diff options
Diffstat (limited to 'drivers/net/usb/r8152.c')
| -rw-r--r-- | drivers/net/usb/r8152.c | 916 |
1 files changed, 778 insertions, 138 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 51073721e22..e8fac732c6f 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013 Realtek Semiconductor Corp. All rights reserved. + * Copyright (c) 2014 Realtek Semiconductor Corp. All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -7,7 +7,6 @@ * */ -#include <linux/init.h> #include <linux/signal.h> #include <linux/slab.h> #include <linux/module.h> @@ -24,9 +23,9 @@ #include <linux/ipv6.h> /* Version Information */ -#define DRIVER_VERSION "v1.02.0 (2013/10/28)" +#define DRIVER_VERSION "v1.04.0 (2014/01/15)" #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>" -#define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters" +#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters" #define MODULENAME "r8152" #define R8152_PHY_ID 32 @@ -39,15 +38,24 @@ #define PLA_RXFIFO_CTRL2 0xc0a8 #define PLA_FMC 0xc0b4 #define PLA_CFG_WOL 0xc0b6 +#define PLA_TEREDO_CFG 0xc0bc #define PLA_MAR 0xcd00 +#define PLA_BACKUP 0xd000 #define PAL_BDC_CR 0xd1a0 +#define PLA_TEREDO_TIMER 0xd2cc +#define PLA_REALWOW_TIMER 0xd2e8 #define PLA_LEDSEL 0xdd90 #define PLA_LED_FEATURE 0xdd92 #define PLA_PHYAR 0xde00 +#define PLA_BOOT_CTRL 0xe004 #define PLA_GPHY_INTR_IMR 0xe022 #define PLA_EEE_CR 0xe040 #define PLA_EEEP_CR 0xe080 #define PLA_MAC_PWR_CTRL 0xe0c0 +#define PLA_MAC_PWR_CTRL2 0xe0ca +#define PLA_MAC_PWR_CTRL3 0xe0cc +#define PLA_MAC_PWR_CTRL4 0xe0ce +#define PLA_WDT6_CTRL 0xe428 #define PLA_TCR0 0xe610 #define PLA_TCR1 0xe612 #define PLA_TXFIFO_CTRL 0xe618 @@ -73,16 +81,25 @@ #define PLA_BP_5 0xfc32 #define PLA_BP_6 0xfc34 #define PLA_BP_7 0xfc36 +#define PLA_BP_EN 0xfc38 +#define USB_U2P3_CTRL 0xb460 #define USB_DEV_STAT 0xb808 #define USB_USB_CTRL 0xd406 #define USB_PHY_CTRL 0xd408 #define USB_TX_AGG 0xd40a #define USB_RX_BUF_TH 0xd40c #define USB_USB_TIMER 0xd428 +#define USB_RX_EARLY_AGG 0xd42c #define USB_PM_CTRL_STATUS 0xd432 #define USB_TX_DMA 0xd434 +#define USB_TOLERANCE 0xd490 +#define USB_LPM_CTRL 0xd41a #define USB_UPS_CTRL 0xd800 +#define USB_MISC_0 0xd81a +#define USB_POWER_CUT 0xd80a +#define USB_AFE_CTRL2 0xd824 +#define USB_WDT11_CTRL 0xe43c #define USB_BP_BA 0xfc26 #define USB_BP_0 0xfc28 #define USB_BP_1 0xfc2a @@ -92,14 +109,30 @@ #define USB_BP_5 0xfc32 #define USB_BP_6 0xfc34 #define USB_BP_7 0xfc36 +#define USB_BP_EN 0xfc38 /* OCP Registers */ #define OCP_ALDPS_CONFIG 0x2010 #define OCP_EEE_CONFIG1 0x2080 #define OCP_EEE_CONFIG2 0x2092 #define OCP_EEE_CONFIG3 0x2094 +#define OCP_BASE_MII 0xa400 #define OCP_EEE_AR 0xa41a #define OCP_EEE_DATA 0xa41c +#define OCP_PHY_STATUS 0xa420 +#define OCP_POWER_CFG 0xa430 +#define OCP_EEE_CFG 0xa432 +#define OCP_SRAM_ADDR 0xa436 +#define OCP_SRAM_DATA 0xa438 +#define OCP_DOWN_SPEED 0xa442 +#define OCP_EEE_CFG2 0xa5d0 +#define OCP_ADC_CFG 0xbc06 + +/* SRAM Register */ +#define SRAM_LPF_CFG 0x8012 +#define SRAM_10M_AMP1 0x8080 +#define SRAM_10M_AMP2 0x8082 +#define SRAM_IMPEDANCE 0x8084 /* PLA_RCR */ #define RCR_AAP 0x00000001 @@ -116,14 +149,17 @@ #define RXFIFO_THR2_FULL 0x00000060 #define RXFIFO_THR2_HIGH 0x00000038 #define RXFIFO_THR2_OOB 0x0000004a +#define RXFIFO_THR2_NORMAL 0x00a0 /* PLA_RXFIFO_CTRL2 */ #define RXFIFO_THR3_FULL 0x00000078 #define RXFIFO_THR3_HIGH 0x00000048 #define RXFIFO_THR3_OOB 0x0000005a +#define RXFIFO_THR3_NORMAL 0x0110 /* PLA_TXFIFO_CTRL */ #define TXFIFO_THR_NORMAL 0x00400008 +#define TXFIFO_THR_NORMAL2 0x01000008 /* PLA_FMC */ #define FMC_FCR_MCU_EN 0x0001 @@ -131,6 +167,9 @@ /* PLA_EEEP_CR */ #define EEEP_CR_EEEP_TX 0x0002 +/* PLA_WDT6_CTRL */ +#define WDT6_SET_MODE 0x0010 + /* PLA_TCR0 */ #define TCR0_TX_EMPTY 0x0800 #define TCR0_AUTO_FIFO 0x0080 @@ -168,6 +207,12 @@ /* PLA_CFG_WOL */ #define MAGIC_EN 0x0001 +/* PLA_TEREDO_CFG */ +#define TEREDO_SEL 0x8000 +#define TEREDO_WAKE_MASK 0x7f00 +#define TEREDO_RS_EVENT_MASK 0x00fe +#define OOB_TEREDO_EN 0x0001 + /* PAL_BDC_CR */ #define ALDPS_PROXY_MODE 0x0001 @@ -185,6 +230,25 @@ #define D3_CLK_GATED_EN 0x00004000 #define MCU_CLK_RATIO 0x07010f07 #define MCU_CLK_RATIO_MASK 0x0f0f0f0f +#define ALDPS_SPDWN_RATIO 0x0f87 + +/* PLA_MAC_PWR_CTRL2 */ +#define EEE_SPDWN_RATIO 0x8007 + +/* PLA_MAC_PWR_CTRL3 */ +#define PKT_AVAIL_SPDWN_EN 0x0100 +#define SUSPEND_SPDWN_EN 0x0004 +#define U1U2_SPDWN_EN 0x0002 +#define L1_SPDWN_EN 0x0001 + +/* PLA_MAC_PWR_CTRL4 */ +#define PWRSAVE_SPDWN_EN 0x1000 +#define RXDV_SPDWN_EN 0x0800 +#define TX10MIDLE_EN 0x0100 +#define TP100_SPDWN_EN 0x0020 +#define TP500_SPDWN_EN 0x0010 +#define TP1000_SPDWN_EN 0x0008 +#define EEE_SPDWN_EN 0x0001 /* PLA_GPHY_INTR_IMR */ #define GPHY_STS_MSK 0x0001 @@ -199,6 +263,9 @@ #define EEE_RX_EN 0x0001 #define EEE_TX_EN 0x0002 +/* PLA_BOOT_CTRL */ +#define AUTOLOAD_DONE 0x0002 + /* USB_DEV_STAT */ #define STAT_SPEED_MASK 0x0006 #define STAT_SPEED_HIGH 0x0000 @@ -208,7 +275,9 @@ #define TX_AGG_MAX_THRESHOLD 0x03 /* USB_RX_BUF_TH */ -#define RX_BUF_THR 0x7a120180 +#define RX_THR_SUPPER 0x0c350180 +#define RX_THR_HIGH 0x7a120180 +#define RX_THR_SLOW 0xffff0180 /* USB_TX_DMA */ #define TEST_MODE_DISABLE 0x00000001 @@ -218,17 +287,55 @@ #define POWER_CUT 0x0100 /* USB_PM_CTRL_STATUS */ -#define RWSUME_INDICATE 0x0001 +#define RESUME_INDICATE 0x0001 /* USB_USB_CTRL */ #define RX_AGG_DISABLE 0x0010 +/* USB_U2P3_CTRL */ +#define U2P3_ENABLE 0x0001 + +/* USB_POWER_CUT */ +#define PWR_EN 0x0001 +#define PHASE2_EN 0x0008 + +/* USB_MISC_0 */ +#define PCUT_STATUS 0x0001 + +/* USB_RX_EARLY_AGG */ +#define EARLY_AGG_SUPPER 0x0e832981 +#define EARLY_AGG_HIGH 0x0e837a12 +#define EARLY_AGG_SLOW 0x0e83ffff + +/* USB_WDT11_CTRL */ +#define TIMER11_EN 0x0001 + +/* USB_LPM_CTRL */ +#define LPM_TIMER_MASK 0x0c +#define LPM_TIMER_500MS 0x04 /* 500 ms */ +#define LPM_TIMER_500US 0x0c /* 500 us */ + +/* USB_AFE_CTRL2 */ +#define SEN_VAL_MASK 0xf800 +#define SEN_VAL_NORMAL 0xa000 +#define SEL_RXIDLE 0x0100 + /* OCP_ALDPS_CONFIG */ #define ENPWRSAVE 0x8000 #define ENPDNPS 0x0200 #define LINKENA 0x0100 #define DIS_SDSAVE 0x0010 +/* OCP_PHY_STATUS */ +#define PHY_STAT_MASK 0x0007 +#define PHY_STAT_LAN_ON 3 +#define PHY_STAT_PWRDN 5 + +/* OCP_POWER_CFG */ +#define EEE_CLKDIV_EN 0x8000 +#define EN_ALDPS 0x0004 +#define EN_10M_PLLOFF 0x0001 + /* OCP_EEE_CONFIG1 */ #define RG_TXLPI_MSK_HFDUP 0x8000 #define RG_MATCLR_EN 0x4000 @@ -263,7 +370,36 @@ #define EEE_ADDR 0x003C #define EEE_DATA 0x0002 +/* OCP_EEE_CFG */ +#define CTAP_SHORT_EN 0x0040 +#define EEE10_EN 0x0010 + +/* OCP_DOWN_SPEED */ +#define EN_10M_BGOFF 0x0080 + +/* OCP_EEE_CFG2 */ +#define MY1000_EEE 0x0004 +#define MY100_EEE 0x0002 + +/* OCP_ADC_CFG */ +#define CKADSEL_L 0x0100 +#define ADC_EN 0x0080 +#define EN_EMI_L 0x0040 + +/* SRAM_LPF_CFG */ +#define LPF_AUTO_TUNE 0x8000 + +/* SRAM_10M_AMP1 */ +#define GDAC_IB_UPALL 0x0008 + +/* SRAM_10M_AMP2 */ +#define AMP_DN 0x0200 + +/* SRAM_IMPEDANCE */ +#define RX_DRIVING_MASK 0x6000 + enum rtl_register_content { + _1000bps = 0x10, _100bps = 0x08, _10bps = 0x04, LINK_STATUS = 0x02, @@ -273,6 +409,9 @@ enum rtl_register_content { #define RTL8152_MAX_TX 10 #define RTL8152_MAX_RX 10 #define INTBUFSIZE 2 +#define CRC_SIZE 4 +#define TX_ALIGN 4 +#define RX_ALIGN 8 #define INTR_LINK 0x0004 @@ -302,10 +441,17 @@ enum rtl8152_flags { /* Define these values to match your device */ #define VENDOR_ID_REALTEK 0x0bda #define PRODUCT_ID_RTL8152 0x8152 +#define PRODUCT_ID_RTL8153 0x8153 + +#define VENDOR_ID_SAMSUNG 0x04e8 +#define PRODUCT_ID_SAMSUNG 0xa101 #define MCU_TYPE_PLA 0x0100 #define MCU_TYPE_USB 0x0000 +#define REALTEK_USB_DEVICE(vend, prod) \ + USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC) + struct rx_desc { __le32 opts1; #define RX_LEN_MASK 0x7fff @@ -363,6 +509,15 @@ struct r8152 { spinlock_t rx_lock, tx_lock; struct delayed_work schedule; struct mii_if_info mii; + + struct rtl_ops { + void (*init)(struct r8152 *); + int (*enable)(struct r8152 *); + void (*disable)(struct r8152 *); + void (*down)(struct r8152 *); + void (*unload)(struct r8152 *); + } rtl_ops; + int intr_interval; u32 msg_enable; u32 tx_qlen; @@ -375,7 +530,11 @@ struct r8152 { enum rtl_version { RTL_VER_UNKNOWN = 0, RTL_VER_01, - RTL_VER_02 + RTL_VER_02, + RTL_VER_03, + RTL_VER_04, + RTL_VER_05, + RTL_VER_MAX }; /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). @@ -427,8 +586,8 @@ int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data, u16 type) { - u16 limit = 64; - int ret = 0; + u16 limit = 64; + int ret = 0; if (test_bit(RTL8152_UNPLUG, &tp->flags)) return -ENODEV; @@ -467,9 +626,9 @@ static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data, u16 type) { - int ret; - u16 byteen_start, byteen_end, byen; - u16 limit = 512; + int ret; + u16 byteen_start, byteen_end, byen; + u16 limit = 512; if (test_bit(RTL8152_UNPLUG, &tp->flags)) return -ENODEV; @@ -653,45 +812,54 @@ static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data) generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type); } -static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value) +static u16 ocp_reg_read(struct r8152 *tp, u16 addr) { - u32 ocp_data; - int i; + u16 ocp_base, ocp_index; - ocp_data = PHYAR_FLAG | ((reg_addr & 0x1f) << 16) | - (value & 0xffff); + ocp_base = addr & 0xf000; + if (ocp_base != tp->ocp_base) { + ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base); + tp->ocp_base = ocp_base; + } - ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data); + ocp_index = (addr & 0x0fff) | 0xb000; + return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index); +} - for (i = 20; i > 0; i--) { - udelay(25); - ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR); - if (!(ocp_data & PHYAR_FLAG)) - break; +static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data) +{ + u16 ocp_base, ocp_index; + + ocp_base = addr & 0xf000; + if (ocp_base != tp->ocp_base) { + ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base); + tp->ocp_base = ocp_base; } - udelay(20); + + ocp_index = (addr & 0x0fff) | 0xb000; + ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data); } -static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr) +static inline void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value) { - u32 ocp_data; - int i; - - ocp_data = (reg_addr & 0x1f) << 16; - ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data); + ocp_reg_write(tp, OCP_BASE_MII + reg_addr * 2, value); +} - for (i = 20; i > 0; i--) { - udelay(25); - ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR); - if (ocp_data & PHYAR_FLAG) - break; - } - udelay(20); +static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr) +{ + return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2); +} - if (!(ocp_data & PHYAR_FLAG)) - return -EAGAIN; +static void sram_write(struct r8152 *tp, u16 addr, u16 data) +{ + ocp_reg_write(tp, OCP_SRAM_ADDR, addr); + ocp_reg_write(tp, OCP_SRAM_DATA, data); +} - return (u16)(ocp_data & 0xffff); +static u16 sram_read(struct r8152 *tp, u16 addr) +{ + ocp_reg_write(tp, OCP_SRAM_ADDR, addr); + return ocp_reg_read(tp, OCP_SRAM_DATA); } static int read_mii_word(struct net_device *netdev, int phy_id, int reg) @@ -715,20 +883,6 @@ void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val) r8152_mdio_write(tp, reg, val); } -static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data) -{ - u16 ocp_base, ocp_index; - - ocp_base = addr & 0xf000; - if (ocp_base != tp->ocp_base) { - ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base); - tp->ocp_base = ocp_base; - } - - ocp_index = (addr & 0x0fff) | 0xb000; - ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data); -} - static int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags); @@ -814,10 +968,12 @@ static void read_bulk_callback(struct urb *urb) case -ENOENT: return; /* the urb is in unlink state */ case -ETIME: - pr_warn_ratelimited("may be reset is needed?..\n"); + if (net_ratelimit()) + netdev_warn(netdev, "maybe reset is needed?\n"); break; default: - pr_warn_ratelimited("Rx status %d\n", status); + if (net_ratelimit()) + netdev_warn(netdev, "Rx status %d\n", status); break; } @@ -850,7 +1006,8 @@ static void write_bulk_callback(struct urb *urb) stats = rtl8152_get_stats(tp->netdev); if (status) { - pr_warn_ratelimited("Tx status %d\n", status); + if (net_ratelimit()) + netdev_warn(tp->netdev, "Tx status %d\n", status); stats->tx_errors += agg->skb_num; } else { stats->tx_packets += agg->skb_num; @@ -927,17 +1084,17 @@ resubmit: netif_device_detach(tp->netdev); else if (res) netif_err(tp, intr, tp->netdev, - "can't resubmit intr, status %d\n", res); + "can't resubmit intr, status %d\n", res); } static inline void *rx_agg_align(void *data) { - return (void *)ALIGN((uintptr_t)data, 8); + return (void *)ALIGN((uintptr_t)data, RX_ALIGN); } static inline void *tx_agg_align(void *data) { - return (void *)ALIGN((uintptr_t)data, 4); + return (void *)ALIGN((uintptr_t)data, TX_ALIGN); } static void free_all_mem(struct r8152 *tp) @@ -945,40 +1102,28 @@ static void free_all_mem(struct r8152 *tp) int i; for (i = 0; i < RTL8152_MAX_RX; i++) { - if (tp->rx_info[i].urb) { - usb_free_urb(tp->rx_info[i].urb); - tp->rx_info[i].urb = NULL; - } + usb_free_urb(tp->rx_info[i].urb); + tp->rx_info[i].urb = NULL; - if (tp->rx_info[i].buffer) { - kfree(tp->rx_info[i].buffer); - tp->rx_info[i].buffer = NULL; - tp->rx_info[i].head = NULL; - } + kfree(tp->rx_info[i].buffer); + tp->rx_info[i].buffer = NULL; + tp->rx_info[i].head = NULL; } for (i = 0; i < RTL8152_MAX_TX; i++) { - if (tp->tx_info[i].urb) { - usb_free_urb(tp->tx_info[i].urb); - tp->tx_info[i].urb = NULL; - } + usb_free_urb(tp->tx_info[i].urb); + tp->tx_info[i].urb = NULL; - if (tp->tx_info[i].buffer) { - kfree(tp->tx_info[i].buffer); - tp->tx_info[i].buffer = NULL; - tp->tx_info[i].head = NULL; - } + kfree(tp->tx_info[i].buffer); + tp->tx_info[i].buffer = NULL; + tp->tx_info[i].head = NULL; } - if (tp->intr_urb) { - usb_free_urb(tp->intr_urb); - tp->intr_urb = NULL; - } + usb_free_urb(tp->intr_urb); + tp->intr_urb = NULL; - if (tp->intr_buff) { - kfree(tp->intr_buff); - tp->intr_buff = NULL; - } + kfree(tp->intr_buff); + tp->intr_buff = NULL; } static int alloc_all_mem(struct r8152 *tp) @@ -1006,7 +1151,8 @@ static int alloc_all_mem(struct r8152 *tp) if (buf != rx_agg_align(buf)) { kfree(buf); - buf = kmalloc_node(rx_buf_sz + 8, GFP_KERNEL, node); + buf = kmalloc_node(rx_buf_sz + RX_ALIGN, GFP_KERNEL, + node); if (!buf) goto err1; } @@ -1031,7 +1177,8 @@ static int alloc_all_mem(struct r8152 *tp) if (buf != tx_agg_align(buf)) { kfree(buf); - buf = kmalloc_node(rx_buf_sz + 4, GFP_KERNEL, node); + buf = kmalloc_node(rx_buf_sz + TX_ALIGN, GFP_KERNEL, + node); if (!buf) goto err1; } @@ -1231,7 +1378,7 @@ static void rx_bottom(struct r8152 *tp) stats = rtl8152_get_stats(netdev); - pkt_len -= 4; /* CRC */ + pkt_len -= CRC_SIZE; rx_data += sizeof(struct rx_desc); skb = netdev_alloc_skb_ip_align(netdev, pkt_len); @@ -1246,7 +1393,7 @@ static void rx_bottom(struct r8152 *tp) stats->rx_packets++; stats->rx_bytes += pkt_len; - rx_data = rx_agg_align(rx_data + pkt_len + 4); + rx_data = rx_agg_align(rx_data + pkt_len + CRC_SIZE); rx_desc = (struct rx_desc *)rx_data; len_used = (int)(rx_data - (u8 *)agg->head); len_used += sizeof(struct rx_desc); @@ -1336,7 +1483,7 @@ static void rtl8152_tx_timeout(struct net_device *netdev) struct r8152 *tp = netdev_priv(netdev); int i; - netif_warn(tp, tx_err, netdev, "Tx timeout.\n"); + netif_warn(tp, tx_err, netdev, "Tx timeout\n"); for (i = 0; i < RTL8152_MAX_TX; i++) usb_unlink_urb(tp->tx_info[i].urb); } @@ -1449,13 +1596,11 @@ static inline u8 rtl8152_get_speed(struct r8152 *tp) return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); } -static int rtl8152_enable(struct r8152 *tp) +static void rtl_set_eee_plus(struct r8152 *tp) { u32 ocp_data; - int i, ret; u8 speed; - set_tx_qlen(tp); speed = rtl8152_get_speed(tp); if (speed & _10bps) { ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); @@ -1466,6 +1611,12 @@ static int rtl8152_enable(struct r8152 *tp) ocp_data &= ~EEEP_CR_EEEP_TX; ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); } +} + +static int rtl_enable(struct r8152 *tp) +{ + u32 ocp_data; + int i, ret; r8152b_reset_packet_filter(tp); @@ -1487,6 +1638,47 @@ static int rtl8152_enable(struct r8152 *tp) return ret; } +static int rtl8152_enable(struct r8152 *tp) +{ + set_tx_qlen(tp); + rtl_set_eee_plus(tp); + + return rtl_enable(tp); +} + +static void r8153_set_rx_agg(struct r8152 *tp) +{ + u8 speed; + + speed = rtl8152_get_speed(tp); + if (speed & _1000bps) { + if (tp->udev->speed == USB_SPEED_SUPER) { + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, + RX_THR_SUPPER); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, + EARLY_AGG_SUPPER); + } else { + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, + RX_THR_HIGH); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, + EARLY_AGG_HIGH); + } + } else { + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, + EARLY_AGG_SLOW); + } +} + +static int rtl8153_enable(struct r8152 *tp) +{ + set_tx_qlen(tp); + rtl_set_eee_plus(tp); + r8153_set_rx_agg(tp); + + return rtl_enable(tp); +} + static void rtl8152_disable(struct r8152 *tp) { struct net_device_stats *stats = rtl8152_get_stats(tp->netdev); @@ -1596,7 +1788,7 @@ static void r8152b_exit_oob(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL); ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD); - ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_BUF_THR); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH); ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA, TEST_MODE_DISABLE | TX_SIZE_ADJUST1); @@ -1613,8 +1805,8 @@ static void r8152b_exit_oob(struct r8152 *tp) static void r8152b_enter_oob(struct r8152 *tp) { - u32 ocp_data; - int i; + u32 ocp_data; + int i; ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data &= ~NOW_IS_OOB; @@ -1685,15 +1877,269 @@ static inline void r8152b_enable_aldps(struct r8152 *tp) LINKENA | DIS_SDSAVE); } +static void r8153_hw_phy_cfg(struct r8152 *tp) +{ + u32 ocp_data; + u16 data; + + ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L); + r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE); + + if (tp->version == RTL_VER_03) { + data = ocp_reg_read(tp, OCP_EEE_CFG); + data &= ~CTAP_SHORT_EN; + ocp_reg_write(tp, OCP_EEE_CFG, data); + } + + data = ocp_reg_read(tp, OCP_POWER_CFG); + data |= EEE_CLKDIV_EN; + ocp_reg_write(tp, OCP_POWER_CFG, data); + + data = ocp_reg_read(tp, OCP_DOWN_SPEED); + data |= EN_10M_BGOFF; + ocp_reg_write(tp, OCP_DOWN_SPEED, data); + data = ocp_reg_read(tp, OCP_POWER_CFG); + data |= EN_10M_PLLOFF; + ocp_reg_write(tp, OCP_POWER_CFG, data); + data = sram_read(tp, SRAM_IMPEDANCE); + data &= ~RX_DRIVING_MASK; + sram_write(tp, SRAM_IMPEDANCE, data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); + ocp_data |= PFM_PWM_SWITCH; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); + + data = sram_read(tp, SRAM_LPF_CFG); + data |= LPF_AUTO_TUNE; + sram_write(tp, SRAM_LPF_CFG, data); + + data = sram_read(tp, SRAM_10M_AMP1); + data |= GDAC_IB_UPALL; + sram_write(tp, SRAM_10M_AMP1, data); + data = sram_read(tp, SRAM_10M_AMP2); + data |= AMP_DN; + sram_write(tp, SRAM_10M_AMP2, data); +} + +static void r8153_u1u2en(struct r8152 *tp, int enable) +{ + u8 u1u2[8]; + + if (enable) + memset(u1u2, 0xff, sizeof(u1u2)); + else + memset(u1u2, 0x00, sizeof(u1u2)); + + usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2); +} + +static void r8153_u2p3en(struct r8152 *tp, int enable) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL); + if (enable) + ocp_data |= U2P3_ENABLE; + else + ocp_data &= ~U2P3_ENABLE; + ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data); +} + +static void r8153_power_cut_en(struct r8152 *tp, int enable) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT); + if (enable) + ocp_data |= PWR_EN | PHASE2_EN; + else + ocp_data &= ~(PWR_EN | PHASE2_EN); + ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); + ocp_data &= ~PCUT_STATUS; + ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); +} + +static void r8153_teredo_off(struct r8152 *tp) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); + ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0); + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0); +} + +static void r8153_first_init(struct r8152 *tp) +{ + u32 ocp_data; + int i; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); + ocp_data |= RXDY_GATED_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); + + r8153_teredo_off(tp); + + ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); + ocp_data &= ~RCR_ACPT_ALL; + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); + + r8153_hw_phy_cfg(tp); + + rtl8152_nic_reset(tp); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + ocp_data &= ~NOW_IS_OOB; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); + ocp_data &= ~MCU_BORW_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); + + for (i = 0; i < 1000; i++) { + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + if (ocp_data & LINK_LIST_READY) + break; + mdelay(1); + } + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); + ocp_data |= RE_INIT_LL; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); + + for (i = 0; i < 1000; i++) { + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + if (ocp_data & LINK_LIST_READY) + break; + mdelay(1); + } + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); + ocp_data &= ~CPCR_RX_VLAN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); + ocp_data |= TCR0_AUTO_FIFO; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data); + + rtl8152_nic_reset(tp); + + /* rx share fifo credit full threshold */ + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL); + /* TX share fifo free credit full threshold */ + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2); + + /* rx aggregation */ + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); + ocp_data &= ~RX_AGG_DISABLE; + ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); +} + +static void r8153_enter_oob(struct r8152 *tp) +{ + u32 ocp_data; + int i; + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + ocp_data &= ~NOW_IS_OOB; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); + + rtl8152_disable(tp); + + for (i = 0; i < 1000; i++) { + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + if (ocp_data & LINK_LIST_READY) + break; + mdelay(1); + } + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); + ocp_data |= RE_INIT_LL; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); + + for (i = 0; i < 1000; i++) { + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + if (ocp_data & LINK_LIST_READY) + break; + mdelay(1); + } + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL); + ocp_data |= MAGIC_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); + ocp_data &= ~TEREDO_WAKE_MASK; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); + ocp_data |= CPCR_RX_VLAN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); + ocp_data |= ALDPS_PROXY_MODE; + ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); + + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); + ocp_data &= ~RXDY_GATED_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); + + ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); + ocp_data |= RCR_APM | RCR_AM | RCR_AB; + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); +} + +static void r8153_disable_aldps(struct r8152 *tp) +{ + u16 data; + + data = ocp_reg_read(tp, OCP_POWER_CFG); + data &= ~EN_ALDPS; + ocp_reg_write(tp, OCP_POWER_CFG, data); + msleep(20); +} + +static void r8153_enable_aldps(struct r8152 *tp) +{ + u16 data; + + data = ocp_reg_read(tp, OCP_POWER_CFG); + data |= EN_ALDPS; + ocp_reg_write(tp, OCP_POWER_CFG, data); +} + static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) { - u16 bmcr, anar; + u16 bmcr, anar, gbcr; int ret = 0; cancel_delayed_work_sync(&tp->schedule); anar = r8152_mdio_read(tp, MII_ADVERTISE); anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | ADVERTISE_100HALF | ADVERTISE_100FULL); + if (tp->mii.supports_gmii) { + gbcr = r8152_mdio_read(tp, MII_CTRL1000); + gbcr &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + } else { + gbcr = 0; + } if (autoneg == AUTONEG_DISABLE) { if (speed == SPEED_10) { @@ -1702,6 +2148,9 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) } else if (speed == SPEED_100) { bmcr = BMCR_SPEED100; anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; + } else if (speed == SPEED_1000 && tp->mii.supports_gmii) { + bmcr = BMCR_SPEED1000; + gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF; } else { ret = -EINVAL; goto out; @@ -1723,6 +2172,16 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) anar |= ADVERTISE_10HALF; anar |= ADVERTISE_100HALF; } + } else if (speed == SPEED_1000 && tp->mii.supports_gmii) { + if (duplex == DUPLEX_FULL) { + anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; + anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; + gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF; + } else { + anar |= ADVERTISE_10HALF; + anar |= ADVERTISE_100HALF; + gbcr |= ADVERTISE_1000HALF; + } } else { ret = -EINVAL; goto out; @@ -1731,6 +2190,9 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) bmcr = BMCR_ANENABLE | BMCR_ANRESTART; } + if (tp->mii.supports_gmii) + r8152_mdio_write(tp, MII_CTRL1000, gbcr); + r8152_mdio_write(tp, MII_ADVERTISE, anar); r8152_mdio_write(tp, MII_BMCR, bmcr); @@ -1752,6 +2214,15 @@ static void rtl8152_down(struct r8152 *tp) r8152b_enable_aldps(tp); } +static void rtl8153_down(struct r8152 *tp) +{ + r8153_u1u2en(tp, 0); + r8153_power_cut_en(tp, 0); + r8153_disable_aldps(tp); + r8153_enter_oob(tp); + r8153_enable_aldps(tp); +} + static void set_carrier(struct r8152 *tp) { struct net_device *netdev = tp->netdev; @@ -1762,7 +2233,7 @@ static void set_carrier(struct r8152 *tp) if (speed & LINK_STATUS) { if (!(tp->speed & LINK_STATUS)) { - rtl8152_enable(tp); + tp->rtl_ops.enable(tp); set_bit(RTL8152_SET_RX_MODE, &tp->flags); netif_carrier_on(netdev); } @@ -1770,7 +2241,7 @@ static void set_carrier(struct r8152 *tp) if (tp->speed & LINK_STATUS) { netif_carrier_off(netdev); tasklet_disable(&tp->tl); - rtl8152_disable(tp); + tp->rtl_ops.disable(tp); tasklet_enable(&tp->tl); } } @@ -1806,12 +2277,14 @@ static int rtl8152_open(struct net_device *netdev) if (res) { if (res == -ENODEV) netif_device_detach(tp->netdev); - netif_warn(tp, ifup, netdev, - "intr_urb submit failed: %d\n", res); + netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n", + res); return res; } - rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL); + rtl8152_set_speed(tp, AUTONEG_ENABLE, + tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, + DUPLEX_FULL); tp->speed = 0; netif_carrier_off(netdev); netif_start_queue(netdev); @@ -1830,7 +2303,7 @@ static int rtl8152_close(struct net_device *netdev) cancel_delayed_work_sync(&tp->schedule); netif_stop_queue(netdev); tasklet_disable(&tp->tl); - rtl8152_disable(tp); + tp->rtl_ops.disable(tp); tasklet_enable(&tp->tl); return res; @@ -1851,9 +2324,16 @@ static void rtl_clear_bp(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0); } +static void r8153_clear_bp(struct r8152 *tp) +{ + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0); + ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0); + rtl_clear_bp(tp); +} + static void r8152b_enable_eee(struct r8152 *tp) { - u32 ocp_data; + u32 ocp_data; ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); ocp_data |= EEE_RX_EN | EEE_TX_EN; @@ -1874,6 +2354,22 @@ static void r8152b_enable_eee(struct r8152 *tp) ocp_reg_write(tp, OCP_EEE_AR, 0x0000); } +static void r8153_enable_eee(struct r8152 *tp) +{ + u32 ocp_data; + u16 data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); + ocp_data |= EEE_RX_EN | EEE_TX_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); + data = ocp_reg_read(tp, OCP_EEE_CFG); + data |= EEE10_EN; + ocp_reg_write(tp, OCP_EEE_CFG, data); + data = ocp_reg_read(tp, OCP_EEE_CFG2); + data |= MY1000_EEE | MY100_EEE; + ocp_reg_write(tp, OCP_EEE_CFG2, data); +} + static void r8152b_enable_fc(struct r8152 *tp) { u16 anar; @@ -1909,7 +2405,7 @@ static void r8152b_init(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); - ocp_data &= ~RWSUME_INDICATE; + ocp_data &= ~RESUME_INDICATE; ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); r8152b_exit_oob(tp); @@ -1943,6 +2439,75 @@ static void r8152b_init(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); } +static void r8153_init(struct r8152 *tp) +{ + u32 ocp_data; + int i; + + r8153_u1u2en(tp, 0); + + for (i = 0; i < 500; i++) { + if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & + AUTOLOAD_DONE) + break; + msleep(20); + } + + for (i = 0; i < 500; i++) { + ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK; + if (ocp_data == PHY_STAT_LAN_ON || ocp_data == PHY_STAT_PWRDN) + break; + msleep(20); + } + + r8153_u2p3en(tp, 0); + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL); + ocp_data &= ~TIMER11_EN; + ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data); + + r8153_clear_bp(tp); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE); + ocp_data &= ~LED_MODE_MASK; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL); + ocp_data &= ~LPM_TIMER_MASK; + if (tp->udev->speed == USB_SPEED_SUPER) + ocp_data |= LPM_TIMER_500US; + else + ocp_data |= LPM_TIMER_500MS; + ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2); + ocp_data &= ~SEN_VAL_MASK; + ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE; + ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data); + + r8153_power_cut_en(tp, 0); + r8153_u1u2en(tp, 1); + + r8153_first_init(tp); + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, + PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN | + U1U2_SPDWN_EN | L1_SPDWN_EN); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, + PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN | + TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN | + EEE_SPDWN_EN); + + r8153_enable_eee(tp); + r8153_enable_aldps(tp); + r8152b_enable_fc(tp); + + r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE | + BMCR_ANRESTART); +} + static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) { struct r8152 *tp = usb_get_intfdata(intf); @@ -1956,7 +2521,7 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) tasklet_disable(&tp->tl); } - rtl8152_down(tp); + tp->rtl_ops.down(tp); return 0; } @@ -1965,10 +2530,12 @@ static int rtl8152_resume(struct usb_interface *intf) { struct r8152 *tp = usb_get_intfdata(intf); - r8152b_init(tp); + tp->rtl_ops.init(tp); netif_device_attach(tp->netdev); if (netif_running(tp->netdev)) { - rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL); + rtl8152_set_speed(tp, AUTONEG_ENABLE, + tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, + DUPLEX_FULL); tp->speed = 0; netif_carrier_off(tp->netdev); set_bit(WORK_ENABLE, &tp->flags); @@ -2072,6 +2639,18 @@ static void r8152b_get_version(struct r8152 *tp) case 0x4c10: tp->version = RTL_VER_02; break; + case 0x5c00: + tp->version = RTL_VER_03; + tp->mii.supports_gmii = 1; + break; + case 0x5c10: + tp->version = RTL_VER_04; + tp->mii.supports_gmii = 1; + break; + case 0x5c20: + tp->version = RTL_VER_05; + tp->mii.supports_gmii = 1; + break; default: netif_info(tp, probe, tp->netdev, "Unknown version 0x%04x\n", version); @@ -2079,6 +2658,80 @@ static void r8152b_get_version(struct r8152 *tp) } } +static void rtl8152_unload(struct r8152 *tp) +{ + u32 ocp_data; + + if (tp->version != RTL_VER_01) { + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); + ocp_data |= POWER_CUT; + ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); + } + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); + ocp_data &= ~RESUME_INDICATE; + ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); +} + +static void rtl8153_unload(struct r8152 *tp) +{ + r8153_power_cut_en(tp, 1); +} + +static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id) +{ + struct rtl_ops *ops = &tp->rtl_ops; + int ret = -ENODEV; + + switch (id->idVendor) { + case VENDOR_ID_REALTEK: + switch (id->idProduct) { + case PRODUCT_ID_RTL8152: + ops->init = r8152b_init; + ops->enable = rtl8152_enable; + ops->disable = rtl8152_disable; + ops->down = rtl8152_down; + ops->unload = rtl8152_unload; + ret = 0; + break; + case PRODUCT_ID_RTL8153: + ops->init = r8153_init; + ops->enable = rtl8153_enable; + ops->disable = rtl8152_disable; + ops->down = rtl8153_down; + ops->unload = rtl8153_unload; + ret = 0; + break; + default: + break; + } + break; + + case VENDOR_ID_SAMSUNG: + switch (id->idProduct) { + case PRODUCT_ID_SAMSUNG: + ops->init = r8153_init; + ops->enable = rtl8153_enable; + ops->disable = rtl8152_disable; + ops->down = rtl8153_down; + ops->unload = rtl8153_unload; + ret = 0; + break; + default: + break; + } + break; + + default: + break; + } + + if (ret) + netif_err(tp, probe, tp->netdev, "Unknown Device\n"); + + return ret; +} + static int rtl8152_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -2087,14 +2740,9 @@ static int rtl8152_probe(struct usb_interface *intf, struct net_device *netdev; int ret; - if (udev->actconfig->desc.bConfigurationValue != 1) { - usb_driver_set_configuration(udev, 1); - return -ENODEV; - } - netdev = alloc_etherdev(sizeof(struct r8152)); if (!netdev) { - dev_err(&intf->dev, "Out of memory"); + dev_err(&intf->dev, "Out of memory\n"); return -ENOMEM; } @@ -2102,12 +2750,17 @@ static int rtl8152_probe(struct usb_interface *intf, tp = netdev_priv(netdev); tp->msg_enable = 0x7FFF; - tasklet_init(&tp->tl, bottom_half, (unsigned long)tp); - INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); - tp->udev = udev; tp->netdev = netdev; tp->intf = intf; + + ret = rtl_ops_init(tp, id); + if (ret) + goto out; + + tasklet_init(&tp->tl, bottom_half, (unsigned long)tp); + INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); + netdev->netdev_ops = &rtl8152_netdev_ops; netdev->watchdog_timeo = RTL8152_TX_TIMEOUT; @@ -2124,7 +2777,7 @@ static int rtl8152_probe(struct usb_interface *intf, tp->mii.supports_gmii = 0; r8152b_get_version(tp); - r8152b_init(tp); + tp->rtl_ops.init(tp); set_ethernet_addr(tp); ret = alloc_all_mem(tp); @@ -2135,11 +2788,11 @@ static int rtl8152_probe(struct usb_interface *intf, ret = register_netdev(netdev); if (ret != 0) { - netif_err(tp, probe, netdev, "couldn't register the device"); + netif_err(tp, probe, netdev, "couldn't register the device\n"); goto out1; } - netif_info(tp, probe, netdev, "%s", DRIVER_VERSION); + netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION); return 0; @@ -2150,21 +2803,6 @@ out: return ret; } -static void rtl8152_unload(struct r8152 *tp) -{ - u32 ocp_data; - - if (tp->version != RTL_VER_01) { - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); - ocp_data |= POWER_CUT; - ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); - } - - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); - ocp_data &= ~RWSUME_INDICATE; - ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); -} - static void rtl8152_disconnect(struct usb_interface *intf) { struct r8152 *tp = usb_get_intfdata(intf); @@ -2174,7 +2812,7 @@ static void rtl8152_disconnect(struct usb_interface *intf) set_bit(RTL8152_UNPLUG, &tp->flags); tasklet_kill(&tp->tl); unregister_netdev(tp->netdev); - rtl8152_unload(tp); + tp->rtl_ops.unload(tp); free_all_mem(tp); free_netdev(tp->netdev); } @@ -2182,7 +2820,9 @@ static void rtl8152_disconnect(struct usb_interface *intf) /* table of devices that work with this driver */ static struct usb_device_id rtl8152_table[] = { - {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)}, + {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)}, + {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)}, + {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)}, {} }; |