summaryrefslogtreecommitdiffstats
path: root/drivers/net/sis900.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sis900.c')
-rw-r--r--drivers/net/sis900.c29
1 files changed, 22 insertions, 7 deletions
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 84d4167eee9..484f795a779 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -240,7 +240,8 @@ static const struct ethtool_ops sis900_ethtool_ops;
* @net_dev: the net device to get address for
*
* Older SiS900 and friends, use EEPROM to store MAC address.
- * MAC address is read from read_eeprom() into @net_dev->dev_addr.
+ * MAC address is read from read_eeprom() into @net_dev->dev_addr and
+ * @net_dev->perm_addr.
*/
static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
@@ -261,6 +262,9 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
for (i = 0; i < 3; i++)
((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
+ /* Store MAC Address in perm_addr */
+ memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
return 1;
}
@@ -271,7 +275,8 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
*
* SiS630E model, use APC CMOS RAM to store MAC address.
* APC CMOS RAM is accessed through ISA bridge.
- * MAC address is read into @net_dev->dev_addr.
+ * MAC address is read into @net_dev->dev_addr and
+ * @net_dev->perm_addr.
*/
static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
@@ -296,6 +301,10 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
outb(0x09 + i, 0x70);
((u8 *)(net_dev->dev_addr))[i] = inb(0x71);
}
+
+ /* Store MAC Address in perm_addr */
+ memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40);
pci_dev_put(isa_bridge);
@@ -310,7 +319,7 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
*
* SiS635 model, set MAC Reload Bit to load Mac address from APC
* to rfdr. rfdr is accessed through rfcr. MAC address is read into
- * @net_dev->dev_addr.
+ * @net_dev->dev_addr and @net_dev->perm_addr.
*/
static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
@@ -334,6 +343,9 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
*( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr);
}
+ /* Store MAC Address in perm_addr */
+ memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
/* enable packet filtering */
outl(rfcrSave | RFEN, rfcr + ioaddr);
@@ -353,7 +365,7 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
* EEDONE signal to refuse EEPROM access by LAN.
* The EEPROM map of SiS962 or SiS963 is different to SiS900.
* The signature field in SiS962 or SiS963 spec is meaningless.
- * MAC address is read into @net_dev->dev_addr.
+ * MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr.
*/
static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
@@ -372,6 +384,9 @@ static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
for (i = 0; i < 3; i++)
((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
+ /* Store MAC Address in perm_addr */
+ memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
outl(EEDONE, ee_addr);
return 1;
} else {
@@ -1180,7 +1195,7 @@ sis900_init_rx_ring(struct net_device *net_dev)
*
* 630E equalizer workaround rule(Cyrus Huang 08/15)
* PHY register 14h(Test)
- * Bit 14: 0 -- Automatically dectect (default)
+ * Bit 14: 0 -- Automatically detect (default)
* 1 -- Manually set Equalizer filter
* Bit 13: 0 -- (Default)
* 1 -- Speed up convergence of equalizer setting
@@ -1192,7 +1207,7 @@ sis900_init_rx_ring(struct net_device *net_dev)
* Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0
* Link Off:Set Bit 13 to 1, Bit 14 to 0
* Calculate Equalizer value:
- * When Link is ON and Bit 14 is 0, SIS900PHY will auto-dectect proper equalizer value.
+ * When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value.
* When the equalizer is stable, this value is not a fixed value. It will be within
* a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9)
* 0 <= max <= 4 --> set equalizer to max
@@ -1723,7 +1738,7 @@ static int sis900_rx(struct net_device *net_dev)
rx_size = data_size - CRC_SIZE;
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
- /* ``TOOLONG'' flag means jumbo packet recived. */
+ /* ``TOOLONG'' flag means jumbo packet received. */
if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE)
rx_status &= (~ ((unsigned int)TOOLONG));
#endif