diff options
Diffstat (limited to 'drivers/net/usb')
-rw-r--r-- | drivers/net/usb/Kconfig | 6 | ||||
-rw-r--r-- | drivers/net/usb/dm9601.c | 44 | ||||
-rw-r--r-- | drivers/net/usb/hso.c | 13 | ||||
-rw-r--r-- | drivers/net/usb/mcs7830.c | 19 |
4 files changed, 50 insertions, 32 deletions
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 85e4a01670f..47b0f732b0b 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -276,12 +276,12 @@ config USB_NET_CDC_MBIM module will be called cdc_mbim. config USB_NET_DM9601 - tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" + tristate "Davicom DM96xx based USB 10/100 ethernet devices" depends on USB_USBNET select CRC32 help - This option adds support for Davicom DM9601 based USB 1.1 - 10/100 Ethernet adapters. + This option adds support for Davicom DM9601/DM9620/DM9621A + based USB 10/100 Ethernet adapters. config USB_NET_SR9700 tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices" diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index c6867f926cf..14aa48fa8d7 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -1,5 +1,5 @@ /* - * Davicom DM9601 USB 1.1 10/100Mbps ethernet devices + * Davicom DM96xx USB 10/100Mbps ethernet devices * * Peter Korsgaard <jacmet@sunsite.dk> * @@ -364,7 +364,12 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &dm9601_ethtool_ops; dev->net->hard_header_len += DM_TX_OVERHEAD; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; - dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD; + + /* dm9620/21a require room for 4 byte padding, even in dm9601 + * mode, so we need +1 to be able to receive full size + * ethernet frames. + */ + dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD + 1; dev->mii.dev = dev->net; dev->mii.mdio_read = dm9601_mdio_read; @@ -468,7 +473,7 @@ static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb) static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { - int len; + int len, pad; /* format: b1: packet length low @@ -476,12 +481,23 @@ static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb, b3..n: packet data */ - len = skb->len; + len = skb->len + DM_TX_OVERHEAD; + + /* workaround for dm962x errata with tx fifo getting out of + * sync if a USB bulk transfer retry happens right after a + * packet with odd / maxpacket length by adding up to 3 bytes + * padding. + */ + while ((len & 1) || !(len % dev->maxpacket)) + len++; - if (skb_headroom(skb) < DM_TX_OVERHEAD) { + len -= DM_TX_OVERHEAD; /* hw header doesn't count as part of length */ + pad = len - skb->len; + + if (skb_headroom(skb) < DM_TX_OVERHEAD || skb_tailroom(skb) < pad) { struct sk_buff *skb2; - skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, 0, flags); + skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, pad, flags); dev_kfree_skb_any(skb); skb = skb2; if (!skb) @@ -490,10 +506,10 @@ static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb, __skb_push(skb, DM_TX_OVERHEAD); - /* usbnet adds padding if length is a multiple of packet size - if so, adjust length value in header */ - if ((skb->len % dev->maxpacket) == 0) - len++; + if (pad) { + memset(skb->data + skb->len, 0, pad); + __skb_put(skb, pad); + } skb->data[0] = len; skb->data[1] = len >> 8; @@ -543,7 +559,7 @@ static int dm9601_link_reset(struct usbnet *dev) } static const struct driver_info dm9601_info = { - .description = "Davicom DM9601 USB Ethernet", + .description = "Davicom DM96xx USB 10/100 Ethernet", .flags = FLAG_ETHER | FLAG_LINK_INTR, .bind = dm9601_bind, .rx_fixup = dm9601_rx_fixup, @@ -594,6 +610,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0a46, 0x9620), /* DM9620 USB to Fast Ethernet Adapter */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0a46, 0x9621), /* DM9621A USB to Fast Ethernet Adapter */ + .driver_info = (unsigned long)&dm9601_info, + }, {}, // END }; @@ -612,5 +632,5 @@ static struct usb_driver dm9601_driver = { module_usb_driver(dm9601_driver); MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>"); -MODULE_DESCRIPTION("Davicom DM9601 USB 1.1 ethernet devices"); +MODULE_DESCRIPTION("Davicom DM96xx USB 10/100 ethernet devices"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 86292e6aaf4..1a482344b3f 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -185,7 +185,6 @@ enum rx_ctrl_state{ #define BM_REQUEST_TYPE (0xa1) #define B_NOTIFICATION (0x20) #define W_VALUE (0x0) -#define W_INDEX (0x2) #define W_LENGTH (0x2) #define B_OVERRUN (0x1<<6) @@ -1487,6 +1486,7 @@ static void tiocmget_intr_callback(struct urb *urb) struct uart_icount *icount; struct hso_serial_state_notification *serial_state_notification; struct usb_device *usb; + int if_num; /* Sanity checks */ if (!serial) @@ -1495,15 +1495,24 @@ static void tiocmget_intr_callback(struct urb *urb) handle_usb_error(status, __func__, serial->parent); return; } + + /* tiocmget is only supported on HSO_PORT_MODEM */ tiocmget = serial->tiocmget; if (!tiocmget) return; + BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM); + usb = serial->parent->usb; + if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber; + + /* wIndex should be the USB interface number of the port to which the + * notification applies, which should always be the Modem port. + */ serial_state_notification = &tiocmget->serial_state_notification; if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE || serial_state_notification->bNotification != B_NOTIFICATION || le16_to_cpu(serial_state_notification->wValue) != W_VALUE || - le16_to_cpu(serial_state_notification->wIndex) != W_INDEX || + le16_to_cpu(serial_state_notification->wIndex) != if_num || le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) { dev_warn(&usb->dev, "hso received invalid serial state notification\n"); diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index 03832d3780a..f5463782857 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -117,7 +117,6 @@ enum { struct mcs7830_data { u8 multi_filter[8]; u8 config; - u8 link_counter; }; static const char driver_name[] = "MOSCHIP usb-ethernet driver"; @@ -561,26 +560,16 @@ static void mcs7830_status(struct usbnet *dev, struct urb *urb) { u8 *buf = urb->transfer_buffer; bool link, link_changed; - struct mcs7830_data *data = mcs7830_get_data(dev); if (urb->actual_length < 16) return; - link = !(buf[1] & 0x20); + link = !(buf[1] == 0x20); link_changed = netif_carrier_ok(dev->net) != link; if (link_changed) { - data->link_counter++; - /* - track link state 20 times to guard against erroneous - link state changes reported sometimes by the chip - */ - if (data->link_counter > 20) { - data->link_counter = 0; - usbnet_link_change(dev, link, 0); - netdev_dbg(dev->net, "Link Status is: %d\n", link); - } - } else - data->link_counter = 0; + usbnet_link_change(dev, link, 0); + netdev_dbg(dev->net, "Link Status is: %d\n", link); + } } static const struct driver_info moschip_info = { |