diff options
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r-- | drivers/net/sky2.c | 163 |
1 files changed, 108 insertions, 55 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6b5946fe8ae..daf961ab68b 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -50,7 +50,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.22" +#define DRV_VERSION "1.23" #define PFX DRV_NAME " " /* @@ -65,9 +65,9 @@ #define RX_DEF_PENDING RX_MAX_PENDING #define TX_RING_SIZE 512 -#define TX_DEF_PENDING (TX_RING_SIZE - 1) -#define TX_MIN_PENDING 64 +#define TX_DEF_PENDING 128 #define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS) +#define TX_MIN_PENDING (MAX_SKB_TX_LE+1) #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) @@ -1151,7 +1151,14 @@ stopped: /* reset the Rx prefetch unit */ sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); - mmiowb(); + + /* Reset the RAM Buffer receive queue */ + sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET); + + /* Reset Rx MAC FIFO */ + sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET); + + sky2_read8(hw, B0_CTST); } /* Clean out receive buffer area, assumes receiver hardware stopped */ @@ -1169,6 +1176,7 @@ static void sky2_rx_clean(struct sky2_port *sky2) re->skb = NULL; } } + skb_queue_purge(&sky2->rx_recycle); } /* Basic MII support */ @@ -1245,6 +1253,12 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp } #endif +/* Amount of required worst case padding in rx buffer */ +static inline unsigned sky2_rx_pad(const struct sky2_hw *hw) +{ + return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2; +} + /* * Allocate an skb for receiving. If the MTU is large enough * make the skb non-linear with a fragment list of pages. @@ -1254,6 +1268,13 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) struct sk_buff *skb; int i; + skb = __skb_dequeue(&sky2->rx_recycle); + if (!skb) + skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + + sky2_rx_pad(sky2->hw)); + if (!skb) + goto nomem; + if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) { unsigned char *start; /* @@ -1262,18 +1283,10 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) * The buffer returned from netdev_alloc_skb is * aligned except if slab debugging is enabled. */ - skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + 8); - if (!skb) - goto nomem; start = PTR_ALIGN(skb->data, 8); skb_reserve(skb, start - skb->data); - } else { - skb = netdev_alloc_skb(sky2->netdev, - sky2->rx_data_size + NET_IP_ALIGN); - if (!skb) - goto nomem; + } else skb_reserve(skb, NET_IP_ALIGN); - } for (i = 0; i < sky2->rx_nfrags; i++) { struct page *page = alloc_page(GFP_ATOMIC); @@ -1350,6 +1363,8 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2->rx_data_size = size; + skb_queue_head_init(&sky2->rx_recycle); + /* Fill Rx ring */ for (i = 0; i < sky2->rx_pending; i++) { re = sky2->rx_ring + i; @@ -1488,6 +1503,7 @@ static int sky2_up(struct net_device *dev) imask = sky2_read32(hw, B0_IMSK); imask |= portirq_msk[port]; sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); sky2_set_multicast(dev); @@ -1756,14 +1772,22 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) } if (le->ctrl & EOP) { + struct sk_buff *skb = re->skb; + if (unlikely(netif_msg_tx_done(sky2))) printk(KERN_DEBUG "%s: tx done %u\n", dev->name, idx); dev->stats.tx_packets++; - dev->stats.tx_bytes += re->skb->len; + dev->stats.tx_bytes += skb->len; + + if (skb_queue_len(&sky2->rx_recycle) < sky2->rx_pending + && skb_recycle_check(skb, sky2->rx_data_size + + sky2_rx_pad(sky2->hw))) + __skb_queue_head(&sky2->rx_recycle, skb); + else + dev_kfree_skb_any(skb); - dev_kfree_skb_any(re->skb); sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE); } } @@ -1805,10 +1829,10 @@ static int sky2_down(struct net_device *dev) imask = sky2_read32(hw, B0_IMSK); imask &= ~portirq_msk[port]; sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); - synchronize_irq(hw->pdev->irq); - - sky2_gmac_reset(hw, port); + /* Force flow control off */ + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); /* Stop transmitter */ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); @@ -1821,9 +1845,6 @@ static int sky2_down(struct net_device *dev) ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); - /* Make sure no packets are pending */ - napi_synchronize(&hw->napi); - sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); /* Workaround shared GMAC reset */ @@ -1854,6 +1875,15 @@ static int sky2_down(struct net_device *dev) sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + /* Force any delayed status interrrupt and NAPI */ + sky2_write32(hw, STAT_LEV_TIMER_CNT, 0); + sky2_write32(hw, STAT_TX_TIMER_CNT, 0); + sky2_write32(hw, STAT_ISR_TIMER_CNT, 0); + sky2_read8(hw, STAT_ISR_TIMER_CTRL); + + synchronize_irq(hw->pdev->irq); + napi_synchronize(&hw->napi); + sky2_phy_power_down(hw, port); /* turn off LED's */ @@ -2343,11 +2373,45 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) } } +static inline void sky2_skb_rx(const struct sky2_port *sky2, + u32 status, struct sk_buff *skb) +{ +#ifdef SKY2_VLAN_TAG_USED + u16 vlan_tag = be16_to_cpu(sky2->rx_tag); + if (sky2->vlgrp && (status & GMR_FS_VLAN)) { + if (skb->ip_summed == CHECKSUM_NONE) + vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag); + else + vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp, + vlan_tag, skb); + return; + } +#endif + if (skb->ip_summed == CHECKSUM_NONE) + netif_receive_skb(skb); + else + napi_gro_receive(&sky2->hw->napi, skb); +} + +static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port, + unsigned packets, unsigned bytes) +{ + if (packets) { + struct net_device *dev = hw->dev[port]; + + dev->stats.rx_packets += packets; + dev->stats.rx_bytes += bytes; + dev->last_rx = jiffies; + sky2_rx_update(netdev_priv(dev), rxqaddr[port]); + } +} + /* Process status response ring */ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) { int work_done = 0; - unsigned rx[2] = { 0, 0 }; + unsigned int total_bytes[2] = { 0 }; + unsigned int total_packets[2] = { 0 }; rmb(); do { @@ -2374,7 +2438,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) le->opcode = 0; switch (opcode & ~HW_OWNER) { case OP_RXSTAT: - ++rx[port]; + total_packets[port]++; + total_bytes[port] += length; skb = sky2_receive(dev, length, status); if (unlikely(!skb)) { dev->stats.rx_dropped++; @@ -2392,18 +2457,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) } skb->protocol = eth_type_trans(skb, dev); - dev->stats.rx_packets++; - dev->stats.rx_bytes += skb->len; - dev->last_rx = jiffies; -#ifdef SKY2_VLAN_TAG_USED - if (sky2->vlgrp && (status & GMR_FS_VLAN)) { - vlan_hwaccel_receive_skb(skb, - sky2->vlgrp, - be16_to_cpu(sky2->rx_tag)); - } else -#endif - netif_receive_skb(skb); + sky2_skb_rx(sky2, status, skb); /* Stop after net poll weight */ if (++work_done >= to_do) @@ -2440,7 +2495,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) if (likely(status >> 16 == (status & 0xffff))) { skb = sky2->rx_ring[sky2->rx_next].skb; skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = status & 0xffff; + skb->csum = le16_to_cpu(status); } else { printk(KERN_NOTICE PFX "%s: hardware receive " "checksum problem (status = %#x)\n", @@ -2473,11 +2528,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); exit_loop: - if (rx[0]) - sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1); - - if (rx[1]) - sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2); + sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]); + sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]); return work_done; } @@ -4364,6 +4416,22 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out; } + /* Get configuration information + * Note: only regular PCI config access once to test for HW issues + * other PCI access through shared memory for speed and to + * avoid MMCONFIG problems. + */ + err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®); + if (err) { + dev_err(&pdev->dev, "PCI read config failed\n"); + goto err_out; + } + + if (~reg == 0) { + dev_err(&pdev->dev, "PCI configuration read error\n"); + goto err_out; + } + err = pci_request_regions(pdev, DRV_NAME); if (err) { dev_err(&pdev->dev, "cannot obtain PCI resources\n"); @@ -4389,21 +4457,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } - /* Get configuration information - * Note: only regular PCI config access once to test for HW issues - * other PCI access through shared memory for speed and to - * avoid MMCONFIG problems. - */ - err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®); - if (err) { - dev_err(&pdev->dev, "PCI read config failed\n"); - goto err_out_free_regions; - } - - /* size of available VPD, only impact sysfs */ - err = pci_vpd_truncate(pdev, 1ul << (((reg & PCI_VPD_ROM_SZ) >> 14) + 8)); - if (err) - dev_warn(&pdev->dev, "Can't set VPD size\n"); #ifdef __BIG_ENDIAN /* The sk98lin vendor driver uses hardware byte swapping but |