diff options
Diffstat (limited to 'drivers/net/pcmcia')
| -rw-r--r-- | drivers/net/pcmcia/3c574_cs.c | 123 | ||||
| -rw-r--r-- | drivers/net/pcmcia/3c589_cs.c | 64 | ||||
| -rw-r--r-- | drivers/net/pcmcia/axnet_cs.c | 274 | ||||
| -rw-r--r-- | drivers/net/pcmcia/com20020_cs.c | 75 | ||||
| -rw-r--r-- | drivers/net/pcmcia/fmvj18x_cs.c | 127 | ||||
| -rw-r--r-- | drivers/net/pcmcia/ibmtr_cs.c | 115 | ||||
| -rw-r--r-- | drivers/net/pcmcia/nmclan_cs.c | 98 | ||||
| -rw-r--r-- | drivers/net/pcmcia/pcnet_cs.c | 360 | ||||
| -rw-r--r-- | drivers/net/pcmcia/smc91c92_cs.c | 219 | ||||
| -rw-r--r-- | drivers/net/pcmcia/xirc2ps_cs.c | 263 |
10 files changed, 632 insertions, 1086 deletions
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index e09267965aa..321b12f8264 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -69,6 +69,8 @@ earlier 3Com products. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -83,11 +85,9 @@ earlier 3Com products. #include <linux/skbuff.h> #include <linux/if_arp.h> #include <linux/ioport.h> -#include <linux/ethtool.h> #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -238,7 +238,6 @@ static int el3_rx(struct net_device *dev, int worklimit); static int el3_close(struct net_device *dev); static void el3_tx_timeout(struct net_device *dev); static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static const struct ethtool_ops netdev_ethtool_ops; static void set_rx_mode(struct net_device *dev); static void set_multicast_list(struct net_device *dev); @@ -280,25 +279,14 @@ static int tc574_probe(struct pcmcia_device *link) spin_lock_init(&lp->window_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; - SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); dev->watchdog_timeo = TX_TIMEOUT; return tc574_config(link); -} /* tc574_attach */ - -/* - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -*/ +} static void tc574_detach(struct pcmcia_device *link) { @@ -313,12 +301,6 @@ static void tc574_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc574_detach */ -/* - tc574_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -*/ - static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; static int tc574_config(struct pcmcia_device *link) @@ -352,7 +334,7 @@ static int tc574_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -376,8 +358,8 @@ static int tc574_config(struct pcmcia_device *link) for (i = 0; i < 3; i++) phys_addr[i] = htons(read_eeprom(ioaddr, i + 10)); if (phys_addr[0] == htons(0x6060)) { - printk(KERN_NOTICE "3c574_cs: IO port conflict at 0x%03lx" - "-0x%03lx\n", dev->base_addr, dev->base_addr+15); + pr_notice("IO port conflict at 0x%03lx-0x%03lx\n", + dev->base_addr, dev->base_addr+15); goto failed; } } @@ -391,7 +373,7 @@ static int tc574_config(struct pcmcia_device *link) outw(2<<11, ioaddr + RunnerRdCtrl); mcr = inb(ioaddr + 2); outw(0<<11, ioaddr + RunnerRdCtrl); - printk(KERN_INFO " ASIC rev %d,", mcr>>3); + pr_info(" ASIC rev %d,", mcr>>3); EL3WINDOW(3); config = inl(ioaddr + Wn3_Config); lp->default_media = (config & Xcvr) >> Xcvr_shift; @@ -428,7 +410,7 @@ static int tc574_config(struct pcmcia_device *link) } } if (phy > 32) { - printk(KERN_NOTICE " No MII transceivers found!\n"); + pr_notice(" No MII transceivers found!\n"); goto failed; } i = mdio_read(ioaddr, lp->phys, 16) | 0x40; @@ -444,18 +426,16 @@ static int tc574_config(struct pcmcia_device *link) SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { - printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n"); + pr_notice("register_netdev() failed\n"); goto failed; } - printk(KERN_INFO "%s: %s at io %#3lx, irq %d, " - "hw_addr %pM.\n", - dev->name, cardname, dev->base_addr, dev->irq, - dev->dev_addr); - printk(" %dK FIFO split %s Rx:Tx, %sMII interface.\n", - 8 << config & Ram_size, - ram_split[(config & Ram_split) >> Ram_split_shift], - config & Autoselect ? "autoselect " : ""); + netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n", + cardname, dev->base_addr, dev->irq, dev->dev_addr); + netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n", + 8 << config & Ram_size, + ram_split[(config & Ram_split) >> Ram_split_shift], + config & Autoselect ? "autoselect " : ""); return 0; @@ -465,12 +445,6 @@ failed: } /* tc574_config */ -/* - After a card is removed, tc574_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -*/ - static void tc574_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -502,14 +476,14 @@ static void dump_status(struct net_device *dev) { unsigned int ioaddr = dev->base_addr; EL3WINDOW(1); - printk(KERN_INFO " irq status %04x, rx status %04x, tx status " - "%02x, tx free %04x\n", inw(ioaddr+EL3_STATUS), - inw(ioaddr+RxStatus), inb(ioaddr+TxStatus), - inw(ioaddr+TxFree)); + netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x, tx free %04x\n", + inw(ioaddr+EL3_STATUS), + inw(ioaddr+RxStatus), inb(ioaddr+TxStatus), + inw(ioaddr+TxFree)); EL3WINDOW(4); - printk(KERN_INFO " diagnostics: fifo %04x net %04x ethernet %04x" - " media %04x\n", inw(ioaddr+0x04), inw(ioaddr+0x06), - inw(ioaddr+0x08), inw(ioaddr+0x0a)); + netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n", + inw(ioaddr+0x04), inw(ioaddr+0x06), + inw(ioaddr+0x08), inw(ioaddr+0x0a)); EL3WINDOW(1); } @@ -523,7 +497,7 @@ static void tc574_wait_for_completion(struct net_device *dev, int cmd) while (--i > 0) if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break; if (i == 0) - printk(KERN_NOTICE "%s: command 0x%04x did not complete!\n", dev->name, cmd); + netdev_notice(dev, "command 0x%04x did not complete!\n", cmd); } /* Read a word from the EEPROM using the regular EEPROM access register. @@ -710,7 +684,7 @@ static int el3_open(struct net_device *dev) netif_start_queue(dev); tc574_reset(dev); - lp->media.function = &media_check; + lp->media.function = media_check; lp->media.data = (unsigned long) dev; lp->media.expires = jiffies + HZ; add_timer(&lp->media); @@ -725,7 +699,7 @@ static void el3_tx_timeout(struct net_device *dev) { unsigned int ioaddr = dev->base_addr; - printk(KERN_NOTICE "%s: Transmit timed out!\n", dev->name); + netdev_notice(dev, "Transmit timed out!\n"); dump_status(dev); dev->stats.tx_errors++; dev->trans_start = jiffies; /* prevent tx timeout */ @@ -848,8 +822,8 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id) EL3WINDOW(4); fifo_diag = inw(ioaddr + Wn4_FIFODiag); EL3WINDOW(1); - printk(KERN_NOTICE "%s: adapter failure, FIFO diagnostic" - " register %04x.\n", dev->name, fifo_diag); + netdev_notice(dev, "adapter failure, FIFO diagnostic register %04x\n", + fifo_diag); if (fifo_diag & 0x0400) { /* Tx overrun */ tc574_wait_for_completion(dev, TxReset); @@ -903,7 +877,7 @@ static void media_check(unsigned long arg) this, we can limp along even if the interrupt is blocked */ if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) { if (!lp->fast_poll) - printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name); + netdev_info(dev, "interrupt(s) dropped!\n"); local_irq_save(flags); el3_interrupt(dev->irq, dev); @@ -926,23 +900,21 @@ static void media_check(unsigned long arg) if (media != lp->media_status) { if ((media ^ lp->media_status) & 0x0004) - printk(KERN_INFO "%s: %s link beat\n", dev->name, - (lp->media_status & 0x0004) ? "lost" : "found"); + netdev_info(dev, "%s link beat\n", + (lp->media_status & 0x0004) ? "lost" : "found"); if ((media ^ lp->media_status) & 0x0020) { lp->partner = 0; if (lp->media_status & 0x0020) { - printk(KERN_INFO "%s: autonegotiation restarted\n", - dev->name); + netdev_info(dev, "autonegotiation restarted\n"); } else if (partner) { partner &= lp->advertising; lp->partner = partner; - printk(KERN_INFO "%s: autonegotiation complete: " - "%sbaseT-%cD selected\n", dev->name, - ((partner & 0x0180) ? "100" : "10"), - ((partner & 0x0140) ? 'F' : 'H')); + netdev_info(dev, "autonegotiation complete: " + "%dbaseT-%cD selected\n", + (partner & 0x0180) ? 100 : 10, + (partner & 0x0140) ? 'F' : 'H'); } else { - printk(KERN_INFO "%s: link partner did not autonegotiate\n", - dev->name); + netdev_info(dev, "link partner did not autonegotiate\n"); } EL3WINDOW(3); @@ -952,10 +924,9 @@ static void media_check(unsigned long arg) } if (media & 0x0010) - printk(KERN_INFO "%s: remote fault detected\n", - dev->name); + netdev_info(dev, "remote fault detected\n"); if (media & 0x0002) - printk(KERN_INFO "%s: jabber detected\n", dev->name); + netdev_info(dev, "jabber detected\n"); lp->media_status = media; } spin_unlock_irqrestore(&lp->window_lock, flags); @@ -1065,16 +1036,6 @@ static int el3_rx(struct net_device *dev, int worklimit) return worklimit; } -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, "3c574_cs"); -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, -}; - /* Provide ioctl() calls to examine the MII xcvr state. */ static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { @@ -1198,9 +1159,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc574_ids); static struct pcmcia_driver tc574_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c574_cs", - }, + .name = "3c574_cs", .probe = tc574_probe, .remove = tc574_detach, .id_table = tc574_ids, diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 61f9cf2100f..79b9ca0dbdb 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -19,6 +19,8 @@ ======================================================================*/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define DRV_NAME "3c589_cs" #define DRV_VERSION "1.162-ac" @@ -41,7 +43,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -176,14 +177,6 @@ static const struct ethtool_ops netdev_ethtool_ops; static void tc589_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - tc589_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static const struct net_device_ops el3_netdev_ops = { .ndo_open = el3_open, .ndo_stop = el3_close, @@ -216,9 +209,8 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -226,16 +218,7 @@ static int tc589_probe(struct pcmcia_device *link) SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); return tc589_config(link); -} /* tc589_attach */ - -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ +} static void tc589_detach(struct pcmcia_device *link) { @@ -250,21 +233,13 @@ static void tc589_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc589_detach */ -/*====================================================================== - - tc589_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int tc589_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; __be16 *phys_addr; int ret, i, j, multi = 0, fifo; unsigned int ioaddr; - char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; + static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; u8 *buf; size_t len; @@ -273,8 +248,7 @@ static int tc589_config(struct pcmcia_device *link) phys_addr = (__be16 *)dev->dev_addr; /* Is this a 3c562? */ if (link->manf_id != MANFID_3COM) - printk(KERN_INFO "3c589_cs: hmmm, is this really a " - "3Com card??\n"); + dev_info(&link->dev, "hmmm, is this really a 3Com card??\n"); multi = (link->card_id == PRODID_3COM_3C562); link->io_lines = 16; @@ -294,7 +268,7 @@ static int tc589_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -315,8 +289,8 @@ static int tc589_config(struct pcmcia_device *link) for (i = 0; i < 3; i++) phys_addr[i] = htons(read_eeprom(ioaddr, i)); if (phys_addr[0] == htons(0x6060)) { - printk(KERN_ERR "3c589_cs: IO port conflict at 0x%03lx" - "-0x%03lx\n", dev->base_addr, dev->base_addr+15); + dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n", + dev->base_addr, dev->base_addr+15); goto failed; } } @@ -330,12 +304,12 @@ static int tc589_config(struct pcmcia_device *link) if ((if_port >= 0) && (if_port <= 3)) dev->if_port = if_port; else - printk(KERN_ERR "3c589_cs: invalid if_port requested\n"); + dev_err(&link->dev, "invalid if_port requested\n"); SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { - printk(KERN_ERR "3c589_cs: register_netdev() failed\n"); + dev_err(&link->dev, "register_netdev() failed\n"); goto failed; } @@ -352,14 +326,6 @@ failed: return -ENODEV; } /* tc589_config */ -/*====================================================================== - - After a card is removed, tc589_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void tc589_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -537,7 +503,7 @@ static int el3_open(struct net_device *dev) tc589_reset(dev); init_timer(&lp->media); - lp->media.function = &media_check; + lp->media.function = media_check; lp->media.data = (unsigned long) dev; lp->media.expires = jiffies + HZ; add_timer(&lp->media); @@ -955,9 +921,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc589_ids); static struct pcmcia_driver tc589_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c589_cs", - }, + .name = "3c589_cs", .probe = tc589_probe, .remove = tc589_detach, .id_table = tc589_ids, diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 5f05ffb240c..d2e166e29dd 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -24,6 +24,8 @@ ======================================================================*/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -32,14 +34,12 @@ #include <linux/timer.h> #include <linux/delay.h> #include <linux/spinlock.h> -#include <linux/ethtool.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/crc32.h> #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -86,7 +86,6 @@ static netdev_tx_t axnet_start_xmit(struct sk_buff *skb, static struct net_device_stats *get_stats(struct net_device *dev); static void set_multicast_list(struct net_device *dev); static void axnet_tx_timeout(struct net_device *dev); -static const struct ethtool_ops netdev_ethtool_ops; static irqreturn_t ei_irq_wrapper(int irq, void *dev_id); static void ei_watchdog(u_long arg); static void axnet_reset_8390(struct net_device *dev); @@ -140,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - axnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int axnet_probe(struct pcmcia_device *link) { axnet_dev_t *info; @@ -166,26 +157,15 @@ static int axnet_probe(struct pcmcia_device *link) info = PRIV(dev); info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &axnet_netdev_ops; - SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); dev->watchdog_timeo = TX_TIMEOUT; return axnet_config(link); } /* axnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void axnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -231,7 +211,7 @@ static int get_prom(struct pcmcia_device *link) }; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return 0; axnet_reset_8390(dev); @@ -248,14 +228,6 @@ static int get_prom(struct pcmcia_device *link) return 1; } /* get_prom */ -/*====================================================================== - - axnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -286,35 +258,16 @@ static int try_io_port(struct pcmcia_device *link) } } -static int axnet_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - int i; - cistpl_io_t *io = &cfg->io; + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->index == 0 || cfg->io.nwin == 0) + p_dev->config_index = 0x05; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) return -ENODEV; - p_dev->conf.ConfigIndex = 0x05; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -ENODEV; + return try_io_port(p_dev); } static int axnet_config(struct pcmcia_device *link) @@ -326,20 +279,19 @@ static int axnet_config(struct pcmcia_device *link) dev_dbg(&link->dev, "axnet_config(0x%p)\n", link); /* don't trust the CIS on this; Linksys got it wrong */ - link->conf.Present = 0x63; + link->config_regs = 0x63; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, axnet_configcheck, NULL); if (ret != 0) goto failed; if (!link->irq) goto failed; + + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -347,8 +299,8 @@ static int axnet_config(struct pcmcia_device *link) dev->base_addr = link->resource[0]->start; if (!get_prom(link)) { - printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n"); - printk(KERN_NOTICE "axnet_cs: use pcnet_cs instead.\n"); + pr_notice("this is not an AX88190 card!\n"); + pr_notice("use pcnet_cs instead.\n"); goto failed; } @@ -357,10 +309,10 @@ static int axnet_config(struct pcmcia_device *link) ei_status.tx_start_page = AXNET_START_PG; ei_status.rx_start_page = AXNET_START_PG + TX_PAGES; ei_status.stop_page = AXNET_STOP_PG; - ei_status.reset_8390 = &axnet_reset_8390; - ei_status.get_8390_hdr = &get_8390_hdr; - ei_status.block_input = &block_input; - ei_status.block_output = &block_output; + ei_status.reset_8390 = axnet_reset_8390; + ei_status.get_8390_hdr = get_8390_hdr; + ei_status.block_input = block_input; + ei_status.block_output = block_output; if (inb(dev->base_addr + AXNET_TEST) != 0) info->flags |= IS_AX88790; @@ -393,19 +345,18 @@ static int axnet_config(struct pcmcia_device *link) SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { - printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n"); + pr_notice("register_netdev() failed\n"); goto failed; } - printk(KERN_INFO "%s: Asix AX88%d90: io %#3lx, irq %d, " - "hw_addr %pM\n", - dev->name, ((info->flags & IS_AX88790) ? 7 : 1), - dev->base_addr, dev->irq, - dev->dev_addr); + netdev_info(dev, "Asix AX88%d90: io %#3lx, irq %d, hw_addr %pM\n", + ((info->flags & IS_AX88790) ? 7 : 1), + dev->base_addr, dev->irq, dev->dev_addr); if (info->phy_id != -1) { - dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n", info->phy_id, j); + netdev_dbg(dev, " MII transceiver at index %d, status %x\n", + info->phy_id, j); } else { - printk(KERN_NOTICE " No MII transceivers found!\n"); + netdev_notice(dev, " No MII transceivers found!\n"); } return 0; @@ -414,14 +365,6 @@ failed: return -ENODEV; } /* axnet_config */ -/*====================================================================== - - After a card is removed, axnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void axnet_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -532,7 +475,7 @@ static int axnet_open(struct net_device *dev) info->link_status = 0x00; init_timer(&info->watchdog); - info->watchdog.function = &ei_watchdog; + info->watchdog.function = ei_watchdog; info->watchdog.data = (u_long)dev; info->watchdog.expires = jiffies + HZ; add_timer(&info->watchdog); @@ -585,8 +528,7 @@ static void axnet_reset_8390(struct net_device *dev) outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ if (i == 100) - printk(KERN_ERR "%s: axnet_reset_8390() did not complete.\n", - dev->name); + netdev_err(dev, "axnet_reset_8390() did not complete\n"); } /* axnet_reset_8390 */ @@ -613,7 +555,7 @@ static void ei_watchdog(u_long arg) this, we can limp along even if the interrupt is blocked */ if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { if (!info->fast_poll) - printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name); + netdev_info(dev, "interrupt(s) dropped!\n"); ei_irq_wrapper(dev->irq, dev); info->fast_poll = HZ; } @@ -628,7 +570,7 @@ static void ei_watchdog(u_long arg) goto reschedule; link = mdio_read(mii_addr, info->phy_id, 1); if (!link || (link == 0xffff)) { - printk(KERN_INFO "%s: MII is missing!\n", dev->name); + netdev_info(dev, "MII is missing!\n"); info->phy_id = -1; goto reschedule; } @@ -636,18 +578,14 @@ static void ei_watchdog(u_long arg) link &= 0x0004; if (link != info->link_status) { u_short p = mdio_read(mii_addr, info->phy_id, 5); - printk(KERN_INFO "%s: %s link beat\n", dev->name, - (link) ? "found" : "lost"); + netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); if (link) { info->duplex_flag = (p & 0x0140) ? 0x80 : 0x00; if (p) - printk(KERN_INFO "%s: autonegotiation complete: " - "%sbaseT-%cD selected\n", dev->name, - ((p & 0x0180) ? "100" : "10"), - ((p & 0x0140) ? 'F' : 'H')); + netdev_info(dev, "autonegotiation complete: %dbaseT-%cD selected\n", + (p & 0x0180) ? 100 : 10, (p & 0x0140) ? 'F' : 'H'); else - printk(KERN_INFO "%s: link partner did not autonegotiate\n", - dev->name); + netdev_info(dev, "link partner did not autonegotiate\n"); AX88190_init(dev, 1); } info->link_status = link; @@ -658,16 +596,6 @@ reschedule: add_timer(&info->watchdog); } -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, "axnet_cs"); -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, -}; - /*====================================================================*/ static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) @@ -783,9 +711,7 @@ MODULE_DEVICE_TABLE(pcmcia, axnet_ids); static struct pcmcia_driver axnet_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "axnet_cs", - }, + .name = "axnet_cs", .probe = axnet_probe, .remove = axnet_detach, .id_table = axnet_ids, @@ -855,9 +781,6 @@ module_exit(exit_axnet_cs); */ -static const char version_8390[] = KERN_INFO \ - "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@scyld.com)\n"; - #include <linux/bitops.h> #include <asm/irq.h> #include <linux/fcntl.h> @@ -1004,9 +927,11 @@ static void axnet_tx_timeout(struct net_device *dev) isr = inb(e8390_base+EN0_ISR); spin_unlock_irqrestore(&ei_local->page_lock, flags); - printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", - dev->name, (txsr & ENTSR_ABT) ? "excess collisions." : - (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar); + netdev_printk(KERN_DEBUG, dev, + "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", + (txsr & ENTSR_ABT) ? "excess collisions." : + (isr) ? "lost interrupt?" : "cable problem?", + txsr, isr, tickssofar); if (!isr && !dev->stats.tx_packets) { @@ -1076,22 +1001,28 @@ static netdev_tx_t axnet_start_xmit(struct sk_buff *skb, output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; if (ei_debug && ei_local->tx2 > 0) - printk(KERN_DEBUG "%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n", - dev->name, ei_local->tx2, ei_local->lasttx, ei_local->txing); + netdev_printk(KERN_DEBUG, dev, + "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + ei_local->tx2, ei_local->lasttx, + ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; if (ei_debug && ei_local->tx1 > 0) - printk(KERN_DEBUG "%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n", - dev->name, ei_local->tx1, ei_local->lasttx, ei_local->txing); + netdev_printk(KERN_DEBUG, dev, + "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + ei_local->tx1, ei_local->lasttx, + ei_local->txing); } else { /* We should never get here. */ if (ei_debug) - printk(KERN_DEBUG "%s: No Tx buffers free! tx1=%d tx2=%d last=%d\n", - dev->name, ei_local->tx1, ei_local->tx2, ei_local->lasttx); + netdev_printk(KERN_DEBUG, dev, + "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, + ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -1179,23 +1110,26 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) spin_lock_irqsave(&ei_local->page_lock, flags); - if (ei_local->irqlock) - { + if (ei_local->irqlock) { #if 1 /* This might just be an interrupt for a PCI device sharing this line */ + const char *msg; /* The "irqlock" check is only for testing. */ - printk(ei_local->irqlock - ? "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n" - : "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n", - dev->name, inb_p(e8390_base + EN0_ISR), - inb_p(e8390_base + EN0_IMR)); + if (ei_local->irqlock) + msg = "Interrupted while interrupts are masked!"; + else + msg = "Reentering the interrupt handler!"; + netdev_info(dev, "%s, isr=%#2x imr=%#2x\n", + msg, + inb_p(e8390_base + EN0_ISR), + inb_p(e8390_base + EN0_IMR)); #endif spin_unlock_irqrestore(&ei_local->page_lock, flags); return IRQ_NONE; } if (ei_debug > 3) - printk(KERN_DEBUG "%s: interrupt(isr=%#2.2x).\n", dev->name, - inb_p(e8390_base + EN0_ISR)); + netdev_printk(KERN_DEBUG, dev, "interrupt(isr=%#2.2x)\n", + inb_p(e8390_base + EN0_ISR)); outb_p(0x00, e8390_base + EN0_ISR); ei_local->irqlock = 1; @@ -1206,7 +1140,8 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) { if (!netif_running(dev) || (interrupts == 0xff)) { if (ei_debug > 1) - printk(KERN_WARNING "%s: interrupt from stopped card\n", dev->name); + netdev_warn(dev, + "interrupt from stopped card\n"); outb_p(interrupts, e8390_base + EN0_ISR); interrupts = 0; break; @@ -1249,11 +1184,12 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) { /* 0xFF is valid for a card removal */ if(interrupts!=0xFF) - printk(KERN_WARNING "%s: Too much work at interrupt, status %#2.2x\n", - dev->name, interrupts); + netdev_warn(dev, "Too much work at interrupt, status %#2.2x\n", + interrupts); outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ } else { - printk(KERN_WARNING "%s: unknown interrupt %#2x\n", dev->name, interrupts); + netdev_warn(dev, "unknown interrupt %#2x\n", + interrupts); outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */ } } @@ -1287,18 +1223,19 @@ static void ei_tx_err(struct net_device *dev) unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); #ifdef VERBOSE_ERROR_DUMP - printk(KERN_DEBUG "%s: transmitter error (%#2x): ", dev->name, txsr); + netdev_printk(KERN_DEBUG, dev, + "transmitter error (%#2x):", txsr); if (txsr & ENTSR_ABT) - printk("excess-collisions "); + pr_cont(" excess-collisions"); if (txsr & ENTSR_ND) - printk("non-deferral "); + pr_cont(" non-deferral"); if (txsr & ENTSR_CRS) - printk("lost-carrier "); + pr_cont(" lost-carrier"); if (txsr & ENTSR_FU) - printk("FIFO-underrun "); + pr_cont(" FIFO-underrun"); if (txsr & ENTSR_CDH) - printk("lost-heartbeat "); - printk("\n"); + pr_cont(" lost-heartbeat"); + pr_cont("\n"); #endif if (tx_was_aborted) @@ -1335,8 +1272,9 @@ static void ei_tx_intr(struct net_device *dev) if (ei_local->tx1 < 0) { if (ei_local->lasttx != 1 && ei_local->lasttx != -1) - printk(KERN_ERR "%s: bogus last_tx_buffer %d, tx1=%d.\n", - ei_local->name, ei_local->lasttx, ei_local->tx1); + netdev_err(dev, "%s: bogus last_tx_buffer %d, tx1=%d\n", + ei_local->name, ei_local->lasttx, + ei_local->tx1); ei_local->tx1 = 0; if (ei_local->tx2 > 0) { @@ -1351,8 +1289,9 @@ static void ei_tx_intr(struct net_device *dev) else if (ei_local->tx2 < 0) { if (ei_local->lasttx != 2 && ei_local->lasttx != -2) - printk("%s: bogus last_tx_buffer %d, tx2=%d.\n", - ei_local->name, ei_local->lasttx, ei_local->tx2); + netdev_info(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", + ei_local->name, ei_local->lasttx, + ei_local->tx2); ei_local->tx2 = 0; if (ei_local->tx1 > 0) { @@ -1365,8 +1304,9 @@ static void ei_tx_intr(struct net_device *dev) else ei_local->lasttx = 10, ei_local->txing = 0; } -// else printk(KERN_WARNING "%s: unexpected TX-done interrupt, lasttx=%d.\n", -// dev->name, ei_local->lasttx); +// else +// netdev_warn(dev, "unexpected TX-done interrupt, lasttx=%d\n", +// ei_local->lasttx); /* Minimize Tx latency: update the statistics after we restart TXing. */ if (status & ENTSR_COL) @@ -1429,8 +1369,8 @@ static void ei_receive(struct net_device *dev) is that some clones crash in roughly the same way. */ if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) - printk(KERN_ERR "%s: mismatched read page pointers %2x vs %2x.\n", - dev->name, this_frame, ei_local->current_page); + netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", + this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ break; /* Done for now */ @@ -1446,9 +1386,10 @@ static void ei_receive(struct net_device *dev) if (pkt_len < 60 || pkt_len > 1518) { if (ei_debug) - printk(KERN_DEBUG "%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n", - dev->name, rx_frame.count, rx_frame.status, - rx_frame.next); + netdev_printk(KERN_DEBUG, dev, + "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } @@ -1460,8 +1401,9 @@ static void ei_receive(struct net_device *dev) if (skb == NULL) { if (ei_debug > 1) - printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n", - dev->name, pkt_len); + netdev_printk(KERN_DEBUG, dev, + "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } @@ -1481,9 +1423,10 @@ static void ei_receive(struct net_device *dev) else { if (ei_debug) - printk(KERN_DEBUG "%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n", - dev->name, rx_frame.status, rx_frame.next, - rx_frame.count); + netdev_printk(KERN_DEBUG, dev, + "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -1493,8 +1436,8 @@ static void ei_receive(struct net_device *dev) /* This _should_ never happen: it's here for avoiding bad clones. */ if (next_frame >= ei_local->stop_page) { - printk("%s: next frame inconsistency, %#2x\n", dev->name, - next_frame); + netdev_info(dev, "next frame inconsistency, %#2x\n", + next_frame); next_frame = ei_local->rx_start_page; } ei_local->current_page = next_frame; @@ -1529,7 +1472,7 @@ static void ei_rx_overrun(struct net_device *dev) outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); if (ei_debug > 1) - printk(KERN_DEBUG "%s: Receiver overrun.\n", dev->name); + netdev_printk(KERN_DEBUG, dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* @@ -1726,7 +1669,7 @@ static void AX88190_init(struct net_device *dev, int startp) { outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); if(inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i]) - printk(KERN_ERR "Hw. address read/write mismap %d\n",i); + netdev_err(dev, "Hw. address read/write mismap %d\n", i); } outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); @@ -1763,8 +1706,7 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length, if (inb_p(e8390_base) & E8390_TRANS) { - printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n", - dev->name); + netdev_warn(dev, "trigger_send() called with the transmitter busy\n"); return; } outb_p(length & 0xff, e8390_base + EN0_TCNTLO); diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3c400cfa82a..27bfad76fc4 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -43,7 +43,6 @@ #include <linux/arcdevice.h> #include <linux/com20020.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -52,23 +51,23 @@ #define VERSION "arcnet: COM20020 PCMCIA support loaded.\n" -#ifdef DEBUG static void regdump(struct net_device *dev) { +#ifdef DEBUG int ioaddr = dev->base_addr; int count; - printk("com20020 register dump:\n"); + netdev_dbg(dev, "register dump:\n"); for (count = ioaddr; count < ioaddr + 16; count++) { if (!(count % 16)) - printk("\n%04X: ", count); - printk("%02X ", inb(count)); + pr_cont("%04X:", count); + pr_cont(" %02X", inb(count)); } - printk("\n"); + pr_cont("\n"); - printk("buffer0 dump:\n"); + netdev_dbg(dev, "buffer0 dump:\n"); /* set up the address register */ count = 0; outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI); @@ -77,19 +76,15 @@ static void regdump(struct net_device *dev) for (count = 0; count < 256+32; count++) { if (!(count % 16)) - printk("\n%04X: ", count); + pr_cont("%04X:", count); /* copy the data */ - printk("%02X ", inb(_MEMDATA)); + pr_cont(" %02X", inb(_MEMDATA)); } - printk("\n"); + pr_cont("\n"); +#endif } -#else - -static inline void regdump(struct net_device *dev) { } - -#endif /*====================================================================*/ @@ -123,14 +118,6 @@ typedef struct com20020_dev_t { struct net_device *dev; } com20020_dev_t; -/*====================================================================== - - com20020_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int com20020_probe(struct pcmcia_device *p_dev) { com20020_dev_t *info; @@ -160,8 +147,7 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[0]->end = 16; - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ; info->dev = dev; p_dev->priv = info; @@ -174,15 +160,6 @@ fail_alloc_info: return -ENOMEM; } /* com20020_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void com20020_detach(struct pcmcia_device *link) { struct com20020_dev_t *info = link->priv; @@ -221,14 +198,6 @@ static void com20020_detach(struct pcmcia_device *link) } /* com20020_detach */ -/*====================================================================== - - com20020_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int com20020_config(struct pcmcia_device *link) { struct arcnet_local *lp; @@ -282,7 +251,7 @@ static int com20020_config(struct pcmcia_device *link) dev->irq = link->irq; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -301,13 +270,13 @@ static int com20020_config(struct pcmcia_device *link) i = com20020_found(dev, 0); /* calls register_netdev */ if (i != 0) { - dev_printk(KERN_NOTICE, &link->dev, - "com20020_cs: com20020_found() failed\n"); + dev_notice(&link->dev, + "com20020_found() failed\n"); goto failed; } - dev_dbg(&link->dev,KERN_INFO "%s: port %#3lx, irq %d\n", - dev->name, dev->base_addr, dev->irq); + netdev_dbg(dev, "port %#3lx, irq %d\n", + dev->base_addr, dev->irq); return 0; failed: @@ -316,14 +285,6 @@ failed: return -ENODEV; } /* com20020_config */ -/*====================================================================== - - After a card is removed, com20020_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void com20020_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "com20020_release\n"); @@ -366,9 +327,7 @@ MODULE_DEVICE_TABLE(pcmcia, com20020_ids); static struct pcmcia_driver com20020_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "com20020_cs", - }, + .name = "com20020_cs", .probe = com20020_probe, .remove = com20020_detach, .id_table = com20020_ids, diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 98fffb03ecd..9226cda4d05 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -28,6 +28,8 @@ ======================================================================*/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define DRV_NAME "fmvj18x_cs" #define DRV_VERSION "2.9" @@ -49,7 +51,6 @@ #include <linux/ioport.h> #include <linux/crc32.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -252,8 +253,7 @@ static int fmvj18x_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &fjn_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -291,7 +291,7 @@ static int mfc_try_io_port(struct pcmcia_device *link) link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (link->resource[1]->start == 0) { link->resource[1]->end = 0; - printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n"); + pr_notice("out of resource for serial\n"); } ret = pcmcia_request_io(link); if (ret == 0) @@ -313,7 +313,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ - link->conf.ConfigIndex = + link->config_index = ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; return ret; } @@ -321,11 +321,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) return ret; /* RequestIO failed */ } -static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { return 0; /* strange, but that's what the code did already before... */ } @@ -362,28 +358,28 @@ static int fmvj18x_config(struct pcmcia_device *link) link->card_id == PRODID_TDK_NP9610 || link->card_id == PRODID_TDK_MN3200) { /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; break; case MANFID_FUJITSU: - if (link->conf.ConfigBase == 0x0fe0) + if (link->config_base == 0x0fe0) cardtype = MBH10302; else if (link->card_id == PRODID_FUJITSU_MBH10302) /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), @@ -403,10 +399,10 @@ static int fmvj18x_config(struct pcmcia_device *link) case MANFID_FUJITSU: if (link->card_id == PRODID_FUJITSU_MBH10304) { cardtype = XXX10304; /* MBH10304 with buggy CIS */ - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; } else { cardtype = MBH10302; /* NextCom NC5310, etc. */ - link->conf.ConfigIndex = 1; + link->config_index = 1; } break; case MANFID_UNGERMANN: @@ -414,7 +410,7 @@ static int fmvj18x_config(struct pcmcia_device *link) break; default: cardtype = MBH10302; - link->conf.ConfigIndex = 1; + link->config_index = 1; } } @@ -432,7 +428,7 @@ static int fmvj18x_config(struct pcmcia_device *link) ret = pcmcia_request_irq(link, fjn_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -503,7 +499,7 @@ static int fmvj18x_config(struct pcmcia_device *link) case XXX10304: /* Read MACID from Buggy CIS */ if (fmvj18x_get_hwinfo(link, buggybuf) == -1) { - printk(KERN_NOTICE "fmvj18x_cs: unable to read hardware net address.\n"); + pr_notice("unable to read hardware net address\n"); goto failed; } for (i = 0 ; i < 6; i++) { @@ -524,15 +520,14 @@ static int fmvj18x_config(struct pcmcia_device *link) SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { - printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n"); + pr_notice("register_netdev() failed\n"); goto failed; } /* print current configuration */ - printk(KERN_INFO "%s: %s, sram %s, port %#3lx, irq %d, " - "hw_addr %pM\n", - dev->name, card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2", - dev->base_addr, dev->irq, dev->dev_addr); + netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n", + card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2", + dev->base_addr, dev->irq, dev->dev_addr); return 0; @@ -544,20 +539,18 @@ failed: static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) { - win_req_t req; u_char __iomem *base; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -1; - base = ioremap(req.Base, req.Size); - pcmcia_map_mem_page(link, link->win, 0); + base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); + pcmcia_map_mem_page(link, link->resource[2], 0); /* * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format @@ -582,7 +575,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) } iounmap(base); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i != 0x200) ? 0 : -1; } /* fmvj18x_get_hwinfo */ @@ -590,27 +583,26 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) static int fmvj18x_setup_mfc(struct pcmcia_device *link) { - win_req_t req; int i; struct net_device *dev = link->priv; unsigned int ioaddr; local_info_t *lp = netdev_priv(dev); /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[3]->start = link->resource[3]->end = 0; + i = pcmcia_request_window(link, link->resource[3], 0); if (i != 0) return -1; - lp->base = ioremap(req.Base, req.Size); + lp->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); if (lp->base == NULL) { - printk(KERN_NOTICE "fmvj18x_cs: ioremap failed\n"); + netdev_notice(dev, "ioremap failed\n"); return -1; } - i = pcmcia_map_mem_page(link, link->win, 0); + i = pcmcia_map_mem_page(link, link->resource[3], 0); if (i != 0) { iounmap(lp->base); lp->base = NULL; @@ -638,7 +630,6 @@ static void fmvj18x_release(struct pcmcia_device *link) struct net_device *dev = link->priv; local_info_t *lp = netdev_priv(dev); u_char __iomem *tmp; - int j; dev_dbg(&link->dev, "fmvj18x_release\n"); @@ -646,7 +637,6 @@ static void fmvj18x_release(struct pcmcia_device *link) tmp = lp->base; lp->base = NULL; /* set NULL before iounmap */ iounmap(tmp); - j = pcmcia_release_window(link, link->win); } pcmcia_disable_device(link); @@ -708,9 +698,7 @@ MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); static struct pcmcia_driver fmvj18x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fmvj18x_cs", - }, + .name = "fmvj18x_cs", .probe = fmvj18x_probe, .remove = fmvj18x_detach, .id_table = fmvj18x_ids, @@ -800,17 +788,16 @@ static void fjn_tx_timeout(struct net_device *dev) struct local_info_t *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; - printk(KERN_NOTICE "%s: transmit timed out with status %04x, %s?\n", - dev->name, htons(inw(ioaddr + TX_STATUS)), - inb(ioaddr + TX_STATUS) & F_TMT_RDY - ? "IRQ conflict" : "network cable problem"); - printk(KERN_NOTICE "%s: timeout registers: %04x %04x %04x " - "%04x %04x %04x %04x %04x.\n", - dev->name, htons(inw(ioaddr + 0)), - htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)), - htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)), - htons(inw(ioaddr +10)), htons(inw(ioaddr +12)), - htons(inw(ioaddr +14))); + netdev_notice(dev, "transmit timed out with status %04x, %s?\n", + htons(inw(ioaddr + TX_STATUS)), + inb(ioaddr + TX_STATUS) & F_TMT_RDY + ? "IRQ conflict" : "network cable problem"); + netdev_notice(dev, "timeout registers: %04x %04x %04x " + "%04x %04x %04x %04x %04x.\n", + htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)), + htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)), + htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)), + htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14))); dev->stats.tx_errors++; /* ToDo: We should try to restart the adaptor... */ local_irq_disable(); @@ -845,13 +832,13 @@ static netdev_tx_t fjn_start_xmit(struct sk_buff *skb, unsigned char *buf = skb->data; if (length > ETH_FRAME_LEN) { - printk(KERN_NOTICE "%s: Attempting to send a large packet" - " (%d bytes).\n", dev->name, length); + netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n", + length); return NETDEV_TX_BUSY; } - pr_debug("%s: Transmitting a packet of length %lu.\n", - dev->name, (unsigned long)skb->len); + netdev_dbg(dev, "Transmitting a packet of length %lu\n", + (unsigned long)skb->len); dev->stats.tx_bytes += skb->len; /* Disable both interrupts. */ @@ -904,7 +891,7 @@ static void fjn_reset(struct net_device *dev) unsigned int ioaddr = dev->base_addr; int i; - pr_debug("fjn_reset(%s) called.\n",dev->name); + netdev_dbg(dev, "fjn_reset() called\n"); /* Reset controller */ if( sram_config == 0 ) @@ -988,8 +975,8 @@ static void fjn_rx(struct net_device *dev) while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) { u_short status = inw(ioaddr + DATAPORT); - pr_debug("%s: Rxing packet mode %02x status %04x.\n", - dev->name, inb(ioaddr + RX_MODE), status); + netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n", + inb(ioaddr + RX_MODE), status); #ifndef final_version if (status == 0) { outb(F_SKP_PKT, ioaddr + RX_SKIP); @@ -1008,16 +995,16 @@ static void fjn_rx(struct net_device *dev) struct sk_buff *skb; if (pkt_len > 1550) { - printk(KERN_NOTICE "%s: The FMV-18x claimed a very " - "large packet, size %d.\n", dev->name, pkt_len); + netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n", + pkt_len); outb(F_SKP_PKT, ioaddr + RX_SKIP); dev->stats.rx_errors++; break; } skb = dev_alloc_skb(pkt_len+2); if (skb == NULL) { - printk(KERN_NOTICE "%s: Memory squeeze, dropping " - "packet (len %d).\n", dev->name, pkt_len); + netdev_notice(dev, "Memory squeeze, dropping packet (len %d)\n", + pkt_len); outb(F_SKP_PKT, ioaddr + RX_SKIP); dev->stats.rx_dropped++; break; diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index b0d06a3d962..15d57f5b6f2 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -45,6 +45,8 @@ ======================================================================*/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/ptrace.h> @@ -52,12 +54,10 @@ #include <linux/string.h> #include <linux/timer.h> #include <linux/module.h> -#include <linux/ethtool.h> #include <linux/netdevice.h> #include <linux/trdevice.h> #include <linux/ibmtr.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -102,35 +102,16 @@ static void ibmtr_detach(struct pcmcia_device *p_dev); typedef struct ibmtr_dev_t { struct pcmcia_device *p_dev; - struct net_device *dev; - window_handle_t sram_win_handle; - struct tok_info *ti; + struct net_device *dev; + struct tok_info *ti; } ibmtr_dev_t; -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, "ibmtr_cs"); -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, -}; - static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { ibmtr_dev_t *info = dev_id; struct net_device *dev = info->dev; return tok_interrupt(irq, dev); }; -/*====================================================================== - - ibmtr_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int __devinit ibmtr_attach(struct pcmcia_device *link) { ibmtr_dev_t *info; @@ -153,26 +134,14 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_regs = PRESENT_OPTION; info->dev = dev; - SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); - return ibmtr_config(link); } /* ibmtr_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ibmtr_detach(struct pcmcia_device *link) { struct ibmtr_dev_t *info = link->priv; @@ -197,26 +166,17 @@ static void ibmtr_detach(struct pcmcia_device *link) kfree(info); } /* ibmtr_detach */ -/*====================================================================== - - ibmtr_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - token-ring device available to the system. - -======================================================================*/ - static int __devinit ibmtr_config(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; struct tok_info *ti = netdev_priv(dev); - win_req_t req; int i, ret; dev_dbg(&link->dev, "ibmtr_config\n"); - link->conf.ConfigIndex = 0x61; link->io_lines = 16; + link->config_index = 0x61; /* Determine if this is PRIMARY or ALTERNATE. */ @@ -240,39 +200,39 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); /* Allocate the MMIO memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x2000; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[2]->flags |= WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x2000; + ret = pcmcia_request_window(link, link->resource[2], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, mmiobase); + ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase); if (ret) goto failed; - ti->mmio = ioremap(req.Base, req.Size); + ti->mmio = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /* Allocate the SRAM memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = sramsize * 1024; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &info->sram_win_handle); + link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; + link->resource[3]->end = sramsize * 1024; + ret = pcmcia_request_window(link, link->resource[3], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase); + ret = pcmcia_map_mem_page(link, link->resource[3], srambase); if (ret) goto failed; ti->sram_base = srambase >> 12; - ti->sram_virt = ioremap(req.Base, req.Size); - ti->sram_phys = req.Base; + ti->sram_virt = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); + ti->sram_phys = link->resource[3]->start; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -285,15 +245,14 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) i = ibmtr_probe_card(dev); if (i != 0) { - printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n"); + pr_notice("register_netdev() failed\n"); goto failed; } - printk(KERN_INFO - "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n", - dev->name, dev->base_addr, dev->irq, - (u_long)ti->mmio, (u_long)(ti->sram_base << 12), - dev->dev_addr); + netdev_info(dev, "port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n", + dev->base_addr, dev->irq, + (u_long)ti->mmio, (u_long)(ti->sram_base << 12), + dev->dev_addr); return 0; failed: @@ -301,14 +260,6 @@ failed: return -ENODEV; } /* ibmtr_config */ -/*====================================================================== - - After a card is removed, ibmtr_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ibmtr_release(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; @@ -316,7 +267,7 @@ static void ibmtr_release(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct tok_info *ti = netdev_priv(dev); iounmap(ti->mmio); } @@ -398,9 +349,7 @@ MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); static struct pcmcia_driver ibmtr_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ibmtr_cs", - }, + .name = "ibmtr_cs", .probe = ibmtr_attach, .remove = ibmtr_detach, .id_table = ibmtr_ids, diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 68f2deeb3ad..0a2b0f9cdf3 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -111,6 +111,8 @@ Log: nmclan_cs.c,v ---------------------------------------------------------------------------- */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define DRV_NAME "nmclan_cs" #define DRV_VERSION "0.16" @@ -146,7 +148,6 @@ Include Files #include <linux/ioport.h> #include <linux/bitops.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -435,13 +436,6 @@ static const struct net_device_ops mace_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/* ---------------------------------------------------------------------------- -nmclan_attach - Creates an "instance" of the driver, allocating local data - structures for one device. The device is registered with Card - Services. ----------------------------------------------------------------------------- */ - static int nmclan_probe(struct pcmcia_device *link) { mace_private *lp; @@ -460,10 +454,9 @@ static int nmclan_probe(struct pcmcia_device *link) spin_lock_init(&lp->bank_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; lp->tx_free_frames=AM2150_MAX_TX_FRAMES; @@ -474,14 +467,6 @@ static int nmclan_probe(struct pcmcia_device *link) return nmclan_config(link); } /* nmclan_attach */ -/* ---------------------------------------------------------------------------- -nmclan_detach - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. ----------------------------------------------------------------------------- */ - static void nmclan_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -519,7 +504,7 @@ static int mace_read(mace_private *lp, unsigned int ioaddr, int reg) spin_unlock_irqrestore(&lp->bank_lock, flags); break; } - return (data & 0xFF); + return data & 0xFF; } /* mace_read */ /* ---------------------------------------------------------------------------- @@ -563,7 +548,7 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) /* Wait for reset bit to be cleared automatically after <= 200ns */; if(++ct > 500) { - printk(KERN_ERR "mace: reset failed, card removed ?\n"); + pr_err("reset failed, card removed?\n"); return -1; } udelay(1); @@ -610,7 +595,7 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) { if(++ ct > 500) { - printk(KERN_ERR "mace: ADDRCHG timeout, card removed ?\n"); + pr_err("ADDRCHG timeout, card removed?\n"); return -1; } } @@ -625,13 +610,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) return 0; } /* mace_init */ -/* ---------------------------------------------------------------------------- -nmclan_config - This routine is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. ----------------------------------------------------------------------------- */ - static int nmclan_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -650,7 +628,7 @@ static int nmclan_config(struct pcmcia_device *link) ret = pcmcia_request_exclusive_irq(link, mace_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -678,8 +656,8 @@ static int nmclan_config(struct pcmcia_device *link) dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n", sig[0], sig[1]); } else { - printk(KERN_NOTICE "nmclan_cs: mace id not found: %x %x should" - " be 0x40 0x?9\n", sig[0], sig[1]); + pr_notice("mace id not found: %x %x should be 0x40 0x?9\n", + sig[0], sig[1]); return -ENODEV; } } @@ -691,20 +669,18 @@ static int nmclan_config(struct pcmcia_device *link) if (if_port <= 2) dev->if_port = if_port; else - printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n"); + pr_notice("invalid if_port requested\n"); SET_NETDEV_DEV(dev, &link->dev); i = register_netdev(dev); if (i != 0) { - printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n"); + pr_notice("register_netdev() failed\n"); goto failed; } - printk(KERN_INFO "%s: nmclan: port %#3lx, irq %d, %s port," - " hw_addr %pM\n", - dev->name, dev->base_addr, dev->irq, if_names[dev->if_port], - dev->dev_addr); + netdev_info(dev, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n", + dev->base_addr, dev->irq, if_names[dev->if_port], dev->dev_addr); return 0; failed: @@ -712,12 +688,6 @@ failed: return -ENODEV; } /* nmclan_config */ -/* ---------------------------------------------------------------------------- -nmclan_release - After a card is removed, nmclan_release() will unregister the - net device, and release the PCMCIA configuration. If the device - is still open, this will be postponed until it is closed. ----------------------------------------------------------------------------- */ static void nmclan_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "nmclan_release\n"); @@ -798,8 +768,7 @@ static int mace_config(struct net_device *dev, struct ifmap *map) if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { if (map->port <= 2) { dev->if_port = map->port; - printk(KERN_INFO "%s: switched to %s port\n", dev->name, - if_names[dev->if_port]); + netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); } else return -EINVAL; } @@ -878,12 +847,12 @@ static void mace_tx_timeout(struct net_device *dev) mace_private *lp = netdev_priv(dev); struct pcmcia_device *link = lp->p_dev; - printk(KERN_NOTICE "%s: transmit timed out -- ", dev->name); + netdev_notice(dev, "transmit timed out -- "); #if RESET_ON_TIMEOUT - printk("resetting card\n"); + pr_cont("resetting card\n"); pcmcia_reset_card(link->socket); #else /* #if RESET_ON_TIMEOUT */ - printk("NOT resetting card\n"); + pr_cont("NOT resetting card\n"); #endif /* #if RESET_ON_TIMEOUT */ dev->trans_start = jiffies; /* prevent tx timeout */ netif_wake_queue(dev); @@ -965,22 +934,21 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id) ioaddr = dev->base_addr; if (lp->tx_irq_disabled) { - printk( - (lp->tx_irq_disabled? - KERN_NOTICE "%s: Interrupt with tx_irq_disabled " - "[isr=%02X, imr=%02X]\n": - KERN_NOTICE "%s: Re-entering the interrupt handler " - "[isr=%02X, imr=%02X]\n"), - dev->name, - inb(ioaddr + AM2150_MACE_BASE + MACE_IR), - inb(ioaddr + AM2150_MACE_BASE + MACE_IMR) - ); + const char *msg; + if (lp->tx_irq_disabled) + msg = "Interrupt with tx_irq_disabled"; + else + msg = "Re-entering the interrupt handler"; + netdev_notice(dev, "%s [isr=%02X, imr=%02X]\n", + msg, + inb(ioaddr + AM2150_MACE_BASE + MACE_IR), + inb(ioaddr + AM2150_MACE_BASE + MACE_IMR)); /* WARNING: MACE_IR has been read! */ return IRQ_NONE; } if (!netif_device_present(dev)) { - pr_debug("%s: interrupt from dead card\n", dev->name); + netdev_dbg(dev, "interrupt from dead card\n"); return IRQ_NONE; } @@ -1378,8 +1346,8 @@ static void BuildLAF(int *ladrf, int *adr) printk(KERN_DEBUG " adr =%pM\n", adr); printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode); for (i = 0; i < 8; i++) - printk(KERN_CONT " %02X", ladrf[i]); - printk(KERN_CONT "\n"); + pr_cont(" %02X", ladrf[i]); + pr_cont("\n"); #endif } /* BuildLAF */ @@ -1535,9 +1503,7 @@ MODULE_DEVICE_TABLE(pcmcia, nmclan_ids); static struct pcmcia_driver nmclan_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nmclan_cs", - }, + .name = "nmclan_cs", .probe = nmclan_probe, .remove = nmclan_detach, .id_table = nmclan_ids, diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index c3edfe4c265..03096c80103 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -28,6 +28,8 @@ ======================================================================*/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -35,14 +37,12 @@ #include <linux/string.h> #include <linux/timer.h> #include <linux/delay.h> -#include <linux/ethtool.h> #include <linux/netdevice.h> #include <linux/log2.h> #include <linux/etherdevice.h> #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -100,7 +100,6 @@ static void pcnet_release(struct pcmcia_device *link); static int pcnet_open(struct net_device *dev); static int pcnet_close(struct net_device *dev); static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static const struct ethtool_ops netdev_ethtool_ops; static irqreturn_t ei_irq_wrapper(int irq, void *dev_id); static void ei_watchdog(u_long arg); static void pcnet_reset_8390(struct net_device *dev); @@ -238,14 +237,6 @@ static const struct net_device_ops pcnet_netdev_ops = { #endif }; -/*====================================================================== - - pcnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int pcnet_probe(struct pcmcia_device *link) { pcnet_dev_t *info; @@ -260,23 +251,13 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; dev->netdev_ops = &pcnet_netdev_ops; return pcnet_config(link); } /* pcnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void pcnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -300,22 +281,22 @@ static void pcnet_detach(struct pcmcia_device *link) static hw_info_t *get_hwinfo(struct pcmcia_device *link) { struct net_device *dev = link->priv; - win_req_t req; u_char __iomem *base, *virt; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return NULL; - virt = ioremap(req.Base, req.Size); + virt = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); for (i = 0; i < NR_INFO; i++) { - pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1)); - base = &virt[hw_info[i].offset & (req.Size-1)]; + pcmcia_map_mem_page(link, link->resource[2], + hw_info[i].offset & ~(resource_size(link->resource[2])-1)); + base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && (readb(base+4) == hw_info[i].a2)) { @@ -326,7 +307,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) } iounmap(virt); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i < NR_INFO) ? hw_info+i : NULL; } /* get_hwinfo */ @@ -421,7 +402,7 @@ static hw_info_t *get_ax88190(struct pcmcia_device *link) int i, j; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return NULL; outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ @@ -434,8 +415,6 @@ static hw_info_t *get_ax88190(struct pcmcia_device *link) dev->dev_addr[i] = j & 0xff; dev->dev_addr[i+1] = j >> 8; } - printk(KERN_NOTICE "pcnet_cs: this is an AX88190 card!\n"); - printk(KERN_NOTICE "pcnet_cs: use axnet_cs instead.\n"); return NULL; } @@ -463,14 +442,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) return &default_info; } /* get_hwired */ -/*====================================================================== - - pcnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -502,100 +473,105 @@ static int try_io_port(struct pcmcia_device *link) } } -static int pcnet_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) { - int *has_shmem = priv_data; - int i; - cistpl_io_t *io = &cfg->io; + int *priv = priv_data; + int try = (*priv & 0x1); + + *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; - if (cfg->index == 0 || cfg->io.nwin == 0) + if (p_dev->config_index == 0) return -EINVAL; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) + return -EINVAL; + + if (try) + p_dev->io_lines = 16; + return try_io_port(p_dev); +} + +static hw_info_t *pcnet_try_config(struct pcmcia_device *link, + int *has_shmem, int try) +{ + struct net_device *dev = link->priv; + hw_info_t *local_hw_info; + pcnet_dev_t *info = PRIV(dev); + int priv = try; + int ret; + + ret = pcmcia_loop_config(link, pcnet_confcheck, &priv); + if (ret) { + dev_warn(&link->dev, "no useable port range found\n"); + return NULL; } + *has_shmem = (priv & 0x10); - *has_shmem = ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)); - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); + if (!link->irq) + return NULL; - return 0; + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((link->manf_id == MANFID_IBM) && + (link->card_id == PRODID_IBM_HOME_AND_AWAY)) + link->config_index |= 0x10; + + ret = pcmcia_enable_device(link); + if (ret) + return NULL; + + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + + if (info->flags & HAS_MISC_REG) { + if ((if_port == 1) || (if_port == 2)) + dev->if_port = if_port; + else + dev_notice(&link->dev, "invalid if_port requested\n"); + } else + dev->if_port = 0; + + if ((link->config_base == 0x03c0) && + (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { + dev_info(&link->dev, + "this is an AX88190 card - use axnet_cs instead.\n"); + return NULL; + } + + local_hw_info = get_hwinfo(link); + if (!local_hw_info) + local_hw_info = get_prom(link); + if (!local_hw_info) + local_hw_info = get_dl10019(link); + if (!local_hw_info) + local_hw_info = get_ax88190(link); + if (!local_hw_info) + local_hw_info = get_hwired(link); + + return local_hw_info; } static int pcnet_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - int ret, start_pg, stop_pg, cm_offset; + int start_pg, stop_pg, cm_offset; int has_shmem = 0; hw_info_t *local_hw_info; dev_dbg(&link->dev, "pcnet_config\n"); - ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem); - if (ret) - goto failed; - - if (!link->irq) - goto failed; - - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - if ((link->manf_id == MANFID_IBM) && - (link->card_id == PRODID_IBM_HOME_AND_AWAY)) - link->conf.ConfigIndex |= 0x10; - - ret = pcmcia_request_configuration(link, &link->conf); - if (ret) - goto failed; - dev->irq = link->irq; - dev->base_addr = link->resource[0]->start; - if (info->flags & HAS_MISC_REG) { - if ((if_port == 1) || (if_port == 2)) - dev->if_port = if_port; - else - printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n"); - } else { - dev->if_port = 0; - } - - if ((link->conf.ConfigBase == 0x03c0) && - (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { - printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n"); - printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n"); - goto failed; - } - - local_hw_info = get_hwinfo(link); - if (local_hw_info == NULL) - local_hw_info = get_prom(link); - if (local_hw_info == NULL) - local_hw_info = get_dl10019(link); - if (local_hw_info == NULL) - local_hw_info = get_ax88190(link); - if (local_hw_info == NULL) - local_hw_info = get_hwired(link); - - if (local_hw_info == NULL) { - printk(KERN_NOTICE "pcnet_cs: unable to read hardware net" - " address for io base %#3lx\n", dev->base_addr); - goto failed; + local_hw_info = pcnet_try_config(link, &has_shmem, 0); + if (!local_hw_info) { + /* check whether forcing io_lines to 16 helps... */ + pcmcia_disable_device(link); + local_hw_info = pcnet_try_config(link, &has_shmem, 1); + if (local_hw_info == NULL) { + dev_notice(&link->dev, "unable to read hardware net" + " address for io base %#3lx\n", dev->base_addr); + goto failed; + } } info->flags = local_hw_info->flags; @@ -626,9 +602,7 @@ static int pcnet_config(struct pcmcia_device *link) ei_status.name = "NE2000"; ei_status.word16 = 1; - ei_status.reset_8390 = &pcnet_reset_8390; - - SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); + ei_status.reset_8390 = pcnet_reset_8390; if (info->flags & (IS_DL10019|IS_DL10022)) mii_phy_probe(dev); @@ -636,25 +610,25 @@ static int pcnet_config(struct pcmcia_device *link) SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { - printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n"); + pr_notice("register_netdev() failed\n"); goto failed; } if (info->flags & (IS_DL10019|IS_DL10022)) { u_char id = inb(dev->base_addr + 0x1a); - printk(KERN_INFO "%s: NE2000 (DL100%d rev %02x): ", - dev->name, ((info->flags & IS_DL10022) ? 22 : 19), id); + netdev_info(dev, "NE2000 (DL100%d rev %02x): ", + (info->flags & IS_DL10022) ? 22 : 19, id); if (info->pna_phy) - printk("PNA, "); + pr_cont("PNA, "); } else { - printk(KERN_INFO "%s: NE2000 Compatible: ", dev->name); + netdev_info(dev, "NE2000 Compatible: "); } - printk("io %#3lx, irq %d,", dev->base_addr, dev->irq); + pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq); if (info->flags & USE_SHMEM) - printk (" mem %#5lx,", dev->mem_start); + pr_cont(" mem %#5lx,", dev->mem_start); if (info->flags & HAS_MISC_REG) - printk(" %s xcvr,", if_names[dev->if_port]); - printk(" hw_addr %pM\n", dev->dev_addr); + pr_cont(" %s xcvr,", if_names[dev->if_port]); + pr_cont(" hw_addr %pM\n", dev->dev_addr); return 0; failed: @@ -662,14 +636,6 @@ failed: return -ENODEV; } /* pcnet_config */ -/*====================================================================== - - After a card is removed, pcnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void pcnet_release(struct pcmcia_device *link) { pcnet_dev_t *info = PRIV(link->priv); @@ -682,15 +648,6 @@ static void pcnet_release(struct pcmcia_device *link) pcmcia_disable_device(link); } -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the net drivers from trying - to talk to the card any more. - -======================================================================*/ - static int pcnet_suspend(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -928,7 +885,7 @@ static void mii_phy_probe(struct net_device *dev) phyid = tmp << 16; phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2); phyid &= MII_PHYID_REV_MASK; - pr_debug("%s: MII at %d is 0x%08x\n", dev->name, i, phyid); + netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid); if (phyid == AM79C9XX_HOME_PHY) { info->pna_phy = i; } else if (phyid != AM79C9XX_ETH_PHY) { @@ -961,7 +918,7 @@ static int pcnet_open(struct net_device *dev) info->phy_id = info->eth_phy; info->link_status = 0x00; init_timer(&info->watchdog); - info->watchdog.function = &ei_watchdog; + info->watchdog.function = ei_watchdog; info->watchdog.data = (u_long)dev; info->watchdog.expires = jiffies + HZ; add_timer(&info->watchdog); @@ -1014,8 +971,8 @@ static void pcnet_reset_8390(struct net_device *dev) outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ if (i == 100) - printk(KERN_ERR "%s: pcnet_reset_8390() did not complete.\n", - dev->name); + netdev_err(dev, "pcnet_reset_8390() did not complete.\n"); + set_misc_reg(dev); } /* pcnet_reset_8390 */ @@ -1031,8 +988,7 @@ static int set_config(struct net_device *dev, struct ifmap *map) else if ((map->port < 1) || (map->port > 2)) return -EINVAL; dev->if_port = map->port; - printk(KERN_INFO "%s: switched to %s port\n", - dev->name, if_names[dev->if_port]); + netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); NS8390_init(dev, 1); } return 0; @@ -1067,7 +1023,7 @@ static void ei_watchdog(u_long arg) this, we can limp along even if the interrupt is blocked */ if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { if (!info->fast_poll) - printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name); + netdev_info(dev, "interrupt(s) dropped!\n"); ei_irq_wrapper(dev->irq, dev); info->fast_poll = HZ; } @@ -1087,7 +1043,7 @@ static void ei_watchdog(u_long arg) if (info->eth_phy) { info->phy_id = info->eth_phy = 0; } else { - printk(KERN_INFO "%s: MII is missing!\n", dev->name); + netdev_info(dev, "MII is missing!\n"); info->flags &= ~HAS_MII; } goto reschedule; @@ -1096,8 +1052,7 @@ static void ei_watchdog(u_long arg) link &= 0x0004; if (link != info->link_status) { u_short p = mdio_read(mii_addr, info->phy_id, 5); - printk(KERN_INFO "%s: %s link beat\n", dev->name, - (link) ? "found" : "lost"); + netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); if (link && (info->flags & IS_DL10022)) { /* Disable collision detection on full duplex links */ outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG); @@ -1108,13 +1063,12 @@ static void ei_watchdog(u_long arg) if (link) { if (info->phy_id == info->eth_phy) { if (p) - printk(KERN_INFO "%s: autonegotiation complete: " - "%sbaseT-%cD selected\n", dev->name, + netdev_info(dev, "autonegotiation complete: " + "%sbaseT-%cD selected\n", ((p & 0x0180) ? "100" : "10"), ((p & 0x0140) ? 'F' : 'H')); else - printk(KERN_INFO "%s: link partner did not " - "autonegotiate\n", dev->name); + netdev_info(dev, "link partner did not autonegotiate\n"); } NS8390_init(dev, 1); } @@ -1127,7 +1081,7 @@ static void ei_watchdog(u_long arg) /* isolate this MII and try flipping to the other one */ mdio_write(mii_addr, info->phy_id, 0, 0x0400); info->phy_id ^= info->pna_phy ^ info->eth_phy; - printk(KERN_INFO "%s: switched to %s transceiver\n", dev->name, + netdev_info(dev, "switched to %s transceiver\n", (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); mdio_write(mii_addr, info->phy_id, 0, (info->phy_id == info->eth_phy) ? 0x1000 : 0); @@ -1143,18 +1097,6 @@ reschedule: /*====================================================================*/ -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, "pcnet_cs"); -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, -}; - -/*====================================================================*/ - static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { @@ -1187,9 +1129,9 @@ static void dma_get_8390_hdr(struct net_device *dev, unsigned int nic_base = dev->base_addr; if (ei_status.dmaing) { - printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input." + netdev_notice(dev, "DMAing conflict in dma_block_input." "[DMAstat:%1x][irqlock:%1x]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } @@ -1220,11 +1162,11 @@ static void dma_block_input(struct net_device *dev, int count, char *buf = skb->data; if ((ei_debug > 4) && (count != 4)) - pr_debug("%s: [bi=%d]\n", dev->name, count+4); + netdev_dbg(dev, "[bi=%d]\n", count+4); if (ei_status.dmaing) { - printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input." + netdev_notice(dev, "DMAing conflict in dma_block_input." "[DMAstat:%1x][irqlock:%1x]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1254,9 +1196,9 @@ static void dma_block_input(struct net_device *dev, int count, break; } while (--tries > 0); if (tries <= 0) - printk(KERN_NOTICE "%s: RX transfer address mismatch," + netdev_notice(dev, "RX transfer address mismatch," "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, ring_offset + xfer_count, addr); + ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -1277,7 +1219,7 @@ static void dma_block_output(struct net_device *dev, int count, #ifdef PCMCIA_DEBUG if (ei_debug > 4) - printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count); + netdev_dbg(dev, "[bo=%d]\n", count); #endif /* Round the count up for word writes. Do we need to do this? @@ -1286,9 +1228,9 @@ static void dma_block_output(struct net_device *dev, int count, if (count & 0x01) count++; if (ei_status.dmaing) { - printk(KERN_NOTICE "%s: DMAing conflict in dma_block_output." + netdev_notice(dev, "DMAing conflict in dma_block_output." "[DMAstat:%1x][irqlock:%1x]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1325,9 +1267,9 @@ static void dma_block_output(struct net_device *dev, int count, break; } while (--tries > 0); if (tries <= 0) { - printk(KERN_NOTICE "%s: Tx packet transfer address mismatch," + netdev_notice(dev, "Tx packet transfer address mismatch," "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, (start_page << 8) + count, addr); + (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -1336,8 +1278,7 @@ static void dma_block_output(struct net_device *dev, int count, while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { - printk(KERN_NOTICE "%s: timeout waiting for Tx RDC.\n", - dev->name); + netdev_notice(dev, "timeout waiting for Tx RDC.\n"); pcnet_reset_8390(dev); NS8390_init(dev, 1); break; @@ -1361,9 +1302,9 @@ static int setup_dma_config(struct pcmcia_device *link, int start_pg, ei_status.stop_page = stop_pg; /* set up block i/o functions */ - ei_status.get_8390_hdr = &dma_get_8390_hdr; - ei_status.block_input = &dma_block_input; - ei_status.block_output = &dma_block_output; + ei_status.get_8390_hdr = dma_get_8390_hdr; + ei_status.block_input = dma_block_input; + ei_status.block_output = dma_block_output; return 0; } @@ -1459,7 +1400,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - win_req_t req; int i, window_size, offset, ret; window_size = (stop_pg - start_pg) << 8; @@ -1470,22 +1410,22 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, window_size = roundup_pow_of_two(window_size); /* Allocate a memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; req.Size = window_size; - req.AccessSpeed = mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; link->resource[3]->end = window_size; + ret = pcmcia_request_window(link, link->resource[3], mem_speed); if (ret) goto failed; offset = (start_pg << 8) + cm_offset; offset -= offset % window_size; - ret = pcmcia_map_mem_page(link, link->win, offset); + ret = pcmcia_map_mem_page(link, link->resource[3], offset); if (ret) goto failed; /* Try scribbling on the buffer */ - info->base = ioremap(req.Base, window_size); + info->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); for (i = 0; i < (TX_PAGES<<8); i += 2) __raw_writew((i>>1), info->base+offset+i); udelay(100); @@ -1494,24 +1434,25 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, pcnet_reset_8390(dev); if (i != (TX_PAGES<<8)) { iounmap(info->base); - pcmcia_release_window(link, link->win); - info->base = NULL; link->win = 0; + pcmcia_release_window(link, link->resource[3]); + info->base = NULL; goto failed; } ei_status.mem = info->base + offset; - ei_status.priv = req.Size; + ei_status.priv = resource_size(link->resource[3]); dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = dev->mem_start + req.Size; + dev->mem_end = dev->mem_start + resource_size(link->resource[3]); ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; - ei_status.stop_page = start_pg + ((req.Size - offset) >> 8); + ei_status.stop_page = start_pg + ( + (resource_size(link->resource[3]) - offset) >> 8); /* set up block i/o functions */ - ei_status.get_8390_hdr = &shmem_get_8390_hdr; - ei_status.block_input = &shmem_block_input; - ei_status.block_output = &shmem_block_output; + ei_status.get_8390_hdr = shmem_get_8390_hdr; + ei_status.block_input = shmem_block_input; + ei_status.block_output = shmem_block_output; info->flags |= USE_SHMEM; return 0; @@ -1637,6 +1578,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b), PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0), PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956), + PCMCIA_DEVICE_PROD_ID12("KENTRONICS", "KEP-230", 0xaf8144c9, 0x868f6616), PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64), PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5), PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3), @@ -1744,9 +1686,7 @@ MODULE_FIRMWARE("cis/PE-200.cis"); MODULE_FIRMWARE("cis/tamarack.cis"); static struct pcmcia_driver pcnet_driver = { - .drv = { - .name = "pcnet_cs", - }, + .name = "pcnet_cs", .probe = pcnet_probe, .remove = pcnet_detach, .owner = THIS_MODULE, diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 377367d03b4..8a9ff531892 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -25,6 +25,8 @@ ======================================================================*/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -44,7 +46,6 @@ #include <linux/jiffies.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -294,20 +295,12 @@ static const struct net_device_ops smc_netdev_ops = { .ndo_tx_timeout = smc_tx_timeout, .ndo_set_config = s9k_config, .ndo_set_multicast_list = set_rx_mode, - .ndo_do_ioctl = &smc_ioctl, + .ndo_do_ioctl = smc_ioctl, .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - smc91c92_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int smc91c92_probe(struct pcmcia_device *link) { struct smc_private *smc; @@ -324,10 +317,6 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; @@ -343,15 +332,6 @@ static int smc91c92_probe(struct pcmcia_device *link) return smc91c92_config(link); } /* smc91c92_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void smc91c92_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -412,26 +392,28 @@ static int mhz_3288_power(struct pcmcia_device *link) mdelay(200); /* Now read and write the COR... */ - tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR); + tmp = readb(smc->base + link->config_base + CISREG_COR); udelay(5); - writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR); + writeb(tmp, smc->base + link->config_base + CISREG_COR); return 0; } -static int mhz_mfc_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->io_lines = 16; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[1]->end = 8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; p_dev->resource[0]->start = k ^ 0x300; - p_dev->io_lines = 16; if (!pcmcia_request_io(p_dev)) return 0; } @@ -442,14 +424,11 @@ static int mhz_mfc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); - win_req_t req; unsigned int offset; int i; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->end = 8; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | + CONF_AUTO_SET_IO; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -459,16 +438,16 @@ static int mhz_mfc_config(struct pcmcia_device *link) dev->base_addr = link->resource[0]->start; /* Allocate a memory window, for accessing the ISR */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -ENODEV; - smc->base = ioremap(req.Base, req.Size); - offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0; - i = pcmcia_map_mem_page(link, link->win, offset); + smc->base = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); + offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; + i = pcmcia_map_mem_page(link, link->resource[2], offset); if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) @@ -591,14 +570,12 @@ static int mot_setup(struct pcmcia_device *link) /*====================================================================*/ -static int smc_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + return pcmcia_request_io(p_dev); } @@ -607,7 +584,8 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->resource[0]->end = 16; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -640,15 +618,14 @@ static int osi_config(struct pcmcia_device *link) static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int i, j; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; link->resource[0]->end = 64; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ - link->conf.ConfigIndex = 0x23; link->io_lines = 16; + link->config_index = 0x23; for (i = j = 0; j < 4; j++) { link->resource[1]->start = com[j]; @@ -658,7 +635,7 @@ static int osi_config(struct pcmcia_device *link) } if (i != 0) { /* Fallback: turn off hard decode */ - link->conf.ConfigIndex = 0x03; + link->config_index = 0x03; link->resource[1]->end = 0; i = pcmcia_request_io(link); } @@ -813,31 +790,20 @@ static int check_sig(struct pcmcia_device *link) ((s >> 8) != (s & 0xff))) { SMC_SELECT_BANK(3); s = inw(ioaddr + REVISION); - return (s & 0xff); + return s & 0xff; } if (width) { - modconf_t mod = { - .Attributes = CONF_IO_CHANGE_WIDTH, - }; - printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n"); + pr_info("using 8-bit IO window\n"); smc91c92_suspend(link); - pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_iowidth(link); smc91c92_resume(link); return check_sig(link); } return -ENODEV; } -/*====================================================================== - - smc91c92_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int smc91c92_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -869,7 +835,7 @@ static int smc91c92_config(struct pcmcia_device *link) i = pcmcia_request_irq(link, smc_interrupt); if (i) goto config_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i) goto config_failed; @@ -881,7 +847,7 @@ static int smc91c92_config(struct pcmcia_device *link) if ((if_port >= 0) && (if_port <= 2)) dev->if_port = if_port; else - printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n"); + dev_notice(&link->dev, "invalid if_port requested\n"); switch (smc->manfid) { case MANFID_OSITECH: @@ -899,7 +865,7 @@ static int smc91c92_config(struct pcmcia_device *link) } if (i != 0) { - printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n"); + dev_notice(&link->dev, "Unable to find hardware address.\n"); goto config_failed; } @@ -952,30 +918,28 @@ static int smc91c92_config(struct pcmcia_device *link) SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { - printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n"); + dev_err(&link->dev, "register_netdev() failed\n"); goto config_undo; } - printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, " - "hw_addr %pM\n", - dev->name, name, (rev & 0x0f), dev->base_addr, dev->irq, - dev->dev_addr); + netdev_info(dev, "smc91c%s rev %d: io %#3lx, irq %d, hw_addr %pM\n", + name, (rev & 0x0f), dev->base_addr, dev->irq, dev->dev_addr); if (rev > 0) { if (mir & 0x3ff) - printk(KERN_INFO " %lu byte", mir); + netdev_info(dev, " %lu byte", mir); else - printk(KERN_INFO " %lu kb", mir>>10); - printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ? - "MII" : if_names[dev->if_port]); + netdev_info(dev, " %lu kb", mir>>10); + pr_cont(" buffer, %s xcvr\n", + (smc->cfg & CFG_MII_SELECT) ? "MII" : if_names[dev->if_port]); } if (smc->cfg & CFG_MII_SELECT) { if (smc->mii_if.phy_id != -1) { - dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n", - smc->mii_if.phy_id, j); + netdev_dbg(dev, " MII transceiver at index %d, status %x\n", + smc->mii_if.phy_id, j); } else { - printk(KERN_NOTICE " No MII transceivers found!\n"); + netdev_notice(dev, " No MII transceivers found!\n"); } } return 0; @@ -988,18 +952,10 @@ config_failed: return -ENODEV; } /* smc91c92_config */ -/*====================================================================== - - After a card is removed, smc91c92_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void smc91c92_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "smc91c92_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); iounmap(smc->base); @@ -1081,10 +1037,10 @@ static void smc_dump(struct net_device *dev) save = inw(ioaddr + BANK_SELECT); for (w = 0; w < 4; w++) { SMC_SELECT_BANK(w); - printk(KERN_DEBUG "bank %d: ", w); + netdev_printk(KERN_DEBUG, dev, "bank %d: ", w); for (i = 0; i < 14; i += 2) - printk(" %04x", inw(ioaddr + i)); - printk("\n"); + pr_cont(" %04x", inw(ioaddr + i)); + pr_cont("\n"); } outw(save, ioaddr + BANK_SELECT); } @@ -1106,7 +1062,7 @@ static int smc_open(struct net_device *dev) return -ENODEV; /* Physical device present signature. */ if (check_sig(link) < 0) { - printk("smc91c92_cs: Yikes! Bad chip signature!\n"); + netdev_info(dev, "Yikes! Bad chip signature!\n"); return -ENODEV; } link->open++; @@ -1117,7 +1073,7 @@ static int smc_open(struct net_device *dev) smc_reset(dev); init_timer(&smc->media); - smc->media.function = &media_check; + smc->media.function = media_check; smc->media.data = (u_long) dev; smc->media.expires = jiffies + HZ; add_timer(&smc->media); @@ -1172,7 +1128,7 @@ static void smc_hardware_send_packet(struct net_device * dev) u_char packet_no; if (!skb) { - printk(KERN_ERR "%s: In XMIT with no packet to send.\n", dev->name); + netdev_err(dev, "In XMIT with no packet to send\n"); return; } @@ -1180,8 +1136,8 @@ static void smc_hardware_send_packet(struct net_device * dev) packet_no = inw(ioaddr + PNR_ARR) >> 8; if (packet_no & 0x80) { /* If not, there is a hardware problem! Likely an ejected card. */ - printk(KERN_WARNING "%s: 91c92 hardware Tx buffer allocation" - " failed, status %#2.2x.\n", dev->name, packet_no); + netdev_warn(dev, "hardware Tx buffer allocation failed, status %#2.2x\n", + packet_no); dev_kfree_skb_irq(skb); smc->saved_skb = NULL; netif_start_queue(dev); @@ -1200,8 +1156,7 @@ static void smc_hardware_send_packet(struct net_device * dev) u_char *buf = skb->data; u_int length = skb->len; /* The chip will pad to ethernet min. */ - pr_debug("%s: Trying to xmit packet of length %d.\n", - dev->name, length); + netdev_dbg(dev, "Trying to xmit packet of length %d\n", length); /* send the packet length: +6 for status word, length, and ctl */ outw(0, ioaddr + DATA_1); @@ -1233,9 +1188,8 @@ static void smc_tx_timeout(struct net_device *dev) struct smc_private *smc = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; - printk(KERN_NOTICE "%s: SMC91c92 transmit timed out, " - "Tx_status %2.2x status %4.4x.\n", - dev->name, inw(ioaddr)&0xff, inw(ioaddr + 2)); + netdev_notice(dev, "transmit timed out, Tx_status %2.2x status %4.4x.\n", + inw(ioaddr)&0xff, inw(ioaddr + 2)); dev->stats.tx_errors++; smc_reset(dev); dev->trans_start = jiffies; /* prevent tx timeout */ @@ -1254,14 +1208,14 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb, netif_stop_queue(dev); - pr_debug("%s: smc_start_xmit(length = %d) called," - " status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2)); + netdev_dbg(dev, "smc_start_xmit(length = %d) called, status %04x\n", + skb->len, inw(ioaddr + 2)); if (smc->saved_skb) { /* THIS SHOULD NEVER HAPPEN. */ dev->stats.tx_aborted_errors++; - printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n", - dev->name); + netdev_printk(KERN_DEBUG, dev, + "Internal error -- sent packet while busy\n"); return NETDEV_TX_BUSY; } smc->saved_skb = skb; @@ -1269,7 +1223,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb, num_pages = skb->len >> 8; if (num_pages > 7) { - printk(KERN_ERR "%s: Far too big packet error.\n", dev->name); + netdev_err(dev, "Far too big packet error: %d pages\n", num_pages); dev_kfree_skb (skb); smc->saved_skb = NULL; dev->stats.tx_dropped++; @@ -1339,8 +1293,7 @@ static void smc_tx_err(struct net_device * dev) } if (tx_status & TS_SUCCESS) { - printk(KERN_NOTICE "%s: Successful packet caused error " - "interrupt?\n", dev->name); + netdev_notice(dev, "Successful packet caused error interrupt?\n"); } /* re-enable transmit */ SMC_SELECT_BANK(0); @@ -1530,8 +1483,7 @@ static void smc_rx(struct net_device *dev) /* Assertion: we are in Window 2. */ if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) { - printk(KERN_ERR "%s: smc_rx() with nothing on Rx FIFO.\n", - dev->name); + netdev_err(dev, "smc_rx() with nothing on Rx FIFO\n"); return; } @@ -1646,8 +1598,7 @@ static int s9k_config(struct net_device *dev, struct ifmap *map) else if (map->port > 2) return -EINVAL; dev->if_port = map->port; - printk(KERN_INFO "%s: switched to %s port\n", - dev->name, if_names[dev->if_port]); + netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); smc_reset(dev); } return 0; @@ -1798,7 +1749,7 @@ static void media_check(u_long arg) this, we can limp along even if the interrupt is blocked */ if (smc->watchdog++ && ((i>>8) & i)) { if (!smc->fast_poll) - printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name); + netdev_info(dev, "interrupt(s) dropped!\n"); local_irq_save(flags); smc_interrupt(dev->irq, dev); local_irq_restore(flags); @@ -1822,7 +1773,7 @@ static void media_check(u_long arg) SMC_SELECT_BANK(3); link = mdio_read(dev, smc->mii_if.phy_id, 1); if (!link || (link == 0xffff)) { - printk(KERN_INFO "%s: MII is missing!\n", dev->name); + netdev_info(dev, "MII is missing!\n"); smc->mii_if.phy_id = -1; goto reschedule; } @@ -1830,15 +1781,13 @@ static void media_check(u_long arg) link &= 0x0004; if (link != smc->link_status) { u_short p = mdio_read(dev, smc->mii_if.phy_id, 5); - printk(KERN_INFO "%s: %s link beat\n", dev->name, - (link) ? "found" : "lost"); + netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40)) ? TCR_FDUPLX : 0); if (link) { - printk(KERN_INFO "%s: autonegotiation complete: " - "%sbaseT-%cD selected\n", dev->name, - ((p & 0x0180) ? "100" : "10"), - (smc->duplex ? 'F' : 'H')); + netdev_info(dev, "autonegotiation complete: " + "%dbaseT-%cD selected\n", + (p & 0x0180) ? 100 : 10, smc->duplex ? 'F' : 'H'); } SMC_SELECT_BANK(0); outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR); @@ -1857,25 +1806,23 @@ static void media_check(u_long arg) if (media != smc->media_status) { if ((media & smc->media_status & 1) && ((smc->media_status ^ media) & EPH_LINK_OK)) - printk(KERN_INFO "%s: %s link beat\n", dev->name, - (smc->media_status & EPH_LINK_OK ? "lost" : "found")); + netdev_info(dev, "%s link beat\n", + smc->media_status & EPH_LINK_OK ? "lost" : "found"); else if ((media & smc->media_status & 2) && ((smc->media_status ^ media) & EPH_16COL)) - printk(KERN_INFO "%s: coax cable %s\n", dev->name, - (media & EPH_16COL ? "problem" : "ok")); + netdev_info(dev, "coax cable %s\n", + media & EPH_16COL ? "problem" : "ok"); if (dev->if_port == 0) { if (media & 1) { if (media & EPH_LINK_OK) - printk(KERN_INFO "%s: flipped to 10baseT\n", - dev->name); + netdev_info(dev, "flipped to 10baseT\n"); else smc_set_xcvr(dev, 2); } else { if (media & EPH_16COL) smc_set_xcvr(dev, 1); else - printk(KERN_INFO "%s: flipped to 10base2\n", - dev->name); + netdev_info(dev, "flipped to 10base2\n"); } } smc->media_status = media; @@ -2101,9 +2048,7 @@ MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); static struct pcmcia_driver smc91c92_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "smc91c92_cs", - }, + .name = "smc91c92_cs", .probe = smc91c92_probe, .remove = smc91c92_detach, .id_table = smc91c92_ids, diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 4eb6f986703..a46b7fd6c0f 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -63,6 +63,8 @@ * OF THE POSSIBILITY OF SUCH DAMAGE. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -82,7 +84,6 @@ #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -210,13 +211,6 @@ enum xirc_cmd { /* Commands */ static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" }; - -#define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: " -#define KERR_XIRC KERN_ERR "xirc2ps_cs: " -#define KWRN_XIRC KERN_WARNING "xirc2ps_cs: " -#define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: " -#define KINF_XIRC KERN_INFO "xirc2ps_cs: " - /* card types */ #define XIR_UNKNOWN 0 /* unknown: not supported */ #define XIR_CE 1 /* (prodid 1) different hardware: not supported */ @@ -267,33 +261,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len); -/* - * The event() function is this driver's Card Services event handler. - * It will be called by Card Services when an appropriate card status - * event is received. The config() and release() entry points are - * used to configure or release a socket, in response to card insertion - * and ejection events. They are invoked from the event handler. - */ - static int has_ce2_string(struct pcmcia_device * link); static int xirc2ps_config(struct pcmcia_device * link); static void xirc2ps_release(struct pcmcia_device * link); - -/**************** - * The attach() and detach() entry points are used to create and destroy - * "instances" of the driver, where each instance represents everything - * needed to manage one actual PCMCIA card. - */ - static void xirc2ps_detach(struct pcmcia_device *p_dev); -/**************** - * You'll also need to prototype all the functions that will actually - * be used to talk to your device. See 'pcmem_cs' for a good example - * of a fully self-sufficient driver; the other drivers rely more or - * less on other parts of the kernel. - */ - static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); typedef struct local_info_t { @@ -350,26 +322,26 @@ PrintRegisters(struct net_device *dev) if (pc_debug > 1) { int i, page; - printk(KDBG_XIRC "Register common: "); + printk(KERN_DEBUG pr_fmt("Register common: ")); for (i = 0; i < 8; i++) - printk(" %2.2x", GetByte(i)); - printk("\n"); + pr_cont(" %2.2x", GetByte(i)); + pr_cont("\n"); for (page = 0; page <= 8; page++) { - printk(KDBG_XIRC "Register page %2x: ", page); + printk(KERN_DEBUG pr_fmt("Register page %2x: "), page); SelectPage(page); for (i = 8; i < 16; i++) - printk(" %2.2x", GetByte(i)); - printk("\n"); + pr_cont(" %2.2x", GetByte(i)); + pr_cont("\n"); } for (page=0x40 ; page <= 0x5f; page++) { if (page == 0x43 || (page >= 0x46 && page <= 0x4f) || (page >= 0x51 && page <=0x5e)) continue; - printk(KDBG_XIRC "Register page %2x: ", page); + printk(KERN_DEBUG pr_fmt("Register page %2x: "), page); SelectPage(page); for (i = 8; i < 16; i++) - printk(" %2.2x", GetByte(i)); - printk("\n"); + pr_cont(" %2.2x", GetByte(i)); + pr_cont("\n"); } } } @@ -501,16 +473,6 @@ static const struct net_device_ops netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/**************** - * xirc2ps_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a - * card insertion event. - */ - static int xirc2ps_probe(struct pcmcia_device *link) { @@ -529,9 +491,7 @@ xirc2ps_probe(struct pcmcia_device *link) link->priv = dev; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_index = 1; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; @@ -542,13 +502,6 @@ xirc2ps_probe(struct pcmcia_device *link) return xirc2ps_config(link); } /* xirc2ps_attach */ -/**************** - * This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void xirc2ps_detach(struct pcmcia_device *link) { @@ -608,11 +561,11 @@ set_card_type(struct pcmcia_device *link) local->modem = 0; local->card_type = XIR_UNKNOWN; if (!(prodid & 0x40)) { - printk(KNOT_XIRC "Ooops: Not a creditcard\n"); + pr_notice("Oops: Not a creditcard\n"); return 0; } if (!(mediaid & 0x01)) { - printk(KNOT_XIRC "Not an Ethernet card\n"); + pr_notice("Not an Ethernet card\n"); return 0; } if (mediaid & 0x10) { @@ -643,12 +596,11 @@ set_card_type(struct pcmcia_device *link) } } if (local->card_type == XIR_CE || local->card_type == XIR_CEM) { - printk(KNOT_XIRC "Sorry, this is an old CE card\n"); + pr_notice("Sorry, this is an old CE card\n"); return 0; } if (local->card_type == XIR_UNKNOWN) - printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n", - mediaid, prodid); + pr_notice("unknown card (mediaid=%02x prodid=%02x)\n", mediaid, prodid); return 1; } @@ -667,44 +619,53 @@ has_ce2_string(struct pcmcia_device * p_dev) } static int -xirc2ps_config_modem(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data) { unsigned int ioaddr; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = ioaddr; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 16; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } static int -xirc2ps_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data) { int *pass = priv_data; + resource_size_t tmp = p_dev->resource[1]->start; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = p_dev->resource[1]->start - + (*pass ? (cf->index & 0x20 ? -24:8) - : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8) + : (p_dev->config_index & 0x20 ? 8 : -24)); + + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + p_dev->resource[0]->end = 18; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[0]->start = tmp; + return pcmcia_request_io(p_dev); } @@ -727,11 +688,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, }; -/**************** - * xirc2ps_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * ethernet device available to the system. - */ static int xirc2ps_config(struct pcmcia_device * link) { @@ -748,7 +704,7 @@ xirc2ps_config(struct pcmcia_device * link) /* Is this a valid card */ if (link->has_manf_id == 0) { - printk(KNOT_XIRC "manfid not found in CIS\n"); + pr_notice("manfid not found in CIS\n"); goto failure; } @@ -770,14 +726,14 @@ xirc2ps_config(struct pcmcia_device * link) local->manf_str = "Toshiba"; break; default: - printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n", - (unsigned)link->manf_id); + pr_notice("Unknown Card Manufacturer ID: 0x%04x\n", + (unsigned)link->manf_id); goto failure; } dev_dbg(&link->dev, "found %s card\n", local->manf_str); if (!set_card_type(link)) { - printk(KNOT_XIRC "this card is not supported\n"); + pr_notice("this card is not supported\n"); goto failure; } @@ -803,44 +759,38 @@ xirc2ps_config(struct pcmcia_device * link) err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev); if (err) { - printk(KNOT_XIRC "node-id not found in CIS\n"); + pr_notice("node-id not found in CIS\n"); goto failure; } - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; if (local->modem) { int pass; + link->config_flags |= CONF_AUTO_SET_IO; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status |= CCSR_AUDIO_ENA; - } - link->resource[1]->end = 8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for * the Mako if (on the first pass) the COR bit 5 is set. */ for (pass=0; pass < 2; pass++) - if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass)) + if (!pcmcia_loop_config(link, xirc2ps_config_check, + &pass)) goto port_found; /* if special option: * try to configure as Ethernet only. * .... */ } - printk(KNOT_XIRC "no ports available\n"); + pr_notice("no ports available\n"); } else { link->io_lines = 10; link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { link->resource[0]->start = ioaddr; if (!(err = pcmcia_request_io(link))) @@ -861,16 +811,14 @@ xirc2ps_config(struct pcmcia_device * link) if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) goto config_error; - /**************** - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping. - */ - if ((err=pcmcia_request_configuration(link, &link->conf))) + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((err = pcmcia_enable_device(link))) goto config_error; if (local->dingo) { - win_req_t req; - /* Reset the modem's BAR to the correct value * This is necessary because in the RequestConfiguration call, * the base address of the ethernet port (BasePort1) is written @@ -890,14 +838,14 @@ xirc2ps_config(struct pcmcia_device * link) * is at 0x0800. So we allocate a window into the attribute * memory and write direct to the CIS registers */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - if ((err = pcmcia_request_window(link, &req, &link->win))) + link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + if ((err = pcmcia_request_window(link, link->resource[2], 0))) goto config_error; - local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; - if ((err = pcmcia_map_mem_page(link, link->win, 0))) + local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800; + if ((err = pcmcia_map_mem_page(link, link->resource[2], 0))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet @@ -911,24 +859,24 @@ xirc2ps_config(struct pcmcia_device * link) #if 0 { u_char tmp; - printk(KERN_INFO "ECOR:"); + pr_info("ECOR:"); for (i=0; i < 7; i++) { tmp = readb(local->dingo_ccr + i*2); - printk(" %02x", tmp); + pr_cont(" %02x", tmp); } - printk("\n"); - printk(KERN_INFO "DCOR:"); + pr_cont("\n"); + pr_info("DCOR:"); for (i=0; i < 4; i++) { tmp = readb(local->dingo_ccr + 0x20 + i*2); - printk(" %02x", tmp); + pr_cont(" %02x", tmp); } - printk("\n"); - printk(KERN_INFO "SCOR:"); + pr_cont("\n"); + pr_info("SCOR:"); for (i=0; i < 10; i++) { tmp = readb(local->dingo_ccr + 0x40 + i*2); - printk(" %02x", tmp); + pr_cont(" %02x", tmp); } - printk("\n"); + pr_cont("\n"); } #endif @@ -947,7 +895,7 @@ xirc2ps_config(struct pcmcia_device * link) (local->mohawk && if_port==4)) dev->if_port = if_port; else - printk(KNOT_XIRC "invalid if_port requested\n"); + pr_notice("invalid if_port requested\n"); /* we can now register the device with the net subsystem */ dev->irq = link->irq; @@ -959,14 +907,14 @@ xirc2ps_config(struct pcmcia_device * link) SET_NETDEV_DEV(dev, &link->dev); if ((err=register_netdev(dev))) { - printk(KNOT_XIRC "register_netdev() failed\n"); + pr_notice("register_netdev() failed\n"); goto config_error; } /* give some infos about the hardware */ - printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n", - dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq, - dev->dev_addr); + netdev_info(dev, "%s: port %#3lx, irq %d, hwaddr %pM\n", + local->manf_str, (u_long)dev->base_addr, (int)dev->irq, + dev->dev_addr); return 0; @@ -978,17 +926,12 @@ xirc2ps_config(struct pcmcia_device * link) return -ENODEV; } /* xirc2ps_config */ -/**************** - * After a card is removed, xirc2ps_release() will unregister the net - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void xirc2ps_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); if (local->dingo) @@ -1098,8 +1041,7 @@ xirc2ps_interrupt(int irq, void *dev_id) skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */ if (!skb) { - printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n", - pktlen); + pr_notice("low memory, packet dropped (size=%u)\n", pktlen); dev->stats.rx_dropped++; } else { /* okay get the packet */ skb_reserve(skb, 2); @@ -1268,7 +1210,7 @@ xirc_tx_timeout(struct net_device *dev) { local_info_t *lp = netdev_priv(dev); dev->stats.tx_errors++; - printk(KERN_NOTICE "%s: transmit timed out\n", dev->name); + netdev_notice(dev, "transmit timed out\n"); schedule_work(&lp->tx_timeout_task); } @@ -1435,8 +1377,7 @@ do_config(struct net_device *dev, struct ifmap *map) local->probe_port = 0; dev->if_port = map->port; } - printk(KERN_INFO "%s: switching to %s port\n", - dev->name, if_names[dev->if_port]); + netdev_info(dev, "switching to %s port\n", if_names[dev->if_port]); do_reset(dev,1); /* not the fine way :-) */ } return 0; @@ -1576,7 +1517,7 @@ do_reset(struct net_device *dev, int full) { SelectPage(0); value = GetByte(XIRCREG_ESR); /* read the ESR */ - printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value); + pr_debug("%s: ESR is: %#02x\n", dev->name, value); } #endif @@ -1626,13 +1567,12 @@ do_reset(struct net_device *dev, int full) if (full && local->mohawk && init_mii(dev)) { if (dev->if_port == 4 || local->dingo || local->new_mii) { - printk(KERN_INFO "%s: MII selected\n", dev->name); + netdev_info(dev, "MII selected\n"); SelectPage(2); PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08); msleep(20); } else { - printk(KERN_INFO "%s: MII detected; using 10mbs\n", - dev->name); + netdev_info(dev, "MII detected; using 10mbs\n"); SelectPage(0x42); if (dev->if_port == 2) /* enable 10Base2 */ PutByte(XIRCREG42_SWC1, 0xC0); @@ -1677,8 +1617,8 @@ do_reset(struct net_device *dev, int full) } if (full) - printk(KERN_INFO "%s: media %s, silicon revision %d\n", - dev->name, if_names[dev->if_port], local->silicon); + netdev_info(dev, "media %s, silicon revision %d\n", + if_names[dev->if_port], local->silicon); /* We should switch back to page 0 to avoid a bug in revision 0 * where regs with offset below 8 can't be read after an access * to the MAC registers */ @@ -1720,8 +1660,7 @@ init_mii(struct net_device *dev) control = mii_rd(ioaddr, 0, 0); if (control & 0x0400) { - printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n", - dev->name); + netdev_notice(dev, "can't take PHY out of isolation mode\n"); local->probe_port = 0; return 0; } @@ -1739,8 +1678,7 @@ init_mii(struct net_device *dev) } if (!(status & 0x0020)) { - printk(KERN_INFO "%s: autonegotiation failed;" - " using 10mbs\n", dev->name); + netdev_info(dev, "autonegotiation failed; using 10mbs\n"); if (!local->new_mii) { control = 0x0000; mii_wr(ioaddr, 0, 0, control, 16); @@ -1750,8 +1688,7 @@ init_mii(struct net_device *dev) } } else { linkpartner = mii_rd(ioaddr, 0, 5); - printk(KERN_INFO "%s: MII link partner: %04x\n", - dev->name, linkpartner); + netdev_info(dev, "MII link partner: %04x\n", linkpartner); if (linkpartner & 0x0080) { dev->if_port = 4; } else @@ -1830,9 +1767,7 @@ MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); static struct pcmcia_driver xirc2ps_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "xirc2ps_cs", - }, + .name = "xirc2ps_cs", .probe = xirc2ps_probe, .remove = xirc2ps_detach, .id_table = xirc2ps_ids, |