summaryrefslogtreecommitdiffstats
path: root/drivers/net/wan
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wan')
-rw-r--r--drivers/net/wan/cosa.c2
-rw-r--r--drivers/net/wan/dlci.c4
-rw-r--r--drivers/net/wan/dscc4.c8
-rw-r--r--drivers/net/wan/hdlc_fr.c9
-rw-r--r--drivers/net/wan/hostess_sv11.c2
-rw-r--r--drivers/net/wan/ixp4xx_hss.c4
-rw-r--r--drivers/net/wan/lapbether.c4
-rw-r--r--drivers/net/wan/lmc/lmc_main.c2
-rw-r--r--drivers/net/wan/lmc/lmc_var.h6
-rw-r--r--drivers/net/wan/pc300_drv.c2
-rw-r--r--drivers/net/wan/x25_asy.c7
-rw-r--r--drivers/net/wan/z85230.c8
12 files changed, 23 insertions, 35 deletions
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 10bafd59f9c..6fb6f8e667d 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -329,7 +329,7 @@ static int startmicrocode(struct cosa_data *cosa, int address);
static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len);
static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);
-/* Auxilliary functions */
+/* Auxiliary functions */
static int get_wait_data(struct cosa_data *cosa);
static int put_wait_data(struct cosa_data *cosa, int data);
static int puthexnumber(struct cosa_data *cosa, int number);
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 1481a446fef..21b104db5a9 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -341,10 +341,6 @@ static int dlci_add(struct dlci_add *dlci)
}
}
- err = dev_alloc_name(master, master->name);
- if (err < 0)
- goto err2;
-
*(short *)(master->dev_addr) = dlci->dlci;
dlp = netdev_priv(master);
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 4578e5b4b41..acb9ea83062 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -56,7 +56,7 @@
* IV. Notes
* The current error (XDU, RFO) recovery code is untested.
* So far, RDO takes his RX channel down and the right sequence to enable it
- * again is still a mistery. If RDO happens, plan a reboot. More details
+ * again is still a mystery. If RDO happens, plan a reboot. More details
* in the code (NB: as this happens, TX still works).
* Don't mess the cables during operation, especially on DTE ports. I don't
* suggest it for DCE either but at least one can get some messages instead
@@ -1065,7 +1065,7 @@ static int dscc4_open(struct net_device *dev)
/*
* Due to various bugs, there is no way to reliably reset a
- * specific port (manufacturer's dependant special PCI #RST wiring
+ * specific port (manufacturer's dependent special PCI #RST wiring
* apart: it affects all ports). Thus the device goes in the best
* silent mode possible at dscc4_close() time and simply claims to
* be up if it's opened again. It still isn't possible to change
@@ -1230,9 +1230,9 @@ static inline int dscc4_check_clock_ability(int port)
* scaling. Of course some rounding may take place.
* - no high speed mode (40Mb/s). May be trivial to do but I don't have an
* appropriate external clocking device for testing.
- * - no time-slot/clock mode 5: shameless lazyness.
+ * - no time-slot/clock mode 5: shameless laziness.
*
- * The clock signals wiring can be (is ?) manufacturer dependant. Good luck.
+ * The clock signals wiring can be (is ?) manufacturer dependent. Good luck.
*
* BIG FAT WARNING: if the device isn't provided enough clocking signal, it
* won't pass the init sequence. For example, straight back-to-back DTE without
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 0edb535bb2b..fc433f28c04 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1070,7 +1070,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
hdlc_device *hdlc = dev_to_hdlc(frad);
pvc_device *pvc;
struct net_device *dev;
- int result, used;
+ int used;
if ((pvc = add_pvc(frad, dlci)) == NULL) {
printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n",
@@ -1106,13 +1106,6 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
dev->tx_queue_len = 0;
dev->ml_priv = pvc;
- result = dev_alloc_name(dev, dev->name);
- if (result < 0) {
- free_netdev(dev);
- delete_unused_pvcs(hdlc);
- return result;
- }
-
if (register_netdevice(dev) != 0) {
free_netdev(dev);
delete_unused_pvcs(hdlc);
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 48edc5f4dac..e817583e6ec 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -15,7 +15,7 @@
* The hardware does the bus handling to avoid the need for delays between
* touching control registers.
*
- * Port B isnt wired (why - beats me)
+ * Port B isn't wired (why - beats me)
*
* Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
*/
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 6c571e19883..f1e1643dc3e 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -178,7 +178,7 @@
*
* The resulting average clock frequency (assuming 33.333 MHz oscillator) is:
* freq = 66.666 MHz / (A + (B + 1) / (C + 1))
- * minumum freq = 66.666 MHz / (A + 1)
+ * minimum freq = 66.666 MHz / (A + 1)
* maximum freq = 66.666 MHz / A
*
* Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7
@@ -230,7 +230,7 @@
#define PKT_PIPE_MODE_WRITE 0x57
/* HDLC packet status values - desc->status */
-#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
+#define ERR_SHUTDOWN 1 /* stop or shutdown occurrence */
#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 7f5bb913c8b..eec463f99c0 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -338,10 +338,6 @@ static int lapbeth_new_device(struct net_device *dev)
dev_hold(dev);
lapbeth->ethdev = dev;
- rc = dev_alloc_name(ndev, ndev->name);
- if (rc < 0)
- goto fail;
-
rc = -EIO;
if (register_netdevice(ndev))
goto fail;
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 70feb84df67..b7f2358d23b 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -24,7 +24,7 @@
*
* Linux driver notes:
* Linux uses the device struct lmc_private to pass private information
- * arround.
+ * around.
*
* The initialization portion of this driver (the lmc_reset() and the
* lmc_dec_reset() functions, as well as the led controls and the
diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h
index 65d01978e78..01ad45218d1 100644
--- a/drivers/net/wan/lmc/lmc_var.h
+++ b/drivers/net/wan/lmc/lmc_var.h
@@ -180,7 +180,7 @@ struct lmc___ctl {
/*
- * Carefull, look at the data sheet, there's more to this
+ * Careful, look at the data sheet, there's more to this
* structure than meets the eye. It should probably be:
*
* struct tulip_desc_t {
@@ -380,7 +380,7 @@ struct lmc___softc {
/* CSR6 settings */
#define OPERATION_MODE 0x00000200 /* Full Duplex */
#define PROMISC_MODE 0x00000040 /* Promiscuous Mode */
-#define RECIEVE_ALL 0x40000000 /* Recieve All */
+#define RECIEVE_ALL 0x40000000 /* Receive All */
#define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames */
/* Dec control registers CSR6 as well */
@@ -398,7 +398,7 @@ struct lmc___softc {
#define TULIP_CMD_RECEIVEALL 0x40000000L /* (RW) Receivel all frames? */
#define TULIP_CMD_MUSTBEONE 0x02000000L /* (RW) Must Be One (21140) */
#define TULIP_CMD_TXTHRSHLDCTL 0x00400000L /* (RW) Transmit Threshold Mode (21140) */
-#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Foward (21140) */
+#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Forward (21140) */
#define TULIP_CMD_NOHEARTBEAT 0x00080000L /* (RW) No Heartbeat (21140) */
#define TULIP_CMD_PORTSELECT 0x00040000L /* (RW) Post Select (100Mb) (21140) */
#define TULIP_CMD_FULLDUPLEX 0x00000200L /* (RW) Full Duplex Mode */
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 80ae5037cef..9617d3d0ee3 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -1445,7 +1445,7 @@ static void falc_update_stats(pc300_t * card, int ch)
* Description: In the remote loopback mode the clock and data recovered
* from the line inputs RL1/2 or RDIP/RDIN are routed back
* to the line outputs XL1/2 or XDOP/XDON via the analog
- * transmitter. As in normal mode they are processsed by
+ * transmitter. As in normal mode they are processed by
* the synchronizer and then sent to the system interface.
*----------------------------------------------------------------------------
*/
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 24297b274cd..40398bf7d03 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -517,17 +517,18 @@ static int x25_asy_close(struct net_device *dev)
* and sent on to some IP layer for further processing.
*/
-static void x25_asy_receive_buf(struct tty_struct *tty,
+static unsigned int x25_asy_receive_buf(struct tty_struct *tty,
const unsigned char *cp, char *fp, int count)
{
struct x25_asy *sl = tty->disc_data;
+ int bytes = count;
if (!sl || sl->magic != X25_ASY_MAGIC || !netif_running(sl->dev))
return;
/* Read the characters out of the buffer */
- while (count--) {
+ while (bytes--) {
if (fp && *fp++) {
if (!test_and_set_bit(SLF_ERROR, &sl->flags))
sl->dev->stats.rx_errors++;
@@ -536,6 +537,8 @@ static void x25_asy_receive_buf(struct tty_struct *tty,
}
x25_asy_unesc(sl, *cp++);
}
+
+ return count;
}
/*
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 93956861ea2..0806232e0f8 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -542,7 +542,7 @@ static void z8530_dma_tx(struct z8530_channel *chan)
z8530_tx(chan);
return;
}
- /* This shouldnt occur in DMA mode */
+ /* This shouldn't occur in DMA mode */
printk(KERN_ERR "DMA tx - bogus event!\n");
z8530_tx(chan);
}
@@ -1219,7 +1219,7 @@ static const char *z8530_type_name[]={
* @io: the port value in question
*
* Describe a Z8530 in a standard format. We must pass the I/O as
- * the port offset isnt predictable. The main reason for this function
+ * the port offset isn't predictable. The main reason for this function
* is to try and get a common format of report.
*/
@@ -1588,7 +1588,7 @@ static void z8530_rx_done(struct z8530_channel *c)
unsigned long flags;
/*
- * Complete this DMA. Neccessary to find the length
+ * Complete this DMA. Necessary to find the length
*/
flags=claim_dma_lock();
@@ -1657,7 +1657,7 @@ static void z8530_rx_done(struct z8530_channel *c)
* fifo length for this. Thus we want to flip to the new
* buffer and then mess around copying and allocating
* things. For the current case it doesn't matter but
- * if you build a system where the sync irq isnt blocked
+ * if you build a system where the sync irq isn't blocked
* by the kernel IRQ disable then you need only block the
* sync IRQ for the RT_LOCK area.
*
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 08:14:14 +0000