diff options
Diffstat (limited to 'drivers/net/phy/broadcom.c')
| -rw-r--r-- | drivers/net/phy/broadcom.c | 216 |
1 files changed, 184 insertions, 32 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 4b4dc98ad16..190efc3301c 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -17,6 +17,8 @@ #include <linux/module.h> #include <linux/phy.h> +#define PHY_ID_BCM50610 0x0143bd60 + #define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ #define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ #define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ @@ -54,6 +56,21 @@ #define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) /* + * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) + */ +#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 +#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 +#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 + +#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 +#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 +#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 + +#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 + + +/* * Broadcom LED source encodings. These are used in BCM5461, BCM5481, * BCM5482, and possibly some others. */ @@ -88,6 +105,24 @@ #define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ /* + * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) + */ +#define MII_BCM54XX_EXP_AADJ1CH0 0x001f +#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200 +#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100 +#define MII_BCM54XX_EXP_AADJ1CH3 0x601f +#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002 +#define MII_BCM54XX_EXP_EXP08 0x0F08 +#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 +#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 +#define MII_BCM54XX_EXP_EXP75 0x0f75 +#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c +#define MII_BCM54XX_EXP_EXP96 0x0f96 +#define MII_BCM54XX_EXP_EXP96_MYST 0x0010 +#define MII_BCM54XX_EXP_EXP97 0x0f97 +#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c + +/* * BCM5482: Secondary SerDes registers */ #define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ @@ -128,40 +163,93 @@ static int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, u16 val) MII_BCM54XX_SHD_DATA(val)); } -/* - * Indirect register access functions for the Expansion Registers - * and Secondary SerDes registers (when sec_serdes=1). - */ -static int bcm54xx_exp_read(struct phy_device *phydev, - int sec_serdes, u8 regnum) +/* Indirect register access functions for the Expansion Registers */ +static int bcm54xx_exp_read(struct phy_device *phydev, u8 regnum) { int val; - phy_write(phydev, MII_BCM54XX_EXP_SEL, - (sec_serdes ? MII_BCM54XX_EXP_SEL_SSD : - MII_BCM54XX_EXP_SEL_ER) | - regnum); + val = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); + if (val < 0) + return val; + val = phy_read(phydev, MII_BCM54XX_EXP_DATA); - phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); + + /* Restore default value. It's O.K. if this write fails. */ + phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); return val; } -static int bcm54xx_exp_write(struct phy_device *phydev, - int sec_serdes, u8 regnum, u16 val) +static int bcm54xx_exp_write(struct phy_device *phydev, u16 regnum, u16 val) { int ret; - phy_write(phydev, MII_BCM54XX_EXP_SEL, - (sec_serdes ? MII_BCM54XX_EXP_SEL_SSD : - MII_BCM54XX_EXP_SEL_ER) | - regnum); + ret = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); + if (ret < 0) + return ret; + ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val); - phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); + + /* Restore default value. It's O.K. if this write fails. */ + phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); return ret; } +static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) +{ + return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); +} + +static int bcm50610_a0_workaround(struct phy_device *phydev) +{ + int err; + + err = bcm54xx_auxctl_write(phydev, + MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL, + MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA | + MII_BCM54XX_AUXCTL_ACTL_TX_6DB); + if (err < 0) + return err; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08, + MII_BCM54XX_EXP_EXP08_RJCT_2MHZ | + MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0, + MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN | + MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3, + MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, + MII_BCM54XX_EXP_EXP75_VDACCTRL); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96, + MII_BCM54XX_EXP_EXP96_MYST); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97, + MII_BCM54XX_EXP_EXP97_MYST); + +error: + bcm54xx_auxctl_write(phydev, + MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL, + MII_BCM54XX_AUXCTL_ACTL_TX_6DB); + + return err; +} + static int bcm54xx_config_init(struct phy_device *phydev) { int reg, err; @@ -183,6 +271,13 @@ static int bcm54xx_config_init(struct phy_device *phydev) err = phy_write(phydev, MII_BCM54XX_IMR, reg); if (err < 0) return err; + + if (phydev->drv->phy_id == PHY_ID_BCM50610) { + err = bcm50610_a0_workaround(phydev); + if (err < 0) + return err; + } + return 0; } @@ -205,18 +300,27 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Enable SGMII slave mode and auto-detection */ - reg = bcm54xx_exp_read(phydev, 1, BCM5482_SSD_SGMII_SLAVE); - bcm54xx_exp_write(phydev, 1, BCM5482_SSD_SGMII_SLAVE, - reg | - BCM5482_SSD_SGMII_SLAVE_EN | - BCM5482_SSD_SGMII_SLAVE_AD); + reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD; + err = bcm54xx_exp_read(phydev, reg); + if (err < 0) + return err; + err = bcm54xx_exp_write(phydev, reg, err | + BCM5482_SSD_SGMII_SLAVE_EN | + BCM5482_SSD_SGMII_SLAVE_AD); + if (err < 0) + return err; /* * Disable secondary SerDes powerdown */ - reg = bcm54xx_exp_read(phydev, 1, BCM5482_SSD_1000BX_CTL); - bcm54xx_exp_write(phydev, 1, BCM5482_SSD_1000BX_CTL, - reg & ~BCM5482_SSD_1000BX_CTL_PWRDOWN); + reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD; + err = bcm54xx_exp_read(phydev, reg); + if (err < 0) + return err; + err = bcm54xx_exp_write(phydev, reg, + err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN); + if (err < 0) + return err; /* * Select 1000BASE-X register set (primary SerDes) @@ -335,7 +439,8 @@ static struct phy_driver bcm5411_driver = { .phy_id = 0x00206070, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5411", - .features = PHY_GBIT_FEATURES, + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, @@ -349,7 +454,8 @@ static struct phy_driver bcm5421_driver = { .phy_id = 0x002060e0, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5421", - .features = PHY_GBIT_FEATURES, + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, @@ -363,7 +469,8 @@ static struct phy_driver bcm5461_driver = { .phy_id = 0x002060c0, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5461", - .features = PHY_GBIT_FEATURES, + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, @@ -377,7 +484,8 @@ static struct phy_driver bcm5464_driver = { .phy_id = 0x002060b0, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5464", - .features = PHY_GBIT_FEATURES, + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, @@ -391,7 +499,8 @@ static struct phy_driver bcm5481_driver = { .phy_id = 0x0143bca0, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5481", - .features = PHY_GBIT_FEATURES, + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = bcm5481_config_aneg, @@ -405,7 +514,8 @@ static struct phy_driver bcm5482_driver = { .phy_id = 0x0143bcb0, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5482", - .features = PHY_GBIT_FEATURES, + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm5482_config_init, .config_aneg = genphy_config_aneg, @@ -415,6 +525,36 @@ static struct phy_driver bcm5482_driver = { .driver = { .owner = THIS_MODULE }, }; +static struct phy_driver bcm50610_driver = { + .phy_id = PHY_ID_BCM50610, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM50610", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm54xx_ack_interrupt, + .config_intr = bcm54xx_config_intr, + .driver = { .owner = THIS_MODULE }, +}; + +static struct phy_driver bcm57780_driver = { + .phy_id = 0x03625d90, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM57780", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm54xx_ack_interrupt, + .config_intr = bcm54xx_config_intr, + .driver = { .owner = THIS_MODULE }, +}; + static int __init broadcom_init(void) { int ret; @@ -437,8 +577,18 @@ static int __init broadcom_init(void) ret = phy_driver_register(&bcm5482_driver); if (ret) goto out_5482; + ret = phy_driver_register(&bcm50610_driver); + if (ret) + goto out_50610; + ret = phy_driver_register(&bcm57780_driver); + if (ret) + goto out_57780; return ret; +out_57780: + phy_driver_unregister(&bcm50610_driver); +out_50610: + phy_driver_unregister(&bcm5482_driver); out_5482: phy_driver_unregister(&bcm5481_driver); out_5481: @@ -455,6 +605,8 @@ out_5411: static void __exit broadcom_exit(void) { + phy_driver_unregister(&bcm57780_driver); + phy_driver_unregister(&bcm50610_driver); phy_driver_unregister(&bcm5482_driver); phy_driver_unregister(&bcm5481_driver); phy_driver_unregister(&bcm5464_driver); |