summaryrefslogtreecommitdiffstats
path: root/drivers/net/tulip/uli526x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tulip/uli526x.c')
-rw-r--r--drivers/net/tulip/uli526x.c64
1 files changed, 37 insertions, 27 deletions
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index fa019cabc35..0ab05af237e 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -12,6 +12,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "uli526x"
#define DRV_VERSION "0.9.3"
#define DRV_RELDATE "2005-7-29"
@@ -82,9 +84,16 @@
#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
-#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+#define ULI526X_DBUG(dbug_now, msg, value) \
+do { \
+ if (uli526x_debug || (dbug_now)) \
+ pr_err("%s %lx\n", (msg), (long) (value)); \
+} while (0)
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode) \
+ pr_err("Change Speed to %sMhz %s duplex\n", \
+ mode & 1 ? "100" : "10", \
+ mode & 4 ? "full" : "half");
/* CR9 definition: SROM/MII */
@@ -284,7 +293,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ pr_warning("32-bit PCI DMA not available\n");
err = -ENODEV;
goto err_out_free;
}
@@ -295,19 +304,19 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
goto err_out_free;
if (!pci_resource_start(pdev, 0)) {
- printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ pr_err("I/O base is zero\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
- printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ pr_err("Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_request_regions(pdev, DRV_NAME)) {
- printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ pr_err("Failed to request PCI regions\n");
err = -ENODEV;
goto err_out_disable;
}
@@ -382,9 +391,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
if (err)
goto err_out_res;
- printk(KERN_INFO "%s: ULi M%04lx at pci%s, %pM, irq %d.\n",
- dev->name,ent->driver_data >> 16,pci_name(pdev),
- dev->dev_addr, dev->irq);
+ dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
+ ent->driver_data >> 16, pci_name(pdev),
+ dev->dev_addr, dev->irq);
pci_set_master(pdev);
@@ -516,7 +525,7 @@ static void uli526x_init(struct net_device *dev)
}
}
if(phy_tmp == 32)
- printk(KERN_WARNING "Can not find the phy address!!!");
+ pr_warning("Can not find the phy address!!!");
/* Parser SROM and media mode */
db->media_mode = uli526x_media_mode;
@@ -548,7 +557,7 @@ static void uli526x_init(struct net_device *dev)
update_cr6(db->cr6_data, ioaddr);
/* Send setup frame */
- send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
+ send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */
/* Init CR7, interrupt active bit */
db->cr7_data = CR7_DEFAULT;
@@ -582,7 +591,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
- printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+ pr_err("big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -592,7 +601,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
/* No Tx resource check, it never happen nromally */
if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
- printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
+ pr_err("No Tx resource %ld\n", db->tx_packet_cnt);
return NETDEV_TX_BUSY;
}
@@ -897,16 +906,18 @@ static void uli526x_set_filter_mode(struct net_device * dev)
return;
}
- if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
- ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
+ if (dev->flags & IFF_ALLMULTI ||
+ netdev_mc_count(dev) > ULI5261_MAX_MULTICAST) {
+ ULI526X_DBUG(0, "Pass all multicast address",
+ netdev_mc_count(dev));
db->cr6_data &= ~(CR6_PM | CR6_PBF);
db->cr6_data |= CR6_PAM;
spin_unlock_irqrestore(&db->lock, flags);
return;
}
- ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
- send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
+ ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev));
+ send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */
spin_unlock_irqrestore(&db->lock, flags);
}
@@ -1058,7 +1069,7 @@ static void uli526x_timer(unsigned long data)
/* Link Failed */
ULI526X_DBUG(0, "Link Failed", tmp_cr12);
netif_carrier_off(dev);
- printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ pr_info("%s NIC Link is Down\n",dev->name);
db->link_failed = 1;
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
@@ -1090,11 +1101,11 @@ static void uli526x_timer(unsigned long data)
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
- printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
+ pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
}
else
{
- printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
+ pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
}
netif_carrier_on(dev);
}
@@ -1104,7 +1115,7 @@ static void uli526x_timer(unsigned long data)
{
if(db->init==1)
{
- printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ pr_info("%s NIC Link is Down\n",dev->name);
netif_carrier_off(dev);
}
}
@@ -1230,8 +1241,7 @@ static int uli526x_resume(struct pci_dev *pdev)
err = pci_set_power_state(pdev, PCI_D0);
if (err) {
- printk(KERN_WARNING "%s: Could not put device into D0\n",
- dev->name);
+ dev_warn(&dev->dev, "Could not put device into D0\n");
return err;
}
@@ -1405,14 +1415,14 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
*suptr++ = 0xffff << FLT_SHIFT;
/* fit the multicast address */
- for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ netdev_for_each_mc_addr(mcptr, dev) {
addrptr = (u16 *) mcptr->dmi_addr;
*suptr++ = addrptr[0] << FLT_SHIFT;
*suptr++ = addrptr[1] << FLT_SHIFT;
*suptr++ = addrptr[2] << FLT_SHIFT;
}
- for (; i<14; i++) {
+ for (i = netdev_mc_count(dev); i < 14; i++) {
*suptr++ = 0xffff << FLT_SHIFT;
*suptr++ = 0xffff << FLT_SHIFT;
*suptr++ = 0xffff << FLT_SHIFT;
@@ -1432,7 +1442,7 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
update_cr6(db->cr6_data, dev->base_addr);
dev->trans_start = jiffies;
} else
- printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
+ pr_err("No Tx resource - Send_filter_frame!\n");
}
@@ -1783,7 +1793,7 @@ static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
}
-static struct pci_device_id uli526x_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(uli526x_pci_tbl) = {
{ 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
{ 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
{ 0, }