diff options
Diffstat (limited to 'drivers/net/phy/broadcom.c')
| -rw-r--r-- | drivers/net/phy/broadcom.c | 119 |
1 files changed, 118 insertions, 1 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 7e935924793..fd4fc66b6d6 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -17,6 +17,8 @@ #include <linux/module.h> #include <linux/phy.h> +#define PHY_ID_BCM50610 0x0143bd60 + #define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ #define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ #define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ @@ -54,6 +56,21 @@ #define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) /* + * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) + */ +#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 +#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 +#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 + +#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 +#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 +#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 + +#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 + + +/* * Broadcom LED source encodings. These are used in BCM5461, BCM5481, * BCM5482, and possibly some others. */ @@ -88,6 +105,24 @@ #define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ /* + * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) + */ +#define MII_BCM54XX_EXP_AADJ1CH0 0x001f +#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200 +#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100 +#define MII_BCM54XX_EXP_AADJ1CH3 0x601f +#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002 +#define MII_BCM54XX_EXP_EXP08 0x0F08 +#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 +#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 +#define MII_BCM54XX_EXP_EXP75 0x0f75 +#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c +#define MII_BCM54XX_EXP_EXP96 0x0f96 +#define MII_BCM54XX_EXP_EXP96_MYST 0x0010 +#define MII_BCM54XX_EXP_EXP97 0x0f97 +#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c + +/* * BCM5482: Secondary SerDes registers */ #define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ @@ -145,7 +180,7 @@ static int bcm54xx_exp_read(struct phy_device *phydev, u8 regnum) return val; } -static int bcm54xx_exp_write(struct phy_device *phydev, u8 regnum, u16 val) +static int bcm54xx_exp_write(struct phy_device *phydev, u16 regnum, u16 val) { int ret; @@ -161,6 +196,60 @@ static int bcm54xx_exp_write(struct phy_device *phydev, u8 regnum, u16 val) return ret; } +static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) +{ + return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); +} + +static int bcm50610_a0_workaround(struct phy_device *phydev) +{ + int err; + + err = bcm54xx_auxctl_write(phydev, + MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL, + MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA | + MII_BCM54XX_AUXCTL_ACTL_TX_6DB); + if (err < 0) + return err; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08, + MII_BCM54XX_EXP_EXP08_RJCT_2MHZ | + MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0, + MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN | + MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3, + MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, + MII_BCM54XX_EXP_EXP75_VDACCTRL); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96, + MII_BCM54XX_EXP_EXP96_MYST); + if (err < 0) + goto error; + + err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97, + MII_BCM54XX_EXP_EXP97_MYST); + +error: + bcm54xx_auxctl_write(phydev, + MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL, + MII_BCM54XX_AUXCTL_ACTL_TX_6DB); + + return err; +} + static int bcm54xx_config_init(struct phy_device *phydev) { int reg, err; @@ -182,6 +271,13 @@ static int bcm54xx_config_init(struct phy_device *phydev) err = phy_write(phydev, MII_BCM54XX_IMR, reg); if (err < 0) return err; + + if (phydev->drv->phy_id == PHY_ID_BCM50610) { + err = bcm50610_a0_workaround(phydev); + if (err < 0) + return err; + } + return 0; } @@ -429,6 +525,21 @@ static struct phy_driver bcm5482_driver = { .driver = { .owner = THIS_MODULE }, }; +static struct phy_driver bcm50610_driver = { + .phy_id = PHY_ID_BCM50610, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM50610", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm54xx_ack_interrupt, + .config_intr = bcm54xx_config_intr, + .driver = { .owner = THIS_MODULE }, +}; + static int __init broadcom_init(void) { int ret; @@ -451,8 +562,13 @@ static int __init broadcom_init(void) ret = phy_driver_register(&bcm5482_driver); if (ret) goto out_5482; + ret = phy_driver_register(&bcm50610_driver); + if (ret) + goto out_50610; return ret; +out_50610: + phy_driver_unregister(&bcm5482_driver); out_5482: phy_driver_unregister(&bcm5481_driver); out_5481: @@ -469,6 +585,7 @@ out_5411: static void __exit broadcom_exit(void) { + phy_driver_unregister(&bcm50610_driver); phy_driver_unregister(&bcm5482_driver); phy_driver_unregister(&bcm5481_driver); phy_driver_unregister(&bcm5464_driver); |