1 files changed, 77 insertions, 136 deletions

diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index 9ecb77da954..f0efd246962 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -67,6 +67,8 @@
 #define PMA_PMD_EXT_CLK312_WIDTH 1
 #define PMA_PMD_EXT_LPOWER_LBN  12
 #define PMA_PMD_EXT_LPOWER_WIDTH 1
+#define PMA_PMD_EXT_ROBUST_LBN	14
+#define PMA_PMD_EXT_ROBUST_WIDTH 1
 #define PMA_PMD_EXT_SSR_LBN	15
 #define PMA_PMD_EXT_SSR_WIDTH	1
 
@@ -177,35 +179,24 @@
 #define C22EXT_STATUS_LINK_LBN  2
 #define C22EXT_STATUS_LINK_WIDTH 1
 
-#define C22EXT_MSTSLV_REG       49162
-#define C22EXT_MSTSLV_1000_HD_LBN 10
-#define C22EXT_MSTSLV_1000_HD_WIDTH 1
-#define C22EXT_MSTSLV_1000_FD_LBN 11
-#define C22EXT_MSTSLV_1000_FD_WIDTH 1
+#define C22EXT_MSTSLV_CTRL			49161
+#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN	8
+#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN	9
+
+#define C22EXT_MSTSLV_STATUS			49162
+#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN	10
+#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN	11
 
 /* Time to wait between powering down the LNPGA and turning off the power
  * rails */
 #define LNPGA_PDOWN_WAIT	(HZ / 5)
 
-static int crc_error_reset_threshold = 100;
-module_param(crc_error_reset_threshold, int, 0644);
-MODULE_PARM_DESC(crc_error_reset_threshold,
-		 "Max number of CRC errors before XAUI reset");
-
 struct tenxpress_phy_data {
 	enum efx_loopback_mode loopback_mode;
-	atomic_t bad_crc_count;
 	enum efx_phy_mode phy_mode;
 	int bad_lp_tries;
 };
 
-void tenxpress_crc_err(struct efx_nic *efx)
-{
-	struct tenxpress_phy_data *phy_data = efx->phy_data;
-	if (phy_data != NULL)
-		atomic_inc(&phy_data->bad_crc_count);
-}
-
 static ssize_t show_phy_short_reach(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
@@ -284,7 +275,9 @@ static int tenxpress_init(struct efx_nic *efx)
 					 PMA_PMD_XCONTROL_REG);
 		reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
 			(1 << PMA_PMD_EXT_CLK_OUT_LBN) |
-			(1 << PMA_PMD_EXT_CLK312_LBN));
+			(1 << PMA_PMD_EXT_CLK312_LBN) |
+			(1 << PMA_PMD_EXT_ROBUST_LBN));
+
 		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
 				    PMA_PMD_XCONTROL_REG, reg);
 		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
@@ -346,6 +339,7 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		goto fail;
+	mdio_clause45_set_pause(efx);
 
 	if (efx->phy_type == PHY_TYPE_SFT9001B) {
 		rc = device_create_file(&efx->pci_dev->dev,
@@ -376,8 +370,8 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 
 	/* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
 	 * a special software reset can glitch the XGMAC sufficiently for stats
-	 * requests to fail. Since we don't often special_reset, just lock. */
-	spin_lock(&efx->stats_lock);
+	 * requests to fail. */
+	efx_stats_disable(efx);
 
 	/* Initiate reset */
 	reg = mdio_clause45_read(efx, efx->mii.phy_id,
@@ -392,17 +386,17 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 	rc = mdio_clause45_wait_reset_mmds(efx,
 					   TENXPRESS_REQUIRED_DEVS);
 	if (rc < 0)
-		goto unlock;
+		goto out;
 
 	/* Try and reconfigure the device */
 	rc = tenxpress_init(efx);
 	if (rc < 0)
-		goto unlock;
+		goto out;
 
 	/* Wait for the XGXS state machine to churn */
 	mdelay(10);
-unlock:
-	spin_unlock(&efx->stats_lock);
+out:
+	efx_stats_enable(efx);
 	return rc;
 }
 
@@ -520,7 +514,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	struct ethtool_cmd ecmd;
-	bool phy_mode_change, loop_reset, loop_toggle, loopback;
+	bool phy_mode_change, loop_reset;
 
 	if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
 		phy_data->phy_mode = efx->phy_mode;
@@ -531,12 +525,10 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 
 	phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
 			   phy_data->phy_mode != PHY_MODE_NORMAL);
-	loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks;
-	loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks);
 	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) ||
 		      LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
 
-	if (loop_reset || loop_toggle || loopback || phy_mode_change) {
+	if (loop_reset || phy_mode_change) {
 		int rc;
 
 		efx->phy_op->get_settings(efx, &ecmd);
@@ -551,20 +543,6 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 				falcon_reset_xaui(efx);
 		}
 
-		if (efx->phy_type != PHY_TYPE_SFX7101) {
-			/* Only change autoneg once, on coming out or
-			 * going into loopback */
-			if (loop_toggle)
-				ecmd.autoneg = !loopback;
-			if (loopback) {
-				ecmd.duplex = DUPLEX_FULL;
-				if (efx->loopback_mode == LOOPBACK_GPHY)
-					ecmd.speed = SPEED_1000;
-				else
-					ecmd.speed = SPEED_10000;
-			}
-		}
-
 		rc = efx->phy_op->set_settings(efx, &ecmd);
 		WARN_ON(rc);
 	}
@@ -623,13 +601,6 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 
 	if (phy_data->phy_mode != PHY_MODE_NORMAL)
 		return;
-
-	if (EFX_WORKAROUND_10750(efx) &&
-	    atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
-		EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
-		falcon_reset_xaui(efx);
-		atomic_set(&phy_data->bad_crc_count, 0);
-	}
 }
 
 static void tenxpress_phy_fini(struct efx_nic *efx)
@@ -772,107 +743,76 @@ reset:
 	return rc;
 }
 
-static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx)
+static void
+tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy = efx->mii.phy_id;
-	u32 lpa = 0;
+	int phy_id = efx->mii.phy_id;
+	u32 adv = 0, lpa = 0;
 	int reg;
 
 	if (efx->phy_type != PHY_TYPE_SFX7101) {
-		reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT,
-					 C22EXT_MSTSLV_REG);
-		if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN))
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+					 C22EXT_MSTSLV_CTRL);
+		if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
+			adv |= ADVERTISED_1000baseT_Full;
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+					 C22EXT_MSTSLV_STATUS);
+		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
 			lpa |= ADVERTISED_1000baseT_Half;
-		if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN))
+		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
 			lpa |= ADVERTISED_1000baseT_Full;
 	}
-	reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS);
+	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+				 MDIO_AN_10GBT_CTRL);
+	if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN))
+		adv |= ADVERTISED_10000baseT_Full;
+	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+				 MDIO_AN_10GBT_STATUS);
 	if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
 		lpa |= ADVERTISED_10000baseT_Full;
-	return lpa;
-}
 
-static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
-{
-	mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full,
-				       tenxpress_get_xnp_lpa(efx));
-	ecmd->supported |= SUPPORTED_10000baseT_Full;
-	ecmd->advertising |= ADVERTISED_10000baseT_Full;
+	mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa);
+
+	if (efx->phy_type != PHY_TYPE_SFX7101)
+		ecmd->supported |= (SUPPORTED_100baseT_Full |
+				    SUPPORTED_1000baseT_Full);
+
+	/* In loopback, the PHY automatically brings up the correct interface,
+	 * but doesn't advertise the correct speed. So override it */
+	if (efx->loopback_mode == LOOPBACK_GPHY)
+		ecmd->speed = SPEED_1000;
+	else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
+		ecmd->speed = SPEED_10000;
 }
 
-static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
-	u32 xnp_adv = 0;
-	int reg;
-
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 PMA_PMD_SPEED_ENABLE_REG);
-	if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN)))
-		xnp_adv |= ADVERTISED_100baseT_Full;
-	if (reg & (1 << PMA_PMD_1000T_ADV_LBN))
-		xnp_adv |= ADVERTISED_1000baseT_Full;
-	if (reg & (1 << PMA_PMD_10000T_ADV_LBN))
-		xnp_adv |= ADVERTISED_10000baseT_Full;
-
-	mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv,
-				       tenxpress_get_xnp_lpa(efx));
-
-	ecmd->supported |= (SUPPORTED_100baseT_Half |
-			    SUPPORTED_100baseT_Full |
-			    SUPPORTED_1000baseT_Full);
+	if (!ecmd->autoneg)
+		return -EINVAL;
 
-	/* Use the vendor defined C22ext register for duplex settings */
-	if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 GPHY_XCONTROL_REG);
-		ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ?
-				DUPLEX_FULL : DUPLEX_HALF);
-	}
+	return mdio_clause45_set_settings(efx, ecmd);
 }
 
-static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	int phy_id = efx->mii.phy_id;
-	int rc;
-
-	rc = mdio_clause45_set_settings(efx, ecmd);
-	if (rc)
-		return rc;
-
-	if (ecmd->speed != SPEED_10000 && !ecmd->autoneg)
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-				       GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN,
-				       ecmd->duplex == DUPLEX_FULL);
-
-	return rc;
+	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
+			       MDIO_AN_10GBT_CTRL,
+			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+			       advertising & ADVERTISED_10000baseT_Full);
 }
 
-static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising)
+static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	int phy = efx->mii.phy_id;
-	int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD,
-				     PMA_PMD_SPEED_ENABLE_REG);
-	bool enabled;
-
-	reg &= ~((1 << 2) | (1 << 3));
-	if (EFX_WORKAROUND_13204(efx) &&
-	    (advertising & ADVERTISED_100baseT_Full))
-		reg |= 1 << PMA_PMD_100TX_ADV_LBN;
-	if (advertising & ADVERTISED_1000baseT_Full)
-		reg |= 1 << PMA_PMD_1000T_ADV_LBN;
-	if (advertising & ADVERTISED_10000baseT_Full)
-		reg |= 1 << PMA_PMD_10000T_ADV_LBN;
-	mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD,
-			    PMA_PMD_SPEED_ENABLE_REG, reg);
-
-	enabled = (advertising &
-		   (ADVERTISED_1000baseT_Half |
-		    ADVERTISED_1000baseT_Full |
-		    ADVERTISED_10000baseT_Full));
-	if (EFX_WORKAROUND_13204(efx))
-		enabled |= (advertising & ADVERTISED_100baseT_Full);
-	return enabled;
+	int phy_id = efx->mii.phy_id;
+
+	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+			       C22EXT_MSTSLV_CTRL,
+			       C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
+			       advertising & ADVERTISED_1000baseT_Full);
+	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+			       MDIO_AN_10GBT_CTRL,
+			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+			       advertising & ADVERTISED_10000baseT_Full);
 }
 
 struct efx_phy_operations falcon_sfx7101_phy_ops = {
@@ -882,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.poll             = tenxpress_phy_poll,
 	.fini             = tenxpress_phy_fini,
 	.clear_interrupt  = efx_port_dummy_op_void,
-	.get_settings	  = sfx7101_get_settings,
-	.set_settings	  = mdio_clause45_set_settings,
+	.get_settings	  = tenxpress_get_settings,
+	.set_settings	  = tenxpress_set_settings,
+	.set_npage_adv    = sfx7101_set_npage_adv,
 	.num_tests	  = ARRAY_SIZE(sfx7101_test_names),
 	.test_names	  = sfx7101_test_names,
 	.run_tests	  = sfx7101_run_tests,
@@ -898,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = {
 	.poll             = tenxpress_phy_poll,
 	.fini             = tenxpress_phy_fini,
 	.clear_interrupt  = efx_port_dummy_op_void,
-	.get_settings	  = sft9001_get_settings,
-	.set_settings	  = sft9001_set_settings,
-	.set_xnp_advertise = sft9001_set_xnp_advertise,
+	.get_settings	  = tenxpress_get_settings,
+	.set_settings	  = tenxpress_set_settings,
+	.set_npage_adv    = sft9001_set_npage_adv,
 	.num_tests	  = ARRAY_SIZE(sft9001_test_names),
 	.test_names	  = sft9001_test_names,
 	.run_tests	  = sft9001_run_tests,