diff options
Diffstat (limited to 'drivers/net/qlge/qlge_mpi.c')
| -rw-r--r-- | drivers/net/qlge/qlge_mpi.c | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c new file mode 100644 index 00000000000..24fe344bcf1 --- /dev/null +++ b/drivers/net/qlge/qlge_mpi.c @@ -0,0 +1,150 @@ +#include "qlge.h" + +static int ql_read_mbox_reg(struct ql_adapter *qdev, u32 reg, u32 *data) +{ + int status; + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR); + if (status) + goto exit; + /* set up for reg read */ + ql_write32(qdev, PROC_ADDR, reg | PROC_ADDR_R); + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR); + if (status) + goto exit; + /* get the data */ + *data = ql_read32(qdev, PROC_DATA); +exit: + return status; +} + +int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + int i, status; + + status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK); + if (status) + return -EBUSY; + for (i = 0; i < mbcp->out_count; i++) { + status = + ql_read_mbox_reg(qdev, qdev->mailbox_out + i, + &mbcp->mbox_out[i]); + if (status) { + QPRINTK(qdev, DRV, ERR, "Failed mailbox read.\n"); + break; + } + } + ql_sem_unlock(qdev, SEM_PROC_REG_MASK); /* does flush too */ + return status; +} + +static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + mbcp->out_count = 2; + + if (ql_get_mb_sts(qdev, mbcp)) + goto exit; + + qdev->link_status = mbcp->mbox_out[1]; + QPRINTK(qdev, DRV, ERR, "Link Up.\n"); + QPRINTK(qdev, DRV, INFO, "Link Status = 0x%.08x.\n", mbcp->mbox_out[1]); + if (!netif_carrier_ok(qdev->ndev)) { + QPRINTK(qdev, LINK, INFO, "Link is Up.\n"); + netif_carrier_on(qdev->ndev); + netif_wake_queue(qdev->ndev); + } +exit: + /* Clear the MPI firmware status. */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); +} + +static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + mbcp->out_count = 3; + + if (ql_get_mb_sts(qdev, mbcp)) { + QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n"); + goto exit; + } + + if (netif_carrier_ok(qdev->ndev)) { + QPRINTK(qdev, LINK, INFO, "Link is Down.\n"); + netif_carrier_off(qdev->ndev); + netif_stop_queue(qdev->ndev); + } + QPRINTK(qdev, DRV, ERR, "Link Down.\n"); + QPRINTK(qdev, DRV, ERR, "Link Status = 0x%.08x.\n", mbcp->mbox_out[1]); +exit: + /* Clear the MPI firmware status. */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); +} + +static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + mbcp->out_count = 2; + + if (ql_get_mb_sts(qdev, mbcp)) { + QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n"); + goto exit; + } + QPRINTK(qdev, DRV, ERR, "Firmware initialized!\n"); + QPRINTK(qdev, DRV, ERR, "Firmware status = 0x%.08x.\n", + mbcp->mbox_out[0]); + QPRINTK(qdev, DRV, ERR, "Firmware Revision = 0x%.08x.\n", + mbcp->mbox_out[1]); +exit: + /* Clear the MPI firmware status. */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); +} + +void ql_mpi_work(struct work_struct *work) +{ + struct ql_adapter *qdev = + container_of(work, struct ql_adapter, mpi_work.work); + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + mbcp->out_count = 1; + + while (ql_read32(qdev, STS) & STS_PI) { + if (ql_get_mb_sts(qdev, mbcp)) { + QPRINTK(qdev, DRV, ERR, + "Could not read MPI, resetting ASIC!\n"); + ql_queue_asic_error(qdev); + } + + switch (mbcp->mbox_out[0]) { + case AEN_LINK_UP: + ql_link_up(qdev, mbcp); + break; + case AEN_LINK_DOWN: + ql_link_down(qdev, mbcp); + break; + case AEN_FW_INIT_DONE: + ql_init_fw_done(qdev, mbcp); + break; + case MB_CMD_STS_GOOD: + break; + case AEN_FW_INIT_FAIL: + case AEN_SYS_ERR: + case MB_CMD_STS_ERR: + ql_queue_fw_error(qdev); + default: + /* Clear the MPI firmware status. */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); + break; + } + } + ql_enable_completion_interrupt(qdev, 0); +} + +void ql_mpi_reset_work(struct work_struct *work) +{ + struct ql_adapter *qdev = + container_of(work, struct ql_adapter, mpi_reset_work.work); + QPRINTK(qdev, DRV, ERR, + "Enter, qdev = %p..\n", qdev); + ql_write32(qdev, CSR, CSR_CMD_SET_RST); + msleep(50); + ql_write32(qdev, CSR, CSR_CMD_CLR_RST); +} |