diff options
Diffstat (limited to 'drivers/net/wireless/airo_cs.c')
-rw-r--r-- | drivers/net/wireless/airo_cs.c | 55 |
1 files changed, 19 insertions, 36 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index d0593ed9170..f6036fb4231 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -43,21 +43,6 @@ #include "airo.h" -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0); -static char *version = "$Revision: 1.2 $"; -#define DEBUG(n, args...) if (pc_debug > (n)) printk(KERN_DEBUG args); -#else -#define DEBUG(n, args...) -#endif /*====================================================================*/ @@ -145,11 +130,10 @@ static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; - DEBUG(0, "airo_attach()\n"); + dev_dbg(&p_dev->dev, "airo_attach()\n"); /* Interrupt setup */ p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; p_dev->irq.Handler = NULL; /* @@ -184,7 +168,7 @@ static int airo_probe(struct pcmcia_device *p_dev) static void airo_detach(struct pcmcia_device *link) { - DEBUG(0, "airo_detach(0x%p)\n", link); + dev_dbg(&link->dev, "airo_detach\n"); airo_release(link); @@ -204,9 +188,6 @@ static void airo_detach(struct pcmcia_device *link) ======================================================================*/ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int airo_cs_config_check(struct pcmcia_device *p_dev, cistpl_cftable_entry_t *cfg, cistpl_cftable_entry_t *dflt, @@ -275,11 +256,11 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, req->Base = mem->win[0].host_addr; req->Size = mem->win[0].len; req->AccessSpeed = 0; - if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0) + if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0) return -ENODEV; map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev->win, &map) != 0) + if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0) return -ENODEV; } /* If we got this far, we're cool! */ @@ -291,11 +272,11 @@ static int airo_config(struct pcmcia_device *link) { local_info_t *dev; win_req_t *req; - int last_fn, last_ret; + int ret; dev = link->priv; - DEBUG(0, "airo_config(0x%p)\n", link); + dev_dbg(&link->dev, "airo_config\n"); req = kzalloc(sizeof(win_req_t), GFP_KERNEL); if (!req) @@ -315,8 +296,8 @@ static int airo_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - last_ret = pcmcia_loop_config(link, airo_cs_config_check, req); - if (last_ret) + ret = pcmcia_loop_config(link, airo_cs_config_check, req); + if (ret) goto failed; /* @@ -324,21 +305,25 @@ static int airo_config(struct pcmcia_device *link) handler to the interrupt, unless the 'Handler' member of the irq structure is initialized. */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + if (link->conf.Attributes & CONF_ENABLE_IRQ) { + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + } /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; ((local_info_t *)link->priv)->eth_dev = init_airo_card(link->irq.AssignedIRQ, - link->io.BasePort1, 1, &handle_to_dev(link)); + link->io.BasePort1, 1, &link->dev); if (!((local_info_t *)link->priv)->eth_dev) - goto cs_failed; + goto failed; /* At this point, the dev_node_t structure(s) need to be @@ -368,8 +353,6 @@ static int airo_config(struct pcmcia_device *link) kfree(req); return 0; - cs_failed: - cs_error(link, last_fn, last_ret); failed: airo_release(link); kfree(req); @@ -386,7 +369,7 @@ static int airo_config(struct pcmcia_device *link) static void airo_release(struct pcmcia_device *link) { - DEBUG(0, "airo_release(0x%p)\n", link); + dev_dbg(&link->dev, "airo_release\n"); pcmcia_disable_device(link); } |