diff options
Diffstat (limited to 'drivers/net/tulip/winbond-840.c')
| -rw-r--r-- | drivers/net/tulip/winbond-840.c | 1716 |
1 files changed, 1716 insertions, 0 deletions
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c new file mode 100644 index 00000000000..f7e64ee11b1 --- /dev/null +++ b/drivers/net/tulip/winbond-840.c @@ -0,0 +1,1716 @@ +/* winbond-840.c: A Linux PCI network adapter device driver. */ +/* + Written 1998-2001 by Donald Becker. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Support and updates available at + http://www.scyld.com/network/drivers.html + + Do not remove the copyright information. + Do not change the version information unless an improvement has been made. + Merely removing my name, as Compex has done in the past, does not count + as an improvement. + + Changelog: + * ported to 2.4 + ??? + * spin lock update, memory barriers, new style dma mappings + limit each tx buffer to < 1024 bytes + remove DescIntr from Rx descriptors (that's an Tx flag) + remove next pointer from Tx descriptors + synchronize tx_q_bytes + software reset in tx_timeout + Copyright (C) 2000 Manfred Spraul + * further cleanups + power management. + support for big endian descriptors + Copyright (C) 2001 Manfred Spraul + * ethtool support (jgarzik) + * Replace some MII-related magic numbers with constants (jgarzik) + + TODO: + * enable pci_power_off + * Wake-On-LAN +*/ + +#define DRV_NAME "winbond-840" +#define DRV_VERSION "1.01-d" +#define DRV_RELDATE "Nov-17-2001" + + +/* Automatically extracted configuration info: +probe-func: winbond840_probe +config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840 + +c-help-name: Winbond W89c840 PCI Ethernet support +c-help-symbol: CONFIG_WINBOND_840 +c-help: This driver is for the Winbond W89c840 chip. It also works with +c-help: the TX9882 chip on the Compex RL100-ATX board. +c-help: More specific information and updates are available from +c-help: http://www.scyld.com/network/drivers.html +*/ + +/* The user-configurable values. + These may be modified when a driver module is loaded.*/ + +static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ +static int max_interrupt_work = 20; +/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + The '840 uses a 64 element hash table based on the Ethernet CRC. */ +static int multicast_filter_limit = 32; + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1518 effectively disables this feature. */ +static int rx_copybreak; + +/* Used to pass the media type, etc. + Both 'options[]' and 'full_duplex[]' should exist for driver + interoperability. + The media type is usually passed in 'options[]'. +*/ +#define MAX_UNITS 8 /* More are supported, limit only on options */ +static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; +static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + The compiler will convert <unsigned>'%'<2^N> into a bit mask. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + There are no ill effects from too-large receive rings. */ +#define TX_RING_SIZE 16 +#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#define TX_QUEUE_LEN_RESTART 5 +#define RX_RING_SIZE 32 + +#define TX_BUFLIMIT (1024-128) + +/* The presumed FIFO size for working around the Tx-FIFO-overflow bug. + To avoid overflowing we don't queue again until we have room for a + full-size packet. + */ +#define TX_FIFO_SIZE (2048) +#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16) + + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2*HZ) + +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ + +/* Include files, designed to support most kernel versions 2.0.0 and later. */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/rtnetlink.h> +#include <linux/crc32.h> +#include <linux/bitops.h> +#include <asm/uaccess.h> +#include <asm/processor.h> /* Processor type for cache alignment. */ +#include <asm/io.h> +#include <asm/irq.h> + +/* These identify the driver base version and may not be removed. */ +static char version[] __devinitdata = +KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n" +KERN_INFO " http://www.scyld.com/network/drivers.html\n"; + +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_param(max_interrupt_work, int, 0); +module_param(debug, int, 0); +module_param(rx_copybreak, int, 0); +module_param(multicast_filter_limit, int, 0); +module_param_array(options, int, NULL, 0); +module_param_array(full_duplex, int, NULL, 0); +MODULE_PARM_DESC(max_interrupt_work, "winbond-840 maximum events handled per interrupt"); +MODULE_PARM_DESC(debug, "winbond-840 debug level (0-6)"); +MODULE_PARM_DESC(rx_copybreak, "winbond-840 copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(multicast_filter_limit, "winbond-840 maximum number of filtered multicast addresses"); +MODULE_PARM_DESC(options, "winbond-840: Bits 0-3: media type, bit 17: full duplex"); +MODULE_PARM_DESC(full_duplex, "winbond-840 full duplex setting(s) (1)"); + +/* + Theory of Operation + +I. Board Compatibility + +This driver is for the Winbond w89c840 chip. + +II. Board-specific settings + +None. + +III. Driver operation + +This chip is very similar to the Digital 21*4* "Tulip" family. The first +twelve registers and the descriptor format are nearly identical. Read a +Tulip manual for operational details. + +A significant difference is that the multicast filter and station address are +stored in registers rather than loaded through a pseudo-transmit packet. + +Unlike the Tulip, transmit buffers are limited to 1KB. To transmit a +full-sized packet we must use both data buffers in a descriptor. Thus the +driver uses ring mode where descriptors are implicitly sequential in memory, +rather than using the second descriptor address as a chain pointer to +subsequent descriptors. + +IV. Notes + +If you are going to almost clone a Tulip, why not go all the way and avoid +the need for a new driver? + +IVb. References + +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html +http://www.winbond.com.tw/ + +IVc. Errata + +A horrible bug exists in the transmit FIFO. Apparently the chip doesn't +correctly detect a full FIFO, and queuing more than 2048 bytes may result in +silent data corruption. + +Test with 'ping -s 10000' on a fast computer. + +*/ + + + +/* + PCI probe table. +*/ +enum pci_id_flags_bits { + /* Set PCI command register bits before calling probe1(). */ + PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, + /* Read and map the single following PCI BAR. */ + PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4, + PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400, +}; +enum chip_capability_flags { + CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,}; +#ifdef USE_IO_OPS +#define W840_FLAGS (PCI_USES_IO | PCI_ADDR0 | PCI_USES_MASTER) +#else +#define W840_FLAGS (PCI_USES_MEM | PCI_ADDR1 | PCI_USES_MASTER) +#endif + +static struct pci_device_id w840_pci_tbl[] = { + { 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 }, + { 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, w840_pci_tbl); + +struct pci_id_info { + const char *name; + struct match_info { + int pci, pci_mask, subsystem, subsystem_mask; + int revision, revision_mask; /* Only 8 bits. */ + } id; + enum pci_id_flags_bits pci_flags; + int io_size; /* Needed for I/O region check or ioremap(). */ + int drv_flags; /* Driver use, intended as capability flags. */ +}; +static struct pci_id_info pci_id_tbl[] = { + {"Winbond W89c840", /* Sometime a Level-One switch card. */ + { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 }, + W840_FLAGS, 128, CanHaveMII | HasBrokenTx | FDXOnNoMII}, + {"Winbond W89c840", { 0x08401050, 0xffffffff, }, + W840_FLAGS, 128, CanHaveMII | HasBrokenTx}, + {"Compex RL100-ATX", { 0x201111F6, 0xffffffff,}, + W840_FLAGS, 128, CanHaveMII | HasBrokenTx}, + {NULL,}, /* 0 terminated list. */ +}; + +/* This driver was written to use PCI memory space, however some x86 systems + work only with I/O space accesses. Pass -DUSE_IO_OPS to use PCI I/O space + accesses instead of memory space. */ + +/* Offsets to the Command and Status Registers, "CSRs". + While similar to the Tulip, these registers are longword aligned. + Note: It's not useful to define symbolic names for every register bit in + the device. The name can only partially document the semantics and make + the driver longer and more difficult to read. +*/ +enum w840_offsets { + PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08, + RxRingPtr=0x0C, TxRingPtr=0x10, + IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C, + RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C, + CurRxDescAddr=0x30, CurRxBufAddr=0x34, /* Debug use */ + MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40, + CurTxDescAddr=0x4C, CurTxBufAddr=0x50, +}; + +/* Bits in the interrupt status/enable registers. */ +/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */ +enum intr_status_bits { + NormalIntr=0x10000, AbnormalIntr=0x8000, + IntrPCIErr=0x2000, TimerInt=0x800, + IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40, + TxFIFOUnderflow=0x20, RxErrIntr=0x10, + TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01, +}; + +/* Bits in the NetworkConfig register. */ +enum rx_mode_bits { + AcceptErr=0x80, AcceptRunt=0x40, + AcceptBroadcast=0x20, AcceptMulticast=0x10, + AcceptAllPhys=0x08, AcceptMyPhys=0x02, +}; + +enum mii_reg_bits { + MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000, + MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000, +}; + +/* The Tulip Rx and Tx buffer descriptors. */ +struct w840_rx_desc { + s32 status; + s32 length; + u32 buffer1; + u32 buffer2; +}; + +struct w840_tx_desc { + s32 status; + s32 length; + u32 buffer1, buffer2; +}; + +/* Bits in network_desc.status */ +enum desc_status_bits { + DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000, + DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000, + DescIntr=0x80000000, +}; + +#define MII_CNT 1 /* winbond only supports one MII */ +struct netdev_private { + struct w840_rx_desc *rx_ring; + dma_addr_t rx_addr[RX_RING_SIZE]; + struct w840_tx_desc *tx_ring; + dma_addr_t tx_addr[TX_RING_SIZE]; + dma_addr_t ring_dma_addr; + /* The addresses of receive-in-place skbuffs. */ + struct sk_buff* rx_skbuff[RX_RING_SIZE]; + /* The saved address of a sent-in-place packet/buffer, for later free(). */ + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + struct net_device_stats stats; + struct timer_list timer; /* Media monitoring timer. */ + /* Frequently used values: keep some adjacent for cache effect. */ + spinlock_t lock; + int chip_id, drv_flags; + struct pci_dev *pci_dev; + int csr6; + struct w840_rx_desc *rx_head_desc; + unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + unsigned int cur_tx, dirty_tx; + unsigned int tx_q_bytes; + unsigned int tx_full; /* The Tx queue is full. */ + /* MII transceiver section. */ + int mii_cnt; /* MII device addresses. */ + unsigned char phys[MII_CNT]; /* MII device addresses, but only the first is used */ + u32 mii; + struct mii_if_info mii_if; + void __iomem *base_addr; +}; + +static int eeprom_read(void __iomem *ioaddr, int location); +static int mdio_read(struct net_device *dev, int phy_id, int location); +static void mdio_write(struct net_device *dev, int phy_id, int location, int value); +static int netdev_open(struct net_device *dev); +static int update_link(struct net_device *dev); +static void netdev_timer(unsigned long data); +static void init_rxtx_rings(struct net_device *dev); +static void free_rxtx_rings(struct netdev_private *np); +static void init_registers(struct net_device *dev); +static void tx_timeout(struct net_device *dev); +static int alloc_ringdesc(struct net_device *dev); +static void free_ringdesc(struct netdev_private *np); +static int start_tx(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs); +static void netdev_error(struct net_device *dev, int intr_status); +static int netdev_rx(struct net_device *dev); +static u32 __set_rx_mode(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static struct net_device_stats *get_stats(struct net_device *dev); +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static struct ethtool_ops netdev_ethtool_ops; +static int netdev_close(struct net_device *dev); + + + +static int __devinit w840_probe1 (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + struct netdev_private *np; + static int find_cnt; + int chip_idx = ent->driver_data; + int irq; + int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; + void __iomem *ioaddr; + int bar = 1; + + i = pci_enable_device(pdev); + if (i) return i; + + pci_set_master(pdev); + + irq = pdev->irq; + + if (pci_set_dma_mask(pdev,0xFFFFffff)) { + printk(KERN_WARNING "Winbond-840: Device %s disabled due to DMA limitations.\n", + pci_name(pdev)); + return -EIO; + } + dev = alloc_etherdev(sizeof(*np)); + if (!dev) + return -ENOMEM; + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_request_regions(pdev, DRV_NAME)) + goto err_out_netdev; +#ifdef USE_IO_OPS + bar = 0; +#endif + ioaddr = pci_iomap(pdev, bar, pci_id_tbl[chip_idx].io_size); + if (!ioaddr) + goto err_out_free_res; + + for (i = 0; i < 3; i++) + ((u16 *)dev->dev_addr)[i] = le16_to_cpu(eeprom_read(ioaddr, i)); + + /* Reset the chip to erase previous misconfiguration. + No hold time required! */ + iowrite32(0x00000001, ioaddr + PCIBusCfg); + + dev->base_addr = (unsigned long)ioaddr; + dev->irq = irq; + + np = netdev_priv(dev); + np->pci_dev = pdev; + np->chip_id = chip_idx; + np->drv_flags = pci_id_tbl[chip_idx].drv_flags; + spin_lock_init(&np->lock); + np->mii_if.dev = dev; + np->mii_if.mdio_read = mdio_read; + np->mii_if.mdio_write = mdio_write; + np->base_addr = ioaddr; + + pci_set_drvdata(pdev, dev); + + if (dev->mem_start) + option = dev->mem_start; + + /* The lower four bits are the media type. */ + if (option > 0) { + if (option & 0x200) + np->mii_if.full_duplex = 1; + if (option & 15) + printk(KERN_INFO "%s: ignoring user supplied media type %d", + dev->name, option & 15); + } + if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0) + np->mii_if.full_duplex = 1; + + if (np->mii_if.full_duplex) + np->mii_if.force_media = 1; + + /* The chip-specific entries in the device structure. */ + dev->open = &netdev_open; + dev->hard_start_xmit = &start_tx; + dev->stop = &netdev_close; + dev->get_stats = &get_stats; + dev->set_multicast_list = &set_rx_mode; + dev->do_ioctl = &netdev_ioctl; + dev->ethtool_ops = &netdev_ethtool_ops; + dev->tx_timeout = &tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + + i = register_netdev(dev); + if (i) + goto err_out_cleardev; + + printk(KERN_INFO "%s: %s at %p, ", + dev->name, pci_id_tbl[chip_idx].name, ioaddr); + for (i = 0; i < 5; i++) + printk("%2.2x:", dev->dev_addr[i]); + printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq); + + if (np->drv_flags & CanHaveMII) { + int phy, phy_idx = 0; + for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { + int mii_status = mdio_read(dev, phy, MII_BMSR); + if (mii_status != 0xffff && mii_status != 0x0000) { + np->phys[phy_idx++] = phy; + np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); + np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+ + mdio_read(dev, phy, MII_PHYSID2); + printk(KERN_INFO "%s: MII PHY %8.8xh found at address %d, status " + "0x%4.4x advertising %4.4x.\n", + dev->name, np->mii, phy, mii_status, np->mii_if.advertising); + } + } + np->mii_cnt = phy_idx; + np->mii_if.phy_id = np->phys[0]; + if (phy_idx == 0) { + printk(KERN_WARNING "%s: MII PHY not found -- this device may " + "not operate correctly.\n", dev->name); + } + } + + find_cnt++; + return 0; + +err_out_cleardev: + pci_set_drvdata(pdev, NULL); + pci_iounmap(pdev, ioaddr); +err_out_free_res: + pci_release_regions(pdev); +err_out_netdev: + free_netdev (dev); + return -ENODEV; +} + + +/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are + often serial bit streams generated by the host processor. + The example below is for the common 93c46 EEPROM, 64 16 bit words. */ + +/* Delay between EEPROM clock transitions. + No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need + a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that + made udelay() unreliable. + The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is + depricated. +*/ +#define eeprom_delay(ee_addr) ioread32(ee_addr) + +enum EEPROM_Ctrl_Bits { + EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805, + EE_ChipSelect=0x801, EE_DataIn=0x08, +}; + +/* The EEPROM commands include the alway-set leading bit. */ +enum EEPROM_Cmds { + EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), +}; + +static int eeprom_read(void __iomem *addr, int location) +{ + int i; + int retval = 0; + void __iomem *ee_addr = addr + EECtrl; + int read_cmd = location | EE_ReadCmd; + iowrite32(EE_ChipSelect, ee_addr); + + /* Shift the read command bits out. */ + for (i = 10; i >= 0; i--) { + short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; + iowrite32(dataval, ee_addr); + eeprom_delay(ee_addr); + iowrite32(dataval | EE_ShiftClk, ee_addr); + eeprom_delay(ee_addr); + } + iowrite32(EE_ChipSelect, ee_addr); + eeprom_delay(ee_addr); + + for (i = 16; i > 0; i--) { + iowrite32(EE_ChipSelect | EE_ShiftClk, ee_addr); + eeprom_delay(ee_addr); + retval = (retval << 1) | ((ioread32(ee_addr) & EE_DataIn) ? 1 : 0); + iowrite32(EE_ChipSelect, ee_addr); + eeprom_delay(ee_addr); + } + + /* Terminate the EEPROM access. */ + iowrite32(0, ee_addr); + return retval; +} + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. See the MII specifications or DP83840A data sheet + for details. + + The maximum data clock rate is 2.5 Mhz. The minimum timing is usually + met by back-to-back 33Mhz PCI cycles. */ +#define mdio_delay(mdio_addr) ioread32(mdio_addr) + +/* Set iff a MII transceiver on any interface requires mdio preamble. + This only set with older transceivers, so the extra + code size of a per-interface flag is not worthwhile. */ +static char mii_preamble_required = 1; + +#define MDIO_WRITE0 (MDIO_EnbOutput) +#define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput) + +/* Generate the preamble required for initial synchronization and + a few older transceivers. */ +static void mdio_sync(void __iomem *mdio_addr) +{ + int bits = 32; + + /* Establish sync by sending at least 32 logic ones. */ + while (--bits >= 0) { + iowrite32(MDIO_WRITE1, mdio_addr); + mdio_delay(mdio_addr); + iowrite32(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } +} + +static int mdio_read(struct net_device *dev, int phy_id, int location) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *mdio_addr = np->base_addr + MIICtrl; + int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; + int i, retval = 0; + + if (mii_preamble_required) + mdio_sync(mdio_addr); + + /* Shift the read command bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + + iowrite32(dataval, mdio_addr); + mdio_delay(mdio_addr); + iowrite32(dataval | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 20; i > 0; i--) { + iowrite32(MDIO_EnbIn, mdio_addr); + mdio_delay(mdio_addr); + retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DataIn) ? 1 : 0); + iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + return (retval>>1) & 0xffff; +} + +static void mdio_write(struct net_device *dev, int phy_id, int location, int value) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *mdio_addr = np->base_addr + MIICtrl; + int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; + int i; + + if (location == 4 && phy_id == np->phys[0]) + np->mii_if.advertising = value; + + if (mii_preamble_required) + mdio_sync(mdio_addr); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + + iowrite32(dataval, mdio_addr); + mdio_delay(mdio_addr); + iowrite32(dataval | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + iowrite32(MDIO_EnbIn, mdio_addr); + mdio_delay(mdio_addr); + iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + return; +} + + +static int netdev_open(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + int i; + + iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */ + + netif_device_detach(dev); + i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev); + if (i) + goto out_err; + + if (debug > 1) + printk(KERN_DEBUG "%s: w89c840_open() irq %d.\n", + dev->name, dev->irq); + + if((i=alloc_ringdesc(dev))) + goto out_err; + + spin_lock_irq(&np->lock); + netif_device_attach(dev); + init_registers(dev); + spin_unlock_irq(&np->lock); + + netif_start_queue(dev); + if (debug > 2) + printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name); + + /* Set the timer to check for link beat. */ + init_timer(&np->timer); + np->timer.expires = jiffies + 1*HZ; + np->timer.data = (unsigned long)dev; + np->timer.function = &netdev_timer; /* timer handler */ + add_timer(&np->timer); + return 0; +out_err: + netif_device_attach(dev); + return i; +} + +#define MII_DAVICOM_DM9101 0x0181b800 + +static int update_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int duplex, fasteth, result, mii_reg; + + /* BSMR */ + mii_reg = mdio_read(dev, np->phys[0], MII_BMSR); + + if (mii_reg == 0xffff) + return np->csr6; + /* reread: the link status bit is sticky */ + mii_reg = mdio_read(dev, np->phys[0], MII_BMSR); + if (!(mii_reg & 0x4)) { + if (netif_carrier_ok(dev)) { + if (debug) + printk(KERN_INFO "%s: MII #%d reports no link. Disabling watchdog.\n", + dev->name, np->phys[0]); + netif_carrier_off(dev); + } + return np->csr6; + } + if (!netif_carrier_ok(dev)) { + if (debug) + printk(KERN_INFO "%s: MII #%d link is back. Enabling watchdog.\n", + dev->name, np->phys[0]); + netif_carrier_on(dev); + } + + if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) { + /* If the link partner doesn't support autonegotiation + * the MII detects it's abilities with the "parallel detection". + * Some MIIs update the LPA register to the result of the parallel + * detection, some don't. + * The Davicom PHY [at least 0181b800] doesn't. + * Instead bit 9 and 13 of the BMCR are updated to the result + * of the negotiation.. + */ + mii_reg = mdio_read(dev, np->phys[0], MII_BMCR); + duplex = mii_reg & BMCR_FULLDPLX; + fasteth = mii_reg & BMCR_SPEED100; + } else { + int negotiated; + mii_reg = mdio_read(dev, np->phys[0], MII_LPA); + negotiated = mii_reg & np->mii_if.advertising; + + duplex = (negotiated & LPA_100FULL) || ((negotiated & 0x02C0) == LPA_10FULL); + fasteth = negotiated & 0x380; + } + duplex |= np->mii_if.force_media; + /* remove fastether and fullduplex */ + result = np->csr6 & ~0x20000200; + if (duplex) + result |= 0x200; + if (fasteth) + result |= 0x20000000; + if (result != np->csr6 && debug) + printk(KERN_INFO "%s: Setting %dMBit-%s-duplex based on MII#%d\n", + dev->name, fasteth ? 100 : 10, + duplex ? "full" : "half", np->phys[0]); + return result; +} + +#define RXTX_TIMEOUT 2000 +static inline void update_csr6(struct net_device *dev, int new) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + int limit = RXTX_TIMEOUT; + + if (!netif_device_present(dev)) + new = 0; + if (new==np->csr6) + return; + /* stop both Tx and Rx processes */ + iowrite32(np->csr6 & ~0x2002, ioaddr + NetworkConfig); + /* wait until they have really stopped */ + for (;;) { + int csr5 = ioread32(ioaddr + IntrStatus); + int t; + + t = (csr5 >> 17) & 0x07; + if (t==0||t==1) { + /* rx stopped */ + t = (csr5 >> 20) & 0x07; + if (t==0||t==1) + break; + } + + limit--; + if(!limit) { + printk(KERN_INFO "%s: couldn't stop rxtx, IntrStatus %xh.\n", + dev->name, csr5); + break; + } + udelay(1); + } + np->csr6 = new; + /* and restart them with the new configuration */ + iowrite32(np->csr6, ioaddr + NetworkConfig); + if (new & 0x200) + np->mii_if.full_duplex = 1; +} + +static void netdev_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + if (debug > 2) + printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x " + "config %8.8x.\n", + dev->name, ioread32(ioaddr + IntrStatus), + ioread32(ioaddr + NetworkConfig)); + spin_lock_irq(&np->lock); + update_csr6(dev, update_link(dev)); + spin_unlock_irq(&np->lock); + np->timer.expires = jiffies + 10*HZ; + add_timer(&np->timer); +} + +static void init_rxtx_rings(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + np->rx_head_desc = &np->rx_ring[0]; + np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE]; + + /* Initial all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].length = np->rx_buf_sz; + np->rx_ring[i].status = 0; + np->rx_skbuff[i] = NULL; + } + /* Mark the last entry as wrapping the ring. */ + np->rx_ring[i-1].length |= DescEndRing; + + /* Fill in the Rx buffers. Handle allocation failure gracefully. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[i] = skb; + if (skb == NULL) + break; + skb->dev = dev; /* Mark as being used by this device. */ + np->rx_addr[i] = pci_map_single(np->pci_dev,skb->tail, + skb->len,PCI_DMA_FROMDEVICE); + + np->rx_ring[i].buffer1 = np->rx_addr[i]; + np->rx_ring[i].status = DescOwn; + } + + np->cur_rx = 0; + np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + /* Initialize the Tx descriptors */ + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = NULL; + np->tx_ring[i].status = 0; + } + np->tx_full = 0; + np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0; + + iowrite32(np->ring_dma_addr, np->base_addr + RxRingPtr); + iowrite32(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE, + np->base_addr + TxRingPtr); + +} + +static void free_rxtx_rings(struct netdev_private* np) +{ + int i; + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].status = 0; + if (np->rx_skbuff[i]) { + pci_unmap_single(np->pci_dev, + np->rx_addr[i], + np->rx_skbuff[i]->len, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(np->rx_skbuff[i]); + } + np->rx_skbuff[i] = NULL; + } + for (i = 0; i < TX_RING_SIZE; i++) { + if (np->tx_skbuff[i]) { + pci_unmap_single(np->pci_dev, + np->tx_addr[i], + np->tx_skbuff[i]->len, + PCI_DMA_TODEVICE); + dev_kfree_skb(np->tx_skbuff[i]); + } + np->tx_skbuff[i] = NULL; + } +} + +static void init_registers(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + int i; + + for (i = 0; i < 6; i++) + iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i); + + /* Initialize other registers. */ +#ifdef __BIG_ENDIAN + i = (1<<20); /* Big-endian descriptors */ +#else + i = 0; +#endif + i |= (0x04<<2); /* skip length 4 u32 */ + i |= 0x02; /* give Rx priority */ + + /* Configure the PCI bus bursts and FIFO thresholds. + 486: Set 8 longword cache alignment, 8 longword burst. + 586: Set 16 longword cache alignment, no burst limit. + Cache alignment bits 15:14 Burst length 13:8 + 0000 <not allowed> 0000 align to cache 0800 8 longwords + 4000 8 longwords 0100 1 longword 1000 16 longwords + 8000 16 longwords 0200 2 longwords 2000 32 longwords + C000 32 longwords 0400 4 longwords */ + +#if defined (__i386__) && !defined(MODULE) + /* When not a module we can work around broken '486 PCI boards. */ + if (boot_cpu_data.x86 <= 4) { + i |= 0x4800; + printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache " + "alignment to 8 longwords.\n", dev->name); + } else { + i |= 0xE000; + } +#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) + i |= 0xE000; +#elif defined(__sparc__) + i |= 0x4800; +#else +#warning Processor architecture undefined + i |= 0x4800; +#endif + iowrite32(i, ioaddr + PCIBusCfg); + + np->csr6 = 0; + /* 128 byte Tx threshold; + Transmit on; Receive on; */ + update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev)); + + /* Clear and Enable interrupts by setting the interrupt mask. */ + iowrite32(0x1A0F5, ioaddr + IntrStatus); + iowrite32(0x1A0F5, ioaddr + IntrEnable); + + iowrite32(0, ioaddr + RxStartDemand); +} + +static void tx_timeout(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + printk(KERN_WARNING "%s: Transmit timed out, status %8.8x," + " resetting...\n", dev->name, ioread32(ioaddr + IntrStatus)); + + { + int i; + printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) + printk(" %8.8x", (unsigned int)np->rx_ring[i].status); + printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) + printk(" %8.8x", np->tx_ring[i].status); + printk("\n"); + } + printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d.\n", + np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes); + printk(KERN_DEBUG "Tx Descriptor addr %xh.\n",ioread32(ioaddr+0x4C)); + + disable_irq(dev->irq); + spin_lock_irq(&np->lock); + /* + * Under high load dirty_tx and the internal tx descriptor pointer + * come out of sync, thus perform a software reset and reinitialize + * everything. + */ + + iowrite32(1, np->base_addr+PCIBusCfg); + udelay(1); + + free_rxtx_rings(np); + init_rxtx_rings(dev); + init_registers(dev); + spin_unlock_irq(&np->lock); + enable_irq(dev->irq); + + netif_wake_queue(dev); + dev->trans_start = jiffies; + np->stats.tx_errors++; + return; +} + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static int alloc_ringdesc(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); + + np->rx_ring = pci_alloc_consistent(np->pci_dev, + sizeof(struct w840_rx_desc)*RX_RING_SIZE + + sizeof(struct w840_tx_desc)*TX_RING_SIZE, + &np->ring_dma_addr); + if(!np->rx_ring) + return -ENOMEM; + init_rxtx_rings(dev); + return 0; +} + +static void free_ringdesc(struct netdev_private *np) +{ + pci_free_consistent(np->pci_dev, + sizeof(struct w840_rx_desc)*RX_RING_SIZE + + sizeof(struct w840_tx_desc)*TX_RING_SIZE, + np->rx_ring, np->ring_dma_addr); + +} + +static int start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + unsigned entry; + + /* Caution: the write order is important here, set the field + with the "ownership" bits last. */ + + /* Calculate the next Tx descriptor entry. */ + entry = np->cur_tx % TX_RING_SIZE; + + np->tx_addr[entry] = pci_map_single(np->pci_dev, + skb->data,skb->len, PCI_DMA_TODEVICE); + np->tx_skbuff[entry] = skb; + + np->tx_ring[entry].buffer1 = np->tx_addr[entry]; + if (skb->len < TX_BUFLIMIT) { + np->tx_ring[entry].length = DescWholePkt | skb->len; + } else { + int len = skb->len - TX_BUFLIMIT; + + np->tx_ring[entry].buffer2 = np->tx_addr[entry]+TX_BUFLIMIT; + np->tx_ring[entry].length = DescWholePkt | (len << 11) | TX_BUFLIMIT; + } + if(entry == TX_RING_SIZE-1) + np->tx_ring[entry].length |= DescEndRing; + + /* Now acquire the irq spinlock. + * The difficult race is the the ordering between + * increasing np->cur_tx and setting DescOwn: + * - if np->cur_tx is increased first the interrupt + * handler could consider the packet as transmitted + * since DescOwn is cleared. + * - If DescOwn is set first the NIC could report the + * packet as sent, but the interrupt handler would ignore it + * since the np->cur_tx was not yet increased. + */ + spin_lock_irq(&np->lock); + np->cur_tx++; + + wmb(); /* flush length, buffer1, buffer2 */ + np->tx_ring[entry].status = DescOwn; + wmb(); /* flush status and kick the hardware */ + iowrite32(0, np->base_addr + TxStartDemand); + np->tx_q_bytes += skb->len; + /* Work around horrible bug in the chip by marking the queue as full + when we do not have FIFO room for a maximum sized packet. */ + if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN || + ((np->drv_flags & HasBrokenTx) && np->tx_q_bytes > TX_BUG_FIFO_LIMIT)) { + netif_stop_queue(dev); + wmb(); + np->tx_full = 1; + } + spin_unlock_irq(&np->lock); + + dev->trans_start = jiffies; + + if (debug > 4) { + printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", + dev->name, np->cur_tx, entry); + } + return 0; +} + +static void netdev_tx_done(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { + int entry = np->dirty_tx % TX_RING_SIZE; + int tx_status = np->tx_ring[entry].status; + + if (tx_status < 0) + break; + if (tx_status & 0x8000) { /* There was an error, log it. */ +#ifndef final_version + if (debug > 1) + printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n", + dev->name, tx_status); +#endif + np->stats.tx_errors++; + if (tx_status & 0x0104) np->stats.tx_aborted_errors++; + if (tx_status & 0x0C80) np->stats.tx_carrier_errors++; + if (tx_status & 0x0200) np->stats.tx_window_errors++; + if (tx_status & 0x0002) np->stats.tx_fifo_errors++; + if ((tx_status & 0x0080) && np->mii_if.full_duplex == 0) + np->stats.tx_heartbeat_errors++; + } else { +#ifndef final_version + if (debug > 3) + printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %8.8x.\n", + dev->name, entry, tx_status); +#endif + np->stats.tx_bytes += np->tx_skbuff[entry]->len; + np->stats.collisions += (tx_status >> 3) & 15; + np->stats.tx_packets++; + } + /* Free the original skb. */ + pci_unmap_single(np->pci_dev,np->tx_addr[entry], + np->tx_skbuff[entry]->len, + PCI_DMA_TODEVICE); + np->tx_q_bytes -= np->tx_skbuff[entry]->len; + dev_kfree_skb_irq(np->tx_skbuff[entry]); + np->tx_skbuff[entry] = NULL; + } + if (np->tx_full && + np->cur_tx - np->dirty_tx < TX_QUEUE_LEN_RESTART && + np->tx_q_bytes < TX_BUG_FIFO_LIMIT) { + /* The ring is no longer full, clear tbusy. */ + np->tx_full = 0; + wmb(); + netif_wake_queue(dev); + } +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs) +{ + struct net_device *dev = (struct net_device *)dev_instance; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + int work_limit = max_interrupt_work; + int handled = 0; + + if (!netif_device_present(dev)) + return IRQ_NONE; + do { + u32 intr_status = ioread32(ioaddr + IntrStatus); + + /* Acknowledge all of the current interrupt sources ASAP. */ + iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus); + + if (debug > 4) + printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", + dev->name, intr_status); + + if ((intr_status & (NormalIntr|AbnormalIntr)) == 0) + break; + + handled = 1; + + if (intr_status & (IntrRxDone | RxNoBuf)) + netdev_rx(dev); + if (intr_status & RxNoBuf) + iowrite32(0, ioaddr + RxStartDemand); + + if (intr_status & (TxIdle | IntrTxDone) && + np->cur_tx != np->dirty_tx) { + spin_lock(&np->lock); + netdev_tx_done(dev); + spin_unlock(&np->lock); + } + + /* Abnormal error summary/uncommon events handlers. */ + if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr | + TimerInt | IntrTxStopped)) + netdev_error(dev, intr_status); + + if (--work_limit < 0) { + printk(KERN_WARNING "%s: Too much work at interrupt, " + "status=0x%4.4x.\n", dev->name, intr_status); + /* Set the timer to re-enable the other interrupts after + 10*82usec ticks. */ + spin_lock(&np->lock); + if (netif_device_present(dev)) { + iowrite32(AbnormalIntr | TimerInt, ioaddr + IntrEnable); + iowrite32(10, ioaddr + GPTimer); + } + spin_unlock(&np->lock); + break; + } + } while (1); + + if (debug > 3) + printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", + dev->name, ioread32(ioaddr + IntrStatus)); + return IRQ_RETVAL(handled); +} + +/* This routine is logically part of the interrupt handler, but separated + for clarity and better register allocation. */ +static int netdev_rx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int entry = np->cur_rx % RX_RING_SIZE; + int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx; + + if (debug > 4) { + printk(KERN_DEBUG " In netdev_rx(), entry %d status %4.4x.\n", + entry, np->rx_ring[entry].status); + } + + /* If EOP is set on the next entry, it's a new packet. Send it up. */ + while (--work_limit >= 0) { + struct w840_rx_desc *desc = np->rx_head_desc; + s32 status = desc->status; + + if (debug > 4) + printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", + status); + if (status < 0) + break; + if ((status & 0x38008300) != 0x0300) { + if ((status & 0x38000300) != 0x0300) { + /* Ingore earlier buffers. */ + if ((status & 0xffff) != 0x7fff) { + printk(KERN_WARNING "%s: Oversized Ethernet frame spanned " + "multiple buffers, entry %#x status %4.4x!\n", + dev->name, np->cur_rx, status); + np->stats.rx_length_errors++; + } + } else if (status & 0x8000) { + /* There was a fatal error. */ + if (debug > 2) + printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n", + dev->name, status); + np->stats.rx_errors++; /* end of a packet.*/ + if (status & 0x0890) np->stats.rx_length_errors++; + if (status & 0x004C) np->stats.rx_frame_errors++; + if (status & 0x0002) np->stats.rx_crc_errors++; + } + } else { + struct sk_buff *skb; + /* Omit the four octet CRC from the length. */ + int pkt_len = ((status >> 16) & 0x7ff) - 4; + +#ifndef final_version + if (debug > 4) + printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" + " status %x.\n", pkt_len, status); +#endif + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak + && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb->dev = dev; + skb_reserve(skb, 2); /* 16 byte align the IP header */ + pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry], + np->rx_skbuff[entry]->len, + PCI_DMA_FROMDEVICE); + eth_copy_and_sum(skb, np->rx_skbuff[entry]->tail, pkt_len, 0); + skb_put(skb, pkt_len); + pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry], + np->rx_skbuff[entry]->len, + PCI_DMA_FROMDEVICE); + } else { + pci_unmap_single(np->pci_dev,np->rx_addr[entry], + np->rx_skbuff[entry]->len, + PCI_DMA_FROMDEVICE); + skb_put(skb = np->rx_skbuff[entry], pkt_len); + np->rx_skbuff[entry] = NULL; + } +#ifndef final_version /* Remove after testing. */ + /* You will want this info for the initial debug. */ + if (debug > 5) + printk(KERN_DEBUG " Rx data %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:" + "%2.2x %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x %2.2x%2.2x " + "%d.%d.%d.%d.\n", + skb->data[0], skb->data[1], skb->data[2], skb->data[3], + skb->data[4], skb->data[5], skb->data[6], skb->data[7], + skb->data[8], skb->data[9], skb->data[10], + skb->data[11], skb->data[12], skb->data[13], + skb->data[14], skb->data[15], skb->data[16], + skb->data[17]); +#endif + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->last_rx = jiffies; + np->stats.rx_packets++; + np->stats.rx_bytes += pkt_len; + } + entry = (++np->cur_rx) % RX_RING_SIZE; + np->rx_head_desc = &np->rx_ring[entry]; + } + + /* Refill the Rx ring buffers. */ + for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { + struct sk_buff *skb; + entry = np->dirty_rx % RX_RING_SIZE; + if (np->rx_skbuff[entry] == NULL) { + skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[entry] = skb; + if (skb == NULL) + break; /* Better luck next round. */ + skb->dev = dev; /* Mark as being used by this device. */ + np->rx_addr[entry] = pci_map_single(np->pci_dev, + skb->tail, + skb->len, PCI_DMA_FROMDEVICE); + np->rx_ring[entry].buffer1 = np->rx_addr[entry]; + } + wmb(); + np->rx_ring[entry].status = DescOwn; + } + + return 0; +} + +static void netdev_error(struct net_device *dev, int intr_status) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + if (debug > 2) + printk(KERN_DEBUG "%s: Abnormal event, %8.8x.\n", + dev->name, intr_status); + if (intr_status == 0xffffffff) + return; + spin_lock(&np->lock); + if (intr_status & TxFIFOUnderflow) { + int new; + /* Bump up the Tx threshold */ +#if 0 + /* This causes lots of dropped packets, + * and under high load even tx_timeouts + */ + new = np->csr6 + 0x4000; +#else + new = (np->csr6 >> 14)&0x7f; + if (new < 64) + new *= 2; + else + new = 127; /* load full packet before starting */ + new = (np->csr6 & ~(0x7F << 14)) | (new<<14); +#endif + printk(KERN_DEBUG "%s: Tx underflow, new csr6 %8.8x.\n", + dev->name, new); + update_csr6(dev, new); + } + if (intr_status & IntrRxDied) { /* Missed a Rx frame. */ + np->stats.rx_errors++; + } + if (intr_status & TimerInt) { + /* Re-enable other interrupts. */ + if (netif_device_present(dev)) + iowrite32(0x1A0F5, ioaddr + IntrEnable); + } + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; + iowrite32(0, ioaddr + RxStartDemand); + spin_unlock(&np->lock); +} + +static struct net_device_stats *get_stats(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + /* The chip only need report frame silently dropped. */ + spin_lock_irq(&np->lock); + if (netif_running(dev) && netif_device_present(dev)) + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; + spin_unlock_irq(&np->lock); + + return &np->stats; +} + + +static u32 __set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + u32 mc_filter[2]; /* Multicast hash filter */ + u32 rx_mode; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + /* Unconditionally log net taps. */ + printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); + memset(mc_filter, 0xff, sizeof(mc_filter)); + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAllPhys + | AcceptMyPhys; + } else if ((dev->mc_count > multicast_filter_limit) + || (dev->flags & IFF_ALLMULTI)) { + /* Too many to match, or accept all multicasts. */ + memset(mc_filter, 0xff, sizeof(mc_filter)); + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + } else { + struct dev_mc_list *mclist; + int i; + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + int filterbit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F; + filterbit &= 0x3f; + mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); + } + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + } + iowrite32(mc_filter[0], ioaddr + MulticastFilter0); + iowrite32(mc_filter[1], ioaddr + MulticastFilter1); + return rx_mode; +} + +static void set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + u32 rx_mode = __set_rx_mode(dev); + spin_lock_irq(&np->lock); + update_csr6(dev, (np->csr6 & ~0x00F8) | rx_mode); + spin_unlock_irq(&np->lock); +} + +static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct netdev_private *np = netdev_priv(dev); + + strcpy (info->driver, DRV_NAME); + strcpy (info->version, DRV_VERSION); + strcpy (info->bus_info, pci_name(np->pci_dev)); +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct netdev_private *np = netdev_priv(dev); + int rc; + + spin_lock_irq(&np->lock); + rc = mii_ethtool_gset(&np->mii_if, cmd); + spin_unlock_irq(&np->lock); + + return rc; +} + +static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct netdev_private *np = netdev_priv(dev); + int rc; + + spin_lock_irq(&np->lock); + rc = mii_ethtool_sset(&np->mii_if, cmd); + spin_unlock_irq(&np->lock); + + return rc; +} + +static int netdev_nway_reset(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return mii_nway_restart(&np->mii_if); +} + +static u32 netdev_get_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return mii_link_ok(&np->mii_if); +} + +static u32 netdev_get_msglevel(struct net_device *dev) +{ + return debug; +} + +static void netdev_set_msglevel(struct net_device *dev, u32 value) +{ + debug = value; +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .set_settings = netdev_set_settings, + .nway_reset = netdev_nway_reset, + .get_link = netdev_get_link, + .get_msglevel = netdev_get_msglevel, + .set_msglevel = netdev_set_msglevel, + .get_sg = ethtool_op_get_sg, + .get_tx_csum = ethtool_op_get_tx_csum, +}; + +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct mii_ioctl_data *data = if_mii(rq); + struct netdev_private *np = netdev_priv(dev); + + switch(cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + data->phy_id = ((struct netdev_private *)netdev_priv(dev))->phys[0] & 0x1f; + /* Fall Through */ + + case SIOCGMIIREG: /* Read MII PHY register. */ + spin_lock_irq(&np->lock); + data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f); + spin_unlock_irq(&np->lock); + return 0; + + case SIOCSMIIREG: /* Write MII PHY register. */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + spin_lock_irq(&np->lock); + mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); + spin_unlock_irq(&np->lock); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int netdev_close(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + netif_stop_queue(dev); + + if (debug > 1) { + printk(KERN_DEBUG "%s: Shutting down ethercard, status was %8.8x " + "Config %8.8x.\n", dev->name, ioread32(ioaddr + IntrStatus), + ioread32(ioaddr + NetworkConfig)); + printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", + dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx); + } + + /* Stop the chip's Tx and Rx processes. */ + spin_lock_irq(&np->lock); + netif_device_detach(dev); + update_csr6(dev, 0); + iowrite32(0x0000, ioaddr + IntrEnable); + spin_unlock_irq(&np->lock); + + free_irq(dev->irq, dev); + wmb(); + netif_device_attach(dev); + + if (ioread32(ioaddr + NetworkConfig) != 0xffffffff) + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; + +#ifdef __i386__ + if (debug > 2) { + int i; + + printk(KERN_DEBUG" Tx ring at %8.8x:\n", + (int)np->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) + printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n", + i, np->tx_ring[i].length, + np->tx_ring[i].status, np->tx_ring[i].buffer1); + printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + (int)np->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) { + printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", + i, np->rx_ring[i].length, + np->rx_ring[i].status, np->rx_ring[i].buffer1); + } + } +#endif /* __i386__ debugging only */ + + del_timer_sync(&np->timer); + + free_rxtx_rings(np); + free_ringdesc(np); + + return 0; +} + +static void __devexit w840_remove1 (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + struct netdev_private *np = netdev_priv(dev); + unregister_netdev(dev); + pci_release_regions(pdev); + pci_iounmap(pdev, np->base_addr); + free_netdev(dev); + } + + pci_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM + +/* + * suspend/resume synchronization: + * - open, close, do_ioctl: + * rtnl_lock, & netif_device_detach after the rtnl_unlock. + * - get_stats: + * spin_lock_irq(np->lock), doesn't touch hw if not present + * - hard_start_xmit: + * netif_stop_queue + spin_unlock_wait(&dev->xmit_lock); + * - tx_timeout: + * netif_device_detach + spin_unlock_wait(&dev->xmit_lock); + * - set_multicast_list + * netif_device_detach + spin_unlock_wait(&dev->xmit_lock); + * - interrupt handler + * doesn't touch hw if not present, synchronize_irq waits for + * running instances of the interrupt handler. + * + * Disabling hw requires clearing csr6 & IntrEnable. + * update_csr6 & all function that write IntrEnable check netif_device_present + * before settings any bits. + * + * Detach must occur under spin_unlock_irq(), interrupts from a detached + * device would cause an irq storm. + */ +static int w840_suspend (struct pci_dev *pdev, u32 state) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + rtnl_lock(); + if (netif_running (dev)) { + del_timer_sync(&np->timer); + + spin_lock_irq(&np->lock); + netif_device_detach(dev); + update_csr6(dev, 0); + iowrite32(0, ioaddr + IntrEnable); + netif_stop_queue(dev); + spin_unlock_irq(&np->lock); + + spin_unlock_wait(&dev->xmit_lock); + synchronize_irq(dev->irq); + + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; + + /* no more hardware accesses behind this line. */ + + if (np->csr6) BUG(); + if (ioread32(ioaddr + IntrEnable)) BUG(); + + /* pci_power_off(pdev, -1); */ + + free_rxtx_rings(np); + } else { + netif_device_detach(dev); + } + rtnl_unlock(); + return 0; +} + +static int w840_resume (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdev_private *np = netdev_priv(dev); + + rtnl_lock(); + if (netif_device_present(dev)) + goto out; /* device not suspended */ + if (netif_running(dev)) { + pci_enable_device(pdev); + /* pci_power_on(pdev); */ + + spin_lock_irq(&np->lock); + iowrite32(1, np->base_addr+PCIBusCfg); + ioread32(np->base_addr+PCIBusCfg); + udelay(1); + netif_device_attach(dev); + init_rxtx_rings(dev); + init_registers(dev); + spin_unlock_irq(&np->lock); + + netif_wake_queue(dev); + + mod_timer(&np->timer, jiffies + 1*HZ); + } else { + netif_device_attach(dev); + } +out: + rtnl_unlock(); + return 0; +} +#endif + +static struct pci_driver w840_driver = { + .name = DRV_NAME, + .id_table = w840_pci_tbl, + .probe = w840_probe1, + .remove = __devexit_p(w840_remove1), +#ifdef CONFIG_PM + .suspend = w840_suspend, + .resume = w840_resume, +#endif +}; + +static int __init w840_init(void) +{ + printk(version); + return pci_module_init(&w840_driver); +} + +static void __exit w840_exit(void) +{ + pci_unregister_driver(&w840_driver); +} + +module_init(w840_init); +module_exit(w840_exit); |