summaryrefslogtreecommitdiffstats
path: root/drivers/net/tokenring/3c359.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tokenring/3c359.c')
-rw-r--r--drivers/net/tokenring/3c359.c1843
1 files changed, 0 insertions, 1843 deletions
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
deleted file mode 100644
index b15ac81d46f..00000000000
--- a/drivers/net/tokenring/3c359.c
+++ /dev/null
@@ -1,1843 +0,0 @@
-/*
- * 3c359.c (c) 2000 Mike Phillips (mikep@linuxtr.net) All Rights Reserved
- *
- * Linux driver for 3Com 3c359 Tokenlink Velocity XL PCI NIC
- *
- * Base Driver Olympic:
- * Written 1999 Peter De Schrijver & Mike Phillips
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * 7/17/00 - Clean up, version number 0.9.0. Ready to release to the world.
- *
- * 2/16/01 - Port up to kernel 2.4.2 ready for submission into the kernel.
- * 3/05/01 - Last clean up stuff before submission.
- * 2/15/01 - Finally, update to new pci api.
- *
- * To Do:
- */
-
-/*
- * Technical Card Details
- *
- * All access to data is done with 16/8 bit transfers. The transfer
- * method really sucks. You can only read or write one location at a time.
- *
- * Also, the microcode for the card must be uploaded if the card does not have
- * the flashrom on board. This is a 28K bloat in the driver when compiled
- * as a module.
- *
- * Rx is very simple, status into a ring of descriptors, dma data transfer,
- * interrupts to tell us when a packet is received.
- *
- * Tx is a little more interesting. Similar scenario, descriptor and dma data
- * transfers, but we don't have to interrupt the card to tell it another packet
- * is ready for transmission, we are just doing simple memory writes, not io or mmio
- * writes. The card can be set up to simply poll on the next
- * descriptor pointer and when this value is non-zero will automatically download
- * the next packet. The card then interrupts us when the packet is done.
- *
- */
-
-#define XL_DEBUG 0
-
-#include <linux/jiffies.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/in.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/proc_fs.h>
-#include <linux/ptrace.h>
-#include <linux/skbuff.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/trdevice.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#include <linux/firmware.h>
-#include <linux/slab.h>
-
-#include <net/checksum.h>
-
-#include <asm/io.h>
-
-#include "3c359.h"
-
-static char version[] __devinitdata =
-"3c359.c v1.2.0 2/17/01 - Mike Phillips (mikep@linuxtr.net)" ;
-
-#define FW_NAME "3com/3C359.bin"
-MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
-MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver\n") ;
-MODULE_FIRMWARE(FW_NAME);
-
-/* Module parameters */
-
-/* Ring Speed 0,4,16
- * 0 = Autosense
- * 4,16 = Selected speed only, no autosense
- * This allows the card to be the first on the ring
- * and become the active monitor.
- *
- * WARNING: Some hubs will allow you to insert
- * at the wrong speed.
- *
- * The adapter will _not_ fail to open if there are no
- * active monitors on the ring, it will simply open up in
- * its last known ringspeed if no ringspeed is specified.
- */
-
-static int ringspeed[XL_MAX_ADAPTERS] = {0,} ;
-
-module_param_array(ringspeed, int, NULL, 0);
-MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ;
-
-/* Packet buffer size */
-
-static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ;
-
-module_param_array(pkt_buf_sz, int, NULL, 0) ;
-MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ;
-/* Message Level */
-
-static int message_level[XL_MAX_ADAPTERS] = {0,} ;
-
-module_param_array(message_level, int, NULL, 0) ;
-MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ;
-/*
- * This is a real nasty way of doing this, but otherwise you
- * will be stuck with 1555 lines of hex #'s in the code.
- */
-
-static DEFINE_PCI_DEVICE_TABLE(xl_pci_tbl) =
-{
- {PCI_VENDOR_ID_3COM,PCI_DEVICE_ID_3COM_3C359, PCI_ANY_ID, PCI_ANY_ID, },
- { } /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci,xl_pci_tbl) ;
-
-static int xl_init(struct net_device *dev);
-static int xl_open(struct net_device *dev);
-static int xl_open_hw(struct net_device *dev) ;
-static int xl_hw_reset(struct net_device *dev);
-static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev);
-static void xl_dn_comp(struct net_device *dev);
-static int xl_close(struct net_device *dev);
-static void xl_set_rx_mode(struct net_device *dev);
-static irqreturn_t xl_interrupt(int irq, void *dev_id);
-static int xl_set_mac_address(struct net_device *dev, void *addr) ;
-static void xl_arb_cmd(struct net_device *dev);
-static void xl_asb_cmd(struct net_device *dev) ;
-static void xl_srb_cmd(struct net_device *dev, int srb_cmd) ;
-static void xl_wait_misr_flags(struct net_device *dev) ;
-static int xl_change_mtu(struct net_device *dev, int mtu);
-static void xl_srb_bh(struct net_device *dev) ;
-static void xl_asb_bh(struct net_device *dev) ;
-static void xl_reset(struct net_device *dev) ;
-static void xl_freemem(struct net_device *dev) ;
-
-
-/* EEProm Access Functions */
-static u16 xl_ee_read(struct net_device *dev, int ee_addr) ;
-static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value) ;
-
-/* Debugging functions */
-#if XL_DEBUG
-static void print_tx_state(struct net_device *dev) ;
-static void print_rx_state(struct net_device *dev) ;
-
-static void print_tx_state(struct net_device *dev)
-{
-
- struct xl_private *xl_priv = netdev_priv(dev);
- struct xl_tx_desc *txd ;
- u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
- int i ;
-
- printk("tx_ring_head: %d, tx_ring_tail: %d, free_ent: %d\n",xl_priv->tx_ring_head,
- xl_priv->tx_ring_tail, xl_priv->free_ring_entries) ;
- printk("Ring , Address , FSH , DnNextPtr, Buffer, Buffer_Len\n");
- for (i = 0; i < 16; i++) {
- txd = &(xl_priv->xl_tx_ring[i]) ;
- printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(txd),
- txd->framestartheader, txd->dnnextptr, txd->buffer, txd->buffer_length ) ;
- }
-
- printk("DNLISTPTR = %04x\n", readl(xl_mmio + MMIO_DNLISTPTR) );
-
- printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL) );
- printk("Queue status = %0x\n",netif_running(dev) ) ;
-}
-
-static void print_rx_state(struct net_device *dev)
-{
-
- struct xl_private *xl_priv = netdev_priv(dev);
- struct xl_rx_desc *rxd ;
- u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
- int i ;
-
- printk("rx_ring_tail: %d\n", xl_priv->rx_ring_tail);
- printk("Ring , Address , FrameState , UPNextPtr, FragAddr, Frag_Len\n");
- for (i = 0; i < 16; i++) {
- /* rxd = (struct xl_rx_desc *)xl_priv->rx_ring_dma_addr + (i * sizeof(struct xl_rx_desc)) ; */
- rxd = &(xl_priv->xl_rx_ring[i]) ;
- printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(rxd),
- rxd->framestatus, rxd->upnextptr, rxd->upfragaddr, rxd->upfraglen ) ;
- }
-
- printk("UPLISTPTR = %04x\n", readl(xl_mmio + MMIO_UPLISTPTR));
-
- printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL));
- printk("Queue status = %0x\n",netif_running(dev));
-}
-#endif
-
-/*
- * Read values from the on-board EEProm. This looks very strange
- * but you have to wait for the EEProm to get/set the value before
- * passing/getting the next value from the nic. As with all requests
- * on this nic it has to be done in two stages, a) tell the nic which
- * memory address you want to access and b) pass/get the value from the nic.
- * With the EEProm, you have to wait before and between access a) and b).
- * As this is only read at initialization time and the wait period is very
- * small we shouldn't have to worry about scheduling issues.
- */
-
-static u16 xl_ee_read(struct net_device *dev, int ee_addr)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
-
- /* Wait for EEProm to not be busy */
- writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
-
- /* Tell EEProm what we want to do and where */
- writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ;
-
- /* Wait for EEProm to not be busy */
- writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
-
- /* Tell EEProm what we want to do and where */
- writel(IO_WORD_WRITE | EECONTROL , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ;
-
- /* Finally read the value from the EEProm */
- writel(IO_WORD_READ | EEDATA , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- return readw(xl_mmio + MMIO_MACDATA) ;
-}
-
-/*
- * Write values to the onboard eeprom. As with eeprom read you need to
- * set which location to write, wait, value to write, wait, with the
- * added twist of having to enable eeprom writes as well.
- */
-
-static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
-
- /* Wait for EEProm to not be busy */
- writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
-
- /* Enable write/erase */
- writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(EE_ENABLE_WRITE, xl_mmio + MMIO_MACDATA) ;
-
- /* Wait for EEProm to not be busy */
- writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
-
- /* Put the value we want to write into EEDATA */
- writel(IO_WORD_WRITE | EEDATA, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(ee_value, xl_mmio + MMIO_MACDATA) ;
-
- /* Tell EEProm to write eevalue into ee_addr */
- writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(EEWRITE + ee_addr, xl_mmio + MMIO_MACDATA) ;
-
- /* Wait for EEProm to not be busy, to ensure write gets done */
- writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
-
- return ;
-}
-
-static const struct net_device_ops xl_netdev_ops = {
- .ndo_open = xl_open,
- .ndo_stop = xl_close,
- .ndo_start_xmit = xl_xmit,
- .ndo_change_mtu = xl_change_mtu,
- .ndo_set_rx_mode = xl_set_rx_mode,
- .ndo_set_mac_address = xl_set_mac_address,
-};
-
-static int __devinit xl_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *dev ;
- struct xl_private *xl_priv ;
- static int card_no = -1 ;
- int i ;
-
- card_no++ ;
-
- if (pci_enable_device(pdev)) {
- return -ENODEV ;
- }
-
- pci_set_master(pdev);
-
- if ((i = pci_request_regions(pdev,"3c359"))) {
- return i ;
- }
-
- /*
- * Allowing init_trdev to allocate the private data will align
- * xl_private on a 32 bytes boundary which we need for the rx/tx
- * descriptors
- */
-
- dev = alloc_trdev(sizeof(struct xl_private)) ;
- if (!dev) {
- pci_release_regions(pdev) ;
- return -ENOMEM ;
- }
- xl_priv = netdev_priv(dev);
-
-#if XL_DEBUG
- printk("pci_device: %p, dev:%p, dev->priv: %p, ba[0]: %10x, ba[1]:%10x\n",
- pdev, dev, netdev_priv(dev), (unsigned int)pdev->resource[0].start, (unsigned int)pdev->resource[1].start);
-#endif
-
- dev->irq=pdev->irq;
- dev->base_addr=pci_resource_start(pdev,0) ;
- xl_priv->xl_card_name = pci_name(pdev);
- xl_priv->xl_mmio=ioremap(pci_resource_start(pdev,1), XL_IO_SPACE);
- xl_priv->pdev = pdev ;
-
- if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) )
- xl_priv->pkt_buf_sz = PKT_BUF_SZ ;
- else
- xl_priv->pkt_buf_sz = pkt_buf_sz[card_no] ;
-
- dev->mtu = xl_priv->pkt_buf_sz - TR_HLEN ;
- xl_priv->xl_ring_speed = ringspeed[card_no] ;
- xl_priv->xl_message_level = message_level[card_no] ;
- xl_priv->xl_functional_addr[0] = xl_priv->xl_functional_addr[1] = xl_priv->xl_functional_addr[2] = xl_priv->xl_functional_addr[3] = 0 ;
- xl_priv->xl_copy_all_options = 0 ;
-
- if((i = xl_init(dev))) {
- iounmap(xl_priv->xl_mmio) ;
- free_netdev(dev) ;
- pci_release_regions(pdev) ;
- return i ;
- }
-
- dev->netdev_ops = &xl_netdev_ops;
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- pci_set_drvdata(pdev,dev) ;
- if ((i = register_netdev(dev))) {
- printk(KERN_ERR "3C359, register netdev failed\n") ;
- pci_set_drvdata(pdev,NULL) ;
- iounmap(xl_priv->xl_mmio) ;
- free_netdev(dev) ;
- pci_release_regions(pdev) ;
- return i ;
- }
-
- printk(KERN_INFO "3C359: %s registered as: %s\n",xl_priv->xl_card_name,dev->name) ;
-
- return 0;
-}
-
-static int xl_init_firmware(struct xl_private *xl_priv)
-{
- int err;
-
- err = request_firmware(&xl_priv->fw, FW_NAME, &xl_priv->pdev->dev);
- if (err) {
- printk(KERN_ERR "Failed to load firmware \"%s\"\n", FW_NAME);
- return err;
- }
-
- if (xl_priv->fw->size < 16) {
- printk(KERN_ERR "Bogus length %zu in \"%s\"\n",
- xl_priv->fw->size, FW_NAME);
- release_firmware(xl_priv->fw);
- err = -EINVAL;
- }
-
- return err;
-}
-
-static int __devinit xl_init(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- int err;
-
- printk(KERN_INFO "%s\n", version);
- printk(KERN_INFO "%s: I/O at %hx, MMIO at %p, using irq %d\n",
- xl_priv->xl_card_name, (unsigned int)dev->base_addr ,xl_priv->xl_mmio, dev->irq);
-
- spin_lock_init(&xl_priv->xl_lock) ;
-
- err = xl_init_firmware(xl_priv);
- if (err == 0)
- err = xl_hw_reset(dev);
-
- return err;
-}
-
-
-/*
- * Hardware reset. This needs to be a separate entity as we need to reset the card
- * when we change the EEProm settings.
- */
-
-static int xl_hw_reset(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
- unsigned long t ;
- u16 i ;
- u16 result_16 ;
- u8 result_8 ;
- u16 start ;
- int j ;
-
- if (xl_priv->fw == NULL)
- return -EINVAL;
-
- /*
- * Reset the card. If the card has got the microcode on board, we have
- * missed the initialization interrupt, so we must always do this.
- */
-
- writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
-
- /*
- * Must wait for cmdInProgress bit (12) to clear before continuing with
- * card configuration.
- */
-
- t=jiffies;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- schedule();
- if (time_after(jiffies, t + 40 * HZ)) {
- printk(KERN_ERR "%s: 3COM 3C359 Velocity XL card not responding to global reset.\n", dev->name);
- return -ENODEV;
- }
- }
-
- /*
- * Enable pmbar by setting bit in CPAttention
- */
-
- writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- result_8 = readb(xl_mmio + MMIO_MACDATA) ;
- result_8 = result_8 | CPA_PMBARVIS ;
- writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(result_8, xl_mmio + MMIO_MACDATA) ;
-
- /*
- * Read cpHold bit in pmbar, if cleared we have got Flashrom on board.
- * If not, we need to upload the microcode to the card
- */
-
- writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
-
-#if XL_DEBUG
- printk(KERN_INFO "Read from PMBAR = %04x\n", readw(xl_mmio + MMIO_MACDATA));
-#endif
-
- if ( readw( (xl_mmio + MMIO_MACDATA)) & PMB_CPHOLD ) {
-
- /* Set PmBar, privateMemoryBase bits (8:2) to 0 */
-
- writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
- result_16 = readw(xl_mmio + MMIO_MACDATA) ;
- result_16 = result_16 & ~((0x7F) << 2) ;
- writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(result_16,xl_mmio + MMIO_MACDATA) ;
-
- /* Set CPAttention, memWrEn bit */
-
- writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- result_8 = readb(xl_mmio + MMIO_MACDATA) ;
- result_8 = result_8 | CPA_MEMWREN ;
- writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(result_8, xl_mmio + MMIO_MACDATA) ;
-
- /*
- * Now to write the microcode into the shared ram
- * The microcode must finish at position 0xFFFF,
- * so we must subtract to get the start position for the code
- *
- * Looks strange but ensures compiler only uses
- * 16 bit unsigned int
- */
- start = (0xFFFF - (xl_priv->fw->size) + 1) ;
-
- printk(KERN_INFO "3C359: Uploading Microcode: ");
-
- for (i = start, j = 0; j < xl_priv->fw->size; i++, j++) {
- writel(MEM_BYTE_WRITE | 0XD0000 | i,
- xl_mmio + MMIO_MAC_ACCESS_CMD);
- writeb(xl_priv->fw->data[j], xl_mmio + MMIO_MACDATA);
- if (j % 1024 == 0)
- printk(".");
- }
- printk("\n") ;
-
- for (i = 0; i < 16; i++) {
- writel((MEM_BYTE_WRITE | 0xDFFF0) + i,
- xl_mmio + MMIO_MAC_ACCESS_CMD);
- writeb(xl_priv->fw->data[xl_priv->fw->size - 16 + i],
- xl_mmio + MMIO_MACDATA);
- }
-
- /*
- * Have to write the start address of the upload to FFF4, but
- * the address must be >> 4. You do not want to know how long
- * it took me to discover this.
- */
-
- writel(MEM_WORD_WRITE | 0xDFFF4, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(start >> 4, xl_mmio + MMIO_MACDATA);
-
- /* Clear the CPAttention, memWrEn Bit */
-
- writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- result_8 = readb(xl_mmio + MMIO_MACDATA) ;
- result_8 = result_8 & ~CPA_MEMWREN ;
- writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(result_8, xl_mmio + MMIO_MACDATA) ;
-
- /* Clear the cpHold bit in pmbar */
-
- writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
- result_16 = readw(xl_mmio + MMIO_MACDATA) ;
- result_16 = result_16 & ~PMB_CPHOLD ;
- writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(result_16,xl_mmio + MMIO_MACDATA) ;
-
-
- } /* If microcode upload required */
-
- /*
- * The card should now go though a self test procedure and get itself ready
- * to be opened, we must wait for an srb response with the initialization
- * information.
- */
-
-#if XL_DEBUG
- printk(KERN_INFO "%s: Microcode uploaded, must wait for the self test to complete\n", dev->name);
-#endif
-
- writew(SETINDENABLE | 0xFFF, xl_mmio + MMIO_COMMAND) ;
-
- t=jiffies;
- while ( !(readw(xl_mmio + MMIO_INTSTATUS_AUTO) & INTSTAT_SRB) ) {
- schedule();
- if (time_after(jiffies, t + 15 * HZ)) {
- printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
- return -ENODEV;
- }
- }
-
- /*
- * Write the RxBufArea with D000, RxEarlyThresh, TxStartThresh,
- * DnPriReqThresh, read the tech docs if you want to know what
- * values they need to be.
- */
-
- writel(MMIO_WORD_WRITE | RXBUFAREA, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(0xD000, xl_mmio + MMIO_MACDATA) ;
-
- writel(MMIO_WORD_WRITE | RXEARLYTHRESH, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(0X0020, xl_mmio + MMIO_MACDATA) ;
-
- writew( SETTXSTARTTHRESH | 0x40 , xl_mmio + MMIO_COMMAND) ;
-
- writeb(0x04, xl_mmio + MMIO_DNBURSTTHRESH) ;
- writeb(0x04, xl_mmio + DNPRIREQTHRESH) ;
-
- /*
- * Read WRBR to provide the location of the srb block, have to use byte reads not word reads.
- * Tech docs have this wrong !!!!
- */
-
- writel(MMIO_BYTE_READ | WRBR, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- xl_priv->srb = readb(xl_mmio + MMIO_MACDATA) << 8 ;
- writel( (MMIO_BYTE_READ | WRBR) + 1, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- xl_priv->srb = xl_priv->srb | readb(xl_mmio + MMIO_MACDATA) ;
-
-#if XL_DEBUG
- writel(IO_WORD_READ | SWITCHSETTINGS, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- if ( readw(xl_mmio + MMIO_MACDATA) & 2) {
- printk(KERN_INFO "Default ring speed 4 mbps\n");
- } else {
- printk(KERN_INFO "Default ring speed 16 mbps\n");
- }
- printk(KERN_INFO "%s: xl_priv->srb = %04x\n",xl_priv->xl_card_name, xl_priv->srb);
-#endif
-
- return 0;
-}
-
-static int xl_open(struct net_device *dev)
-{
- struct xl_private *xl_priv=netdev_priv(dev);
- u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
- u8 i ;
- __le16 hwaddr[3] ; /* Should be u8[6] but we get word return values */
- int open_err ;
-
- u16 switchsettings, switchsettings_eeprom ;
-
- if (request_irq(dev->irq, xl_interrupt, IRQF_SHARED , "3c359", dev))
- return -EAGAIN;
-
- /*
- * Read the information from the EEPROM that we need.
- */
-
- hwaddr[0] = cpu_to_le16(xl_ee_read(dev,0x10));
- hwaddr[1] = cpu_to_le16(xl_ee_read(dev,0x11));
- hwaddr[2] = cpu_to_le16(xl_ee_read(dev,0x12));
-
- /* Ring speed */
-
- switchsettings_eeprom = xl_ee_read(dev,0x08) ;
- switchsettings = switchsettings_eeprom ;
-
- if (xl_priv->xl_ring_speed != 0) {
- if (xl_priv->xl_ring_speed == 4)
- switchsettings = switchsettings | 0x02 ;
- else
- switchsettings = switchsettings & ~0x02 ;
- }
-
- /* Only write EEProm if there has been a change */
- if (switchsettings != switchsettings_eeprom) {
- xl_ee_write(dev,0x08,switchsettings) ;
- /* Hardware reset after changing EEProm */
- xl_hw_reset(dev) ;
- }
-
- memcpy(dev->dev_addr,hwaddr,dev->addr_len) ;
-
- open_err = xl_open_hw(dev) ;
-
- /*
- * This really needs to be cleaned up with better error reporting.
- */
-
- if (open_err != 0) { /* Something went wrong with the open command */
- if (open_err & 0x07) { /* Wrong speed, retry at different speed */
- printk(KERN_WARNING "%s: Open Error, retrying at different ringspeed\n", dev->name);
- switchsettings = switchsettings ^ 2 ;
- xl_ee_write(dev,0x08,switchsettings) ;
- xl_hw_reset(dev) ;
- open_err = xl_open_hw(dev) ;
- if (open_err != 0) {
- printk(KERN_WARNING "%s: Open error returned a second time, we're bombing out now\n", dev->name);
- free_irq(dev->irq,dev) ;
- return -ENODEV ;
- }
- } else {
- printk(KERN_WARNING "%s: Open Error = %04x\n", dev->name, open_err) ;
- free_irq(dev->irq,dev) ;
- return -ENODEV ;
- }
- }
-
- /*
- * Now to set up the Rx and Tx buffer structures
- */
- /* These MUST be on 8 byte boundaries */
- xl_priv->xl_tx_ring = kzalloc((sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE) + 7, GFP_DMA | GFP_KERNEL);
- if (xl_priv->xl_tx_ring == NULL) {
- free_irq(dev->irq,dev);
- return -ENOMEM;
- }
- xl_priv->xl_rx_ring = kzalloc((sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE) +7, GFP_DMA | GFP_KERNEL);
- if (xl_priv->xl_rx_ring == NULL) {
- free_irq(dev->irq,dev);
- kfree(xl_priv->xl_tx_ring);
- return -ENOMEM;
- }
-
- /* Setup Rx Ring */
- for (i=0 ; i < XL_RX_RING_SIZE ; i++) {
- struct sk_buff *skb ;
-
- skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ;
- if (skb==NULL)
- break ;
-
- skb->dev = dev ;
- xl_priv->xl_rx_ring[i].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE));
- xl_priv->xl_rx_ring[i].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG;
- xl_priv->rx_ring_skb[i] = skb ;
- }
-
- if (i==0) {
- printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name);
- free_irq(dev->irq,dev) ;
- kfree(xl_priv->xl_tx_ring);
- kfree(xl_priv->xl_rx_ring);
- return -EIO ;
- }
-
- xl_priv->rx_ring_no = i ;
- xl_priv->rx_ring_tail = 0 ;
- xl_priv->rx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_rx_ring, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_TODEVICE) ;
- for (i=0;i<(xl_priv->rx_ring_no-1);i++) {
- xl_priv->xl_rx_ring[i].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * (i+1)));
- }
- xl_priv->xl_rx_ring[i].upnextptr = 0 ;
-
- writel(xl_priv->rx_ring_dma_addr, xl_mmio + MMIO_UPLISTPTR) ;
-
- /* Setup Tx Ring */
-
- xl_priv->tx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_tx_ring, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE,PCI_DMA_TODEVICE) ;
-
- xl_priv->tx_ring_head = 1 ;
- xl_priv->tx_ring_tail = 255 ; /* Special marker for first packet */
- xl_priv->free_ring_entries = XL_TX_RING_SIZE ;
-
- /*
- * Setup the first dummy DPD entry for polling to start working.
- */
-
- xl_priv->xl_tx_ring[0].framestartheader = TXDPDEMPTY;
- xl_priv->xl_tx_ring[0].buffer = 0 ;
- xl_priv->xl_tx_ring[0].buffer_length = 0 ;
- xl_priv->xl_tx_ring[0].dnnextptr = 0 ;
-
- writel(xl_priv->tx_ring_dma_addr, xl_mmio + MMIO_DNLISTPTR) ;
- writel(DNUNSTALL, xl_mmio + MMIO_COMMAND) ;
- writel(UPUNSTALL, xl_mmio + MMIO_COMMAND) ;
- writel(DNENABLE, xl_mmio + MMIO_COMMAND) ;
- writeb(0x40, xl_mmio + MMIO_DNPOLL) ;
-
- /*
- * Enable interrupts on the card
- */
-
- writel(SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
- writel(SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
-
- netif_start_queue(dev) ;
- return 0;
-
-}
-
-static int xl_open_hw(struct net_device *dev)
-{
- struct xl_private *xl_priv=netdev_priv(dev);
- u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
- u16 vsoff ;
- char ver_str[33];
- int open_err ;
- int i ;
- unsigned long t ;
-
- /*
- * Okay, let's build up the Open.NIC srb command
- *
- */
-
- writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(OPEN_NIC, xl_mmio + MMIO_MACDATA) ;
-
- /*
- * Use this as a test byte, if it comes back with the same value, the command didn't work
- */
-
- writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb)+ 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(0xff,xl_mmio + MMIO_MACDATA) ;
-
- /* Open options */
- writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(0x00, xl_mmio + MMIO_MACDATA) ;
- writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 9, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(0x00, xl_mmio + MMIO_MACDATA) ;
-
- /*
- * Node address, be careful here, the docs say you can just put zeros here and it will use
- * the hardware address, it doesn't, you must include the node address in the open command.
- */
-
- if (xl_priv->xl_laa[0]) { /* If using a LAA address */
- for (i=10;i<16;i++) {
- writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(xl_priv->xl_laa[i-10],xl_mmio + MMIO_MACDATA) ;
- }
- memcpy(dev->dev_addr,xl_priv->xl_laa,dev->addr_len) ;
- } else { /* Regular hardware address */
- for (i=10;i<16;i++) {
- writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(dev->dev_addr[i-10], xl_mmio + MMIO_MACDATA) ;
- }
- }
-
- /* Default everything else to 0 */
- for (i = 16; i < 34; i++) {
- writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(0x00,xl_mmio + MMIO_MACDATA) ;
- }
-
- /*
- * Set the csrb bit in the MISR register
- */
-
- xl_wait_misr_flags(dev) ;
- writel(MEM_BYTE_WRITE | MF_CSRB, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(0xFF, xl_mmio + MMIO_MACDATA) ;
- writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(MISR_CSRB , xl_mmio + MMIO_MACDATA) ;
-
- /*
- * Now wait for the command to run
- */
-
- t=jiffies;
- while (! (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
- schedule();
- if (time_after(jiffies, t + 40 * HZ)) {
- printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
- break ;
- }
- }
-
- /*
- * Let's interpret the open response
- */
-
- writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb)+2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- if (readb(xl_mmio + MMIO_MACDATA)!=0) {
- open_err = readb(xl_mmio + MMIO_MACDATA) << 8 ;
- writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb) + 7, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- open_err |= readb(xl_mmio + MMIO_MACDATA) ;
- return open_err ;
- } else {
- writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- xl_priv->asb = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
- printk(KERN_INFO "%s: Adapter Opened Details: ",dev->name) ;
- printk("ASB: %04x",xl_priv->asb ) ;
- writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 10, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- printk(", SRB: %04x",swab16(readw(xl_mmio + MMIO_MACDATA)) ) ;
-
- writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 12, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- xl_priv->arb = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
- printk(", ARB: %04x\n",xl_priv->arb );
- writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 14, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- vsoff = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
-
- /*
- * Interesting, sending the individual characters directly to printk was causing klogd to use
- * use 100% of processor time, so we build up the string and print that instead.
- */
-
- for (i=0;i<0x20;i++) {
- writel( (MEM_BYTE_READ | 0xD0000 | vsoff) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- ver_str[i] = readb(xl_mmio + MMIO_MACDATA) ;
- }
- ver_str[i] = '\0' ;
- printk(KERN_INFO "%s: Microcode version String: %s\n",dev->name,ver_str);
- }
-
- /*
- * Issue the AckInterrupt
- */
- writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
-
- return 0 ;
-}
-
-/*
- * There are two ways of implementing rx on the 359 NIC, either
- * interrupt driven or polling. We are going to uses interrupts,
- * it is the easier way of doing things.
- *
- * The Rx works with a ring of Rx descriptors. At initialise time the ring
- * entries point to the next entry except for the last entry in the ring
- * which points to 0. The card is programmed with the location of the first
- * available descriptor and keeps reading the next_ptr until next_ptr is set
- * to 0. Hopefully with a ring size of 16 the card will never get to read a next_ptr
- * of 0. As the Rx interrupt is received we copy the frame up to the protocol layers
- * and then point the end of the ring to our current position and point our current
- * position to 0, therefore making the current position the last position on the ring.
- * The last position on the ring therefore loops continually loops around the rx ring.
- *
- * rx_ring_tail is the position on the ring to process next. (Think of a snake, the head
- * expands as the card adds new packets and we go around eating the tail processing the
- * packets.)
- *
- * Undoubtably it could be streamlined and improved upon, but at the moment it works
- * and the fast path through the routine is fine.
- *
- * adv_rx_ring could be inlined to increase performance, but its called a *lot* of times
- * in xl_rx so would increase the size of the function significantly.
- */
-
-static void adv_rx_ring(struct net_device *dev) /* Advance rx_ring, cut down on bloat in xl_rx */
-{
- struct xl_private *xl_priv=netdev_priv(dev);
- int n = xl_priv->rx_ring_tail;
- int prev_ring_loc;
-
- prev_ring_loc = (n + XL_RX_RING_SIZE - 1) & (XL_RX_RING_SIZE - 1);
- xl_priv->xl_rx_ring[prev_ring_loc].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * n));
- xl_priv->xl_rx_ring[n].framestatus = 0;
- xl_priv->xl_rx_ring[n].upnextptr = 0;
- xl_priv->rx_ring_tail++;
- xl_priv->rx_ring_tail &= (XL_RX_RING_SIZE-1);
-}
-
-static void xl_rx(struct net_device *dev)
-{
- struct xl_private *xl_priv=netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
- struct sk_buff *skb, *skb2 ;
- int frame_length = 0, copy_len = 0 ;
- int temp_ring_loc ;
-
- /*
- * Receive the next frame, loop around the ring until all frames
- * have been received.
- */
-
- while (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & (RXUPDCOMPLETE | RXUPDFULL) ) { /* Descriptor to process */
-
- if (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & RXUPDFULL ) { /* UpdFull, Multiple Descriptors used for the frame */
-
- /*
- * This is a pain, you need to go through all the descriptors until the last one
- * for this frame to find the framelength
- */
-
- temp_ring_loc = xl_priv->rx_ring_tail ;
-
- while (xl_priv->xl_rx_ring[temp_ring_loc].framestatus & RXUPDFULL ) {
- temp_ring_loc++ ;
- temp_ring_loc &= (XL_RX_RING_SIZE-1) ;
- }
-
- frame_length = le32_to_cpu(xl_priv->xl_rx_ring[temp_ring_loc].framestatus) & 0x7FFF;
-
- skb = dev_alloc_skb(frame_length) ;
-
- if (skb==NULL) { /* No memory for frame, still need to roll forward the rx ring */
- printk(KERN_WARNING "%s: dev_alloc_skb failed - multi buffer !\n", dev->name) ;
- while (xl_priv->rx_ring_tail != temp_ring_loc)
- adv_rx_ring(dev) ;
-
- adv_rx_ring(dev) ; /* One more time just for luck :) */
- dev->stats.rx_dropped++ ;
-
- writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
- return ;
- }
-
- while (xl_priv->rx_ring_tail != temp_ring_loc) {
- copy_len = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen) & 0x7FFF;
- frame_length -= copy_len ;
- pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
- skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail],
- skb_put(skb, copy_len),
- copy_len);
- pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
- adv_rx_ring(dev) ;
- }
-
- /* Now we have found the last fragment */
- pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
- skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail],
- skb_put(skb,copy_len), frame_length);
-/* memcpy(skb_put(skb,frame_length), bus_to_virt(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), frame_length) ; */
- pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
- adv_rx_ring(dev) ;
- skb->protocol = tr_type_trans(skb,dev) ;
- netif_rx(skb) ;
-
- } else { /* Single Descriptor Used, simply swap buffers over, fast path */
-
- frame_length = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus) & 0x7FFF;
-
- skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ;
-
- if (skb==NULL) { /* Still need to fix the rx ring */
- printk(KERN_WARNING "%s: dev_alloc_skb failed in rx, single buffer\n",dev->name);
- adv_rx_ring(dev) ;
- dev->stats.rx_dropped++ ;
- writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
- return ;
- }
-
- skb2 = xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] ;
- pci_unmap_single(xl_priv->pdev, le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
- skb_put(skb2, frame_length) ;
- skb2->protocol = tr_type_trans(skb2,dev) ;
-
- xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] = skb ;
- xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev,skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE));
- xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG;
- adv_rx_ring(dev) ;
- dev->stats.rx_packets++ ;
- dev->stats.rx_bytes += frame_length ;
-
- netif_rx(skb2) ;
- } /* if multiple buffers */
- } /* while packet to do */
-
- /* Clear the updComplete interrupt */
- writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
- return ;
-}
-
-/*
- * This is ruthless, it doesn't care what state the card is in it will
- * completely reset the adapter.
- */
-
-static void xl_reset(struct net_device *dev)
-{
- struct xl_private *xl_priv=netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
- unsigned long t;
-
- writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
-
- /*
- * Must wait for cmdInProgress bit (12) to clear before continuing with
- * card configuration.
- */
-
- t=jiffies;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- if (time_after(jiffies, t + 40 * HZ)) {
- printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
- break ;
- }
- }
-
-}
-
-static void xl_freemem(struct net_device *dev)
-{
- struct xl_private *xl_priv=netdev_priv(dev);
- int i ;
-
- for (i=0;i<XL_RX_RING_SIZE;i++) {
- dev_kfree_skb_irq(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail]) ;
- pci_unmap_single(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE);
- xl_priv->rx_ring_tail++ ;
- xl_priv->rx_ring_tail &= XL_RX_RING_SIZE-1;
- }
-
- /* unmap ring */
- pci_unmap_single(xl_priv->pdev,xl_priv->rx_ring_dma_addr, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_FROMDEVICE) ;
-
- pci_unmap_single(xl_priv->pdev,xl_priv->tx_ring_dma_addr, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE, PCI_DMA_TODEVICE) ;
-
- kfree(xl_priv->xl_rx_ring) ;
- kfree(xl_priv->xl_tx_ring) ;
-
- return ;
-}
-
-static irqreturn_t xl_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct xl_private *xl_priv =netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
- u16 intstatus, macstatus ;
-
- intstatus = readw(xl_mmio + MMIO_INTSTATUS) ;
-
- if (!(intstatus & 1)) /* We didn't generate the interrupt */
- return IRQ_NONE;
-
- spin_lock(&xl_priv->xl_lock) ;
-
- /*
- * Process the interrupt
- */
- /*
- * Something fishy going on here, we shouldn't get 0001 ints, not fatal though.
- */
- if (intstatus == 0x0001) {
- writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
- printk(KERN_INFO "%s: 00001 int received\n",dev->name);
- } else {
- if (intstatus & (HOSTERRINT | SRBRINT | ARBCINT | UPCOMPINT | DNCOMPINT | HARDERRINT | (1<<8) | TXUNDERRUN | ASBFINT)) {
-
- /*
- * Host Error.
- * It may be possible to recover from this, but usually it means something
- * is seriously fubar, so we just close the adapter.
- */
-
- if (intstatus & HOSTERRINT) {
- printk(KERN_WARNING "%s: Host Error, performing global reset, intstatus = %04x\n",dev->name,intstatus);
- writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
- printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name);
- netif_stop_queue(dev) ;
- xl_freemem(dev) ;
- free_irq(dev->irq,dev);
- xl_reset(dev) ;
- writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
- spin_unlock(&xl_priv->xl_lock) ;
- return IRQ_HANDLED;
- } /* Host Error */
-
- if (intstatus & SRBRINT ) { /* Srbc interrupt */
- writel(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
- if (xl_priv->srb_queued)
- xl_srb_bh(dev) ;
- } /* SRBR Interrupt */
-
- if (intstatus & TXUNDERRUN) { /* Issue DnReset command */
- writel(DNRESET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { /* Wait for command to run */
- /* !!! FIX-ME !!!!
- Must put a timeout check here ! */
- /* Empty Loop */
- }
- printk(KERN_WARNING "%s: TX Underrun received\n",dev->name);
- writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
- } /* TxUnderRun */
-
- if (intstatus & ARBCINT ) { /* Arbc interrupt */
- xl_arb_cmd(dev) ;
- } /* Arbc */
-
- if (intstatus & ASBFINT) {
- if (xl_priv->asb_queued == 1) {
- xl_asb_cmd(dev) ;
- } else if (xl_priv->asb_queued == 2) {
- xl_asb_bh(dev) ;
- } else {
- writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
- }
- } /* Asbf */
-
- if (intstatus & UPCOMPINT ) /* UpComplete */
- xl_rx(dev) ;
-
- if (intstatus & DNCOMPINT ) /* DnComplete */
- xl_dn_comp(dev) ;
-
- if (intstatus & HARDERRINT ) { /* Hardware error */
- writel(MMIO_WORD_READ | MACSTATUS, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- macstatus = readw(xl_mmio + MMIO_MACDATA) ;
- printk(KERN_WARNING "%s: MacStatusError, details: ", dev->name);
- if (macstatus & (1<<14))
- printk(KERN_WARNING "tchk error: Unrecoverable error\n");
- if (macstatus & (1<<3))
- printk(KERN_WARNING "eint error: Internal watchdog timer expired\n");
- if (macstatus & (1<<2))
- printk(KERN_WARNING "aint error: Host tried to perform invalid operation\n");
- printk(KERN_WARNING "Instatus = %02x, macstatus = %02x\n",intstatus,macstatus) ;
- printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name);
- netif_stop_queue(dev) ;
- xl_freemem(dev) ;
- free_irq(dev->irq,dev);
- unregister_netdev(dev) ;
- free_netdev(dev) ;
- xl_reset(dev) ;
- writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
- spin_unlock(&xl_priv->xl_lock) ;
- return IRQ_HANDLED;
- }
- } else {
- printk(KERN_WARNING "%s: Received Unknown interrupt : %04x\n", dev->name, intstatus);
- writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
- }
- }
-
- /* Turn interrupts back on */
-
- writel( SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
- writel( SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
-
- spin_unlock(&xl_priv->xl_lock) ;
- return IRQ_HANDLED;
-}
-
-/*
- * Tx - Polling configuration
- */
-
-static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct xl_private *xl_priv=netdev_priv(dev);
- struct xl_tx_desc *txd ;
- int tx_head, tx_tail, tx_prev ;
- unsigned long flags ;
-
- spin_lock_irqsave(&xl_priv->xl_lock,flags) ;
-
- netif_stop_queue(dev) ;
-
- if (xl_priv->free_ring_entries > 1 ) {
- /*
- * Set up the descriptor for the packet
- */
- tx_head = xl_priv->tx_ring_head ;
- tx_tail = xl_priv->tx_ring_tail ;
-
- txd = &(xl_priv->xl_tx_ring[tx_head]) ;
- txd->dnnextptr = 0 ;
- txd->framestartheader = cpu_to_le32(skb->len) | TXDNINDICATE;
- txd->buffer = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE));
- txd->buffer_length = cpu_to_le32(skb->len) | TXDNFRAGLAST;
- xl_priv->tx_ring_skb[tx_head] = skb ;
- dev->stats.tx_packets++ ;
- dev->stats.tx_bytes += skb->len ;
-
- /*
- * Set the nextptr of the previous descriptor equal to this descriptor, add XL_TX_RING_SIZE -1
- * to ensure no negative numbers in unsigned locations.
- */
-
- tx_prev = (xl_priv->tx_ring_head + XL_TX_RING_SIZE - 1) & (XL_TX_RING_SIZE - 1) ;
-
- xl_priv->tx_ring_head++ ;
- xl_priv->tx_ring_head &= (XL_TX_RING_SIZE - 1) ;
- xl_priv->free_ring_entries-- ;
-
- xl_priv->xl_tx_ring[tx_prev].dnnextptr = cpu_to_le32(xl_priv->tx_ring_dma_addr + (sizeof (struct xl_tx_desc) * tx_head));
-
- /* Sneaky, by doing a read on DnListPtr we can force the card to poll on the DnNextPtr */
- /* readl(xl_mmio + MMIO_DNLISTPTR) ; */
-
- netif_wake_queue(dev) ;
-
- spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ;
-
- return NETDEV_TX_OK;
- } else {
- spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ;
- return NETDEV_TX_BUSY;
- }
-
-}
-
-/*
- * The NIC has told us that a packet has been downloaded onto the card, we must
- * find out which packet it has done, clear the skb and information for the packet
- * then advance around the ring for all transmitted packets
- */
-
-static void xl_dn_comp(struct net_device *dev)
-{
- struct xl_private *xl_priv=netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
- struct xl_tx_desc *txd ;
-
-
- if (xl_priv->tx_ring_tail == 255) {/* First time */
- xl_priv->xl_tx_ring[0].framestartheader = 0 ;
- xl_priv->xl_tx_ring[0].dnnextptr = 0 ;
- xl_priv->tx_ring_tail = 1 ;
- }
-
- while (xl_priv->xl_tx_ring[xl_priv->tx_ring_tail].framestartheader & TXDNCOMPLETE ) {
- txd = &(xl_priv->xl_tx_ring[xl_priv->tx_ring_tail]) ;
- pci_unmap_single(xl_priv->pdev, le32_to_cpu(txd->buffer), xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]->len, PCI_DMA_TODEVICE);
- txd->framestartheader = 0 ;
- txd->buffer = cpu_to_le32(0xdeadbeef);
- txd->buffer_length = 0 ;
- dev_kfree_skb_irq(xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]) ;
- xl_priv->tx_ring_tail++ ;
- xl_priv->tx_ring_tail &= (XL_TX_RING_SIZE - 1) ;
- xl_priv->free_ring_entries++ ;
- }
-
- netif_wake_queue(dev) ;
-
- writel(ACK_INTERRUPT | DNCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
-}
-
-/*
- * Close the adapter properly.
- * This srb reply cannot be handled from interrupt context as we have
- * to free the interrupt from the driver.
- */
-
-static int xl_close(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
- unsigned long t ;
-
- netif_stop_queue(dev) ;
-
- /*
- * Close the adapter, need to stall the rx and tx queues.
- */
-
- writew(DNSTALL, xl_mmio + MMIO_COMMAND) ;
- t=jiffies;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- schedule();
- if (time_after(jiffies, t + 10 * HZ)) {
- printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNSTALL not responding.\n", dev->name);
- break ;
- }
- }
- writew(DNDISABLE, xl_mmio + MMIO_COMMAND) ;
- t=jiffies;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- schedule();
- if (time_after(jiffies, t + 10 * HZ)) {
- printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNDISABLE not responding.\n", dev->name);
- break ;
- }
- }
- writew(UPSTALL, xl_mmio + MMIO_COMMAND) ;
- t=jiffies;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- schedule();
- if (time_after(jiffies, t + 10 * HZ)) {
- printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPSTALL not responding.\n", dev->name);
- break ;
- }
- }
-
- /* Turn off interrupts, we will still get the indication though
- * so we can trap it
- */
-
- writel(SETINTENABLE, xl_mmio + MMIO_COMMAND) ;
-
- xl_srb_cmd(dev,CLOSE_NIC) ;
-
- t=jiffies;
- while (!(readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
- schedule();
- if (time_after(jiffies, t + 10 * HZ)) {
- printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-CLOSENIC not responding.\n", dev->name);
- break ;
- }
- }
- /* Read the srb response from the adapter */
-
- writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD);
- if (readb(xl_mmio + MMIO_MACDATA) != CLOSE_NIC) {
- printk(KERN_INFO "%s: CLOSE_NIC did not get a CLOSE_NIC response\n",dev->name);
- } else {
- writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- if (readb(xl_mmio + MMIO_MACDATA)==0) {
- printk(KERN_INFO "%s: Adapter has been closed\n",dev->name);
- writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
-
- xl_freemem(dev) ;
- free_irq(dev->irq,dev) ;
- } else {
- printk(KERN_INFO "%s: Close nic command returned error code %02x\n",dev->name, readb(xl_mmio + MMIO_MACDATA)) ;
- }
- }
-
- /* Reset the upload and download logic */
-
- writew(UPRESET, xl_mmio + MMIO_COMMAND) ;
- t=jiffies;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- schedule();
- if (time_after(jiffies, t + 10 * HZ)) {
- printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPRESET not responding.\n", dev->name);
- break ;
- }
- }
- writew(DNRESET, xl_mmio + MMIO_COMMAND) ;
- t=jiffies;
- while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
- schedule();
- if (time_after(jiffies, t + 10 * HZ)) {
- printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNRESET not responding.\n", dev->name);
- break ;
- }
- }
- xl_hw_reset(dev) ;
- return 0 ;
-}
-
-static void xl_set_rx_mode(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- struct netdev_hw_addr *ha;
- unsigned char dev_mc_address[4] ;
- u16 options ;
-
- if (dev->flags & IFF_PROMISC)
- options = 0x0004 ;
- else
- options = 0x0000 ;
-
- if (options ^ xl_priv->xl_copy_all_options) { /* Changed, must send command */
- xl_priv->xl_copy_all_options = options ;
- xl_srb_cmd(dev, SET_RECEIVE_MODE) ;
- return ;
- }
-
- dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ;
-
- netdev_for_each_mc_addr(ha, dev) {
- dev_mc_address[0] |= ha->addr[2];
- dev_mc_address[1] |= ha->addr[3];
- dev_mc_address[2] |= ha->addr[4];
- dev_mc_address[3] |= ha->addr[5];
- }
-
- if (memcmp(xl_priv->xl_functional_addr,dev_mc_address,4) != 0) { /* Options have changed, run the command */
- memcpy(xl_priv->xl_functional_addr, dev_mc_address,4) ;
- xl_srb_cmd(dev, SET_FUNC_ADDRESS) ;
- }
- return ;
-}
-
-
-/*
- * We issued an srb command and now we must read
- * the response from the completed command.
- */
-
-static void xl_srb_bh(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
- u8 srb_cmd, ret_code ;
- int i ;
-
- writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- srb_cmd = readb(xl_mmio + MMIO_MACDATA) ;
- writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- ret_code = readb(xl_mmio + MMIO_MACDATA) ;
-
- /* Ret_code is standard across all commands */
-
- switch (ret_code) {
- case 1:
- printk(KERN_INFO "%s: Command: %d - Invalid Command code\n",dev->name,srb_cmd) ;
- break ;
- case 4:
- printk(KERN_INFO "%s: Command: %d - Adapter is closed, must be open for this command\n",dev->name,srb_cmd);
- break ;
-
- case 6:
- printk(KERN_INFO "%s: Command: %d - Options Invalid for command\n",dev->name,srb_cmd);
- break ;
-
- case 0: /* Successful command execution */
- switch (srb_cmd) {
- case READ_LOG: /* Returns 14 bytes of data from the NIC */
- if(xl_priv->xl_message_level)
- printk(KERN_INFO "%s: READ.LOG 14 bytes of data ",dev->name) ;
- /*
- * We still have to read the log even if message_level = 0 and we don't want
- * to see it
- */
- for (i=0;i<14;i++) {
- writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- if(xl_priv->xl_message_level)
- printk("%02x:",readb(xl_mmio + MMIO_MACDATA)) ;
- }
- printk("\n") ;
- break ;
- case SET_FUNC_ADDRESS:
- if(xl_priv->xl_message_level)
- printk(KERN_INFO "%s: Functional Address Set\n",dev->name);
- break ;
- case CLOSE_NIC:
- if(xl_priv->xl_message_level)
- printk(KERN_INFO "%s: Received CLOSE_NIC interrupt in interrupt handler\n",dev->name);
- break ;
- case SET_MULTICAST_MODE:
- if(xl_priv->xl_message_level)
- printk(KERN_INFO "%s: Multicast options successfully changed\n",dev->name) ;
- break ;
- case SET_RECEIVE_MODE:
- if(xl_priv->xl_message_level) {
- if (xl_priv->xl_copy_all_options == 0x0004)
- printk(KERN_INFO "%s: Entering promiscuous mode\n", dev->name);
- else
- printk(KERN_INFO "%s: Entering normal receive mode\n",dev->name);
- }
- break ;
-
- } /* switch */
- break ;
- } /* switch */
- return ;
-}
-
-static int xl_set_mac_address (struct net_device *dev, void *addr)
-{
- struct sockaddr *saddr = addr ;
- struct xl_private *xl_priv = netdev_priv(dev);
-
- if (netif_running(dev)) {
- printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ;
- return -EIO ;
- }
-
- memcpy(xl_priv->xl_laa, saddr->sa_data,dev->addr_len) ;
-
- if (xl_priv->xl_message_level) {
- printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, xl_priv->xl_laa[0],
- xl_priv->xl_laa[1], xl_priv->xl_laa[2],
- xl_priv->xl_laa[3], xl_priv->xl_laa[4],
- xl_priv->xl_laa[5]);
- }
-
- return 0 ;
-}
-
-static void xl_arb_cmd(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
- u8 arb_cmd ;
- u16 lan_status, lan_status_diff ;
-
- writel( ( MEM_BYTE_READ | 0xD0000 | xl_priv->arb), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- arb_cmd = readb(xl_mmio + MMIO_MACDATA) ;
-
- if (arb_cmd == RING_STATUS_CHANGE) { /* Ring.Status.Change */
- writel( ( (MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
-
- printk(KERN_INFO "%s: Ring Status Change: New Status = %04x\n", dev->name, swab16(readw(xl_mmio + MMIO_MACDATA) )) ;
-
- lan_status = swab16(readw(xl_mmio + MMIO_MACDATA));
-
- /* Acknowledge interrupt, this tells nic we are done with the arb */
- writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
-
- lan_status_diff = xl_priv->xl_lan_status ^ lan_status ;
-
- if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) {
- if (lan_status_diff & LSC_LWF)
- printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name);
- if (lan_status_diff & LSC_ARW)
- printk(KERN_WARNING "%s: Auto removal error\n",dev->name);
- if (lan_status_diff & LSC_FPE)
- printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name);
- if (lan_status_diff & LSC_RR)
- printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name);
-
- /* Adapter has been closed by the hardware */
-
- netif_stop_queue(dev);
- xl_freemem(dev) ;
- free_irq(dev->irq,dev);
-
- printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name);
- } /* If serious error */
-
- if (xl_priv->xl_message_level) {
- if (lan_status_diff & LSC_SIG_LOSS)
- printk(KERN_WARNING "%s: No receive signal detected\n", dev->name);
- if (lan_status_diff & LSC_HARD_ERR)
- printk(KERN_INFO "%s: Beaconing\n",dev->name);
- if (lan_status_diff & LSC_SOFT_ERR)
- printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
- if (lan_status_diff & LSC_TRAN_BCN)
- printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name);
- if (lan_status_diff & LSC_SS)
- printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
- if (lan_status_diff & LSC_RING_REC)
- printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
- if (lan_status_diff & LSC_FDX_MODE)
- printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name);
- }
-
- if (lan_status_diff & LSC_CO) {
- if (xl_priv->xl_message_level)
- printk(KERN_INFO "%s: Counter Overflow\n", dev->name);
- /* Issue READ.LOG command */
- xl_srb_cmd(dev, READ_LOG) ;
- }
-
- /* There is no command in the tech docs to issue the read_sr_counters */
- if (lan_status_diff & LSC_SR_CO) {
- if (xl_priv->xl_message_level)
- printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name);
- }
-
- xl_priv->xl_lan_status = lan_status ;
-
- } /* Lan.change.status */
- else if ( arb_cmd == RECEIVE_DATA) { /* Received.Data */
-#if XL_DEBUG
- printk(KERN_INFO "Received.Data\n");
-#endif
- writel( ((MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- xl_priv->mac_buffer = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
-
- /* Now we are going to be really basic here and not do anything
- * with the data at all. The tech docs do not give me enough
- * information to calculate the buffers properly so we're
- * just going to tell the nic that we've dealt with the frame
- * anyway.
- */
-
- /* Acknowledge interrupt, this tells nic we are done with the arb */
- writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
-
- /* Is the ASB free ? */
-
- xl_priv->asb_queued = 0 ;
- writel( ((MEM_BYTE_READ | 0xD0000 | xl_priv->asb) + 2), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- if (readb(xl_mmio + MMIO_MACDATA) != 0xff) {
- xl_priv->asb_queued = 1 ;
-
- xl_wait_misr_flags(dev) ;
-
- writel(MEM_BYTE_WRITE | MF_ASBFR, xl_mmio + MMIO_MAC_ACCESS_CMD);
- writeb(0xff, xl_mmio + MMIO_MACDATA) ;
- writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(MISR_ASBFR, xl_mmio + MMIO_MACDATA) ;
- return ;
- /* Drop out and wait for the bottom half to be run */
- }
-
- xl_asb_cmd(dev) ;
-
- } else {
- printk(KERN_WARNING "%s: Received unknown arb (xl_priv) command: %02x\n",dev->name,arb_cmd);
- }
-
- /* Acknowledge the arb interrupt */
-
- writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
-
- return ;
-}
-
-
-/*
- * There is only one asb command, but we can get called from different
- * places.
- */
-
-static void xl_asb_cmd(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
-
- if (xl_priv->asb_queued == 1)
- writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
-
- writel(MEM_BYTE_WRITE | 0xd0000 | xl_priv->asb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(0x81, xl_mmio + MMIO_MACDATA) ;
-
- writel(MEM_WORD_WRITE | 0xd0000 | xl_priv->asb | 6, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(swab16(xl_priv->mac_buffer), xl_mmio + MMIO_MACDATA) ;
-
- xl_wait_misr_flags(dev) ;
-
- writel(MEM_BYTE_WRITE | MF_RASB, xl_mmio + MMIO_MAC_ACCESS_CMD);
- writeb(0xff, xl_mmio + MMIO_MACDATA) ;
-
- writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(MISR_RASB, xl_mmio + MMIO_MACDATA) ;
-
- xl_priv->asb_queued = 2 ;
-
- return ;
-}
-
-/*
- * This will only get called if there was an error
- * from the asb cmd.
- */
-static void xl_asb_bh(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
- u8 ret_code ;
-
- writel(MMIO_BYTE_READ | 0xd0000 | xl_priv->asb | 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- ret_code = readb(xl_mmio + MMIO_MACDATA) ;
- switch (ret_code) {
- case 0x01:
- printk(KERN_INFO "%s: ASB Command, unrecognized command code\n",dev->name);
- break ;
- case 0x26:
- printk(KERN_INFO "%s: ASB Command, unexpected receive buffer\n", dev->name);
- break ;
- case 0x40:
- printk(KERN_INFO "%s: ASB Command, Invalid Station ID\n", dev->name);
- break ;
- }
- xl_priv->asb_queued = 0 ;
- writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
- return ;
-}
-
-/*
- * Issue srb commands to the nic
- */
-
-static void xl_srb_cmd(struct net_device *dev, int srb_cmd)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
-
- switch (srb_cmd) {
- case READ_LOG:
- writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(READ_LOG, xl_mmio + MMIO_MACDATA) ;
- break;
-
- case CLOSE_NIC:
- writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(CLOSE_NIC, xl_mmio + MMIO_MACDATA) ;
- break ;
-
- case SET_RECEIVE_MODE:
- writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(SET_RECEIVE_MODE, xl_mmio + MMIO_MACDATA) ;
- writel(MEM_WORD_WRITE | 0xD0000 | xl_priv->srb | 4, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(xl_priv->xl_copy_all_options, xl_mmio + MMIO_MACDATA) ;
- break ;
-
- case SET_FUNC_ADDRESS:
- writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(SET_FUNC_ADDRESS, xl_mmio + MMIO_MACDATA) ;
- writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 6 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(xl_priv->xl_functional_addr[0], xl_mmio + MMIO_MACDATA) ;
- writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 7 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(xl_priv->xl_functional_addr[1], xl_mmio + MMIO_MACDATA) ;
- writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 8 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(xl_priv->xl_functional_addr[2], xl_mmio + MMIO_MACDATA) ;
- writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 9 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(xl_priv->xl_functional_addr[3], xl_mmio + MMIO_MACDATA) ;
- break ;
- } /* switch */
-
-
- xl_wait_misr_flags(dev) ;
-
- /* Write 0xff to the CSRB flag */
- writel(MEM_BYTE_WRITE | MF_CSRB , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(0xFF, xl_mmio + MMIO_MACDATA) ;
- /* Set csrb bit in MISR register to process command */
- writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(MISR_CSRB, xl_mmio + MMIO_MACDATA) ;
- xl_priv->srb_queued = 1 ;
-
- return ;
-}
-
-/*
- * This is nasty, to use the MISR command you have to wait for 6 memory locations
- * to be zero. This is the way the driver does on other OS'es so we should be ok with
- * the empty loop.
- */
-
-static void xl_wait_misr_flags(struct net_device *dev)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
-
- int i ;
-
- writel(MMIO_BYTE_READ | MISR_RW, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- if (readb(xl_mmio + MMIO_MACDATA) != 0) { /* Misr not clear */
- for (i=0; i<6; i++) {
- writel(MEM_BYTE_READ | 0xDFFE0 | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- while (readb(xl_mmio + MMIO_MACDATA) != 0) {
- ; /* Empty Loop */
- }
- }
- }
-
- writel(MMIO_BYTE_WRITE | MISR_AND, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writeb(0x80, xl_mmio + MMIO_MACDATA) ;
-
- return ;
-}
-
-/*
- * Change mtu size, this should work the same as olympic
- */
-
-static int xl_change_mtu(struct net_device *dev, int mtu)
-{
- struct xl_private *xl_priv = netdev_priv(dev);
- u16 max_mtu ;
-
- if (xl_priv->xl_ring_speed == 4)
- max_mtu = 4500 ;
- else
- max_mtu = 18000 ;
-
- if (mtu > max_mtu)
- return -EINVAL ;
- if (mtu < 100)
- return -EINVAL ;
-
- dev->mtu = mtu ;
- xl_priv->pkt_buf_sz = mtu + TR_HLEN ;
-
- return 0 ;
-}
-
-static void __devexit xl_remove_one (struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct xl_private *xl_priv=netdev_priv(dev);
-
- release_firmware(xl_priv->fw);
- unregister_netdev(dev);
- iounmap(xl_priv->xl_mmio) ;
- pci_release_regions(pdev) ;
- pci_set_drvdata(pdev,NULL) ;
- free_netdev(dev);
- return ;
-}
-
-static struct pci_driver xl_3c359_driver = {
- .name = "3c359",
- .id_table = xl_pci_tbl,
- .probe = xl_probe,
- .remove = __devexit_p(xl_remove_one),
-};
-
-static int __init xl_pci_init (void)
-{
- return pci_register_driver(&xl_3c359_driver);
-}
-
-
-static void __exit xl_pci_cleanup (void)
-{
- pci_unregister_driver (&xl_3c359_driver);
-}
-
-module_init(xl_pci_init);
-module_exit(xl_pci_cleanup);
-
-MODULE_LICENSE("GPL") ;