diff options
Diffstat (limited to 'drivers/net/phy/bcm7xxx.c')
| -rw-r--r-- | drivers/net/phy/bcm7xxx.c | 153 |
1 files changed, 116 insertions, 37 deletions
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index fdce1ea2879..1d211d36903 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/bitops.h> #include <linux/brcmphy.h> +#include <linux/mdio.h> /* Broadcom BCM7xxx internal PHY registers */ #define MII_BCM7XXX_CHANNEL_WIDTH 0x2000 @@ -146,15 +147,79 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev) return 0; } +static int bcm7xxx_apd_enable(struct phy_device *phydev) +{ + int val; + + /* Enable powering down of the DLL during auto-power down */ + val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3); + if (val < 0) + return val; + + val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; + bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val); + + /* Enable auto-power down */ + val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD); + if (val < 0) + return val; + + val |= BCM54XX_SHD_APD_EN; + return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val); +} + +static int bcm7xxx_eee_enable(struct phy_device *phydev) +{ + int val; + + val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + + /* Enable general EEE feature at the PHY level */ + val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; + + phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr, val); + + /* Advertise supported modes */ + val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, + MDIO_MMD_AN, phydev->addr); + + val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); + phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, + MDIO_MMD_AN, phydev->addr, val); + + return 0; +} + static int bcm7xxx_28nm_config_init(struct phy_device *phydev) { - int ret; + u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); + u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags); + int ret = 0; + + dev_info(&phydev->dev, "PHY revision: 0x%02x, patch: %d\n", rev, patch); + + switch (rev) { + case 0xa0: + case 0xb0: + ret = bcm7445_config_init(phydev); + break; + default: + ret = bcm7xxx_28nm_afe_config_init(phydev); + break; + } - ret = bcm7445_config_init(phydev); if (ret) return ret; - return bcm7xxx_28nm_afe_config_init(phydev); + ret = bcm7xxx_eee_enable(phydev); + if (ret) + return ret; + + return bcm7xxx_apd_enable(phydev); } static int bcm7xxx_28nm_resume(struct phy_device *phydev) @@ -201,8 +266,8 @@ static int bcm7xxx_config_init(struct phy_device *phydev) phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO); phy_read(phydev, MII_BCM7XXX_AUX_MODE); - /* Workaround only required for 100Mbits/sec */ - if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR)) + /* Workaround only required for 100Mbits/sec capable PHYs */ + if (phydev->supported & PHY_GBIT_FEATURES) return 0; /* set shadow mode 2 */ @@ -263,43 +328,53 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev) return 0; } +#define BCM7XXX_28NM_GPHY(_oui, _name) \ +{ \ + .phy_id = (_oui), \ + .phy_id_mask = 0xfffffff0, \ + .name = _name, \ + .features = PHY_GBIT_FEATURES | \ + SUPPORTED_Pause | SUPPORTED_Asym_Pause, \ + .flags = PHY_IS_INTERNAL, \ + .config_init = bcm7xxx_28nm_afe_config_init, \ + .config_aneg = genphy_config_aneg, \ + .read_status = genphy_read_status, \ + .resume = bcm7xxx_28nm_resume, \ + .driver = { .owner = THIS_MODULE }, \ +} + static struct phy_driver bcm7xxx_driver[] = { + BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"), { - .phy_id = PHY_ID_BCM7366, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM7366", - .features = PHY_GBIT_FEATURES | - SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_IS_INTERNAL, - .config_init = bcm7xxx_28nm_afe_config_init, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .resume = bcm7xxx_28nm_resume, - .driver = { .owner = THIS_MODULE }, -}, { - .phy_id = PHY_ID_BCM7439, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM7439", - .features = PHY_GBIT_FEATURES | + .phy_id = PHY_ID_BCM7425, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM7425", + .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_IS_INTERNAL, - .config_init = bcm7xxx_28nm_afe_config_init, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .resume = bcm7xxx_28nm_resume, - .driver = { .owner = THIS_MODULE }, + .flags = 0, + .config_init = bcm7xxx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = bcm7xxx_suspend, + .resume = bcm7xxx_config_init, + .driver = { .owner = THIS_MODULE }, }, { - .phy_id = PHY_ID_BCM7445, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM7445", - .features = PHY_GBIT_FEATURES | + .phy_id = PHY_ID_BCM7429, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM7429", + .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_IS_INTERNAL, - .config_init = bcm7xxx_28nm_config_init, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .resume = bcm7xxx_28nm_afe_config_init, - .driver = { .owner = THIS_MODULE }, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = bcm7xxx_suspend, + .resume = bcm7xxx_config_init, + .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_BCM_OUI_4, .phy_id_mask = 0xffff0000, @@ -329,7 +404,11 @@ static struct phy_driver bcm7xxx_driver[] = { } }; static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { + { PHY_ID_BCM7250, 0xfffffff0, }, + { PHY_ID_BCM7364, 0xfffffff0, }, { PHY_ID_BCM7366, 0xfffffff0, }, + { PHY_ID_BCM7425, 0xfffffff0, }, + { PHY_ID_BCM7429, 0xfffffff0, }, { PHY_ID_BCM7439, 0xfffffff0, }, { PHY_ID_BCM7445, 0xfffffff0, }, { PHY_BCM_OUI_4, 0xffff0000 }, |