diff options
Diffstat (limited to 'drivers/net/tulip')
| -rw-r--r-- | drivers/net/tulip/de4x5.c | 10 | ||||
| -rw-r--r-- | drivers/net/tulip/dmfe.c | 2 | ||||
| -rw-r--r-- | drivers/net/tulip/eeprom.c | 2 |
3 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index 4dbd493b996..45144d5bd11 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -79,7 +79,7 @@ every usable DECchip board, I pinched Donald's 'next_module' field to link my modules together. - Upto 15 EISA cards can be supported under this driver, limited primarily + Up to 15 EISA cards can be supported under this driver, limited primarily by the available IRQ lines. I have checked different configurations of multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a problem yet (provided you have at least depca.c v0.38) ... @@ -517,7 +517,7 @@ struct mii_phy { u_int mci; /* 21142 MII Connector Interrupt info */ }; -#define DE4X5_MAX_PHY 8 /* Allow upto 8 attached PHY devices per board */ +#define DE4X5_MAX_PHY 8 /* Allow up to 8 attached PHY devices per board */ struct sia_phy { u_char mc; /* Media Code */ @@ -1436,7 +1436,7 @@ de4x5_sw_reset(struct net_device *dev) /* Poll for setup frame completion (adapter interrupts are disabled now) */ - for (j=0, i=0;(i<500) && (j==0);i++) { /* Upto 500ms delay */ + for (j=0, i=0;(i<500) && (j==0);i++) { /* Up to 500ms delay */ mdelay(1); if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1; } @@ -1995,7 +1995,7 @@ SetMulticastFilter(struct net_device *dev) static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST; -static int __init de4x5_eisa_probe (struct device *gendev) +static int __devinit de4x5_eisa_probe (struct device *gendev) { struct eisa_device *edev; u_long iobase; @@ -2097,7 +2097,7 @@ static int __devexit de4x5_eisa_remove (struct device *device) return 0; } -static struct eisa_device_id de4x5_eisa_ids[] = { +static const struct eisa_device_id de4x5_eisa_ids[] __devinitconst = { { "DEC4250", 0 }, /* 0 is the board name index... */ { "" } }; diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 7064e035757..fb07f48910a 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -1224,7 +1224,7 @@ static void dmfe_timer(unsigned long data) /* If chip reports that link is failed it could be because external - PHY link status pin is not conected correctly to chip + PHY link status pin is not connected correctly to chip To be sure ask PHY too. */ diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index 3031ed9c4a1..296486bf095 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -115,7 +115,7 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp) 0x02, /* phy reset sequence length */ 0x01, 0x00, /* phy reset sequence */ 0x00, 0x78, /* media capabilities */ - 0x00, 0xe0, /* nway advertisment */ + 0x00, 0xe0, /* nway advertisement */ 0x00, 0x05, /* fdx bit map */ 0x00, 0x06 /* ttm bit map */ }; |