diff options
Diffstat (limited to 'drivers/net/sis900.c')
| -rw-r--r-- | drivers/net/sis900.c | 29 |
1 files changed, 22 insertions, 7 deletions
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 84d4167eee9..484f795a779 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -240,7 +240,8 @@ static const struct ethtool_ops sis900_ethtool_ops; * @net_dev: the net device to get address for * * Older SiS900 and friends, use EEPROM to store MAC address. - * MAC address is read from read_eeprom() into @net_dev->dev_addr. + * MAC address is read from read_eeprom() into @net_dev->dev_addr and + * @net_dev->perm_addr. */ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev) @@ -261,6 +262,9 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de for (i = 0; i < 3; i++) ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); + /* Store MAC Address in perm_addr */ + memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); + return 1; } @@ -271,7 +275,8 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de * * SiS630E model, use APC CMOS RAM to store MAC address. * APC CMOS RAM is accessed through ISA bridge. - * MAC address is read into @net_dev->dev_addr. + * MAC address is read into @net_dev->dev_addr and + * @net_dev->perm_addr. */ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, @@ -296,6 +301,10 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, outb(0x09 + i, 0x70); ((u8 *)(net_dev->dev_addr))[i] = inb(0x71); } + + /* Store MAC Address in perm_addr */ + memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); + pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40); pci_dev_put(isa_bridge); @@ -310,7 +319,7 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, * * SiS635 model, set MAC Reload Bit to load Mac address from APC * to rfdr. rfdr is accessed through rfcr. MAC address is read into - * @net_dev->dev_addr. + * @net_dev->dev_addr and @net_dev->perm_addr. */ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, @@ -334,6 +343,9 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, *( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr); } + /* Store MAC Address in perm_addr */ + memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); + /* enable packet filtering */ outl(rfcrSave | RFEN, rfcr + ioaddr); @@ -353,7 +365,7 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, * EEDONE signal to refuse EEPROM access by LAN. * The EEPROM map of SiS962 or SiS963 is different to SiS900. * The signature field in SiS962 or SiS963 spec is meaningless. - * MAC address is read into @net_dev->dev_addr. + * MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr. */ static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, @@ -372,6 +384,9 @@ static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, for (i = 0; i < 3; i++) ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); + /* Store MAC Address in perm_addr */ + memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); + outl(EEDONE, ee_addr); return 1; } else { @@ -1180,7 +1195,7 @@ sis900_init_rx_ring(struct net_device *net_dev) * * 630E equalizer workaround rule(Cyrus Huang 08/15) * PHY register 14h(Test) - * Bit 14: 0 -- Automatically dectect (default) + * Bit 14: 0 -- Automatically detect (default) * 1 -- Manually set Equalizer filter * Bit 13: 0 -- (Default) * 1 -- Speed up convergence of equalizer setting @@ -1192,7 +1207,7 @@ sis900_init_rx_ring(struct net_device *net_dev) * Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0 * Link Off:Set Bit 13 to 1, Bit 14 to 0 * Calculate Equalizer value: - * When Link is ON and Bit 14 is 0, SIS900PHY will auto-dectect proper equalizer value. + * When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value. * When the equalizer is stable, this value is not a fixed value. It will be within * a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9) * 0 <= max <= 4 --> set equalizer to max @@ -1723,7 +1738,7 @@ static int sis900_rx(struct net_device *net_dev) rx_size = data_size - CRC_SIZE; #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) - /* ``TOOLONG'' flag means jumbo packet recived. */ + /* ``TOOLONG'' flag means jumbo packet received. */ if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE) rx_status &= (~ ((unsigned int)TOOLONG)); #endif |