1 files changed, 27 insertions, 397 deletions

diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index 6791be90c2f..1bc6c48c96e 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -19,10 +19,7 @@
 #include "workarounds.h"
 #include "selftest.h"
 
-/* We expect these MMDs to be in the package.  SFT9001 also has a
- * clause 22 extension MMD, but since it doesn't have all the generic
- * MMD registers it is pointless to include it here.
- */
+/* We expect these MMDs to be in the package. */
 #define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD	| \
 				 MDIO_DEVS_PCS		| \
 				 MDIO_DEVS_PHYXS	| \
@@ -33,12 +30,6 @@
 			   (1 << LOOPBACK_PMAPMD) |	\
 			   (1 << LOOPBACK_PHYXS_WS))
 
-#define SFT9001_LOOPBACKS ((1 << LOOPBACK_GPHY) |	\
-			   (1 << LOOPBACK_PHYXS) |	\
-			   (1 << LOOPBACK_PCS) |	\
-			   (1 << LOOPBACK_PMAPMD) |	\
-			   (1 << LOOPBACK_PHYXS_WS))
-
 /* We complain if we fail to see the link partner as 10G capable this many
  * times in a row (must be > 1 as sampling the autoneg. registers is racy)
  */
@@ -50,9 +41,8 @@
 #define PMA_PMD_EXT_GMII_EN_WIDTH 1
 #define PMA_PMD_EXT_CLK_OUT_LBN	2
 #define PMA_PMD_EXT_CLK_OUT_WIDTH 1
-#define PMA_PMD_LNPGA_POWERDOWN_LBN 8	/* SFX7101 only */
+#define PMA_PMD_LNPGA_POWERDOWN_LBN 8
 #define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
-#define PMA_PMD_EXT_CLK312_LBN	8	/* SFT9001 only */
 #define PMA_PMD_EXT_CLK312_WIDTH 1
 #define PMA_PMD_EXT_LPOWER_LBN  12
 #define PMA_PMD_EXT_LPOWER_WIDTH 1
@@ -84,7 +74,6 @@
 #define PMA_PMD_LED_FLASH	(3)
 #define PMA_PMD_LED_MASK	3
 /* All LEDs under hardware control */
-#define SFT9001_PMA_PMD_LED_DEFAULT 0
 /* Green and Amber under hardware control, Red off */
 #define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
 
@@ -98,31 +87,7 @@
 #define PMA_PMD_SPEED_LBN        4
 #define PMA_PMD_SPEED_WIDTH      4
 
-/* Cable diagnostics - SFT9001 only */
-#define PMA_PMD_CDIAG_CTRL_REG  49213
-#define CDIAG_CTRL_IMMED_LBN    15
-#define CDIAG_CTRL_BRK_LINK_LBN 12
-#define CDIAG_CTRL_IN_PROG_LBN  11
-#define CDIAG_CTRL_LEN_UNIT_LBN 10
-#define CDIAG_CTRL_LEN_METRES   1
-#define PMA_PMD_CDIAG_RES_REG   49174
-#define CDIAG_RES_A_LBN         12
-#define CDIAG_RES_B_LBN         8
-#define CDIAG_RES_C_LBN         4
-#define CDIAG_RES_D_LBN         0
-#define CDIAG_RES_WIDTH         4
-#define CDIAG_RES_OPEN          2
-#define CDIAG_RES_OK            1
-#define CDIAG_RES_INVALID       0
-/* Set of 4 registers for pairs A-D */
-#define PMA_PMD_CDIAG_LEN_REG   49175
-
-/* Serdes control registers - SFT9001 only */
-#define PMA_PMD_CSERDES_CTRL_REG 64258
-/* Set the 156.25 MHz output to 312.5 MHz to drive Falcon's XMAC */
-#define PMA_PMD_CSERDES_DEFAULT	0x000f
-
-/* Misc register defines - SFX7101 only */
+/* Misc register defines */
 #define PCS_CLOCK_CTRL_REG	55297
 #define PLL312_RST_N_LBN 2
 
@@ -185,121 +150,17 @@ struct tenxpress_phy_data {
 	int bad_lp_tries;
 };
 
-static ssize_t show_phy_short_reach(struct device *dev,
-				    struct device_attribute *attr, char *buf)
-{
-	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
-	int reg;
-
-	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR);
-	return sprintf(buf, "%d\n", !!(reg & MDIO_PMA_10GBT_TXPWR_SHORT));
-}
-
-static ssize_t set_phy_short_reach(struct device *dev,
-				   struct device_attribute *attr,
-				   const char *buf, size_t count)
-{
-	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
-	int rc;
-
-	rtnl_lock();
-	if (efx->state != STATE_RUNNING) {
-		rc = -EBUSY;
-	} else {
-		efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
-				  MDIO_PMA_10GBT_TXPWR_SHORT,
-				  count != 0 && *buf != '0');
-		rc = efx_reconfigure_port(efx);
-	}
-	rtnl_unlock();
-
-	return rc < 0 ? rc : (ssize_t)count;
-}
-
-static DEVICE_ATTR(phy_short_reach, 0644, show_phy_short_reach,
-		   set_phy_short_reach);
-
-int sft9001_wait_boot(struct efx_nic *efx)
-{
-	unsigned long timeout = jiffies + HZ + 1;
-	int boot_stat;
-
-	for (;;) {
-		boot_stat = efx_mdio_read(efx, MDIO_MMD_PCS,
-					  PCS_BOOT_STATUS_REG);
-		if (boot_stat >= 0) {
-			netif_dbg(efx, hw, efx->net_dev,
-				  "PHY boot status = %#x\n", boot_stat);
-			switch (boot_stat &
-				((1 << PCS_BOOT_FATAL_ERROR_LBN) |
-				 (3 << PCS_BOOT_PROGRESS_LBN) |
-				 (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN) |
-				 (1 << PCS_BOOT_CODE_STARTED_LBN))) {
-			case ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
-			      (PCS_BOOT_PROGRESS_CHECKSUM <<
-			       PCS_BOOT_PROGRESS_LBN)):
-			case ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
-			      (PCS_BOOT_PROGRESS_INIT <<
-			       PCS_BOOT_PROGRESS_LBN) |
-			      (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN)):
-				return -EINVAL;
-			case ((PCS_BOOT_PROGRESS_WAIT_MDIO <<
-			       PCS_BOOT_PROGRESS_LBN) |
-			      (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN)):
-				return (efx->phy_mode & PHY_MODE_SPECIAL) ?
-					0 : -EIO;
-			case ((PCS_BOOT_PROGRESS_JUMP <<
-			       PCS_BOOT_PROGRESS_LBN) |
-			      (1 << PCS_BOOT_CODE_STARTED_LBN)):
-			case ((PCS_BOOT_PROGRESS_JUMP <<
-			       PCS_BOOT_PROGRESS_LBN) |
-			      (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN) |
-			      (1 << PCS_BOOT_CODE_STARTED_LBN)):
-				return (efx->phy_mode & PHY_MODE_SPECIAL) ?
-					-EIO : 0;
-			default:
-				if (boot_stat & (1 << PCS_BOOT_FATAL_ERROR_LBN))
-					return -EIO;
-				break;
-			}
-		}
-
-		if (time_after_eq(jiffies, timeout))
-			return -ETIMEDOUT;
-
-		msleep(50);
-	}
-}
-
 static int tenxpress_init(struct efx_nic *efx)
 {
-	int reg;
-
-	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		/* Enable 312.5 MHz clock */
-		efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
-			       1 << CLK312_EN_LBN);
-	} else {
-		/* Enable 312.5 MHz clock and GMII */
-		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
-		reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
-			(1 << PMA_PMD_EXT_CLK_OUT_LBN) |
-			(1 << PMA_PMD_EXT_CLK312_LBN) |
-			(1 << PMA_PMD_EXT_ROBUST_LBN));
-
-		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
-		efx_mdio_set_flag(efx, MDIO_MMD_C22EXT,
-			      GPHY_XCONTROL_REG, 1 << GPHY_ISOLATE_LBN,
-			      false);
-	}
+	/* Enable 312.5 MHz clock */
+	efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
+		       1 << CLK312_EN_LBN);
 
 	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
-	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG,
-				  1 << PMA_PMA_LED_ACTIVITY_LBN, true);
-		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG,
-			       SFX7101_PMA_PMD_LED_DEFAULT);
-	}
+	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG,
+			  1 << PMA_PMA_LED_ACTIVITY_LBN, true);
+	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG,
+		       SFX7101_PMA_PMD_LED_DEFAULT);
 
 	return 0;
 }
@@ -307,7 +168,6 @@ static int tenxpress_init(struct efx_nic *efx)
 static int tenxpress_phy_probe(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data;
-	int rc;
 
 	/* Allocate phy private storage */
 	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
@@ -316,42 +176,15 @@ static int tenxpress_phy_probe(struct efx_nic *efx)
 	efx->phy_data = phy_data;
 	phy_data->phy_mode = efx->phy_mode;
 
-	/* Create any special files */
-	if (efx->phy_type == PHY_TYPE_SFT9001B) {
-		rc = device_create_file(&efx->pci_dev->dev,
-					&dev_attr_phy_short_reach);
-		if (rc)
-			goto fail;
-	}
-
-	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
-		efx->mdio.mode_support = MDIO_SUPPORTS_C45;
-
-		efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
+	efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+	efx->mdio.mode_support = MDIO_SUPPORTS_C45;
 
-		efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
-					 ADVERTISED_10000baseT_Full);
-	} else {
-		efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
-		efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
 
-		efx->loopback_modes = (SFT9001_LOOPBACKS |
-				       FALCON_XMAC_LOOPBACKS | 
-				       FALCON_GMAC_LOOPBACKS);
-
-		efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
-					 ADVERTISED_10000baseT_Full |
-					 ADVERTISED_1000baseT_Full |
-					 ADVERTISED_100baseT_Full);
-	}
+	efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+				 ADVERTISED_10000baseT_Full);
 
 	return 0;
-
-fail:
-	kfree(efx->phy_data);
-	efx->phy_data = NULL;
-	return rc;
 }
 
 static int tenxpress_phy_init(struct efx_nic *efx)
@@ -361,16 +194,6 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	falcon_board(efx)->type->init_phy(efx);
 
 	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
-		if (efx->phy_type == PHY_TYPE_SFT9001A) {
-			int reg;
-			reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
-					    PMA_PMD_XCONTROL_REG);
-			reg |= (1 << PMA_PMD_EXT_SSR_LBN);
-			efx_mdio_write(efx, MDIO_MMD_PMAPMD,
-				       PMA_PMD_XCONTROL_REG, reg);
-			mdelay(200);
-		}
-
 		rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 		if (rc < 0)
 			return rc;
@@ -403,7 +226,7 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 {
 	int rc, reg;
 
-	/* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
+	/* The XGMAC clock is driven from the SFX7101 312MHz clock, so
 	 * a special software reset can glitch the XGMAC sufficiently for stats
 	 * requests to fail. */
 	falcon_stop_nic_stats(efx);
@@ -484,53 +307,18 @@ static bool sfx7101_link_ok(struct efx_nic *efx)
 				 MDIO_DEVS_PHYXS);
 }
 
-static bool sft9001_link_ok(struct efx_nic *efx, struct ethtool_cmd *ecmd)
-{
-	u32 reg;
-
-	if (efx_phy_mode_disabled(efx->phy_mode))
-		return false;
-	else if (efx->loopback_mode == LOOPBACK_GPHY)
-		return true;
-	else if (efx->loopback_mode)
-		return efx_mdio_links_ok(efx,
-					 MDIO_DEVS_PMAPMD |
-					 MDIO_DEVS_PHYXS);
-
-	/* We must use the same definition of link state as LASI,
-	 * otherwise we can miss a link state transition
-	 */
-	if (ecmd->speed == 10000) {
-		reg = efx_mdio_read(efx, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT1);
-		return reg & MDIO_PCS_10GBRT_STAT1_BLKLK;
-	} else {
-		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_STATUS_REG);
-		return reg & (1 << C22EXT_STATUS_LINK_LBN);
-	}
-}
-
 static void tenxpress_ext_loopback(struct efx_nic *efx)
 {
 	efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1,
 			  1 << LOOPBACK_NEAR_LBN,
 			  efx->loopback_mode == LOOPBACK_PHYXS);
-	if (efx->phy_type != PHY_TYPE_SFX7101)
-		efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, GPHY_XCONTROL_REG,
-				  1 << GPHY_LOOPBACK_NEAR_LBN,
-				  efx->loopback_mode == LOOPBACK_GPHY);
 }
 
 static void tenxpress_low_power(struct efx_nic *efx)
 {
-	if (efx->phy_type == PHY_TYPE_SFX7101)
-		efx_mdio_set_mmds_lpower(
-			efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
-			TENXPRESS_REQUIRED_DEVS);
-	else
-		efx_mdio_set_flag(
-			efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG,
-			1 << PMA_PMD_EXT_LPOWER_LBN,
-			!!(efx->phy_mode & PHY_MODE_LOW_POWER));
+	efx_mdio_set_mmds_lpower(
+		efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
+		TENXPRESS_REQUIRED_DEVS);
 }
 
 static int tenxpress_phy_reconfigure(struct efx_nic *efx)
@@ -550,12 +338,7 @@ static int tenxpress_phy_reconfigure(struct efx_nic *efx)
 
 	if (loop_reset || phy_mode_change) {
 		tenxpress_special_reset(efx);
-
-		/* Reset XAUI if we were in 10G, and are staying
-		 * in 10G. If we're moving into and out of 10G
-		 * then xaui will be reset anyway */
-		if (EFX_IS10G(efx))
-			falcon_reset_xaui(efx);
+		falcon_reset_xaui(efx);
 	}
 
 	tenxpress_low_power(efx);
@@ -578,29 +361,12 @@ static bool tenxpress_phy_poll(struct efx_nic *efx)
 {
 	struct efx_link_state old_state = efx->link_state;
 
-	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		efx->link_state.up = sfx7101_link_ok(efx);
-		efx->link_state.speed = 10000;
-		efx->link_state.fd = true;
-		efx->link_state.fc = efx_mdio_get_pause(efx);
-
-		sfx7101_check_bad_lp(efx, efx->link_state.up);
-	} else {
-		struct ethtool_cmd ecmd;
-
-		/* Check the LASI alarm first */
-		if (efx->loopback_mode == LOOPBACK_NONE &&
-		    !(efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT) &
-		      MDIO_PMA_LASI_LSALARM))
-			return false;
+	efx->link_state.up = sfx7101_link_ok(efx);
+	efx->link_state.speed = 10000;
+	efx->link_state.fd = true;
+	efx->link_state.fc = efx_mdio_get_pause(efx);
 
-		tenxpress_get_settings(efx, &ecmd);
-
-		efx->link_state.up = sft9001_link_ok(efx, &ecmd);
-		efx->link_state.speed = ecmd.speed;
-		efx->link_state.fd = (ecmd.duplex == DUPLEX_FULL);
-		efx->link_state.fc = efx_mdio_get_pause(efx);
-	}
+	sfx7101_check_bad_lp(efx, efx->link_state.up);
 
 	return !efx_link_state_equal(&efx->link_state, &old_state);
 }
@@ -621,10 +387,6 @@ static void sfx7101_phy_fini(struct efx_nic *efx)
 
 static void tenxpress_phy_remove(struct efx_nic *efx)
 {
-	if (efx->phy_type == PHY_TYPE_SFT9001B)
-		device_remove_file(&efx->pci_dev->dev,
-				   &dev_attr_phy_short_reach);
-
 	kfree(efx->phy_data);
 	efx->phy_data = NULL;
 }
@@ -647,10 +409,7 @@ void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
 			(PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN);
 		break;
 	default:
-		if (efx->phy_type == PHY_TYPE_SFX7101)
-			reg = SFX7101_PMA_PMD_LED_DEFAULT;
-		else
-			reg = SFT9001_PMA_PMD_LED_DEFAULT;
+		reg = SFX7101_PMA_PMD_LED_DEFAULT;
 		break;
 	}
 
@@ -685,102 +444,12 @@ sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 	return rc;
 }
 
-static const char *const sft9001_test_names[] = {
-	"bist",
-	"cable.pairA.status",
-	"cable.pairB.status",
-	"cable.pairC.status",
-	"cable.pairD.status",
-	"cable.pairA.length",
-	"cable.pairB.length",
-	"cable.pairC.length",
-	"cable.pairD.length",
-};
-
-static const char *sft9001_test_name(struct efx_nic *efx, unsigned int index)
-{
-	if (index < ARRAY_SIZE(sft9001_test_names))
-		return sft9001_test_names[index];
-	return NULL;
-}
-
-static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
-{
-	int rc = 0, rc2, i, ctrl_reg, res_reg;
-
-	/* Initialise cable diagnostic results to unknown failure */
-	for (i = 1; i < 9; ++i)
-		results[i] = -1;
-
-	/* Run cable diagnostics; wait up to 5 seconds for them to complete.
-	 * A cable fault is not a self-test failure, but a timeout is. */
-	ctrl_reg = ((1 << CDIAG_CTRL_IMMED_LBN) |
-		    (CDIAG_CTRL_LEN_METRES << CDIAG_CTRL_LEN_UNIT_LBN));
-	if (flags & ETH_TEST_FL_OFFLINE) {
-		/* Break the link in order to run full diagnostics.  We
-		 * must reset the PHY to resume normal service. */
-		ctrl_reg |= (1 << CDIAG_CTRL_BRK_LINK_LBN);
-	}
-	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_CTRL_REG,
-		       ctrl_reg);
-	i = 0;
-	while (efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_CTRL_REG) &
-	       (1 << CDIAG_CTRL_IN_PROG_LBN)) {
-		if (++i == 50) {
-			rc = -ETIMEDOUT;
-			goto out;
-		}
-		msleep(100);
-	}
-	res_reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_RES_REG);
-	for (i = 0; i < 4; i++) {
-		int pair_res =
-			(res_reg >> (CDIAG_RES_A_LBN - i * CDIAG_RES_WIDTH))
-			& ((1 << CDIAG_RES_WIDTH) - 1);
-		int len_reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
-					    PMA_PMD_CDIAG_LEN_REG + i);
-		if (pair_res == CDIAG_RES_OK)
-			results[1 + i] = 1;
-		else if (pair_res == CDIAG_RES_INVALID)
-			results[1 + i] = -1;
-		else
-			results[1 + i] = -pair_res;
-		if (pair_res != CDIAG_RES_INVALID &&
-		    pair_res != CDIAG_RES_OPEN &&
-		    len_reg != 0xffff)
-			results[5 + i] = len_reg;
-	}
-
-out:
-	if (flags & ETH_TEST_FL_OFFLINE) {
-		/* Reset, running the BIST and then resuming normal service. */
-		rc2 = tenxpress_special_reset(efx);
-		results[0] = rc2 ? -1 : 1;
-		if (!rc)
-			rc = rc2;
-
-		efx_mdio_an_reconfigure(efx);
-	}
-
-	return rc;
-}
-
 static void
 tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
 	u32 adv = 0, lpa = 0;
 	int reg;
 
-	if (efx->phy_type != PHY_TYPE_SFX7101) {
-		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_CTRL);
-		if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
-			adv |= ADVERTISED_1000baseT_Full;
-		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_STATUS);
-		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
-			lpa |= ADVERTISED_1000baseT_Half;
-		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
-			lpa |= ADVERTISED_1000baseT_Full;
-	}
 	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL);
 	if (reg & MDIO_AN_10GBT_CTRL_ADV10G)
 		adv |= ADVERTISED_10000baseT_Full;
@@ -790,23 +459,9 @@ tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 
 	mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa);
 
-	if (efx->phy_type != PHY_TYPE_SFX7101) {
-		ecmd->supported |= (SUPPORTED_100baseT_Full |
-				    SUPPORTED_1000baseT_Full);
-		if (ecmd->speed != SPEED_10000) {
-			ecmd->eth_tp_mdix =
-				(efx_mdio_read(efx, MDIO_MMD_PMAPMD,
-					       PMA_PMD_XSTATUS_REG) &
-				 (1 << PMA_PMD_XSTAT_MDIX_LBN))
-				? ETH_TP_MDI_X : ETH_TP_MDI;
-		}
-	}
-
 	/* In loopback, the PHY automatically brings up the correct interface,
 	 * but doesn't advertise the correct speed. So override it */
-	if (efx->loopback_mode == LOOPBACK_GPHY)
-		ecmd->speed = SPEED_1000;
-	else if (LOOPBACK_EXTERNAL(efx))
+	if (LOOPBACK_EXTERNAL(efx))
 		ecmd->speed = SPEED_10000;
 }
 
@@ -825,16 +480,6 @@ static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
 			  advertising & ADVERTISED_10000baseT_Full);
 }
 
-static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
-{
-	efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_CTRL,
-			  1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
-			  advertising & ADVERTISED_1000baseT_Full);
-	efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-			  MDIO_AN_10GBT_CTRL_ADV10G,
-			  advertising & ADVERTISED_10000baseT_Full);
-}
-
 struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.probe		  = tenxpress_phy_probe,
 	.init             = tenxpress_phy_init,
@@ -849,18 +494,3 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.test_name	  = sfx7101_test_name,
 	.run_tests	  = sfx7101_run_tests,
 };
-
-struct efx_phy_operations falcon_sft9001_phy_ops = {
-	.probe		  = tenxpress_phy_probe,
-	.init             = tenxpress_phy_init,
-	.reconfigure      = tenxpress_phy_reconfigure,
-	.poll             = tenxpress_phy_poll,
-	.fini             = efx_port_dummy_op_void,
-	.remove		  = tenxpress_phy_remove,
-	.get_settings	  = tenxpress_get_settings,
-	.set_settings	  = tenxpress_set_settings,
-	.set_npage_adv    = sft9001_set_npage_adv,
-	.test_alive	  = efx_mdio_test_alive,
-	.test_name	  = sft9001_test_name,
-	.run_tests	  = sft9001_run_tests,
-};