diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/lxt.c | 51 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-gpio.c | 13 |
2 files changed, 58 insertions, 6 deletions
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index 8ee929b796d..dbd00345373 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -53,6 +53,9 @@ #define MII_LXT971_ISR 19 /* Interrupt Status Register */ +/* register definitions for the 973 */ +#define MII_LXT973_PCR 16 /* Port Configuration Register */ +#define PCR_FIBER_SELECT 1 MODULE_DESCRIPTION("Intel LXT PHY driver"); MODULE_AUTHOR("Andy Fleming"); @@ -119,6 +122,33 @@ static int lxt971_config_intr(struct phy_device *phydev) return err; } +static int lxt973_probe(struct phy_device *phydev) +{ + int val = phy_read(phydev, MII_LXT973_PCR); + + if (val & PCR_FIBER_SELECT) { + /* + * If fiber is selected, then the only correct setting + * is 100Mbps, full duplex, and auto negotiation off. + */ + val = phy_read(phydev, MII_BMCR); + val |= (BMCR_SPEED100 | BMCR_FULLDPLX); + val &= ~BMCR_ANENABLE; + phy_write(phydev, MII_BMCR, val); + /* Remember that the port is in fiber mode. */ + phydev->priv = lxt973_probe; + } else { + phydev->priv = NULL; + } + return 0; +} + +static int lxt973_config_aneg(struct phy_device *phydev) +{ + /* Do nothing if port is in fiber mode. */ + return phydev->priv ? 0 : genphy_config_aneg(phydev); +} + static struct phy_driver lxt970_driver = { .phy_id = 0x78100000, .name = "LXT970", @@ -146,6 +176,18 @@ static struct phy_driver lxt971_driver = { .driver = { .owner = THIS_MODULE,}, }; +static struct phy_driver lxt973_driver = { + .phy_id = 0x00137a10, + .name = "LXT973", + .phy_id_mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .flags = 0, + .probe = lxt973_probe, + .config_aneg = lxt973_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + static int __init lxt_init(void) { int ret; @@ -157,9 +199,15 @@ static int __init lxt_init(void) ret = phy_driver_register(&lxt971_driver); if (ret) goto err2; + + ret = phy_driver_register(&lxt973_driver); + if (ret) + goto err3; return 0; - err2: + err3: + phy_driver_unregister(&lxt971_driver); + err2: phy_driver_unregister(&lxt970_driver); err1: return ret; @@ -169,6 +217,7 @@ static void __exit lxt_exit(void) { phy_driver_unregister(&lxt970_driver); phy_driver_unregister(&lxt971_driver); + phy_driver_unregister(&lxt973_driver); } module_init(lxt_init); diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 35897134a5d..fc5fef2a817 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -199,12 +199,12 @@ static int __devinit mdio_ofgpio_probe(struct of_device *ofdev, if (!pdata) return -ENOMEM; - ret = of_get_gpio(ofdev->node, 0); + ret = of_get_gpio(ofdev->dev.of_node, 0); if (ret < 0) goto out_free; pdata->mdc = ret; - ret = of_get_gpio(ofdev->node, 1); + ret = of_get_gpio(ofdev->dev.of_node, 1); if (ret < 0) goto out_free; pdata->mdio = ret; @@ -213,7 +213,7 @@ static int __devinit mdio_ofgpio_probe(struct of_device *ofdev, if (!new_bus) goto out_free; - ret = of_mdiobus_register(new_bus, ofdev->node); + ret = of_mdiobus_register(new_bus, ofdev->dev.of_node); if (ret) mdio_gpio_bus_deinit(&ofdev->dev); @@ -241,8 +241,11 @@ static struct of_device_id mdio_ofgpio_match[] = { MODULE_DEVICE_TABLE(of, mdio_ofgpio_match); static struct of_platform_driver mdio_ofgpio_driver = { - .name = "mdio-gpio", - .match_table = mdio_ofgpio_match, + .driver = { + .name = "mdio-gpio", + .owner = THIS_MODULE, + .of_match_table = mdio_ofgpio_match, + }, .probe = mdio_ofgpio_probe, .remove = __devexit_p(mdio_ofgpio_remove), }; |