diff options
Diffstat (limited to 'drivers/net/usb/r8152.c')
| -rw-r--r-- | drivers/net/usb/r8152.c | 52 |
1 files changed, 42 insertions, 10 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 25431965a62..87f71047621 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -59,6 +59,7 @@ #define PLA_WDT6_CTRL 0xe428 #define PLA_TCR0 0xe610 #define PLA_TCR1 0xe612 +#define PLA_MTPS 0xe615 #define PLA_TXFIFO_CTRL 0xe618 #define PLA_RSTTALLY 0xe800 #define PLA_CR 0xe813 @@ -180,6 +181,10 @@ /* PLA_TCR1 */ #define VERSION_MASK 0x7cf0 +/* PLA_MTPS */ +#define MTPS_JUMBO (12 * 1024 / 64) +#define MTPS_DEFAULT (6 * 1024 / 64) + /* PLA_RSTTALLY */ #define TALLY_RESET 0x0001 @@ -282,7 +287,7 @@ /* USB_DEV_STAT */ #define STAT_SPEED_MASK 0x0006 #define STAT_SPEED_HIGH 0x0000 -#define STAT_SPEED_FULL 0x0001 +#define STAT_SPEED_FULL 0x0002 /* USB_TX_AGG */ #define TX_AGG_MAX_THRESHOLD 0x03 @@ -440,8 +445,11 @@ enum rtl_register_content { #define BYTE_EN_START_MASK 0x0f #define BYTE_EN_END_MASK 0xf0 +#define RTL8153_MAX_PACKET 9216 /* 9K */ +#define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - VLAN_HLEN) #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + VLAN_HLEN) -#define RTL8152_TX_TIMEOUT (HZ) +#define RTL8153_RMS RTL8153_MAX_PACKET +#define RTL8152_TX_TIMEOUT (5 * HZ) /* rtl8152 flags */ enum rtl8152_flags { @@ -1359,7 +1367,7 @@ static void r8152_csum_workaround(struct r8152 *tp, struct sk_buff *skb, struct sk_buff_head seg_list; struct sk_buff *segs, *nskb; - features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO); + features &= ~(NETIF_F_SG | NETIF_F_IPV6_CSUM | NETIF_F_TSO6); segs = skb_gso_segment(skb, features); if (IS_ERR(segs) || !segs) goto drop; @@ -2292,9 +2300,8 @@ static void r8152b_exit_oob(struct r8152 *tp) /* rx share fifo credit full threshold */ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT); - ocp_data &= STAT_SPEED_MASK; - if (ocp_data == STAT_SPEED_FULL) { + if (tp->udev->speed == USB_SPEED_FULL || + tp->udev->speed == USB_SPEED_LOW) { /* rx share fifo credit near full threshold */ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_FULL); @@ -2522,7 +2529,8 @@ static void r8153_first_init(struct r8152 *tp) ocp_data &= ~CPCR_RX_VLAN; ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS); + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); ocp_data |= TCR0_AUTO_FIFO; @@ -2572,7 +2580,7 @@ static void r8153_enter_oob(struct r8152 *tp) mdelay(1); } - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS); ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); ocp_data &= ~TEREDO_WAKE_MASK; @@ -3204,8 +3212,13 @@ static void rtl8152_get_ethtool_stats(struct net_device *dev, struct r8152 *tp = netdev_priv(dev); struct tally_counter tally; + if (usb_autopm_get_interface(tp->intf) < 0) + return; + generic_ocp_read(tp, PLA_TALLYCNT, sizeof(tally), &tally, MCU_TYPE_PLA); + usb_autopm_put_interface(tp->intf); + data[0] = le64_to_cpu(tally.tx_packets); data[1] = le64_to_cpu(tally.rx_packets); data[2] = le64_to_cpu(tally.tx_errors); @@ -3284,6 +3297,26 @@ out: return res; } +static int rtl8152_change_mtu(struct net_device *dev, int new_mtu) +{ + struct r8152 *tp = netdev_priv(dev); + + switch (tp->version) { + case RTL_VER_01: + case RTL_VER_02: + return eth_change_mtu(dev, new_mtu); + default: + break; + } + + if (new_mtu < 68 || new_mtu > RTL8153_MAX_MTU) + return -EINVAL; + + dev->mtu = new_mtu; + + return 0; +} + static const struct net_device_ops rtl8152_netdev_ops = { .ndo_open = rtl8152_open, .ndo_stop = rtl8152_close, @@ -3292,8 +3325,7 @@ static const struct net_device_ops rtl8152_netdev_ops = { .ndo_tx_timeout = rtl8152_tx_timeout, .ndo_set_rx_mode = rtl8152_set_rx_mode, .ndo_set_mac_address = rtl8152_set_mac_address, - - .ndo_change_mtu = eth_change_mtu, + .ndo_change_mtu = rtl8152_change_mtu, .ndo_validate_addr = eth_validate_addr, }; |