diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 38 |
1 files changed, 33 insertions, 5 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index fd0ea7c50ee..8c2a29a9bd7 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -26,6 +26,7 @@ #include <linux/phy.h> #include <linux/micrel_phy.h> #include <linux/of.h> +#include <linux/clk.h> /* Operation Mode Strap Override */ #define MII_KSZPHY_OMSO 0x16 @@ -72,9 +73,12 @@ static int ksz_config_flags(struct phy_device *phydev) { int regval; - if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { + if (phydev->dev_flags & (MICREL_PHY_50MHZ_CLK | MICREL_PHY_25MHZ_CLK)) { regval = phy_read(phydev, MII_KSZPHY_CTRL); - regval |= KSZ8051_RMII_50MHZ_CLK; + if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) + regval |= KSZ8051_RMII_50MHZ_CLK; + else + regval &= ~KSZ8051_RMII_50MHZ_CLK; return phy_write(phydev, MII_KSZPHY_CTRL, regval); } return 0; @@ -194,8 +198,10 @@ static int ksz8021_config_init(struct phy_device *phydev) if (rc) dev_err(&phydev->dev, "failed to set led mode\n"); - phy_write(phydev, MII_KSZPHY_OMSO, val); rc = ksz_config_flags(phydev); + if (rc < 0) + return rc; + rc = phy_write(phydev, MII_KSZPHY_OMSO, val); return rc < 0 ? rc : 0; } @@ -440,6 +446,27 @@ ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum, { } +static int ksz8021_probe(struct phy_device *phydev) +{ + struct clk *clk; + + clk = devm_clk_get(&phydev->dev, "rmii-ref"); + if (!IS_ERR(clk)) { + unsigned long rate = clk_get_rate(clk); + + if (rate > 24500000 && rate < 25500000) { + phydev->dev_flags |= MICREL_PHY_25MHZ_CLK; + } else if (rate > 49500000 && rate < 50500000) { + phydev->dev_flags |= MICREL_PHY_50MHZ_CLK; + } else { + dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate); + return -EINVAL; + } + } + + return 0; +} + static struct phy_driver ksphy_driver[] = { { .phy_id = PHY_ID_KS8737, @@ -462,6 +489,7 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .probe = ksz8021_probe, .config_init = ksz8021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -477,6 +505,7 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .probe = ksz8021_probe, .config_init = ksz8021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -592,8 +621,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id = PHY_ID_KSZ9031, .phy_id_mask = 0x00fffff0, .name = "Micrel KSZ9031 Gigabit PHY", - .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause - | SUPPORTED_Asym_Pause), + .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = ksz9031_config_init, .config_aneg = genphy_config_aneg, |