summaryrefslogtreecommitdiffstats
path: root/drivers/net/sundance.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sundance.c')
-rw-r--r--drivers/net/sundance.c111
1 files changed, 73 insertions, 38 deletions
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index d500a5771db..0ab9c38b4a3 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -80,7 +80,7 @@
I/O access could affect performance in ARM-based system
- Add Linux software VLAN support
- Version LK1.08 (D-Link):
+ Version LK1.08 (Philippe De Muyter phdm@macqel.be):
- Fix bug of custom mac address
(StationAddr register only accept word write)
@@ -91,11 +91,14 @@
Version LK1.09a (ICPlus):
- Add the delay time in reading the contents of EEPROM
+ Version LK1.10 (Philippe De Muyter phdm@macqel.be):
+ - Make 'unblock interface after Tx underrun' work
+
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.09a"
-#define DRV_RELDATE "10-Jul-2003"
+#define DRV_VERSION "1.01+LK1.10"
+#define DRV_RELDATE "28-Oct-2005"
/* The user-configurable values.
@@ -263,8 +266,10 @@ IV. Notes
IVb. References
The Sundance ST201 datasheet, preliminary version.
-http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
-http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+The Kendin KS8723 datasheet, preliminary version.
+The ICplus IP100 datasheet, preliminary version.
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
IVc. Errata
@@ -500,6 +505,25 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int netdev_close(struct net_device *dev);
static struct ethtool_ops ethtool_ops;
+static void sundance_reset(struct net_device *dev, unsigned long reset_cmd)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base + ASICCtrl;
+ int countdown;
+
+ /* ST201 documentation states ASICCtrl is a 32bit register */
+ iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr);
+ /* ST201 documentation states reset can take up to 1 ms */
+ countdown = 10 + 1;
+ while (ioread32 (ioaddr) & (ResetBusy << 16)) {
+ if (--countdown == 0) {
+ printk(KERN_WARNING "%s : reset not completed !!\n", dev->name);
+ break;
+ }
+ udelay(100);
+ }
+}
+
static int __devinit sundance_probe1 (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -518,6 +542,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
#else
int bar = 1;
#endif
+ int phy, phy_idx = 0;
/* when built into the kernel, we only print version if device is found */
@@ -549,6 +574,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
for (i = 0; i < 3; i++)
((u16 *)dev->dev_addr)[i] =
le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
dev->base_addr = (unsigned long)ioaddr;
dev->irq = irq;
@@ -605,33 +631,31 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
printk("%2.2x:", dev->dev_addr[i]);
printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
- if (1) {
- int phy, phy_idx = 0;
- np->phys[0] = 1; /* Default setting */
- np->mii_preamble_required++;
- for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
- int mii_status = mdio_read(dev, phy, MII_BMSR);
- if (mii_status != 0xffff && mii_status != 0x0000) {
- np->phys[phy_idx++] = phy;
- np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
- if ((mii_status & 0x0040) == 0)
- np->mii_preamble_required++;
- printk(KERN_INFO "%s: MII PHY found at address %d, status "
- "0x%4.4x advertising %4.4x.\n",
- dev->name, phy, mii_status, np->mii_if.advertising);
- }
- }
- np->mii_preamble_required--;
-
- if (phy_idx == 0) {
- printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n",
- dev->name, ioread32(ioaddr + ASICCtrl));
- goto err_out_unregister;
+ np->phys[0] = 1; /* Default setting */
+ np->mii_preamble_required++;
+ for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
+ int mii_status = mdio_read(dev, phy, MII_BMSR);
+ int phyx = phy & 0x1f;
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ np->phys[phy_idx++] = phyx;
+ np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE);
+ if ((mii_status & 0x0040) == 0)
+ np->mii_preamble_required++;
+ printk(KERN_INFO "%s: MII PHY found at address %d, status "
+ "0x%4.4x advertising %4.4x.\n",
+ dev->name, phyx, mii_status, np->mii_if.advertising);
}
+ }
+ np->mii_preamble_required--;
- np->mii_if.phy_id = np->phys[0];
+ if (phy_idx == 0) {
+ printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n",
+ dev->name, ioread32(ioaddr + ASICCtrl));
+ goto err_out_unregister;
}
+ np->mii_if.phy_id = np->phys[0];
+
/* Parse override configuration */
np->an_enable = 1;
if (card_idx < MAX_UNITS) {
@@ -692,7 +716,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
/* Reset the chip to erase previous misconfiguration. */
if (netif_msg_hw(np))
printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl));
- iowrite16(0x007f, ioaddr + ASICCtrl + 2);
+ iowrite16(0x00ff, ioaddr + ASICCtrl + 2);
if (netif_msg_hw(np))
printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl));
@@ -1190,23 +1214,33 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs
("%s: Transmit status is %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x1e) {
+ if (netif_msg_tx_err(np))
+ printk("%s: Transmit error status %4.4x.\n",
+ dev->name, tx_status);
np->stats.tx_errors++;
if (tx_status & 0x10)
np->stats.tx_fifo_errors++;
if (tx_status & 0x08)
np->stats.collisions++;
+ if (tx_status & 0x04)
+ np->stats.tx_fifo_errors++;
if (tx_status & 0x02)
np->stats.tx_window_errors++;
- /* This reset has not been verified!. */
- if (tx_status & 0x10) { /* Reset the Tx. */
- np->stats.tx_fifo_errors++;
- spin_lock(&np->lock);
- reset_tx(dev);
- spin_unlock(&np->lock);
+ /*
+ ** This reset has been verified on
+ ** DFE-580TX boards ! phdm@macqel.be.
+ */
+ if (tx_status & 0x10) { /* TxUnderrun */
+ unsigned short txthreshold;
+
+ txthreshold = ioread16 (ioaddr + TxStartThresh);
+ /* Restart Tx FIFO and transmitter */
+ sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16);
+ iowrite16 (txthreshold, ioaddr + TxStartThresh);
+ /* No need to reset the Tx pointer here */
}
- if (tx_status & 0x1e) /* Restart the Tx. */
- iowrite16 (TxEnable,
- ioaddr + MACCtrl1);
+ /* Restart the Tx. */
+ iowrite16 (TxEnable, ioaddr + MACCtrl1);
}
/* Yup, this is a documentation bug. It cost me *hours*. */
iowrite16 (0, ioaddr + TxStatus);
@@ -1619,6 +1653,7 @@ static struct ethtool_ops ethtool_ops = {
.get_link = get_link,
.get_msglevel = get_msglevel,
.set_msglevel = set_msglevel,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-26 23:47:03 +0000