diff options
Diffstat (limited to 'drivers/net/usb')
| -rw-r--r-- | drivers/net/usb/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/usb/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/usb/asix.h | 218 | ||||
| -rw-r--r-- | drivers/net/usb/asix_common.c | 631 | ||||
| -rw-r--r-- | drivers/net/usb/asix_devices.c (renamed from drivers/net/usb/asix.c) | 666 | ||||
| -rw-r--r-- | drivers/net/usb/ax88172a.c | 414 | ||||
| -rw-r--r-- | drivers/net/usb/cdc-phonet.c | 7 | ||||
| -rw-r--r-- | drivers/net/usb/cdc_ncm.c | 88 | ||||
| -rw-r--r-- | drivers/net/usb/kaweth.c | 2 | ||||
| -rw-r--r-- | drivers/net/usb/pegasus.c | 4 | ||||
| -rw-r--r-- | drivers/net/usb/qmi_wwan.c | 571 | ||||
| -rw-r--r-- | drivers/net/usb/sierra_net.c | 52 | ||||
| -rw-r--r-- | drivers/net/usb/smsc75xx.c | 4 | ||||
| -rw-r--r-- | drivers/net/usb/smsc95xx.c | 36 | ||||
| -rw-r--r-- | drivers/net/usb/usbnet.c | 79 |
15 files changed, 1660 insertions, 1114 deletions
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 833e32f8d63..c1ae76968f4 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -134,6 +134,7 @@ config USB_NET_AX8817X tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters" depends on USB_USBNET select CRC32 + select PHYLIB default y help This option adds support for ASIX AX88xxx based USB 2.0 diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index a2e2d72c52a..bf063008c1a 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB_PEGASUS) += pegasus.o obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o +asix-y := asix_devices.o asix_common.o ax88172a.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h new file mode 100644 index 00000000000..e889631161b --- /dev/null +++ b/drivers/net/usb/asix.h @@ -0,0 +1,218 @@ +/* + * ASIX AX8817X based USB 2.0 Ethernet Devices + * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> + * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> + * Copyright (C) 2006 James Painter <jamie.painter@iname.com> + * Copyright (c) 2002-2003 TiVo Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASIX_H +#define _ASIX_H + +// #define DEBUG // error path messages, extra info +// #define VERBOSE // more; success messages + +#include <linux/module.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/usbnet.h> +#include <linux/slab.h> +#include <linux/if_vlan.h> + +#define DRIVER_VERSION "22-Dec-2011" +#define DRIVER_NAME "asix" + +/* ASIX AX8817X based USB 2.0 Ethernet Devices */ + +#define AX_CMD_SET_SW_MII 0x06 +#define AX_CMD_READ_MII_REG 0x07 +#define AX_CMD_WRITE_MII_REG 0x08 +#define AX_CMD_SET_HW_MII 0x0a +#define AX_CMD_READ_EEPROM 0x0b +#define AX_CMD_WRITE_EEPROM 0x0c +#define AX_CMD_WRITE_ENABLE 0x0d +#define AX_CMD_WRITE_DISABLE 0x0e +#define AX_CMD_READ_RX_CTL 0x0f +#define AX_CMD_WRITE_RX_CTL 0x10 +#define AX_CMD_READ_IPG012 0x11 +#define AX_CMD_WRITE_IPG0 0x12 +#define AX_CMD_WRITE_IPG1 0x13 +#define AX_CMD_READ_NODE_ID 0x13 +#define AX_CMD_WRITE_NODE_ID 0x14 +#define AX_CMD_WRITE_IPG2 0x14 +#define AX_CMD_WRITE_MULTI_FILTER 0x16 +#define AX88172_CMD_READ_NODE_ID 0x17 +#define AX_CMD_READ_PHY_ID 0x19 +#define AX_CMD_READ_MEDIUM_STATUS 0x1a +#define AX_CMD_WRITE_MEDIUM_MODE 0x1b +#define AX_CMD_READ_MONITOR_MODE 0x1c +#define AX_CMD_WRITE_MONITOR_MODE 0x1d +#define AX_CMD_READ_GPIOS 0x1e +#define AX_CMD_WRITE_GPIOS 0x1f +#define AX_CMD_SW_RESET 0x20 +#define AX_CMD_SW_PHY_STATUS 0x21 +#define AX_CMD_SW_PHY_SELECT 0x22 + +#define AX_PHY_SELECT_MASK (BIT(3) | BIT(2)) +#define AX_PHY_SELECT_INTERNAL 0 +#define AX_PHY_SELECT_EXTERNAL BIT(2) + +#define AX_MONITOR_MODE 0x01 +#define AX_MONITOR_LINK 0x02 +#define AX_MONITOR_MAGIC 0x04 +#define AX_MONITOR_HSFS 0x10 + +/* AX88172 Medium Status Register values */ +#define AX88172_MEDIUM_FD 0x02 +#define AX88172_MEDIUM_TX 0x04 +#define AX88172_MEDIUM_FC 0x10 +#define AX88172_MEDIUM_DEFAULT \ + ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC ) + +#define AX_MCAST_FILTER_SIZE 8 +#define AX_MAX_MCAST 64 + +#define AX_SWRESET_CLEAR 0x00 +#define AX_SWRESET_RR 0x01 +#define AX_SWRESET_RT 0x02 +#define AX_SWRESET_PRTE 0x04 +#define AX_SWRESET_PRL 0x08 +#define AX_SWRESET_BZ 0x10 +#define AX_SWRESET_IPRL 0x20 +#define AX_SWRESET_IPPD 0x40 + +#define AX88772_IPG0_DEFAULT 0x15 +#define AX88772_IPG1_DEFAULT 0x0c +#define AX88772_IPG2_DEFAULT 0x12 + +/* AX88772 & AX88178 Medium Mode Register */ +#define AX_MEDIUM_PF 0x0080 +#define AX_MEDIUM_JFE 0x0040 +#define AX_MEDIUM_TFC 0x0020 +#define AX_MEDIUM_RFC 0x0010 +#define AX_MEDIUM_ENCK 0x0008 +#define AX_MEDIUM_AC 0x0004 +#define AX_MEDIUM_FD 0x0002 +#define AX_MEDIUM_GM 0x0001 +#define AX_MEDIUM_SM 0x1000 +#define AX_MEDIUM_SBP 0x0800 +#define AX_MEDIUM_PS 0x0200 +#define AX_MEDIUM_RE 0x0100 + +#define AX88178_MEDIUM_DEFAULT \ + (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \ + AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \ + AX_MEDIUM_RE) + +#define AX88772_MEDIUM_DEFAULT \ + (AX_MEDIUM_FD | AX_MEDIUM_RFC | \ + AX_MEDIUM_TFC | AX_MEDIUM_PS | \ + AX_MEDIUM_AC | AX_MEDIUM_RE) + +/* AX88772 & AX88178 RX_CTL values */ +#define AX_RX_CTL_SO 0x0080 +#define AX_RX_CTL_AP 0x0020 +#define AX_RX_CTL_AM 0x0010 +#define AX_RX_CTL_AB 0x0008 +#define AX_RX_CTL_SEP 0x0004 +#define AX_RX_CTL_AMALL 0x0002 +#define AX_RX_CTL_PRO 0x0001 +#define AX_RX_CTL_MFB_2048 0x0000 +#define AX_RX_CTL_MFB_4096 0x0100 +#define AX_RX_CTL_MFB_8192 0x0200 +#define AX_RX_CTL_MFB_16384 0x0300 + +#define AX_DEFAULT_RX_CTL (AX_RX_CTL_SO | AX_RX_CTL_AB) + +/* GPIO 0 .. 2 toggles */ +#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */ +#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */ +#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */ +#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */ +#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */ +#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */ +#define AX_GPIO_RESERVED 0x40 /* Reserved */ +#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ + +#define AX_EEPROM_MAGIC 0xdeadbeef +#define AX_EEPROM_LEN 0x200 + +/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ +struct asix_data { + u8 multi_filter[AX_MCAST_FILTER_SIZE]; + u8 mac_addr[ETH_ALEN]; + u8 phymode; + u8 ledmode; + u8 res; +}; + +int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data); + +int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data); + +void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, + u16 index, u16 size, void *data); + +int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb); + +struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags); + +int asix_set_sw_mii(struct usbnet *dev); +int asix_set_hw_mii(struct usbnet *dev); + +int asix_read_phy_addr(struct usbnet *dev, int internal); +int asix_get_phy_addr(struct usbnet *dev); + +int asix_sw_reset(struct usbnet *dev, u8 flags); + +u16 asix_read_rx_ctl(struct usbnet *dev); +int asix_write_rx_ctl(struct usbnet *dev, u16 mode); + +u16 asix_read_medium_status(struct usbnet *dev); +int asix_write_medium_mode(struct usbnet *dev, u16 mode); + +int asix_write_gpio(struct usbnet *dev, u16 value, int sleep); + +void asix_set_multicast(struct net_device *net); + +int asix_mdio_read(struct net_device *netdev, int phy_id, int loc); +void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val); + +void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo); +int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo); + +int asix_get_eeprom_len(struct net_device *net); +int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, + u8 *data); +int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, + u8 *data); + +void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info); + +int asix_set_mac_address(struct net_device *net, void *p); + +#endif /* _ASIX_H */ diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c new file mode 100644 index 00000000000..774d9ce2daf --- /dev/null +++ b/drivers/net/usb/asix_common.c @@ -0,0 +1,631 @@ +/* + * ASIX AX8817X based USB 2.0 Ethernet Devices + * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> + * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> + * Copyright (C) 2006 James Painter <jamie.painter@iname.com> + * Copyright (c) 2002-2003 TiVo Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "asix.h" + +int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + void *buf; + int err = -ENOMEM; + + netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + goto out; + + err = usb_control_msg( + dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + cmd, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + buf, + size, + USB_CTRL_GET_TIMEOUT); + if (err == size) + memcpy(data, buf, size); + else if (err >= 0) + err = -EINVAL; + kfree(buf); + +out: + return err; +} + +int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + void *buf = NULL; + int err = -ENOMEM; + + netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + if (data) { + buf = kmemdup(data, size, GFP_KERNEL); + if (!buf) + goto out; + } + + err = usb_control_msg( + dev->udev, + usb_sndctrlpipe(dev->udev, 0), + cmd, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + buf, + size, + USB_CTRL_SET_TIMEOUT); + kfree(buf); + +out: + return err; +} + +static void asix_async_cmd_callback(struct urb *urb) +{ + struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; + int status = urb->status; + + if (status < 0) + printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d", + status); + + kfree(req); + usb_free_urb(urb); +} + +void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + struct usb_ctrlrequest *req; + int status; + struct urb *urb; + + netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n"); + return; + } + + req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); + if (!req) { + netdev_err(dev->net, "Failed to allocate memory for control request\n"); + usb_free_urb(urb); + return; + } + + req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + req->bRequest = cmd; + req->wValue = cpu_to_le16(value); + req->wIndex = cpu_to_le16(index); + req->wLength = cpu_to_le16(size); + + usb_fill_control_urb(urb, dev->udev, + usb_sndctrlpipe(dev->udev, 0), + (void *)req, data, size, + asix_async_cmd_callback, req); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status < 0) { + netdev_err(dev->net, "Error submitting the control message: status=%d\n", + status); + kfree(req); + usb_free_urb(urb); + } +} + +int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int offset = 0; + + while (offset + sizeof(u32) < skb->len) { + struct sk_buff *ax_skb; + u16 size; + u32 header = get_unaligned_le32(skb->data + offset); + + offset += sizeof(u32); + + /* get the packet length */ + size = (u16) (header & 0x7ff); + if (size != ((~header >> 16) & 0x07ff)) { + netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n"); + return 0; + } + + if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || + (size + offset > skb->len)) { + netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n", + size); + return 0; + } + ax_skb = netdev_alloc_skb_ip_align(dev->net, size); + if (!ax_skb) + return 0; + + skb_put(ax_skb, size); + memcpy(ax_skb->data, skb->data + offset, size); + usbnet_skb_return(dev, ax_skb); + + offset += (size + 1) & 0xfffe; + } + + if (skb->len != offset) { + netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n", + skb->len); + return 0; + } + return 1; +} + +struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int padlen; + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + u32 packet_len; + u32 padbytes = 0xffff0000; + + padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; + + /* We need to push 4 bytes in front of frame (packet_len) + * and maybe add 4 bytes after the end (if padlen is 4) + * + * Avoid skb_copy_expand() expensive call, using following rules : + * - We are allowed to push 4 bytes in headroom if skb_header_cloned() + * is false (and if we have 4 bytes of headroom) + * - We are allowed to put 4 bytes at tail if skb_cloned() + * is false (and if we have 4 bytes of tailroom) + * + * TCP packets for example are cloned, but skb_header_release() + * was called in tcp stack, allowing us to use headroom for our needs. + */ + if (!skb_header_cloned(skb) && + !(padlen && skb_cloned(skb)) && + headroom + tailroom >= 4 + padlen) { + /* following should not happen, but better be safe */ + if (headroom < 4 || + tailroom < padlen) { + skb->data = memmove(skb->head + 4, skb->data, skb->len); + skb_set_tail_pointer(skb, skb->len); + } + } else { + struct sk_buff *skb2; + + skb2 = skb_copy_expand(skb, 4, padlen, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len; + skb_push(skb, 4); + cpu_to_le32s(&packet_len); + skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); + + if (padlen) { + cpu_to_le32s(&padbytes); + memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); + skb_put(skb, sizeof(padbytes)); + } + return skb; +} + +int asix_set_sw_mii(struct usbnet *dev) +{ + int ret; + ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable software MII access\n"); + return ret; +} + +int asix_set_hw_mii(struct usbnet *dev) +{ + int ret; + ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable hardware MII access\n"); + return ret; +} + +int asix_read_phy_addr(struct usbnet *dev, int internal) +{ + int offset = (internal ? 1 : 0); + u8 buf[2]; + int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); + + netdev_dbg(dev->net, "asix_get_phy_addr()\n"); + + if (ret < 0) { + netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret); + goto out; + } + netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", + *((__le16 *)buf)); + ret = buf[offset]; + +out: + return ret; +} + +int asix_get_phy_addr(struct usbnet *dev) +{ + /* return the address of the internal phy */ + return asix_read_phy_addr(dev, 1); +} + + +int asix_sw_reset(struct usbnet *dev, u8 flags) +{ + int ret; + + ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); + + return ret; +} + +u16 asix_read_rx_ctl(struct usbnet *dev) +{ + __le16 v; + int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v); + + if (ret < 0) { + netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); + goto out; + } + ret = le16_to_cpu(v); +out: + return ret; +} + +int asix_write_rx_ctl(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); + ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", + mode, ret); + + return ret; +} + +u16 asix_read_medium_status(struct usbnet *dev) +{ + __le16 v; + int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); + + if (ret < 0) { + netdev_err(dev->net, "Error reading Medium Status register: %02x\n", + ret); + return ret; /* TODO: callers not checking for error ret */ + } + + return le16_to_cpu(v); + +} + +int asix_write_medium_mode(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); + ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", + mode, ret); + + return ret; +} + +int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); + ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", + value, ret); + + if (sleep) + msleep(sleep); + + return ret; +} + +/* + * AX88772 & AX88178 have a 16-bit RX_CTL value + */ +void asix_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + u16 rx_ctl = AX_DEFAULT_RX_CTL; + + if (net->flags & IFF_PROMISC) { + rx_ctl |= AX_RX_CTL_PRO; + } else if (net->flags & IFF_ALLMULTI || + netdev_mc_count(net) > AX_MAX_MCAST) { + rx_ctl |= AX_RX_CTL_AMALL; + } else if (netdev_mc_empty(net)) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later */ + struct netdev_hw_addr *ha; + u32 crc_bits; + + memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + netdev_for_each_mc_addr(ha, net) { + crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, + AX_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= AX_RX_CTL_AM; + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) +{ + struct usbnet *dev = netdev_priv(netdev); + __le16 res; + + mutex_lock(&dev->phy_mutex); + asix_set_sw_mii(dev); + asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, + (__u16)loc, 2, &res); + asix_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); + + netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", + phy_id, loc, le16_to_cpu(res)); + + return le16_to_cpu(res); +} + +void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) +{ + struct usbnet *dev = netdev_priv(netdev); + __le16 res = cpu_to_le16(val); + + netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", + phy_id, loc, val); + mutex_lock(&dev->phy_mutex); + asix_set_sw_mii(dev); + asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); + asix_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); +} + +void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt; + + if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { + wolinfo->supported = 0; + wolinfo->wolopts = 0; + return; + } + wolinfo->supported = WAKE_PHY | WAKE_MAGIC; + wolinfo->wolopts = 0; + if (opt & AX_MONITOR_LINK) + wolinfo->wolopts |= WAKE_PHY; + if (opt & AX_MONITOR_MAGIC) + wolinfo->wolopts |= WAKE_MAGIC; +} + +int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt = 0; + + if (wolinfo->wolopts & WAKE_PHY) + opt |= AX_MONITOR_LINK; + if (wolinfo->wolopts & WAKE_MAGIC) + opt |= AX_MONITOR_MAGIC; + + if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, + opt, 0, 0, NULL) < 0) + return -EINVAL; + + return 0; +} + +int asix_get_eeprom_len(struct net_device *net) +{ + return AX_EEPROM_LEN; +} + +int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, + u8 *data) +{ + struct usbnet *dev = netdev_priv(net); + u16 *eeprom_buff; + int first_word, last_word; + int i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = AX_EEPROM_MAGIC; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1), + GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + /* ax8817x returns 2 bytes from eeprom on read */ + for (i = first_word; i <= last_word; i++) { + if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2, + &(eeprom_buff[i - first_word])) < 0) { + kfree(eeprom_buff); + return -EIO; + } + } + + memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); + kfree(eeprom_buff); + return 0; +} + +int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, + u8 *data) +{ + struct usbnet *dev = netdev_priv(net); + u16 *eeprom_buff; + int first_word, last_word; + int i; + int ret; + + netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n", + eeprom->len, eeprom->offset, eeprom->magic); + + if (eeprom->len == 0) + return -EINVAL; + + if (eeprom->magic != AX_EEPROM_MAGIC) + return -EINVAL; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1), + GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + /* align data to 16 bit boundaries, read the missing data from + the EEPROM */ + if (eeprom->offset & 1) { + ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2, + &(eeprom_buff[0])); + if (ret < 0) { + netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word); + goto free; + } + } + + if ((eeprom->offset + eeprom->len) & 1) { + ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2, + &(eeprom_buff[last_word - first_word])); + if (ret < 0) { + netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word); + goto free; + } + } + + memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len); + + /* write data to EEPROM */ + ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL); + if (ret < 0) { + netdev_err(net, "Failed to enable EEPROM write\n"); + goto free; + } + msleep(20); + + for (i = first_word; i <= last_word; i++) { + netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n", + i, eeprom_buff[i - first_word]); + ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i, + eeprom_buff[i - first_word], 0, NULL); + if (ret < 0) { + netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n", + i); + goto free; + } + msleep(20); + } + + ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL); + if (ret < 0) { + netdev_err(net, "Failed to disable EEPROM write\n"); + goto free; + } + + ret = 0; +free: + kfree(eeprom_buff); + return ret; +} + +void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) +{ + /* Inherit standard device info */ + usbnet_get_drvinfo(net, info); + strncpy (info->driver, DRIVER_NAME, sizeof info->driver); + strncpy (info->version, DRIVER_VERSION, sizeof info->version); + info->eedump_len = AX_EEPROM_LEN; +} + +int asix_set_mac_address(struct net_device *net, void *p) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + struct sockaddr *addr = p; + + if (netif_running(net)) + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); + + /* We use the 20 byte dev->data + * for our 6 byte mac buffer + * to avoid allocating memory that + * is tricky to free later */ + memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); + asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + + return 0; +} diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix_devices.c index 3ae80eccd0e..4fd48df6b98 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix_devices.c @@ -20,137 +20,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -// #define DEBUG // error path messages, extra info -// #define VERBOSE // more; success messages - -#include <linux/module.h> -#include <linux/kmod.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> -#include <linux/workqueue.h> -#include <linux/mii.h> -#include <linux/usb.h> -#include <linux/crc32.h> -#include <linux/usb/usbnet.h> -#include <linux/slab.h> -#include <linux/if_vlan.h> - -#define DRIVER_VERSION "22-Dec-2011" -#define DRIVER_NAME "asix" - -/* ASIX AX8817X based USB 2.0 Ethernet Devices */ - -#define AX_CMD_SET_SW_MII 0x06 -#define AX_CMD_READ_MII_REG 0x07 -#define AX_CMD_WRITE_MII_REG 0x08 -#define AX_CMD_SET_HW_MII 0x0a -#define AX_CMD_READ_EEPROM 0x0b -#define AX_CMD_WRITE_EEPROM 0x0c -#define AX_CMD_WRITE_ENABLE 0x0d -#define AX_CMD_WRITE_DISABLE 0x0e -#define AX_CMD_READ_RX_CTL 0x0f -#define AX_CMD_WRITE_RX_CTL 0x10 -#define AX_CMD_READ_IPG012 0x11 -#define AX_CMD_WRITE_IPG0 0x12 -#define AX_CMD_WRITE_IPG1 0x13 -#define AX_CMD_READ_NODE_ID 0x13 -#define AX_CMD_WRITE_NODE_ID 0x14 -#define AX_CMD_WRITE_IPG2 0x14 -#define AX_CMD_WRITE_MULTI_FILTER 0x16 -#define AX88172_CMD_READ_NODE_ID 0x17 -#define AX_CMD_READ_PHY_ID 0x19 -#define AX_CMD_READ_MEDIUM_STATUS 0x1a -#define AX_CMD_WRITE_MEDIUM_MODE 0x1b -#define AX_CMD_READ_MONITOR_MODE 0x1c -#define AX_CMD_WRITE_MONITOR_MODE 0x1d -#define AX_CMD_READ_GPIOS 0x1e -#define AX_CMD_WRITE_GPIOS 0x1f -#define AX_CMD_SW_RESET 0x20 -#define AX_CMD_SW_PHY_STATUS 0x21 -#define AX_CMD_SW_PHY_SELECT 0x22 - -#define AX_MONITOR_MODE 0x01 -#define AX_MONITOR_LINK 0x02 -#define AX_MONITOR_MAGIC 0x04 -#define AX_MONITOR_HSFS 0x10 - -/* AX88172 Medium Status Register values */ -#define AX88172_MEDIUM_FD 0x02 -#define AX88172_MEDIUM_TX 0x04 -#define AX88172_MEDIUM_FC 0x10 -#define AX88172_MEDIUM_DEFAULT \ - ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC ) - -#define AX_MCAST_FILTER_SIZE 8 -#define AX_MAX_MCAST 64 - -#define AX_SWRESET_CLEAR 0x00 -#define AX_SWRESET_RR 0x01 -#define AX_SWRESET_RT 0x02 -#define AX_SWRESET_PRTE 0x04 -#define AX_SWRESET_PRL 0x08 -#define AX_SWRESET_BZ 0x10 -#define AX_SWRESET_IPRL 0x20 -#define AX_SWRESET_IPPD 0x40 - -#define AX88772_IPG0_DEFAULT 0x15 -#define AX88772_IPG1_DEFAULT 0x0c -#define AX88772_IPG2_DEFAULT 0x12 - -/* AX88772 & AX88178 Medium Mode Register */ -#define AX_MEDIUM_PF 0x0080 -#define AX_MEDIUM_JFE 0x0040 -#define AX_MEDIUM_TFC 0x0020 -#define AX_MEDIUM_RFC 0x0010 -#define AX_MEDIUM_ENCK 0x0008 -#define AX_MEDIUM_AC 0x0004 -#define AX_MEDIUM_FD 0x0002 -#define AX_MEDIUM_GM 0x0001 -#define AX_MEDIUM_SM 0x1000 -#define AX_MEDIUM_SBP 0x0800 -#define AX_MEDIUM_PS 0x0200 -#define AX_MEDIUM_RE 0x0100 - -#define AX88178_MEDIUM_DEFAULT \ - (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \ - AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \ - AX_MEDIUM_RE) - -#define AX88772_MEDIUM_DEFAULT \ - (AX_MEDIUM_FD | AX_MEDIUM_RFC | \ - AX_MEDIUM_TFC | AX_MEDIUM_PS | \ - AX_MEDIUM_AC | AX_MEDIUM_RE) - -/* AX88772 & AX88178 RX_CTL values */ -#define AX_RX_CTL_SO 0x0080 -#define AX_RX_CTL_AP 0x0020 -#define AX_RX_CTL_AM 0x0010 -#define AX_RX_CTL_AB 0x0008 -#define AX_RX_CTL_SEP 0x0004 -#define AX_RX_CTL_AMALL 0x0002 -#define AX_RX_CTL_PRO 0x0001 -#define AX_RX_CTL_MFB_2048 0x0000 -#define AX_RX_CTL_MFB_4096 0x0100 -#define AX_RX_CTL_MFB_8192 0x0200 -#define AX_RX_CTL_MFB_16384 0x0300 - -#define AX_DEFAULT_RX_CTL (AX_RX_CTL_SO | AX_RX_CTL_AB) - -/* GPIO 0 .. 2 toggles */ -#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */ -#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */ -#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */ -#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */ -#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */ -#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */ -#define AX_GPIO_RESERVED 0x40 /* Reserved */ -#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ - -#define AX_EEPROM_MAGIC 0xdeadbeef -#define AX88172_EEPROM_LEN 0x40 -#define AX88772_EEPROM_LEN 0xff +#include "asix.h" #define PHY_MODE_MARVELL 0x0000 #define MII_MARVELL_LED_CTRL 0x0018 @@ -166,15 +36,6 @@ #define PHY_MODE_RTL8211CL 0x000C -/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ -struct asix_data { - u8 multi_filter[AX_MCAST_FILTER_SIZE]; - u8 mac_addr[ETH_ALEN]; - u8 phymode; - u8 ledmode; - u8 eeprom_len; -}; - struct ax88172_int_data { __le16 res1; u8 link; @@ -183,209 +44,6 @@ struct ax88172_int_data { __le16 res3; } __packed; -static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - void *buf; - int err = -ENOMEM; - - netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - buf = kmalloc(size, GFP_KERNEL); - if (!buf) - goto out; - - err = usb_control_msg( - dev->udev, - usb_rcvctrlpipe(dev->udev, 0), - cmd, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, - index, - buf, - size, - USB_CTRL_GET_TIMEOUT); - if (err == size) - memcpy(data, buf, size); - else if (err >= 0) - err = -EINVAL; - kfree(buf); - -out: - return err; -} - -static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - void *buf = NULL; - int err = -ENOMEM; - - netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - if (data) { - buf = kmemdup(data, size, GFP_KERNEL); - if (!buf) - goto out; - } - - err = usb_control_msg( - dev->udev, - usb_sndctrlpipe(dev->udev, 0), - cmd, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, - index, - buf, - size, - USB_CTRL_SET_TIMEOUT); - kfree(buf); - -out: - return err; -} - -static void asix_async_cmd_callback(struct urb *urb) -{ - struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; - int status = urb->status; - - if (status < 0) - printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d", - status); - - kfree(req); - usb_free_urb(urb); -} - -static void -asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - struct usb_ctrlrequest *req; - int status; - struct urb *urb; - - netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n"); - return; - } - - req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); - if (!req) { - netdev_err(dev->net, "Failed to allocate memory for control request\n"); - usb_free_urb(urb); - return; - } - - req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; - req->bRequest = cmd; - req->wValue = cpu_to_le16(value); - req->wIndex = cpu_to_le16(index); - req->wLength = cpu_to_le16(size); - - usb_fill_control_urb(urb, dev->udev, - usb_sndctrlpipe(dev->udev, 0), - (void *)req, data, size, - asix_async_cmd_callback, req); - - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status < 0) { - netdev_err(dev->net, "Error submitting the control message: status=%d\n", - status); - kfree(req); - usb_free_urb(urb); - } -} - -static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) -{ - int offset = 0; - - while (offset + sizeof(u32) < skb->len) { - struct sk_buff *ax_skb; - u16 size; - u32 header = get_unaligned_le32(skb->data + offset); - - offset += sizeof(u32); - - /* get the packet length */ - size = (u16) (header & 0x7ff); - if (size != ((~header >> 16) & 0x07ff)) { - netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n"); - return 0; - } - - if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || - (size + offset > skb->len)) { - netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n", - size); - return 0; - } - ax_skb = netdev_alloc_skb_ip_align(dev->net, size); - if (!ax_skb) - return 0; - - skb_put(ax_skb, size); - memcpy(ax_skb->data, skb->data + offset, size); - usbnet_skb_return(dev, ax_skb); - - offset += (size + 1) & 0xfffe; - } - - if (skb->len != offset) { - netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n", - skb->len); - return 0; - } - return 1; -} - -static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, - gfp_t flags) -{ - int padlen; - int headroom = skb_headroom(skb); - int tailroom = skb_tailroom(skb); - u32 packet_len; - u32 padbytes = 0xffff0000; - - padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; - - if ((!skb_cloned(skb)) && - ((headroom + tailroom) >= (4 + padlen))) { - if ((headroom < 4) || (tailroom < padlen)) { - skb->data = memmove(skb->head + 4, skb->data, skb->len); - skb_set_tail_pointer(skb, skb->len); - } - } else { - struct sk_buff *skb2; - skb2 = skb_copy_expand(skb, 4, padlen, flags); - dev_kfree_skb_any(skb); - skb = skb2; - if (!skb) - return NULL; - } - - skb_push(skb, 4); - packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4); - cpu_to_le32s(&packet_len); - skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); - - if (padlen) { - cpu_to_le32s(&padbytes); - memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); - skb_put(skb, sizeof(padbytes)); - } - return skb; -} - static void asix_status(struct usbnet *dev, struct urb *urb) { struct ax88172_int_data *event; @@ -406,200 +64,6 @@ static void asix_status(struct usbnet *dev, struct urb *urb) } } -static inline int asix_set_sw_mii(struct usbnet *dev) -{ - int ret; - ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to enable software MII access\n"); - return ret; -} - -static inline int asix_set_hw_mii(struct usbnet *dev) -{ - int ret; - ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to enable hardware MII access\n"); - return ret; -} - -static inline int asix_get_phy_addr(struct usbnet *dev) -{ - u8 buf[2]; - int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); - - netdev_dbg(dev->net, "asix_get_phy_addr()\n"); - - if (ret < 0) { - netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret); - goto out; - } - netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", - *((__le16 *)buf)); - ret = buf[1]; - -out: - return ret; -} - -static int asix_sw_reset(struct usbnet *dev, u8 flags) -{ - int ret; - - ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); - - return ret; -} - -static u16 asix_read_rx_ctl(struct usbnet *dev) -{ - __le16 v; - int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v); - - if (ret < 0) { - netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); - goto out; - } - ret = le16_to_cpu(v); -out: - return ret; -} - -static int asix_write_rx_ctl(struct usbnet *dev, u16 mode) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); - ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", - mode, ret); - - return ret; -} - -static u16 asix_read_medium_status(struct usbnet *dev) -{ - __le16 v; - int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); - - if (ret < 0) { - netdev_err(dev->net, "Error reading Medium Status register: %02x\n", - ret); - return ret; /* TODO: callers not checking for error ret */ - } - - return le16_to_cpu(v); - -} - -static int asix_write_medium_mode(struct usbnet *dev, u16 mode) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); - ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", - mode, ret); - - return ret; -} - -static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); - ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", - value, ret); - - if (sleep) - msleep(sleep); - - return ret; -} - -/* - * AX88772 & AX88178 have a 16-bit RX_CTL value - */ -static void asix_set_multicast(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - u16 rx_ctl = AX_DEFAULT_RX_CTL; - - if (net->flags & IFF_PROMISC) { - rx_ctl |= AX_RX_CTL_PRO; - } else if (net->flags & IFF_ALLMULTI || - netdev_mc_count(net) > AX_MAX_MCAST) { - rx_ctl |= AX_RX_CTL_AMALL; - } else if (netdev_mc_empty(net)) { - /* just broadcast and directed */ - } else { - /* We use the 20 byte dev->data - * for our 8 byte filter buffer - * to avoid allocating memory that - * is tricky to free later */ - struct netdev_hw_addr *ha; - u32 crc_bits; - - memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); - - /* Build the multicast hash filter. */ - netdev_for_each_mc_addr(ha, net) { - crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; - data->multi_filter[crc_bits >> 3] |= - 1 << (crc_bits & 7); - } - - asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, - AX_MCAST_FILTER_SIZE, data->multi_filter); - - rx_ctl |= AX_RX_CTL_AM; - } - - asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); -} - -static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) -{ - struct usbnet *dev = netdev_priv(netdev); - __le16 res; - - mutex_lock(&dev->phy_mutex); - asix_set_sw_mii(dev); - asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, - (__u16)loc, 2, &res); - asix_set_hw_mii(dev); - mutex_unlock(&dev->phy_mutex); - - netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", - phy_id, loc, le16_to_cpu(res)); - - return le16_to_cpu(res); -} - -static void -asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) -{ - struct usbnet *dev = netdev_priv(netdev); - __le16 res = cpu_to_le16(val); - - netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", - phy_id, loc, val); - mutex_lock(&dev->phy_mutex); - asix_set_sw_mii(dev); - asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); - asix_set_hw_mii(dev); - mutex_unlock(&dev->phy_mutex); -} - /* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ static u32 asix_get_phyid(struct usbnet *dev) { @@ -629,88 +93,6 @@ static u32 asix_get_phyid(struct usbnet *dev) return phy_id; } -static void -asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) -{ - struct usbnet *dev = netdev_priv(net); - u8 opt; - - if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { - wolinfo->supported = 0; - wolinfo->wolopts = 0; - return; - } - wolinfo->supported = WAKE_PHY | WAKE_MAGIC; - wolinfo->wolopts = 0; - if (opt & AX_MONITOR_LINK) - wolinfo->wolopts |= WAKE_PHY; - if (opt & AX_MONITOR_MAGIC) - wolinfo->wolopts |= WAKE_MAGIC; -} - -static int -asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) -{ - struct usbnet *dev = netdev_priv(net); - u8 opt = 0; - - if (wolinfo->wolopts & WAKE_PHY) - opt |= AX_MONITOR_LINK; - if (wolinfo->wolopts & WAKE_MAGIC) - opt |= AX_MONITOR_MAGIC; - - if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, - opt, 0, 0, NULL) < 0) - return -EINVAL; - - return 0; -} - -static int asix_get_eeprom_len(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - - return data->eeprom_len; -} - -static int asix_get_eeprom(struct net_device *net, - struct ethtool_eeprom *eeprom, u8 *data) -{ - struct usbnet *dev = netdev_priv(net); - __le16 *ebuf = (__le16 *)data; - int i; - - /* Crude hack to ensure that we don't overwrite memory - * if an odd length is supplied - */ - if (eeprom->len % 2) - return -EINVAL; - - eeprom->magic = AX_EEPROM_MAGIC; - - /* ax8817x returns 2 bytes from eeprom on read */ - for (i=0; i < eeprom->len / 2; i++) { - if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, - eeprom->offset + i, 0, 2, &ebuf[i]) < 0) - return -EINVAL; - } - return 0; -} - -static void asix_get_drvinfo (struct net_device *net, - struct ethtool_drvinfo *info) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - - /* Inherit standard device info */ - usbnet_get_drvinfo(net, info); - strncpy (info->driver, DRIVER_NAME, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - info->eedump_len = data->eeprom_len; -} - static u32 asix_get_link(struct net_device *net) { struct usbnet *dev = netdev_priv(net); @@ -725,30 +107,6 @@ static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); } -static int asix_set_mac_address(struct net_device *net, void *p) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - struct sockaddr *addr = p; - - if (netif_running(net)) - return -EBUSY; - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); - - /* We use the 20 byte dev->data - * for our 6 byte mac buffer - * to avoid allocating memory that - * is tricky to free later */ - memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); - asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); - - return 0; -} - /* We need to override some ethtool_ops so we require our own structure so we don't interfere with other usbnet devices that may be connected at the same time. */ @@ -761,6 +119,7 @@ static const struct ethtool_ops ax88172_ethtool_ops = { .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, + .set_eeprom = asix_set_eeprom, .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .nway_reset = usbnet_nway_reset, @@ -843,9 +202,6 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) u8 buf[ETH_ALEN]; int i; unsigned long gpio_bits = dev->driver_info->data; - struct asix_data *data = (struct asix_data *)&dev->data; - - data->eeprom_len = AX88172_EEPROM_LEN; usbnet_get_endpoints(dev,intf); @@ -880,6 +236,8 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->netdev_ops = &ax88172_netdev_ops; dev->net->ethtool_ops = &ax88172_ethtool_ops; + dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ + dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, @@ -901,6 +259,7 @@ static const struct ethtool_ops ax88772_ethtool_ops = { .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, + .set_eeprom = asix_set_eeprom, .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .nway_reset = usbnet_nway_reset, @@ -1049,12 +408,9 @@ static const struct net_device_ops ax88772_netdev_ops = { static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { int ret, embd_phy; - struct asix_data *data = (struct asix_data *)&dev->data; u8 buf[ETH_ALEN]; u32 phyid; - data->eeprom_len = AX88772_EEPROM_LEN; - usbnet_get_endpoints(dev,intf); /* Get the MAC address */ @@ -1075,6 +431,8 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->netdev_ops = &ax88772_netdev_ops; dev->net->ethtool_ops = &ax88772_ethtool_ops; + dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ + dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); @@ -1122,6 +480,7 @@ static const struct ethtool_ops ax88178_ethtool_ops = { .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, + .set_eeprom = asix_set_eeprom, .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .nway_reset = usbnet_nway_reset, @@ -1405,9 +764,6 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; u8 buf[ETH_ALEN]; - struct asix_data *data = (struct asix_data *)&dev->data; - - data->eeprom_len = AX88772_EEPROM_LEN; usbnet_get_endpoints(dev,intf); @@ -1510,6 +866,8 @@ static const struct driver_info ax88178_info = { .tx_fixup = asix_tx_fixup, }; +extern const struct driver_info ax88172a_info; + static const struct usb_device_id products [] = { { // Linksys USB200M @@ -1635,6 +993,10 @@ static const struct usb_device_id products [] = { // Asus USB Ethernet Adapter USB_DEVICE (0x0b95, 0x7e2b), .driver_info = (unsigned long) &ax88772_info, +}, { + /* ASIX 88172a demo board */ + USB_DEVICE(0x0b95, 0x172a), + .driver_info = (unsigned long) &ax88172a_info, }, { }, // END }; diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c new file mode 100644 index 00000000000..c8e0aa85fb8 --- /dev/null +++ b/drivers/net/usb/ax88172a.c @@ -0,0 +1,414 @@ +/* + * ASIX AX88172A based USB 2.0 Ethernet Devices + * Copyright (C) 2012 OMICRON electronics GmbH + * + * Supports external PHYs via phylib. Based on the driver for the + * AX88772. Original copyrights follow: + * + * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> + * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> + * Copyright (C) 2006 James Painter <jamie.painter@iname.com> + * Copyright (c) 2002-2003 TiVo Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "asix.h" +#include <linux/phy.h> + +struct ax88172a_private { + struct mii_bus *mdio; + struct phy_device *phydev; + char phy_name[20]; + u16 phy_addr; + u16 oldmode; + int use_embdphy; +}; + +/* MDIO read and write wrappers for phylib */ +static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum) +{ + return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id, + regnum); +} + +static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, + u16 val) +{ + asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val); + return 0; +} + +static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd) +{ + if (!netif_running(net)) + return -EINVAL; + + if (!net->phydev) + return -ENODEV; + + return phy_mii_ioctl(net->phydev, rq, cmd); +} + +/* set MAC link settings according to information from phylib */ +static void ax88172a_adjust_link(struct net_device *netdev) +{ + struct phy_device *phydev = netdev->phydev; + struct usbnet *dev = netdev_priv(netdev); + struct ax88172a_private *priv = dev->driver_priv; + u16 mode = 0; + + if (phydev->link) { + mode = AX88772_MEDIUM_DEFAULT; + + if (phydev->duplex == DUPLEX_HALF) + mode &= ~AX_MEDIUM_FD; + + if (phydev->speed != SPEED_100) + mode &= ~AX_MEDIUM_PS; + } + + if (mode != priv->oldmode) { + asix_write_medium_mode(dev, mode); + priv->oldmode = mode; + netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n", + phydev->speed, phydev->duplex, mode); + phy_print_status(phydev); + } +} + +static void ax88172a_status(struct usbnet *dev, struct urb *urb) +{ + /* link changes are detected by polling the phy */ +} + +/* use phylib infrastructure */ +static int ax88172a_init_mdio(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + int ret, i; + + priv->mdio = mdiobus_alloc(); + if (!priv->mdio) { + netdev_err(dev->net, "Could not allocate MDIO bus\n"); + return -ENOMEM; + } + + priv->mdio->priv = (void *)dev; + priv->mdio->read = &asix_mdio_bus_read; + priv->mdio->write = &asix_mdio_bus_write; + priv->mdio->name = "Asix MDIO Bus"; + /* mii bus name is usb-<usb bus number>-<usb device number> */ + snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d", + dev->udev->bus->busnum, dev->udev->devnum); + + priv->mdio->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!priv->mdio->irq) { + netdev_err(dev->net, "Could not allocate mdio->irq\n"); + ret = -ENOMEM; + goto mfree; + } + for (i = 0; i < PHY_MAX_ADDR; i++) + priv->mdio->irq[i] = PHY_POLL; + + ret = mdiobus_register(priv->mdio); + if (ret) { + netdev_err(dev->net, "Could not register MDIO bus\n"); + goto ifree; + } + + netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id); + return 0; + +ifree: + kfree(priv->mdio->irq); +mfree: + mdiobus_free(priv->mdio); + return ret; +} + +static void ax88172a_remove_mdio(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + + netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id); + mdiobus_unregister(priv->mdio); + kfree(priv->mdio->irq); + mdiobus_free(priv->mdio); +} + +static const struct net_device_ops ax88172a_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = asix_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = ax88172a_ioctl, + .ndo_set_rx_mode = asix_set_multicast, +}; + +int ax88172a_get_settings(struct net_device *net, struct ethtool_cmd *cmd) +{ + if (!net->phydev) + return -ENODEV; + + return phy_ethtool_gset(net->phydev, cmd); +} + +int ax88172a_set_settings(struct net_device *net, struct ethtool_cmd *cmd) +{ + if (!net->phydev) + return -ENODEV; + + return phy_ethtool_sset(net->phydev, cmd); +} + +int ax88172a_nway_reset(struct net_device *net) +{ + if (!net->phydev) + return -ENODEV; + + return phy_start_aneg(net->phydev); +} + +static const struct ethtool_ops ax88172a_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = usbnet_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .set_eeprom = asix_set_eeprom, + .get_settings = ax88172a_get_settings, + .set_settings = ax88172a_set_settings, + .nway_reset = ax88172a_nway_reset, +}; + +static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy) +{ + int ret; + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD); + if (ret < 0) + goto err; + + msleep(150); + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + goto err; + + msleep(150); + + ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD); + if (ret < 0) + goto err; + + return 0; + +err: + return ret; +} + + +static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + u8 buf[ETH_ALEN]; + struct ax88172a_private *priv; + + usbnet_get_endpoints(dev, intf); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + netdev_err(dev->net, "Could not allocate memory for private data\n"); + return -ENOMEM; + } + dev->driver_priv = priv; + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + netdev_err(dev->net, "Failed to read MAC address: %d\n", ret); + goto free; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + dev->net->netdev_ops = &ax88172a_netdev_ops; + dev->net->ethtool_ops = &ax88172a_ethtool_ops; + + /* are we using the internal or the external phy? */ + ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf); + if (ret < 0) { + netdev_err(dev->net, "Failed to read software interface selection register: %d\n", + ret); + goto free; + } + + netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]); + switch (buf[0] & AX_PHY_SELECT_MASK) { + case AX_PHY_SELECT_INTERNAL: + netdev_dbg(dev->net, "use internal phy\n"); + priv->use_embdphy = 1; + break; + case AX_PHY_SELECT_EXTERNAL: + netdev_dbg(dev->net, "use external phy\n"); + priv->use_embdphy = 0; + break; + default: + netdev_err(dev->net, "Interface mode not supported by driver\n"); + ret = -ENOTSUPP; + goto free; + } + + priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy); + ax88172a_reset_phy(dev, priv->use_embdphy); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } + + /* init MDIO bus */ + ret = ax88172a_init_mdio(dev); + if (ret) + goto free; + + return 0; + +free: + kfree(priv); + return ret; +} + +static int ax88172a_stop(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + + netdev_dbg(dev->net, "Stopping interface\n"); + + if (priv->phydev) { + netdev_info(dev->net, "Disconnecting from phy %s\n", + priv->phy_name); + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + } + + return 0; +} + +static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + struct ax88172a_private *priv = dev->driver_priv; + + ax88172a_remove_mdio(dev); + kfree(priv); +} + +static int ax88172a_reset(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + struct ax88172a_private *priv = dev->driver_priv; + int ret; + u16 rx_ctl; + + ax88172a_reset_phy(dev, priv->use_embdphy); + + msleep(150); + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = asix_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + msleep(150); + + ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, + AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, + AX88772_IPG2_DEFAULT, 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); + goto out; + } + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", + rx_ctl); + + rx_ctl = asix_read_medium_status(dev); + netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n", + rx_ctl); + + /* Connect to PHY */ + snprintf(priv->phy_name, 20, PHY_ID_FMT, + priv->mdio->id, priv->phy_addr); + + priv->phydev = phy_connect(dev->net, priv->phy_name, + &ax88172a_adjust_link, + 0, PHY_INTERFACE_MODE_MII); + if (IS_ERR(priv->phydev)) { + netdev_err(dev->net, "Could not connect to PHY device %s\n", + priv->phy_name); + ret = PTR_ERR(priv->phydev); + goto out; + } + + netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name); + + /* During power-up, the AX88172A set the power down (BMCR_PDOWN) + * bit of the PHY. Bring the PHY up again. + */ + genphy_resume(priv->phydev); + phy_start(priv->phydev); + + return 0; + +out: + return ret; + +} + +const struct driver_info ax88172a_info = { + .description = "ASIX AX88172A USB 2.0 Ethernet", + .bind = ax88172a_bind, + .reset = ax88172a_reset, + .stop = ax88172a_stop, + .unbind = ax88172a_unbind, + .status = ax88172a_status, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | + FLAG_MULTI_PACKET, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index d848d4dd575..7d78669000d 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -130,7 +130,7 @@ static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags) struct page *page; int err; - page = alloc_page(gfp_flags); + page = __skb_alloc_page(gfp_flags | __GFP_NOMEMALLOC, NULL); if (!page) return -ENOMEM; @@ -232,6 +232,7 @@ static int usbpn_open(struct net_device *dev) struct urb *req = usb_alloc_urb(0, GFP_KERNEL); if (!req || rx_submit(pnd, req, GFP_KERNEL | __GFP_COLD)) { + usb_free_urb(req); usbpn_close(dev); return -ENOMEM; } @@ -394,7 +395,7 @@ int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id) SET_NETDEV_DEV(dev, &intf->dev); pnd->dev = dev; - pnd->usb = usb_get_dev(usbdev); + pnd->usb = usbdev; pnd->intf = intf; pnd->data_intf = data_intf; spin_lock_init(&pnd->tx_lock); @@ -440,7 +441,6 @@ out: static void usbpn_disconnect(struct usb_interface *intf) { struct usbpn_dev *pnd = usb_get_intfdata(intf); - struct usb_device *usb = pnd->usb; if (pnd->disconnected) return; @@ -449,7 +449,6 @@ static void usbpn_disconnect(struct usb_interface *intf) usb_driver_release_interface(&usbpn_driver, (pnd->intf == intf) ? pnd->data_intf : pnd->intf); unregister_netdev(pnd->dev); - usb_put_dev(usb); } static struct usb_driver usbpn_driver = { diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 4b9513fcf27..4cd582a4f62 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -138,20 +138,7 @@ struct cdc_ncm_ctx { static void cdc_ncm_txpath_bh(unsigned long param); static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx); static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer); -static const struct driver_info cdc_ncm_info; static struct usb_driver cdc_ncm_driver; -static const struct ethtool_ops cdc_ncm_ethtool_ops; - -static const struct usb_device_id cdc_devs[] = { - { USB_INTERFACE_INFO(USB_CLASS_COMM, - USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), - .driver_info = (unsigned long)&cdc_ncm_info, - }, - { - }, -}; - -MODULE_DEVICE_TABLE(usb, cdc_devs); static void cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) @@ -454,6 +441,16 @@ static void cdc_ncm_free(struct cdc_ncm_ctx *ctx) kfree(ctx); } +static const struct ethtool_ops cdc_ncm_ethtool_ops = { + .get_drvinfo = cdc_ncm_get_drvinfo, + .get_link = usbnet_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) { struct cdc_ncm_ctx *ctx; @@ -1203,6 +1200,61 @@ static const struct driver_info cdc_ncm_info = { .tx_fixup = cdc_ncm_tx_fixup, }; +/* Same as cdc_ncm_info, but with FLAG_WWAN */ +static const struct driver_info wwan_info = { + .description = "Mobile Broadband Network Device", + .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET + | FLAG_WWAN, + .bind = cdc_ncm_bind, + .unbind = cdc_ncm_unbind, + .check_connect = cdc_ncm_check_connect, + .manage_power = cdc_ncm_manage_power, + .status = cdc_ncm_status, + .rx_fixup = cdc_ncm_rx_fixup, + .tx_fixup = cdc_ncm_tx_fixup, +}; + +static const struct usb_device_id cdc_devs[] = { + /* Ericsson MBM devices like F5521gw */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x0bdb, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + + /* Dell branded MBM devices like DW5550 */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x413c, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + + /* Toshiba branded MBM devices */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x0930, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + + /* Generic CDC-NCM devices */ + { USB_INTERFACE_INFO(USB_CLASS_COMM, + USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&cdc_ncm_info, + }, + { + }, +}; +MODULE_DEVICE_TABLE(usb, cdc_devs); + static struct usb_driver cdc_ncm_driver = { .name = "cdc_ncm", .id_table = cdc_devs, @@ -1215,16 +1267,6 @@ static struct usb_driver cdc_ncm_driver = { .disable_hub_initiated_lpm = 1, }; -static const struct ethtool_ops cdc_ncm_ethtool_ops = { - .get_drvinfo = cdc_ncm_get_drvinfo, - .get_link = usbnet_get_link, - .get_msglevel = usbnet_get_msglevel, - .set_msglevel = usbnet_set_msglevel, - .get_settings = usbnet_get_settings, - .set_settings = usbnet_set_settings, - .nway_reset = usbnet_nway_reset, -}; - module_usb_driver(cdc_ncm_driver); MODULE_AUTHOR("Hans Petter Selasky"); diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index d8ad5528438..c3d03490c97 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -1314,7 +1314,7 @@ static int kaweth_internal_control_msg(struct usb_device *usb_dev, int retv; int length = 0; /* shut up GCC */ - urb = usb_alloc_urb(0, GFP_NOIO); + urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) return -ENOMEM; diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 7023220456c..a0b5807b30d 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1329,8 +1329,6 @@ static int pegasus_probe(struct usb_interface *intf, } pegasus_count++; - usb_get_dev(dev); - net = alloc_etherdev(sizeof(struct pegasus)); if (!net) goto out; @@ -1407,7 +1405,6 @@ out2: out1: free_netdev(net); out: - usb_put_dev(dev); pegasus_dec_workqueue(); return res; } @@ -1425,7 +1422,6 @@ static void pegasus_disconnect(struct usb_interface *intf) pegasus->flags |= PEGASUS_UNPLUG; cancel_delayed_work(&pegasus->carrier_check); unregister_netdev(pegasus->net); - usb_put_dev(interface_to_usbdev(intf)); unlink_all_urbs(pegasus); free_all_urbs(pegasus); free_skb_pool(pegasus); diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index a051cedd64b..adfab3fc547 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1,6 +1,10 @@ /* * Copyright (c) 2012 Bjørn Mork <bjorn@mork.no> * + * The probing code is heavily inspired by cdc_ether, which is: + * Copyright (C) 2003-2005 by David Brownell + * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync) + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. @@ -15,11 +19,7 @@ #include <linux/usb/usbnet.h> #include <linux/usb/cdc-wdm.h> -/* The name of the CDC Device Management driver */ -#define DM_DRIVER "cdc_wdm" - -/* - * This driver supports wwan (3G/LTE/?) devices using a vendor +/* This driver supports wwan (3G/LTE/?) devices using a vendor * specific management protocol called Qualcomm MSM Interface (QMI) - * in addition to the more common AT commands over serial interface * management @@ -31,59 +31,117 @@ * management protocol is used in place of the standard CDC * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE * + * Alternatively, control and data functions can be combined in a + * single USB interface. + * * Handling a protocol like QMI is out of the scope for any driver. - * It can be exported as a character device using the cdc-wdm driver, - * which will enable userspace applications ("modem managers") to - * handle it. This may be required to use the network interface - * provided by the driver. + * It is exported as a character device using the cdc-wdm driver as + * a subdriver, enabling userspace applications ("modem managers") to + * handle it. * * These devices may alternatively/additionally be configured using AT - * commands on any of the serial interfaces driven by the option driver - * - * This driver binds only to the data ("slave") interface to enable - * the cdc-wdm driver to bind to the control interface. It still - * parses the CDC functional descriptors on the control interface to - * a) verify that this is indeed a handled interface (CDC Union - * header lists it as slave) - * b) get MAC address and other ethernet config from the CDC Ethernet - * header - * c) enable user bind requests against the control interface, which - * is the common way to bind to CDC Ethernet Control Model type - * interfaces - * d) provide a hint to the user about which interface is the - * corresponding management interface + * commands on a serial interface */ +/* driver specific data */ +struct qmi_wwan_state { + struct usb_driver *subdriver; + atomic_t pmcount; + unsigned long unused; + struct usb_interface *control; + struct usb_interface *data; +}; + +/* using a counter to merge subdriver requests with our own into a combined state */ +static int qmi_wwan_manage_power(struct usbnet *dev, int on) +{ + struct qmi_wwan_state *info = (void *)&dev->data; + int rv = 0; + + dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on); + + if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) { + /* need autopm_get/put here to ensure the usbcore sees the new value */ + rv = usb_autopm_get_interface(dev->intf); + if (rv < 0) + goto err; + dev->intf->needs_remote_wakeup = on; + usb_autopm_put_interface(dev->intf); + } +err: + return rv; +} + +static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on) +{ + struct usbnet *dev = usb_get_intfdata(intf); + + /* can be called while disconnecting */ + if (!dev) + return 0; + return qmi_wwan_manage_power(dev, on); +} + +/* collect all three endpoints and register subdriver */ +static int qmi_wwan_register_subdriver(struct usbnet *dev) +{ + int rv; + struct usb_driver *subdriver = NULL; + struct qmi_wwan_state *info = (void *)&dev->data; + + /* collect bulk endpoints */ + rv = usbnet_get_endpoints(dev, info->data); + if (rv < 0) + goto err; + + /* update status endpoint if separate control interface */ + if (info->control != info->data) + dev->status = &info->control->cur_altsetting->endpoint[0]; + + /* require interrupt endpoint for subdriver */ + if (!dev->status) { + rv = -EINVAL; + goto err; + } + + /* for subdriver power management */ + atomic_set(&info->pmcount, 0); + + /* register subdriver */ + subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power); + if (IS_ERR(subdriver)) { + dev_err(&info->control->dev, "subdriver registration failed\n"); + rv = PTR_ERR(subdriver); + goto err; + } + + /* prevent usbnet from using status endpoint */ + dev->status = NULL; + + /* save subdriver struct for suspend/resume wrappers */ + info->subdriver = subdriver; + +err: + return rv; +} + static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) { int status = -1; - struct usb_interface *control = NULL; u8 *buf = intf->cur_altsetting->extra; int len = intf->cur_altsetting->extralen; struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc; struct usb_cdc_union_desc *cdc_union = NULL; struct usb_cdc_ether_desc *cdc_ether = NULL; - u32 required = 1 << USB_CDC_HEADER_TYPE | 1 << USB_CDC_UNION_TYPE; u32 found = 0; - atomic_t *pmcount = (void *)&dev->data[1]; - - atomic_set(pmcount, 0); + struct usb_driver *driver = driver_of(intf); + struct qmi_wwan_state *info = (void *)&dev->data; - /* - * assume a data interface has no additional descriptors and - * that the control and data interface are numbered - * consecutively - this holds for the Huawei device at least - */ - if (len == 0 && desc->bInterfaceNumber > 0) { - control = usb_ifnum_to_if(dev->udev, desc->bInterfaceNumber - 1); - if (!control) - goto err; + BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < sizeof(struct qmi_wwan_state))); - buf = control->cur_altsetting->extra; - len = control->cur_altsetting->extralen; - dev_dbg(&intf->dev, "guessing \"control\" => %s, \"data\" => this\n", - dev_name(&control->dev)); - } + /* require a single interrupt status endpoint for subdriver */ + if (intf->cur_altsetting->desc.bNumEndpoints != 1) + goto err; while (len > 3) { struct usb_descriptor_header *h = (void *)buf; @@ -142,15 +200,23 @@ next_desc: } /* did we find all the required ones? */ - if ((found & required) != required) { + if (!(found & (1 << USB_CDC_HEADER_TYPE)) || + !(found & (1 << USB_CDC_UNION_TYPE))) { dev_err(&intf->dev, "CDC functional descriptors missing\n"); goto err; } - /* give the user a helpful hint if trying to bind to the wrong interface */ - if (cdc_union && desc->bInterfaceNumber == cdc_union->bMasterInterface0) { - dev_err(&intf->dev, "leaving \"control\" interface for " DM_DRIVER " - try binding to %s instead!\n", - dev_name(&usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0)->dev)); + /* verify CDC Union */ + if (desc->bInterfaceNumber != cdc_union->bMasterInterface0) { + dev_err(&intf->dev, "bogus CDC Union: master=%u\n", cdc_union->bMasterInterface0); + goto err; + } + + /* need to save these for unbind */ + info->control = intf; + info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0); + if (!info->data) { + dev_err(&intf->dev, "bogus CDC Union: slave=%u\n", cdc_union->bSlaveInterface0); goto err; } @@ -160,115 +226,59 @@ next_desc: usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress); } - /* success! point the user to the management interface */ - if (control) - dev_info(&intf->dev, "Use \"" DM_DRIVER "\" for QMI interface %s\n", - dev_name(&control->dev)); - - /* XXX: add a sysfs symlink somewhere to help management applications find it? */ + /* claim data interface and set it up */ + status = usb_driver_claim_interface(driver, info->data, dev); + if (status < 0) + goto err; - /* collect bulk endpoints now that we know intf == "data" interface */ - status = usbnet_get_endpoints(dev, intf); + status = qmi_wwan_register_subdriver(dev); + if (status < 0) { + usb_set_intfdata(info->data, NULL); + usb_driver_release_interface(driver, info->data); + } err: return status; } -/* using a counter to merge subdriver requests with our own into a combined state */ -static int qmi_wwan_manage_power(struct usbnet *dev, int on) -{ - atomic_t *pmcount = (void *)&dev->data[1]; - int rv = 0; - - dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(pmcount), on); - - if ((on && atomic_add_return(1, pmcount) == 1) || (!on && atomic_dec_and_test(pmcount))) { - /* need autopm_get/put here to ensure the usbcore sees the new value */ - rv = usb_autopm_get_interface(dev->intf); - if (rv < 0) - goto err; - dev->intf->needs_remote_wakeup = on; - usb_autopm_put_interface(dev->intf); - } -err: - return rv; -} - -static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on) -{ - struct usbnet *dev = usb_get_intfdata(intf); - - /* can be called while disconnecting */ - if (!dev) - return 0; - return qmi_wwan_manage_power(dev, on); -} - /* Some devices combine the "control" and "data" functions into a * single interface with all three endpoints: interrupt + bulk in and * out - * - * Setting up cdc-wdm as a subdriver owning the interrupt endpoint - * will let it provide userspace access to the encapsulated QMI - * protocol without interfering with the usbnet operations. - */ + */ static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf) { - int rv; - struct usb_driver *subdriver = NULL; - atomic_t *pmcount = (void *)&dev->data[1]; - - /* ZTE makes devices where the interface descriptors and endpoint - * configurations of two or more interfaces are identical, even - * though the functions are completely different. If set, then - * driver_info->data is a bitmap of acceptable interface numbers - * allowing us to bind to one such interface without binding to - * all of them - */ - if (dev->driver_info->data && - !test_bit(intf->cur_altsetting->desc.bInterfaceNumber, &dev->driver_info->data)) { - dev_info(&intf->dev, "not on our whitelist - ignored"); - rv = -ENODEV; - goto err; - } + struct qmi_wwan_state *info = (void *)&dev->data; - atomic_set(pmcount, 0); - - /* collect all three endpoints */ - rv = usbnet_get_endpoints(dev, intf); - if (rv < 0) - goto err; - - /* require interrupt endpoint for subdriver */ - if (!dev->status) { - rv = -EINVAL; - goto err; - } - - subdriver = usb_cdc_wdm_register(intf, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power); - if (IS_ERR(subdriver)) { - rv = PTR_ERR(subdriver); - goto err; - } - - /* can't let usbnet use the interrupt endpoint */ - dev->status = NULL; - - /* save subdriver struct for suspend/resume wrappers */ - dev->data[0] = (unsigned long)subdriver; - -err: - return rv; + /* control and data is shared */ + info->control = intf; + info->data = intf; + return qmi_wwan_register_subdriver(dev); } -static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf) +static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf) { - struct usb_driver *subdriver = (void *)dev->data[0]; - - if (subdriver && subdriver->disconnect) - subdriver->disconnect(intf); + struct qmi_wwan_state *info = (void *)&dev->data; + struct usb_driver *driver = driver_of(intf); + struct usb_interface *other; + + if (info->subdriver && info->subdriver->disconnect) + info->subdriver->disconnect(info->control); + + /* allow user to unbind using either control or data */ + if (intf == info->control) + other = info->data; + else + other = info->control; + + /* only if not shared */ + if (other && intf != other) { + usb_set_intfdata(other, NULL); + usb_driver_release_interface(driver, other); + } - dev->data[0] = (unsigned long)NULL; + info->subdriver = NULL; + info->data = NULL; + info->control = NULL; } /* suspend/resume wrappers calling both usbnet and the cdc-wdm @@ -280,15 +290,15 @@ static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *int static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message) { struct usbnet *dev = usb_get_intfdata(intf); - struct usb_driver *subdriver = (void *)dev->data[0]; + struct qmi_wwan_state *info = (void *)&dev->data; int ret; ret = usbnet_suspend(intf, message); if (ret < 0) goto err; - if (subdriver && subdriver->suspend) - ret = subdriver->suspend(intf, message); + if (info->subdriver && info->subdriver->suspend) + ret = info->subdriver->suspend(intf, message); if (ret < 0) usbnet_resume(intf); err: @@ -298,235 +308,94 @@ err: static int qmi_wwan_resume(struct usb_interface *intf) { struct usbnet *dev = usb_get_intfdata(intf); - struct usb_driver *subdriver = (void *)dev->data[0]; + struct qmi_wwan_state *info = (void *)&dev->data; int ret = 0; - if (subdriver && subdriver->resume) - ret = subdriver->resume(intf); + if (info->subdriver && info->subdriver->resume) + ret = info->subdriver->resume(intf); if (ret < 0) goto err; ret = usbnet_resume(intf); - if (ret < 0 && subdriver && subdriver->resume && subdriver->suspend) - subdriver->suspend(intf, PMSG_SUSPEND); + if (ret < 0 && info->subdriver && info->subdriver->resume && info->subdriver->suspend) + info->subdriver->suspend(intf, PMSG_SUSPEND); err: return ret; } - static const struct driver_info qmi_wwan_info = { - .description = "QMI speaking wwan device", + .description = "WWAN/QMI device", .flags = FLAG_WWAN, .bind = qmi_wwan_bind, + .unbind = qmi_wwan_unbind, .manage_power = qmi_wwan_manage_power, }; static const struct driver_info qmi_wwan_shared = { - .description = "QMI speaking wwan device with combined interface", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind_shared, - .manage_power = qmi_wwan_manage_power, -}; - -static const struct driver_info qmi_wwan_force_int0 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind_shared, - .manage_power = qmi_wwan_manage_power, - .data = BIT(0), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int1 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind_shared, - .manage_power = qmi_wwan_manage_power, - .data = BIT(1), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int2 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind_shared, - .manage_power = qmi_wwan_manage_power, - .data = BIT(2), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int3 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind_shared, - .manage_power = qmi_wwan_manage_power, - .data = BIT(3), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int4 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind_shared, - .manage_power = qmi_wwan_manage_power, - .data = BIT(4), /* interface whitelist bitmap */ -}; - -/* Sierra Wireless provide equally useless interface descriptors - * Devices in QMI mode can be switched between two different - * configurations: - * a) USB interface #8 is QMI/wwan - * b) USB interfaces #8, #19 and #20 are QMI/wwan - * - * Both configurations provide a number of other interfaces (serial++), - * some of which have the same endpoint configuration as we expect, so - * a whitelist or blacklist is necessary. - * - * FIXME: The below whitelist should include BIT(20). It does not - * because I cannot get it to work... - */ -static const struct driver_info qmi_wwan_sierra = { - .description = "Sierra Wireless wwan/QMI device", + .description = "WWAN/QMI device", .flags = FLAG_WWAN, .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind_shared, + .unbind = qmi_wwan_unbind, .manage_power = qmi_wwan_manage_power, - .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ }; #define HUAWEI_VENDOR_ID 0x12D1 +/* map QMI/wwan function by a fixed interface number */ +#define QMI_FIXED_INTF(vend, prod, num) \ + USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \ + .driver_info = (unsigned long)&qmi_wwan_shared + /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ #define QMI_GOBI1K_DEVICE(vend, prod) \ - USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_force_int3 + QMI_FIXED_INTF(vend, prod, 3) -/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */ +/* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */ #define QMI_GOBI_DEVICE(vend, prod) \ - USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_force_int0 + QMI_FIXED_INTF(vend, prod, 0) static const struct usb_device_id products[] = { + /* 1. CDC ECM like devices match on the control interface */ { /* Huawei E392, E398 and possibly others sharing both device id and more... */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9), .driver_info = (unsigned long)&qmi_wwan_info, }, { /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 56, /* NOTE: This is the *slave* interface of the CDC Union! */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), .driver_info = (unsigned long)&qmi_wwan_info, }, - { /* Huawei E392, E398 and possibly others in "Windows mode" - * using a combined control and data interface without any CDC - * functional descriptors - */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 17, + + /* 2. Combined interface devices matching on class+protocol */ + { /* Huawei E392, E398 and possibly others in "Windows mode" */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), .driver_info = (unsigned long)&qmi_wwan_shared, }, { /* Pantech UML290 */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x106c, - .idProduct = 0x3718, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xf0, - .bInterfaceProtocol = 0xff, + USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, - { /* ZTE MF820D */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0167, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3520-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0055, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int1, - }, - { /* ZTE (Vodafone) K3565-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0063, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3570-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1008, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3571-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1010, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3765-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x2002, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K4505-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0104, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE MF60 */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1402, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int2, - }, - { /* Sierra Wireless MC77xx in QMI mode */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x1199, - .idProduct = 0x68a2, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_sierra, + { /* Pantech UML290 - newer firmware */ + USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), + .driver_info = (unsigned long)&qmi_wwan_shared, }, - /* Gobi 1000 devices */ + /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ + {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ + {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ + {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ + {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ + {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ + + /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ @@ -542,9 +411,11 @@ static const struct usb_device_id products[] = { {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ - /* Gobi 2000 and 3000 devices */ + /* 5. Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ + {QMI_GOBI_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */ {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */ @@ -552,6 +423,8 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */ {QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */ {QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */ + {QMI_GOBI_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ + {QMI_GOBI_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */ {QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ @@ -563,19 +436,41 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */ + {QMI_FIXED_INTF(0x1199, 0x9011, 5)}, /* alternate interface number!? */ {QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ + {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */ + {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */ + { } /* END */ }; MODULE_DEVICE_TABLE(usb, products); +static int qmi_wwan_probe(struct usb_interface *intf, const struct usb_device_id *prod) +{ + struct usb_device_id *id = (struct usb_device_id *)prod; + + /* Workaround to enable dynamic IDs. This disables usbnet + * blacklisting functionality. Which, if required, can be + * reimplemented here by using a magic "blacklist" value + * instead of 0 in the static device id table + */ + if (!id->driver_info) { + dev_dbg(&intf->dev, "setting defaults for dynamic device id\n"); + id->driver_info = (unsigned long)&qmi_wwan_shared; + } + + return usbnet_probe(intf, id); +} + static struct usb_driver qmi_wwan_driver = { .name = "qmi_wwan", .id_table = products, - .probe = usbnet_probe, + .probe = qmi_wwan_probe, .disconnect = usbnet_disconnect, .suspend = qmi_wwan_suspend, .resume = qmi_wwan_resume, @@ -584,17 +479,7 @@ static struct usb_driver qmi_wwan_driver = { .disable_hub_initiated_lpm = 1, }; -static int __init qmi_wwan_init(void) -{ - return usb_register(&qmi_wwan_driver); -} -module_init(qmi_wwan_init); - -static void __exit qmi_wwan_exit(void) -{ - usb_deregister(&qmi_wwan_driver); -} -module_exit(qmi_wwan_exit); +module_usb_driver(qmi_wwan_driver); MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>"); MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver"); diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index d75d1f56bec..7be49ea60b6 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -68,15 +68,8 @@ static atomic_t iface_counter = ATOMIC_INIT(0); */ #define SIERRA_NET_USBCTL_BUF_LEN 1024 -/* list of interface numbers - used for constructing interface lists */ -struct sierra_net_iface_info { - const u32 infolen; /* number of interface numbers on list */ - const u8 *ifaceinfo; /* pointer to the array holding the numbers */ -}; - struct sierra_net_info_data { u16 rx_urb_size; - struct sierra_net_iface_info whitelist; }; /* Private data structure */ @@ -637,21 +630,6 @@ static int sierra_net_change_mtu(struct net_device *net, int new_mtu) return usbnet_change_mtu(net, new_mtu); } -static int is_whitelisted(const u8 ifnum, - const struct sierra_net_iface_info *whitelist) -{ - if (whitelist) { - const u8 *list = whitelist->ifaceinfo; - int i; - - for (i = 0; i < whitelist->infolen; i++) { - if (list[i] == ifnum) - return 1; - } - } - return 0; -} - static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap) { int result = 0; @@ -706,11 +684,6 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) dev_dbg(&dev->udev->dev, "%s", __func__); ifacenum = intf->cur_altsetting->desc.bInterfaceNumber; - /* We only accept certain interfaces */ - if (!is_whitelisted(ifacenum, &data->whitelist)) { - dev_dbg(&dev->udev->dev, "Ignoring interface: %d", ifacenum); - return -ENODEV; - } numendpoints = intf->cur_altsetting->desc.bNumEndpoints; /* We have three endpoints, bulk in and out, and a status */ if (numendpoints != 3) { @@ -945,13 +918,8 @@ struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb, return NULL; } -static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 }; static const struct sierra_net_info_data sierra_net_info_data_direct_ip = { .rx_urb_size = 8 * 1024, - .whitelist = { - .infolen = ARRAY_SIZE(sierra_net_ifnum_list), - .ifaceinfo = sierra_net_ifnum_list - } }; static const struct driver_info sierra_net_info_direct_ip = { @@ -965,15 +933,19 @@ static const struct driver_info sierra_net_info_direct_ip = { .data = (unsigned long)&sierra_net_info_data_direct_ip, }; +#define DIRECT_IP_DEVICE(vend, prod) \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 7), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 10), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 11), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip} + static const struct usb_device_id products[] = { - {USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, + DIRECT_IP_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ + DIRECT_IP_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ + DIRECT_IP_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ + DIRECT_IP_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ {}, /* last item */ }; diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 1c6e51588da..f5ab6e613ec 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -616,7 +616,7 @@ static void smsc75xx_init_mac_address(struct usbnet *dev) /* no eeprom, or eeprom values are invalid. generate random MAC */ eth_hw_addr_random(dev->net); - netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr"); + netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr"); } static int smsc75xx_set_mac_address(struct usbnet *dev) @@ -1260,6 +1260,6 @@ static struct usb_driver smsc75xx_driver = { module_usb_driver(smsc75xx_driver); MODULE_AUTHOR("Nancy Lin"); -MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>"); +MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>"); MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index b1112e75385..d45e539a84b 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -578,6 +578,36 @@ static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev, return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data); } +static int smsc95xx_ethtool_getregslen(struct net_device *netdev) +{ + /* all smsc95xx registers */ + return COE_CR - ID_REV + 1; +} + +static void +smsc95xx_ethtool_getregs(struct net_device *netdev, struct ethtool_regs *regs, + void *buf) +{ + struct usbnet *dev = netdev_priv(netdev); + unsigned int i, j; + int retval; + u32 *data = buf; + + retval = smsc95xx_read_reg(dev, ID_REV, ®s->version); + if (retval < 0) { + netdev_warn(netdev, "REGS: cannot read ID_REV\n"); + return; + } + + for (i = ID_REV, j = 0; i <= COE_CR; i += (sizeof(u32)), j++) { + retval = smsc95xx_read_reg(dev, i, &data[j]); + if (retval < 0) { + netdev_warn(netdev, "REGS: cannot read reg[%x]\n", i); + return; + } + } +} + static const struct ethtool_ops smsc95xx_ethtool_ops = { .get_link = usbnet_get_link, .nway_reset = usbnet_nway_reset, @@ -589,6 +619,8 @@ static const struct ethtool_ops smsc95xx_ethtool_ops = { .get_eeprom_len = smsc95xx_ethtool_get_eeprom_len, .get_eeprom = smsc95xx_ethtool_get_eeprom, .set_eeprom = smsc95xx_ethtool_set_eeprom, + .get_regs_len = smsc95xx_ethtool_getregslen, + .get_regs = smsc95xx_ethtool_getregs, }; static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) @@ -615,7 +647,7 @@ static void smsc95xx_init_mac_address(struct usbnet *dev) /* no eeprom, or eeprom values are invalid. generate random MAC */ eth_hw_addr_random(dev->net); - netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr\n"); + netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n"); } static int smsc95xx_set_mac_address(struct usbnet *dev) @@ -1303,6 +1335,6 @@ static struct usb_driver smsc95xx_driver = { module_usb_driver(smsc95xx_driver); MODULE_AUTHOR("Nancy Lin"); -MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>"); +MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>"); MODULE_DESCRIPTION("SMSC95XX USB 2.0 Ethernet Devices"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index aba769d7745..fd4b26d46fd 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -180,7 +180,40 @@ int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress) } EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr); -static void intr_complete (struct urb *urb); +static void intr_complete (struct urb *urb) +{ + struct usbnet *dev = urb->context; + int status = urb->status; + + switch (status) { + /* success */ + case 0: + dev->driver_info->status(dev, urb); + break; + + /* software-driven interface shutdown */ + case -ENOENT: /* urb killed */ + case -ESHUTDOWN: /* hardware gone */ + netif_dbg(dev, ifdown, dev->net, + "intr shutdown, code %d\n", status); + return; + + /* NOTE: not throttling like RX/TX, since this endpoint + * already polls infrequently + */ + default: + netdev_dbg(dev->net, "intr status %d\n", status); + break; + } + + if (!netif_running (dev->net)) + return; + + status = usb_submit_urb (urb, GFP_ATOMIC); + if (status != 0) + netif_err(dev, timer, dev->net, + "intr resubmit --> %d\n", status); +} static int init_status (struct usbnet *dev, struct usb_interface *intf) { @@ -519,42 +552,6 @@ block: netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n"); } -static void intr_complete (struct urb *urb) -{ - struct usbnet *dev = urb->context; - int status = urb->status; - - switch (status) { - /* success */ - case 0: - dev->driver_info->status(dev, urb); - break; - - /* software-driven interface shutdown */ - case -ENOENT: /* urb killed */ - case -ESHUTDOWN: /* hardware gone */ - netif_dbg(dev, ifdown, dev->net, - "intr shutdown, code %d\n", status); - return; - - /* NOTE: not throttling like RX/TX, since this endpoint - * already polls infrequently - */ - default: - netdev_dbg(dev->net, "intr status %d\n", status); - break; - } - - if (!netif_running (dev->net)) - return; - - memset(urb->transfer_buffer, 0, urb->transfer_buffer_length); - status = usb_submit_urb (urb, GFP_ATOMIC); - if (status != 0) - netif_err(dev, timer, dev->net, - "intr resubmit --> %d\n", status); -} - /*-------------------------------------------------------------------------*/ void usbnet_pause_rx(struct usbnet *dev) { @@ -1312,7 +1309,6 @@ void usbnet_disconnect (struct usb_interface *intf) usb_free_urb(dev->interrupt); free_netdev(net); - usb_put_dev (xdev); } EXPORT_SYMBOL_GPL(usbnet_disconnect); @@ -1368,8 +1364,6 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) xdev = interface_to_usbdev (udev); interface = udev->cur_altsetting; - usb_get_dev (xdev); - status = -ENOMEM; // set up our own records @@ -1498,7 +1492,6 @@ out3: out1: free_netdev(net); out: - usb_put_dev(xdev); return status; } EXPORT_SYMBOL_GPL(usbnet_probe); @@ -1580,7 +1573,7 @@ int usbnet_resume (struct usb_interface *intf) netif_device_present(dev->net) && !timer_pending(&dev->delay) && !test_bit(EVENT_RX_HALT, &dev->flags)) - rx_alloc_submit(dev, GFP_KERNEL); + rx_alloc_submit(dev, GFP_NOIO); if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); @@ -1600,7 +1593,7 @@ static int __init usbnet_init(void) BUILD_BUG_ON( FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data)); - random_ether_addr(node_id); + eth_random_addr(node_id); return 0; } module_init(usbnet_init); |