diff options
Diffstat (limited to 'drivers/net/s2io.c')
-rw-r--r-- | drivers/net/s2io.c | 391 |
1 files changed, 237 insertions, 154 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 063040bc62d..350723bd5eb 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1415,7 +1415,7 @@ static int init_nic(struct s2io_nic *nic) val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | TTI_DATA2_MEM_TX_UFC_B(0x20) | - TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80); + TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80); writeq(val64, &bar0->tti_data2_mem); val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD; @@ -1611,7 +1611,8 @@ static int init_nic(struct s2io_nic *nic) * that does not start on an ADB to reduce disconnects. */ if (nic->device_type == XFRAME_II_DEVICE) { - val64 = EXT_REQ_EN | MISC_LINK_STABILITY_PRD(3); + val64 = FAULT_BEHAVIOUR | EXT_REQ_EN | + MISC_LINK_STABILITY_PRD(3); writeq(val64, &bar0->misc_control); val64 = readq(&bar0->pic_control2); val64 &= ~(BIT(13)|BIT(14)|BIT(15)); @@ -1878,41 +1879,36 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) } } -static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc) +/** + * verify_pcc_quiescent- Checks for PCC quiescent state + * Return: 1 If PCC is quiescence + * 0 If PCC is not quiescence + */ +static int verify_pcc_quiescent(nic_t *sp, int flag) { - int ret = 0; + int ret = 0, herc; + XENA_dev_config_t __iomem *bar0 = sp->bar0; + u64 val64 = readq(&bar0->adapter_status); + + herc = (sp->device_type == XFRAME_II_DEVICE); if (flag == FALSE) { - if ((!herc && (rev_id >= 4)) || herc) { - if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE)) ret = 1; - } - }else { - if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + } else { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE)) ret = 1; - } } } else { - if ((!herc && (rev_id >= 4)) || herc) { + if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) { if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == - ADAPTER_STATUS_RMAC_PCC_IDLE) && - (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ADAPTER_STATUS_RMAC_PCC_IDLE)) ret = 1; - } } else { if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) == - ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && - (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE)) ret = 1; - } } } @@ -1920,9 +1916,6 @@ static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc) } /** * verify_xena_quiescence - Checks whether the H/W is ready - * @val64 : Value read from adapter status register. - * @flag : indicates if the adapter enable bit was ever written once - * before. * Description: Returns whether the H/W is ready to go or not. Depending * on whether adapter enable bit was written or not the comparison * differs and the calling function passes the input argument flag to @@ -1931,24 +1924,63 @@ static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc) * 0 If Xena is not quiescence */ -static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) +static int verify_xena_quiescence(nic_t *sp) { - int ret = 0, herc; - u64 tmp64 = ~((u64) val64); - int rev_id = get_xena_rev_id(sp->pdev); + int mode; + XENA_dev_config_t __iomem *bar0 = sp->bar0; + u64 val64 = readq(&bar0->adapter_status); + mode = s2io_verify_pci_mode(sp); - herc = (sp->device_type == XFRAME_II_DEVICE); - if (! - (tmp64 & - (ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY | - ADAPTER_STATUS_PFC_READY | ADAPTER_STATUS_TMAC_BUF_EMPTY | - ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY | - ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK | - ADAPTER_STATUS_P_PLL_LOCK))) { - ret = check_prc_pcc_state(val64, flag, rev_id, herc); + if (!(val64 & ADAPTER_STATUS_TDMA_READY)) { + DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!"); + return 0; + } + if (!(val64 & ADAPTER_STATUS_RDMA_READY)) { + DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!"); + return 0; + } + if (!(val64 & ADAPTER_STATUS_PFC_READY)) { + DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!"); + return 0; + } + if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) { + DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!"); + return 0; + } + if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) { + DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!"); + return 0; + } + if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) { + DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!"); + return 0; + } + if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) { + DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!"); + return 0; + } + if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) { + DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!"); + return 0; } - return ret; + /* + * In PCI 33 mode, the P_PLL is not used, and therefore, + * the the P_PLL_LOCK bit in the adapter_status register will + * not be asserted. + */ + if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) && + sp->device_type == XFRAME_II_DEVICE && mode != + PCI_MODE_PCI_33) { + DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!"); + return 0; + } + if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!"); + return 0; + } + return 1; } /** @@ -2053,7 +2085,7 @@ static int start_nic(struct s2io_nic *nic) * it. */ val64 = readq(&bar0->adapter_status); - if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) { + if (!verify_xena_quiescence(nic)) { DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name); DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n", (unsigned long long) val64); @@ -2577,7 +2609,6 @@ static int s2io_poll(struct net_device *dev, int *budget) mac_info_t *mac_control; struct config_param *config; XENA_dev_config_t __iomem *bar0 = nic->bar0; - u64 val64 = 0xFFFFFFFFFFFFFFFFULL; int i; atomic_inc(&nic->isr_cnt); @@ -2589,8 +2620,8 @@ static int s2io_poll(struct net_device *dev, int *budget) nic->pkts_to_process = dev->quota; org_pkts_to_process = nic->pkts_to_process; - writeq(val64, &bar0->rx_traffic_int); - val64 = readl(&bar0->rx_traffic_int); + writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); + readl(&bar0->rx_traffic_int); for (i = 0; i < config->rx_ring_num; i++) { rx_intr_handler(&mac_control->rings[i]); @@ -2616,7 +2647,7 @@ static int s2io_poll(struct net_device *dev, int *budget) } /* Re enable the Rx interrupts. */ writeq(0x0, &bar0->rx_traffic_mask); - val64 = readl(&bar0->rx_traffic_mask); + readl(&bar0->rx_traffic_mask); atomic_dec(&nic->isr_cnt); return 0; @@ -2851,11 +2882,10 @@ static void tx_intr_handler(fifo_info_t *fifo_data) } if ((err >> 48) == 0xA) { DBG_PRINT(TX_DBG, "TxD returned due \ -to loss of link\n"); + to loss of link\n"); } else { - DBG_PRINT(ERR_DBG, "***TxD error \ -%llx\n", err); + DBG_PRINT(ERR_DBG, "***TxD error %llx\n", err); } } @@ -3294,6 +3324,25 @@ static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit) } return ret; } +/* + * check_pci_device_id - Checks if the device id is supported + * @id : device id + * Description: Function to check if the pci device id is supported by driver. + * Return value: Actual device id if supported else PCI_ANY_ID + */ +static u16 check_pci_device_id(u16 id) +{ + switch (id) { + case PCI_DEVICE_ID_HERC_WIN: + case PCI_DEVICE_ID_HERC_UNI: + return XFRAME_II_DEVICE; + case PCI_DEVICE_ID_S2IO_UNI: + case PCI_DEVICE_ID_S2IO_WIN: + return XFRAME_I_DEVICE; + default: + return PCI_ANY_ID; + } +} /** * s2io_reset - Resets the card. @@ -3310,37 +3359,52 @@ static void s2io_reset(nic_t * sp) XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; u16 subid, pci_cmd; + int i; + u16 val16; + DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n", + __FUNCTION__, sp->dev->name); /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */ pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); + if (sp->device_type == XFRAME_II_DEVICE) { + int ret; + ret = pci_set_power_state(sp->pdev, 3); + if (!ret) + ret = pci_set_power_state(sp->pdev, 0); + else { + DBG_PRINT(ERR_DBG,"%s PME based SW_Reset failed!\n", + __FUNCTION__); + goto old_way; + } + msleep(20); + goto new_way; + } +old_way: val64 = SW_RESET_ALL; writeq(val64, &bar0->sw_reset); - - /* - * At this stage, if the PCI write is indeed completed, the - * card is reset and so is the PCI Config space of the device. - * So a read cannot be issued at this stage on any of the - * registers to ensure the write into "sw_reset" register - * has gone through. - * Question: Is there any system call that will explicitly force - * all the write commands still pending on the bus to be pushed - * through? - * As of now I'am just giving a 250ms delay and hoping that the - * PCI write to sw_reset register is done by this time. - */ - msleep(250); +new_way: if (strstr(sp->product_name, "CX4")) { msleep(750); } + msleep(250); + for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) { - /* Restore the PCI state saved during initialization. */ - pci_restore_state(sp->pdev); - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - pci_cmd); - s2io_init_pci(sp); + /* Restore the PCI state saved during initialization. */ + pci_restore_state(sp->pdev); + pci_read_config_word(sp->pdev, 0x2, &val16); + if (check_pci_device_id(val16) != (u16)PCI_ANY_ID) + break; + msleep(200); + } - msleep(250); + if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) { + DBG_PRINT(ERR_DBG,"%s SW_Reset failed!\n", __FUNCTION__); + } + + pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd); + + s2io_init_pci(sp); /* Set swapper to enable I/O register access */ s2io_set_swapper(sp); @@ -4104,39 +4168,33 @@ static void s2io_txpic_intr_handle(nic_t *sp) } else if (val64 & GPIO_INT_REG_LINK_UP) { val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(sp, val64, - sp->device_enabled_once)) { /* Enable Adapter */ - val64 = readq(&bar0->adapter_control); - val64 |= ADAPTER_CNTL_EN; - writeq(val64, &bar0->adapter_control); - val64 |= ADAPTER_LED_ON; - writeq(val64, &bar0->adapter_control); - if (!sp->device_enabled_once) - sp->device_enabled_once = 1; + val64 = readq(&bar0->adapter_control); + val64 |= ADAPTER_CNTL_EN; + writeq(val64, &bar0->adapter_control); + val64 |= ADAPTER_LED_ON; + writeq(val64, &bar0->adapter_control); + if (!sp->device_enabled_once) + sp->device_enabled_once = 1; - s2io_link(sp, LINK_UP); - /* - * unmask link down interrupt and mask link-up - * intr - */ - val64 = readq(&bar0->gpio_int_mask); - val64 &= ~GPIO_INT_MASK_LINK_DOWN; - val64 |= GPIO_INT_MASK_LINK_UP; - writeq(val64, &bar0->gpio_int_mask); + s2io_link(sp, LINK_UP); + /* + * unmask link down interrupt and mask link-up + * intr + */ + val64 = readq(&bar0->gpio_int_mask); + val64 &= ~GPIO_INT_MASK_LINK_DOWN; + val64 |= GPIO_INT_MASK_LINK_UP; + writeq(val64, &bar0->gpio_int_mask); - } }else if (val64 & GPIO_INT_REG_LINK_DOWN) { val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(sp, val64, - sp->device_enabled_once)) { - s2io_link(sp, LINK_DOWN); - /* Link is down so unmaks link up interrupt */ - val64 = readq(&bar0->gpio_int_mask); - val64 &= ~GPIO_INT_MASK_LINK_UP; - val64 |= GPIO_INT_MASK_LINK_DOWN; - writeq(val64, &bar0->gpio_int_mask); - } + s2io_link(sp, LINK_DOWN); + /* Link is down so unmaks link up interrupt */ + val64 = readq(&bar0->gpio_int_mask); + val64 &= ~GPIO_INT_MASK_LINK_UP; + val64 |= GPIO_INT_MASK_LINK_DOWN; + writeq(val64, &bar0->gpio_int_mask); } } val64 = readq(&bar0->gpio_int_mask); @@ -4161,7 +4219,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) nic_t *sp = dev->priv; XENA_dev_config_t __iomem *bar0 = sp->bar0; int i; - u64 reason = 0, val64, org_mask; + u64 reason = 0; mac_info_t *mac_control; struct config_param *config; @@ -4180,22 +4238,24 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) reason = readq(&bar0->general_int_status); if (!reason) { - /* The interrupt was not raised by Xena. */ + /* The interrupt was not raised by us. */ + atomic_dec(&sp->isr_cnt); + return IRQ_NONE; + } + else if (unlikely(reason == S2IO_MINUS_ONE) ) { + /* Disable device and get out */ atomic_dec(&sp->isr_cnt); return IRQ_NONE; } - - val64 = 0xFFFFFFFFFFFFFFFFULL; - /* Store current mask before masking all interrupts */ - org_mask = readq(&bar0->general_int_mask); - writeq(val64, &bar0->general_int_mask); if (napi) { if (reason & GEN_INTR_RXTRAFFIC) { - if (netif_rx_schedule_prep(dev)) { - writeq(val64, &bar0->rx_traffic_mask); + if ( likely ( netif_rx_schedule_prep(dev)) ) { __netif_rx_schedule(dev); + writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask); } + else + writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); } } else { /* @@ -4205,7 +4265,9 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) * will ensure that the actual interrupt causing bit get's * cleared and hence a read can be avoided. */ - writeq(val64, &bar0->rx_traffic_int); + if (reason & GEN_INTR_RXTRAFFIC) + writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); + for (i = 0; i < config->rx_ring_num; i++) { rx_intr_handler(&mac_control->rings[i]); } @@ -4216,7 +4278,8 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) * will ensure that the actual interrupt causing bit get's * cleared and hence a read can be avoided. */ - writeq(val64, &bar0->tx_traffic_int); + if (reason & GEN_INTR_TXTRAFFIC) + writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int); for (i = 0; i < config->tx_fifo_num; i++) tx_intr_handler(&mac_control->fifos[i]); @@ -4912,6 +4975,7 @@ static void s2io_vpd_read(nic_t *nic) strcpy(nic->product_name, "Xframe I 10GbE network adapter"); vpd_addr = 0x50; } + strcpy(nic->serial_num, "NOT AVAILABLE"); vpd_data = kmalloc(256, GFP_KERNEL); if (!vpd_data) @@ -4935,7 +4999,22 @@ static void s2io_vpd_read(nic_t *nic) pci_read_config_dword(nic->pdev, (vpd_addr + 4), (u32 *)&vpd_data[i]); } - if ((!fail) && (vpd_data[1] < VPD_PRODUCT_NAME_LEN)) { + + if(!fail) { + /* read serial number of adapter */ + for (cnt = 0; cnt < 256; cnt++) { + if ((vpd_data[cnt] == 'S') && + (vpd_data[cnt+1] == 'N') && + (vpd_data[cnt+2] < VPD_STRING_LEN)) { + memset(nic->serial_num, 0, VPD_STRING_LEN); + memcpy(nic->serial_num, &vpd_data[cnt + 3], + vpd_data[cnt+2]); + break; + } + } + } + + if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) { memset(nic->product_name, 0, vpd_data[1]); memcpy(nic->product_name, &vpd_data[3], vpd_data[1]); } @@ -5890,50 +5969,45 @@ static void s2io_set_link(struct work_struct *work) } val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) { - if (LINK_IS_UP(val64)) { - val64 = readq(&bar0->adapter_control); - val64 |= ADAPTER_CNTL_EN; - writeq(val64, &bar0->adapter_control); - if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, - subid)) { - val64 = readq(&bar0->gpio_control); - val64 |= GPIO_CTRL_GPIO_0; - writeq(val64, &bar0->gpio_control); - val64 = readq(&bar0->gpio_control); - } else { - val64 |= ADAPTER_LED_ON; + if (LINK_IS_UP(val64)) { + if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) { + if (verify_xena_quiescence(nic)) { + val64 = readq(&bar0->adapter_control); + val64 |= ADAPTER_CNTL_EN; writeq(val64, &bar0->adapter_control); - } - if (s2io_link_fault_indication(nic) == - MAC_RMAC_ERR_TIMER) { - val64 = readq(&bar0->adapter_status); - if (!LINK_IS_UP(val64)) { - DBG_PRINT(ERR_DBG, "%s:", dev->name); - DBG_PRINT(ERR_DBG, " Link down"); - DBG_PRINT(ERR_DBG, "after "); - DBG_PRINT(ERR_DBG, "enabling "); - DBG_PRINT(ERR_DBG, "device \n"); + if (CARDS_WITH_FAULTY_LINK_INDICATORS( + nic->device_type, subid)) { + val64 = readq(&bar0->gpio_control); + val64 |= GPIO_CTRL_GPIO_0; + writeq(val64, &bar0->gpio_control); + val64 = readq(&bar0->gpio_control); + } else { + val64 |= ADAPTER_LED_ON; + writeq(val64, &bar0->adapter_control); } - } - if (nic->device_enabled_once == FALSE) { nic->device_enabled_once = TRUE; + } else { + DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name); + DBG_PRINT(ERR_DBG, "device is not Quiescent\n"); + netif_stop_queue(dev); } + } + val64 = readq(&bar0->adapter_status); + if (!LINK_IS_UP(val64)) { + DBG_PRINT(ERR_DBG, "%s:", dev->name); + DBG_PRINT(ERR_DBG, " Link down after enabling "); + DBG_PRINT(ERR_DBG, "device \n"); + } else s2io_link(nic, LINK_UP); - } else { - if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, - subid)) { - val64 = readq(&bar0->gpio_control); - val64 &= ~GPIO_CTRL_GPIO_0; - writeq(val64, &bar0->gpio_control); - val64 = readq(&bar0->gpio_control); - } - s2io_link(nic, LINK_DOWN); + } else { + if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, + subid)) { + val64 = readq(&bar0->gpio_control); + val64 &= ~GPIO_CTRL_GPIO_0; + writeq(val64, &bar0->gpio_control); + val64 = readq(&bar0->gpio_control); } - } else { /* NIC is not Quiescent. */ - DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name); - DBG_PRINT(ERR_DBG, "device is not Quiescent\n"); - netif_stop_queue(dev); + s2io_link(nic, LINK_DOWN); } clear_bit(0, &(nic->link_state)); } @@ -5982,7 +6056,7 @@ static int set_rxd_buffer_pointer(nic_t *sp, RxD_t *rxdp, buffAdd_t *ba, *skb = dev_alloc_skb(size); if (!(*skb)) { DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n", - dev->name); + dev->name); return -ENOMEM; } ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 = @@ -6252,7 +6326,8 @@ static void s2io_card_down(nic_t * sp) rxd_owner_bit_reset(sp); val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) { + if (verify_xena_quiescence(sp)) { + if(verify_pcc_quiescent(sp, sp->device_enabled_once)) break; } @@ -6315,6 +6390,13 @@ static int s2io_card_up(nic_t * sp) DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i, atomic_read(&sp->rx_bufs_left[i])); } + /* Maintain the state prior to the open */ + if (sp->promisc_flg) + sp->promisc_flg = 0; + if (sp->m_cast_flg) { + sp->m_cast_flg = 0; + sp->all_multi_pos= 0; + } /* Setting its receive mode */ s2io_set_multicast(dev); @@ -6914,7 +6996,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->bar0 = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); if (!sp->bar0) { - DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem1\n", + DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n", dev->name); ret = -ENOMEM; goto bar0_remap_failed; @@ -6923,7 +7005,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->bar1 = ioremap(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2)); if (!sp->bar1) { - DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem2\n", + DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n", dev->name); ret = -ENOMEM; goto bar1_remap_failed; @@ -7081,13 +7163,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name, s2io_driver_version); DBG_PRINT(ERR_DBG, "%s: MAC ADDR: " - "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, + "%02x:%02x:%02x:%02x:%02x:%02x", dev->name, sp->def_mac_addr[0].mac_addr[0], sp->def_mac_addr[0].mac_addr[1], sp->def_mac_addr[0].mac_addr[2], sp->def_mac_addr[0].mac_addr[3], sp->def_mac_addr[0].mac_addr[4], sp->def_mac_addr[0].mac_addr[5]); + DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num); if (sp->device_type & XFRAME_II_DEVICE) { mode = s2io_print_pci_mode(sp); if (mode < 0) { @@ -7200,7 +7283,6 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev) free_shared_mem(sp); iounmap(sp->bar0); iounmap(sp->bar1); - pci_disable_device(pdev); if (sp->intr_type != MSI_X) pci_release_regions(pdev); else { @@ -7211,6 +7293,7 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev) } pci_set_drvdata(pdev, NULL); free_netdev(dev); + pci_disable_device(pdev); } /** |