diff options
Diffstat (limited to 'drivers/net/s2io.c')
| -rw-r--r-- | drivers/net/s2io.c | 55 |
1 files changed, 40 insertions, 15 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 63266670624..fa57c49c0c5 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -84,7 +84,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "2.0.26.6" +#define DRV_VERSION "2.0.26.10" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; @@ -1081,7 +1081,7 @@ static int init_nic(struct s2io_nic *nic) /* to set the swapper controle on the card */ if(s2io_set_swapper(nic)) { DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n"); - return -1; + return -EIO; } /* @@ -1100,6 +1100,20 @@ static int init_nic(struct s2io_nic *nic) msleep(500); val64 = readq(&bar0->sw_reset); + /* Ensure that it's safe to access registers by checking + * RIC_RUNNING bit is reset. Check is valid only for XframeII. + */ + if (nic->device_type == XFRAME_II_DEVICE) { + for (i = 0; i < 50; i++) { + val64 = readq(&bar0->adapter_status); + if (!(val64 & ADAPTER_STATUS_RIC_RUNNING)) + break; + msleep(10); + } + if (i == 50) + return -ENODEV; + } + /* Enable Receiving broadcasts */ add = &bar0->mac_cfg; val64 = readq(&bar0->mac_cfg); @@ -1503,7 +1517,7 @@ static int init_nic(struct s2io_nic *nic) DBG_PRINT(ERR_DBG, "%s: failed rts ds steering", dev->name); DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i); - return FAILURE; + return -ENODEV; } } @@ -1570,7 +1584,7 @@ static int init_nic(struct s2io_nic *nic) if (time > 10) { DBG_PRINT(ERR_DBG, "%s: TTI init Failed\n", dev->name); - return -1; + return -ENODEV; } msleep(50); time++; @@ -1623,7 +1637,7 @@ static int init_nic(struct s2io_nic *nic) if (time > 10) { DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n", dev->name); - return -1; + return -ENODEV; } time++; msleep(50); @@ -2690,9 +2704,6 @@ static int s2io_poll(struct napi_struct *napi, int budget) struct XENA_dev_config __iomem *bar0 = nic->bar0; int i; - if (!is_s2io_card_up(nic)) - return 0; - mac_control = &nic->mac_control; config = &nic->config; @@ -3723,7 +3734,7 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) } /* Handle software interrupt used during MSI(X) test */ -static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id) +static irqreturn_t s2io_test_intr(int irq, void *dev_id) { struct s2io_nic *sp = dev_id; @@ -3734,7 +3745,7 @@ static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id) } /* Test interrupt path by forcing a a software IRQ */ -static int __devinit s2io_test_msi(struct s2io_nic *sp) +static int s2io_test_msi(struct s2io_nic *sp) { struct pci_dev *pdev = sp->pdev; struct XENA_dev_config __iomem *bar0 = sp->bar0; @@ -3914,6 +3925,12 @@ static int s2io_close(struct net_device *dev) { struct s2io_nic *sp = dev->priv; + /* Return if the device is already closed * + * Can happen when s2io_card_up failed in change_mtu * + */ + if (!is_s2io_card_up(sp)) + return 0; + netif_stop_queue(dev); napi_disable(&sp->napi); /* Reset card, kill tasklet and free Tx and Rx buffers. */ @@ -6355,6 +6372,7 @@ static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) static int s2io_change_mtu(struct net_device *dev, int new_mtu) { struct s2io_nic *sp = dev->priv; + int ret = 0; if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) { DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", @@ -6366,9 +6384,11 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) if (netif_running(dev)) { s2io_card_down(sp); netif_stop_queue(dev); - if (s2io_card_up(sp)) { + ret = s2io_card_up(sp); + if (ret) { DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", __FUNCTION__); + return ret; } if (netif_queue_stopped(dev)) netif_wake_queue(dev); @@ -6379,7 +6399,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); } - return 0; + return ret; } /** @@ -6777,6 +6797,9 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io) unsigned long flags; register u64 val64 = 0; + if (!is_s2io_card_up(sp)) + return; + del_timer_sync(&sp->alarm_timer); /* If s2io_set_link task is executing, wait till it completes. */ while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) { @@ -6850,11 +6873,13 @@ static int s2io_card_up(struct s2io_nic * sp) u16 interruptible; /* Initialize the H/W I/O registers */ - if (init_nic(sp) != 0) { + ret = init_nic(sp); + if (ret != 0) { DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", dev->name); - s2io_reset(sp); - return -ENODEV; + if (ret != -EIO) + s2io_reset(sp); + return ret; } /* |