summaryrefslogtreecommitdiffstats
path: root/drivers/net/r8169.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/r8169.c')
-rw-r--r--drivers/net/r8169.c15
1 files changed, 7 insertions, 8 deletions
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index f0471d102e3..14a76f7cf90 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -92,19 +92,18 @@ VERSION 2.2LK <2005/01/25>
#endif /* RTL8169_DEBUG */
#define R8169_MSG_DEFAULT \
- (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | NETIF_MSG_IFUP | \
- NETIF_MSG_IFDOWN)
+ (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN)
#define TX_BUFFS_AVAIL(tp) \
(tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
#ifdef CONFIG_R8169_NAPI
#define rtl8169_rx_skb netif_receive_skb
-#define rtl8169_rx_hwaccel_skb vlan_hwaccel_rx
+#define rtl8169_rx_hwaccel_skb vlan_hwaccel_receive_skb
#define rtl8169_rx_quota(count, quota) min(count, quota)
#else
#define rtl8169_rx_skb netif_rx
-#define rtl8169_rx_hwaccel_skb vlan_hwaccel_receive_skb
+#define rtl8169_rx_hwaccel_skb vlan_hwaccel_rx
#define rtl8169_rx_quota(count, quota) count
#endif
@@ -1028,6 +1027,7 @@ static struct ethtool_ops rtl8169_ethtool_ops = {
.get_strings = rtl8169_get_strings,
.get_stats_count = rtl8169_get_stats_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum,
@@ -1346,10 +1346,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
} else {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX
- "Cannot find PowerManagement capability. "
- "Aborting.\n");
+ "PowerManagement capability not found.\n");
}
- goto err_out_mwi;
}
/* make sure PCI base addr 1 is MMIO */
@@ -1512,6 +1510,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Get MAC address. FIXME: read EEPROM */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
dev->open = rtl8169_open;
dev->hard_start_xmit = rtl8169_start_xmit;
@@ -2515,7 +2514,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
} while (boguscnt > 0);
if (boguscnt <= 0) {
- if (net_ratelimit() && netif_msg_intr(tp)) {
+ if (netif_msg_intr(tp) && net_ratelimit() ) {
printk(KERN_WARNING
"%s: Too much work at interrupt!\n", dev->name);
}