summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath10k/wmi.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
-rw-r--r--drivers/net/wireless/ath/ath10k/wmi.h157
1 files changed, 155 insertions, 2 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 78c991aec7f..4b5e7d3d32b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -893,6 +893,7 @@ struct wmi_channel {
union {
__le32 reginfo0;
struct {
+ /* note: power unit is 0.5 dBm */
u8 min_power;
u8 max_power;
u8 reg_power;
@@ -915,7 +916,8 @@ struct wmi_channel_arg {
bool allow_ht;
bool allow_vht;
bool ht40plus;
- /* note: power unit is 1/4th of dBm */
+ bool chan_radar;
+ /* note: power unit is 0.5 dBm */
u32 min_power;
u32 max_power;
u32 max_reg_power;
@@ -1977,6 +1979,10 @@ struct wmi_mgmt_rx_event_v2 {
#define WMI_RX_STATUS_ERR_MIC 0x10
#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
+#define PHY_ERROR_SPECTRAL_SCAN 0x26
+#define PHY_ERROR_FALSE_RADAR_EXT 0x24
+#define PHY_ERROR_RADAR 0x05
+
struct wmi_single_phyerr_rx_hdr {
/* TSF timestamp */
__le32 tsf_timestamp;
@@ -2068,6 +2074,87 @@ struct wmi_comb_phyerr_rx_event {
u8 bufp[0];
} __packed;
+#define PHYERR_TLV_SIG 0xBB
+#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
+#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
+
+struct phyerr_radar_report {
+ __le32 reg0; /* RADAR_REPORT_REG0_* */
+ __le32 reg1; /* REDAR_REPORT_REG1_* */
+} __packed;
+
+#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
+#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
+
+#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
+#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
+
+#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
+#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
+
+#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
+#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
+
+#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
+#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
+
+#define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
+#define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
+
+#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
+#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
+
+#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
+#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
+
+#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
+#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
+
+#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
+#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
+
+#define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
+#define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
+
+struct phyerr_fft_report {
+ __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
+ __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
+} __packed;
+
+#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
+#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
+
+#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
+#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
+
+#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
+#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
+
+#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
+#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
+
+#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
+#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
+
+#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
+#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
+
+#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
+#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
+
+#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
+#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
+
+
+struct phyerr_tlv {
+ __le16 len;
+ u8 tag;
+ u8 sig;
+} __packed;
+
+#define DFS_RSSI_POSSIBLY_FALSE 50
+#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
+
struct wmi_mgmt_tx_hdr {
__le32 vdev_id;
struct wmi_mac_addr peer_macaddr;
@@ -2233,7 +2320,12 @@ enum wmi_pdev_param {
* 0: no protection 1:use CTS-to-self 2: use RTS/CTS
*/
WMI_PDEV_PARAM_PROTECTION_MODE,
- /* Dynamic bandwidth 0: disable 1: enable */
+ /*
+ * Dynamic bandwidth - 0: disable, 1: enable
+ *
+ * When enabled HW rate control tries different bandwidths when
+ * retransmitting frames.
+ */
WMI_PDEV_PARAM_DYNAMIC_BW,
/* Non aggregrate/ 11g sw retry threshold.0-disable */
WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
@@ -2911,6 +3003,18 @@ struct wmi_vdev_install_key_arg {
const void *key_data;
};
+/*
+ * vdev fixed rate format:
+ * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
+ * - nss - b5:b4 - ss number (0 mean 1ss)
+ * - rate_mcs - b3:b0 - as below
+ * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
+ * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
+ * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
+ * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
+ * HT/VHT: MCS index
+ */
+
/* Preamble types to be used with VDEV fixed rate configuration */
enum wmi_rate_preamble {
WMI_RATE_PREAMBLE_OFDM,
@@ -3998,6 +4102,54 @@ struct wmi_force_fw_hang_cmd {
__le32 delay_ms;
} __packed;
+enum ath10k_dbglog_level {
+ ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
+ ATH10K_DBGLOG_LEVEL_INFO = 1,
+ ATH10K_DBGLOG_LEVEL_WARN = 2,
+ ATH10K_DBGLOG_LEVEL_ERR = 3,
+};
+
+/* VAP ids to enable dbglog */
+#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
+#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
+
+/* to enable dbglog in the firmware */
+#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
+#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
+
+/* timestamp resolution */
+#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
+#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
+
+/* number of queued messages before sending them to the host */
+#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
+#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
+
+/*
+ * Log levels to enable. This defines the minimum level to enable, this is
+ * not a bitmask. See enum ath10k_dbglog_level for the values.
+ */
+#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
+#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
+
+/*
+ * Note: this is a cleaned up version of a struct firmware uses. For
+ * example, config_valid was hidden inside an array.
+ */
+struct wmi_dbglog_cfg_cmd {
+ /* bitmask to hold mod id config*/
+ __le32 module_enable;
+
+ /* see ATH10K_DBGLOG_CFG_ */
+ __le32 config_enable;
+
+ /* mask of module id bits to be changed */
+ __le32 module_valid;
+
+ /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
+ __le32 config_valid;
+} __packed;
+
#define ATH10K_RTS_MAX 2347
#define ATH10K_FRAGMT_THRESHOLD_MIN 540
#define ATH10K_FRAGMT_THRESHOLD_MAX 2346
@@ -4075,5 +4227,6 @@ int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id);
int ath10k_wmi_force_fw_hang(struct ath10k *ar,
enum wmi_force_fw_hang_type type, u32 delay_ms);
int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable);
#endif /* _WMI_H_ */