diff options
Diffstat (limited to 'drivers/net/tulip/interrupt.c')
-rw-r--r-- | drivers/net/tulip/interrupt.c | 100 |
1 files changed, 53 insertions, 47 deletions
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c index 2e8e8ee893c..1faf7a4d720 100644 --- a/drivers/net/tulip/interrupt.c +++ b/drivers/net/tulip/interrupt.c @@ -125,12 +125,12 @@ int tulip_poll(struct napi_struct *napi, int budget) #endif if (tulip_debug > 4) - printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry, - tp->rx_ring[entry].status); + printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n", + entry, tp->rx_ring[entry].status); do { if (ioread32(tp->base_addr + CSR5) == 0xffffffff) { - printk(KERN_DEBUG " In tulip_poll(), hardware disappeared.\n"); + printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n"); break; } /* Acknowledge current RX interrupt sources. */ @@ -146,7 +146,7 @@ int tulip_poll(struct napi_struct *napi, int budget) break; if (tulip_debug > 5) - printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n", + printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n", dev->name, entry, status); if (++work_done >= budget) @@ -177,15 +177,15 @@ int tulip_poll(struct napi_struct *napi, int budget) /* Ingore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { if (tulip_debug > 1) - printk(KERN_WARNING "%s: Oversized Ethernet frame " - "spanned multiple buffers, status %8.8x!\n", - dev->name, status); + dev_warn(&dev->dev, + "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", + status); tp->stats.rx_length_errors++; } } else { /* There was a fatal error. */ if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n", + printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n", dev->name, status); tp->stats.rx_errors++; /* end of a packet.*/ if (pkt_len > 1518 || @@ -226,12 +226,11 @@ int tulip_poll(struct napi_struct *napi, int budget) #ifndef final_version if (tp->rx_buffers[entry].mapping != le32_to_cpu(tp->rx_ring[entry].buffer1)) { - printk(KERN_ERR "%s: Internal fault: The skbuff addresses " - "do not match in tulip_rx: %08x vs. %08llx %p / %p.\n", - dev->name, - le32_to_cpu(tp->rx_ring[entry].buffer1), - (unsigned long long)tp->rx_buffers[entry].mapping, - skb->head, temp); + dev_err(&dev->dev, + "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n", + le32_to_cpu(tp->rx_ring[entry].buffer1), + (unsigned long long)tp->rx_buffers[entry].mapping, + skb->head, temp); } #endif @@ -365,16 +364,16 @@ static int tulip_rx(struct net_device *dev) int received = 0; if (tulip_debug > 4) - printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry, - tp->rx_ring[entry].status); + printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n", + entry, tp->rx_ring[entry].status); /* If we own the next entry, it is a new packet. Send it up. */ while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) { s32 status = le32_to_cpu(tp->rx_ring[entry].status); short pkt_len; if (tulip_debug > 5) - printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n", - dev->name, entry, status); + printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n", + dev->name, entry, status); if (--rx_work_limit < 0) break; @@ -402,16 +401,16 @@ static int tulip_rx(struct net_device *dev) /* Ingore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { if (tulip_debug > 1) - printk(KERN_WARNING "%s: Oversized Ethernet frame " - "spanned multiple buffers, status %8.8x!\n", - dev->name, status); + dev_warn(&dev->dev, + "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", + status); tp->stats.rx_length_errors++; } } else { /* There was a fatal error. */ if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n", - dev->name, status); + printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n", + dev->name, status); tp->stats.rx_errors++; /* end of a packet.*/ if (pkt_len > 1518 || (status & RxDescRunt)) @@ -450,12 +449,11 @@ static int tulip_rx(struct net_device *dev) #ifndef final_version if (tp->rx_buffers[entry].mapping != le32_to_cpu(tp->rx_ring[entry].buffer1)) { - printk(KERN_ERR "%s: Internal fault: The skbuff addresses " - "do not match in tulip_rx: %08x vs. %Lx %p / %p.\n", - dev->name, - le32_to_cpu(tp->rx_ring[entry].buffer1), - (long long)tp->rx_buffers[entry].mapping, - skb->head, temp); + dev_err(&dev->dev, + "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n", + le32_to_cpu(tp->rx_ring[entry].buffer1), + (long long)tp->rx_buffers[entry].mapping, + skb->head, temp); } #endif @@ -569,7 +567,7 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance) #endif /* CONFIG_TULIP_NAPI */ if (tulip_debug > 4) - printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n", + printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x\n", dev->name, csr5, ioread32(ioaddr + CSR5)); @@ -601,8 +599,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance) /* There was an major error, log it. */ #ifndef final_version if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n", - dev->name, status); + printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n", + dev->name, status); #endif tp->stats.tx_errors++; if (status & 0x4104) tp->stats.tx_aborted_errors++; @@ -631,8 +629,9 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance) #ifndef final_version if (tp->cur_tx - dirty_tx > TX_RING_SIZE) { - printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d.\n", - dev->name, dirty_tx, tp->cur_tx); + dev_err(&dev->dev, + "Out-of-sync dirty pointer, %d vs. %d\n", + dirty_tx, tp->cur_tx); dirty_tx += TX_RING_SIZE; } #endif @@ -643,9 +642,10 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance) tp->dirty_tx = dirty_tx; if (csr5 & TxDied) { if (tulip_debug > 2) - printk(KERN_WARNING "%s: The transmitter stopped." - " CSR5 is %x, CSR6 %x, new CSR6 %x.\n", - dev->name, csr5, ioread32(ioaddr + CSR6), tp->csr6); + dev_warn(&dev->dev, + "The transmitter stopped. CSR5 is %x, CSR6 %x, new CSR6 %x\n", + csr5, ioread32(ioaddr + CSR6), + tp->csr6); tulip_restart_rxtx(tp); } spin_unlock(&tp->lock); @@ -696,8 +696,9 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance) * to the 21142/3 docs that is). * -- rmk */ - printk(KERN_ERR "%s: (%lu) System Error occurred (%d)\n", - dev->name, tp->nir, error); + dev_err(&dev->dev, + "(%lu) System Error occurred (%d)\n", + tp->nir, error); } /* Clear all error sources, included undocumented ones! */ iowrite32(0x0800f7ba, ioaddr + CSR5); @@ -706,16 +707,17 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance) if (csr5 & TimerInt) { if (tulip_debug > 2) - printk(KERN_ERR "%s: Re-enabling interrupts, %8.8x.\n", - dev->name, csr5); + dev_err(&dev->dev, + "Re-enabling interrupts, %08x\n", + csr5); iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); tp->ttimer = 0; oi++; } if (tx > maxtx || rx > maxrx || oi > maxoi) { if (tulip_debug > 1) - printk(KERN_WARNING "%s: Too much work during an interrupt, " - "csr5=0x%8.8x. (%lu) (%d,%d,%d)\n", dev->name, csr5, tp->nir, tx, rx, oi); + dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n", + csr5, tp->nir, tx, rx, oi); /* Acknowledge all interrupt sources. */ iowrite32(0x8001ffff, ioaddr + CSR5); @@ -764,14 +766,18 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance) entry = tp->dirty_rx % RX_RING_SIZE; if (tp->rx_buffers[entry].skb == NULL) { if (tulip_debug > 1) - printk(KERN_WARNING "%s: in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", dev->name, tp->nir, tp->cur_rx, tp->ttimer, rx); + dev_warn(&dev->dev, + "in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", + tp->nir, tp->cur_rx, tp->ttimer, rx); if (tp->chip_id == LC82C168) { iowrite32(0x00, ioaddr + CSR7); mod_timer(&tp->timer, RUN_AT(HZ/50)); } else { if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) { if (tulip_debug > 1) - printk(KERN_WARNING "%s: in rx suspend mode: (%lu) set timer\n", dev->name, tp->nir); + dev_warn(&dev->dev, + "in rx suspend mode: (%lu) set timer\n", + tp->nir); iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt, ioaddr + CSR7); iowrite32(TimerInt, ioaddr + CSR5); @@ -787,8 +793,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance) } if (tulip_debug > 4) - printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#4.4x.\n", - dev->name, ioread32(ioaddr + CSR5)); + printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n", + dev->name, ioread32(ioaddr + CSR5)); return IRQ_HANDLED; } |