diff options
Diffstat (limited to 'drivers/net/phy/phy_device.c')
| -rw-r--r-- | drivers/net/phy/phy_device.c | 65 |
1 files changed, 56 insertions, 9 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 4987a1c6dc5..22c57be4dfa 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -33,6 +33,7 @@ #include <linux/mdio.h> #include <linux/io.h> #include <linux/uaccess.h> +#include <linux/of.h> #include <asm/irq.h> @@ -354,7 +355,7 @@ int phy_device_register(struct phy_device *phydev) phydev->bus->phy_map[phydev->addr] = phydev; /* Run all of the fixups for this PHY */ - err = phy_init_hw(phydev); + err = phy_scan_fixups(phydev); if (err) { pr_err("PHY %d failed to initialize\n", phydev->addr); goto out; @@ -574,6 +575,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface) { struct device *d = &phydev->dev; + struct module *bus_module; int err; /* Assume that if there is no driver, that it doesn't @@ -598,6 +600,14 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, return -EBUSY; } + /* Increment the bus module reference count */ + bus_module = phydev->bus->dev.driver ? + phydev->bus->dev.driver->owner : NULL; + if (!try_module_get(bus_module)) { + dev_err(&dev->dev, "failed to get the bus module\n"); + return -EIO; + } + phydev->attached_dev = dev; dev->phydev = phydev; @@ -663,6 +673,10 @@ EXPORT_SYMBOL(phy_attach); void phy_detach(struct phy_device *phydev) { int i; + + if (phydev->bus->dev.driver) + module_put(phydev->bus->dev.driver->owner); + phydev->attached_dev->phydev = NULL; phydev->attached_dev = NULL; phy_suspend(phydev); @@ -1067,14 +1081,11 @@ int genphy_soft_reset(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_soft_reset); -static int genphy_config_init(struct phy_device *phydev) +int genphy_config_init(struct phy_device *phydev) { int val; u32 features; - /* For now, I'll claim that the generic driver supports - * all possible port types - */ features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | SUPPORTED_FIBRE | SUPPORTED_BNC); @@ -1107,8 +1118,8 @@ static int genphy_config_init(struct phy_device *phydev) features |= SUPPORTED_1000baseT_Half; } - phydev->supported = features; - phydev->advertising = features; + phydev->supported &= features; + phydev->advertising &= features; return 0; } @@ -1118,6 +1129,7 @@ static int gen10g_soft_reset(struct phy_device *phydev) /* Do nothing for now */ return 0; } +EXPORT_SYMBOL(genphy_config_init); static int gen10g_config_init(struct phy_device *phydev) { @@ -1168,6 +1180,38 @@ static int gen10g_resume(struct phy_device *phydev) return 0; } +static void of_set_phy_supported(struct phy_device *phydev) +{ + struct device_node *node = phydev->dev.of_node; + u32 max_speed; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return; + + if (!node) + return; + + if (!of_property_read_u32(node, "max-speed", &max_speed)) { + /* The default values for phydev->supported are provided by the PHY + * driver "features" member, we want to reset to sane defaults fist + * before supporting higher speeds. + */ + phydev->supported &= PHY_DEFAULT_FEATURES; + + switch (max_speed) { + default: + return; + + case SPEED_1000: + phydev->supported |= PHY_1000BT_FEATURES; + case SPEED_100: + phydev->supported |= PHY_100BT_FEATURES; + case SPEED_10: + phydev->supported |= PHY_10BT_FEATURES; + } + } +} + /** * phy_probe - probe and init a PHY device * @dev: device to probe and init @@ -1202,7 +1246,8 @@ static int phy_probe(struct device *dev) * or both of these values */ phydev->supported = phydrv->features; - phydev->advertising = phydrv->features; + of_set_phy_supported(phydev); + phydev->advertising = phydev->supported; /* Set the state to READY by default */ phydev->state = PHY_READY; @@ -1295,7 +1340,9 @@ static struct phy_driver genphy_driver[] = { .name = "Generic PHY", .soft_reset = genphy_soft_reset, .config_init = genphy_config_init, - .features = 0, + .features = PHY_GBIT_FEATURES | SUPPORTED_MII | + SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC, .config_aneg = genphy_config_aneg, .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, |