diff options
Diffstat (limited to 'drivers/net/wan/sdla_x25.c')
| -rw-r--r-- | drivers/net/wan/sdla_x25.c | 5496 |
1 files changed, 5496 insertions, 0 deletions
diff --git a/drivers/net/wan/sdla_x25.c b/drivers/net/wan/sdla_x25.c new file mode 100644 index 00000000000..3a93d2fd4fb --- /dev/null +++ b/drivers/net/wan/sdla_x25.c @@ -0,0 +1,5496 @@ +/***************************************************************************** +* sdla_x25.c WANPIPE(tm) Multiprotocol WAN Link Driver. X.25 module. +* +* Author: Nenad Corbic <ncorbic@sangoma.com> +* +* Copyright: (c) 1995-2001 Sangoma Technologies Inc. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +* ============================================================================ +* Apr 03, 2001 Nenad Corbic o Fixed the rx_skb=NULL bug in x25 in rx_intr(). +* Dec 26, 2000 Nenad Corbic o Added a new polling routine, that uses +* a kernel timer (more efficient). +* Dec 25, 2000 Nenad Corbic o Updated for 2.4.X kernel +* Jul 26, 2000 Nenad Corbic o Increased the local packet buffering +* for API to 4096+header_size. +* Jul 17, 2000 Nenad Corbic o Fixed the x25 startup bug. Enable +* communications only after all interfaces +* come up. HIGH SVC/PVC is used to calculate +* the number of channels. +* Enable protocol only after all interfaces +* are enabled. +* Jul 10, 2000 Nenad Corbic o Fixed the M_BIT bug. +* Apr 25, 2000 Nenad Corbic o Pass Modem messages to the API. +* Disable idle timeout in X25 API. +* Apr 14, 2000 Nenad Corbic o Fixed: Large LCN number support. +* Maximum LCN number is 4095. +* Maximum number of X25 channels is 255. +* Apr 06, 2000 Nenad Corbic o Added SMP Support. +* Mar 29, 2000 Nenad Corbic o Added support for S514 PCI Card +* Mar 23, 2000 Nenad Corbic o Improved task queue, BH handling. +* Mar 14, 2000 Nenad Corbic o Updated Protocol Violation handling +* routines. Bug Fix. +* Mar 10, 2000 Nenad Corbic o Bug Fix: corrupted mbox recovery. +* Mar 09, 2000 Nenad Corbic o Fixed the auto HDLC bug. +* Mar 08, 2000 Nenad Corbic o Fixed LAPB HDLC startup problems. +* Application must bring the link up +* before tx/rx, and bring the +* link down on close(). +* Mar 06, 2000 Nenad Corbic o Added an option for logging call setup +* information. +* Feb 29, 2000 Nenad Corbic o Added support for LAPB HDLC API +* Feb 25, 2000 Nenad Corbic o Fixed the modem failure handling. +* No Modem OOB message will be passed +* to the user. +* Feb 21, 2000 Nenad Corbic o Added Xpipemon Debug Support +* Dec 30, 1999 Nenad Corbic o Socket based X25API +* Sep 17, 1998 Jaspreet Singh o Updates for 2.2.X kernel +* Mar 15, 1998 Alan Cox o 2.1.x porting +* Dec 19, 1997 Jaspreet Singh o Added multi-channel IPX support +* Nov 27, 1997 Jaspreet Singh o Added protection against enabling of irqs +* when they are disabled. +* Nov 17, 1997 Farhan Thawar o Added IPX support +* o Changed if_send() to now buffer packets when +* the board is busy +* o Removed queueing of packets via the polling +* routing +* o Changed if_send() critical flags to properly +* handle race conditions +* Nov 06, 1997 Farhan Thawar o Added support for SVC timeouts +* o Changed PVC encapsulation to ETH_P_IP +* Jul 21, 1997 Jaspreet Singh o Fixed freeing up of buffers using kfree() +* when packets are received. +* Mar 11, 1997 Farhan Thawar Version 3.1.1 +* o added support for V35 +* o changed if_send() to return 0 if +* wandev.critical() is true +* o free socket buffer in if_send() if +* returning 0 +* o added support for single '@' address to +* accept all incoming calls +* o fixed bug in set_chan_state() to disconnect +* Jan 15, 1997 Gene Kozin Version 3.1.0 +* o implemented exec() entry point +* Jan 07, 1997 Gene Kozin Initial version. +*****************************************************************************/ + +/*====================================================== + * Includes + *=====================================================*/ + +#include <linux/module.h> +#include <linux/kernel.h> /* printk(), and other useful stuff */ +#include <linux/stddef.h> /* offsetof(), etc. */ +#include <linux/errno.h> /* return codes */ +#include <linux/string.h> /* inline memset(), etc. */ +#include <linux/ctype.h> +#include <linux/slab.h> /* kmalloc(), kfree() */ +#include <linux/wanrouter.h> /* WAN router definitions */ +#include <linux/wanpipe.h> /* WANPIPE common user API definitions */ +#include <linux/workqueue.h> +#include <asm/byteorder.h> /* htons(), etc. */ +#include <asm/atomic.h> +#include <linux/delay.h> /* Experimental delay */ + +#include <asm/uaccess.h> + +#include <linux/if.h> +#include <linux/if_arp.h> +#include <linux/sdla_x25.h> /* X.25 firmware API definitions */ +#include <linux/if_wanpipe_common.h> +#include <linux/if_wanpipe.h> + + +/*====================================================== + * Defines & Macros + *=====================================================*/ + + +#define CMD_OK 0 /* normal firmware return code */ +#define CMD_TIMEOUT 0xFF /* firmware command timed out */ +#define MAX_CMD_RETRY 10 /* max number of firmware retries */ + +#define X25_CHAN_MTU 4096 /* unfragmented logical channel MTU */ +#define X25_HRDHDR_SZ 7 /* max encapsulation header size */ +#define X25_CONCT_TMOUT (90*HZ) /* link connection timeout */ +#define X25_RECON_TMOUT (10*HZ) /* link connection timeout */ +#define CONNECT_TIMEOUT (90*HZ) /* link connection timeout */ +#define HOLD_DOWN_TIME (30*HZ) /* link hold down time */ +#define MAX_BH_BUFF 10 +#define M_BIT 0x01 + +//#define PRINT_DEBUG 1 +#ifdef PRINT_DEBUG +#define DBG_PRINTK(format, a...) printk(format, ## a) +#else +#define DBG_PRINTK(format, a...) +#endif + +#define TMR_INT_ENABLED_POLL_ACTIVE 0x01 +#define TMR_INT_ENABLED_POLL_CONNECT_ON 0x02 +#define TMR_INT_ENABLED_POLL_CONNECT_OFF 0x04 +#define TMR_INT_ENABLED_POLL_DISCONNECT 0x08 +#define TMR_INT_ENABLED_CMD_EXEC 0x10 +#define TMR_INT_ENABLED_UPDATE 0x20 +#define TMR_INT_ENABLED_UDP_PKT 0x40 + +#define MAX_X25_ADDR_SIZE 16 +#define MAX_X25_DATA_SIZE 129 +#define MAX_X25_FACL_SIZE 110 + +#define TRY_CMD_AGAIN 2 +#define DELAY_RESULT 1 +#define RETURN_RESULT 0 + +#define DCD(x) (x & 0x03 ? "HIGH" : "LOW") +#define CTS(x) (x & 0x05 ? "HIGH" : "LOW") + + +/* Driver will not write log messages about + * modem status if defined.*/ +#define MODEM_NOT_LOG 1 + +/*==================================================== + * For IPXWAN + *===================================================*/ + +#define CVHexToAscii(b) (((unsigned char)(b) > (unsigned char)9) ? ((unsigned char)'A' + ((unsigned char)(b) - (unsigned char)10)) : ((unsigned char)'0' + (unsigned char)(b))) + + +/*==================================================== + * MEMORY DEBUGGING FUNCTION + *==================================================== + +#define KMEM_SAFETYZONE 8 + +static void * dbg_kmalloc(unsigned int size, int prio, int line) { + int i = 0; + void * v = kmalloc(size+sizeof(unsigned int)+2*KMEM_SAFETYZONE*8,prio); + char * c1 = v; + c1 += sizeof(unsigned int); + *((unsigned int *)v) = size; + + for (i = 0; i < KMEM_SAFETYZONE; i++) { + c1[0] = 'D'; c1[1] = 'E'; c1[2] = 'A'; c1[3] = 'D'; + c1[4] = 'B'; c1[5] = 'E'; c1[6] = 'E'; c1[7] = 'F'; + c1 += 8; + } + c1 += size; + for (i = 0; i < KMEM_SAFETYZONE; i++) { + c1[0] = 'M'; c1[1] = 'U'; c1[2] = 'N'; c1[3] = 'G'; + c1[4] = 'W'; c1[5] = 'A'; c1[6] = 'L'; c1[7] = 'L'; + c1 += 8; + } + v = ((char *)v) + sizeof(unsigned int) + KMEM_SAFETYZONE*8; + printk(KERN_INFO "line %d kmalloc(%d,%d) = %p\n",line,size,prio,v); + return v; +} +static void dbg_kfree(void * v, int line) { + unsigned int * sp = (unsigned int *)(((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8)); + unsigned int size = *sp; + char * c1 = ((char *)v) - KMEM_SAFETYZONE*8; + int i = 0; + for (i = 0; i < KMEM_SAFETYZONE; i++) { + if ( c1[0] != 'D' || c1[1] != 'E' || c1[2] != 'A' || c1[3] != 'D' + || c1[4] != 'B' || c1[5] != 'E' || c1[6] != 'E' || c1[7] != 'F') { + printk(KERN_INFO "kmalloced block at %p has been corrupted (underrun)!\n",v); + printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, + c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); + } + c1 += 8; + } + c1 += size; + for (i = 0; i < KMEM_SAFETYZONE; i++) { + if ( c1[0] != 'M' || c1[1] != 'U' || c1[2] != 'N' || c1[3] != 'G' + || c1[4] != 'W' || c1[5] != 'A' || c1[6] != 'L' || c1[7] != 'L' + ) { + printk(KERN_INFO "kmalloced block at %p has been corrupted (overrun):\n",v); + printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, + c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); + } + c1 += 8; + } + printk(KERN_INFO "line %d kfree(%p)\n",line,v); + v = ((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8); + kfree(v); +} + +#define kmalloc(x,y) dbg_kmalloc(x,y,__LINE__) +#define kfree(x) dbg_kfree(x,__LINE__) + +==============================================================*/ + + + +/*=============================================== + * Data Structures + *===============================================*/ + + +/*======================================================== + * Name: x25_channel + * + * Purpose: To hold private informaton for each + * logical channel. + * + * Rationale: Per-channel debugging is possible if each + * channel has its own private area. + * + * Assumptions: + * + * Description: This is an extention of the struct net_device + * we create for each network interface to keep + * the rest of X.25 channel-specific data. + * + * Construct: Typedef + */ +typedef struct x25_channel +{ + wanpipe_common_t common; /* common area for x25api and socket */ + char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ + char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ + unsigned tx_pkt_size; + unsigned short protocol; /* ethertype, 0 - multiplexed */ + char drop_sequence; /* mark sequence for dropping */ + unsigned long state_tick; /* time of the last state change */ + unsigned idle_timeout; /* sec, before disconnecting */ + unsigned long i_timeout_sofar; /* # of sec's we've been idle */ + unsigned hold_timeout; /* sec, before re-connecting */ + unsigned long tick_counter; /* counter for transmit time out */ + char devtint; /* Weather we should dev_tint() */ + struct sk_buff* rx_skb; /* receive socket buffer */ + struct sk_buff* tx_skb; /* transmit socket buffer */ + + bh_data_t *bh_head; /* Circular buffer for x25api_bh */ + unsigned long tq_working; + volatile int bh_write; + volatile int bh_read; + atomic_t bh_buff_used; + + sdla_t* card; /* -> owner */ + struct net_device *dev; /* -> bound devce */ + + int ch_idx; + unsigned char enable_IPX; + unsigned long network_number; + struct net_device_stats ifstats; /* interface statistics */ + unsigned short transmit_length; + unsigned short tx_offset; + char transmit_buffer[X25_CHAN_MTU+sizeof(x25api_hdr_t)]; + + if_send_stat_t if_send_stat; + rx_intr_stat_t rx_intr_stat; + pipe_mgmt_stat_t pipe_mgmt_stat; + + unsigned long router_start_time; /* Router start time in seconds */ + unsigned long router_up_time; + +} x25_channel_t; + +/* FIXME Take this out */ + +#ifdef NEX_OLD_CALL_INFO +typedef struct x25_call_info +{ + char dest[17]; PACKED;/* ASCIIZ destination address */ + char src[17]; PACKED;/* ASCIIZ source address */ + char nuser; PACKED;/* number of user data bytes */ + unsigned char user[127]; PACKED;/* user data */ + char nfacil; PACKED;/* number of facilities */ + struct + { + unsigned char code; PACKED; + unsigned char parm; PACKED; + } facil[64]; /* facilities */ +} x25_call_info_t; +#else +typedef struct x25_call_info +{ + char dest[MAX_X25_ADDR_SIZE] PACKED;/* ASCIIZ destination address */ + char src[MAX_X25_ADDR_SIZE] PACKED;/* ASCIIZ source address */ + unsigned char nuser PACKED; + unsigned char user[MAX_X25_DATA_SIZE] PACKED;/* user data */ + unsigned char nfacil PACKED; + unsigned char facil[MAX_X25_FACL_SIZE] PACKED; + unsigned short lcn PACKED; +} x25_call_info_t; +#endif + + + +/*=============================================== + * Private Function Prototypes + *==============================================*/ + + +/*================================================= + * WAN link driver entry points. These are + * called by the WAN router module. + */ +static int update(struct wan_device* wandev); +static int new_if(struct wan_device* wandev, struct net_device* dev, + wanif_conf_t* conf); +static int del_if(struct wan_device* wandev, struct net_device* dev); +static void disable_comm (sdla_t* card); +static void disable_comm_shutdown(sdla_t *card); + + + +/*================================================= + * WANPIPE-specific entry points + */ +static int wpx_exec (struct sdla* card, void* u_cmd, void* u_data); +static void x25api_bh(struct net_device *dev); +static int x25api_bh_cleanup(struct net_device *dev); +static int bh_enqueue(struct net_device *dev, struct sk_buff *skb); + + +/*================================================= + * Network device interface + */ +static int if_init(struct net_device* dev); +static int if_open(struct net_device* dev); +static int if_close(struct net_device* dev); +static int if_header(struct sk_buff* skb, struct net_device* dev, + unsigned short type, void* daddr, void* saddr, unsigned len); +static int if_rebuild_hdr (struct sk_buff* skb); +static int if_send(struct sk_buff* skb, struct net_device* dev); +static struct net_device_stats *if_stats(struct net_device* dev); + +static void if_tx_timeout(struct net_device *dev); + +/*================================================= + * Interrupt handlers + */ +static void wpx_isr (sdla_t *); +static void rx_intr (sdla_t *); +static void tx_intr (sdla_t *); +static void status_intr (sdla_t *); +static void event_intr (sdla_t *); +static void spur_intr (sdla_t *); +static void timer_intr (sdla_t *); + +static int tx_intr_send(sdla_t *card, struct net_device *dev); +static struct net_device *move_dev_to_next(sdla_t *card, + struct net_device *dev); + +/*================================================= + * Background polling routines + */ +static void wpx_poll (sdla_t* card); +static void poll_disconnected (sdla_t* card); +static void poll_connecting (sdla_t* card); +static void poll_active (sdla_t* card); +static void trigger_x25_poll(sdla_t *card); +static void x25_timer_routine(unsigned long data); + + + +/*================================================= + * X.25 firmware interface functions + */ +static int x25_get_version (sdla_t* card, char* str); +static int x25_configure (sdla_t* card, TX25Config* conf); +static int hdlc_configure (sdla_t* card, TX25Config* conf); +static int set_hdlc_level (sdla_t* card); +static int x25_get_err_stats (sdla_t* card); +static int x25_get_stats (sdla_t* card); +static int x25_set_intr_mode (sdla_t* card, int mode); +static int x25_close_hdlc (sdla_t* card); +static int x25_open_hdlc (sdla_t* card); +static int x25_setup_hdlc (sdla_t* card); +static int x25_set_dtr (sdla_t* card, int dtr); +static int x25_get_chan_conf (sdla_t* card, x25_channel_t* chan); +static int x25_place_call (sdla_t* card, x25_channel_t* chan); +static int x25_accept_call (sdla_t* card, int lcn, int qdm); +static int x25_clear_call (sdla_t* card, int lcn, int cause, int diagn); +static int x25_send (sdla_t* card, int lcn, int qdm, int len, void* buf); +static int x25_fetch_events (sdla_t* card); +static int x25_error (sdla_t* card, int err, int cmd, int lcn); + +/*================================================= + * X.25 asynchronous event handlers + */ +static int incoming_call (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); +static int call_accepted (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); +static int call_cleared (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); +static int timeout_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); +static int restart_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); + + +/*================================================= + * Miscellaneous functions + */ +static int connect (sdla_t* card); +static int disconnect (sdla_t* card); +static struct net_device* get_dev_by_lcn(struct wan_device* wandev, + unsigned lcn); +static int chan_connect(struct net_device* dev); +static int chan_disc(struct net_device* dev); +static void set_chan_state(struct net_device* dev, int state); +static int chan_send(struct net_device *dev, void* buff, unsigned data_len, + unsigned char tx_intr); +static unsigned char bps_to_speed_code (unsigned long bps); +static unsigned int dec_to_uint (unsigned char* str, int len); +static unsigned int hex_to_uint (unsigned char*, int); +static void parse_call_info (unsigned char*, x25_call_info_t*); +static struct net_device *find_channel(sdla_t *card, unsigned lcn); +static void bind_lcn_to_dev(sdla_t *card, struct net_device *dev, unsigned lcn); +static void setup_for_delayed_transmit(struct net_device *dev, + void *buf, unsigned len); + + +/*================================================= + * X25 API Functions + */ +static int wanpipe_pull_data_in_skb(sdla_t *card, struct net_device *dev, + struct sk_buff **); +static void timer_intr_exec(sdla_t *, unsigned char); +static int execute_delayed_cmd(sdla_t *card, struct net_device *dev, + mbox_cmd_t *usr_cmd, char bad_cmd); +static int api_incoming_call (sdla_t*, TX25Mbox *, int); +static int alloc_and_init_skb_buf (sdla_t *,struct sk_buff **, int); +static void send_delayed_cmd_result(sdla_t *card, struct net_device *dev, + TX25Mbox* mbox); +static int clear_confirm_event (sdla_t *, TX25Mbox*); +static void send_oob_msg (sdla_t *card, struct net_device *dev, TX25Mbox *mbox); +static int timer_intr_cmd_exec(sdla_t *card); +static void api_oob_event (sdla_t *card,TX25Mbox *mbox); +static int check_bad_command(sdla_t *card, struct net_device *dev); +static int channel_disconnect(sdla_t* card, struct net_device *dev); +static void hdlc_link_down (sdla_t*); + +/*================================================= + * XPIPEMON Functions + */ +static int process_udp_mgmt_pkt(sdla_t *); +static int udp_pkt_type( struct sk_buff *, sdla_t*); +static int reply_udp( unsigned char *, unsigned int); +static void init_x25_channel_struct( x25_channel_t *); +static void init_global_statistics( sdla_t *); +static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t *card, + struct net_device *dev, + struct sk_buff *skb, int lcn); +static unsigned short calc_checksum (char *, int); + + + +/*================================================= + * IPX functions + */ +static void switch_net_numbers(unsigned char *, unsigned long, unsigned char); +static int handle_IPXWAN(unsigned char *, char *, unsigned char , + unsigned long , unsigned short ); + +extern void disable_irq(unsigned int); +extern void enable_irq(unsigned int); + +static void S508_S514_lock(sdla_t *, unsigned long *); +static void S508_S514_unlock(sdla_t *, unsigned long *); + + +/*================================================= + * Global Variables + *=================================================*/ + + + +/*================================================= + * Public Functions + *=================================================*/ + + + + +/*=================================================================== + * wpx_init: X.25 Protocol Initialization routine. + * + * Purpose: To initialize the protocol/firmware. + * + * Rationale: This function is called by setup() function, in + * sdlamain.c, to dynamically setup the x25 protocol. + * This is the first protocol specific function, which + * executes once on startup. + * + * Description: This procedure initializes the x25 firmware and + * sets up the mailbox, transmit and receive buffer + * pointers. It also initializes all debugging structures + * and sets up the X25 environment. + * + * Sets up hardware options defined by user in [wanpipe#] + * section of wanpipe#.conf configuration file. + * + * At this point adapter is completely initialized + * and X.25 firmware is running. + * o read firmware version (to make sure it's alive) + * o configure adapter + * o initialize protocol-specific fields of the + * adapter data space. + * + * Called by: setup() function in sdlamain.c + * + * Assumptions: None + * + * Warnings: None + * + * Return: 0 o.k. + * < 0 failure. + */ + +int wpx_init (sdla_t* card, wandev_conf_t* conf) +{ + union{ + char str[80]; + TX25Config cfg; + } u; + + /* Verify configuration ID */ + if (conf->config_id != WANCONFIG_X25){ + printk(KERN_INFO "%s: invalid configuration ID %u!\n", + card->devname, conf->config_id) + ; + return -EINVAL; + } + + /* Initialize protocol-specific fields */ + card->mbox = (void*)(card->hw.dpmbase + X25_MBOX_OFFS); + card->rxmb = (void*)(card->hw.dpmbase + X25_RXMBOX_OFFS); + card->flags = (void*)(card->hw.dpmbase + X25_STATUS_OFFS); + + /* Initialize for S514 Card */ + if(card->hw.type == SDLA_S514) { + card->mbox += X25_MB_VECTOR; + card->flags += X25_MB_VECTOR; + card->rxmb += X25_MB_VECTOR; + } + + + /* Read firmware version. Note that when adapter initializes, it + * clears the mailbox, so it may appear that the first command was + * executed successfully when in fact it was merely erased. To work + * around this, we execute the first command twice. + */ + if (x25_get_version(card, NULL) || x25_get_version(card, u.str)) + return -EIO; + + + /* X25 firmware can run ether in X25 or LAPB HDLC mode. + * Check the user defined option and configure accordingly */ + if (conf->u.x25.LAPB_hdlc_only == WANOPT_YES){ + if (set_hdlc_level(card) != CMD_OK){ + return -EIO; + }else{ + printk(KERN_INFO "%s: running LAP_B HDLC firmware v%s\n", + card->devname, u.str); + } + card->u.x.LAPB_hdlc = 1; + }else{ + printk(KERN_INFO "%s: running X.25 firmware v%s\n", + card->devname, u.str); + card->u.x.LAPB_hdlc = 0; + } + + /* Configure adapter. Here we set resonable defaults, then parse + * device configuration structure and set configuration options. + * Most configuration options are verified and corrected (if + * necessary) since we can't rely on the adapter to do so. + */ + memset(&u.cfg, 0, sizeof(u.cfg)); + u.cfg.t1 = 3; + u.cfg.n2 = 10; + u.cfg.autoHdlc = 1; /* automatic HDLC connection */ + u.cfg.hdlcWindow = 7; + u.cfg.pktWindow = 2; + u.cfg.station = 1; /* DTE */ + u.cfg.options = 0x0090; /* disable D-bit pragmatics */ + u.cfg.ccittCompat = 1988; + u.cfg.t10t20 = 30; + u.cfg.t11t21 = 30; + u.cfg.t12t22 = 30; + u.cfg.t13t23 = 30; + u.cfg.t16t26 = 30; + u.cfg.t28 = 30; + u.cfg.r10r20 = 5; + u.cfg.r12r22 = 5; + u.cfg.r13r23 = 5; + u.cfg.responseOpt = 1; /* RR's after every packet */ + + if (card->u.x.LAPB_hdlc){ + u.cfg.hdlcMTU = 1027; + } + + if (conf->u.x25.x25_conf_opt){ + u.cfg.options = conf->u.x25.x25_conf_opt; + } + + if (conf->clocking != WANOPT_EXTERNAL) + u.cfg.baudRate = bps_to_speed_code(conf->bps); + + if (conf->station != WANOPT_DTE){ + u.cfg.station = 0; /* DCE mode */ + } + + if (conf->interface != WANOPT_RS232 ){ + u.cfg.hdlcOptions |= 0x80; /* V35 mode */ + } + + /* adjust MTU */ + if (!conf->mtu || (conf->mtu >= 1024)) + card->wandev.mtu = 1024; + else if (conf->mtu >= 512) + card->wandev.mtu = 512; + else if (conf->mtu >= 256) + card->wandev.mtu = 256; + else if (conf->mtu >= 128) + card->wandev.mtu = 128; + else + card->wandev.mtu = 64; + + u.cfg.defPktSize = u.cfg.pktMTU = card->wandev.mtu; + + if (conf->u.x25.hi_pvc){ + card->u.x.hi_pvc = min_t(unsigned int, conf->u.x25.hi_pvc, MAX_LCN_NUM); + card->u.x.lo_pvc = min_t(unsigned int, conf->u.x25.lo_pvc, card->u.x.hi_pvc); + } + + if (conf->u.x25.hi_svc){ + card->u.x.hi_svc = min_t(unsigned int, conf->u.x25.hi_svc, MAX_LCN_NUM); + card->u.x.lo_svc = min_t(unsigned int, conf->u.x25.lo_svc, card->u.x.hi_svc); + } + + /* Figure out the total number of channels to configure */ + card->u.x.num_of_ch = 0; + if (card->u.x.hi_svc != 0){ + card->u.x.num_of_ch = (card->u.x.hi_svc - card->u.x.lo_svc) + 1; + } + if (card->u.x.hi_pvc != 0){ + card->u.x.num_of_ch += (card->u.x.hi_pvc - card->u.x.lo_pvc) + 1; + } + + if (card->u.x.num_of_ch == 0){ + printk(KERN_INFO "%s: ERROR, Minimum number of PVC/SVC channels is 1 !\n" + "%s: Please set the Lowest/Highest PVC/SVC values !\n", + card->devname,card->devname); + return -ECHRNG; + } + + u.cfg.loPVC = card->u.x.lo_pvc; + u.cfg.hiPVC = card->u.x.hi_pvc; + u.cfg.loTwoWaySVC = card->u.x.lo_svc; + u.cfg.hiTwoWaySVC = card->u.x.hi_svc; + + if (conf->u.x25.hdlc_window) + u.cfg.hdlcWindow = min_t(unsigned int, conf->u.x25.hdlc_window, 7); + if (conf->u.x25.pkt_window) + u.cfg.pktWindow = min_t(unsigned int, conf->u.x25.pkt_window, 7); + + if (conf->u.x25.t1) + u.cfg.t1 = min_t(unsigned int, conf->u.x25.t1, 30); + if (conf->u.x25.t2) + u.cfg.t2 = min_t(unsigned int, conf->u.x25.t2, 29); + if (conf->u.x25.t4) + u.cfg.t4 = min_t(unsigned int, conf->u.x25.t4, 240); + if (conf->u.x25.n2) + u.cfg.n2 = min_t(unsigned int, conf->u.x25.n2, 30); + + if (conf->u.x25.t10_t20) + u.cfg.t10t20 = min_t(unsigned int, conf->u.x25.t10_t20,255); + if (conf->u.x25.t11_t21) + u.cfg.t11t21 = min_t(unsigned int, conf->u.x25.t11_t21,255); + if (conf->u.x25.t12_t22) + u.cfg.t12t22 = min_t(unsigned int, conf->u.x25.t12_t22,255); + if (conf->u.x25.t13_t23) + u.cfg.t13t23 = min_t(unsigned int, conf->u.x25.t13_t23,255); + if (conf->u.x25.t16_t26) + u.cfg.t16t26 = min_t(unsigned int, conf->u.x25.t16_t26, 255); + if (conf->u.x25.t28) + u.cfg.t28 = min_t(unsigned int, conf->u.x25.t28, 255); + + if (conf->u.x25.r10_r20) + u.cfg.r10r20 = min_t(unsigned int, conf->u.x25.r10_r20,250); + if (conf->u.x25.r12_r22) + u.cfg.r12r22 = min_t(unsigned int, conf->u.x25.r12_r22,250); + if (conf->u.x25.r13_r23) + u.cfg.r13r23 = min_t(unsigned int, conf->u.x25.r13_r23,250); + + + if (conf->u.x25.ccitt_compat) + u.cfg.ccittCompat = conf->u.x25.ccitt_compat; + + /* initialize adapter */ + if (card->u.x.LAPB_hdlc){ + if (hdlc_configure(card, &u.cfg) != CMD_OK) + return -EIO; + }else{ + if (x25_configure(card, &u.cfg) != CMD_OK) + return -EIO; + } + + if ((x25_close_hdlc(card) != CMD_OK) || /* close HDLC link */ + (x25_set_dtr(card, 0) != CMD_OK)) /* drop DTR */ + return -EIO; + + /* Initialize protocol-specific fields of adapter data space */ + card->wandev.bps = conf->bps; + card->wandev.interface = conf->interface; + card->wandev.clocking = conf->clocking; + card->wandev.station = conf->station; + card->isr = &wpx_isr; + card->poll = NULL; //&wpx_poll; + card->disable_comm = &disable_comm; + card->exec = &wpx_exec; + card->wandev.update = &update; + card->wandev.new_if = &new_if; + card->wandev.del_if = &del_if; + + /* WARNING: This function cannot exit with an error + * after the change of state */ + card->wandev.state = WAN_DISCONNECTED; + + card->wandev.enable_tx_int = 0; + card->irq_dis_if_send_count = 0; + card->irq_dis_poll_count = 0; + card->u.x.tx_dev = NULL; + card->u.x.no_dev = 0; + + + /* Configure for S514 PCI Card */ + if (card->hw.type == SDLA_S514) { + card->u.x.hdlc_buf_status = + (volatile unsigned char *) + (card->hw.dpmbase + X25_MB_VECTOR+ X25_MISC_HDLC_BITS); + }else{ + card->u.x.hdlc_buf_status = + (volatile unsigned char *)(card->hw.dpmbase + X25_MISC_HDLC_BITS); + } + + card->u.x.poll_device=NULL; + card->wandev.udp_port = conf->udp_port; + + /* Enable or disable call setup logging */ + if (conf->u.x25.logging == WANOPT_YES){ + printk(KERN_INFO "%s: Enabling Call Logging.\n", + card->devname); + card->u.x.logging = 1; + }else{ + card->u.x.logging = 0; + } + + /* Enable or disable modem status reporting */ + if (conf->u.x25.oob_on_modem == WANOPT_YES){ + printk(KERN_INFO "%s: Enabling OOB on Modem change.\n", + card->devname); + card->u.x.oob_on_modem = 1; + }else{ + card->u.x.oob_on_modem = 0; + } + + init_global_statistics(card); + + INIT_WORK(&card->u.x.x25_poll_work, (void *)wpx_poll, card); + + init_timer(&card->u.x.x25_timer); + card->u.x.x25_timer.data = (unsigned long)card; + card->u.x.x25_timer.function = x25_timer_routine; + + return 0; +} + +/*========================================================= + * WAN Device Driver Entry Points + *========================================================*/ + +/*============================================================ + * Name: update(), Update device status & statistics. + * + * Purpose: To provide debugging and statitical + * information to the /proc file system. + * /proc/net/wanrouter/wanpipe# + * + * Rationale: The /proc file system is used to collect + * information about the kernel and drivers. + * Using the /proc file system the user + * can see exactly what the sangoma drivers are + * doing. And in what state they are in. + * + * Description: Collect all driver statistical information + * and pass it to the top laywer. + * + * Since we have to execute a debugging command, + * to obtain firmware statitics, we trigger a + * UPDATE function within the timer interrtup. + * We wait until the timer update is complete. + * Once complete return the appropriate return + * code to indicate that the update was successful. + * + * Called by: device_stat() in wanmain.c + * + * Assumptions: + * + * Warnings: This function will degrade the performance + * of the router, since it uses the mailbox. + * + * Return: 0 OK + * <0 Failed (or busy). + */ + +static int update(struct wan_device* wandev) +{ + volatile sdla_t* card; + TX25Status* status; + unsigned long timeout; + + /* sanity checks */ + if ((wandev == NULL) || (wandev->private == NULL)) + return -EFAULT; + + if (wandev->state == WAN_UNCONFIGURED) + return -ENODEV; + + if (test_bit(SEND_CRIT, (void*)&wandev->critical)) + return -EAGAIN; + + if (!wandev->dev) + return -ENODEV; + + card = wandev->private; + status = card->flags; + + card->u.x.timer_int_enabled |= TMR_INT_ENABLED_UPDATE; + status->imask |= INTR_ON_TIMER; + timeout = jiffies; + + for (;;){ + if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE)){ + break; + } + if ((jiffies-timeout) > 1*HZ){ + card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE; + return -EAGAIN; + } + } + return 0; +} + + +/*=================================================================== + * Name: new_if + * + * Purpose: To allocate and initialize resources for a + * new logical channel. + * + * Rationale: A new channel can be added dynamically via + * ioctl call. + * + * Description: Allocate a private channel structure, x25_channel_t. + * Parse the user interface options from wanpipe#.conf + * configuration file. + * Bind the private are into the network device private + * area pointer (dev->priv). + * Prepare the network device structure for registration. + * + * Called by: ROUTER_IFNEW Ioctl call, from wanrouter_ioctl() + * (wanmain.c) + * + * Assumptions: None + * + * Warnings: None + * + * Return: 0 Ok + * <0 Failed (channel will not be created) + */ +static int new_if(struct wan_device* wandev, struct net_device* dev, + wanif_conf_t* conf) +{ + sdla_t* card = wandev->private; + x25_channel_t* chan; + int err = 0; + + if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)){ + printk(KERN_INFO "%s: invalid interface name!\n", + card->devname); + return -EINVAL; + } + + if(card->wandev.new_if_cnt++ > 0 && card->u.x.LAPB_hdlc) { + printk(KERN_INFO "%s: Error: Running LAPB HDLC Mode !\n", + card->devname); + printk(KERN_INFO + "%s: Maximum number of network interfaces must be one !\n", + card->devname); + return -EEXIST; + } + + /* allocate and initialize private data */ + chan = kmalloc(sizeof(x25_channel_t), GFP_ATOMIC); + if (chan == NULL){ + return -ENOMEM; + } + + memset(chan, 0, sizeof(x25_channel_t)); + + /* Bug Fix: Seg Err on PVC startup + * It must be here since bind_lcn_to_dev expects + * it bellow */ + dev->priv = chan; + + strcpy(chan->name, conf->name); + chan->card = card; + chan->dev = dev; + chan->common.sk = NULL; + chan->common.func = NULL; + chan->common.rw_bind = 0; + chan->tx_skb = chan->rx_skb = NULL; + + /* verify media address */ + if (conf->addr[0] == '@'){ /* SVC */ + chan->common.svc = 1; + strncpy(chan->addr, &conf->addr[1], WAN_ADDRESS_SZ); + + /* Set channel timeouts (default if not specified) */ + chan->idle_timeout = (conf->idle_timeout) ? + conf->idle_timeout : 90; + chan->hold_timeout = (conf->hold_timeout) ? + conf->hold_timeout : 10; + + }else if (is_digit(conf->addr[0])){ /* PVC */ + int lcn = dec_to_uint(conf->addr, 0); + + if ((lcn >= card->u.x.lo_pvc) && (lcn <= card->u.x.hi_pvc)){ + bind_lcn_to_dev (card, dev, lcn); + }else{ + printk(KERN_ERR + "%s: PVC %u is out of range on interface %s!\n", + wandev->name, lcn, chan->name); + err = -EINVAL; + } + }else{ + printk(KERN_ERR + "%s: invalid media address on interface %s!\n", + wandev->name, chan->name); + err = -EINVAL; + } + + if(strcmp(conf->usedby, "WANPIPE") == 0){ + printk(KERN_INFO "%s: Running in WANPIPE mode %s\n", + wandev->name, chan->name); + chan->common.usedby = WANPIPE; + chan->protocol = htons(ETH_P_IP); + + }else if(strcmp(conf->usedby, "API") == 0){ + chan->common.usedby = API; + printk(KERN_INFO "%s: Running in API mode %s\n", + wandev->name, chan->name); + chan->protocol = htons(X25_PROT); + } + + + if (err){ + kfree(chan); + dev->priv = NULL; + return err; + } + + chan->enable_IPX = conf->enable_IPX; + + if (chan->enable_IPX) + chan->protocol = htons(ETH_P_IPX); + + if (conf->network_number) + chan->network_number = conf->network_number; + else + chan->network_number = 0xDEADBEEF; + + /* prepare network device data space for registration */ + strcpy(dev->name,chan->name); + + dev->init = &if_init; + + init_x25_channel_struct(chan); + + return 0; +} + +/*=================================================================== + * Name: del_if(), Remove a logical channel. + * + * Purpose: To dynamically remove a logical channel. + * + * Rationale: Each logical channel should be dynamically + * removable. This functin is called by an + * IOCTL_IFDEL ioctl call or shutdown(). + * + * Description: Do nothing. + * + * Called by: IOCTL_IFDEL : wanrouter_ioctl() from wanmain.c + * shutdown() from sdlamain.c + * + * Assumptions: + * + * Warnings: + * + * Return: 0 Ok. Void function. + */ + +//FIXME Del IF Should be taken out now. + +static int del_if(struct wan_device* wandev, struct net_device* dev) +{ + return 0; +} + + +/*============================================================ + * Name: wpx_exec + * + * Description: Execute adapter interface command. + * This option is currently dissabled. + *===========================================================*/ + +static int wpx_exec (struct sdla* card, void* u_cmd, void* u_data) +{ + return 0; +} + +/*============================================================ + * Name: disable_comm + * + * Description: Disable communications during shutdown. + * Dont check return code because there is + * nothing we can do about it. + * + * Warning: Dev and private areas are gone at this point. + *===========================================================*/ + +static void disable_comm(sdla_t* card) +{ + disable_comm_shutdown(card); + del_timer(&card->u.x.x25_timer); + return; +} + + +/*============================================================ + * Network Device Interface + *===========================================================*/ + +/*=================================================================== + * Name: if_init(), Netowrk Interface Initialization + * + * Purpose: To initialize a network interface device structure. + * + * Rationale: During network interface startup, the if_init + * is called by the kernel to initialize the + * netowrk device structure. Thus a driver + * can customze a network device. + * + * Description: Initialize the netowrk device call back + * routines. This is where we tell the kernel + * which function to use when it wants to send + * via our interface. + * Furthermore, we initialize the device flags, + * MTU and physical address of the board. + * + * Called by: Kernel (/usr/src/linux/net/core/dev.c) + * (dev->init()) + * + * Assumptions: None + * + * Warnings: None + * + * Return: 0 Ok : Void function. + */ +static int if_init(struct net_device* dev) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + struct wan_device* wandev = &card->wandev; + + /* Initialize device driver entry points */ + dev->open = &if_open; + dev->stop = &if_close; + dev->hard_header = &if_header; + dev->rebuild_header = &if_rebuild_hdr; + dev->hard_start_xmit = &if_send; + dev->get_stats = &if_stats; + dev->tx_timeout = &if_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + + /* Initialize media-specific parameters */ + dev->type = ARPHRD_PPP; /* ARP h/w type */ + dev->flags |= IFF_POINTOPOINT; + dev->flags |= IFF_NOARP; + + if (chan->common.usedby == API){ + dev->mtu = X25_CHAN_MTU+sizeof(x25api_hdr_t); + }else{ + dev->mtu = card->wandev.mtu; + } + + dev->hard_header_len = X25_HRDHDR_SZ; /* media header length */ + dev->addr_len = 2; /* hardware address length */ + + if (!chan->common.svc){ + *(unsigned short*)dev->dev_addr = htons(chan->common.lcn); + } + + /* Initialize hardware parameters (just for reference) */ + dev->irq = wandev->irq; + dev->dma = wandev->dma; + dev->base_addr = wandev->ioport; + dev->mem_start = (unsigned long)wandev->maddr; + dev->mem_end = wandev->maddr + wandev->msize - 1; + + /* Set transmit buffer queue length */ + dev->tx_queue_len = 100; + SET_MODULE_OWNER(dev); + + /* FIXME Why are we doing this */ + set_chan_state(dev, WAN_DISCONNECTED); + return 0; +} + + +/*=================================================================== + * Name: if_open(), Open/Bring up the Netowrk Interface + * + * Purpose: To bring up a network interface. + * + * Rationale: + * + * Description: Open network interface. + * o prevent module from unloading by incrementing use count + * o if link is disconnected then initiate connection + * + * Called by: Kernel (/usr/src/linux/net/core/dev.c) + * (dev->open()) + * + * Assumptions: None + * + * Warnings: None + * + * Return: 0 Ok + * <0 Failure: Interface will not come up. + */ + +static int if_open(struct net_device* dev) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + struct timeval tv; + unsigned long smp_flags; + + if (netif_running(dev)) + return -EBUSY; + + chan->tq_working = 0; + + /* Initialize the workqueue */ + INIT_WORK(&chan->common.wanpipe_work, (void *)x25api_bh, dev); + + /* Allocate and initialize BH circular buffer */ + /* Add 1 to MAX_BH_BUFF so we don't have test with (MAX_BH_BUFF-1) */ + chan->bh_head = kmalloc((sizeof(bh_data_t)*(MAX_BH_BUFF+1)),GFP_ATOMIC); + + if (chan->bh_head == NULL){ + printk(KERN_INFO "%s: ERROR, failed to allocate memory ! BH_BUFFERS !\n", + card->devname); + + return -ENOBUFS; + } + memset(chan->bh_head,0,(sizeof(bh_data_t)*(MAX_BH_BUFF+1))); + atomic_set(&chan->bh_buff_used, 0); + + /* Increment the number of interfaces */ + ++card->u.x.no_dev; + + wanpipe_open(card); + + /* LAPB protocol only uses one interface, thus + * start the protocol after it comes up. */ + if (card->u.x.LAPB_hdlc){ + if (card->open_cnt == 1){ + TX25Status* status = card->flags; + S508_S514_lock(card, &smp_flags); + x25_set_intr_mode(card, INTR_ON_TIMER); + status->imask &= ~INTR_ON_TIMER; + S508_S514_unlock(card, &smp_flags); + } + }else{ + /* X25 can have multiple interfaces thus, start the + * protocol once all interfaces are up */ + + //FIXME: There is a bug here. If interface is + //brought down and up, it will try to enable comm. + if (card->open_cnt == card->u.x.num_of_ch){ + + S508_S514_lock(card, &smp_flags); + connect(card); + S508_S514_unlock(card, &smp_flags); + + mod_timer(&card->u.x.x25_timer, jiffies + HZ); + } + } + /* Device is not up until the we are in connected state */ + do_gettimeofday( &tv ); + chan->router_start_time = tv.tv_sec; + + netif_start_queue(dev); + + return 0; +} + +/*=================================================================== + * Name: if_close(), Close/Bring down the Netowrk Interface + * + * Purpose: To bring down a network interface. + * + * Rationale: + * + * Description: Close network interface. + * o decrement use module use count + * + * Called by: Kernel (/usr/src/linux/net/core/dev.c) + * (dev->close()) + * ifconfig <name> down: will trigger the kernel + * which will call this function. + * + * Assumptions: None + * + * Warnings: None + * + * Return: 0 Ok + * <0 Failure: Interface will not exit properly. + */ +static int if_close(struct net_device* dev) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + unsigned long smp_flags; + + netif_stop_queue(dev); + + if ((chan->common.state == WAN_CONNECTED) || + (chan->common.state == WAN_CONNECTING)){ + S508_S514_lock(card, &smp_flags); + chan_disc(dev); + S508_S514_unlock(card, &smp_flags); + } + + wanpipe_close(card); + + S508_S514_lock(card, &smp_flags); + if (chan->bh_head){ + int i; + struct sk_buff *skb; + + for (i=0; i<(MAX_BH_BUFF+1); i++){ + skb = ((bh_data_t *)&chan->bh_head[i])->skb; + if (skb != NULL){ + dev_kfree_skb_any(skb); + } + } + kfree(chan->bh_head); + chan->bh_head=NULL; + } + S508_S514_unlock(card, &smp_flags); + + /* If this is the last close, disconnect physical link */ + if (!card->open_cnt){ + S508_S514_lock(card, &smp_flags); + disconnect(card); + x25_set_intr_mode(card, 0); + S508_S514_unlock(card, &smp_flags); + } + + /* Decrement the number of interfaces */ + --card->u.x.no_dev; + return 0; +} + +/*====================================================================== + * Build media header. + * o encapsulate packet according to encapsulation type. + * + * The trick here is to put packet type (Ethertype) into 'protocol' + * field of the socket buffer, so that we don't forget it. + * If encapsulation fails, set skb->protocol to 0 and discard + * packet later. + * + * Return: media header length. + *======================================================================*/ + +static int if_header(struct sk_buff* skb, struct net_device* dev, + unsigned short type, void* daddr, void* saddr, + unsigned len) +{ + x25_channel_t* chan = dev->priv; + int hdr_len = dev->hard_header_len; + + skb->protocol = htons(type); + if (!chan->protocol){ + hdr_len = wanrouter_encapsulate(skb, dev, type); + if (hdr_len < 0){ + hdr_len = 0; + skb->protocol = htons(0); + } + } + return hdr_len; +} + +/*=============================================================== + * Re-build media header. + * + * Return: 1 physical address resolved. + * 0 physical address not resolved + *==============================================================*/ + +static int if_rebuild_hdr (struct sk_buff* skb) +{ + struct net_device *dev = skb->dev; + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + + printk(KERN_INFO "%s: rebuild_header() called for interface %s!\n", + card->devname, dev->name); + return 1; +} + + +/*============================================================================ + * Handle transmit timeout event from netif watchdog + */ +static void if_tx_timeout(struct net_device *dev) +{ + x25_channel_t* chan = dev->priv; + sdla_t *card = chan->card; + + /* If our device stays busy for at least 5 seconds then we will + * kick start the device by making dev->tbusy = 0. We expect + * that our device never stays busy more than 5 seconds. So this + * is only used as a last resort. + */ + + ++chan->if_send_stat.if_send_tbusy_timeout; + printk (KERN_INFO "%s: Transmit timed out on %s\n", + card->devname, dev->name); + netif_wake_queue (dev); +} + + +/*========================================================================= + * Send a packet on a network interface. + * o set tbusy flag (marks start of the transmission). + * o check link state. If link is not up, then drop the packet. + * o check channel status. If it's down then initiate a call. + * o pass a packet to corresponding WAN device. + * o free socket buffer + * + * Return: 0 complete (socket buffer must be freed) + * non-0 packet may be re-transmitted (tbusy must be set) + * + * Notes: + * 1. This routine is called either by the protocol stack or by the "net + * bottom half" (with interrupts enabled). + * 2. Setting tbusy flag will inhibit further transmit requests from the + * protocol stack and can be used for flow control with protocol layer. + * + *========================================================================*/ + +static int if_send(struct sk_buff* skb, struct net_device* dev) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + TX25Status* status = card->flags; + int udp_type; + unsigned long smp_flags=0; + + ++chan->if_send_stat.if_send_entry; + + netif_stop_queue(dev); + + /* No need to check frame length, since socket code + * will perform the check for us */ + + chan->tick_counter = jiffies; + + /* Critical region starts here */ + S508_S514_lock(card, &smp_flags); + + if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)){ + printk(KERN_INFO "Hit critical in if_send()! %lx\n",card->wandev.critical); + goto if_send_crit_exit; + } + + udp_type = udp_pkt_type(skb, card); + + if(udp_type != UDP_INVALID_TYPE) { + + if(store_udp_mgmt_pkt(udp_type, UDP_PKT_FRM_STACK, card, dev, skb, + chan->common.lcn)) { + + status->imask |= INTR_ON_TIMER; + if (udp_type == UDP_XPIPE_TYPE){ + chan->if_send_stat.if_send_PIPE_request++; + } + } + netif_start_queue(dev); + clear_bit(SEND_CRIT,(void*)&card->wandev.critical); + S508_S514_unlock(card, &smp_flags); + return 0; + } + + if (chan->transmit_length){ + //FIXME: This check doesn't make sense any more + if (chan->common.state != WAN_CONNECTED){ + chan->transmit_length=0; + atomic_set(&chan->common.driver_busy,0); + }else{ + netif_stop_queue(dev); + ++card->u.x.tx_interrupts_pending; + status->imask |= INTR_ON_TX_FRAME; + clear_bit(SEND_CRIT,(void*)&card->wandev.critical); + S508_S514_unlock(card, &smp_flags); + return 1; + } + } + + if (card->wandev.state != WAN_CONNECTED){ + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + ++chan->if_send_stat.if_send_wan_disconnected; + + }else if ( chan->protocol && (chan->protocol != skb->protocol)){ + printk(KERN_INFO + "%s: unsupported Ethertype 0x%04X on interface %s!\n", + chan->name, htons(skb->protocol), dev->name); + + printk(KERN_INFO "PROTO %Xn", htons(chan->protocol)); + ++chan->ifstats.tx_errors; + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + ++chan->if_send_stat.if_send_protocol_error; + + }else switch (chan->common.state){ + + case WAN_DISCONNECTED: + /* Try to establish connection. If succeded, then start + * transmission, else drop a packet. + */ + if (chan->common.usedby == API){ + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + break; + }else{ + if (chan_connect(dev) != 0){ + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + break; + } + } + /* fall through */ + + case WAN_CONNECTED: + if( skb->protocol == htons(ETH_P_IPX)) { + if(chan->enable_IPX) { + switch_net_numbers( skb->data, + chan->network_number, 0); + } else { + ++card->wandev.stats.tx_dropped; + ++chan->ifstats.tx_dropped; + ++chan->if_send_stat.if_send_protocol_error; + goto if_send_crit_exit; + } + } + /* We never drop here, if cannot send than, copy + * a packet into a transmit buffer + */ + chan_send(dev, skb->data, skb->len, 0); + break; + + default: + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + break; + } + + +if_send_crit_exit: + + dev_kfree_skb_any(skb); + + netif_start_queue(dev); + clear_bit(SEND_CRIT,(void*)&card->wandev.critical); + S508_S514_unlock(card, &smp_flags); + return 0; +} + +/*============================================================================ + * Setup so that a frame can be transmitted on the occurrence of a transmit + * interrupt. + *===========================================================================*/ + +static void setup_for_delayed_transmit(struct net_device* dev, void* buf, + unsigned len) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + TX25Status* status = card->flags; + + ++chan->if_send_stat.if_send_adptr_bfrs_full; + + if(chan->transmit_length) { + printk(KERN_INFO "%s: Error, transmit length set in delayed transmit!\n", + card->devname); + return; + } + + if (chan->common.usedby == API){ + if (len > X25_CHAN_MTU+sizeof(x25api_hdr_t)) { + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + printk(KERN_INFO "%s: Length is too big for delayed transmit\n", + card->devname); + return; + } + }else{ + if (len > X25_MAX_DATA) { + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + printk(KERN_INFO "%s: Length is too big for delayed transmit\n", + card->devname); + return; + } + } + + chan->transmit_length = len; + atomic_set(&chan->common.driver_busy,1); + memcpy(chan->transmit_buffer, buf, len); + + ++chan->if_send_stat.if_send_tx_int_enabled; + + /* Enable Transmit Interrupt */ + ++card->u.x.tx_interrupts_pending; + status->imask |= INTR_ON_TX_FRAME; +} + + +/*=============================================================== + * net_device_stats + * + * Get ethernet-style interface statistics. + * Return a pointer to struct enet_statistics. + * + *==============================================================*/ +static struct net_device_stats *if_stats(struct net_device* dev) +{ + x25_channel_t *chan = dev->priv; + + if(chan == NULL) + return NULL; + + return &chan->ifstats; +} + + +/* + * Interrupt Handlers + */ + +/* + * X.25 Interrupt Service Routine. + */ + +static void wpx_isr (sdla_t* card) +{ + TX25Status* status = card->flags; + + card->in_isr = 1; + ++card->statistics.isr_entry; + + if (test_bit(PERI_CRIT,(void*)&card->wandev.critical)){ + card->in_isr=0; + status->iflags = 0; + return; + } + + if (test_bit(SEND_CRIT, (void*)&card->wandev.critical)){ + + printk(KERN_INFO "%s: wpx_isr: wandev.critical set to 0x%02lx, int type = 0x%02x\n", + card->devname, card->wandev.critical, status->iflags); + card->in_isr = 0; + status->iflags = 0; + return; + } + + /* For all interrupts set the critical flag to CRITICAL_RX_INTR. + * If the if_send routine is called with this flag set it will set + * the enable transmit flag to 1. (for a delayed interrupt) + */ + switch (status->iflags){ + + case RX_INTR_PENDING: /* receive interrupt */ + rx_intr(card); + break; + + case TX_INTR_PENDING: /* transmit interrupt */ + tx_intr(card); + break; + + case MODEM_INTR_PENDING: /* modem status interrupt */ + status_intr(card); + break; + + case X25_ASY_TRANS_INTR_PENDING: /* network event interrupt */ + event_intr(card); + break; + + case TIMER_INTR_PENDING: + timer_intr(card); + break; + + default: /* unwanted interrupt */ + spur_intr(card); + } + + card->in_isr = 0; + status->iflags = 0; /* clear interrupt condition */ +} + +/* + * Receive interrupt handler. + * This routine handles fragmented IP packets using M-bit according to the + * RFC1356. + * o map ligical channel number to network interface. + * o allocate socket buffer or append received packet to the existing one. + * o if M-bit is reset (i.e. it's the last packet in a sequence) then + * decapsulate packet and pass socket buffer to the protocol stack. + * + * Notes: + * 1. When allocating a socket buffer, if M-bit is set then more data is + * coming and we have to allocate buffer for the maximum IP packet size + * expected on this channel. + * 2. If something goes wrong and X.25 packet has to be dropped (e.g. no + * socket buffers available) the whole packet sequence must be discarded. + */ + +static void rx_intr (sdla_t* card) +{ + TX25Mbox* rxmb = card->rxmb; + unsigned lcn = rxmb->cmd.lcn; + struct net_device* dev = find_channel(card,lcn); + x25_channel_t* chan; + struct sk_buff* skb=NULL; + + if (dev == NULL){ + /* Invalid channel, discard packet */ + printk(KERN_INFO "%s: receiving on orphaned LCN %d!\n", + card->devname, lcn); + return; + } + + chan = dev->priv; + chan->i_timeout_sofar = jiffies; + + + /* Copy the data from the board, into an + * skb buffer + */ + if (wanpipe_pull_data_in_skb(card,dev,&skb)){ + ++chan->ifstats.rx_dropped; + ++card->wandev.stats.rx_dropped; + ++chan->rx_intr_stat.rx_intr_no_socket; + ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; + return; + } + + dev->last_rx = jiffies; /* timestamp */ + + + /* ------------ API ----------------*/ + + if (chan->common.usedby == API){ + + if (bh_enqueue(dev, skb)){ + ++chan->ifstats.rx_dropped; + ++card->wandev.stats.rx_dropped; + ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; + dev_kfree_skb_any(skb); + return; + } + + ++chan->ifstats.rx_packets; + chan->ifstats.rx_bytes += skb->len; + + + chan->rx_skb = NULL; + if (!test_and_set_bit(0, &chan->tq_working)){ + wanpipe_queue_work(&chan->common.wanpipe_work); + } + return; + } + + + /* ------------- WANPIPE -------------------*/ + + /* set rx_skb to NULL so we won't access it later when kernel already owns it */ + chan->rx_skb=NULL; + + /* Decapsulate packet, if necessary */ + if (!skb->protocol && !wanrouter_type_trans(skb, dev)){ + /* can't decapsulate packet */ + dev_kfree_skb_any(skb); + ++chan->ifstats.rx_errors; + ++chan->ifstats.rx_dropped; + ++card->wandev.stats.rx_dropped; + ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; + + }else{ + if( handle_IPXWAN(skb->data, chan->name, + chan->enable_IPX, chan->network_number, + skb->protocol)){ + + if( chan->enable_IPX ){ + if(chan_send(dev, skb->data, skb->len,0)){ + chan->tx_skb = skb; + }else{ + dev_kfree_skb_any(skb); + ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; + } + }else{ + /* increment IPX packet dropped statistic */ + ++chan->ifstats.rx_dropped; + ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; + } + }else{ + skb->mac.raw = skb->data; + chan->ifstats.rx_bytes += skb->len; + ++chan->ifstats.rx_packets; + ++chan->rx_intr_stat.rx_intr_bfr_passed_to_stack; + netif_rx(skb); + } + } + + return; +} + + +static int wanpipe_pull_data_in_skb(sdla_t *card, struct net_device *dev, + struct sk_buff **skb) +{ + void *bufptr; + TX25Mbox* rxmb = card->rxmb; + unsigned len = rxmb->cmd.length; /* packet length */ + unsigned qdm = rxmb->cmd.qdm; /* Q,D and M bits */ + x25_channel_t *chan = dev->priv; + struct sk_buff *new_skb = *skb; + + if (chan->common.usedby == WANPIPE){ + if (chan->drop_sequence){ + if (!(qdm & 0x01)){ + chan->drop_sequence = 0; + } + return 1; + } + new_skb = chan->rx_skb; + }else{ + /* Add on the API header to the received + * data + */ + len += sizeof(x25api_hdr_t); + } + + if (new_skb == NULL){ + int bufsize; + + if (chan->common.usedby == WANPIPE){ + bufsize = (qdm & 0x01) ? dev->mtu : len; + }else{ + bufsize = len; + } + + /* Allocate new socket buffer */ + new_skb = dev_alloc_skb(bufsize + dev->hard_header_len); + if (new_skb == NULL){ + printk(KERN_INFO "%s: no socket buffers available!\n", + card->devname); + chan->drop_sequence = 1; /* set flag */ + ++chan->ifstats.rx_dropped; + return 1; + } + } + + if (skb_tailroom(new_skb) < len){ + /* No room for the packet. Call off the whole thing! */ + dev_kfree_skb_any(new_skb); + if (chan->common.usedby == WANPIPE){ + chan->rx_skb = NULL; + if (qdm & 0x01){ + chan->drop_sequence = 1; + } + } + + printk(KERN_INFO "%s: unexpectedly long packet sequence " + "on interface %s!\n", card->devname, dev->name); + ++chan->ifstats.rx_length_errors; + return 1; + } + + bufptr = skb_put(new_skb,len); + + + if (chan->common.usedby == API){ + /* Fill in the x25api header + */ + x25api_t * api_data = (x25api_t*)bufptr; + api_data->hdr.qdm = rxmb->cmd.qdm; + api_data->hdr.cause = rxmb->cmd.cause; + api_data->hdr.diagn = rxmb->cmd.diagn; + api_data->hdr.length = rxmb->cmd.length; + memcpy(api_data->data, rxmb->data, rxmb->cmd.length); + }else{ + memcpy(bufptr, rxmb->data, len); + } + + new_skb->dev = dev; + + if (chan->common.usedby == API){ + new_skb->mac.raw = new_skb->data; + new_skb->protocol = htons(X25_PROT); + new_skb->pkt_type = WAN_PACKET_DATA; + }else{ + new_skb->protocol = chan->protocol; + chan->rx_skb = new_skb; + } + + /* If qdm bit is set, more data is coming + * thus, exit and wait for more data before + * sending the packet up. (Used by router only) + */ + if ((qdm & 0x01) && (chan->common.usedby == WANPIPE)) + return 1; + + *skb = new_skb; + + return 0; +} + +/*=============================================================== + * tx_intr + * + * Transmit interrupt handler. + * For each dev, check that there is something to send. + * If data available, transmit. + * + *===============================================================*/ + +static void tx_intr (sdla_t* card) +{ + struct net_device *dev; + TX25Status* status = card->flags; + unsigned char more_to_tx=0; + x25_channel_t *chan=NULL; + int i=0; + + if (card->u.x.tx_dev == NULL){ + card->u.x.tx_dev = card->wandev.dev; + } + + dev = card->u.x.tx_dev; + + for (;;){ + + chan = dev->priv; + if (chan->transmit_length){ + /* Device was set to transmit, check if the TX + * buffers are available + */ + if (chan->common.state != WAN_CONNECTED){ + chan->transmit_length = 0; + atomic_set(&chan->common.driver_busy,0); + chan->tx_offset=0; + if (netif_queue_stopped(dev)){ + if (chan->common.usedby == API){ + netif_start_queue(dev); + wakeup_sk_bh(dev); + }else{ + netif_wake_queue(dev); + } + } + dev = move_dev_to_next(card,dev); + break; + } + + if ((status->cflags[chan->ch_idx] & 0x40 || card->u.x.LAPB_hdlc) && + (*card->u.x.hdlc_buf_status & 0x40) ){ + /* Tx buffer available, we can send */ + + if (tx_intr_send(card, dev)){ + more_to_tx=1; + } + + /* If more than one interface present, move the + * device pointer to the next interface, so on the + * next TX interrupt we will try sending from it. + */ + dev = move_dev_to_next(card,dev); + break; + }else{ + /* Tx buffers not available, but device set + * the TX interrupt. Set more_to_tx and try + * to transmit for other devices. + */ + more_to_tx=1; + dev = move_dev_to_next(card,dev); + } + + }else{ + /* This device was not set to transmit, + * go to next + */ + dev = move_dev_to_next(card,dev); + } + + if (++i == card->u.x.no_dev){ + if (!more_to_tx){ + DBG_PRINTK(KERN_INFO "%s: Nothing to Send in TX INTR\n", + card->devname); + } + break; + } + + } //End of FOR + + card->u.x.tx_dev = dev; + + if (!more_to_tx){ + /* if any other interfaces have transmit interrupts pending, */ + /* do not disable the global transmit interrupt */ + if (!(--card->u.x.tx_interrupts_pending)){ + status->imask &= ~INTR_ON_TX_FRAME; + } + } + return; +} + +/*=============================================================== + * move_dev_to_next + * + * + *===============================================================*/ + + +struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev) +{ + if (card->u.x.no_dev != 1){ + if (!*((struct net_device **)dev->priv)) + return card->wandev.dev; + else + return *((struct net_device **)dev->priv); + } + return dev; +} + +/*=============================================================== + * tx_intr_send + * + * + *===============================================================*/ + +static int tx_intr_send(sdla_t *card, struct net_device *dev) +{ + x25_channel_t* chan = dev->priv; + + if (chan_send (dev,chan->transmit_buffer,chan->transmit_length,1)){ + + /* Packet was split up due to its size, do not disable + * tx_intr + */ + return 1; + } + + chan->transmit_length=0; + atomic_set(&chan->common.driver_busy,0); + chan->tx_offset=0; + + /* If we are in API mode, wakeup the + * sock BH handler, not the NET_BH */ + if (netif_queue_stopped(dev)){ + if (chan->common.usedby == API){ + netif_start_queue(dev); + wakeup_sk_bh(dev); + }else{ + netif_wake_queue(dev); + } + } + return 0; +} + + +/*=============================================================== + * timer_intr + * + * Timer interrupt handler. + * Check who called the timer interrupt and perform + * action accordingly. + * + *===============================================================*/ + +static void timer_intr (sdla_t *card) +{ + TX25Status* status = card->flags; + + if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC){ + + if (timer_intr_cmd_exec(card) == 0){ + card->u.x.timer_int_enabled &= + ~TMR_INT_ENABLED_CMD_EXEC; + } + + }else if(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UDP_PKT) { + + if ((*card->u.x.hdlc_buf_status & 0x40) && + card->u.x.udp_type == UDP_XPIPE_TYPE){ + + if(process_udp_mgmt_pkt(card)) { + card->u.x.timer_int_enabled &= + ~TMR_INT_ENABLED_UDP_PKT; + } + } + + }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_ACTIVE) { + + struct net_device *dev = card->u.x.poll_device; + x25_channel_t *chan = NULL; + + if (!dev){ + card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_ACTIVE; + return; + } + chan = dev->priv; + + printk(KERN_INFO + "%s: Closing down Idle link %s on LCN %d\n", + card->devname,chan->name,chan->common.lcn); + chan->i_timeout_sofar = jiffies; + chan_disc(dev); + card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_ACTIVE; + card->u.x.poll_device=NULL; + + }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_CONNECT_ON) { + + wanpipe_set_state(card, WAN_CONNECTED); + if (card->u.x.LAPB_hdlc){ + struct net_device *dev = card->wandev.dev; + set_chan_state(dev,WAN_CONNECTED); + send_delayed_cmd_result(card,dev,card->mbox); + } + + /* 0x8F enable all interrupts */ + x25_set_intr_mode(card, INTR_ON_RX_FRAME| + INTR_ON_TX_FRAME| + INTR_ON_MODEM_STATUS_CHANGE| + //INTR_ON_COMMAND_COMPLETE| + X25_ASY_TRANS_INTR_PENDING | + INTR_ON_TIMER | + DIRECT_RX_INTR_USAGE + ); + + status->imask &= ~INTR_ON_TX_FRAME; /* mask Tx interrupts */ + card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_CONNECT_ON; + + }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_CONNECT_OFF) { + + //printk(KERN_INFO "Poll connect, Turning OFF\n"); + disconnect(card); + card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_CONNECT_OFF; + + }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_DISCONNECT) { + + //printk(KERN_INFO "POll disconnect, trying to connect\n"); + connect(card); + card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_DISCONNECT; + + }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE){ + + if (*card->u.x.hdlc_buf_status & 0x40){ + x25_get_err_stats(card); + x25_get_stats(card); + card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE; + } + } + + if(!card->u.x.timer_int_enabled){ + //printk(KERN_INFO "Turning Timer Off \n"); + status->imask &= ~INTR_ON_TIMER; + } +} + +/*==================================================================== + * Modem status interrupt handler. + *===================================================================*/ +static void status_intr (sdla_t* card) +{ + + /* Added to avoid Modem status message flooding */ + static TX25ModemStatus last_stat; + + TX25Mbox* mbox = card->mbox; + TX25ModemStatus *modem_status; + struct net_device *dev; + x25_channel_t *chan; + int err; + + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_READ_MODEM_STATUS; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + if (err){ + x25_error(card, err, X25_READ_MODEM_STATUS, 0); + }else{ + + modem_status = (TX25ModemStatus*)mbox->data; + + /* Check if the last status was the same + * if it was, do NOT print message again */ + + if (last_stat.status != modem_status->status){ + + printk(KERN_INFO "%s: Modem Status Change: DCD=%s, CTS=%s\n", + card->devname,DCD(modem_status->status),CTS(modem_status->status)); + + last_stat.status = modem_status->status; + + if (card->u.x.oob_on_modem){ + + mbox->cmd.pktType = mbox->cmd.command; + mbox->cmd.result = 0x08; + + /* Send a OOB to all connected sockets */ + for (dev = card->wandev.dev; dev; + dev = *((struct net_device**)dev->priv)) { + chan=dev->priv; + if (chan->common.usedby == API){ + send_oob_msg(card,dev,mbox); + } + } + + /* The modem OOB message will probably kill the + * the link. If we don't clear the flag here, + * a deadlock could occur */ + if (atomic_read(&card->u.x.command_busy)){ + atomic_set(&card->u.x.command_busy,0); + } + } + } + } + + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_HDLC_LINK_STATUS; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + if (err){ + x25_error(card, err, X25_HDLC_LINK_STATUS, 0); + } + +} + +/*==================================================================== + * Network event interrupt handler. + *===================================================================*/ +static void event_intr (sdla_t* card) +{ + x25_fetch_events(card); +} + +/*==================================================================== + * Spurious interrupt handler. + * o print a warning + * o + *====================================================================*/ + +static void spur_intr (sdla_t* card) +{ + printk(KERN_INFO "%s: spurious interrupt!\n", card->devname); +} + + +/* + * Background Polling Routines + */ + +/*==================================================================== + * Main polling routine. + * This routine is repeatedly called by the WANPIPE 'thread' to allow for + * time-dependent housekeeping work. + * + * Notes: + * 1. This routine may be called on interrupt context with all interrupts + * enabled. Beware! + *====================================================================*/ + +static void wpx_poll (sdla_t *card) +{ + if (!card->wandev.dev){ + goto wpx_poll_exit; + } + + if (card->open_cnt != card->u.x.num_of_ch){ + goto wpx_poll_exit; + } + + if (test_bit(PERI_CRIT,&card->wandev.critical)){ + goto wpx_poll_exit; + } + + if (test_bit(SEND_CRIT,&card->wandev.critical)){ + goto wpx_poll_exit; + } + + switch(card->wandev.state){ + case WAN_CONNECTED: + poll_active(card); + break; + + case WAN_CONNECTING: + poll_connecting(card); + break; + + case WAN_DISCONNECTED: + poll_disconnected(card); + break; + } + +wpx_poll_exit: + clear_bit(POLL_CRIT,&card->wandev.critical); + return; +} + +static void trigger_x25_poll(sdla_t *card) +{ + schedule_work(&card->u.x.x25_poll_work); +} + +/*==================================================================== + * Handle physical link establishment phase. + * o if connection timed out, disconnect the link. + *===================================================================*/ + +static void poll_connecting (sdla_t* card) +{ + volatile TX25Status* status = card->flags; + + if (status->gflags & X25_HDLC_ABM){ + + timer_intr_exec (card, TMR_INT_ENABLED_POLL_CONNECT_ON); + + }else if ((jiffies - card->state_tick) > CONNECT_TIMEOUT){ + + timer_intr_exec (card, TMR_INT_ENABLED_POLL_CONNECT_OFF); + + } +} + +/*==================================================================== + * Handle physical link disconnected phase. + * o if hold-down timeout has expired and there are open interfaces, + * connect link. + *===================================================================*/ + +static void poll_disconnected (sdla_t* card) +{ + struct net_device *dev; + x25_channel_t *chan; + TX25Status* status = card->flags; + + if (!card->u.x.LAPB_hdlc && card->open_cnt && + ((jiffies - card->state_tick) > HOLD_DOWN_TIME)){ + timer_intr_exec(card, TMR_INT_ENABLED_POLL_DISCONNECT); + } + + + if ((dev=card->wandev.dev) == NULL) + return; + + if ((chan=dev->priv) == NULL) + return; + + if (chan->common.usedby == API && + atomic_read(&chan->common.command) && + card->u.x.LAPB_hdlc){ + + if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) + card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; + + if (!(status->imask & INTR_ON_TIMER)) + status->imask |= INTR_ON_TIMER; + } + +} + +/*==================================================================== + * Handle active link phase. + * o fetch X.25 asynchronous events. + * o kick off transmission on all interfaces. + *===================================================================*/ + +static void poll_active (sdla_t* card) +{ + struct net_device* dev; + TX25Status* status = card->flags; + + for (dev = card->wandev.dev; dev; + dev = *((struct net_device **)dev->priv)){ + x25_channel_t* chan = dev->priv; + + /* If SVC has been idle long enough, close virtual circuit */ + if ( chan->common.svc && + chan->common.state == WAN_CONNECTED && + chan->common.usedby == WANPIPE ){ + + if( (jiffies - chan->i_timeout_sofar) / HZ > chan->idle_timeout ){ + /* Close svc */ + card->u.x.poll_device=dev; + timer_intr_exec (card, TMR_INT_ENABLED_POLL_ACTIVE); + } + } + +#ifdef PRINT_DEBUG + chan->ifstats.tx_compressed = atomic_read(&chan->common.command); + chan->ifstats.tx_errors = chan->common.state; + chan->ifstats.rx_fifo_errors = atomic_read(&card->u.x.command_busy); + ++chan->ifstats.tx_bytes; + + chan->ifstats.rx_fifo_errors=atomic_read(&chan->common.disconnect); + chan->ifstats.multicast=atomic_read(&chan->bh_buff_used); + chan->ifstats.rx_length_errors=*card->u.x.hdlc_buf_status; +#endif + + if (chan->common.usedby == API && + atomic_read(&chan->common.command) && + !card->u.x.LAPB_hdlc){ + + if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) + card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; + + if (!(status->imask & INTR_ON_TIMER)) + status->imask |= INTR_ON_TIMER; + } + + if ((chan->common.usedby == API) && + atomic_read(&chan->common.disconnect)){ + + if (chan->common.state == WAN_DISCONNECTED){ + atomic_set(&chan->common.disconnect,0); + return; + } + + atomic_set(&chan->common.command,X25_CLEAR_CALL); + if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) + card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; + + if (!(status->imask & INTR_ON_TIMER)) + status->imask |= INTR_ON_TIMER; + } + } +} + +static void timer_intr_exec(sdla_t *card, unsigned char TYPE) +{ + TX25Status* status = card->flags; + card->u.x.timer_int_enabled |= TYPE; + if (!(status->imask & INTR_ON_TIMER)) + status->imask |= INTR_ON_TIMER; +} + + +/*==================================================================== + * SDLA Firmware-Specific Functions + * + * Almost all X.25 commands can unexpetedly fail due to so called 'X.25 + * asynchronous events' such as restart, interrupt, incoming call request, + * call clear request, etc. They can't be ignored and have to be delt with + * immediately. To tackle with this problem we execute each interface + * command in a loop until good return code is received or maximum number + * of retries is reached. Each interface command returns non-zero return + * code, an asynchronous event/error handler x25_error() is called. + *====================================================================*/ + +/*==================================================================== + * Read X.25 firmware version. + * Put code version as ASCII string in str. + *===================================================================*/ + +static int x25_get_version (sdla_t* card, char* str) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_READ_CODE_VERSION; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && + x25_error(card, err, X25_READ_CODE_VERSION, 0)); + + if (!err && str) + { + int len = mbox->cmd.length; + + memcpy(str, mbox->data, len); + str[len] = '\0'; + } + return err; +} + +/*==================================================================== + * Configure adapter. + *===================================================================*/ + +static int x25_configure (sdla_t* card, TX25Config* conf) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do{ + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + memcpy(mbox->data, (void*)conf, sizeof(TX25Config)); + mbox->cmd.length = sizeof(TX25Config); + mbox->cmd.command = X25_SET_CONFIGURATION; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_SET_CONFIGURATION, 0)); + return err; +} + +/*==================================================================== + * Configure adapter for HDLC only. + *===================================================================*/ + +static int hdlc_configure (sdla_t* card, TX25Config* conf) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do{ + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + memcpy(mbox->data, (void*)conf, sizeof(TX25Config)); + mbox->cmd.length = sizeof(TX25Config); + mbox->cmd.command = X25_HDLC_SET_CONFIG; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_SET_CONFIGURATION, 0)); + + return err; +} + +static int set_hdlc_level (sdla_t* card) +{ + + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do{ + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = SET_PROTOCOL_LEVEL; + mbox->cmd.length = 1; + mbox->data[0] = HDLC_LEVEL; //| DO_HDLC_LEVEL_ERROR_CHECKING; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, SET_PROTOCOL_LEVEL, 0)); + + return err; +} + + + +/*==================================================================== + * Get communications error statistics. + *====================================================================*/ + +static int x25_get_err_stats (sdla_t* card) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_HDLC_READ_COMM_ERR; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_HDLC_READ_COMM_ERR, 0)); + + if (!err) + { + THdlcCommErr* stats = (void*)mbox->data; + + card->wandev.stats.rx_over_errors = stats->rxOverrun; + card->wandev.stats.rx_crc_errors = stats->rxBadCrc; + card->wandev.stats.rx_missed_errors = stats->rxAborted; + card->wandev.stats.tx_aborted_errors = stats->txAborted; + } + return err; +} + +/*==================================================================== + * Get protocol statistics. + *===================================================================*/ + +static int x25_get_stats (sdla_t* card) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_READ_STATISTICS; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_READ_STATISTICS, 0)) ; + + if (!err) + { + TX25Stats* stats = (void*)mbox->data; + + card->wandev.stats.rx_packets = stats->rxData; + card->wandev.stats.tx_packets = stats->txData; + } + return err; +} + +/*==================================================================== + * Close HDLC link. + *===================================================================*/ + +static int x25_close_hdlc (sdla_t* card) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_HDLC_LINK_CLOSE; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_CLOSE, 0)); + + return err; +} + + +/*==================================================================== + * Open HDLC link. + *===================================================================*/ + +static int x25_open_hdlc (sdla_t* card) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_HDLC_LINK_OPEN; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_OPEN, 0)); + + return err; +} + +/*===================================================================== + * Setup HDLC link. + *====================================================================*/ +static int x25_setup_hdlc (sdla_t* card) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_HDLC_LINK_SETUP; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_SETUP, 0)); + + return err; +} + +/*==================================================================== + * Set (raise/drop) DTR. + *===================================================================*/ + +static int x25_set_dtr (sdla_t* card, int dtr) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->data[0] = 0; + mbox->data[2] = 0; + mbox->data[1] = dtr ? 0x02 : 0x01; + mbox->cmd.length = 3; + mbox->cmd.command = X25_SET_GLOBAL_VARS; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_SET_GLOBAL_VARS, 0)); + + return err; +} + +/*==================================================================== + * Set interrupt mode. + *===================================================================*/ + +static int x25_set_intr_mode (sdla_t* card, int mode) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->data[0] = mode; + if (card->hw.fwid == SFID_X25_508){ + mbox->data[1] = card->hw.irq; + mbox->data[2] = 2; + mbox->cmd.length = 3; + }else { + mbox->cmd.length = 1; + } + mbox->cmd.command = X25_SET_INTERRUPT_MODE; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_SET_INTERRUPT_MODE, 0)); + + return err; +} + +/*==================================================================== + * Read X.25 channel configuration. + *===================================================================*/ + +static int x25_get_chan_conf (sdla_t* card, x25_channel_t* chan) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int lcn = chan->common.lcn; + int err; + + do{ + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.lcn = lcn; + mbox->cmd.command = X25_READ_CHANNEL_CONFIG; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_READ_CHANNEL_CONFIG, lcn)); + + if (!err) + { + TX25Status* status = card->flags; + + /* calculate an offset into the array of status bytes */ + if (card->u.x.hi_svc <= X25_MAX_CHAN){ + + chan->ch_idx = lcn - 1; + + }else{ + int offset; + + /* FIX: Apr 14 2000 : Nenad Corbic + * The data field was being compared to 0x1F using + * '&&' instead of '&'. + * This caused X25API to fail for LCNs greater than 255. + */ + switch (mbox->data[0] & 0x1F) + { + case 0x01: + offset = status->pvc_map; break; + case 0x03: + offset = status->icc_map; break; + case 0x07: + offset = status->twc_map; break; + case 0x0B: + offset = status->ogc_map; break; + default: + offset = 0; + } + chan->ch_idx = lcn - 1 - offset; + } + + /* get actual transmit packet size on this channel */ + switch(mbox->data[1] & 0x38) + { + case 0x00: + chan->tx_pkt_size = 16; + break; + case 0x08: + chan->tx_pkt_size = 32; + break; + case 0x10: + chan->tx_pkt_size = 64; + break; + case 0x18: + chan->tx_pkt_size = 128; + break; + case 0x20: + chan->tx_pkt_size = 256; + break; + case 0x28: + chan->tx_pkt_size = 512; + break; + case 0x30: + chan->tx_pkt_size = 1024; + break; + } + if (card->u.x.logging) + printk(KERN_INFO "%s: X.25 packet size on LCN %d is %d.\n", + card->devname, lcn, chan->tx_pkt_size); + } + return err; +} + +/*==================================================================== + * Place X.25 call. + *====================================================================*/ + +static int x25_place_call (sdla_t* card, x25_channel_t* chan) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + char str[64]; + + + if (chan->protocol == htons(ETH_P_IP)){ + sprintf(str, "-d%s -uCC", chan->addr); + + }else if (chan->protocol == htons(ETH_P_IPX)){ + sprintf(str, "-d%s -u800000008137", chan->addr); + + } + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + strcpy(mbox->data, str); + mbox->cmd.length = strlen(str); + mbox->cmd.command = X25_PLACE_CALL; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_PLACE_CALL, 0)); + + if (!err){ + bind_lcn_to_dev (card, chan->dev, mbox->cmd.lcn); + } + return err; +} + +/*==================================================================== + * Accept X.25 call. + *====================================================================*/ + +static int x25_accept_call (sdla_t* card, int lcn, int qdm) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.lcn = lcn; + mbox->cmd.qdm = qdm; + mbox->cmd.command = X25_ACCEPT_CALL; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_ACCEPT_CALL, lcn)); + + return err; +} + +/*==================================================================== + * Clear X.25 call. + *====================================================================*/ + +static int x25_clear_call (sdla_t* card, int lcn, int cause, int diagn) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.lcn = lcn; + mbox->cmd.cause = cause; + mbox->cmd.diagn = diagn; + mbox->cmd.command = X25_CLEAR_CALL; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, X25_CLEAR_CALL, lcn)); + + return err; +} + +/*==================================================================== + * Send X.25 data packet. + *====================================================================*/ + +static int x25_send (sdla_t* card, int lcn, int qdm, int len, void* buf) +{ + TX25Mbox* mbox = card->mbox; + int retry = MAX_CMD_RETRY; + int err; + unsigned char cmd; + + if (card->u.x.LAPB_hdlc) + cmd = X25_HDLC_WRITE; + else + cmd = X25_WRITE; + + do + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + memcpy(mbox->data, buf, len); + mbox->cmd.length = len; + mbox->cmd.lcn = lcn; + + if (card->u.x.LAPB_hdlc){ + mbox->cmd.pf = qdm; + }else{ + mbox->cmd.qdm = qdm; + } + + mbox->cmd.command = cmd; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && retry-- && x25_error(card, err, cmd , lcn)); + + + /* If buffers are busy the return code for LAPB HDLC is + * 1. The above functions are looking for return code + * of X25RES_NOT_READY if busy. */ + + if (card->u.x.LAPB_hdlc && err == 1){ + err = X25RES_NOT_READY; + } + + return err; +} + +/*==================================================================== + * Fetch X.25 asynchronous events. + *===================================================================*/ + +static int x25_fetch_events (sdla_t* card) +{ + TX25Status* status = card->flags; + TX25Mbox* mbox = card->mbox; + int err = 0; + + if (status->gflags & 0x20) + { + memset(&mbox->cmd, 0, sizeof(TX25Cmd)); + mbox->cmd.command = X25_IS_DATA_AVAILABLE; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + if (err) x25_error(card, err, X25_IS_DATA_AVAILABLE, 0); + } + return err; +} + +/*==================================================================== + * X.25 asynchronous event/error handler. + * This routine is called each time interface command returns + * non-zero return code to handle X.25 asynchronous events and + * common errors. Return non-zero to repeat command or zero to + * cancel it. + * + * Notes: + * 1. This function may be called recursively, as handling some of the + * asynchronous events (e.g. call request) requires execution of the + * interface command(s) that, in turn, may also return asynchronous + * events. To avoid re-entrancy problems we copy mailbox to dynamically + * allocated memory before processing events. + *====================================================================*/ + +static int x25_error (sdla_t* card, int err, int cmd, int lcn) +{ + int retry = 1; + unsigned dlen = ((TX25Mbox*)card->mbox)->cmd.length; + TX25Mbox* mb; + + mb = kmalloc(sizeof(TX25Mbox) + dlen, GFP_ATOMIC); + if (mb == NULL) + { + printk(KERN_ERR "%s: x25_error() out of memory!\n", + card->devname); + return 0; + } + memcpy(mb, card->mbox, sizeof(TX25Mbox) + dlen); + switch (err){ + + case X25RES_ASYNC_PACKET: /* X.25 asynchronous packet was received */ + + mb->data[dlen] = '\0'; + + switch (mb->cmd.pktType & 0x7F){ + + case ASE_CALL_RQST: /* incoming call */ + retry = incoming_call(card, cmd, lcn, mb); + break; + + case ASE_CALL_ACCEPTED: /* connected */ + retry = call_accepted(card, cmd, lcn, mb); + break; + + case ASE_CLEAR_RQST: /* call clear request */ + retry = call_cleared(card, cmd, lcn, mb); + break; + + case ASE_RESET_RQST: /* reset request */ + printk(KERN_INFO "%s: X.25 reset request on LCN %d! " + "Cause:0x%02X Diagn:0x%02X\n", + card->devname, mb->cmd.lcn, mb->cmd.cause, + mb->cmd.diagn); + api_oob_event (card,mb); + break; + + case ASE_RESTART_RQST: /* restart request */ + retry = restart_event(card, cmd, lcn, mb); + break; + + case ASE_CLEAR_CONFRM: + if (clear_confirm_event (card,mb)) + break; + + /* I use the goto statement here so if + * somebody inserts code between the + * case and default, we will not have + * ghost problems */ + + goto dflt_1; + + default: +dflt_1: + printk(KERN_INFO "%s: X.25 event 0x%02X on LCN %d! " + "Cause:0x%02X Diagn:0x%02X\n", + card->devname, mb->cmd.pktType, + mb->cmd.lcn, mb->cmd.cause, mb->cmd.diagn); + } + break; + + case X25RES_PROTO_VIOLATION: /* X.25 protocol violation indication */ + + /* Bug Fix: Mar 14 2000 + * The Protocol violation error conditions were + * not handled previously */ + + switch (mb->cmd.pktType & 0x7F){ + + case PVE_CLEAR_RQST: /* Clear request */ + retry = call_cleared(card, cmd, lcn, mb); + break; + + case PVE_RESET_RQST: /* Reset request */ + printk(KERN_INFO "%s: X.25 reset request on LCN %d! " + "Cause:0x%02X Diagn:0x%02X\n", + card->devname, mb->cmd.lcn, mb->cmd.cause, + mb->cmd.diagn); + api_oob_event (card,mb); + break; + + case PVE_RESTART_RQST: /* Restart request */ + retry = restart_event(card, cmd, lcn, mb); + break; + + default : + printk(KERN_INFO + "%s: X.25 protocol violation on LCN %d! " + "Packet:0x%02X Cause:0x%02X Diagn:0x%02X\n", + card->devname, mb->cmd.lcn, + mb->cmd.pktType & 0x7F, mb->cmd.cause, mb->cmd.diagn); + api_oob_event(card,mb); + } + break; + + case 0x42: /* X.25 timeout */ + retry = timeout_event(card, cmd, lcn, mb); + break; + + case 0x43: /* X.25 retry limit exceeded */ + printk(KERN_INFO + "%s: exceeded X.25 retry limit on LCN %d! " + "Packet:0x%02X Diagn:0x%02X\n", card->devname, + mb->cmd.lcn, mb->cmd.pktType, mb->cmd.diagn) + ; + break; + + case 0x08: /* modem failure */ +#ifndef MODEM_NOT_LOG + printk(KERN_INFO "%s: modem failure!\n", card->devname); +#endif /* MODEM_NOT_LOG */ + api_oob_event(card,mb); + break; + + case 0x09: /* N2 retry limit */ + printk(KERN_INFO "%s: exceeded HDLC retry limit!\n", + card->devname); + api_oob_event(card,mb); + break; + + case 0x06: /* unnumbered frame was received while in ABM */ + printk(KERN_INFO "%s: received Unnumbered frame 0x%02X!\n", + card->devname, mb->data[0]); + api_oob_event(card,mb); + break; + + case CMD_TIMEOUT: + printk(KERN_ERR "%s: command 0x%02X timed out!\n", + card->devname, cmd) + ; + retry = 0; /* abort command */ + break; + + case X25RES_NOT_READY: + retry = 1; + break; + + case 0x01: + if (card->u.x.LAPB_hdlc) + break; + + if (mb->cmd.command == 0x16) + break; + /* I use the goto statement here so if + * somebody inserts code between the + * case and default, we will not have + * ghost problems */ + goto dflt_2; + + default: +dflt_2: + printk(KERN_INFO "%s: command 0x%02X returned 0x%02X! Lcn %i\n", + card->devname, cmd, err, mb->cmd.lcn) + ; + retry = 0; /* abort command */ + } + kfree(mb); + return retry; +} + +/*==================================================================== + * X.25 Asynchronous Event Handlers + * These functions are called by the x25_error() and should return 0, if + * the command resulting in the asynchronous event must be aborted. + *====================================================================*/ + + + +/*==================================================================== + *Handle X.25 incoming call request. + * RFC 1356 establishes the following rules: + * 1. The first octet in the Call User Data (CUD) field of the call + * request packet contains NLPID identifying protocol encapsulation + * 2. Calls MUST NOT be accepted unless router supports requested + * protocol encapsulation. + * 3. A diagnostic code 249 defined by ISO/IEC 8208 may be used + * when clearing a call because protocol encapsulation is not + * supported. + * 4. If an incoming call is received while a call request is + * pending (i.e. call collision has occurred), the incoming call + * shall be rejected and call request shall be retried. + *====================================================================*/ + +static int incoming_call (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) +{ + struct wan_device* wandev = &card->wandev; + int new_lcn = mb->cmd.lcn; + struct net_device* dev = get_dev_by_lcn(wandev, new_lcn); + x25_channel_t* chan = NULL; + int accept = 0; /* set to '1' if o.k. to accept call */ + unsigned int user_data; + x25_call_info_t* info; + + /* Make sure there is no call collision */ + if (dev != NULL) + { + printk(KERN_INFO + "%s: X.25 incoming call collision on LCN %d!\n", + card->devname, new_lcn); + + x25_clear_call(card, new_lcn, 0, 0); + return 1; + } + + /* Make sure D bit is not set in call request */ +//FIXME: THIS IS NOT TURE !!!! TAKE IT OUT +// if (mb->cmd.qdm & 0x02) +// { +// printk(KERN_INFO +// "%s: X.25 incoming call on LCN %d with D-bit set!\n", +// card->devname, new_lcn); +// +// x25_clear_call(card, new_lcn, 0, 0); +// return 1; +// } + + /* Parse call request data */ + info = kmalloc(sizeof(x25_call_info_t), GFP_ATOMIC); + if (info == NULL) + { + printk(KERN_ERR + "%s: not enough memory to parse X.25 incoming call " + "on LCN %d!\n", card->devname, new_lcn); + x25_clear_call(card, new_lcn, 0, 0); + return 1; + } + + parse_call_info(mb->data, info); + + if (card->u.x.logging) + printk(KERN_INFO "\n%s: X.25 incoming call on LCN %d!\n", + card->devname, new_lcn); + + /* Conver the first two ASCII characters into an + * interger. Used to check the incoming protocol + */ + user_data = hex_to_uint(info->user,2); + + /* Find available channel */ + for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) { + chan = dev->priv; + + if (chan->common.usedby == API) + continue; + + if (!chan->common.svc || (chan->common.state != WAN_DISCONNECTED)) + continue; + + if (user_data == NLPID_IP && chan->protocol != htons(ETH_P_IP)){ + printk(KERN_INFO "IP packet but configured for IPX : %x, %x\n", + htons(chan->protocol), info->user[0]); + continue; + } + + if (user_data == NLPID_SNAP && chan->protocol != htons(ETH_P_IPX)){ + printk(KERN_INFO "IPX packet but configured for IP: %x\n", + htons(chan->protocol)); + continue; + } + if (strcmp(info->src, chan->addr) == 0) + break; + + /* If just an '@' is specified, accept all incoming calls */ + if (strcmp(chan->addr, "") == 0) + break; + } + + if (dev == NULL){ + + /* If the call is not for any WANPIPE interfaces + * check to see if there is an API listening queue + * waiting for data. If there is send the packet + * up the stack. + */ + if (card->sk != NULL && card->func != NULL){ + if (api_incoming_call(card,mb,new_lcn)){ + x25_clear_call(card, new_lcn, 0, 0); + } + accept = 0; + }else{ + printk(KERN_INFO "%s: no channels available!\n", + card->devname); + + x25_clear_call(card, new_lcn, 0, 0); + } + + }else if (info->nuser == 0){ + + printk(KERN_INFO + "%s: no user data in incoming call on LCN %d!\n", + card->devname, new_lcn) + ; + x25_clear_call(card, new_lcn, 0, 0); + + }else switch (info->user[0]){ + + case 0: /* multiplexed */ + chan->protocol = htons(0); + accept = 1; + break; + + case NLPID_IP: /* IP datagrams */ + accept = 1; + break; + + case NLPID_SNAP: /* IPX datagrams */ + accept = 1; + break; + + default: + printk(KERN_INFO + "%s: unsupported NLPID 0x%02X in incoming call " + "on LCN %d!\n", card->devname, info->user[0], new_lcn); + x25_clear_call(card, new_lcn, 0, 249); + } + + if (accept && (x25_accept_call(card, new_lcn, 0) == CMD_OK)){ + + bind_lcn_to_dev (card, chan->dev, new_lcn); + + if (x25_get_chan_conf(card, chan) == CMD_OK) + set_chan_state(dev, WAN_CONNECTED); + else + x25_clear_call(card, new_lcn, 0, 0); + } + kfree(info); + return 1; +} + +/*==================================================================== + * Handle accepted call. + *====================================================================*/ + +static int call_accepted (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) +{ + unsigned new_lcn = mb->cmd.lcn; + struct net_device* dev = find_channel(card, new_lcn); + x25_channel_t* chan; + + if (dev == NULL){ + printk(KERN_INFO + "%s: clearing orphaned connection on LCN %d!\n", + card->devname, new_lcn); + x25_clear_call(card, new_lcn, 0, 0); + return 1; + } + + if (card->u.x.logging) + printk(KERN_INFO "%s: X.25 call accepted on Dev %s and LCN %d!\n", + card->devname, dev->name, new_lcn); + + /* Get channel configuration and notify router */ + chan = dev->priv; + if (x25_get_chan_conf(card, chan) != CMD_OK) + { + x25_clear_call(card, new_lcn, 0, 0); + return 1; + } + + set_chan_state(dev, WAN_CONNECTED); + + if (chan->common.usedby == API){ + send_delayed_cmd_result(card,dev,mb); + bind_lcn_to_dev (card, dev, new_lcn); + } + + return 1; +} + +/*==================================================================== + * Handle cleared call. + *====================================================================*/ + +static int call_cleared (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) +{ + unsigned new_lcn = mb->cmd.lcn; + struct net_device* dev = find_channel(card, new_lcn); + x25_channel_t *chan; + unsigned char old_state; + + if (card->u.x.logging){ + printk(KERN_INFO "%s: X.25 clear request on LCN %d! Cause:0x%02X " + "Diagn:0x%02X\n", + card->devname, new_lcn, mb->cmd.cause, mb->cmd.diagn); + } + + if (dev == NULL){ + printk(KERN_INFO "%s: X.25 clear request : No device for clear\n", + card->devname); + return 1; + } + + chan=dev->priv; + + old_state = chan->common.state; + + set_chan_state(dev, WAN_DISCONNECTED); + + if (chan->common.usedby == API){ + + switch (old_state){ + + case WAN_CONNECTING: + send_delayed_cmd_result(card,dev,mb); + break; + case WAN_CONNECTED: + send_oob_msg(card,dev,mb); + break; + } + } + + return ((cmd == X25_WRITE) && (lcn == new_lcn)) ? 0 : 1; +} + +/*==================================================================== + * Handle X.25 restart event. + *====================================================================*/ + +static int restart_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) +{ + struct wan_device* wandev = &card->wandev; + struct net_device* dev; + x25_channel_t *chan; + unsigned char old_state; + + printk(KERN_INFO + "%s: X.25 restart request! Cause:0x%02X Diagn:0x%02X\n", + card->devname, mb->cmd.cause, mb->cmd.diagn); + + /* down all logical channels */ + for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) { + chan=dev->priv; + old_state = chan->common.state; + + set_chan_state(dev, WAN_DISCONNECTED); + + if (chan->common.usedby == API){ + switch (old_state){ + + case WAN_CONNECTING: + send_delayed_cmd_result(card,dev,mb); + break; + case WAN_CONNECTED: + send_oob_msg(card,dev,mb); + break; + } + } + } + return (cmd == X25_WRITE) ? 0 : 1; +} + +/*==================================================================== + * Handle timeout event. + *====================================================================*/ + +static int timeout_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) +{ + unsigned new_lcn = mb->cmd.lcn; + + if (mb->cmd.pktType == 0x05) /* call request time out */ + { + struct net_device* dev = find_channel(card,new_lcn); + + printk(KERN_INFO "%s: X.25 call timed timeout on LCN %d!\n", + card->devname, new_lcn); + + if (dev){ + x25_channel_t *chan = dev->priv; + set_chan_state(dev, WAN_DISCONNECTED); + + if (chan->common.usedby == API){ + send_delayed_cmd_result(card,dev,card->mbox); + } + } + }else{ + printk(KERN_INFO "%s: X.25 packet 0x%02X timeout on LCN %d!\n", + card->devname, mb->cmd.pktType, new_lcn); + } + return 1; +} + +/* + * Miscellaneous + */ + +/*==================================================================== + * Establish physical connection. + * o open HDLC and raise DTR + * + * Return: 0 connection established + * 1 connection is in progress + * <0 error + *===================================================================*/ + +static int connect (sdla_t* card) +{ + TX25Status* status = card->flags; + + if (x25_open_hdlc(card) || x25_setup_hdlc(card)) + return -EIO; + + wanpipe_set_state(card, WAN_CONNECTING); + + x25_set_intr_mode(card, INTR_ON_TIMER); + status->imask &= ~INTR_ON_TIMER; + + return 1; +} + +/* + * Tear down physical connection. + * o close HDLC link + * o drop DTR + * + * Return: 0 + * <0 error + */ + +static int disconnect (sdla_t* card) +{ + wanpipe_set_state(card, WAN_DISCONNECTED); + x25_set_intr_mode(card, INTR_ON_TIMER); /* disable all interrupt except timer */ + x25_close_hdlc(card); /* close HDLC link */ + x25_set_dtr(card, 0); /* drop DTR */ + return 0; +} + +/* + * Find network device by its channel number. + */ + +static struct net_device* get_dev_by_lcn(struct wan_device* wandev, + unsigned lcn) +{ + struct net_device* dev; + + for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) + if (((x25_channel_t*)dev->priv)->common.lcn == lcn) + break; + return dev; +} + +/* + * Initiate connection on the logical channel. + * o for PVC we just get channel configuration + * o for SVCs place an X.25 call + * + * Return: 0 connected + * >0 connection in progress + * <0 failure + */ + +static int chan_connect(struct net_device* dev) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + + if (chan->common.svc && chan->common.usedby == WANPIPE){ + if (!chan->addr[0]){ + printk(KERN_INFO "%s: No Destination Address\n", + card->devname); + return -EINVAL; /* no destination address */ + } + printk(KERN_INFO "%s: placing X.25 call to %s ...\n", + card->devname, chan->addr); + + if (x25_place_call(card, chan) != CMD_OK) + return -EIO; + + set_chan_state(dev, WAN_CONNECTING); + return 1; + }else{ + if (x25_get_chan_conf(card, chan) != CMD_OK) + return -EIO; + + set_chan_state(dev, WAN_CONNECTED); + } + return 0; +} + +/* + * Disconnect logical channel. + * o if SVC then clear X.25 call + */ + +static int chan_disc(struct net_device* dev) +{ + x25_channel_t* chan = dev->priv; + + if (chan->common.svc){ + x25_clear_call(chan->card, chan->common.lcn, 0, 0); + + /* For API we disconnect on clear + * confirmation. + */ + if (chan->common.usedby == API) + return 0; + } + + set_chan_state(dev, WAN_DISCONNECTED); + + return 0; +} + +/* + * Set logical channel state. + */ + +static void set_chan_state(struct net_device* dev, int state) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + unsigned long flags; + + save_flags(flags); + cli(); + if (chan->common.state != state) + { + switch (state) + { + case WAN_CONNECTED: + if (card->u.x.logging){ + printk (KERN_INFO + "%s: interface %s connected, lcn %i !\n", + card->devname, dev->name,chan->common.lcn); + } + *(unsigned short*)dev->dev_addr = htons(chan->common.lcn); + chan->i_timeout_sofar = jiffies; + + /* LAPB is PVC Based */ + if (card->u.x.LAPB_hdlc) + chan->common.svc=0; + break; + + case WAN_CONNECTING: + if (card->u.x.logging){ + printk (KERN_INFO + "%s: interface %s connecting, lcn %i ...\n", + card->devname, dev->name, chan->common.lcn); + } + break; + + case WAN_DISCONNECTED: + if (card->u.x.logging){ + printk (KERN_INFO + "%s: interface %s disconnected, lcn %i !\n", + card->devname, dev->name,chan->common.lcn); + } + atomic_set(&chan->common.disconnect,0); + + if (chan->common.svc) { + *(unsigned short*)dev->dev_addr = 0; + card->u.x.svc_to_dev_map[(chan->common.lcn%X25_MAX_CHAN)]=NULL; + chan->common.lcn = 0; + } + + if (chan->transmit_length){ + chan->transmit_length=0; + atomic_set(&chan->common.driver_busy,0); + chan->tx_offset=0; + if (netif_queue_stopped(dev)){ + netif_wake_queue(dev); + } + } + atomic_set(&chan->common.command,0); + break; + + case WAN_DISCONNECTING: + if (card->u.x.logging){ + printk (KERN_INFO + "\n%s: interface %s disconnecting, lcn %i ...\n", + card->devname, dev->name,chan->common.lcn); + } + atomic_set(&chan->common.disconnect,0); + break; + } + chan->common.state = state; + } + chan->state_tick = jiffies; + restore_flags(flags); +} + +/* + * Send packet on a logical channel. + * When this function is called, tx_skb field of the channel data + * space points to the transmit socket buffer. When transmission + * is complete, release socket buffer and reset 'tbusy' flag. + * + * Return: 0 - transmission complete + * 1 - busy + * + * Notes: + * 1. If packet length is greater than MTU for this channel, we'll fragment + * the packet into 'complete sequence' using M-bit. + * 2. When transmission is complete, an event notification should be issued + * to the router. + */ + +static int chan_send(struct net_device* dev, void* buff, unsigned data_len, + unsigned char tx_intr) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + TX25Status* status = card->flags; + unsigned len=0, qdm=0, res=0, orig_len = 0; + void *data; + + /* Check to see if channel is ready */ + if ((!(status->cflags[chan->ch_idx] & 0x40) && !card->u.x.LAPB_hdlc) || + !(*card->u.x.hdlc_buf_status & 0x40)){ + + if (!tx_intr){ + setup_for_delayed_transmit (dev, buff, data_len); + return 0; + }else{ + /* By returning 0 to tx_intr the packet will be dropped */ + ++card->wandev.stats.tx_dropped; + ++chan->ifstats.tx_dropped; + printk(KERN_INFO "%s: ERROR, Tx intr could not send, dropping %s:\n", + card->devname,dev->name); + ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; + return 0; + } + } + + if (chan->common.usedby == API){ + /* Remove the API Header */ + x25api_hdr_t *api_data = (x25api_hdr_t *)buff; + + /* Set the qdm bits from the packet header + * User has the option to set the qdm bits + */ + qdm = api_data->qdm; + + orig_len = len = data_len - sizeof(x25api_hdr_t); + data = (unsigned char*)buff + sizeof(x25api_hdr_t); + }else{ + data = buff; + orig_len = len = data_len; + } + + if (tx_intr){ + /* We are in tx_intr, minus the tx_offset from + * the total length. The tx_offset part of the + * data has already been sent. Also, move the + * data pointer to proper offset location. + */ + len -= chan->tx_offset; + data = (unsigned char*)data + chan->tx_offset; + } + + /* Check if the packet length is greater than MTU + * If YES: Cut the len to MTU and set the M bit + */ + if (len > chan->tx_pkt_size && !card->u.x.LAPB_hdlc){ + len = chan->tx_pkt_size; + qdm |= M_BIT; + } + + + /* Pass only first three bits of the qdm byte to the send + * routine. In case user sets any other bit which might + * cause errors. + */ + + switch(x25_send(card, chan->common.lcn, (qdm&0x07), len, data)){ + case 0x00: /* success */ + chan->i_timeout_sofar = jiffies; + + dev->trans_start=jiffies; + + if ((qdm & M_BIT) && !card->u.x.LAPB_hdlc){ + if (!tx_intr){ + /* The M bit was set, which means that part of the + * packet has been sent. Copy the packet into a buffer + * and set the offset to len, so on next tx_inter + * the packet will be sent using the below offset. + */ + chan->tx_offset += len; + + ++chan->ifstats.tx_packets; + chan->ifstats.tx_bytes += len; + + if (chan->tx_offset < orig_len){ + setup_for_delayed_transmit (dev, buff, data_len); + } + res=0; + }else{ + /* We are already in tx_inter, thus data is already + * in the buffer. Update the offset and wait for + * next tx_intr. We add on to the offset, since data can + * be X number of times larger than max data size. + */ + ++chan->ifstats.tx_packets; + chan->ifstats.tx_bytes += len; + + ++chan->if_send_stat.if_send_bfr_passed_to_adptr; + chan->tx_offset += len; + + /* The user can set the qdm bit as well. + * If the entire packet was sent and qdm is still + * set, than it's the user who has set the M bit. In that, + * case indicate that the packet was send by returning + * 0 and wait for a new packet. Otherwise, wait for next + * tx interrupt to send the rest of the packet */ + + if (chan->tx_offset < orig_len){ + res=1; + }else{ + res=0; + } + } + }else{ + ++chan->ifstats.tx_packets; + chan->ifstats.tx_bytes += len; + ++chan->if_send_stat.if_send_bfr_passed_to_adptr; + res=0; + } + break; + + case 0x33: /* Tx busy */ + if (tx_intr){ + printk(KERN_INFO "%s: Tx_intr: Big Error dropping packet %s\n", + card->devname,dev->name); + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; + res=0; + }else{ + DBG_PRINTK(KERN_INFO + "%s: Send: Big Error should have tx: storring %s\n", + card->devname,dev->name); + setup_for_delayed_transmit (dev, buff, data_len); + res=1; + } + break; + + default: /* failure */ + ++chan->ifstats.tx_errors; + if (tx_intr){ + printk(KERN_INFO "%s: Tx_intr: Failure to send, dropping %s\n", + card->devname,dev->name); + ++chan->ifstats.tx_dropped; + ++card->wandev.stats.tx_dropped; + ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; + res=0; + }else{ + DBG_PRINTK(KERN_INFO "%s: Send: Failure to send !!!, storing %s\n", + card->devname,dev->name); + setup_for_delayed_transmit (dev, buff, data_len); + res=1; + } + break; + } + return res; +} + + +/* + * Parse X.25 call request data and fill x25_call_info_t structure. + */ + +static void parse_call_info (unsigned char* str, x25_call_info_t* info) +{ + memset(info, 0, sizeof(x25_call_info_t)); + for (; *str; ++str) + { + int i; + unsigned char ch; + + if (*str == '-') switch (str[1]) { + + /* Take minus 2 off the maximum size so that + * last byte is 0. This way we can use string + * manipulaton functions on call information. + */ + + case 'd': /* destination address */ + for (i = 0; i < (MAX_X25_ADDR_SIZE-2); ++i){ + ch = str[2+i]; + if (isspace(ch)) break; + info->dest[i] = ch; + } + break; + + case 's': /* source address */ + for (i = 0; i < (MAX_X25_ADDR_SIZE-2); ++i){ + ch = str[2+i]; + if (isspace(ch)) break; + info->src[i] = ch; + } + break; + + case 'u': /* user data */ + for (i = 0; i < (MAX_X25_DATA_SIZE-2); ++i){ + ch = str[2+i]; + if (isspace(ch)) break; + info->user[i] = ch; + } + info->nuser = i; + break; + + case 'f': /* facilities */ + for (i = 0; i < (MAX_X25_FACL_SIZE-2); ++i){ + ch = str[2+i]; + if (isspace(ch)) break; + info->facil[i] = ch; + } + info->nfacil = i; + break; + } + } +} + +/* + * Convert line speed in bps to a number used by S502 code. + */ + +static unsigned char bps_to_speed_code (unsigned long bps) +{ + unsigned char number; + + if (bps <= 1200) number = 0x01; + else if (bps <= 2400) number = 0x02; + else if (bps <= 4800) number = 0x03; + else if (bps <= 9600) number = 0x04; + else if (bps <= 19200) number = 0x05; + else if (bps <= 38400) number = 0x06; + else if (bps <= 45000) number = 0x07; + else if (bps <= 56000) number = 0x08; + else if (bps <= 64000) number = 0x09; + else if (bps <= 74000) number = 0x0A; + else if (bps <= 112000) number = 0x0B; + else if (bps <= 128000) number = 0x0C; + else number = 0x0D; + + return number; +} + +/* + * Convert decimal string to unsigned integer. + * If len != 0 then only 'len' characters of the string are converted. + */ + +static unsigned int dec_to_uint (unsigned char* str, int len) +{ + unsigned val; + + if (!len) + len = strlen(str); + + for (val = 0; len && is_digit(*str); ++str, --len) + val = (val * 10) + (*str - (unsigned)'0'); + + return val; +} + +/* + * Convert hex string to unsigned integer. + * If len != 0 then only 'len' characters of the string are conferted. + */ + +static unsigned int hex_to_uint (unsigned char* str, int len) +{ + unsigned val, ch; + + if (!len) + len = strlen(str); + + for (val = 0; len; ++str, --len) + { + ch = *str; + if (is_digit(ch)) + val = (val << 4) + (ch - (unsigned)'0'); + else if (is_hex_digit(ch)) + val = (val << 4) + ((ch & 0xDF) - (unsigned)'A' + 10); + else break; + } + return val; +} + + +static int handle_IPXWAN(unsigned char *sendpacket, char *devname, unsigned char enable_IPX, unsigned long network_number, unsigned short proto) +{ + int i; + + if( proto == ETH_P_IPX) { + /* It's an IPX packet */ + if(!enable_IPX) { + /* Return 1 so we don't pass it up the stack. */ + return 1; + } + } else { + /* It's not IPX so pass it up the stack.*/ + return 0; + } + + if( sendpacket[16] == 0x90 && + sendpacket[17] == 0x04) + { + /* It's IPXWAN */ + + if( sendpacket[2] == 0x02 && + sendpacket[34] == 0x00) + { + /* It's a timer request packet */ + printk(KERN_INFO "%s: Received IPXWAN Timer Request packet\n",devname); + + /* Go through the routing options and answer no to every + * option except Unnumbered RIP/SAP + */ + for(i = 41; sendpacket[i] == 0x00; i += 5) + { + /* 0x02 is the option for Unnumbered RIP/SAP */ + if( sendpacket[i + 4] != 0x02) + { + sendpacket[i + 1] = 0; + } + } + + /* Skip over the extended Node ID option */ + if( sendpacket[i] == 0x04 ) + { + i += 8; + } + + /* We also want to turn off all header compression opt. */ + for(; sendpacket[i] == 0x80 ;) + { + sendpacket[i + 1] = 0; + i += (sendpacket[i + 2] << 8) + (sendpacket[i + 3]) + 4; + } + + /* Set the packet type to timer response */ + sendpacket[34] = 0x01; + + printk(KERN_INFO "%s: Sending IPXWAN Timer Response\n",devname); + } + else if( sendpacket[34] == 0x02 ) + { + /* This is an information request packet */ + printk(KERN_INFO "%s: Received IPXWAN Information Request packet\n",devname); + + /* Set the packet type to information response */ + sendpacket[34] = 0x03; + + /* Set the router name */ + sendpacket[51] = 'X'; + sendpacket[52] = 'T'; + sendpacket[53] = 'P'; + sendpacket[54] = 'I'; + sendpacket[55] = 'P'; + sendpacket[56] = 'E'; + sendpacket[57] = '-'; + sendpacket[58] = CVHexToAscii(network_number >> 28); + sendpacket[59] = CVHexToAscii((network_number & 0x0F000000)>> 24); + sendpacket[60] = CVHexToAscii((network_number & 0x00F00000)>> 20); + sendpacket[61] = CVHexToAscii((network_number & 0x000F0000)>> 16); + sendpacket[62] = CVHexToAscii((network_number & 0x0000F000)>> 12); + sendpacket[63] = CVHexToAscii((network_number & 0x00000F00)>> 8); + sendpacket[64] = CVHexToAscii((network_number & 0x000000F0)>> 4); + sendpacket[65] = CVHexToAscii(network_number & 0x0000000F); + for(i = 66; i < 99; i+= 1) + { + sendpacket[i] = 0; + } + + printk(KERN_INFO "%s: Sending IPXWAN Information Response packet\n",devname); + } + else + { + printk(KERN_INFO "%s: Unknown IPXWAN packet!\n",devname); + return 0; + } + + /* Set the WNodeID to our network address */ + sendpacket[35] = (unsigned char)(network_number >> 24); + sendpacket[36] = (unsigned char)((network_number & 0x00FF0000) >> 16); + sendpacket[37] = (unsigned char)((network_number & 0x0000FF00) >> 8); + sendpacket[38] = (unsigned char)(network_number & 0x000000FF); + + return 1; + } else { + /*If we get here it's an IPX-data packet, so it'll get passed up the stack. + */ + /* switch the network numbers */ + switch_net_numbers(sendpacket, network_number, 1); + return 0; + } +} + +/* + * If incoming is 0 (outgoing)- if the net numbers is ours make it 0 + * if incoming is 1 - if the net number is 0 make it ours + */ + +static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number, unsigned char incoming) +{ + unsigned long pnetwork_number; + + pnetwork_number = (unsigned long)((sendpacket[6] << 24) + + (sendpacket[7] << 16) + (sendpacket[8] << 8) + + sendpacket[9]); + + + if (!incoming) { + /*If the destination network number is ours, make it 0 */ + if( pnetwork_number == network_number) { + sendpacket[6] = sendpacket[7] = sendpacket[8] = + sendpacket[9] = 0x00; + } + } else { + /* If the incoming network is 0, make it ours */ + if( pnetwork_number == 0) { + sendpacket[6] = (unsigned char)(network_number >> 24); + sendpacket[7] = (unsigned char)((network_number & + 0x00FF0000) >> 16); + sendpacket[8] = (unsigned char)((network_number & + 0x0000FF00) >> 8); + sendpacket[9] = (unsigned char)(network_number & + 0x000000FF); + } + } + + + pnetwork_number = (unsigned long)((sendpacket[18] << 24) + + (sendpacket[19] << 16) + (sendpacket[20] << 8) + + sendpacket[21]); + + + if( !incoming ) { + /* If the source network is ours, make it 0 */ + if( pnetwork_number == network_number) { + sendpacket[18] = sendpacket[19] = sendpacket[20] = + sendpacket[21] = 0x00; + } + } else { + /* If the source network is 0, make it ours */ + if( pnetwork_number == 0 ) { + sendpacket[18] = (unsigned char)(network_number >> 24); + sendpacket[19] = (unsigned char)((network_number & + 0x00FF0000) >> 16); + sendpacket[20] = (unsigned char)((network_number & + 0x0000FF00) >> 8); + sendpacket[21] = (unsigned char)(network_number & + 0x000000FF); + } + } +} /* switch_net_numbers */ + + + + +/********************* X25API SPECIFIC FUNCTIONS ****************/ + + +/*=============================================================== + * find_channel + * + * Manages the lcn to device map. It increases performance + * because it eliminates the need to search through the link + * list for a device which is bounded to a specific lcn. + * + *===============================================================*/ + + +struct net_device *find_channel(sdla_t *card, unsigned lcn) +{ + if (card->u.x.LAPB_hdlc){ + + return card->wandev.dev; + + }else{ + /* We don't know whether the incoming lcn + * is a PVC or an SVC channel. But we do know that + * the lcn cannot be for both the PVC and the SVC + * channel. + + * If the lcn number is greater or equal to 255, + * take the modulo 255 of that number. We only have + * 255 locations, thus higher numbers must be mapped + * to a number between 0 and 245. + + * We must separate pvc's and svc's since two don't + * have to be contiguous. Meaning pvc's can start + * from 1 to 10 and svc's can start from 256 to 266. + * But 256%255 is 1, i.e. CONFLICT. + */ + + + /* Highest LCN number must be less or equal to 4096 */ + if ((lcn <= MAX_LCN_NUM) && (lcn > 0)){ + + if (lcn < X25_MAX_CHAN){ + if (card->u.x.svc_to_dev_map[lcn]) + return card->u.x.svc_to_dev_map[lcn]; + + if (card->u.x.pvc_to_dev_map[lcn]) + return card->u.x.pvc_to_dev_map[lcn]; + + }else{ + int new_lcn = lcn%X25_MAX_CHAN; + if (card->u.x.svc_to_dev_map[new_lcn]) + return card->u.x.svc_to_dev_map[new_lcn]; + + if (card->u.x.pvc_to_dev_map[new_lcn]) + return card->u.x.pvc_to_dev_map[new_lcn]; + } + } + return NULL; + } +} + +void bind_lcn_to_dev(sdla_t *card, struct net_device *dev, unsigned lcn) +{ + x25_channel_t *chan = dev->priv; + + /* Modulo the lcn number by X25_MAX_CHAN (255) + * because the lcn number can be greater than 255 + * + * We need to split svc and pvc since they don't have + * to be contigous. + */ + + if (chan->common.svc){ + card->u.x.svc_to_dev_map[(lcn % X25_MAX_CHAN)] = dev; + }else{ + card->u.x.pvc_to_dev_map[(lcn % X25_MAX_CHAN)] = dev; + } + chan->common.lcn = lcn; +} + + + +/*=============================================================== + * x25api_bh + * + * + *==============================================================*/ + +static void x25api_bh(struct net_device* dev) +{ + x25_channel_t* chan = dev->priv; + sdla_t* card = chan->card; + struct sk_buff *skb; + + if (atomic_read(&chan->bh_buff_used) == 0){ + printk(KERN_INFO "%s: BH Buffer Empty in BH\n", + card->devname); + clear_bit(0, &chan->tq_working); + return; + } + + while (atomic_read(&chan->bh_buff_used)){ + + /* If the sock is in the process of unlinking the + * driver from the socket, we must get out. + * This never happends but is a sanity check. */ + if (test_bit(0,&chan->common.common_critical)){ + clear_bit(0, &chan->tq_working); + return; + } + + /* If LAPB HDLC, do not drop packets if socket is + * not connected. Let the buffer fill up and + * turn off rx interrupt */ + if (card->u.x.LAPB_hdlc){ + if (chan->common.sk == NULL || chan->common.func == NULL){ + clear_bit(0, &chan->tq_working); + return; + } + } + + skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb; + + if (skb == NULL){ + printk(KERN_INFO "%s: BH Skb empty for read %i\n", + card->devname,chan->bh_read); + }else{ + + if (chan->common.sk == NULL || chan->common.func == NULL){ + printk(KERN_INFO "%s: BH: Socket disconnected, dropping\n", + card->devname); + dev_kfree_skb_any(skb); + x25api_bh_cleanup(dev); + ++chan->ifstats.rx_dropped; + ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; + continue; + } + + + if (chan->common.func(skb,dev,chan->common.sk) != 0){ + /* Sock full cannot send, queue us for another + * try + */ + printk(KERN_INFO "%s: BH: !!! Packet failed to send !!!!! \n", + card->devname); + atomic_set(&chan->common.receive_block,1); + return; + }else{ + x25api_bh_cleanup(dev); + ++chan->rx_intr_stat.rx_intr_bfr_passed_to_stack; + } + } + } + clear_bit(0, &chan->tq_working); + + return; +} + +/*=============================================================== + * x25api_bh_cleanup + * + * + *==============================================================*/ + +static int x25api_bh_cleanup(struct net_device *dev) +{ + x25_channel_t* chan = dev->priv; + sdla_t *card = chan->card; + TX25Status* status = card->flags; + + + ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL; + + if (chan->bh_read == MAX_BH_BUFF){ + chan->bh_read=0; + }else{ + ++chan->bh_read; + } + + /* If the Receive interrupt was off, it means + * that we filled up our circular buffer. Check + * that we have space in the buffer. If so + * turn the RX interrupt back on. + */ + if (!(status->imask & INTR_ON_RX_FRAME)){ + if (atomic_read(&chan->bh_buff_used) < (MAX_BH_BUFF+1)){ + printk(KERN_INFO "%s: BH: Turning on the interrupt\n", + card->devname); + status->imask |= INTR_ON_RX_FRAME; + } + } + + atomic_dec(&chan->bh_buff_used); + return 0; +} + + +/*=============================================================== + * bh_enqueue + * + * + *==============================================================*/ + +static int bh_enqueue(struct net_device *dev, struct sk_buff *skb) +{ + x25_channel_t* chan = dev->priv; + sdla_t *card = chan->card; + TX25Status* status = card->flags; + + if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){ + printk(KERN_INFO "%s: Bottom half buffer FULL\n", + card->devname); + return 1; + } + + ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb; + + if (chan->bh_write == MAX_BH_BUFF){ + chan->bh_write=0; + }else{ + ++chan->bh_write; + } + + atomic_inc(&chan->bh_buff_used); + + if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){ + printk(KERN_INFO "%s: Buffer is now full, Turning off RX Intr\n", + card->devname); + status->imask &= ~INTR_ON_RX_FRAME; + } + + return 0; +} + + +/*=============================================================== + * timer_intr_cmd_exec + * + * Called by timer interrupt to execute a command + *===============================================================*/ + +static int timer_intr_cmd_exec (sdla_t* card) +{ + struct net_device *dev; + unsigned char more_to_exec=0; + volatile x25_channel_t *chan=NULL; + int i=0,bad_cmd=0,err=0; + + if (card->u.x.cmd_dev == NULL){ + card->u.x.cmd_dev = card->wandev.dev; + } + + dev = card->u.x.cmd_dev; + + for (;;){ + + chan = dev->priv; + + if (atomic_read(&chan->common.command)){ + + bad_cmd = check_bad_command(card,dev); + + if ((!chan->common.mbox || atomic_read(&chan->common.disconnect)) && + !bad_cmd){ + + /* Socket has died or exited, We must bring the + * channel down before anybody else tries to + * use it */ + err = channel_disconnect(card,dev); + }else{ + err = execute_delayed_cmd(card, dev, + (mbox_cmd_t*)chan->common.mbox, + bad_cmd); + } + + switch (err){ + + case RETURN_RESULT: + + /* Return the result to the socket without + * delay. NO_WAIT Command */ + atomic_set(&chan->common.command,0); + if (atomic_read(&card->u.x.command_busy)) + atomic_set(&card->u.x.command_busy,0); + + send_delayed_cmd_result(card,dev,card->mbox); + + more_to_exec=0; + break; + case DELAY_RESULT: + + /* Wait for the remote to respond, before + * sending the result up to the socket. + * WAIT command */ + if (atomic_read(&card->u.x.command_busy)) + atomic_set(&card->u.x.command_busy,0); + + atomic_set(&chan->common.command,0); + more_to_exec=0; + break; + default: + + /* If command could not be executed for + * some reason (i.e return code 0x33 busy) + * set the more_to_exec bit which will + * indicate that this command must be exectued + * again during next timer interrupt + */ + more_to_exec=1; + if (atomic_read(&card->u.x.command_busy) == 0) + atomic_set(&card->u.x.command_busy,1); + break; + } + + bad_cmd=0; + + /* If flags is set, there are no hdlc buffers, + * thus, wait for the next pass and try the + * same command again. Otherwise, start searching + * from next device on the next pass. + */ + if (!more_to_exec){ + dev = move_dev_to_next(card,dev); + } + break; + }else{ + /* This device has nothing to execute, + * go to next. + */ + if (atomic_read(&card->u.x.command_busy)) + atomic_set(&card->u.x.command_busy,0); + dev = move_dev_to_next(card,dev); + } + + if (++i == card->u.x.no_dev){ + if (!more_to_exec){ + DBG_PRINTK(KERN_INFO "%s: Nothing to execute in Timer\n", + card->devname); + if (atomic_read(&card->u.x.command_busy)){ + atomic_set(&card->u.x.command_busy,0); + } + } + break; + } + + } //End of FOR + + card->u.x.cmd_dev = dev; + + if (more_to_exec){ + /* If more commands are pending, do not turn off timer + * interrupt */ + return 1; + }else{ + /* No more commands, turn off timer interrupt */ + return 0; + } +} + +/*=============================================================== + * execute_delayed_cmd + * + * Execute an API command which was passed down from the + * sock. Sock is very limited in which commands it can + * execute. Wait and No Wait commands are supported. + * Place Call, Clear Call and Reset wait commands, where + * Accept Call is a no_wait command. + * + *===============================================================*/ + +static int execute_delayed_cmd(sdla_t* card, struct net_device *dev, + mbox_cmd_t *usr_cmd, char bad_cmd) +{ + TX25Mbox* mbox = card->mbox; + int err; + x25_channel_t *chan = dev->priv; + int delay=RETURN_RESULT; + + if (!(*card->u.x.hdlc_buf_status & 0x40) && !bad_cmd){ + return TRY_CMD_AGAIN; + } + + /* This way a command is guaranteed to be executed for + * a specific lcn, the network interface is bound to. */ + usr_cmd->cmd.lcn = chan->common.lcn; + + + /* If channel is pvc, instead of place call + * run x25_channel configuration. If running LAPB HDLC + * enable communications. + */ + if ((!chan->common.svc) && (usr_cmd->cmd.command == X25_PLACE_CALL)){ + + if (card->u.x.LAPB_hdlc){ + DBG_PRINTK(KERN_INFO "LAPB: Connecting\n"); + connect(card); + set_chan_state(dev,WAN_CONNECTING); + return DELAY_RESULT; + }else{ + DBG_PRINTK(KERN_INFO "%s: PVC is CONNECTING\n",card->devname); + if (x25_get_chan_conf(card, chan) == CMD_OK){ + set_chan_state(dev, WAN_CONNECTED); + }else{ + set_chan_state(dev, WAN_DISCONNECTED); + } + return RETURN_RESULT; + } + } + + /* Copy the socket mbox command onto the board */ + + memcpy(&mbox->cmd, &usr_cmd->cmd, sizeof(TX25Cmd)); + if (usr_cmd->cmd.length){ + memcpy(mbox->data, usr_cmd->data, usr_cmd->cmd.length); + } + + /* Check if command is bad. We need to copy the cmd into + * the buffer regardless since we return the, mbox to + * the user */ + if (bad_cmd){ + mbox->cmd.result=0x01; + return RETURN_RESULT; + } + + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + + if (err != CMD_OK && err != X25RES_NOT_READY) + x25_error(card, err, usr_cmd->cmd.command, usr_cmd->cmd.lcn); + + if (mbox->cmd.result == X25RES_NOT_READY){ + return TRY_CMD_AGAIN; + } + + switch (mbox->cmd.command){ + + case X25_PLACE_CALL: + + switch (mbox->cmd.result){ + + case CMD_OK: + + /* Check if Place call is a wait command or a + * no wait command */ + if (atomic_read(&chan->common.command) & 0x80) + delay=RETURN_RESULT; + else + delay=DELAY_RESULT; + + + DBG_PRINTK(KERN_INFO "\n%s: PLACE CALL Binding dev %s to lcn %i\n", + card->devname,dev->name, mbox->cmd.lcn); + + bind_lcn_to_dev (card, dev, mbox->cmd.lcn); + set_chan_state(dev, WAN_CONNECTING); + break; + + + default: + delay=RETURN_RESULT; + set_chan_state(dev, WAN_DISCONNECTED); + break; + } + break; + + case X25_ACCEPT_CALL: + + switch (mbox->cmd.result){ + + case CMD_OK: + + DBG_PRINTK(KERN_INFO "\n%s: ACCEPT Binding dev %s to lcn %i\n", + card->devname,dev->name,mbox->cmd.lcn); + + bind_lcn_to_dev (card, dev, mbox->cmd.lcn); + + if (x25_get_chan_conf(card, chan) == CMD_OK){ + + set_chan_state(dev, WAN_CONNECTED); + delay=RETURN_RESULT; + + }else{ + if (x25_clear_call(card, usr_cmd->cmd.lcn, 0, 0) == CMD_OK){ + /* if clear is successful, wait for clear confirm + */ + delay=DELAY_RESULT; + }else{ + /* Do not change the state here. If we fail + * the accept the return code is send up + *the stack, which will ether retry + * or clear the call + */ + DBG_PRINTK(KERN_INFO + "%s: ACCEPT: STATE MAY BE CURRUPTED 2 !!!!!\n", + card->devname); + delay=RETURN_RESULT; + } + } + break; + + + case X25RES_ASYNC_PACKET: + delay=TRY_CMD_AGAIN; + break; + + default: + DBG_PRINTK(KERN_INFO "%s: ACCEPT FAILED\n",card->devname); + if (x25_clear_call(card, usr_cmd->cmd.lcn, 0, 0) == CMD_OK){ + delay=DELAY_RESULT; + }else{ + /* Do not change the state here. If we fail the accept. The + * return code is send up the stack, which will ether retry + * or clear the call */ + DBG_PRINTK(KERN_INFO + "%s: ACCEPT: STATE MAY BE CORRUPTED 1 !!!!!\n", + card->devname); + delay=RETURN_RESULT; + } + } + break; + + case X25_CLEAR_CALL: + + switch (mbox->cmd.result){ + + case CMD_OK: + DBG_PRINTK(KERN_INFO + "CALL CLEAR OK: Dev %s Mbox Lcn %i Chan Lcn %i\n", + dev->name,mbox->cmd.lcn,chan->common.lcn); + set_chan_state(dev, WAN_DISCONNECTING); + delay = DELAY_RESULT; + break; + + case X25RES_CHANNEL_IN_USE: + case X25RES_ASYNC_PACKET: + delay = TRY_CMD_AGAIN; + break; + + case X25RES_LINK_NOT_IN_ABM: + case X25RES_INVAL_LCN: + case X25RES_INVAL_STATE: + set_chan_state(dev, WAN_DISCONNECTED); + delay = RETURN_RESULT; + break; + + default: + /* If command did not execute because of user + * fault, do not change the state. This will + * signal the socket that clear command failed. + * User can retry or close the socket. + * When socket gets killed, it will set the + * chan->disconnect which will signal + * driver to clear the call */ + printk(KERN_INFO "%s: Clear Command Failed, Rc %x\n", + card->devname,mbox->cmd.command); + delay = RETURN_RESULT; + } + break; + } + + return delay; +} + +/*=============================================================== + * api_incoming_call + * + * Pass an incoming call request up the listening + * sock. If the API sock is not listening reject the + * call. + * + *===============================================================*/ + +static int api_incoming_call (sdla_t* card, TX25Mbox *mbox, int lcn) +{ + struct sk_buff *skb; + int len = sizeof(TX25Cmd)+mbox->cmd.length; + + if (alloc_and_init_skb_buf(card, &skb, len)){ + printk(KERN_INFO "%s: API incoming call, no memory\n",card->devname); + return 1; + } + + memcpy(skb_put(skb,len),&mbox->cmd,len); + + skb->mac.raw = skb->data; + skb->protocol = htons(X25_PROT); + skb->pkt_type = WAN_PACKET_ASYNC; + + if (card->func(skb,card->sk) < 0){ + printk(KERN_INFO "%s: MAJOR ERROR: Failed to send up place call \n",card->devname); + dev_kfree_skb_any(skb); + return 1; + } + + return 0; +} + +/*=============================================================== + * send_delayed_cmd_result + * + * Wait commands like PLEACE CALL or CLEAR CALL must wait + * until the result arrives. This function passes + * the result to a waiting sock. + * + *===============================================================*/ +static void send_delayed_cmd_result(sdla_t *card, struct net_device *dev, + TX25Mbox* mbox) +{ + x25_channel_t *chan = dev->priv; + mbox_cmd_t *usr_cmd = (mbox_cmd_t *)chan->common.mbox; + struct sk_buff *skb; + int len=sizeof(unsigned char); + + atomic_set(&chan->common.command,0); + + /* If the sock is in the process of unlinking the + * driver from the socket, we must get out. + * This never happends but is a sanity check. */ + if (test_bit(0,&chan->common.common_critical)){ + return; + } + + if (!usr_cmd || !chan->common.sk || !chan->common.func){ + DBG_PRINTK(KERN_INFO "Delay result: Sock not bounded sk: %u, func: %u, mbox: %u\n", + (unsigned int)chan->common.sk, + (unsigned int)chan->common.func, + (unsigned int)usr_cmd); + return; + } + + memcpy(&usr_cmd->cmd, &mbox->cmd, sizeof(TX25Cmd)); + if (mbox->cmd.length > 0){ + memcpy(usr_cmd->data, mbox->data, mbox->cmd.length); + } + + if (alloc_and_init_skb_buf(card,&skb,len)){ + printk(KERN_INFO "Delay result: No sock buffers\n"); + return; + } + + memcpy(skb_put(skb,len),&mbox->cmd.command,len); + + skb->mac.raw = skb->data; + skb->pkt_type = WAN_PACKET_CMD; + + chan->common.func(skb,dev,chan->common.sk); +} + +/*=============================================================== + * clear_confirm_event + * + * Pass the clear confirmation event up the sock. The + * API will disconnect only after the clear confirmation + * has been received. + * + * Depending on the state, clear confirmation could + * be an OOB event, or a result of an API command. + *===============================================================*/ + +static int clear_confirm_event (sdla_t *card, TX25Mbox* mb) +{ + struct net_device *dev; + x25_channel_t *chan; + unsigned char old_state; + + dev = find_channel(card,mb->cmd.lcn); + if (!dev){ + DBG_PRINTK(KERN_INFO "%s: *** GOT CLEAR BUT NO DEV %i\n", + card->devname,mb->cmd.lcn); + return 0; + } + + chan=dev->priv; + DBG_PRINTK(KERN_INFO "%s: GOT CLEAR CONFIRM %s: Mbox lcn %i Chan lcn %i\n", + card->devname, dev->name, mb->cmd.lcn, chan->common.lcn); + + /* If not API fall through to default. + * If API, send the result to a waiting + * socket. + */ + + old_state = chan->common.state; + set_chan_state(dev, WAN_DISCONNECTED); + + if (chan->common.usedby == API){ + switch (old_state) { + + case WAN_DISCONNECTING: + case WAN_CONNECTING: + send_delayed_cmd_result(card,dev,mb); + break; + case WAN_CONNECTED: + send_oob_msg(card,dev,mb); + break; + } + return 1; + } + + return 0; +} + +/*=============================================================== + * send_oob_msg + * + * Construct an NEM Message and pass it up the connected + * sock. If the sock is not bounded discard the NEM. + * + *===============================================================*/ + +static void send_oob_msg(sdla_t *card, struct net_device *dev, TX25Mbox *mbox) +{ + x25_channel_t *chan = dev->priv; + mbox_cmd_t *usr_cmd = (mbox_cmd_t *)chan->common.mbox; + struct sk_buff *skb; + int len=sizeof(x25api_hdr_t)+mbox->cmd.length; + x25api_t *api_hdr; + + /* If the sock is in the process of unlinking the + * driver from the socket, we must get out. + * This never happends but is a sanity check. */ + if (test_bit(0,&chan->common.common_critical)){ + return; + } + + if (!usr_cmd || !chan->common.sk || !chan->common.func){ + DBG_PRINTK(KERN_INFO "OOB MSG: Sock not bounded\n"); + return; + } + + memcpy(&usr_cmd->cmd, &mbox->cmd, sizeof(TX25Cmd)); + if (mbox->cmd.length > 0){ + memcpy(usr_cmd->data, mbox->data, mbox->cmd.length); + } + + if (alloc_and_init_skb_buf(card,&skb,len)){ + printk(KERN_INFO "%s: OOB MSG: No sock buffers\n",card->devname); + return; + } + + api_hdr = (x25api_t*)skb_put(skb,len); + api_hdr->hdr.pktType = mbox->cmd.pktType & 0x7F; + api_hdr->hdr.qdm = mbox->cmd.qdm; + api_hdr->hdr.cause = mbox->cmd.cause; + api_hdr->hdr.diagn = mbox->cmd.diagn; + api_hdr->hdr.length = mbox->cmd.length; + api_hdr->hdr.result = mbox->cmd.result; + api_hdr->hdr.lcn = mbox->cmd.lcn; + + if (mbox->cmd.length > 0){ + memcpy(api_hdr->data,mbox->data,mbox->cmd.length); + } + + skb->mac.raw = skb->data; + skb->pkt_type = WAN_PACKET_ERR; + + if (chan->common.func(skb,dev,chan->common.sk) < 0){ + if (bh_enqueue(dev,skb)){ + printk(KERN_INFO "%s: Dropping OOB MSG\n",card->devname); + dev_kfree_skb_any(skb); + } + } + + DBG_PRINTK(KERN_INFO "%s: OOB MSG OK, %s, lcn %i\n", + card->devname, dev->name, mbox->cmd.lcn); +} + +/*=============================================================== + * alloc_and_init_skb_buf + * + * Allocate and initialize an skb buffer. + * + *===============================================================*/ + +static int alloc_and_init_skb_buf (sdla_t *card, struct sk_buff **skb, int len) +{ + struct sk_buff *new_skb = *skb; + + new_skb = dev_alloc_skb(len + X25_HRDHDR_SZ); + if (new_skb == NULL){ + printk(KERN_INFO "%s: no socket buffers available!\n", + card->devname); + return 1; + } + + if (skb_tailroom(new_skb) < len){ + /* No room for the packet. Call off the whole thing! */ + dev_kfree_skb_any(new_skb); + printk(KERN_INFO "%s: Listen: unexpectedly long packet sequence\n" + ,card->devname); + *skb = NULL; + return 1; + } + + *skb = new_skb; + return 0; + +} + +/*=============================================================== + * api_oob_event + * + * Send an OOB event up to the sock + * + *===============================================================*/ + +static void api_oob_event (sdla_t *card,TX25Mbox *mbox) +{ + struct net_device *dev = find_channel(card, mbox->cmd.lcn); + x25_channel_t *chan; + + if (!dev) + return; + + chan=dev->priv; + + if (chan->common.usedby == API) + send_oob_msg(card,dev,mbox); + +} + + + + +static int channel_disconnect(sdla_t* card, struct net_device *dev) +{ + + int err; + x25_channel_t *chan = dev->priv; + + DBG_PRINTK(KERN_INFO "%s: TIMER: %s, Device down disconnecting\n", + card->devname,dev->name); + + if (chan->common.svc){ + err = x25_clear_call(card,chan->common.lcn,0,0); + }else{ + /* If channel is PVC or LAPB HDLC, there is no call + * to be cleared, thus drop down to the default + * area + */ + err = 1; + } + + switch (err){ + + case X25RES_CHANNEL_IN_USE: + case X25RES_NOT_READY: + err = TRY_CMD_AGAIN; + break; + case CMD_OK: + DBG_PRINTK(KERN_INFO "CALL CLEAR OK: Dev %s Chan Lcn %i\n", + dev->name,chan->common.lcn); + + set_chan_state(dev,WAN_DISCONNECTING); + atomic_set(&chan->common.command,0); + err = DELAY_RESULT; + break; + default: + /* If LAPB HDLC protocol, bring the whole link down + * once the application terminates + */ + + set_chan_state(dev,WAN_DISCONNECTED); + + if (card->u.x.LAPB_hdlc){ + DBG_PRINTK(KERN_INFO "LAPB: Disconnecting Link\n"); + hdlc_link_down (card); + } + atomic_set(&chan->common.command,0); + err = RETURN_RESULT; + break; + } + + return err; +} + +static void hdlc_link_down (sdla_t *card) +{ + TX25Mbox* mbox = card->mbox; + int retry = 5; + int err=0; + + do { + memset(mbox,0,sizeof(TX25Mbox)); + mbox->cmd.command = X25_HDLC_LINK_DISC; + mbox->cmd.length = 1; + mbox->data[0]=0; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + + } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_DISC, 0)); + + if (err) + printk(KERN_INFO "%s: Hdlc Link Down Failed %x\n",card->devname,err); + + disconnect (card); + +} + +static int check_bad_command(sdla_t* card, struct net_device *dev) +{ + x25_channel_t *chan = dev->priv; + int bad_cmd = 0; + + switch (atomic_read(&chan->common.command)&0x7F){ + + case X25_PLACE_CALL: + if (chan->common.state != WAN_DISCONNECTED) + bad_cmd=1; + break; + case X25_CLEAR_CALL: + if (chan->common.state == WAN_DISCONNECTED) + bad_cmd=1; + break; + case X25_ACCEPT_CALL: + if (chan->common.state != WAN_CONNECTING) + bad_cmd=1; + break; + case X25_RESET: + if (chan->common.state != WAN_CONNECTED) + bad_cmd=1; + break; + default: + bad_cmd=1; + break; + } + + if (bad_cmd){ + printk(KERN_INFO "%s: Invalid State, BAD Command %x, dev %s, lcn %i, st %i\n", + card->devname,atomic_read(&chan->common.command),dev->name, + chan->common.lcn, chan->common.state); + } + + return bad_cmd; +} + + + +/*************************** XPIPEMON FUNCTIONS **************************/ + +/*============================================================================== + * Process UDP call of type XPIPE + */ + +static int process_udp_mgmt_pkt(sdla_t *card) +{ + int c_retry = MAX_CMD_RETRY; + unsigned int len; + struct sk_buff *new_skb; + TX25Mbox *mbox = card->mbox; + int err; + int udp_mgmt_req_valid = 1; + struct net_device *dev; + x25_channel_t *chan; + unsigned short lcn; + struct timeval tv; + + + x25_udp_pkt_t *x25_udp_pkt; + x25_udp_pkt = (x25_udp_pkt_t *)card->u.x.udp_pkt_data; + + dev = card->u.x.udp_dev; + chan = dev->priv; + lcn = chan->common.lcn; + + switch(x25_udp_pkt->cblock.command) { + + /* XPIPE_ENABLE_TRACE */ + case XPIPE_ENABLE_TRACING: + + /* XPIPE_GET_TRACE_INFO */ + case XPIPE_GET_TRACE_INFO: + + /* SET FT1 MODE */ + case XPIPE_SET_FT1_MODE: + + if(card->u.x.udp_pkt_src == UDP_PKT_FRM_NETWORK) { + ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_direction_err; + udp_mgmt_req_valid = 0; + break; + } + + /* XPIPE_FT1_READ_STATUS */ + case XPIPE_FT1_READ_STATUS: + + /* FT1 MONITOR STATUS */ + case XPIPE_FT1_STATUS_CTRL: + if(card->hw.fwid != SFID_X25_508) { + ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_type_err; + udp_mgmt_req_valid = 0; + break; + } + default: + break; + } + + if(!udp_mgmt_req_valid) { + /* set length to 0 */ + x25_udp_pkt->cblock.length = 0; + /* set return code */ + x25_udp_pkt->cblock.result = (card->hw.fwid != SFID_X25_508) ? 0x1F : 0xCD; + + } else { + + switch (x25_udp_pkt->cblock.command) { + + + case XPIPE_FLUSH_DRIVER_STATS: + init_x25_channel_struct(chan); + init_global_statistics(card); + mbox->cmd.length = 0; + break; + + + case XPIPE_DRIVER_STAT_IFSEND: + memcpy(x25_udp_pkt->data, &chan->if_send_stat, sizeof(if_send_stat_t)); + mbox->cmd.length = sizeof(if_send_stat_t); + x25_udp_pkt->cblock.length = mbox->cmd.length; + break; + + case XPIPE_DRIVER_STAT_INTR: + memcpy(&x25_udp_pkt->data[0], &card->statistics, sizeof(global_stats_t)); + memcpy(&x25_udp_pkt->data[sizeof(global_stats_t)], + &chan->rx_intr_stat, sizeof(rx_intr_stat_t)); + + mbox->cmd.length = sizeof(global_stats_t) + + sizeof(rx_intr_stat_t); + x25_udp_pkt->cblock.length = mbox->cmd.length; + break; + + case XPIPE_DRIVER_STAT_GEN: + memcpy(x25_udp_pkt->data, + &chan->pipe_mgmt_stat.UDP_PIPE_mgmt_kmalloc_err, + sizeof(pipe_mgmt_stat_t)); + + memcpy(&x25_udp_pkt->data[sizeof(pipe_mgmt_stat_t)], + &card->statistics, sizeof(global_stats_t)); + + x25_udp_pkt->cblock.result = 0; + x25_udp_pkt->cblock.length = sizeof(global_stats_t)+ + sizeof(rx_intr_stat_t); + mbox->cmd.length = x25_udp_pkt->cblock.length; + break; + + case XPIPE_ROUTER_UP_TIME: + do_gettimeofday(&tv); + chan->router_up_time = tv.tv_sec - chan->router_start_time; + *(unsigned long *)&x25_udp_pkt->data = chan->router_up_time; + x25_udp_pkt->cblock.length = mbox->cmd.length = 4; + x25_udp_pkt->cblock.result = 0; + break; + + default : + + do { + memcpy(&mbox->cmd, &x25_udp_pkt->cblock.command, sizeof(TX25Cmd)); + if(mbox->cmd.length){ + memcpy(&mbox->data, + (char *)x25_udp_pkt->data, + mbox->cmd.length); + } + + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + } while (err && c_retry-- && x25_error(card, err, mbox->cmd.command, 0)); + + + if ( err == CMD_OK || + (err == 1 && + (mbox->cmd.command == 0x06 || + mbox->cmd.command == 0x16) ) ){ + + ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_OK; + } else { + ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_timeout; + } + + /* copy the result back to our buffer */ + memcpy(&x25_udp_pkt->cblock.command, &mbox->cmd, sizeof(TX25Cmd)); + + if(mbox->cmd.length) { + memcpy(&x25_udp_pkt->data, &mbox->data, mbox->cmd.length); + } + break; + + } //switch + + } + + /* Fill UDP TTL */ + + x25_udp_pkt->ip_pkt.ttl = card->wandev.ttl; + len = reply_udp(card->u.x.udp_pkt_data, mbox->cmd.length); + + + if(card->u.x.udp_pkt_src == UDP_PKT_FRM_NETWORK) { + + err = x25_send(card, lcn, 0, len, card->u.x.udp_pkt_data); + if (!err) + ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_send_passed; + else + ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_send_failed; + + } else { + + /* Allocate socket buffer */ + if((new_skb = dev_alloc_skb(len)) != NULL) { + void *buf; + + /* copy data into new_skb */ + buf = skb_put(new_skb, len); + memcpy(buf, card->u.x.udp_pkt_data, len); + + /* Decapsulate packet and pass it up the protocol + stack */ + new_skb->dev = dev; + + if (chan->common.usedby == API) + new_skb->protocol = htons(X25_PROT); + else + new_skb->protocol = htons(ETH_P_IP); + + new_skb->mac.raw = new_skb->data; + + netif_rx(new_skb); + ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_passed_to_stack; + + } else { + ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_no_socket; + printk(KERN_INFO + "%s: UDP mgmt cmnd, no socket buffers available!\n", + card->devname); + } + } + + card->u.x.udp_pkt_lgth = 0; + + return 1; +} + + +/*============================================================================== + * Determine what type of UDP call it is. DRVSTATS or XPIPE8ND ? + */ +static int udp_pkt_type( struct sk_buff *skb, sdla_t* card ) +{ + x25_udp_pkt_t *x25_udp_pkt = (x25_udp_pkt_t *)skb->data; + + if((x25_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) && + (x25_udp_pkt->ip_pkt.ver_inet_hdr_length == 0x45) && + (x25_udp_pkt->udp_pkt.udp_dst_port == ntohs(card->wandev.udp_port)) && + (x25_udp_pkt->wp_mgmt.request_reply == UDPMGMT_REQUEST)) { + + if(!strncmp(x25_udp_pkt->wp_mgmt.signature, + UDPMGMT_XPIPE_SIGNATURE, 8)){ + return UDP_XPIPE_TYPE; + }else{ + printk(KERN_INFO "%s: UDP Packet, Failed Signature !\n", + card->devname); + } + } + + return UDP_INVALID_TYPE; +} + + +/*============================================================================ + * Reply to UDP Management system. + * Return nothing. + */ +static int reply_udp( unsigned char *data, unsigned int mbox_len ) +{ + unsigned short len, udp_length, temp, ip_length; + unsigned long ip_temp; + int even_bound = 0; + + + x25_udp_pkt_t *x25_udp_pkt = (x25_udp_pkt_t *)data; + + /* Set length of packet */ + len = sizeof(ip_pkt_t)+ + sizeof(udp_pkt_t)+ + sizeof(wp_mgmt_t)+ + sizeof(cblock_t)+ + mbox_len; + + + /* fill in UDP reply */ + x25_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY; + + /* fill in UDP length */ + udp_length = sizeof(udp_pkt_t)+ + sizeof(wp_mgmt_t)+ + sizeof(cblock_t)+ + mbox_len; + + + /* put it on an even boundary */ + if ( udp_length & 0x0001 ) { + udp_length += 1; + len += 1; + even_bound = 1; + } + + temp = (udp_length<<8)|(udp_length>>8); + x25_udp_pkt->udp_pkt.udp_length = temp; + + /* swap UDP ports */ + temp = x25_udp_pkt->udp_pkt.udp_src_port; + x25_udp_pkt->udp_pkt.udp_src_port = + x25_udp_pkt->udp_pkt.udp_dst_port; + x25_udp_pkt->udp_pkt.udp_dst_port = temp; + + + + /* add UDP pseudo header */ + temp = 0x1100; + *((unsigned short *) + (x25_udp_pkt->data+mbox_len+even_bound)) = temp; + temp = (udp_length<<8)|(udp_length>>8); + *((unsigned short *) + (x25_udp_pkt->data+mbox_len+even_bound+2)) = temp; + + /* calculate UDP checksum */ + x25_udp_pkt->udp_pkt.udp_checksum = 0; + + x25_udp_pkt->udp_pkt.udp_checksum = + calc_checksum(&data[UDP_OFFSET], udp_length+UDP_OFFSET); + + /* fill in IP length */ + ip_length = len; + temp = (ip_length<<8)|(ip_length>>8); + x25_udp_pkt->ip_pkt.total_length = temp; + + /* swap IP addresses */ + ip_temp = x25_udp_pkt->ip_pkt.ip_src_address; + x25_udp_pkt->ip_pkt.ip_src_address = + x25_udp_pkt->ip_pkt.ip_dst_address; + x25_udp_pkt->ip_pkt.ip_dst_address = ip_temp; + + + /* fill in IP checksum */ + x25_udp_pkt->ip_pkt.hdr_checksum = 0; + x25_udp_pkt->ip_pkt.hdr_checksum = calc_checksum(data, sizeof(ip_pkt_t)); + + return len; +} /* reply_udp */ + +unsigned short calc_checksum (char *data, int len) +{ + unsigned short temp; + unsigned long sum=0; + int i; + + for( i = 0; i <len; i+=2 ) { + memcpy(&temp,&data[i],2); + sum += (unsigned long)temp; + } + + while (sum >> 16 ) { + sum = (sum & 0xffffUL) + (sum >> 16); + } + + temp = (unsigned short)sum; + temp = ~temp; + + if( temp == 0 ) + temp = 0xffff; + + return temp; +} + +/*============================================================================= + * Store a UDP management packet for later processing. + */ + +static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card, + struct net_device *dev, struct sk_buff *skb, + int lcn) +{ + int udp_pkt_stored = 0; + + if(!card->u.x.udp_pkt_lgth && (skb->len <= MAX_LGTH_UDP_MGNT_PKT)){ + card->u.x.udp_pkt_lgth = skb->len; + card->u.x.udp_type = udp_type; + card->u.x.udp_pkt_src = udp_pkt_src; + card->u.x.udp_lcn = lcn; + card->u.x.udp_dev = dev; + memcpy(card->u.x.udp_pkt_data, skb->data, skb->len); + card->u.x.timer_int_enabled |= TMR_INT_ENABLED_UDP_PKT; + udp_pkt_stored = 1; + + }else{ + printk(KERN_INFO "%s: ERROR: UDP packet not stored for LCN %d\n", + card->devname,lcn); + } + + if(udp_pkt_src == UDP_PKT_FRM_STACK){ + dev_kfree_skb_any(skb); + }else{ + dev_kfree_skb_any(skb); + } + + return(udp_pkt_stored); +} + + + +/*============================================================================= + * Initial the ppp_private_area structure. + */ +static void init_x25_channel_struct( x25_channel_t *chan ) +{ + memset(&chan->if_send_stat.if_send_entry,0,sizeof(if_send_stat_t)); + memset(&chan->rx_intr_stat.rx_intr_no_socket,0,sizeof(rx_intr_stat_t)); + memset(&chan->pipe_mgmt_stat.UDP_PIPE_mgmt_kmalloc_err,0,sizeof(pipe_mgmt_stat_t)); +} + +/*============================================================================ + * Initialize Global Statistics + */ +static void init_global_statistics( sdla_t *card ) +{ + memset(&card->statistics.isr_entry,0,sizeof(global_stats_t)); +} + + +/*=============================================================== + * SMP Support + * ==============================================================*/ + +static void S508_S514_lock(sdla_t *card, unsigned long *smp_flags) +{ + spin_lock_irqsave(&card->wandev.lock, *smp_flags); +} +static void S508_S514_unlock(sdla_t *card, unsigned long *smp_flags) +{ + spin_unlock_irqrestore(&card->wandev.lock, *smp_flags); +} + +/*=============================================================== + * x25_timer_routine + * + * A more efficient polling routine. Each half a second + * queue a polling task. We want to do the polling in a + * task not timer, because timer runs in interrupt time. + * + * FIXME Polling should be rethinked. + *==============================================================*/ + +static void x25_timer_routine(unsigned long data) +{ + sdla_t *card = (sdla_t*)data; + + if (!card->wandev.dev){ + printk(KERN_INFO "%s: Stopping the X25 Poll Timer: No Dev.\n", + card->devname); + return; + } + + if (card->open_cnt != card->u.x.num_of_ch){ + printk(KERN_INFO "%s: Stopping the X25 Poll Timer: Interface down.\n", + card->devname); + return; + } + + if (test_bit(PERI_CRIT,&card->wandev.critical)){ + printk(KERN_INFO "%s: Stopping the X25 Poll Timer: Shutting down.\n", + card->devname); + return; + } + + if (!test_and_set_bit(POLL_CRIT,&card->wandev.critical)){ + trigger_x25_poll(card); + } + + card->u.x.x25_timer.expires=jiffies+(HZ>>1); + add_timer(&card->u.x.x25_timer); + return; +} + +void disable_comm_shutdown(sdla_t *card) +{ + TX25Mbox* mbox = card->mbox; + int err; + + /* Turn of interrutps */ + mbox->data[0] = 0; + if (card->hw.fwid == SFID_X25_508){ + mbox->data[1] = card->hw.irq; + mbox->data[2] = 2; + mbox->cmd.length = 3; + }else { + mbox->cmd.length = 1; + } + mbox->cmd.command = X25_SET_INTERRUPT_MODE; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + if (err) + printk(KERN_INFO "INTERRUPT OFF FAIED %x\n",err); + + /* Bring down HDLC */ + mbox->cmd.command = X25_HDLC_LINK_CLOSE; + mbox->cmd.length = 0; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + if (err) + printk(KERN_INFO "LINK CLOSED FAILED %x\n",err); + + + /* Brind down DTR */ + mbox->data[0] = 0; + mbox->data[2] = 0; + mbox->data[1] = 0x01; + mbox->cmd.length = 3; + mbox->cmd.command = X25_SET_GLOBAL_VARS; + err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; + if (err) + printk(KERN_INFO "DTR DOWN FAILED %x\n",err); + +} + +MODULE_LICENSE("GPL"); + +/****** End *****************************************************************/ |