diff options
Diffstat (limited to 'drivers/net/wan/Kconfig')
| -rw-r--r-- | drivers/net/wan/Kconfig | 95 |
1 files changed, 48 insertions, 47 deletions
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 54b8e492ef9..21f76f51c95 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -57,44 +57,6 @@ config COSA The driver will be compiled as a module: the module will be called cosa. -config DSCC4 - tristate "Etinc PCISYNC serial board support" - depends on WAN && PCI && m - help - Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens) - DSCC4 chipset. - - This is supposed to work with the four port card. Take a look at - <http://www.cogenit.fr/dscc4/> for further information about the - driver. - - To compile this driver as a module, choose M here: the - module will be called dscc4. - -config DSCC4_PCISYNC - bool "Etinc PCISYNC features" - depends on DSCC4 - help - Due to Etinc's design choice for its PCISYNC cards, some operations - are only allowed on specific ports of the DSCC4. This option is the - only way for the driver to know that it shouldn't return a success - code for these operations. - - Please say Y if your card is an Etinc's PCISYNC. - -config DSCC4_PCI_RST - bool "Hard reset support" - depends on DSCC4 - help - Various DSCC4 bugs forbid any reliable software reset of the ASIC. - As a replacement, some vendors provide a way to assert the PCI #RST - pin of DSCC4 through the GPIO port of the card. If you choose Y, - the driver will make use of this feature before module removal - (i.e. rmmod). The feature is known to be available on Commtech's - cards. Contact your manufacturer for details. - - Say Y if your card supports this feature. - # # Lan Media's board. Currently 1000, 1200, 5200, 5245 # @@ -127,7 +89,7 @@ config LANMEDIA # There is no way to detect a Sealevel board. Force it modular config SEALEVEL_4021 tristate "Sealevel Systems 4021 support" - depends on WAN && ISA && m && ISA_DMA_API + depends on WAN && ISA && m && ISA_DMA_API && INET help This is a driver for the Sealevel Systems ACB 56 serial I/O adapter. @@ -154,7 +116,7 @@ config HDLC If unsure, say N. config HDLC_RAW - bool "Raw HDLC support" + tristate "Raw HDLC support" depends on HDLC help Generic HDLC driver supporting raw HDLC over WAN connections. @@ -162,7 +124,7 @@ config HDLC_RAW If unsure, say N. config HDLC_RAW_ETH - bool "Raw HDLC Ethernet device support" + tristate "Raw HDLC Ethernet device support" depends on HDLC help Generic HDLC driver supporting raw HDLC Ethernet device emulation @@ -173,7 +135,7 @@ config HDLC_RAW_ETH If unsure, say N. config HDLC_CISCO - bool "Cisco HDLC support" + tristate "Cisco HDLC support" depends on HDLC help Generic HDLC driver supporting Cisco HDLC over WAN connections. @@ -181,7 +143,7 @@ config HDLC_CISCO If unsure, say N. config HDLC_FR - bool "Frame Relay support" + tristate "Frame Relay support" depends on HDLC help Generic HDLC driver supporting Frame Relay over WAN connections. @@ -189,7 +151,7 @@ config HDLC_FR If unsure, say N. config HDLC_PPP - bool "Synchronous Point-to-Point Protocol (PPP) support" + tristate "Synchronous Point-to-Point Protocol (PPP) support" depends on HDLC help Generic HDLC driver supporting PPP over WAN connections. @@ -197,7 +159,7 @@ config HDLC_PPP If unsure, say N. config HDLC_X25 - bool "X.25 protocol support" + tristate "X.25 protocol support" depends on HDLC && (LAPB=m && HDLC=m || LAPB=y) help Generic HDLC driver supporting X.25 over WAN connections. @@ -323,6 +285,44 @@ config FARSYNC To compile this driver as a module, choose M here: the module will be called farsync. +config DSCC4 + tristate "Etinc PCISYNC serial board support" + depends on HDLC && PCI && m + help + Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens) + DSCC4 chipset. + + This is supposed to work with the four port card. Take a look at + <http://www.cogenit.fr/dscc4/> for further information about the + driver. + + To compile this driver as a module, choose M here: the + module will be called dscc4. + +config DSCC4_PCISYNC + bool "Etinc PCISYNC features" + depends on DSCC4 + help + Due to Etinc's design choice for its PCISYNC cards, some operations + are only allowed on specific ports of the DSCC4. This option is the + only way for the driver to know that it shouldn't return a success + code for these operations. + + Please say Y if your card is an Etinc's PCISYNC. + +config DSCC4_PCI_RST + bool "Hard reset support" + depends on DSCC4 + help + Various DSCC4 bugs forbid any reliable software reset of the ASIC. + As a replacement, some vendors provide a way to assert the PCI #RST + pin of DSCC4 through the GPIO port of the card. If you choose Y, + the driver will make use of this feature before module removal + (i.e. rmmod). The feature is known to be available on Commtech's + cards. Contact your manufacturer for details. + + Say Y if your card supports this feature. + config DLCI tristate "Frame Relay DLCI support" depends on WAN @@ -382,7 +382,7 @@ config SDLA # Wan router core. config WAN_ROUTER_DRIVERS - bool "WAN router drivers" + tristate "WAN router drivers" depends on WAN && WAN_ROUTER ---help--- Connect LAN to WAN via Linux box. @@ -393,7 +393,8 @@ config WAN_ROUTER_DRIVERS <file:Documentation/networking/wan-router.txt>. Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all + kernel except for how subordinate drivers may be built: + saying N will just cause the configurator to skip all the questions about WAN router drivers. If unsure, say N. |