diff options
Diffstat (limited to 'drivers/net/phy/icplus.c')
| -rw-r--r-- | drivers/net/phy/icplus.c | 19 |
1 files changed, 18 insertions, 1 deletions
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index f08c85acf76..47f8e893926 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -40,6 +40,9 @@ MODULE_LICENSE("GPL"); #define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ +#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ +#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */ +#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED static int ip175c_config_init(struct phy_device *phydev) { @@ -135,6 +138,11 @@ static int ip1001_config_init(struct phy_device *phydev) if (c < 0) return c; + /* INTR pin used: speed/link/duplex will cause an interrupt */ + c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT); + if (c < 0) + return c; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { /* Additional delay (2ns) used to adjust RX clock phase * at RGMII interface */ @@ -185,6 +193,15 @@ static int ip175c_config_aneg(struct phy_device *phydev) return 0; } +static int ip101a_g_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS); + if (err < 0) + return err; + + return 0; +} + static struct phy_driver ip175c_driver = { .phy_id = 0x02430d80, .name = "ICPlus IP175C", @@ -204,7 +221,6 @@ static struct phy_driver ip1001_driver = { .phy_id_mask = 0x0ffffff0, .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_HAS_INTERRUPT, .config_init = &ip1001_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, @@ -220,6 +236,7 @@ static struct phy_driver ip101a_g_driver = { .features = PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_INTERRUPT, + .ack_interrupt = ip101a_g_ack_interrupt, .config_init = &ip101a_g_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, |