX_RINGSIZE); + if (cmd_buf_arr == NULL) { + printk(KERN_ERR + "%s: Could not allocate cmd_buf_arr memory:%d\n", + netxen_nic_driver_name, (int)TX_RINGSIZE); + err = -ENOMEM; + goto err_out_free_adapter; + } + memset(cmd_buf_arr, 0, TX_RINGSIZE); + + for (i = 0; i < MAX_RCV_CTX; ++i) { + recv_ctx = &adapter->recv_ctx[i]; + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + switch (RCV_DESC_TYPE(ring)) { + case RCV_DESC_NORMAL: + rcv_desc->max_rx_desc_count = + adapter->max_rx_desc_count; + rcv_desc->flags = RCV_DESC_NORMAL; + rcv_desc->dma_size = RX_DMA_MAP_LEN; + rcv_desc->skb_size = MAX_RX_BUFFER_LENGTH; + break; + + case RCV_DESC_JUMBO: + rcv_desc->max_rx_desc_count = + adapter->max_jumbo_rx_desc_count; + rcv_desc->flags = RCV_DESC_JUMBO; + rcv_desc->dma_size = RX_JUMBO_DMA_MAP_LEN; + rcv_desc->skb_size = MAX_RX_JUMBO_BUFFER_LENGTH; + break; + + case RCV_RING_LRO: + rcv_desc->max_rx_desc_count = + adapter->max_lro_rx_desc_count; + rcv_desc->flags = RCV_DESC_LRO; + rcv_desc->dma_size = RX_LRO_DMA_MAP_LEN; + rcv_desc->skb_size = MAX_RX_LRO_BUFFER_LENGTH; + break; + + } + rcv_desc->rx_buf_arr = (struct netxen_rx_buffer *) + vmalloc(RCV_BUFFSIZE); + + if (rcv_desc->rx_buf_arr == NULL) { + printk(KERN_ERR "%s: Could not allocate" + "rcv_desc->rx_buf_arr memory:%d\n", + netxen_nic_driver_name, + (int)RCV_BUFFSIZE); + err = -ENOMEM; + goto err_out_free_rx_buffer; + } + memset(rcv_desc->rx_buf_arr, 0, RCV_BUFFSIZE); + } + + } + + adapter->cmd_buf_arr = cmd_buf_arr; + adapter->ahw.pci_base0 = mem_ptr0; + adapter->ahw.pci_base1 = mem_ptr1; + adapter->ahw.pci_base2 = mem_ptr2; + adapter->ahw.db_base = db_ptr; + adapter->ahw.db_len = db_len; + spin_lock_init(&adapter->tx_lock); + spin_lock_init(&adapter->lock); + netxen_initialize_adapter_sw(adapter); /* initialize the buffers in adapter */ +#ifdef CONFIG_IA64 + netxen_pinit_from_rom(adapter, 0); + udelay(500); + netxen_load_firmware(adapter); +#endif + + /* + * Set the CRB window to invalid. If any register in window 0 is + * accessed it should set the window to 0 and then reset it to 1. + */ + adapter->curr_window = 255; + /* + * Adapter in our case is quad port so initialize it before + * initializing the ports + */ + netxen_initialize_adapter_hw(adapter); /* initialize the adapter */ + + netxen_initialize_adapter_ops(adapter); + + init_timer(&adapter->watchdog_timer); + adapter->ahw.xg_linkup = 0; + adapter->watchdog_timer.function = &netxen_watchdog; + adapter->watchdog_timer.data = (unsigned long)adapter; + INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task); + adapter->ahw.pdev = pdev; + adapter->proc_cmd_buf_counter = 0; + adapter->ahw.revision_id = nx_p2_id; + + if (pci_enable_msi(pdev)) { + adapter->flags &= ~NETXEN_NIC_MSI_ENABLED; + printk(KERN_WARNING "%s: unable to allocate MSI interrupt" + " error\n", netxen_nic_driver_name); + } else + adapter->flags |= NETXEN_NIC_MSI_ENABLED; + + if (netxen_is_flash_supported(adapter) == 0 && + netxen_get_flash_mac_addr(adapter, mac_addr) == 0) + valid_mac = 1; + else + valid_mac = 0; + + /* + * Initialize all the CRB registers here. + */ + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_PRODUCER_OFFSET)); + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_CONSUMER_OFFSET)); + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_CMD_ADDR_LO)); + + /* do this before waking up pegs so that we have valid dummy dma addr */ + err = netxen_initialize_adapter_offload(adapter); + if (err) { + goto err_out_free_dev; + } + + /* Unlock the HW, prompting the boot sequence */ + writel(1, + NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE)); + + /* Handshake with the card before we register the devices. */ + netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); + + /* initialize the all the ports */ + adapter->active_ports = 0; + + for (i = 0; i < adapter->ahw.max_ports; i++) { + netdev = alloc_etherdev(sizeof(struct netxen_port)); + if (!netdev) { + printk(KERN_ERR "%s: could not allocate netdev for port" + " %d\n", netxen_nic_driver_name, i + 1); + goto err_out_free_dev; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + port = netdev_priv(netdev); + port->netdev = netdev; + port->pdev = pdev; + port->adapter = adapter; + port->portnum = i; /* Gigabit port number from 0-3 */ + + netdev->open = netxen_nic_open; + netdev->stop = netxen_nic_close; + netdev->hard_start_xmit = netxen_nic_xmit_frame; + netdev->get_stats = netxen_nic_get_stats; + netdev->set_multicast_list = netxen_nic_set_multi; + netdev->set_mac_address = netxen_nic_set_mac; + netdev->change_mtu = netxen_nic_change_mtu; + netdev->tx_timeout = netxen_tx_timeout; + netdev->watchdog_timeo = HZ; + + SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops); + netdev->poll = netxen_nic_poll; + netdev->weight = NETXEN_NETDEV_WEIGHT; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = netxen_nic_poll_controller; +#endif + /* ScatterGather support */ + netdev->features = NETIF_F_SG; + netdev->features |= NETIF_F_IP_CSUM; + netdev->features |= NETIF_F_TSO; + + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + if (valid_mac) { + unsigned char *p = (unsigned char *)&mac_addr[i]; + netdev->dev_addr[0] = *(p + 5); + netdev->dev_addr[1] = *(p + 4); + netdev->dev_addr[2] = *(p + 3); + netdev->dev_addr[3] = *(p + 2); + netdev->dev_addr[4] = *(p + 1); + netdev->dev_addr[5] = *(p + 0); + + memcpy(netdev->perm_addr, netdev->dev_addr, + netdev->addr_len); + if (!is_valid_ether_addr(netdev->perm_addr)) { + printk(KERN_ERR "%s: Bad MAC address " + "%02x:%02x:%02x:%02x:%02x:%02x.\n", + netxen_nic_driver_name, + netdev->dev_addr[0], + netdev->dev_addr[1], + netdev->dev_addr[2], + netdev->dev_addr[3], + netdev->dev_addr[4], + netdev->dev_addr[5]); + } else { + if (adapter->macaddr_set) + adapter->macaddr_set(port, + netdev->dev_addr); + } + } + INIT_WORK(&port->tx_timeout_task, netxen_tx_timeout_task); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + if ((err = register_netdev(netdev))) { + printk(KERN_ERR "%s: register_netdev failed port #%d" + " aborting\n", netxen_nic_driver_name, i + 1); + err = -EIO; + free_netdev(netdev); + goto err_out_free_dev; + } + adapter->port_count++; + adapter->port[i] = port; + } + + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); + netxen_pinit_from_rom(adapter, 0); + udelay(500); + netxen_load_firmware(adapter); + netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); + /* + * delay a while to ensure that the Pegs are up & running. + * Otherwise, we might see some flaky behaviour. + */ + udelay(100); + + switch (adapter->ahw.board_type) { + case NETXEN_NIC_GBE: + printk("%s: QUAD GbE board initialized\n", + netxen_nic_driver_name); + break; + + case NETXEN_NIC_XGBE: + printk("%s: XGbE board initialized\n", netxen_nic_driver_name); + break; + } + + adapter->driver_mismatch = 0; + + return 0; + + err_out_free_dev: + if (adapter->flags & NETXEN_NIC_MSI_ENABLED) + pci_disable_msi(pdev); + for (i = 0; i < adapter->port_count; i++) { + port = adapter->port[i]; + if ((port) && (port->netdev)) { + unregister_netdev(port->netdev); + free_netdev(port->netdev); + } + } + + netxen_free_adapter_offload(adapter); + + err_out_free_rx_buffer: + for (i = 0; i < MAX_RCV_CTX; ++i) { + recv_ctx = &adapter->recv_ctx[i]; + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + if (rcv_desc->rx_buf_arr != NULL) { + vfree(rcv_desc->rx_buf_arr); + rcv_desc->rx_buf_arr = NULL; + } + } + } + vfree(cmd_buf_arr); + + err_out_free_adapter: + pci_set_drvdata(pdev, NULL); + kfree(adapter); + + err_out_dbunmap: + if (db_ptr) + iounmap(db_ptr); + + err_out_iounmap: + if (mem_ptr0) + iounmap(mem_ptr0); + if (mem_ptr1) + iounmap(mem_ptr1); + if (mem_ptr2) + iounmap(mem_ptr2); + + err_out_free_res: + pci_release_regions(pdev); + err_out_disable_pdev: + pci_disable_device(pdev); + return err; +} + +static void __devexit netxen_nic_remove(struct pci_dev *pdev) +{ + struct netxen_adapter *adapter; + struct netxen_port *port; + struct netxen_rx_buffer *buffer; + struct netxen_recv_context *recv_ctx; + struct netxen_rcv_desc_ctx *rcv_desc; + int i; + int ctxid, ring; + + adapter = pci_get_drvdata(pdev); + if (adapter == NULL) + return; + + netxen_nic_stop_all_ports(adapter); + /* leave the hw in the same state as reboot */ + netxen_pinit_from_rom(adapter, 0); + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); + netxen_load_firmware(adapter); + netxen_free_adapter_offload(adapter); + + udelay(500); /* Delay for a while to drain the DMA engines */ + for (i = 0; i < adapter->port_count; i++) { + port = adapter->port[i]; + if ((port) && (port->netdev)) { + unregister_netdev(port->netdev); + free_netdev(port->netdev); + } + } + + if ((adapter->flags & NETXEN_NIC_MSI_ENABLED)) + pci_disable_msi(pdev); + pci_set_drvdata(pdev, NULL); + if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) + netxen_free_hw_resources(adapter); + + iounmap(adapter->ahw.db_base); + iounmap(adapter->ahw.pci_base0); + iounmap(adapter->ahw.pci_base1); + iounmap(adapter->ahw.pci_base2); + + pci_release_regions(pdev); + pci_disable_device(pdev); + + for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) { + recv_ctx = &adapter->recv_ctx[ctxid]; + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + for (i = 0; i < rcv_desc->max_rx_desc_count; ++i) { + buffer = &(rcv_desc->rx_buf_arr[i]); + if (buffer->state == NETXEN_BUFFER_FREE) + continue; + pci_unmap_single(pdev, buffer->dma, + rcv_desc->dma_size, + PCI_DMA_FROMDEVICE); + if (buffer->skb != NULL) + dev_kfree_skb_any(buffer->skb); + } + vfree(rcv_desc->rx_buf_arr); + } + } + + vfree(adapter->cmd_buf_arr); + kfree(adapter); +} + +/* + * Called when a network interface is made active + * @returns 0 on success, negative value on failure + */ +static int netxen_nic_open(struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + int err = 0; + int ctx, ring; + + if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) { + err = netxen_init_firmware(adapter); + if (err != 0) { + printk(KERN_ERR "Failed to init firmware\n"); + return -EIO; + } + netxen_nic_flash_print(adapter); + if (adapter->init_niu) + adapter->init_niu(adapter); + + /* setup all the resources for the Phantom... */ + /* this include the descriptors for rcv, tx, and status */ + netxen_nic_clear_stats(adapter); + err = netxen_nic_hw_resources(adapter); + if (err) { + printk(KERN_ERR "Error in setting hw resources:%d\n", + err); + return err; + } + if (adapter->init_port + && adapter->init_port(adapter, port->portnum) != 0) { + printk(KERN_ERR "%s: Failed to initialize port %d\n", + netxen_nic_driver_name, port->portnum); + netxen_free_hw_resources(adapter); + return -EIO; + } + for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) + netxen_post_rx_buffers(adapter, ctx, ring); + } + adapter->irq = adapter->ahw.pdev->irq; + err = request_irq(adapter->ahw.pdev->irq, &netxen_intr, + SA_SHIRQ | SA_SAMPLE_RANDOM, netdev->name, + adapter); + if (err) { + printk(KERN_ERR "request_irq failed with: %d\n", err); + netxen_free_hw_resources(adapter); + return err; + } + + adapter->is_up = NETXEN_ADAPTER_UP_MAGIC; + } + adapter->active_ports++; + if (adapter->active_ports == 1) { + if (!adapter->driver_mismatch) + mod_timer(&adapter->watchdog_timer, jiffies); + + netxen_nic_enable_int(adapter); + } + + /* Done here again so that even if phantom sw overwrote it, + * we set it */ + if (adapter->macaddr_set) + adapter->macaddr_set(port, netdev->dev_addr); + netxen_nic_set_link_parameters(port); + + netxen_nic_set_multi(netdev); + if (adapter->set_mtu) + adapter->set_mtu(port, netdev->mtu); + + if (!adapter->driver_mismatch) + netif_start_queue(netdev); + + return 0; +} + +/* + * netxen_nic_close - Disables a network interface entry point + */ +static int netxen_nic_close(struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + int i, j; + struct netxen_cmd_buffer *cmd_buff; + struct netxen_skb_frag *buffrag; + + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + adapter->active_ports--; + + if (!adapter->active_ports) { + netxen_nic_disable_int(adapter); + if (adapter->irq) + free_irq(adapter->irq, adapter); + cmd_buff = adapter->cmd_buf_arr; + for (i = 0; i < adapter->max_tx_desc_count; i++) { + buffrag = cmd_buff->frag_array; + if (buffrag->dma) { + pci_unmap_single(port->pdev, buffrag->dma, + buffrag->length, + PCI_DMA_TODEVICE); + buffrag->dma = (u64) NULL; + } + for (j = 0; j < cmd_buff->frag_count; j++) { + buffrag++; + if (buffrag->dma) { + pci_unmap_page(port->pdev, + buffrag->dma, + buffrag->length, + PCI_DMA_TODEVICE); + buffrag->dma = (u64) NULL; + } + } + /* Free the skb we received in netxen_nic_xmit_frame */ + if (cmd_buff->skb) { + dev_kfree_skb_any(cmd_buff->skb); + cmd_buff->skb = NULL; + } + cmd_buff++; + } + FLUSH_SCHEDULED_WORK(); + del_timer_sync(&adapter->watchdog_timer); + } + + return 0; +} + +static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + struct netxen_hardware_context *hw = &adapter->ahw; + unsigned int first_seg_len = skb->len - skb->data_len; + struct netxen_skb_frag *buffrag; + unsigned int i; + + u32 producer = 0; + u32 saved_producer = 0; + struct cmd_desc_type0 *hwdesc; + int k; + struct netxen_cmd_buffer *pbuf = NULL; + static int dropped_packet = 0; + int frag_count; + u32 local_producer = 0; + u32 max_tx_desc_count = 0; + u32 last_cmd_consumer = 0; + int no_of_desc; + + port->stats.xmitcalled++; + frag_count = skb_shinfo(skb)->nr_frags + 1; + + if (unlikely(skb->len <= 0)) { + dev_kfree_skb_any(skb); + port->stats.badskblen++; + return NETDEV_TX_OK; + } + + if (frag_count > MAX_BUFFERS_PER_CMD) { + printk("%s: %s netxen_nic_xmit_frame: frag_count (%d)" + "too large, can handle only %d frags\n", + netxen_nic_driver_name, netdev->name, + frag_count, MAX_BUFFERS_PER_CMD); + port->stats.txdropped++; + if ((++dropped_packet & 0xff) == 0xff) + printk("%s: %s droppped packets = %d\n", + netxen_nic_driver_name, netdev->name, + dropped_packet); + + return NETDEV_TX_OK; + } + + /* + * Everything is set up. Now, we just need to transmit it out. + * Note that we have to copy the contents of buffer over to + * right place. Later on, this can be optimized out by de-coupling the + * producer index from the buffer index. + */ + retry_getting_window: + spin_lock_bh(&adapter->tx_lock); + if (adapter->total_threads == MAX_XMIT_PRODUCERS) { + spin_unlock_bh(&adapter->tx_lock); + /* + * Yield CPU + */ + if (!in_atomic()) + schedule(); + else { + for (i = 0; i < 20; i++) + cpu_relax(); /*This a nop instr on i386 */ + } + goto retry_getting_window; + } + local_producer = adapter->cmd_producer; + /* There 4 fragments per descriptor */ + no_of_desc = (frag_count + 3) >> 2; + if (netdev->features & NETIF_F_TSO) { + if (skb_shinfo(skb)->gso_size > 0) { + + no_of_desc++; + if (((skb->nh.iph)->ihl * sizeof(u32)) + + ((skb->h.th)->doff * sizeof(u32)) + + sizeof(struct ethhdr) > + (sizeof(struct cmd_desc_type0) - 2)) { + no_of_desc++; + } + } + } + k = adapter->cmd_producer; + max_tx_desc_count = adapter->max_tx_desc_count; + last_cmd_consumer = adapter->last_cmd_consumer; + if ((k + no_of_desc) >= + ((last_cmd_consumer <= k) ? last_cmd_consumer + max_tx_desc_count : + last_cmd_consumer)) { + port->stats.nocmddescriptor++; + DPRINTK(ERR, "No command descriptors available," + " producer = %d, consumer = %d count=%llu," + " dropping packet\n", producer, + adapter->last_cmd_consumer, + port->stats.nocmddescriptor); + + netif_stop_queue(netdev); + port->flags |= NETXEN_NETDEV_STATUS; + spin_unlock_bh(&adapter->tx_lock); + return NETDEV_TX_BUSY; + } + k = get_index_range(k, max_tx_desc_count, no_of_desc); + adapter->cmd_producer = k; + adapter->total_threads++; + adapter->num_threads++; + + spin_unlock_bh(&adapter->tx_lock); + /* Copy the descriptors into the hardware */ + producer = local_producer; + saved_producer = producer; + hwdesc = &hw->cmd_desc_head[producer]; + memset(hwdesc, 0, sizeof(struct cmd_desc_type0)); + /* Take skb->data itself */ + pbuf = &adapter->cmd_buf_arr[producer]; + if ((netdev->features & NETIF_F_TSO) && skb_shinfo(skb)->gso_size > 0) { + pbuf->mss = cpu_to_le16(skb_shinfo(skb)->gso_size); + hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size); + } else { + pbuf->mss = 0; + hwdesc->mss = 0; + } + pbuf->total_length = skb->len; + pbuf->skb = skb; + pbuf->cmd = TX_ETHER_PKT; + pbuf->frag_count = frag_count; + pbuf->port = port->portnum; + buffrag = &pbuf->frag_array[0]; + buffrag->dma = pci_map_single(port->pdev, skb->data, first_seg_len, + PCI_DMA_TODEVICE); + buffrag->length = first_seg_len; + netxen_set_cmd_desc_totallength(hwdesc, skb->len); + netxen_set_cmd_desc_num_of_buff(hwdesc, frag_count); + netxen_set_cmd_desc_opcode(hwdesc, TX_ETHER_PKT); + + netxen_set_cmd_desc_port(hwdesc, port->portnum); + hwdesc->buffer1_length = cpu_to_le16(first_seg_len); + hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma); + + for (i = 1, k = 1; i < frag_count; i++, k++) { + struct skb_frag_struct *frag; + int len, temp_len; + unsigned long offset; + dma_addr_t temp_dma; + + /* move to next desc. if there is a need */ + if ((i & 0x3) == 0) { + k = 0; + producer = get_next_index(producer, + adapter->max_tx_desc_count); + hwdesc = &hw->cmd_desc_head[producer]; + memset(hwdesc, 0, sizeof(struct cmd_desc_type0)); + } + frag = &skb_shinfo(skb)->frags[i - 1]; + len = frag->size; + offset = frag->page_offset; + + temp_len = len; + temp_dma = pci_map_page(port->pdev, frag->page, offset, + len, PCI_DMA_TODEVICE); + + buffrag++; + buffrag->dma = temp_dma; + buffrag->length = temp_len; + + DPRINTK(INFO, "for loop. i=%d k=%d\n", i, k); + switch (k) { + case 0: + hwdesc->buffer1_length = cpu_to_le16(temp_len); + hwdesc->addr_buffer1 = cpu_to_le64(temp_dma); + break; + case 1: + hwdesc->buffer2_length = cpu_to_le16(temp_len); + hwdesc->addr_buffer2 = cpu_to_le64(temp_dma); + break; + case 2: + hwdesc->buffer3_length = cpu_to_le16(temp_len); + hwdesc->addr_buffer3 = cpu_to_le64(temp_dma); + break; + case 3: + hwdesc->buffer4_length = temp_len; + hwdesc->addr_buffer4 = cpu_to_le64(temp_dma); + break; + } + frag++; + } + producer = get_next_index(producer, adapter->max_tx_desc_count); + + /* might change opcode to TX_TCP_LSO */ + netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb); + + /* For LSO, we need to copy the MAC/IP/TCP headers into + * the descriptor ring + */ + if (netxen_get_cmd_desc_opcode(&hw->cmd_desc_head[saved_producer]) + == TX_TCP_LSO) { + int hdr_len, first_hdr_len, more_hdr; + hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length; + if (hdr_len > (sizeof(struct cmd_desc_type0) - 2)) { + first_hdr_len = sizeof(struct cmd_desc_type0) - 2; + more_hdr = 1; + } else { + first_hdr_len = hdr_len; + more_hdr = 0; + } + /* copy the MAC/IP/TCP headers to the cmd descriptor list */ + hwdesc = &hw->cmd_desc_head[producer]; + + /* copy the first 64 bytes */ + memcpy(((void *)hwdesc) + 2, + (void *)(skb->data), first_hdr_len); + producer = get_next_index(producer, max_tx_desc_count); + + if (more_hdr) { + hwdesc = &hw->cmd_desc_head[producer]; + /* copy the next 64 bytes - should be enough except + * for pathological case + */ + memcpy((void *)hwdesc, (void *)(skb->data) + + first_hdr_len, hdr_len - first_hdr_len); + producer = get_next_index(producer, max_tx_desc_count); + } + } + spin_lock_bh(&adapter->tx_lock); + port->stats.txbytes += + netxen_get_cmd_desc_totallength(&hw->cmd_desc_head[saved_producer]); + /* Code to update the adapter considering how many producer threads + are currently working */ + if ((--adapter->num_threads) == 0) { + /* This is the last thread */ + u32 crb_producer = adapter->cmd_producer; + writel(crb_producer, + NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_PRODUCER_OFFSET)); + wmb(); + adapter->total_threads = 0; + } + + port->stats.xmitfinished++; + spin_unlock_bh(&adapter->tx_lock); + + netdev->trans_start = jiffies; + + DPRINTK(INFO, "wrote CMD producer %x to phantom\n", producer); + + DPRINTK(INFO, "Done. Send\n"); + return NETDEV_TX_OK; +} + +static void netxen_watchdog(unsigned long v) +{ + struct netxen_adapter *adapter = (struct netxen_adapter *)v; + + SCHEDULE_WORK(&adapter->watchdog_task); +} + +static void netxen_tx_timeout(struct net_device *netdev) +{ + struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev); + + SCHEDULE_WORK(&port->tx_timeout_task); +} + +static void netxen_tx_timeout_task(struct work_struct *work) +{ + struct netxen_port *port = + container_of(work, struct netxen_port, tx_timeout_task); + struct net_device *netdev = port->netdev; + unsigned long flags; + + printk(KERN_ERR "%s %s: transmit timeout, resetting.\n", + netxen_nic_driver_name, netdev->name); + + spin_lock_irqsave(&port->adapter->lock, flags); + netxen_nic_close(netdev); + netxen_nic_open(netdev); + spin_unlock_irqrestore(&port->adapter->lock, flags); + netdev->trans_start = jiffies; + netif_wake_queue(netdev); +} + +static int +netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev) +{ + u32 ret = 0; + + DPRINTK(INFO, "Entered handle ISR\n"); + + adapter->stats.ints++; + + if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) { + int count = 0; + u32 mask; + mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR)); + if ((mask & 0x80) == 0) { + /* not our interrupt */ + return ret; + } + netxen_nic_disable_int(adapter); + /* Window = 0 or 1 */ + do { + writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter, + ISR_INT_TARGET_STATUS)); + mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR)); + } while (((mask & 0x80) != 0) && (++count < 32)); + if ((mask & 0x80) != 0) + printk("Could not disable interrupt completely\n"); + + } + adapter->stats.hostints++; + + if (netxen_nic_rx_has_work(adapter) || netxen_nic_tx_has_work(adapter)) { + if (netif_rx_schedule_prep(netdev)) { + /* + * Interrupts are already disabled. + */ + __netif_rx_schedule(netdev); + } else { + static unsigned int intcount = 0; + if ((++intcount & 0xfff) == 0xfff) + printk(KERN_ERR + "%s: %s interrupt %d while in poll\n", + netxen_nic_driver_name, netdev->name, + intcount); + } + ret = 1; + } + + if (ret == 0) { + netxen_nic_enable_int(adapter); + } + + return ret; +} + +/* + * netxen_intr - Interrupt Handler + * @irq: interrupt number + * data points to adapter stucture (which may be handling more than 1 port + */ +irqreturn_t netxen_intr(int irq, void *data) +{ + struct netxen_adapter *adapter; + struct netxen_port *port; + struct net_device *netdev; + int i; + + if (unlikely(!irq)) { + return IRQ_NONE; /* Not our interrupt */ + } + + adapter = (struct netxen_adapter *)data; + for (i = 0; i < adapter->ahw.max_ports; i++) { + port = adapter->port[i]; + netdev = port->netdev; + + /* process our status queue (for all 4 ports) */ + if (netif_running(netdev)) { + netxen_handle_int(adapter, netdev); + break; + } + } + + return IRQ_HANDLED; +} + +static int netxen_nic_poll(struct net_device *netdev, int *budget) +{ + struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + int work_to_do = min(*budget, netdev->quota); + int done = 1; + int ctx; + int this_work_done; + int work_done = 0; + + DPRINTK(INFO, "polling for %d descriptors\n", *budget); + port->stats.polled++; + + work_done = 0; + for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { + /* + * Fairness issue. This will give undue weight to the + * receive context 0. + */ + + /* + * To avoid starvation, we give each of our receivers, + * a fraction of the quota. Sometimes, it might happen that we + * have enough quota to process every packet, but since all the + * packets are on one context, it gets only half of the quota, + * and ends up not processing it. + */ + this_work_done = netxen_process_rcv_ring(adapter, ctx, + work_to_do / + MAX_RCV_CTX); + work_done += this_work_done; + } + + netdev->quota -= work_done; + *budget -= work_done; + + if (work_done >= work_to_do && netxen_nic_rx_has_work(adapter) != 0) + done = 0; + + if (netxen_process_cmd_ring((unsigned long)adapter) == 0) + done = 0; + + DPRINTK(INFO, "new work_done: %d work_to_do: %d\n", + work_done, work_to_do); + if (done) { + netif_rx_complete(netdev); + netxen_nic_enable_int(adapter); + } + + return !done; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void netxen_nic_poll_controller(struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + disable_irq(adapter->irq); + netxen_intr(adapter->irq, adapter); + enable_irq(adapter->irq); +} +#endif + +static struct pci_driver netxen_driver = { + .name = netxen_nic_driver_name, + .id_table = netxen_pci_tbl, + .probe = netxen_nic_probe, + .remove = __devexit_p(netxen_nic_remove) +}; + +/* Driver Registration on NetXen card */ + +static int __init netxen_init_module(void) +{ + if ((netxen_workq = create_singlethread_workqueue("netxen")) == 0) + return -ENOMEM; + + return pci_module_init(&netxen_driver); +} + +module_init(netxen_init_module); + +static void __exit netxen_exit_module(void) +{ + /* + * Wait for some time to allow the dma to drain, if any. + */ + destroy_workqueue(netxen_workq); + pci_unregister_driver(&netxen_driver); +} + +module_exit(netxen_exit_module); |