diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 106 |
1 files changed, 105 insertions, 1 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index d849684231c..bc7c7d2f75f 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -283,6 +283,110 @@ static int ksz9021_config_init(struct phy_device *phydev) return 0; } +#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d +#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e +#define OP_DATA 1 +#define KSZ9031_PS_TO_REG 60 + +/* Extended registers */ +#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4 +#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5 +#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6 +#define MII_KSZ9031RN_CLK_PAD_SKEW 8 + +static int ksz9031_extended_write(struct phy_device *phydev, + u8 mode, u32 dev_addr, u32 regnum, u16 val) +{ + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr); + phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum); + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr); + return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val); +} + +static int ksz9031_extended_read(struct phy_device *phydev, + u8 mode, u32 dev_addr, u32 regnum) +{ + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr); + phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum); + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr); + return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG); +} + +static int ksz9031_of_load_skew_values(struct phy_device *phydev, + struct device_node *of_node, + u16 reg, size_t field_sz, + char *field[], u8 numfields) +{ + int val[4] = {-1, -2, -3, -4}; + int matches = 0; + u16 mask; + u16 maxval; + u16 newval; + int i; + + for (i = 0; i < numfields; i++) + if (!of_property_read_u32(of_node, field[i], val + i)) + matches++; + + if (!matches) + return 0; + + if (matches < numfields) + newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg); + else + newval = 0; + + maxval = (field_sz == 4) ? 0xf : 0x1f; + for (i = 0; i < numfields; i++) + if (val[i] != -(i + 1)) { + mask = 0xffff; + mask ^= maxval << (field_sz * i); + newval = (newval & mask) | + (((val[i] / KSZ9031_PS_TO_REG) & maxval) + << (field_sz * i)); + } + + return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval); +} + +static int ksz9031_config_init(struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct device_node *of_node = dev->of_node; + char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"}; + char *rx_data_skews[4] = { + "rxd0-skew-ps", "rxd1-skew-ps", + "rxd2-skew-ps", "rxd3-skew-ps" + }; + char *tx_data_skews[4] = { + "txd0-skew-ps", "txd1-skew-ps", + "txd2-skew-ps", "txd3-skew-ps" + }; + char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"}; + + if (!of_node && dev->parent->of_node) + of_node = dev->parent->of_node; + + if (of_node) { + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_CLK_PAD_SKEW, 5, + clk_skews, 2); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_CONTROL_PAD_SKEW, 4, + control_skews, 2); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4, + rx_data_skews, 4); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, + tx_data_skews, 4); + } + return 0; +} + #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6) #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4) @@ -469,7 +573,7 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = ksz9031_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, |