diff options
Diffstat (limited to 'drivers/net/pcmcia/axnet_cs.c')
-rw-r--r-- | drivers/net/pcmcia/axnet_cs.c | 60 |
1 files changed, 21 insertions, 39 deletions
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 3131a59a8d3..81bafd57847 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -75,16 +75,6 @@ MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); MODULE_DESCRIPTION("Asix AX88190 PCMCIA ethernet driver"); MODULE_LICENSE("GPL"); -#ifdef PCMCIA_DEBUG -#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) - -INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static char *version = -"axnet_cs.c 1.28 2002/06/29 06:27:37 (David Hinds)"; -#else -#define DEBUG(n, args...) -#endif /*====================================================================*/ @@ -167,7 +157,7 @@ static int axnet_probe(struct pcmcia_device *link) struct net_device *dev; struct ei_device *ei_local; - DEBUG(0, "axnet_attach()\n"); + dev_dbg(&link->dev, "axnet_attach()\n"); dev = alloc_etherdev(sizeof(struct ei_device) + sizeof(axnet_dev_t)); if (!dev) @@ -180,7 +170,6 @@ static int axnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -205,7 +194,7 @@ static void axnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; - DEBUG(0, "axnet_detach(0x%p)\n", link); + dev_dbg(&link->dev, "axnet_detach(0x%p)\n", link); if (link->dev_node) unregister_netdev(dev); @@ -272,9 +261,6 @@ static int get_prom(struct pcmcia_device *link) ======================================================================*/ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -341,26 +327,29 @@ static int axnet_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; axnet_dev_t *info = PRIV(dev); - int i, j, j2, last_ret, last_fn; + int i, j, j2, ret; - DEBUG(0, "axnet_config(0x%p)\n", link); + dev_dbg(&link->dev, "axnet_config(0x%p)\n", link); /* don't trust the CIS on this; Linksys got it wrong */ link->conf.Present = 0x63; - last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL); - if (last_ret != 0) { - cs_error(link, RequestIO, last_ret); + ret = pcmcia_loop_config(link, axnet_configcheck, NULL); + if (ret != 0) goto failed; - } - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; if (link->io.NumPorts2 == 8) { link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; } - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; + dev->irq = link->irq.AssignedIRQ; dev->base_addr = link->io.BasePort1; @@ -410,7 +399,7 @@ static int axnet_config(struct pcmcia_device *link) info->phy_id = (i < 32) ? i : -1; link->dev_node = &info->node; - SET_NETDEV_DEV(dev, &handle_to_dev(link)); + SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n"); @@ -426,14 +415,12 @@ static int axnet_config(struct pcmcia_device *link) dev->base_addr, dev->irq, dev->dev_addr); if (info->phy_id != -1) { - DEBUG(0, " MII transceiver at index %d, status %x.\n", info->phy_id, j); + dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n", info->phy_id, j); } else { printk(KERN_NOTICE " No MII transceivers found!\n"); } return 0; -cs_failed: - cs_error(link, last_fn, last_ret); failed: axnet_release(link); return -ENODEV; @@ -543,7 +530,7 @@ static int axnet_open(struct net_device *dev) struct pcmcia_device *link = info->p_dev; unsigned int nic_base = dev->base_addr; - DEBUG(2, "axnet_open('%s')\n", dev->name); + dev_dbg(&link->dev, "axnet_open('%s')\n", dev->name); if (!pcmcia_dev_present(link)) return -ENODEV; @@ -572,7 +559,7 @@ static int axnet_close(struct net_device *dev) axnet_dev_t *info = PRIV(dev); struct pcmcia_device *link = info->p_dev; - DEBUG(2, "axnet_close('%s')\n", dev->name); + dev_dbg(&link->dev, "axnet_close('%s')\n", dev->name); ax_close(dev); free_irq(dev->irq, dev); @@ -741,10 +728,8 @@ static void block_input(struct net_device *dev, int count, int xfer_count = count; char *buf = skb->data; -#ifdef PCMCIA_DEBUG if ((ei_debug > 4) && (count != 4)) - printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4); -#endif + pr_debug("%s: [bi=%d]\n", dev->name, count+4); outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD); @@ -762,10 +747,7 @@ static void block_output(struct net_device *dev, int count, { unsigned int nic_base = dev->base_addr; -#ifdef PCMCIA_DEBUG - if (ei_debug > 4) - printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count); -#endif + pr_debug("%s: [bo=%d]\n", dev->name, count); /* Round the count up for word writes. Do we need to do this? What effect will an odd byte count have on the 8390? @@ -1232,8 +1214,8 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) ei_local->irqlock = 1; /* !!Assumption!! -- we stay in page 0. Don't break this. */ - while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0 - && ++nr_serviced < MAX_SERVICE) + while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0 && + ++nr_serviced < MAX_SERVICE) { if (!netif_running(dev) || (interrupts == 0xff)) { if (ei_debug > 1) |