summaryrefslogtreecommitdiffstats
path: root/drivers/net/tulip
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tulip')
-rw-r--r--drivers/net/tulip/21142.c76
-rw-r--r--drivers/net/tulip/de2104x.c163
-rw-r--r--drivers/net/tulip/de4x5.c16
-rw-r--r--drivers/net/tulip/dmfe.c103
-rw-r--r--drivers/net/tulip/eeprom.c47
-rw-r--r--drivers/net/tulip/interrupt.c100
-rw-r--r--drivers/net/tulip/media.c74
-rw-r--r--drivers/net/tulip/pnic.c33
-rw-r--r--drivers/net/tulip/pnic2.c59
-rw-r--r--drivers/net/tulip/timer.c52
-rw-r--r--drivers/net/tulip/tulip_core.c187
-rw-r--r--drivers/net/tulip/uli526x.c64
-rw-r--r--drivers/net/tulip/winbond-840.c186
-rw-r--r--drivers/net/tulip/xircom_cb.c46
14 files changed, 609 insertions, 597 deletions
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 9f6742fad6c..007d8e75666 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -43,8 +43,8 @@ void t21142_media_task(struct work_struct *work)
if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
csr12 |= 6;
if (tulip_debug > 2)
- printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n",
- dev->name, csr12, medianame[dev->if_port]);
+ dev_info(&dev->dev, "21143 negotiation status %08x, %s\n",
+ csr12, medianame[dev->if_port]);
if (tulip_media_cap[dev->if_port] & MediaIsMII) {
if (tulip_check_duplex(dev) < 0) {
netif_carrier_off(dev);
@@ -56,23 +56,26 @@ void t21142_media_task(struct work_struct *work)
} else if (tp->nwayset) {
/* Don't screw up a negotiated session! */
if (tulip_debug > 1)
- printk(KERN_INFO"%s: Using NWay-set %s media, csr12 %8.8x.\n",
- dev->name, medianame[dev->if_port], csr12);
+ dev_info(&dev->dev,
+ "Using NWay-set %s media, csr12 %08x\n",
+ medianame[dev->if_port], csr12);
} else if (tp->medialock) {
;
} else if (dev->if_port == 3) {
if (csr12 & 2) { /* No 100mbps link beat, revert to 10mbps. */
if (tulip_debug > 1)
- printk(KERN_INFO"%s: No 21143 100baseTx link beat, %8.8x, "
- "trying NWay.\n", dev->name, csr12);
+ dev_info(&dev->dev,
+ "No 21143 100baseTx link beat, %08x, trying NWay\n",
+ csr12);
t21142_start_nway(dev);
next_tick = 3*HZ;
}
} else if ((csr12 & 0x7000) != 0x5000) {
/* Negotiation failed. Search media types. */
if (tulip_debug > 1)
- printk(KERN_INFO"%s: 21143 negotiation failed, status %8.8x.\n",
- dev->name, csr12);
+ dev_info(&dev->dev,
+ "21143 negotiation failed, status %08x\n",
+ csr12);
if (!(csr12 & 4)) { /* 10mbps link beat good. */
new_csr6 = 0x82420000;
dev->if_port = 0;
@@ -90,8 +93,8 @@ void t21142_media_task(struct work_struct *work)
iowrite32(1, ioaddr + CSR13);
}
if (tulip_debug > 1)
- printk(KERN_INFO"%s: Testing new 21143 media %s.\n",
- dev->name, medianame[dev->if_port]);
+ dev_info(&dev->dev, "Testing new 21143 media %s\n",
+ medianame[dev->if_port]);
if (new_csr6 != (tp->csr6 & ~0x00D5)) {
tp->csr6 &= 0x00D5;
tp->csr6 |= new_csr6;
@@ -119,8 +122,8 @@ void t21142_start_nway(struct net_device *dev)
tp->nway = tp->mediasense = 1;
tp->nwayset = tp->lpar = 0;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Restarting 21143 autonegotiation, csr14=%8.8x.\n",
- dev->name, csr14);
+ printk(KERN_DEBUG "%s: Restarting 21143 autonegotiation, csr14=%08x\n",
+ dev->name, csr14);
iowrite32(0x0001, ioaddr + CSR13);
udelay(100);
iowrite32(csr14, ioaddr + CSR14);
@@ -147,8 +150,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
csr12 |= 6;
if (tulip_debug > 1)
- printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, "
- "%8.8x.\n", dev->name, csr12, csr5, csr14);
+ dev_info(&dev->dev,
+ "21143 link status interrupt %08x, CSR5 %x, %08x\n",
+ csr12, csr5, csr14);
/* If NWay finished and we have a negotiated partner capability. */
if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) {
@@ -171,14 +175,15 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
if (tulip_debug > 1) {
if (tp->nwayset)
- printk(KERN_INFO "%s: Switching to %s based on link "
- "negotiation %4.4x & %4.4x = %4.4x.\n",
- dev->name, medianame[dev->if_port], tp->sym_advertise,
- tp->lpar, negotiated);
+ dev_info(&dev->dev,
+ "Switching to %s based on link negotiation %04x & %04x = %04x\n",
+ medianame[dev->if_port],
+ tp->sym_advertise, tp->lpar,
+ negotiated);
else
- printk(KERN_INFO "%s: Autonegotiation failed, using %s,"
- " link beat status %4.4x.\n",
- dev->name, medianame[dev->if_port], csr12);
+ dev_info(&dev->dev,
+ "Autonegotiation failed, using %s, link beat status %04x\n",
+ medianame[dev->if_port], csr12);
}
if (tp->mtable) {
@@ -201,14 +206,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
#if 0 /* Restart shouldn't be needed. */
iowrite32(tp->csr6 | RxOn, ioaddr + CSR6);
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Restarting Tx and Rx, CSR5 is %8.8x.\n",
- dev->name, ioread32(ioaddr + CSR5));
+ printk(KERN_DEBUG "%s: Restarting Tx and Rx, CSR5 is %08x\n",
+ dev->name, ioread32(ioaddr + CSR5));
#endif
tulip_start_rxtx(tp);
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Setting CSR6 %8.8x/%x CSR12 %8.8x.\n",
- dev->name, tp->csr6, ioread32(ioaddr + CSR6),
- ioread32(ioaddr + CSR12));
+ printk(KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n",
+ dev->name, tp->csr6, ioread32(ioaddr + CSR6),
+ ioread32(ioaddr + CSR12));
} else if ((tp->nwayset && (csr5 & 0x08000000) &&
(dev->if_port == 3 || dev->if_port == 5) &&
(csr12 & 2) == 2) ||
@@ -220,9 +225,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
add_timer(&tp->timer);
} else if (dev->if_port == 3 || dev->if_port == 5) {
if (tulip_debug > 1)
- printk(KERN_INFO"%s: 21143 %s link beat %s.\n",
- dev->name, medianame[dev->if_port],
- (csr12 & 2) ? "failed" : "good");
+ dev_info(&dev->dev, "21143 %s link beat %s\n",
+ medianame[dev->if_port],
+ (csr12 & 2) ? "failed" : "good");
if ((csr12 & 2) && ! tp->medialock) {
del_timer_sync(&tp->timer);
t21142_start_nway(dev);
@@ -232,21 +237,18 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
iowrite32(csr14 & ~0x080, ioaddr + CSR14);
} else if (dev->if_port == 0 || dev->if_port == 4) {
if ((csr12 & 4) == 0)
- printk(KERN_INFO"%s: 21143 10baseT link beat good.\n",
- dev->name);
+ dev_info(&dev->dev, "21143 10baseT link beat good\n");
} else if (!(csr12 & 4)) { /* 10mbps link beat good. */
if (tulip_debug)
- printk(KERN_INFO"%s: 21143 10mbps sensed media.\n",
- dev->name);
+ dev_info(&dev->dev, "21143 10mbps sensed media\n");
dev->if_port = 0;
} else if (tp->nwayset) {
if (tulip_debug)
- printk(KERN_INFO"%s: 21143 using NWay-set %s, csr6 %8.8x.\n",
- dev->name, medianame[dev->if_port], tp->csr6);
+ dev_info(&dev->dev, "21143 using NWay-set %s, csr6 %08x\n",
+ medianame[dev->if_port], tp->csr6);
} else { /* 100mbps link beat good. */
if (tulip_debug)
- printk(KERN_INFO"%s: 21143 100baseTx sensed media.\n",
- dev->name);
+ dev_info(&dev->dev, "21143 100baseTx sensed media\n");
dev->if_port = 3;
tp->csr6 = 0x838E0000 | (tp->csr6 & 0x20ff);
iowrite32(0x0003FF7F, ioaddr + CSR14);
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d4255d44cb7..cb429723b2c 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -337,7 +337,7 @@ static void de21041_media_timer (unsigned long data);
static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media);
-static struct pci_device_id de_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(de_pci_tbl) = {
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS,
@@ -382,9 +382,9 @@ static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (netif_msg_rx_err(de))
- printk(KERN_WARNING "%s: Oversized Ethernet frame "
- "spanned multiple buffers, status %8.8x!\n",
- de->dev->name, status);
+ dev_warn(&de->dev->dev,
+ "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+ status);
de->net_stats.rx_length_errors++;
}
} else if (status & RxError) {
@@ -487,7 +487,7 @@ rx_next:
}
if (!rx_work)
- printk(KERN_WARNING "%s: rx work limit reached\n", de->dev->name);
+ dev_warn(&de->dev->dev, "rx work limit reached\n");
de->rx_tail = rx_tail;
}
@@ -504,7 +504,8 @@ static irqreturn_t de_interrupt (int irq, void *dev_instance)
if (netif_msg_intr(de))
printk(KERN_DEBUG "%s: intr, status %08x mode %08x desc %u/%u/%u\n",
- dev->name, status, dr32(MacMode), de->rx_tail, de->tx_head, de->tx_tail);
+ dev->name, status, dr32(MacMode),
+ de->rx_tail, de->tx_head, de->tx_tail);
dw32(MacStatus, status);
@@ -529,8 +530,9 @@ static irqreturn_t de_interrupt (int irq, void *dev_instance)
pci_read_config_word(de->pdev, PCI_STATUS, &pci_status);
pci_write_config_word(de->pdev, PCI_STATUS, pci_status);
- printk(KERN_ERR "%s: PCI bus error, status=%08x, PCI status=%04x\n",
- dev->name, status, pci_status);
+ dev_err(&de->dev->dev,
+ "PCI bus error, status=%08x, PCI status=%04x\n",
+ status, pci_status);
}
return IRQ_HANDLED;
@@ -582,7 +584,8 @@ static void de_tx (struct de_private *de)
de->net_stats.tx_packets++;
de->net_stats.tx_bytes += skb->len;
if (netif_msg_tx_done(de))
- printk(KERN_DEBUG "%s: tx done, slot %d\n", de->dev->name, tx_tail);
+ printk(KERN_DEBUG "%s: tx done, slot %d\n",
+ de->dev->name, tx_tail);
}
dev_kfree_skb_irq(skb);
}
@@ -674,18 +677,17 @@ static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
memset(hash_table, 0, sizeof(hash_table));
set_bit_le(255, hash_table); /* Broadcast entry */
/* This should work on big-endian machines as well. */
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
set_bit_le(index, hash_table);
+ }
- for (i = 0; i < 32; i++) {
- *setup_frm++ = hash_table[i];
- *setup_frm++ = hash_table[i];
- }
- setup_frm = &de->setup_frame[13*6];
+ for (i = 0; i < 32; i++) {
+ *setup_frm++ = hash_table[i];
+ *setup_frm++ = hash_table[i];
}
+ setup_frm = &de->setup_frame[13*6];
/* Fill the final entry with our physical address. */
eaddrs = (u16 *)dev->dev_addr;
@@ -698,20 +700,18 @@ static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
{
struct de_private *de = netdev_priv(dev);
struct dev_mc_list *mclist;
- int i;
u16 *eaddrs;
/* We have <= 14 addresses so we can use the wonderful
16 address perfect filtering of the Tulip. */
- for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
eaddrs = (u16 *)mclist->dmi_addr;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
}
/* Fill the unused entries with the broadcast address. */
- memset(setup_frm, 0xff, (15-i)*12);
+ memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12);
setup_frm = &de->setup_frame[15*6];
/* Fill the final entry with our physical address. */
@@ -738,7 +738,7 @@ static void __de_set_rx_mode (struct net_device *dev)
goto out;
}
- if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) {
+ if ((netdev_mc_count(dev) > 1000) || (dev->flags & IFF_ALLMULTI)) {
/* Too many to filter well -- accept all multicasts. */
macmode |= AcceptAllMulticast;
goto out;
@@ -746,7 +746,7 @@ static void __de_set_rx_mode (struct net_device *dev)
/* Note that only the low-address shortword of setup_frame is valid!
The values are doubled for big-endian architectures. */
- if (dev->mc_count > 14) /* Must use a multicast hash table. */
+ if (netdev_mc_count(dev) > 14) /* Must use a multicast hash table. */
build_setup_frame_hash (de->setup_frame, dev);
else
build_setup_frame_perfect (de->setup_frame, dev);
@@ -870,7 +870,7 @@ static void de_stop_rxtx (struct de_private *de)
udelay(100);
}
- printk(KERN_WARNING "%s: timeout expired stopping DMA\n", de->dev->name);
+ dev_warn(&de->dev->dev, "timeout expired stopping DMA\n");
}
static inline void de_start_rxtx (struct de_private *de)
@@ -905,8 +905,8 @@ static void de_link_up(struct de_private *de)
if (!netif_carrier_ok(de->dev)) {
netif_carrier_on(de->dev);
if (netif_msg_link(de))
- printk(KERN_INFO "%s: link up, media %s\n",
- de->dev->name, media_name[de->media_type]);
+ dev_info(&de->dev->dev, "link up, media %s\n",
+ media_name[de->media_type]);
}
}
@@ -915,7 +915,7 @@ static void de_link_down(struct de_private *de)
if (netif_carrier_ok(de->dev)) {
netif_carrier_off(de->dev);
if (netif_msg_link(de))
- printk(KERN_INFO "%s: link down\n", de->dev->name);
+ dev_info(&de->dev->dev, "link down\n");
}
}
@@ -925,7 +925,8 @@ static void de_set_media (struct de_private *de)
u32 macmode = dr32(MacMode);
if (de_is_running(de))
- printk(KERN_WARNING "%s: chip is running while changing media!\n", de->dev->name);
+ dev_warn(&de->dev->dev,
+ "chip is running while changing media!\n");
if (de->de21040)
dw32(CSR11, FULL_DUPLEX_MAGIC);
@@ -945,15 +946,15 @@ static void de_set_media (struct de_private *de)
macmode &= ~FullDuplex;
if (netif_msg_link(de)) {
- printk(KERN_INFO
- "%s: set link %s\n"
- "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
- "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
- de->dev->name, media_name[media],
- de->dev->name, dr32(MacMode), dr32(SIAStatus),
- dr32(CSR13), dr32(CSR14), dr32(CSR15),
- de->dev->name, macmode, de->media[media].csr13,
- de->media[media].csr14, de->media[media].csr15);
+ dev_info(&de->dev->dev, "set link %s\n", media_name[media]);
+ dev_info(&de->dev->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n",
+ dr32(MacMode), dr32(SIAStatus),
+ dr32(CSR13), dr32(CSR14), dr32(CSR15));
+
+ dev_info(&de->dev->dev,
+ "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+ macmode, de->media[media].csr13,
+ de->media[media].csr14, de->media[media].csr15);
}
if (macmode != dr32(MacMode))
dw32(MacMode, macmode);
@@ -992,9 +993,8 @@ static void de21040_media_timer (unsigned long data)
de_link_up(de);
else
if (netif_msg_timer(de))
- printk(KERN_INFO "%s: %s link ok, status %x\n",
- dev->name, media_name[de->media_type],
- status);
+ dev_info(&dev->dev, "%s link ok, status %x\n",
+ media_name[de->media_type], status);
return;
}
@@ -1022,8 +1022,8 @@ no_link_yet:
add_timer(&de->media_timer);
if (netif_msg_timer(de))
- printk(KERN_INFO "%s: no link, trying media %s, status %x\n",
- dev->name, media_name[de->media_type], status);
+ dev_info(&dev->dev, "no link, trying media %s, status %x\n",
+ media_name[de->media_type], status);
}
static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media)
@@ -1079,9 +1079,10 @@ static void de21041_media_timer (unsigned long data)
de_link_up(de);
else
if (netif_msg_timer(de))
- printk(KERN_INFO "%s: %s link ok, mode %x status %x\n",
- dev->name, media_name[de->media_type],
- dr32(MacMode), status);
+ dev_info(&dev->dev,
+ "%s link ok, mode %x status %x\n",
+ media_name[de->media_type],
+ dr32(MacMode), status);
return;
}
@@ -1150,8 +1151,8 @@ no_link_yet:
add_timer(&de->media_timer);
if (netif_msg_timer(de))
- printk(KERN_INFO "%s: no link, trying media %s, status %x\n",
- dev->name, media_name[de->media_type], status);
+ dev_info(&dev->dev, "no link, trying media %s, status %x\n",
+ media_name[de->media_type], status);
}
static void de_media_interrupt (struct de_private *de, u32 status)
@@ -1378,8 +1379,7 @@ static int de_open (struct net_device *dev)
rc = de_alloc_rings(de);
if (rc) {
- printk(KERN_ERR "%s: ring allocation failure, err=%d\n",
- dev->name, rc);
+ dev_err(&dev->dev, "ring allocation failure, err=%d\n", rc);
return rc;
}
@@ -1387,15 +1387,14 @@ static int de_open (struct net_device *dev)
rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev);
if (rc) {
- printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n",
- dev->name, dev->irq, rc);
+ dev_err(&dev->dev, "IRQ %d request failure, err=%d\n",
+ dev->irq, rc);
goto err_out_free;
}
rc = de_init_hw(de);
if (rc) {
- printk(KERN_ERR "%s: h/w init failure, err=%d\n",
- dev->name, rc);
+ dev_err(&dev->dev, "h/w init failure, err=%d\n", rc);
goto err_out_free_irq;
}
@@ -1666,8 +1665,8 @@ static int de_nway_reset(struct net_device *dev)
status = dr32(SIAStatus);
dw32(SIAStatus, (status & ~NWayState) | NWayRestart);
if (netif_msg_link(de))
- printk(KERN_INFO "%s: link nway restart, status %x,%x\n",
- de->dev->name, status, dr32(SIAStatus));
+ dev_info(&de->dev->dev, "link nway restart, status %x,%x\n",
+ status, dr32(SIAStatus));
return 0;
}
@@ -1711,7 +1710,7 @@ static void __devinit de21040_get_mac_address (struct de_private *de)
de->dev->dev_addr[i] = value;
udelay(1);
if (boguscnt <= 0)
- printk(KERN_WARNING PFX "timeout reading 21040 MAC address byte %u\n", i);
+ pr_warning(PFX "timeout reading 21040 MAC address byte %u\n", i);
}
}
@@ -1830,9 +1829,8 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
}
if (netif_msg_probe(de))
- printk(KERN_INFO "de%d: SROM leaf offset %u, default media %s\n",
- de->board_idx, ofs,
- media_name[de->media_type]);
+ pr_info("de%d: SROM leaf offset %u, default media %s\n",
+ de->board_idx, ofs, media_name[de->media_type]);
/* init SIA register values to defaults */
for (i = 0; i < DE_MAX_MEDIA; i++) {
@@ -1879,9 +1877,9 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
de->media[idx].type = idx;
if (netif_msg_probe(de))
- printk(KERN_INFO "de%d: media block #%u: %s",
- de->board_idx, i,
- media_name[de->media[idx].type]);
+ pr_info("de%d: media block #%u: %s",
+ de->board_idx, i,
+ media_name[de->media[idx].type]);
bufp += sizeof (ib->opts);
@@ -1893,13 +1891,13 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
sizeof(ib->csr15);
if (netif_msg_probe(de))
- printk(" (%x,%x,%x)\n",
- de->media[idx].csr13,
- de->media[idx].csr14,
- de->media[idx].csr15);
+ pr_cont(" (%x,%x,%x)\n",
+ de->media[idx].csr13,
+ de->media[idx].csr14,
+ de->media[idx].csr15);
} else if (netif_msg_probe(de))
- printk("\n");
+ pr_cont("\n");
if (bufp > ((void *)&ee_data[DE_EEPROM_SIZE - 3]))
break;
@@ -2005,7 +2003,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
/* check for invalid IRQ value */
if (pdev->irq < 2) {
rc = -EIO;
- printk(KERN_ERR PFX "invalid irq (%d) for pci dev %s\n",
+ pr_err(PFX "invalid irq (%d) for pci dev %s\n",
pdev->irq, pci_name(pdev));
goto err_out_res;
}
@@ -2016,14 +2014,14 @@ static int __devinit de_init_one (struct pci_dev *pdev,
pciaddr = pci_resource_start(pdev, 1);
if (!pciaddr) {
rc = -EIO;
- printk(KERN_ERR PFX "no MMIO resource for pci dev %s\n",
- pci_name(pdev));
+ pr_err(PFX "no MMIO resource for pci dev %s\n", pci_name(pdev));
goto err_out_res;
}
if (pci_resource_len(pdev, 1) < DE_REGS_SIZE) {
rc = -EIO;
- printk(KERN_ERR PFX "MMIO resource (%llx) too small on pci dev %s\n",
- (unsigned long long)pci_resource_len(pdev, 1), pci_name(pdev));
+ pr_err(PFX "MMIO resource (%llx) too small on pci dev %s\n",
+ (unsigned long long)pci_resource_len(pdev, 1),
+ pci_name(pdev));
goto err_out_res;
}
@@ -2031,9 +2029,9 @@ static int __devinit de_init_one (struct pci_dev *pdev,
regs = ioremap_nocache(pciaddr, DE_REGS_SIZE);
if (!regs) {
rc = -EIO;
- printk(KERN_ERR PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
- (unsigned long long)pci_resource_len(pdev, 1),
- pciaddr, pci_name(pdev));
+ pr_err(PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
+ (unsigned long long)pci_resource_len(pdev, 1),
+ pciaddr, pci_name(pdev));
goto err_out_res;
}
dev->base_addr = (unsigned long) regs;
@@ -2044,8 +2042,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
/* make sure hardware is not running */
rc = de_reset_mac(de);
if (rc) {
- printk(KERN_ERR PFX "Cannot reset MAC, pci dev %s\n",
- pci_name(pdev));
+ pr_err(PFX "Cannot reset MAC, pci dev %s\n", pci_name(pdev));
goto err_out_iomap;
}
@@ -2065,12 +2062,11 @@ static int __devinit de_init_one (struct pci_dev *pdev,
goto err_out_iomap;
/* print info about board and interface just registered */
- printk (KERN_INFO "%s: %s at 0x%lx, %pM, IRQ %d\n",
- dev->name,
- de->de21040 ? "21040" : "21041",
- dev->base_addr,
- dev->dev_addr,
- dev->irq);
+ dev_info(&dev->dev, "%s at 0x%lx, %pM, IRQ %d\n",
+ de->de21040 ? "21040" : "21041",
+ dev->base_addr,
+ dev->dev_addr,
+ dev->irq);
pci_set_drvdata(pdev, dev);
@@ -2158,8 +2154,7 @@ static int de_resume (struct pci_dev *pdev)
if (!netif_running(dev))
goto out_attach;
if ((retval = pci_enable_device(pdev))) {
- printk (KERN_ERR "%s: pci_enable_device failed in resume\n",
- dev->name);
+ dev_err(&dev->dev, "pci_enable_device failed in resume\n");
goto out;
}
de_init_hw(de);
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index a8349b7200b..c4ecb9a9540 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -1951,9 +1951,9 @@ static void
SetMulticastFilter(struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
- struct dev_mc_list *dmi=dev->mc_list;
+ struct dev_mc_list *dmi;
u_long iobase = dev->base_addr;
- int i, j, bit, byte;
+ int i, bit, byte;
u16 hashcode;
u32 omr, crc;
char *pa;
@@ -1963,12 +1963,11 @@ SetMulticastFilter(struct net_device *dev)
omr &= ~(OMR_PR | OMR_PM);
pa = build_setup_frame(dev, ALL); /* Build the basic frame */
- if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 14)) {
+ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 14)) {
omr |= OMR_PM; /* Pass all multicasts */
} else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */
- for (i=0;i<dev->mc_count;i++) { /* for each address in the list */
- addrs=dmi->dmi_addr;
- dmi=dmi->next;
+ netdev_for_each_mc_addr(dmi, dev) {
+ addrs = dmi->dmi_addr;
if ((*addrs & 0x01) == 1) { /* multicast address? */
crc = ether_crc_le(ETH_ALEN, addrs);
hashcode = crc & HASH_BITS; /* hashcode is 9 LSb of CRC */
@@ -1984,9 +1983,8 @@ SetMulticastFilter(struct net_device *dev)
}
}
} else { /* Perfect filtering */
- for (j=0; j<dev->mc_count; j++) {
- addrs=dmi->dmi_addr;
- dmi=dmi->next;
+ netdev_for_each_mc_addr(dmi, dev) {
+ addrs = dmi->dmi_addr;
for (i=0; i<ETH_ALEN; i++) {
*(pa + (i&1)) = *addrs++;
if (i & 0x01) pa += 4;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 6f44ebf5891..95b38d803e9 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -61,6 +61,8 @@
Test and make sure PCI latency is now correct for all cases.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "dmfe"
#define DRV_VERSION "1.36.4"
#define DRV_RELDATE "2002-01-17"
@@ -149,16 +151,17 @@
#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
-#define DMFE_DBUG(dbug_now, msg, value) \
- do { \
- if (dmfe_debug || (dbug_now)) \
- printk(KERN_ERR DRV_NAME ": %s %lx\n",\
- (msg), (long) (value)); \
+#define DMFE_DBUG(dbug_now, msg, value) \
+ do { \
+ if (dmfe_debug || (dbug_now)) \
+ pr_err("%s %lx\n", \
+ (msg), (long) (value)); \
} while (0)
-#define SHOW_MEDIA_TYPE(mode) \
- printk (KERN_INFO DRV_NAME ": Change Speed to %sMhz %s duplex\n" , \
- (mode & 1) ? "100":"10", (mode & 4) ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode) \
+ pr_info("Change Speed to %sMhz %s duplex\n" , \
+ (mode & 1) ? "100":"10", \
+ (mode & 4) ? "full":"half");
/* CR9 definition: SROM/MII */
@@ -327,8 +330,8 @@ static void poll_dmfe (struct net_device *dev);
static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long);
static void allocate_rx_buffer(struct dmfe_board_info *);
static void update_cr6(u32, unsigned long);
-static void send_filter_frame(struct DEVICE * ,int);
-static void dm9132_id_table(struct DEVICE * ,int);
+static void send_filter_frame(struct DEVICE *);
+static void dm9132_id_table(struct DEVICE *);
static u16 phy_read(unsigned long, u8, u8, u32);
static void phy_write(unsigned long, u8, u8, u16, u32);
static void phy_write_1bit(unsigned long, u32);
@@ -391,8 +394,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
struct device_node *dp = pci_device_to_OF_node(pdev);
if (dp && of_get_property(dp, "local-mac-address", NULL)) {
- printk(KERN_INFO DRV_NAME
- ": skipping on-board DM910x (use tulip)\n");
+ pr_info("skipping on-board DM910x (use tulip)\n");
return -ENODEV;
}
}
@@ -405,8 +407,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING DRV_NAME
- ": 32-bit PCI DMA not available.\n");
+ pr_warning("32-bit PCI DMA not available\n");
err = -ENODEV;
goto err_out_free;
}
@@ -417,13 +418,13 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
goto err_out_free;
if (!pci_resource_start(pdev, 0)) {
- printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ pr_err("I/O base is zero\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
- printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ pr_err("Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
}
@@ -438,7 +439,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
#endif
if (pci_request_regions(pdev, DRV_NAME)) {
- printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ pr_err("Failed to request PCI regions\n");
err = -ENODEV;
goto err_out_disable;
}
@@ -497,12 +498,9 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
if (err)
goto err_out_free_buf;
- printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, %pM, irq %d.\n",
- dev->name,
- ent->driver_data >> 16,
- pci_name(pdev),
- dev->dev_addr,
- dev->irq);
+ dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n",
+ ent->driver_data >> 16,
+ pci_name(pdev), dev->dev_addr, dev->irq);
pci_set_master(pdev);
@@ -660,9 +658,9 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
/* Send setup frame */
if (db->chip_id == PCI_DM9132_ID)
- dm9132_id_table(dev, dev->mc_count); /* DM9132 */
+ dm9132_id_table(dev); /* DM9132 */
else
- send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */
+ send_filter_frame(dev); /* DM9102/DM9102A */
/* Init CR7, interrupt active bit */
db->cr7_data = CR7_DEFAULT;
@@ -696,7 +694,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
- printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+ pr_err("big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -706,8 +704,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
/* No Tx resource check, it never happen nromally */
if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
- printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n",
- db->tx_queue_cnt);
+ pr_err("No Tx resource %ld\n", db->tx_queue_cnt);
return NETDEV_TX_BUSY;
}
@@ -779,12 +776,11 @@ static int dmfe_stop(struct DEVICE *dev)
#if 0
/* show statistic counter */
- printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx"
- " LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
- db->tx_fifo_underrun, db->tx_excessive_collision,
- db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
- db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
- db->reset_fatal, db->reset_TXtimeout);
+ printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+ db->tx_fifo_underrun, db->tx_excessive_collision,
+ db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
+ db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
+ db->reset_fatal, db->reset_TXtimeout);
#endif
return 0;
@@ -885,7 +881,7 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
txptr = db->tx_remove_ptr;
while(db->tx_packet_cnt) {
tdes0 = le32_to_cpu(txptr->tdes0);
- /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ pr_debug("tdes0=%x\n", tdes0);
if (tdes0 & 0x80000000)
break;
@@ -895,7 +891,7 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
/* Transmit statistic counter */
if ( tdes0 != 0x7fffffff ) {
- /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ pr_debug("tdes0=%x\n", tdes0);
dev->stats.collisions += (tdes0 >> 3) & 0xf;
dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
if (tdes0 & TDES0_ERR_MASK) {
@@ -992,7 +988,7 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
/* error summary bit check */
if (rdes0 & 0x8000) {
/* This is a error packet */
- //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
+ pr_debug("rdes0: %x\n", rdes0);
dev->stats.rx_errors++;
if (rdes0 & 1)
dev->stats.rx_fifo_errors++;
@@ -1056,6 +1052,7 @@ static void dmfe_set_filter_mode(struct DEVICE * dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
unsigned long flags;
+ int mc_count = netdev_mc_count(dev);
DMFE_DBUG(0, "dmfe_set_filter_mode()", 0);
spin_lock_irqsave(&db->lock, flags);
@@ -1068,19 +1065,19 @@ static void dmfe_set_filter_mode(struct DEVICE * dev)
return;
}
- if (dev->flags & IFF_ALLMULTI || dev->mc_count > DMFE_MAX_MULTICAST) {
- DMFE_DBUG(0, "Pass all multicast address", dev->mc_count);
+ if (dev->flags & IFF_ALLMULTI || mc_count > DMFE_MAX_MULTICAST) {
+ DMFE_DBUG(0, "Pass all multicast address", mc_count);
db->cr6_data &= ~(CR6_PM | CR6_PBF);
db->cr6_data |= CR6_PAM;
spin_unlock_irqrestore(&db->lock, flags);
return;
}
- DMFE_DBUG(0, "Set multicast address", dev->mc_count);
+ DMFE_DBUG(0, "Set multicast address", mc_count);
if (db->chip_id == PCI_DM9132_ID)
- dm9132_id_table(dev, dev->mc_count); /* DM9132 */
+ dm9132_id_table(dev); /* DM9132 */
else
- send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */
+ send_filter_frame(dev); /* DM9102/DM9102A */
spin_unlock_irqrestore(&db->lock, flags);
}
@@ -1191,8 +1188,7 @@ static void dmfe_timer(unsigned long data)
if ( time_after(jiffies, dev->trans_start + DMFE_TX_TIMEOUT) ) {
db->reset_TXtimeout++;
db->wait_reset = 1;
- printk(KERN_WARNING "%s: Tx timeout - resetting\n",
- dev->name);
+ dev_warn(&dev->dev, "Tx timeout - resetting\n");
}
}
@@ -1456,7 +1452,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
* This setup frame initilize DM910X address filter mode
*/
-static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
+static void dm9132_id_table(struct DEVICE *dev)
{
struct dev_mc_list *mcptr;
u16 * addrptr;
@@ -1476,15 +1472,14 @@ static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
ioaddr += 4;
/* Clear Hash Table */
- for (i = 0; i < 4; i++)
- hash_table[i] = 0x0;
+ memset(hash_table, 0, sizeof(hash_table));
/* broadcast address */
hash_table[3] = 0x8000;
/* the multicast address in Hash Table : 64 bits */
- for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
- hash_val = cal_CRC( (char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+ netdev_for_each_mc_addr(mcptr, dev) {
+ hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
}
@@ -1499,7 +1494,7 @@ static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
* This setup frame initilize DM910X address filter mode
*/
-static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
+static void send_filter_frame(struct DEVICE *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
struct dev_mc_list *mcptr;
@@ -1525,14 +1520,14 @@ static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
*suptr++ = 0xffff;
/* fit the multicast address */
- for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ netdev_for_each_mc_addr(mcptr, dev) {
addrptr = (u16 *) mcptr->dmi_addr;
*suptr++ = addrptr[0];
*suptr++ = addrptr[1];
*suptr++ = addrptr[2];
}
- for (; i<14; i++) {
+ for (i = netdev_mc_count(dev); i < 14; i++) {
*suptr++ = 0xffff;
*suptr++ = 0xffff;
*suptr++ = 0xffff;
@@ -1646,7 +1641,7 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db)
else /* DM9102/DM9102A */
phy_mode = phy_read(db->ioaddr,
db->phy_addr, 17, db->chip_id) & 0xf000;
- /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
+ pr_debug("Phy_mode %x\n", phy_mode);
switch (phy_mode) {
case 0x1000: db->op_mode = DMFE_10MHF; break;
case 0x2000: db->op_mode = DMFE_10MFD; break;
@@ -2089,7 +2084,7 @@ static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
-static struct pci_device_id dmfe_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(dmfe_pci_tbl) = {
{ 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID },
{ 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID },
{ 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID },
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 889f57aae89..93f4e8309f8 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -161,15 +161,15 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
if (ee_data[0] == 0xff) {
if (last_mediatable) {
controller_index++;
- printk(KERN_INFO "%s: Controller %d of multiport board.\n",
- dev->name, controller_index);
+ dev_info(&dev->dev,
+ "Controller %d of multiport board\n",
+ controller_index);
tp->mtable = last_mediatable;
ee_data = last_ee_data;
goto subsequent_board;
} else
- printk(KERN_INFO "%s: Missing EEPROM, this interface may "
- "not work correctly!\n",
- dev->name);
+ dev_info(&dev->dev,
+ "Missing EEPROM, this interface may not work correctly!\n");
return;
}
/* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,16 +181,15 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
i++; /* An Accton EN1207, not an outlaw Maxtech. */
memcpy(ee_data + 26, eeprom_fixups[i].newtable,
sizeof(eeprom_fixups[i].newtable));
- printk(KERN_INFO "%s: Old format EEPROM on '%s' board. Using"
- " substitute media control info.\n",
- dev->name, eeprom_fixups[i].name);
+ dev_info(&dev->dev,
+ "Old format EEPROM on '%s' board. Using substitute media control info\n",
+ eeprom_fixups[i].name);
break;
}
}
if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
- printk(KERN_INFO "%s: Old style EEPROM with no media selection "
- "information.\n",
- dev->name);
+ dev_info(&dev->dev,
+ "Old style EEPROM with no media selection information\n");
return;
}
}
@@ -218,7 +217,8 @@ subsequent_board:
/* there is no phy information, don't even try to build mtable */
if (count == 0) {
if (tulip_debug > 0)
- printk(KERN_WARNING "%s: no phy info, aborting mtable build\n", dev->name);
+ dev_warn(&dev->dev,
+ "no phy info, aborting mtable build\n");
return;
}
@@ -234,8 +234,8 @@ subsequent_board:
mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
mtable->csr15dir = mtable->csr15val = 0;
- printk(KERN_INFO "%s: EEPROM default media type %s.\n", dev->name,
- media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+ dev_info(&dev->dev, "EEPROM default media type %s\n",
+ media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
for (i = 0; i < count; i++) {
struct medialeaf *leaf = &mtable->mleaf[i];
@@ -298,16 +298,17 @@ subsequent_board:
}
if (tulip_debug > 1 && leaf->media == 11) {
unsigned char *bp = leaf->leafdata;
- printk(KERN_INFO "%s: MII interface PHY %d, setup/reset "
- "sequences %d/%d long, capabilities %2.2x %2.2x.\n",
- dev->name, bp[0], bp[1], bp[2 + bp[1]*2],
- bp[5 + bp[2 + bp[1]*2]*2], bp[4 + bp[2 + bp[1]*2]*2]);
+ dev_info(&dev->dev,
+ "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+ bp[0], bp[1], bp[2 + bp[1]*2],
+ bp[5 + bp[2 + bp[1]*2]*2],
+ bp[4 + bp[2 + bp[1]*2]*2]);
}
- printk(KERN_INFO "%s: Index #%d - Media %s (#%d) described "
- "by a %s (%d) block.\n",
- dev->name, i, medianame[leaf->media & 15], leaf->media,
- leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
- leaf->type);
+ dev_info(&dev->dev,
+ "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+ i, medianame[leaf->media & 15], leaf->media,
+ leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+ leaf->type);
}
if (new_advertise)
tp->sym_advertise = new_advertise;
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 2e8e8ee893c..1faf7a4d720 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -125,12 +125,12 @@ int tulip_poll(struct napi_struct *napi, int budget)
#endif
if (tulip_debug > 4)
- printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
- tp->rx_ring[entry].status);
+ printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
+ entry, tp->rx_ring[entry].status);
do {
if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
- printk(KERN_DEBUG " In tulip_poll(), hardware disappeared.\n");
+ printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n");
break;
}
/* Acknowledge current RX interrupt sources. */
@@ -146,7 +146,7 @@ int tulip_poll(struct napi_struct *napi, int budget)
break;
if (tulip_debug > 5)
- printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
+ printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
dev->name, entry, status);
if (++work_done >= budget)
@@ -177,15 +177,15 @@ int tulip_poll(struct napi_struct *napi, int budget)
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (tulip_debug > 1)
- printk(KERN_WARNING "%s: Oversized Ethernet frame "
- "spanned multiple buffers, status %8.8x!\n",
- dev->name, status);
+ dev_warn(&dev->dev,
+ "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+ status);
tp->stats.rx_length_errors++;
}
} else {
/* There was a fatal error. */
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
+ printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
dev->name, status);
tp->stats.rx_errors++; /* end of a packet.*/
if (pkt_len > 1518 ||
@@ -226,12 +226,11 @@ int tulip_poll(struct napi_struct *napi, int budget)
#ifndef final_version
if (tp->rx_buffers[entry].mapping !=
le32_to_cpu(tp->rx_ring[entry].buffer1)) {
- printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
- "do not match in tulip_rx: %08x vs. %08llx %p / %p.\n",
- dev->name,
- le32_to_cpu(tp->rx_ring[entry].buffer1),
- (unsigned long long)tp->rx_buffers[entry].mapping,
- skb->head, temp);
+ dev_err(&dev->dev,
+ "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n",
+ le32_to_cpu(tp->rx_ring[entry].buffer1),
+ (unsigned long long)tp->rx_buffers[entry].mapping,
+ skb->head, temp);
}
#endif
@@ -365,16 +364,16 @@ static int tulip_rx(struct net_device *dev)
int received = 0;
if (tulip_debug > 4)
- printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
- tp->rx_ring[entry].status);
+ printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
+ entry, tp->rx_ring[entry].status);
/* If we own the next entry, it is a new packet. Send it up. */
while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
s32 status = le32_to_cpu(tp->rx_ring[entry].status);
short pkt_len;
if (tulip_debug > 5)
- printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
- dev->name, entry, status);
+ printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
+ dev->name, entry, status);
if (--rx_work_limit < 0)
break;
@@ -402,16 +401,16 @@ static int tulip_rx(struct net_device *dev)
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (tulip_debug > 1)
- printk(KERN_WARNING "%s: Oversized Ethernet frame "
- "spanned multiple buffers, status %8.8x!\n",
- dev->name, status);
+ dev_warn(&dev->dev,
+ "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+ status);
tp->stats.rx_length_errors++;
}
} else {
/* There was a fatal error. */
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
- dev->name, status);
+ printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
+ dev->name, status);
tp->stats.rx_errors++; /* end of a packet.*/
if (pkt_len > 1518 ||
(status & RxDescRunt))
@@ -450,12 +449,11 @@ static int tulip_rx(struct net_device *dev)
#ifndef final_version
if (tp->rx_buffers[entry].mapping !=
le32_to_cpu(tp->rx_ring[entry].buffer1)) {
- printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
- "do not match in tulip_rx: %08x vs. %Lx %p / %p.\n",
- dev->name,
- le32_to_cpu(tp->rx_ring[entry].buffer1),
- (long long)tp->rx_buffers[entry].mapping,
- skb->head, temp);
+ dev_err(&dev->dev,
+ "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n",
+ le32_to_cpu(tp->rx_ring[entry].buffer1),
+ (long long)tp->rx_buffers[entry].mapping,
+ skb->head, temp);
}
#endif
@@ -569,7 +567,7 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
#endif /* CONFIG_TULIP_NAPI */
if (tulip_debug > 4)
- printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n",
+ printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x\n",
dev->name, csr5, ioread32(ioaddr + CSR5));
@@ -601,8 +599,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
/* There was an major error, log it. */
#ifndef final_version
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
- dev->name, status);
+ printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
+ dev->name, status);
#endif
tp->stats.tx_errors++;
if (status & 0x4104) tp->stats.tx_aborted_errors++;
@@ -631,8 +629,9 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
#ifndef final_version
if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
- printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d.\n",
- dev->name, dirty_tx, tp->cur_tx);
+ dev_err(&dev->dev,
+ "Out-of-sync dirty pointer, %d vs. %d\n",
+ dirty_tx, tp->cur_tx);
dirty_tx += TX_RING_SIZE;
}
#endif
@@ -643,9 +642,10 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
tp->dirty_tx = dirty_tx;
if (csr5 & TxDied) {
if (tulip_debug > 2)
- printk(KERN_WARNING "%s: The transmitter stopped."
- " CSR5 is %x, CSR6 %x, new CSR6 %x.\n",
- dev->name, csr5, ioread32(ioaddr + CSR6), tp->csr6);
+ dev_warn(&dev->dev,
+ "The transmitter stopped. CSR5 is %x, CSR6 %x, new CSR6 %x\n",
+ csr5, ioread32(ioaddr + CSR6),
+ tp->csr6);
tulip_restart_rxtx(tp);
}
spin_unlock(&tp->lock);
@@ -696,8 +696,9 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
* to the 21142/3 docs that is).
* -- rmk
*/
- printk(KERN_ERR "%s: (%lu) System Error occurred (%d)\n",
- dev->name, tp->nir, error);
+ dev_err(&dev->dev,
+ "(%lu) System Error occurred (%d)\n",
+ tp->nir, error);
}
/* Clear all error sources, included undocumented ones! */
iowrite32(0x0800f7ba, ioaddr + CSR5);
@@ -706,16 +707,17 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
if (csr5 & TimerInt) {
if (tulip_debug > 2)
- printk(KERN_ERR "%s: Re-enabling interrupts, %8.8x.\n",
- dev->name, csr5);
+ dev_err(&dev->dev,
+ "Re-enabling interrupts, %08x\n",
+ csr5);
iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tp->ttimer = 0;
oi++;
}
if (tx > maxtx || rx > maxrx || oi > maxoi) {
if (tulip_debug > 1)
- printk(KERN_WARNING "%s: Too much work during an interrupt, "
- "csr5=0x%8.8x. (%lu) (%d,%d,%d)\n", dev->name, csr5, tp->nir, tx, rx, oi);
+ dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n",
+ csr5, tp->nir, tx, rx, oi);
/* Acknowledge all interrupt sources. */
iowrite32(0x8001ffff, ioaddr + CSR5);
@@ -764,14 +766,18 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
entry = tp->dirty_rx % RX_RING_SIZE;
if (tp->rx_buffers[entry].skb == NULL) {
if (tulip_debug > 1)
- printk(KERN_WARNING "%s: in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", dev->name, tp->nir, tp->cur_rx, tp->ttimer, rx);
+ dev_warn(&dev->dev,
+ "in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n",
+ tp->nir, tp->cur_rx, tp->ttimer, rx);
if (tp->chip_id == LC82C168) {
iowrite32(0x00, ioaddr + CSR7);
mod_timer(&tp->timer, RUN_AT(HZ/50));
} else {
if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) {
if (tulip_debug > 1)
- printk(KERN_WARNING "%s: in rx suspend mode: (%lu) set timer\n", dev->name, tp->nir);
+ dev_warn(&dev->dev,
+ "in rx suspend mode: (%lu) set timer\n",
+ tp->nir);
iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
ioaddr + CSR7);
iowrite32(TimerInt, ioaddr + CSR5);
@@ -787,8 +793,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
}
if (tulip_debug > 4)
- printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#4.4x.\n",
- dev->name, ioread32(ioaddr + CSR5));
+ printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n",
+ dev->name, ioread32(ioaddr + CSR5));
return IRQ_HANDLED;
}
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index d8fda83705b..68b170ae4d1 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -182,9 +182,8 @@ void tulip_select_media(struct net_device *dev, int startup)
switch (mleaf->type) {
case 0: /* 21140 non-MII xcvr. */
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver"
- " with control setting %2.2x.\n",
- dev->name, p[1]);
+ printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver with control setting %02x\n",
+ dev->name, p[1]);
dev->if_port = p[0];
if (startup)
iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
@@ -205,15 +204,15 @@ void tulip_select_media(struct net_device *dev, int startup)
struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
unsigned char *rst = rleaf->leafdata;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Resetting the transceiver.\n",
- dev->name);
+ printk(KERN_DEBUG "%s: Resetting the transceiver\n",
+ dev->name);
for (i = 0; i < rst[0]; i++)
iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control "
- "%4.4x/%4.4x.\n",
- dev->name, medianame[dev->if_port], setup[0], setup[1]);
+ printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control %04x/%04x\n",
+ dev->name, medianame[dev->if_port],
+ setup[0], setup[1]);
if (p[0] & 0x40) { /* SIA (CSR13-15) setup values are provided. */
csr13val = setup[0];
csr14val = setup[1];
@@ -240,8 +239,8 @@ void tulip_select_media(struct net_device *dev, int startup)
if (startup) iowrite32(csr13val, ioaddr + CSR13);
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Setting CSR15 to %8.8x/%8.8x.\n",
- dev->name, csr15dir, csr15val);
+ printk(KERN_DEBUG "%s: Setting CSR15 to %08x/%08x\n",
+ dev->name, csr15dir, csr15val);
if (mleaf->type == 4)
new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
else
@@ -317,8 +316,9 @@ void tulip_select_media(struct net_device *dev, int startup)
if (tp->mii_advertise == 0)
tp->mii_advertise = tp->advertising[phy_num];
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Advertising %4.4x on MII %d.\n",
- dev->name, tp->mii_advertise, tp->phys[phy_num]);
+ printk(KERN_DEBUG "%s: Advertising %04x on MII %d\n",
+ dev->name, tp->mii_advertise,
+ tp->phys[phy_num]);
tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
}
break;
@@ -335,8 +335,8 @@ void tulip_select_media(struct net_device *dev, int startup)
struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
unsigned char *rst = rleaf->leafdata;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Resetting the transceiver.\n",
- dev->name);
+ printk(KERN_DEBUG "%s: Resetting the transceiver\n",
+ dev->name);
for (i = 0; i < rst[0]; i++)
iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
}
@@ -344,20 +344,20 @@ void tulip_select_media(struct net_device *dev, int startup)
break;
}
default:
- printk(KERN_DEBUG "%s: Invalid media table selection %d.\n",
- dev->name, mleaf->type);
+ printk(KERN_DEBUG "%s: Invalid media table selection %d\n",
+ dev->name, mleaf->type);
new_csr6 = 0x020E0000;
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %2.2x.\n",
- dev->name, medianame[dev->if_port],
+ printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %02x\n",
+ dev->name, medianame[dev->if_port],
ioread32(ioaddr + CSR12) & 0xff);
} else if (tp->chip_id == LC82C168) {
if (startup && ! tp->medialock)
dev->if_port = tp->mii_cnt ? 11 : 0;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s.\n",
- dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]);
+ printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s\n",
+ dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]);
if (tp->mii_cnt) {
new_csr6 = 0x810C0000;
iowrite32(0x0001, ioaddr + CSR15);
@@ -388,10 +388,9 @@ void tulip_select_media(struct net_device *dev, int startup)
} else
new_csr6 = 0x03860000;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: No media description table, assuming "
- "%s transceiver, CSR12 %2.2x.\n",
- dev->name, medianame[dev->if_port],
- ioread32(ioaddr + CSR12));
+ printk(KERN_DEBUG "%s: No media description table, assuming %s transceiver, CSR12 %02x\n",
+ dev->name, medianame[dev->if_port],
+ ioread32(ioaddr + CSR12));
}
tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
@@ -415,16 +414,17 @@ int tulip_check_duplex(struct net_device *dev)
bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA);
if (tulip_debug > 1)
- printk(KERN_INFO "%s: MII status %4.4x, Link partner report "
- "%4.4x.\n", dev->name, bmsr, lpa);
+ dev_info(&dev->dev, "MII status %04x, Link partner report %04x\n",
+ bmsr, lpa);
if (bmsr == 0xffff)
return -2;
if ((bmsr & BMSR_LSTATUS) == 0) {
int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
if ((new_bmsr & BMSR_LSTATUS) == 0) {
if (tulip_debug > 1)
- printk(KERN_INFO "%s: No link beat on the MII interface,"
- " status %4.4x.\n", dev->name, new_bmsr);
+ dev_info(&dev->dev,
+ "No link beat on the MII interface, status %04x\n",
+ new_bmsr);
return -1;
}
}
@@ -443,10 +443,10 @@ int tulip_check_duplex(struct net_device *dev)
tulip_restart_rxtx(tp);
if (tulip_debug > 0)
- printk(KERN_INFO "%s: Setting %s-duplex based on MII"
- "#%d link partner capability of %4.4x.\n",
- dev->name, tp->full_duplex ? "full" : "half",
- tp->phys[0], lpa);
+ dev_info(&dev->dev,
+ "Setting %s-duplex based on MII#%d link partner capability of %04x\n",
+ tp->full_duplex ? "full" : "half",
+ tp->phys[0], lpa);
return 1;
}
@@ -501,15 +501,13 @@ void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
tp->phys[phy_idx++] = phy;
- printk (KERN_INFO "tulip%d: MII transceiver #%d "
- "config %4.4x status %4.4x advertising %4.4x.\n",
+ pr_info("tulip%d: MII transceiver #%d config %04x status %04x advertising %04x\n",
board_idx, phy, mii_reg0, mii_status, mii_advert);
/* Fixup for DLink with miswired PHY. */
if (mii_advert != to_advert) {
- printk (KERN_DEBUG "tulip%d: Advertising %4.4x on PHY %d,"
- " previously advertising %4.4x.\n",
- board_idx, to_advert, phy, mii_advert);
+ printk(KERN_DEBUG "tulip%d: Advertising %04x on PHY %d, previously advertising %04x\n",
+ board_idx, to_advert, phy, mii_advert);
tulip_mdio_write (dev, phy, 4, to_advert);
}
@@ -554,7 +552,7 @@ void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
}
tp->mii_cnt = phy_idx;
if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
- printk (KERN_INFO "tulip%d: ***WARNING***: No MII transceiver found!\n",
+ pr_info("tulip%d: ***WARNING***: No MII transceiver found!\n",
board_idx);
tp->phys[0] = 1;
}
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index d3253ed09df..966efa1a27d 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -40,8 +40,8 @@ void pnic_do_nway(struct net_device *dev)
new_csr6 |= 0x00000200;
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC autonegotiated status %8.8x, %s.\n",
- dev->name, phy_reg, medianame[dev->if_port]);
+ printk(KERN_DEBUG "%s: PNIC autonegotiated status %08x, %s\n",
+ dev->name, phy_reg, medianame[dev->if_port]);
if (tp->csr6 != new_csr6) {
tp->csr6 = new_csr6;
/* Restart Tx */
@@ -58,8 +58,8 @@ void pnic_lnk_change(struct net_device *dev, int csr5)
int phy_reg = ioread32(ioaddr + 0xB8);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC link changed state %8.8x, CSR5 %8.8x.\n",
- dev->name, phy_reg, csr5);
+ printk(KERN_DEBUG "%s: PNIC link changed state %08x, CSR5 %08x\n",
+ dev->name, phy_reg, csr5);
if (ioread32(ioaddr + CSR5) & TPLnkFail) {
iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7);
/* If we use an external MII, then we mustn't use the
@@ -114,9 +114,8 @@ void pnic_timer(unsigned long data)
int csr5 = ioread32(ioaddr + CSR5);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC timer PHY status %8.8x, %s "
- "CSR5 %8.8x.\n",
- dev->name, phy_reg, medianame[dev->if_port], csr5);
+ printk(KERN_DEBUG "%s: PNIC timer PHY status %08x, %s CSR5 %08x\n",
+ dev->name, phy_reg, medianame[dev->if_port], csr5);
if (phy_reg & 0x04000000) { /* Remote link fault */
iowrite32(0x0201F078, ioaddr + 0xB8);
next_tick = 1*HZ;
@@ -126,10 +125,11 @@ void pnic_timer(unsigned long data)
next_tick = 60*HZ;
} else if (csr5 & TPLnkFail) { /* 100baseTx link beat */
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %4.4x, "
- "CSR5 %8.8x, PHY %3.3x.\n",
- dev->name, medianame[dev->if_port], csr12,
- ioread32(ioaddr + CSR5), ioread32(ioaddr + 0xB8));
+ printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n",
+ dev->name, medianame[dev->if_port],
+ csr12,
+ ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + 0xB8));
next_tick = 3*HZ;
if (tp->medialock) {
} else if (tp->nwayset && (dev->if_port & 1)) {
@@ -151,10 +151,11 @@ void pnic_timer(unsigned long data)
tulip_restart_rxtx(tp);
dev->trans_start = jiffies;
if (tulip_debug > 1)
- printk(KERN_INFO "%s: Changing PNIC configuration to %s "
- "%s-duplex, CSR6 %8.8x.\n",
- dev->name, medianame[dev->if_port],
- tp->full_duplex ? "full" : "half", new_csr6);
+ dev_info(&dev->dev,
+ "Changing PNIC configuration to %s %s-duplex, CSR6 %08x\n",
+ medianame[dev->if_port],
+ tp->full_duplex ? "full" : "half",
+ new_csr6);
}
}
}
@@ -162,7 +163,7 @@ too_good_connection:
mod_timer(&tp->timer, RUN_AT(next_tick));
if(!ioread32(ioaddr + CSR7)) {
if (tulip_debug > 1)
- printk(KERN_INFO "%s: sw timer wakeup.\n", dev->name);
+ dev_info(&dev->dev, "sw timer wakeup\n");
disable_irq(dev->irq);
tulip_refill_rx(dev);
enable_irq(dev->irq);
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index d8418694bf4..b8197666021 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -87,8 +87,8 @@ void pnic2_timer(unsigned long data)
int next_tick = 60*HZ;
if (tulip_debug > 3)
- printk(KERN_INFO"%s: PNIC2 negotiation status %8.8x.\n",
- dev->name,ioread32(ioaddr + CSR12));
+ dev_info(&dev->dev, "PNIC2 negotiation status %08x\n",
+ ioread32(ioaddr + CSR12));
if (next_tick) {
mod_timer(&tp->timer, RUN_AT(next_tick));
@@ -125,8 +125,8 @@ void pnic2_start_nway(struct net_device *dev)
csr14 |= 0x00001184;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, "
- "csr14=%8.8x.\n", dev->name, csr14);
+ printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, csr14=%08x\n",
+ dev->name, csr14);
/* tell pnic2_lnk_change we are doing an nway negotiation */
dev->if_port = 0;
@@ -137,8 +137,8 @@ void pnic2_start_nway(struct net_device *dev)
tp->csr6 = ioread32(ioaddr + CSR6);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: On Entry to Nway, "
- "csr6=%8.8x.\n", dev->name, tp->csr6);
+ printk(KERN_DEBUG "%s: On Entry to Nway, csr6=%08x\n",
+ dev->name, tp->csr6);
/* mask off any bits not to touch
* comment at top of file explains mask value
@@ -181,9 +181,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
int csr12 = ioread32(ioaddr + CSR12);
if (tulip_debug > 1)
- printk(KERN_INFO"%s: PNIC2 link status interrupt %8.8x, "
- " CSR5 %x, %8.8x.\n", dev->name, csr12,
- csr5, ioread32(ioaddr + CSR14));
+ dev_info(&dev->dev,
+ "PNIC2 link status interrupt %08x, CSR5 %x, %08x\n",
+ csr12, csr5, ioread32(ioaddr + CSR14));
/* If NWay finished and we have a negotiated partner capability.
* check bits 14:12 for bit pattern 101 - all is good
@@ -215,9 +215,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
else if (negotiated & 0x0020) dev->if_port = 0;
else {
if (tulip_debug > 1)
- printk(KERN_INFO "%s: funny autonegotiate result "
- "csr12 %8.8x advertising %4.4x\n",
- dev->name, csr12, tp->sym_advertise);
+ dev_info(&dev->dev,
+ "funny autonegotiate result csr12 %08x advertising %04x\n",
+ csr12, tp->sym_advertise);
tp->nwayset = 0;
/* so check if 100baseTx link state is okay */
if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180))
@@ -231,10 +231,11 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
if (tulip_debug > 1) {
if (tp->nwayset)
- printk(KERN_INFO "%s: Switching to %s based on link "
- "negotiation %4.4x & %4.4x = %4.4x.\n",
- dev->name, medianame[dev->if_port],
- tp->sym_advertise, tp->lpar, negotiated);
+ dev_info(&dev->dev,
+ "Switching to %s based on link negotiation %04x & %04x = %04x\n",
+ medianame[dev->if_port],
+ tp->sym_advertise, tp->lpar,
+ negotiated);
}
/* remember to turn off bit 7 - autonegotiate
@@ -270,9 +271,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
iowrite32(1, ioaddr + CSR13);
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Setting CSR6 %8.8x/%x CSR12 "
- "%8.8x.\n", dev->name, tp->csr6,
- ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12));
+ printk(KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n",
+ dev->name, tp->csr6,
+ ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12));
/* now the following actually writes out the
* new csr6 values
@@ -282,9 +283,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
return;
} else {
- printk(KERN_INFO "%s: Autonegotiation failed, "
- "using %s, link beat status %4.4x.\n",
- dev->name, medianame[dev->if_port], csr12);
+ dev_info(&dev->dev,
+ "Autonegotiation failed, using %s, link beat status %04x\n",
+ medianame[dev->if_port], csr12);
/* remember to turn off bit 7 - autonegotiate
* enable so we don't forget
@@ -339,9 +340,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
/* we are at 100mb and a potential link change occurred */
if (tulip_debug > 1)
- printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n",
- dev->name, medianame[dev->if_port],
- (csr12 & 2) ? "failed" : "good");
+ dev_info(&dev->dev, "PNIC2 %s link beat %s\n",
+ medianame[dev->if_port],
+ (csr12 & 2) ? "failed" : "good");
/* check 100 link beat */
@@ -364,9 +365,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
/* we are at 10mb and a potential link change occurred */
if (tulip_debug > 1)
- printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n",
- dev->name, medianame[dev->if_port],
- (csr12 & 4) ? "failed" : "good");
+ dev_info(&dev->dev, "PNIC2 %s link beat %s\n",
+ medianame[dev->if_port],
+ (csr12 & 4) ? "failed" : "good");
tp->nway = 0;
@@ -385,7 +386,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
if (tulip_debug > 1)
- printk(KERN_INFO"%s: PNIC2 Link Change Default?\n",dev->name);
+ dev_info(&dev->dev, "PNIC2 Link Change Default?\n");
/* if all else fails default to trying 10baseT-HD */
dev->if_port = 0;
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index a0e08422308..36c2725ec88 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -28,11 +28,11 @@ void tulip_media_task(struct work_struct *work)
unsigned long flags;
if (tulip_debug > 2) {
- printk(KERN_DEBUG "%s: Media selection tick, %s, status %8.8x mode"
- " %8.8x SIA %8.8x %8.8x %8.8x %8.8x.\n",
- dev->name, medianame[dev->if_port], ioread32(ioaddr + CSR5),
- ioread32(ioaddr + CSR6), csr12, ioread32(ioaddr + CSR13),
- ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+ printk(KERN_DEBUG "%s: Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
+ dev->name, medianame[dev->if_port],
+ ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
+ csr12, ioread32(ioaddr + CSR13),
+ ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
}
switch (tp->chip_id) {
case DC21140:
@@ -48,9 +48,9 @@ void tulip_media_task(struct work_struct *work)
Assume this a generic MII or SYM transceiver. */
next_tick = 60*HZ;
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: network media monitor CSR6 %8.8x "
- "CSR12 0x%2.2x.\n",
- dev->name, ioread32(ioaddr + CSR6), csr12 & 0xff);
+ printk(KERN_DEBUG "%s: network media monitor CSR6 %08x CSR12 0x%02x\n",
+ dev->name,
+ ioread32(ioaddr + CSR6), csr12 & 0xff);
break;
}
mleaf = &tp->mtable->mleaf[tp->cur_index];
@@ -62,9 +62,8 @@ void tulip_media_task(struct work_struct *work)
s8 bitnum = p[offset];
if (p[offset+1] & 0x80) {
if (tulip_debug > 1)
- printk(KERN_DEBUG"%s: Transceiver monitor tick "
- "CSR12=%#2.2x, no media sense.\n",
- dev->name, csr12);
+ printk(KERN_DEBUG "%s: Transceiver monitor tick CSR12=%#02x, no media sense\n",
+ dev->name, csr12);
if (mleaf->type == 4) {
if (mleaf->media == 3 && (csr12 & 0x02))
goto select_next_media;
@@ -72,16 +71,16 @@ void tulip_media_task(struct work_struct *work)
break;
}
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#2.2x"
- " bit %d is %d, expecting %d.\n",
- dev->name, csr12, (bitnum >> 1) & 7,
- (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
- (bitnum >= 0));
+ printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
+ dev->name, csr12, (bitnum >> 1) & 7,
+ (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
+ (bitnum >= 0));
/* Check that the specified bit has the proper value. */
if ((bitnum < 0) !=
((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Link beat detected for %s.\n", dev->name,
+ printk(KERN_DEBUG "%s: Link beat detected for %s\n",
+ dev->name,
medianame[mleaf->media & MEDIA_MASK]);
if ((p[2] & 0x61) == 0x01) /* Bogus Znyx board. */
goto actually_mii;
@@ -100,9 +99,9 @@ void tulip_media_task(struct work_struct *work)
if (tulip_media_cap[dev->if_port] & MediaIsFD)
goto select_next_media; /* Skip FD entries. */
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: No link beat on media %s,"
- " trying transceiver type %s.\n",
- dev->name, medianame[mleaf->media & MEDIA_MASK],
+ printk(KERN_DEBUG "%s: No link beat on media %s, trying transceiver type %s\n",
+ dev->name,
+ medianame[mleaf->media & MEDIA_MASK],
medianame[tp->mtable->mleaf[tp->cur_index].media]);
tulip_select_media(dev, 0);
/* Restart the transmit process. */
@@ -151,8 +150,8 @@ void mxic_timer(unsigned long data)
int next_tick = 60*HZ;
if (tulip_debug > 3) {
- printk(KERN_INFO"%s: MXIC negotiation status %8.8x.\n", dev->name,
- ioread32(ioaddr + CSR12));
+ dev_info(&dev->dev, "MXIC negotiation status %08x\n",
+ ioread32(ioaddr + CSR12));
}
if (next_tick) {
mod_timer(&tp->timer, RUN_AT(next_tick));
@@ -167,11 +166,10 @@ void comet_timer(unsigned long data)
int next_tick = 60*HZ;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Comet link status %4.4x partner capability "
- "%4.4x.\n",
- dev->name,
- tulip_mdio_read(dev, tp->phys[0], 1),
- tulip_mdio_read(dev, tp->phys[0], 5));
+ printk(KERN_DEBUG "%s: Comet link status %04x partner capability %04x\n",
+ dev->name,
+ tulip_mdio_read(dev, tp->phys[0], 1),
+ tulip_mdio_read(dev, tp->phys[0], 5));
/* mod_timer synchronizes us with potential add_timer calls
* from interrupts.
*/
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 20696b5d60a..7f544ef2f5f 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -41,7 +41,6 @@
static char version[] __devinitdata =
"Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
-
/* A few user-configurable values. */
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
@@ -211,7 +210,7 @@ struct tulip_chip_table tulip_tbl[] = {
};
-static struct pci_device_id tulip_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(tulip_pci_tbl) = {
{ 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
{ 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 },
{ 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 },
@@ -326,7 +325,8 @@ static void tulip_up(struct net_device *dev)
udelay(100);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq);
+ printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
+ dev->name, dev->irq);
iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
@@ -387,8 +387,9 @@ static void tulip_up(struct net_device *dev)
(dev->if_port == 12 ? 0 : dev->if_port);
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == looking_for) {
- printk(KERN_INFO "%s: Using user-specified media %s.\n",
- dev->name, medianame[dev->if_port]);
+ dev_info(&dev->dev,
+ "Using user-specified media %s\n",
+ medianame[dev->if_port]);
goto media_picked;
}
}
@@ -396,8 +397,9 @@ static void tulip_up(struct net_device *dev)
int looking_for = tp->mtable->defaultmedia & MEDIA_MASK;
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == looking_for) {
- printk(KERN_INFO "%s: Using EEPROM-set media %s.\n",
- dev->name, medianame[looking_for]);
+ dev_info(&dev->dev,
+ "Using EEPROM-set media %s\n",
+ medianame[looking_for]);
goto media_picked;
}
}
@@ -424,9 +426,10 @@ media_picked:
if (tp->mii_cnt) {
tulip_select_media(dev, 1);
if (tulip_debug > 1)
- printk(KERN_INFO "%s: Using MII transceiver %d, status "
- "%4.4x.\n",
- dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1));
+ dev_info(&dev->dev,
+ "Using MII transceiver %d, status %04x\n",
+ tp->phys[0],
+ tulip_mdio_read(dev, tp->phys[0], 1));
iowrite32(csr6_mask_defstate, ioaddr + CSR6);
tp->csr6 = csr6_mask_hdcap;
dev->if_port = 11;
@@ -490,9 +493,10 @@ media_picked:
iowrite32(0, ioaddr + CSR2); /* Rx poll demand */
if (tulip_debug > 2) {
- printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n",
- dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5),
- ioread32(ioaddr + CSR6));
+ printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
+ dev->name, ioread32(ioaddr + CSR0),
+ ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + CSR6));
}
/* Set the timer to switch to check for link beat and perhaps switch
@@ -540,27 +544,30 @@ static void tulip_tx_timeout(struct net_device *dev)
if (tulip_media_cap[dev->if_port] & MediaIsMII) {
/* Do nothing -- the media monitor should handle this. */
if (tulip_debug > 1)
- printk(KERN_WARNING "%s: Transmit timeout using MII device.\n",
- dev->name);
+ dev_warn(&dev->dev,
+ "Transmit timeout using MII device\n");
} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 ||
tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 ||
tp->chip_id == DM910X) {
- printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
- "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
- dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
- ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+ dev_warn(&dev->dev,
+ "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n",
+ ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
+ ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14),
+ ioread32(ioaddr + CSR15));
tp->timeout_recovery = 1;
schedule_work(&tp->media_work);
goto out_unlock;
} else if (tp->chip_id == PNIC2) {
- printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, "
- "CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n",
- dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6),
- (int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12));
+ dev_warn(&dev->dev,
+ "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n",
+ (int)ioread32(ioaddr + CSR5),
+ (int)ioread32(ioaddr + CSR6),
+ (int)ioread32(ioaddr + CSR7),
+ (int)ioread32(ioaddr + CSR12));
} else {
- printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 "
- "%8.8x, resetting...\n",
- dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
+ dev_warn(&dev->dev,
+ "Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
+ ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
dev->if_port = 0;
}
@@ -570,26 +577,26 @@ static void tulip_tx_timeout(struct net_device *dev)
for (i = 0; i < RX_RING_SIZE; i++) {
u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
int j;
- printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x "
- "%2.2x %2.2x %2.2x.\n",
- i, (unsigned int)tp->rx_ring[i].status,
- (unsigned int)tp->rx_ring[i].length,
- (unsigned int)tp->rx_ring[i].buffer1,
- (unsigned int)tp->rx_ring[i].buffer2,
- buf[0], buf[1], buf[2]);
+ printk(KERN_DEBUG
+ "%2d: %08x %08x %08x %08x %02x %02x %02x\n",
+ i,
+ (unsigned int)tp->rx_ring[i].status,
+ (unsigned int)tp->rx_ring[i].length,
+ (unsigned int)tp->rx_ring[i].buffer1,
+ (unsigned int)tp->rx_ring[i].buffer2,
+ buf[0], buf[1], buf[2]);
for (j = 0; buf[j] != 0xee && j < 1600; j++)
if (j < 100)
- printk(KERN_CONT " %2.2x", buf[j]);
- printk(KERN_CONT " j=%d.\n", j);
+ pr_cont(" %02x", buf[j]);
+ pr_cont(" j=%d\n", j);
}
- printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring);
+ printk(KERN_DEBUG " Rx ring %08x: ", (int)tp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(KERN_CONT " %8.8x",
- (unsigned int)tp->rx_ring[i].status);
- printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
+ pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status);
+ printk(KERN_DEBUG " Tx ring %08x: ", (int)tp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
- printk(KERN_CONT "\n");
+ pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status);
+ pr_cont("\n");
}
#endif
@@ -832,8 +839,9 @@ static int tulip_close (struct net_device *dev)
tulip_down (dev);
if (tulip_debug > 1)
- printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
- dev->name, ioread32 (ioaddr + CSR5));
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "Shutting down ethercard, status was %02x\n",
+ ioread32 (ioaddr + CSR5));
free_irq (dev->irq, dev);
@@ -989,12 +997,10 @@ static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
memset(hash_table, 0, sizeof(hash_table));
set_bit_le(255, hash_table); /* Broadcast entry */
/* This should work on big-endian machines as well. */
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
set_bit_le(index, hash_table);
-
}
for (i = 0; i < 32; i++) {
*setup_frm++ = hash_table[i];
@@ -1013,20 +1019,18 @@ static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
struct dev_mc_list *mclist;
- int i;
u16 *eaddrs;
/* We have <= 14 addresses so we can use the wonderful
16 address perfect filtering of the Tulip. */
- for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
eaddrs = (u16 *)mclist->dmi_addr;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
}
/* Fill the unused entries with the broadcast address. */
- memset(setup_frm, 0xff, (15-i)*12);
+ memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12);
setup_frm = &tp->setup_frame[15*6];
/* Fill the final entry with our physical address. */
@@ -1049,7 +1053,8 @@ static void set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
tp->csr6 |= AcceptAllMulticast | AcceptAllPhys;
csr6 |= AcceptAllMulticast | AcceptAllPhys;
- } else if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) {
+ } else if ((netdev_mc_count(dev) > 1000) ||
+ (dev->flags & IFF_ALLMULTI)) {
/* Too many to filter well -- accept all multicasts. */
tp->csr6 |= AcceptAllMulticast;
csr6 |= AcceptAllMulticast;
@@ -1057,15 +1062,14 @@ static void set_rx_mode(struct net_device *dev)
/* Some work-alikes have only a 64-entry hash filter table. */
/* Should verify correctness on big-endian/__powerpc__ */
struct dev_mc_list *mclist;
- int i;
- if (dev->mc_count > 64) { /* Arbitrary non-effective limit. */
+ if (netdev_mc_count(dev) > 64) {
+ /* Arbitrary non-effective limit. */
tp->csr6 |= AcceptAllMulticast;
csr6 |= AcceptAllMulticast;
} else {
u32 mc_filter[2] = {0, 0}; /* Multicast hash filter */
int filterbit;
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
if (tp->flags & COMET_MAC_ADDR)
filterbit = ether_crc_le(ETH_ALEN, mclist->dmi_addr);
else
@@ -1073,10 +1077,10 @@ static void set_rx_mode(struct net_device *dev)
filterbit &= 0x3f;
mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
if (tulip_debug > 2)
- printk(KERN_INFO "%s: Added filter for %pM"
- " %8.8x bit %d.\n",
- dev->name, mclist->dmi_addr,
- ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
+ dev_info(&dev->dev,
+ "Added filter for %pM %08x bit %d\n",
+ mclist->dmi_addr,
+ ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
}
if (mc_filter[0] == tp->mc_filter[0] &&
mc_filter[1] == tp->mc_filter[1])
@@ -1099,7 +1103,8 @@ static void set_rx_mode(struct net_device *dev)
/* Note that only the low-address shortword of setup_frame is valid!
The values are doubled for big-endian architectures. */
- if (dev->mc_count > 14) { /* Must use a multicast hash table. */
+ if (netdev_mc_count(dev) > 14) {
+ /* Must use a multicast hash table. */
build_setup_frame_hash(tp->setup_frame, dev);
tx_flags = 0x08400000 | 192;
} else {
@@ -1288,9 +1293,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
unsigned int force_csr0 = 0;
#ifndef MODULE
- static int did_version; /* Already printed version info. */
- if (tulip_debug > 0 && did_version++ == 0)
- printk (KERN_INFO "%s", version);
+ if (tulip_debug > 0)
+ printk_once(KERN_INFO "%s", version);
#endif
board_idx++;
@@ -1301,7 +1305,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
*/
if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
- printk (KERN_ERR PFX "skipping LMC card.\n");
+ pr_err(PFX "skipping LMC card\n");
return -ENODEV;
}
@@ -1317,15 +1321,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
pdev->revision < 0x30) {
- printk(KERN_INFO PFX
- "skipping early DM9100 with Crc bug (use dmfe)\n");
+ pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
}
dp = pci_device_to_OF_node(pdev);
if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
- printk(KERN_INFO PFX
- "skipping DM910x expansion card (use dmfe)\n");
+ pr_info(PFX "skipping DM910x expansion card (use dmfe)\n");
return -ENODEV;
}
}
@@ -1372,9 +1374,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
i = pci_enable_device(pdev);
if (i) {
- printk (KERN_ERR PFX
- "Cannot enable tulip board #%d, aborting\n",
- board_idx);
+ pr_err(PFX "Cannot enable tulip board #%d, aborting\n",
+ board_idx);
return i;
}
@@ -1383,22 +1384,22 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
/* alloc_etherdev ensures aligned and zeroed private structures */
dev = alloc_etherdev (sizeof (*tp));
if (!dev) {
- printk (KERN_ERR PFX "ether device alloc failed, aborting\n");
+ pr_err(PFX "ether device alloc failed, aborting\n");
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
- printk (KERN_ERR PFX "%s: I/O region (0x%llx@0x%llx) too small, "
- "aborting\n", pci_name(pdev),
- (unsigned long long)pci_resource_len (pdev, 0),
- (unsigned long long)pci_resource_start (pdev, 0));
+ pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
+ pci_name(pdev),
+ (unsigned long long)pci_resource_len (pdev, 0),
+ (unsigned long long)pci_resource_start (pdev, 0));
goto err_out_free_netdev;
}
/* grab all resources from both PIO and MMIO regions, as we
* don't want anyone else messing around with our hardware */
- if (pci_request_regions (pdev, "tulip"))
+ if (pci_request_regions (pdev, DRV_NAME))
goto err_out_free_netdev;
ioaddr = pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size);
@@ -1611,8 +1612,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (dev->mem_start & MEDIA_MASK)
tp->default_port = dev->mem_start & MEDIA_MASK;
if (tp->default_port) {
- printk(KERN_INFO "tulip%d: Transceiver selection forced to %s.\n",
- board_idx, medianame[tp->default_port & MEDIA_MASK]);
+ pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n",
+ board_idx, medianame[tp->default_port & MEDIA_MASK]);
tp->medialock = 1;
if (tulip_media_cap[tp->default_port] & MediaAlwaysFD)
tp->full_duplex = 1;
@@ -1627,7 +1628,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
}
if (tp->flags & HAS_MEDIA_TABLE) {
- sprintf(dev->name, "tulip%d", board_idx); /* hack */
+ sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
tulip_parse_eeprom(dev);
strcpy(dev->name, "eth%d"); /* un-hack */
}
@@ -1663,20 +1664,18 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (register_netdev(dev))
goto err_out_free_ring;
- printk(KERN_INFO "%s: %s rev %d at "
+ pci_set_drvdata(pdev, dev);
+
+ dev_info(&dev->dev,
#ifdef CONFIG_TULIP_MMIO
- "MMIO"
+ "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n",
#else
- "Port"
+ "%s rev %d at Port %#llx,%s %pM, IRQ %d\n",
#endif
- " %#llx,", dev->name, chip_name, pdev->revision,
- (unsigned long long) pci_resource_start(pdev, TULIP_BAR));
- pci_set_drvdata(pdev, dev);
-
- if (eeprom_missing)
- printk(" EEPROM not present,");
- printk(" %pM", dev->dev_addr);
- printk(", IRQ %d.\n", irq);
+ chip_name, pdev->revision,
+ (unsigned long long)pci_resource_start(pdev, TULIP_BAR),
+ eeprom_missing ? " EEPROM not present," : "",
+ dev->dev_addr, irq);
if (tp->chip_id == PNIC2)
tp->link_change = pnic2_lnk_change;
@@ -1799,12 +1798,12 @@ static int tulip_resume(struct pci_dev *pdev)
return 0;
if ((retval = pci_enable_device(pdev))) {
- printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
+ pr_err(PFX "pci_enable_device failed in resume\n");
return retval;
}
if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
- printk (KERN_ERR "tulip: request_irq failed in resume\n");
+ pr_err(PFX "request_irq failed in resume\n");
return retval;
}
@@ -1874,7 +1873,7 @@ static struct pci_driver tulip_driver = {
static int __init tulip_init (void)
{
#ifdef MODULE
- printk (KERN_INFO "%s", version);
+ pr_info("%s", version);
#endif
/* copy module parms into globals */
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index fa019cabc35..0ab05af237e 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -12,6 +12,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "uli526x"
#define DRV_VERSION "0.9.3"
#define DRV_RELDATE "2005-7-29"
@@ -82,9 +84,16 @@
#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
-#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+#define ULI526X_DBUG(dbug_now, msg, value) \
+do { \
+ if (uli526x_debug || (dbug_now)) \
+ pr_err("%s %lx\n", (msg), (long) (value)); \
+} while (0)
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode) \
+ pr_err("Change Speed to %sMhz %s duplex\n", \
+ mode & 1 ? "100" : "10", \
+ mode & 4 ? "full" : "half");
/* CR9 definition: SROM/MII */
@@ -284,7 +293,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ pr_warning("32-bit PCI DMA not available\n");
err = -ENODEV;
goto err_out_free;
}
@@ -295,19 +304,19 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
goto err_out_free;
if (!pci_resource_start(pdev, 0)) {
- printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ pr_err("I/O base is zero\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
- printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ pr_err("Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_request_regions(pdev, DRV_NAME)) {
- printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ pr_err("Failed to request PCI regions\n");
err = -ENODEV;
goto err_out_disable;
}
@@ -382,9 +391,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
if (err)
goto err_out_res;
- printk(KERN_INFO "%s: ULi M%04lx at pci%s, %pM, irq %d.\n",
- dev->name,ent->driver_data >> 16,pci_name(pdev),
- dev->dev_addr, dev->irq);
+ dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
+ ent->driver_data >> 16, pci_name(pdev),
+ dev->dev_addr, dev->irq);
pci_set_master(pdev);
@@ -516,7 +525,7 @@ static void uli526x_init(struct net_device *dev)
}
}
if(phy_tmp == 32)
- printk(KERN_WARNING "Can not find the phy address!!!");
+ pr_warning("Can not find the phy address!!!");
/* Parser SROM and media mode */
db->media_mode = uli526x_media_mode;
@@ -548,7 +557,7 @@ static void uli526x_init(struct net_device *dev)
update_cr6(db->cr6_data, ioaddr);
/* Send setup frame */
- send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
+ send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */
/* Init CR7, interrupt active bit */
db->cr7_data = CR7_DEFAULT;
@@ -582,7 +591,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
- printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+ pr_err("big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -592,7 +601,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
/* No Tx resource check, it never happen nromally */
if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
- printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
+ pr_err("No Tx resource %ld\n", db->tx_packet_cnt);
return NETDEV_TX_BUSY;
}
@@ -897,16 +906,18 @@ static void uli526x_set_filter_mode(struct net_device * dev)
return;
}
- if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
- ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
+ if (dev->flags & IFF_ALLMULTI ||
+ netdev_mc_count(dev) > ULI5261_MAX_MULTICAST) {
+ ULI526X_DBUG(0, "Pass all multicast address",
+ netdev_mc_count(dev));
db->cr6_data &= ~(CR6_PM | CR6_PBF);
db->cr6_data |= CR6_PAM;
spin_unlock_irqrestore(&db->lock, flags);
return;
}
- ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
- send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
+ ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev));
+ send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */
spin_unlock_irqrestore(&db->lock, flags);
}
@@ -1058,7 +1069,7 @@ static void uli526x_timer(unsigned long data)
/* Link Failed */
ULI526X_DBUG(0, "Link Failed", tmp_cr12);
netif_carrier_off(dev);
- printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ pr_info("%s NIC Link is Down\n",dev->name);
db->link_failed = 1;
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
@@ -1090,11 +1101,11 @@ static void uli526x_timer(unsigned long data)
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
- printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
+ pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
}
else
{
- printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
+ pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
}
netif_carrier_on(dev);
}
@@ -1104,7 +1115,7 @@ static void uli526x_timer(unsigned long data)
{
if(db->init==1)
{
- printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ pr_info("%s NIC Link is Down\n",dev->name);
netif_carrier_off(dev);
}
}
@@ -1230,8 +1241,7 @@ static int uli526x_resume(struct pci_dev *pdev)
err = pci_set_power_state(pdev, PCI_D0);
if (err) {
- printk(KERN_WARNING "%s: Could not put device into D0\n",
- dev->name);
+ dev_warn(&dev->dev, "Could not put device into D0\n");
return err;
}
@@ -1405,14 +1415,14 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
*suptr++ = 0xffff << FLT_SHIFT;
/* fit the multicast address */
- for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ netdev_for_each_mc_addr(mcptr, dev) {
addrptr = (u16 *) mcptr->dmi_addr;
*suptr++ = addrptr[0] << FLT_SHIFT;
*suptr++ = addrptr[1] << FLT_SHIFT;
*suptr++ = addrptr[2] << FLT_SHIFT;
}
- for (; i<14; i++) {
+ for (i = netdev_mc_count(dev); i < 14; i++) {
*suptr++ = 0xffff << FLT_SHIFT;
*suptr++ = 0xffff << FLT_SHIFT;
*suptr++ = 0xffff << FLT_SHIFT;
@@ -1432,7 +1442,7 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
update_cr6(db->cr6_data, dev->base_addr);
dev->trans_start = jiffies;
} else
- printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
+ pr_err("No Tx resource - Send_filter_frame!\n");
}
@@ -1783,7 +1793,7 @@ static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
}
-static struct pci_device_id uli526x_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(uli526x_pci_tbl) = {
{ 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
{ 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
{ 0, }
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 869a7a0005f..304f43866c4 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -218,7 +218,7 @@ enum chip_capability_flags {
CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,
};
-static const struct pci_device_id w840_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(w840_pci_tbl) = {
{ 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 },
{ 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
{ 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
@@ -376,8 +376,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
irq = pdev->irq;
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING "Winbond-840: Device %s disabled due to DMA limitations.\n",
- pci_name(pdev));
+ pr_warning("Winbond-840: Device %s disabled due to DMA limitations\n",
+ pci_name(pdev));
return -EIO;
}
dev = alloc_etherdev(sizeof(*np));
@@ -422,8 +422,9 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
if (option & 0x200)
np->mii_if.full_duplex = 1;
if (option & 15)
- printk(KERN_INFO "%s: ignoring user supplied media type %d",
- dev->name, option & 15);
+ dev_info(&dev->dev,
+ "ignoring user supplied media type %d",
+ option & 15);
}
if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0)
np->mii_if.full_duplex = 1;
@@ -440,9 +441,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
if (i)
goto err_out_cleardev;
- printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n",
- dev->name, pci_id_tbl[chip_idx].name, ioaddr,
- dev->dev_addr, irq);
+ dev_info(&dev->dev, "%s at %p, %pM, IRQ %d\n",
+ pci_id_tbl[chip_idx].name, ioaddr, dev->dev_addr, irq);
if (np->drv_flags & CanHaveMII) {
int phy, phy_idx = 0;
@@ -453,16 +453,17 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+
mdio_read(dev, phy, MII_PHYSID2);
- printk(KERN_INFO "%s: MII PHY %8.8xh found at address %d, status "
- "0x%4.4x advertising %4.4x.\n",
- dev->name, np->mii, phy, mii_status, np->mii_if.advertising);
+ dev_info(&dev->dev,
+ "MII PHY %08xh found at address %d, status 0x%04x advertising %04x\n",
+ np->mii, phy, mii_status,
+ np->mii_if.advertising);
}
}
np->mii_cnt = phy_idx;
np->mii_if.phy_id = np->phys[0];
if (phy_idx == 0) {
- printk(KERN_WARNING "%s: MII PHY not found -- this device may "
- "not operate correctly.\n", dev->name);
+ dev_warn(&dev->dev,
+ "MII PHY not found -- this device may not operate correctly\n");
}
}
@@ -644,8 +645,8 @@ static int netdev_open(struct net_device *dev)
goto out_err;
if (debug > 1)
- printk(KERN_DEBUG "%s: w89c840_open() irq %d.\n",
- dev->name, dev->irq);
+ printk(KERN_DEBUG "%s: w89c840_open() irq %d\n",
+ dev->name, dev->irq);
if((i=alloc_ringdesc(dev)))
goto out_err;
@@ -657,7 +658,7 @@ static int netdev_open(struct net_device *dev)
netif_start_queue(dev);
if (debug > 2)
- printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
+ printk(KERN_DEBUG "%s: Done netdev_open()\n", dev->name);
/* Set the timer to check for link beat. */
init_timer(&np->timer);
@@ -688,16 +689,18 @@ static int update_link(struct net_device *dev)
if (!(mii_reg & 0x4)) {
if (netif_carrier_ok(dev)) {
if (debug)
- printk(KERN_INFO "%s: MII #%d reports no link. Disabling watchdog.\n",
- dev->name, np->phys[0]);
+ dev_info(&dev->dev,
+ "MII #%d reports no link. Disabling watchdog\n",
+ np->phys[0]);
netif_carrier_off(dev);
}
return np->csr6;
}
if (!netif_carrier_ok(dev)) {
if (debug)
- printk(KERN_INFO "%s: MII #%d link is back. Enabling watchdog.\n",
- dev->name, np->phys[0]);
+ dev_info(&dev->dev,
+ "MII #%d link is back. Enabling watchdog\n",
+ np->phys[0]);
netif_carrier_on(dev);
}
@@ -729,9 +732,10 @@ static int update_link(struct net_device *dev)
if (fasteth)
result |= 0x20000000;
if (result != np->csr6 && debug)
- printk(KERN_INFO "%s: Setting %dMBit-%s-duplex based on MII#%d\n",
- dev->name, fasteth ? 100 : 10,
- duplex ? "full" : "half", np->phys[0]);
+ dev_info(&dev->dev,
+ "Setting %dMBit-%s-duplex based on MII#%d\n",
+ fasteth ? 100 : 10, duplex ? "full" : "half",
+ np->phys[0]);
return result;
}
@@ -763,8 +767,8 @@ static inline void update_csr6(struct net_device *dev, int new)
limit--;
if(!limit) {
- printk(KERN_INFO "%s: couldn't stop rxtx, IntrStatus %xh.\n",
- dev->name, csr5);
+ dev_info(&dev->dev,
+ "couldn't stop rxtx, IntrStatus %xh\n", csr5);
break;
}
udelay(1);
@@ -783,10 +787,9 @@ static void netdev_timer(unsigned long data)
void __iomem *ioaddr = np->base_addr;
if (debug > 2)
- printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x "
- "config %8.8x.\n",
- dev->name, ioread32(ioaddr + IntrStatus),
- ioread32(ioaddr + NetworkConfig));
+ printk(KERN_DEBUG "%s: Media selection timer tick, status %08x config %08x\n",
+ dev->name, ioread32(ioaddr + IntrStatus),
+ ioread32(ioaddr + NetworkConfig));
spin_lock_irq(&np->lock);
update_csr6(dev, update_link(dev));
spin_unlock_irq(&np->lock);
@@ -899,8 +902,8 @@ static void init_registers(struct net_device *dev)
/* When not a module we can work around broken '486 PCI boards. */
if (boot_cpu_data.x86 <= 4) {
i |= 0x4800;
- printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache "
- "alignment to 8 longwords.\n", dev->name);
+ dev_info(&dev->dev,
+ "This is a 386/486 PCI system, setting cache alignment to 8 longwords\n");
} else {
i |= 0xE000;
}
@@ -931,22 +934,23 @@ static void tx_timeout(struct net_device *dev)
struct netdev_private *np = netdev_priv(dev);
void __iomem *ioaddr = np->base_addr;
- printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
- " resetting...\n", dev->name, ioread32(ioaddr + IntrStatus));
+ dev_warn(&dev->dev, "Transmit timed out, status %08x, resetting...\n",
+ ioread32(ioaddr + IntrStatus));
{
int i;
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
- printk(KERN_DEBUG" Tx ring %p: ", np->tx_ring);
+ printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %8.8x", np->tx_ring[i].status);
- printk("\n");
+ printk(KERN_CONT " %08x", np->tx_ring[i].status);
+ printk(KERN_CONT "\n");
}
- printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d.\n",
- np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes);
- printk(KERN_DEBUG "Tx Descriptor addr %xh.\n",ioread32(ioaddr+0x4C));
+ printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n",
+ np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes);
+ printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C));
disable_irq(dev->irq);
spin_lock_irq(&np->lock);
@@ -1055,8 +1059,8 @@ static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
dev->trans_start = jiffies;
if (debug > 4) {
- printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
- dev->name, np->cur_tx, entry);
+ printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d\n",
+ dev->name, np->cur_tx, entry);
}
return NETDEV_TX_OK;
}
@@ -1073,8 +1077,8 @@ static void netdev_tx_done(struct net_device *dev)
if (tx_status & 0x8000) { /* There was an error, log it. */
#ifndef final_version
if (debug > 1)
- printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
- dev->name, tx_status);
+ printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
+ dev->name, tx_status);
#endif
np->stats.tx_errors++;
if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
@@ -1086,8 +1090,8 @@ static void netdev_tx_done(struct net_device *dev)
} else {
#ifndef final_version
if (debug > 3)
- printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %8.8x.\n",
- dev->name, entry, tx_status);
+ printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %08x\n",
+ dev->name, entry, tx_status);
#endif
np->stats.tx_bytes += np->tx_skbuff[entry]->len;
np->stats.collisions += (tx_status >> 3) & 15;
@@ -1130,8 +1134,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus);
if (debug > 4)
- printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n",
- dev->name, intr_status);
+ printk(KERN_DEBUG "%s: Interrupt, status %04x\n",
+ dev->name, intr_status);
if ((intr_status & (NormalIntr|AbnormalIntr)) == 0)
break;
@@ -1156,8 +1160,9 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
netdev_error(dev, intr_status);
if (--work_limit < 0) {
- printk(KERN_WARNING "%s: Too much work at interrupt, "
- "status=0x%4.4x.\n", dev->name, intr_status);
+ dev_warn(&dev->dev,
+ "Too much work at interrupt, status=0x%04x\n",
+ intr_status);
/* Set the timer to re-enable the other interrupts after
10*82usec ticks. */
spin_lock(&np->lock);
@@ -1171,8 +1176,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
} while (1);
if (debug > 3)
- printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
- dev->name, ioread32(ioaddr + IntrStatus));
+ printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x\n",
+ dev->name, ioread32(ioaddr + IntrStatus));
return IRQ_RETVAL(handled);
}
@@ -1185,8 +1190,8 @@ static int netdev_rx(struct net_device *dev)
int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
if (debug > 4) {
- printk(KERN_DEBUG " In netdev_rx(), entry %d status %4.4x.\n",
- entry, np->rx_ring[entry].status);
+ printk(KERN_DEBUG " In netdev_rx(), entry %d status %04x\n",
+ entry, np->rx_ring[entry].status);
}
/* If EOP is set on the next entry, it's a new packet. Send it up. */
@@ -1195,24 +1200,24 @@ static int netdev_rx(struct net_device *dev)
s32 status = desc->status;
if (debug > 4)
- printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n",
- status);
+ printk(KERN_DEBUG " netdev_rx() status was %08x\n",
+ status);
if (status < 0)
break;
if ((status & 0x38008300) != 0x0300) {
if ((status & 0x38000300) != 0x0300) {
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
- printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
- "multiple buffers, entry %#x status %4.4x!\n",
- dev->name, np->cur_rx, status);
+ dev_warn(&dev->dev,
+ "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n",
+ np->cur_rx, status);
np->stats.rx_length_errors++;
}
} else if (status & 0x8000) {
/* There was a fatal error. */
if (debug > 2)
- printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
- dev->name, status);
+ printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
+ dev->name, status);
np->stats.rx_errors++; /* end of a packet.*/
if (status & 0x0890) np->stats.rx_length_errors++;
if (status & 0x004C) np->stats.rx_frame_errors++;
@@ -1225,8 +1230,8 @@ static int netdev_rx(struct net_device *dev)
#ifndef final_version
if (debug > 4)
- printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d"
- " status %x.\n", pkt_len, status);
+ printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d status %x\n",
+ pkt_len, status);
#endif
/* Check if the packet is long enough to accept without copying
to a minimally-sized skbuff. */
@@ -1251,11 +1256,10 @@ static int netdev_rx(struct net_device *dev)
#ifndef final_version /* Remove after testing. */
/* You will want this info for the initial debug. */
if (debug > 5)
- printk(KERN_DEBUG " Rx data %pM %pM"
- " %2.2x%2.2x %d.%d.%d.%d.\n",
+ printk(KERN_DEBUG " Rx data %pM %pM %02x%02x %pI4\n",
&skb->data[0], &skb->data[6],
skb->data[12], skb->data[13],
- skb->data[14], skb->data[15], skb->data[16], skb->data[17]);
+ &skb->data[14]);
#endif
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
@@ -1293,8 +1297,8 @@ static void netdev_error(struct net_device *dev, int intr_status)
void __iomem *ioaddr = np->base_addr;
if (debug > 2)
- printk(KERN_DEBUG "%s: Abnormal event, %8.8x.\n",
- dev->name, intr_status);
+ printk(KERN_DEBUG "%s: Abnormal event, %08x\n",
+ dev->name, intr_status);
if (intr_status == 0xffffffff)
return;
spin_lock(&np->lock);
@@ -1314,8 +1318,8 @@ static void netdev_error(struct net_device *dev, int intr_status)
new = 127; /* load full packet before starting */
new = (np->csr6 & ~(0x7F << 14)) | (new<<14);
#endif
- printk(KERN_DEBUG "%s: Tx underflow, new csr6 %8.8x.\n",
- dev->name, new);
+ printk(KERN_DEBUG "%s: Tx underflow, new csr6 %08x\n",
+ dev->name, new);
update_csr6(dev, new);
}
if (intr_status & RxDied) { /* Missed a Rx frame. */
@@ -1357,17 +1361,16 @@ static u32 __set_rx_mode(struct net_device *dev)
memset(mc_filter, 0xff, sizeof(mc_filter));
rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys
| AcceptMyPhys;
- } else if ((dev->mc_count > multicast_filter_limit) ||
+ } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
(dev->flags & IFF_ALLMULTI)) {
/* Too many to match, or accept all multicasts. */
memset(mc_filter, 0xff, sizeof(mc_filter));
rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
} else {
struct dev_mc_list *mclist;
- int i;
+
memset(mc_filter, 0, sizeof(mc_filter));
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
int filterbit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F;
filterbit &= 0x3f;
mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
@@ -1487,11 +1490,13 @@ static int netdev_close(struct net_device *dev)
netif_stop_queue(dev);
if (debug > 1) {
- printk(KERN_DEBUG "%s: Shutting down ethercard, status was %8.8x "
- "Config %8.8x.\n", dev->name, ioread32(ioaddr + IntrStatus),
- ioread32(ioaddr + NetworkConfig));
- printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
- dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx);
+ printk(KERN_DEBUG "%s: Shutting down ethercard, status was %08x Config %08x\n",
+ dev->name, ioread32(ioaddr + IntrStatus),
+ ioread32(ioaddr + NetworkConfig));
+ printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d\n",
+ dev->name,
+ np->cur_tx, np->dirty_tx,
+ np->cur_rx, np->dirty_rx);
}
/* Stop the chip's Tx and Rx processes. */
@@ -1512,18 +1517,16 @@ static int netdev_close(struct net_device *dev)
if (debug > 2) {
int i;
- printk(KERN_DEBUG" Tx ring at %8.8x:\n",
- (int)np->tx_ring);
+ printk(KERN_DEBUG" Tx ring at %08x:\n", (int)np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
- i, np->tx_ring[i].length,
- np->tx_ring[i].status, np->tx_ring[i].buffer1);
- printk(KERN_DEBUG " Rx ring %8.8x:\n",
- (int)np->rx_ring);
+ printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
+ i, np->tx_ring[i].length,
+ np->tx_ring[i].status, np->tx_ring[i].buffer1);
+ printk(KERN_DEBUG " Rx ring %08x:\n", (int)np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++) {
- printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
- i, np->rx_ring[i].length,
- np->rx_ring[i].status, np->rx_ring[i].buffer1);
+ printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
+ i, np->rx_ring[i].length,
+ np->rx_ring[i].status, np->rx_ring[i].buffer1);
}
}
#endif /* __i386__ debugging only */
@@ -1622,9 +1625,8 @@ static int w840_resume (struct pci_dev *pdev)
goto out; /* device not suspended */
if (netif_running(dev)) {
if ((retval = pci_enable_device(pdev))) {
- printk (KERN_ERR
- "%s: pci_enable_device failed in resume\n",
- dev->name);
+ dev_err(&dev->dev,
+ "pci_enable_device failed in resume\n");
goto out;
}
spin_lock_irq(&np->lock);
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 9924c4c7e2d..acfeeb98056 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -14,6 +14,8 @@
* $Id: xircom_cb.c,v 1.33 2001/03/19 14:02:07 arjanv Exp $
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -144,7 +146,7 @@ static int link_status(struct xircom_private *card);
-static struct pci_device_id xircom_pci_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(xircom_pci_table) = {
{0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID,},
{0,},
};
@@ -234,7 +236,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
pci_write_config_word (pdev, PCI_STATUS,tmp16);
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
- printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
+ pr_err("%s: failed to allocate io-region\n", __func__);
return -ENODEV;
}
@@ -245,7 +247,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
*/
dev = alloc_etherdev(sizeof(struct xircom_private));
if (!dev) {
- printk(KERN_ERR "xircom_probe: failed to allocate etherdev\n");
+ pr_err("%s: failed to allocate etherdev\n", __func__);
goto device_fail;
}
private = netdev_priv(dev);
@@ -253,12 +255,12 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
/* Allocate the send/receive buffers */
private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle);
if (private->rx_buffer == NULL) {
- printk(KERN_ERR "xircom_probe: no memory for rx buffer \n");
+ pr_err("%s: no memory for rx buffer\n", __func__);
goto rx_buf_fail;
}
private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle);
if (private->tx_buffer == NULL) {
- printk(KERN_ERR "xircom_probe: no memory for tx buffer \n");
+ pr_err("%s: no memory for tx buffer\n", __func__);
goto tx_buf_fail;
}
@@ -281,11 +283,12 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
pci_set_drvdata(pdev, dev);
if (register_netdev(dev)) {
- printk(KERN_ERR "xircom_probe: netdevice registration failed.\n");
+ pr_err("%s: netdevice registration failed\n", __func__);
goto reg_fail;
}
- printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq);
+ dev_info(&dev->dev, "Xircom cardbus revision %i at irq %i\n",
+ pdev->revision, pdev->irq);
/* start the transmitter to get a heartbeat */
/* TODO: send 2 dummy packets here */
transceiver_voodoo(private);
@@ -347,8 +350,10 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
#ifdef DEBUG
print_binary(status);
- printk("tx status 0x%08x 0x%08x \n",card->tx_buffer[0],card->tx_buffer[4]);
- printk("rx status 0x%08x 0x%08x \n",card->rx_buffer[0],card->rx_buffer[4]);
+ printk("tx status 0x%08x 0x%08x \n",
+ card->tx_buffer[0], card->tx_buffer[4]);
+ printk("rx status 0x%08x 0x%08x \n",
+ card->rx_buffer[0], card->rx_buffer[4]);
#endif
/* Handle shared irq and hotplug */
if (status == 0 || status == 0xffffffff) {
@@ -358,9 +363,9 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
if (link_status_changed(card)) {
int newlink;
- printk(KERN_DEBUG "xircom_cb: Link status has changed \n");
+ printk(KERN_DEBUG "xircom_cb: Link status has changed\n");
newlink = link_status(card);
- printk(KERN_INFO "xircom_cb: Link is %i mbit \n",newlink);
+ dev_info(&dev->dev, "Link is %i mbit\n", newlink);
if (newlink)
netif_carrier_on(dev);
else
@@ -457,7 +462,8 @@ static int xircom_open(struct net_device *dev)
struct xircom_private *xp = netdev_priv(dev);
int retval;
enter("xircom_open");
- printk(KERN_INFO "xircom cardbus adaptor found, registering as %s, using irq %i \n",dev->name,dev->irq);
+ pr_info("xircom cardbus adaptor found, registering as %s, using irq %i \n",
+ dev->name, dev->irq);
retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
leave("xircom_open - No IRQ");
@@ -770,7 +776,7 @@ static void activate_receiver(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Receiver failed to deactivate\n");
+ pr_err("Receiver failed to deactivate\n");
}
/* enable the receiver */
@@ -787,7 +793,7 @@ static void activate_receiver(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Receiver failed to re-activate\n");
+ pr_err("Receiver failed to re-activate\n");
}
leave("activate_receiver");
@@ -818,7 +824,7 @@ static void deactivate_receiver(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Receiver failed to deactivate\n");
+ pr_err("Receiver failed to deactivate\n");
}
@@ -861,7 +867,7 @@ static void activate_transmitter(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Transmitter failed to deactivate\n");
+ pr_err("Transmitter failed to deactivate\n");
}
/* enable the transmitter */
@@ -878,7 +884,7 @@ static void activate_transmitter(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Transmitter failed to re-activate\n");
+ pr_err("Transmitter failed to re-activate\n");
}
leave("activate_transmitter");
@@ -909,7 +915,7 @@ static void deactivate_transmitter(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Transmitter failed to deactivate\n");
+ pr_err("Transmitter failed to deactivate\n");
}
@@ -1184,7 +1190,7 @@ static void investigate_read_descriptor(struct net_device *dev,struct xircom_pri
struct sk_buff *skb;
if (pkt_len > 1518) {
- printk(KERN_ERR "xircom_cb: Packet length %i is bogus \n",pkt_len);
+ pr_err("Packet length %i is bogus\n", pkt_len);
pkt_len = 1518;
}
@@ -1222,7 +1228,7 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p
status = le32_to_cpu(card->tx_buffer[4*descnr]);
#if 0
if (status & 0x8000) { /* Major error */
- printk(KERN_ERR "Major transmit error status %x \n", status);
+ pr_err("Major transmit error status %x\n", status);
card->tx_buffer[4*descnr] = 0;
netif_wake_queue (dev);
}