diff options
Diffstat (limited to 'drivers/net/sfc/tenxpress.c')
-rw-r--r-- | drivers/net/sfc/tenxpress.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index c0146061c32..b92b24bba9e 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -122,7 +122,7 @@ struct tenxpress_phy_data { enum tenxpress_state state; enum efx_loopback_mode loopback_mode; atomic_t bad_crc_count; - int tx_disabled; + bool tx_disabled; int bad_lp_tries; }; @@ -274,7 +274,7 @@ static int tenxpress_special_reset(struct efx_nic *efx) return 0; } -static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp) +static void tenxpress_set_bad_lp(struct efx_nic *efx, bool bad_lp) { struct tenxpress_phy_data *pd = efx->phy_data; int reg; @@ -311,15 +311,15 @@ static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp) * into a non-10GBT port and if so warn the user that they won't get * link any time soon as we are 10GBT only, unless caller specified * not to do this check (it isn't useful in loopback) */ -static int tenxpress_link_ok(struct efx_nic *efx, int check_lp) +static bool tenxpress_link_ok(struct efx_nic *efx, bool check_lp) { - int ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS); + bool ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS); if (ok) { - tenxpress_set_bad_lp(efx, 0); + tenxpress_set_bad_lp(efx, false); } else if (check_lp) { /* Are we plugged into the wrong sort of link? */ - int bad_lp = 0; + bool bad_lp = false; int phy_id = efx->mii.phy_id; int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_AN_STATUS); @@ -332,7 +332,7 @@ static int tenxpress_link_ok(struct efx_nic *efx, int check_lp) * bit has the advantage of not clearing when autoneg * restarts. */ if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) { - tenxpress_set_bad_lp(efx, 0); + tenxpress_set_bad_lp(efx, false); return ok; } @@ -367,8 +367,8 @@ static void tenxpress_phyxs_loopback(struct efx_nic *efx) static void tenxpress_phy_reconfigure(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; - int loop_change = LOOPBACK_OUT_OF(phy_data, efx, - TENXPRESS_LOOPBACKS); + bool loop_change = LOOPBACK_OUT_OF(phy_data, efx, + TENXPRESS_LOOPBACKS); if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL)) return; @@ -388,7 +388,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) phy_data->tx_disabled = efx->tx_disabled; phy_data->loopback_mode = efx->loopback_mode; - efx->link_up = tenxpress_link_ok(efx, 0); + efx->link_up = tenxpress_link_ok(efx, false); efx->link_options = GM_LPA_10000FULL; } @@ -402,10 +402,10 @@ static void tenxpress_phy_clear_interrupt(struct efx_nic *efx) static int tenxpress_phy_check_hw(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; - int phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL); - int link_ok; + bool phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL); + bool link_ok; - link_ok = phy_up && tenxpress_link_ok(efx, 1); + link_ok = phy_up && tenxpress_link_ok(efx, true); if (link_ok != efx->link_up) falcon_xmac_sim_phy_event(efx); @@ -444,7 +444,7 @@ static void tenxpress_phy_fini(struct efx_nic *efx) /* Set the RX and TX LEDs and Link LED flashing. The other LEDs * (which probably aren't wired anyway) are left in AUTO mode */ -void tenxpress_phy_blink(struct efx_nic *efx, int blink) +void tenxpress_phy_blink(struct efx_nic *efx, bool blink) { int reg; |