summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig5
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/bcm63xx.c8
-rw-r--r--drivers/net/phy/broadcom.c16
-rw-r--r--drivers/net/phy/cicada.c9
-rw-r--r--drivers/net/phy/davicom.c10
-rw-r--r--drivers/net/phy/et1011c.c8
-rw-r--r--drivers/net/phy/fixed.c1
-rw-r--r--drivers/net/phy/icplus.c8
-rw-r--r--drivers/net/phy/lxt.c9
-rw-r--r--drivers/net/phy/marvell.c14
-rw-r--r--drivers/net/phy/mdio-bitbang.c61
-rw-r--r--drivers/net/phy/mdio-octeon.c1
-rw-r--r--drivers/net/phy/mdio_bus.c4
-rw-r--r--drivers/net/phy/micrel.c113
-rw-r--r--drivers/net/phy/national.c7
-rw-r--r--drivers/net/phy/phy.c1
-rw-r--r--drivers/net/phy/phy_device.c12
-rw-r--r--drivers/net/phy/qsemi.c8
-rw-r--r--drivers/net/phy/realtek.c7
-rw-r--r--drivers/net/phy/smsc.c11
-rw-r--r--drivers/net/phy/ste10Xp.c8
-rw-r--r--drivers/net/phy/vitesse.c8
23 files changed, 310 insertions, 20 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index fc5938ba3d7..a527e37728c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -88,6 +88,11 @@ config LSI_ET1011C_PHY
---help---
Supports the LSI ET1011C PHY.
+config MICREL_PHY
+ tristate "Driver for Micrel PHYs"
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 1342585af38..13bebab65d0 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
+obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 4fed95e8350..c1281567983 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -130,3 +130,11 @@ static void __exit bcm63xx_phy_exit(void)
module_init(bcm63xx_phy_init);
module_exit(bcm63xx_phy_exit);
+
+static struct mdio_device_id bcm63xx_tbl[] = {
+ { 0x00406000, 0xfffffc00 },
+ { 0x002bdc00, 0xfffffc00 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, bcm63xx_tbl);
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f482fc4f8cf..cecdbbd549e 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -908,3 +908,19 @@ static void __exit broadcom_exit(void)
module_init(broadcom_init);
module_exit(broadcom_exit);
+
+static struct mdio_device_id broadcom_tbl[] = {
+ { 0x00206070, 0xfffffff0 },
+ { 0x002060e0, 0xfffffff0 },
+ { 0x002060c0, 0xfffffff0 },
+ { 0x002060b0, 0xfffffff0 },
+ { 0x0143bca0, 0xfffffff0 },
+ { 0x0143bcb0, 0xfffffff0 },
+ { PHY_ID_BCM50610, 0xfffffff0 },
+ { PHY_ID_BCM50610M, 0xfffffff0 },
+ { PHY_ID_BCM57780, 0xfffffff0 },
+ { PHY_ID_BCMAC131, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, broadcom_tbl);
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index a1bd599c8a5..1a325d63756 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -17,7 +17,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -159,3 +158,11 @@ static void __exit cicada_exit(void)
module_init(cicada_init);
module_exit(cicada_exit);
+
+static struct mdio_device_id cicada_tbl[] = {
+ { 0x000fc410, 0x000ffff0 },
+ { 0x000fc440, 0x000fffc0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, cicada_tbl);
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index d926168bc78..29c17617a2e 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -17,7 +17,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -219,3 +218,12 @@ static void __exit davicom_exit(void)
module_init(davicom_init);
module_exit(davicom_exit);
+
+static struct mdio_device_id davicom_tbl[] = {
+ { 0x0181b880, 0x0ffffff0 },
+ { 0x0181b8a0, 0x0ffffff0 },
+ { 0x00181b80, 0x0ffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, davicom_tbl);
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index b031fa21f1a..13995f52d6a 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -17,7 +17,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -111,3 +110,10 @@ static void __exit et1011c_exit(void)
module_init(et1011c_init);
module_exit(et1011c_exit);
+
+static struct mdio_device_id et1011c_tbl[] = {
+ { 0x0282f014, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, et1011c_tbl);
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index e7070515d2e..1fa4d73c3cc 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -20,6 +20,7 @@
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/err.h>
+#include <linux/slab.h>
#define MII_REGS_NUM 29
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index af3f1f2a9f8..439adafeacb 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -13,7 +13,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -132,3 +131,10 @@ static void __exit ip175c_exit(void)
module_init(ip175c_init);
module_exit(ip175c_exit);
+
+static struct mdio_device_id icplus_tbl[] = {
+ { 0x02430d80, 0x0ffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, icplus_tbl);
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 4cf3324ba16..8ee929b796d 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -17,7 +17,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -174,3 +173,11 @@ static void __exit lxt_exit(void)
module_init(lxt_init);
module_exit(lxt_exit);
+
+static struct mdio_device_id lxt_tbl[] = {
+ { 0x78100000, 0xfffffff0 },
+ { 0x001378e0, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, lxt_tbl);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 65ed385c2ce..78b74e83ce5 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -17,7 +17,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -649,3 +648,16 @@ static void __exit marvell_exit(void)
module_init(marvell_init);
module_exit(marvell_exit);
+
+static struct mdio_device_id marvell_tbl[] = {
+ { 0x01410c60, 0xfffffff0 },
+ { 0x01410c90, 0xfffffff0 },
+ { 0x01410cc0, 0xfffffff0 },
+ { 0x01410e10, 0xfffffff0 },
+ { 0x01410cb0, 0xfffffff0 },
+ { 0x01410cd0, 0xfffffff0 },
+ { 0x01410e30, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, marvell_tbl);
diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
index 2576055b350..65391891d8c 100644
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -19,12 +19,16 @@
#include <linux/module.h>
#include <linux/mdio-bitbang.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <linux/delay.h>
-#define MDIO_READ 1
-#define MDIO_WRITE 0
+#define MDIO_READ 2
+#define MDIO_WRITE 1
+
+#define MDIO_C45 (1<<15)
+#define MDIO_C45_ADDR (MDIO_C45 | 0)
+#define MDIO_C45_READ (MDIO_C45 | 3)
+#define MDIO_C45_WRITE (MDIO_C45 | 1)
#define MDIO_SETUP_TIME 10
#define MDIO_HOLD_TIME 10
@@ -90,7 +94,7 @@ static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits)
/* Utility to send the preamble, address, and
* register (common to read and write).
*/
-static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int read, u8 phy, u8 reg)
+static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int op, u8 phy, u8 reg)
{
const struct mdiobb_ops *ops = ctrl->ops;
int i;
@@ -109,23 +113,56 @@ static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int read, u8 phy, u8 reg)
for (i = 0; i < 32; i++)
mdiobb_send_bit(ctrl, 1);
- /* send the start bit (01) and the read opcode (10) or write (10) */
+ /* send the start bit (01) and the read opcode (10) or write (10).
+ Clause 45 operation uses 00 for the start and 11, 10 for
+ read/write */
mdiobb_send_bit(ctrl, 0);
- mdiobb_send_bit(ctrl, 1);
- mdiobb_send_bit(ctrl, read);
- mdiobb_send_bit(ctrl, !read);
+ if (op & MDIO_C45)
+ mdiobb_send_bit(ctrl, 0);
+ else
+ mdiobb_send_bit(ctrl, 1);
+ mdiobb_send_bit(ctrl, (op >> 1) & 1);
+ mdiobb_send_bit(ctrl, (op >> 0) & 1);
mdiobb_send_num(ctrl, phy, 5);
mdiobb_send_num(ctrl, reg, 5);
}
+/* In clause 45 mode all commands are prefixed by MDIO_ADDR to specify the
+ lower 16 bits of the 21 bit address. This transfer is done identically to a
+ MDIO_WRITE except for a different code. To enable clause 45 mode or
+ MII_ADDR_C45 into the address. Theoretically clause 45 and normal devices
+ can exist on the same bus. Normal devices should ignore the MDIO_ADDR
+ phase. */
+static int mdiobb_cmd_addr(struct mdiobb_ctrl *ctrl, int phy, u32 addr)
+{
+ unsigned int dev_addr = (addr >> 16) & 0x1F;
+ unsigned int reg = addr & 0xFFFF;
+ mdiobb_cmd(ctrl, MDIO_C45_ADDR, phy, dev_addr);
+
+ /* send the turnaround (10) */
+ mdiobb_send_bit(ctrl, 1);
+ mdiobb_send_bit(ctrl, 0);
+
+ mdiobb_send_num(ctrl, reg, 16);
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+ mdiobb_get_bit(ctrl);
+
+ return dev_addr;
+}
static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
{
struct mdiobb_ctrl *ctrl = bus->priv;
int ret, i;
- mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
+ } else
+ mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+
ctrl->ops->set_mdio_dir(ctrl, 0);
/* check the turnaround bit: the PHY should be driving it to zero */
@@ -148,7 +185,11 @@ static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
{
struct mdiobb_ctrl *ctrl = bus->priv;
- mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
+ } else
+ mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
/* send the turnaround (10) */
mdiobb_send_bit(ctrl, 1);
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index 61a4461cbda..a872aea4ed7 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -6,6 +6,7 @@
* Copyright (C) 2009 Cavium Networks
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index e17b70291bb..6a6b8199a0d 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -208,7 +208,7 @@ EXPORT_SYMBOL(mdiobus_scan);
* because the bus read/write functions may wait for an interrupt
* to conclude the operation.
*/
-int mdiobus_read(struct mii_bus *bus, int addr, u16 regnum)
+int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
{
int retval;
@@ -233,7 +233,7 @@ EXPORT_SYMBOL(mdiobus_read);
* because the bus read/write functions may wait for an interrupt
* to conclude the operation.
*/
-int mdiobus_write(struct mii_bus *bus, int addr, u16 regnum, u16 val)
+int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
{
int err;
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 00000000000..68dd107bad2
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,113 @@
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010 Micrel, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Support : ksz9021 , vsc8201, ks8001
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define PHY_ID_KSZ9021 0x00221611
+#define PHY_ID_VSC8201 0x000FC413
+#define PHY_ID_KS8001 0x0022161A
+
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+ return 0;
+}
+
+
+static struct phy_driver ks8001_driver = {
+ .phy_id = PHY_ID_KS8001,
+ .phy_id_mask = 0x00fffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_POLL,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver vsc8201_driver = {
+ .phy_id = PHY_ID_VSC8201,
+ .name = "Micrel VSC8201",
+ .phy_id_mask = 0x00fffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_POLL,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ksz9021_driver = {
+ .phy_id = PHY_ID_KSZ9021,
+ .phy_id_mask = 0x000fff10,
+ .name = "Micrel KSZ9021 Gigabit PHY",
+ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause,
+ .flags = PHY_POLL,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE, },
+};
+
+static int __init ksphy_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&ks8001_driver);
+ if (ret)
+ goto err1;
+ ret = phy_driver_register(&vsc8201_driver);
+ if (ret)
+ goto err2;
+
+ ret = phy_driver_register(&ksz9021_driver);
+ if (ret)
+ goto err3;
+ return 0;
+
+err3:
+ phy_driver_unregister(&vsc8201_driver);
+err2:
+ phy_driver_unregister(&ks8001_driver);
+err1:
+ return ret;
+}
+
+static void __exit ksphy_exit(void)
+{
+ phy_driver_unregister(&ks8001_driver);
+ phy_driver_unregister(&vsc8201_driver);
+ phy_driver_unregister(&ksz9021_driver);
+}
+
+module_init(ksphy_init);
+module_exit(ksphy_exit);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id micrel_tbl[] = {
+ { PHY_ID_KSZ9021, 0x000fff10 },
+ { PHY_ID_VSC8201, 0x00fffff0 },
+ { PHY_ID_KS8001, 0x00fffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, micrel_tbl);
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index 6c636eb7208..729ab29ba28 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c
@@ -153,3 +153,10 @@ MODULE_LICENSE("GPL");
module_init(ns_init);
module_exit(ns_exit);
+
+static struct mdio_device_id ns_tbl[] = {
+ { DP83865_PHY_ID, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, ns_tbl);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 0295097d6c4..64be4664cca 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -19,7 +19,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index db1794546c5..1a99bb24410 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -149,6 +149,7 @@ EXPORT_SYMBOL(phy_scan_fixups);
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
{
struct phy_device *dev;
+
/* We allocate the device, and initialize the
* default values */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
@@ -179,6 +180,17 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
mutex_init(&dev->lock);
INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
+ /* Request the appropriate module unconditionally; don't
+ bother trying to do so only if it isn't already loaded,
+ because that gets complicated. A hotplug event would have
+ done an unconditional modprobe anyway.
+ We don't do normal hotplug because it won't work for MDIO
+ -- because it relies on the device staying around for long
+ enough for the driver to get loaded. With MDIO, the NIC
+ driver will get bored and give up as soon as it finds that
+ there's no driver _already_ loaded. */
+ request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
+
return dev;
}
EXPORT_SYMBOL(phy_device_create);
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index 23062d06723..6736b23f1b2 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -17,7 +17,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -138,3 +137,10 @@ static void __exit qs6612_exit(void)
module_init(qs6612_init);
module_exit(qs6612_exit);
+
+static struct mdio_device_id qs6612_tbl[] = {
+ { 0x00181440, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, qs6612_tbl);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index a052a6744a5..f567c0e1aaa 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -78,3 +78,10 @@ static void __exit realtek_exit(void)
module_init(realtek_init);
module_exit(realtek_exit);
+
+static struct mdio_device_id realtek_tbl[] = {
+ { 0x001cc912, 0x001fffff },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, realtek_tbl);
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index ed2644a5750..78fa988256f 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -253,3 +253,14 @@ MODULE_LICENSE("GPL");
module_init(smsc_init);
module_exit(smsc_exit);
+
+static struct mdio_device_id smsc_tbl[] = {
+ { 0x0007c0a0, 0xfffffff0 },
+ { 0x0007c0b0, 0xfffffff0 },
+ { 0x0007c0c0, 0xfffffff0 },
+ { 0x0007c0d0, 0xfffffff0 },
+ { 0x0007c0f0, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, smsc_tbl);
diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index 6bdb0d53aaf..72290099e5e 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -132,6 +132,14 @@ static void __exit ste10Xp_exit(void)
module_init(ste10Xp_init);
module_exit(ste10Xp_exit);
+static struct mdio_device_id ste10Xp_tbl[] = {
+ { STE101P_PHY_ID, 0xfffffff0 },
+ { STE100P_PHY_ID, 0xffffffff },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, ste10Xp_tbl);
+
MODULE_DESCRIPTION("STMicroelectronics STe10Xp PHY driver");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index dd3b2447e85..45cce50a279 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -191,3 +191,11 @@ static void __exit vsc82xx_exit(void)
module_init(vsc82xx_init);
module_exit(vsc82xx_exit);
+
+static struct mdio_device_id vitesse_tbl[] = {
+ { PHY_ID_VSC8244, 0x000fffc0 },
+ { PHY_ID_VSC8221, 0x000ffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, vitesse_tbl);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 15:07:52 +0000