diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-gpio.c | 9 | ||||
| -rw-r--r-- | drivers/net/phy/micrel.c | 24 | ||||
| -rw-r--r-- | drivers/net/phy/phy.c | 8 |
4 files changed, 25 insertions, 17 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 35fda5ac812..392a6c4b72e 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -77,7 +77,6 @@ config NATIONAL_PHY Currently supports the DP83865 PHY. config STE10XP - depends on PHYLIB tristate "Driver for STMicroelectronics STe10Xp PHYs" ---help--- This is the driver for the STe100p and STe101p PHYs. diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index f62c7b717bc..47c8339a035 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -188,8 +188,7 @@ static int __devexit mdio_gpio_remove(struct platform_device *pdev) #ifdef CONFIG_OF_GPIO -static int __devinit mdio_ofgpio_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int __devinit mdio_ofgpio_probe(struct platform_device *ofdev) { struct mdio_gpio_platform_data *pdata; struct mii_bus *new_bus; @@ -240,7 +239,7 @@ static struct of_device_id mdio_ofgpio_match[] = { }; MODULE_DEVICE_TABLE(of, mdio_ofgpio_match); -static struct of_platform_driver mdio_ofgpio_driver = { +static struct platform_driver mdio_ofgpio_driver = { .driver = { .name = "mdio-gpio", .owner = THIS_MODULE, @@ -252,12 +251,12 @@ static struct of_platform_driver mdio_ofgpio_driver = { static inline int __init mdio_ofgpio_init(void) { - return of_register_platform_driver(&mdio_ofgpio_driver); + return platform_driver_register(&mdio_ofgpio_driver); } static inline void __exit mdio_ofgpio_exit(void) { - of_unregister_platform_driver(&mdio_ofgpio_driver); + platform_driver_unregister(&mdio_ofgpio_driver); } #else static inline int __init mdio_ofgpio_init(void) { return 0; } diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 0fd1678bc5a..590f902deb6 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -19,13 +19,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/phy.h> - -#define PHY_ID_KSZ9021 0x00221611 -#define PHY_ID_KS8737 0x00221720 -#define PHY_ID_KS8041 0x00221510 -#define PHY_ID_KS8051 0x00221550 -/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */ -#define PHY_ID_KS8001 0x0022161A +#include <linux/micrel_phy.h> /* general Interrupt control/status reg in vendor specific block. */ #define MII_KSZPHY_INTCS 0x1B @@ -46,6 +40,7 @@ #define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9) #define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14) #define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) +#define KSZ8051_RMII_50MHZ_CLK (1 << 7) static int kszphy_ack_interrupt(struct phy_device *phydev) { @@ -106,6 +101,19 @@ static int kszphy_config_init(struct phy_device *phydev) return 0; } +static int ks8051_config_init(struct phy_device *phydev) +{ + int regval; + + if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { + regval = phy_read(phydev, MII_KSZPHY_CTRL); + regval |= KSZ8051_RMII_50MHZ_CLK; + phy_write(phydev, MII_KSZPHY_CTRL, regval); + } + + return 0; +} + static struct phy_driver ks8737_driver = { .phy_id = PHY_ID_KS8737, .phy_id_mask = 0x00fffff0, @@ -142,7 +150,7 @@ static struct phy_driver ks8051_driver = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = ks8051_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index a8445c72fc1..f7670330f98 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -319,7 +319,8 @@ int phy_mii_ioctl(struct phy_device *phydev, /* fall through */ case SIOCGMIIREG: - mii_data->val_out = phy_read(phydev, mii_data->reg_num); + mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id, + mii_data->reg_num); break; case SIOCSMIIREG: @@ -350,8 +351,9 @@ int phy_mii_ioctl(struct phy_device *phydev, } } - phy_write(phydev, mii_data->reg_num, val); - + mdiobus_write(phydev->bus, mii_data->phy_id, + mii_data->reg_num, val); + if (mii_data->reg_num == MII_BMCR && val & BMCR_RESET && phydev->drv->config_init) { |