diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/ath5k.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ath5k.h | 1354 |
1 files changed, 1354 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h new file mode 100644 index 00000000000..60c6d2edc4b --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -0,0 +1,1354 @@ +/* + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _ATH5K_H +#define _ATH5K_H + +/* TODO: Clean up channel debuging -doesn't work anyway- and start + * working on reg. control code using all available eeprom information + * -rev. engineering needed- */ +#define CHAN_DEBUG 0 + +#include <linux/io.h> +#include <linux/types.h> +#include <net/mac80211.h> + +#include "../regd.h" + +/* RX/TX descriptor hw structs + * TODO: Driver part should only see sw structs */ +#include "desc.h" + +/* EEPROM structs/offsets + * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) + * and clean up common bits, then introduce set/get functions in eeprom.c */ +#include "eeprom.h" + +/* PCI IDs */ +#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ +#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ +#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ +#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ +#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ +#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ +#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ +#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ +#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ +#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ + +/****************************\ + GENERIC DRIVER DEFINITIONS +\****************************/ + +#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) + +#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ + printk(_level "ath5k %s: " _fmt, \ + ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ + ##__VA_ARGS__) + +#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ + if (net_ratelimit()) \ + ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ + } while (0) + +#define ATH5K_INFO(_sc, _fmt, ...) \ + ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) + +#define ATH5K_WARN(_sc, _fmt, ...) \ + ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) + +#define ATH5K_ERR(_sc, _fmt, ...) \ + ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) + +/* + * AR5K REGISTER ACCESS + */ + +/* Some macros to read/write fields */ + +/* First shift, then mask */ +#define AR5K_REG_SM(_val, _flags) \ + (((_val) << _flags##_S) & (_flags)) + +/* First mask, then shift */ +#define AR5K_REG_MS(_val, _flags) \ + (((_val) & (_flags)) >> _flags##_S) + +/* Some registers can hold multiple values of interest. For this + * reason when we want to write to these registers we must first + * retrieve the values which we do not want to clear (lets call this + * old_data) and then set the register with this and our new_value: + * ( old_data | new_value) */ +#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ + (((_val) << _flags##_S) & (_flags)), _reg) + +#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ + (_mask)) | (_flags), _reg) + +#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) + +#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) + +/* Access to PHY registers */ +#define AR5K_PHY_READ(ah, _reg) \ + ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) + +#define AR5K_PHY_WRITE(ah, _reg, _val) \ + ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) + +/* Access QCU registers per queue */ +#define AR5K_REG_READ_Q(ah, _reg, _queue) \ + (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ + +#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ + ath5k_hw_reg_write(ah, (1 << _queue), _reg) + +#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ + _reg |= 1 << _queue; \ +} while (0) + +#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ + _reg &= ~(1 << _queue); \ +} while (0) + +/* Used while writing initvals */ +#define AR5K_REG_WAIT(_i) do { \ + if (_i % 64) \ + udelay(1); \ +} while (0) + +/* Register dumps are done per operation mode */ +#define AR5K_INI_RFGAIN_5GHZ 0 +#define AR5K_INI_RFGAIN_2GHZ 1 + +/* TODO: Clean this up */ +#define AR5K_INI_VAL_11A 0 +#define AR5K_INI_VAL_11A_TURBO 1 +#define AR5K_INI_VAL_11B 2 +#define AR5K_INI_VAL_11G 3 +#define AR5K_INI_VAL_11G_TURBO 4 +#define AR5K_INI_VAL_XR 0 +#define AR5K_INI_VAL_MAX 5 + +/* Used for BSSID etc manipulation */ +#define AR5K_LOW_ID(_a)( \ +(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ +) + +#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) + +/* + * Some tuneable values (these should be changeable by the user) + * TODO: Make use of them and add more options OR use debug/configfs + */ +#define AR5K_TUNE_DMA_BEACON_RESP 2 +#define AR5K_TUNE_SW_BEACON_RESP 10 +#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 +#define AR5K_TUNE_RADAR_ALERT false +#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 +#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) +#define AR5K_TUNE_REGISTER_TIMEOUT 20000 +/* Register for RSSI threshold has a mask of 0xff, so 255 seems to + * be the max value. */ +#define AR5K_TUNE_RSSI_THRES 129 +/* This must be set when setting the RSSI threshold otherwise it can + * prevent a reset. If AR5K_RSSI_THR is read after writing to it + * the BMISS_THRES will be seen as 0, seems harware doesn't keep + * track of it. Max value depends on harware. For AR5210 this is just 7. + * For AR5211+ this seems to be up to 255. */ +#define AR5K_TUNE_BMISS_THRES 7 +#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 +#define AR5K_TUNE_BEACON_INTERVAL 100 +#define AR5K_TUNE_AIFS 2 +#define AR5K_TUNE_AIFS_11B 2 +#define AR5K_TUNE_AIFS_XR 0 +#define AR5K_TUNE_CWMIN 15 +#define AR5K_TUNE_CWMIN_11B 31 +#define AR5K_TUNE_CWMIN_XR 3 +#define AR5K_TUNE_CWMAX 1023 +#define AR5K_TUNE_CWMAX_11B 1023 +#define AR5K_TUNE_CWMAX_XR 7 +#define AR5K_TUNE_NOISE_FLOOR -72 +#define AR5K_TUNE_MAX_TXPOWER 63 +#define AR5K_TUNE_DEFAULT_TXPOWER 25 +#define AR5K_TUNE_TPC_TXPOWER false +#define AR5K_TUNE_ANT_DIVERSITY true +#define AR5K_TUNE_HWTXTRIES 4 + +#define AR5K_INIT_CARR_SENSE_EN 1 + +/*Swap RX/TX Descriptor for big endian archs*/ +#if defined(__BIG_ENDIAN) +#define AR5K_INIT_CFG ( \ + AR5K_CFG_SWTD | AR5K_CFG_SWRD \ +) +#else +#define AR5K_INIT_CFG 0x00000000 +#endif + +/* Initial values */ +#define AR5K_INIT_CYCRSSI_THR1 2 +#define AR5K_INIT_TX_LATENCY 502 +#define AR5K_INIT_USEC 39 +#define AR5K_INIT_USEC_TURBO 79 +#define AR5K_INIT_USEC_32 31 +#define AR5K_INIT_SLOT_TIME 396 +#define AR5K_INIT_SLOT_TIME_TURBO 480 +#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 +#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 +#define AR5K_INIT_PROG_IFS 920 +#define AR5K_INIT_PROG_IFS_TURBO 960 +#define AR5K_INIT_EIFS 3440 +#define AR5K_INIT_EIFS_TURBO 6880 +#define AR5K_INIT_SIFS 560 +#define AR5K_INIT_SIFS_TURBO 480 +#define AR5K_INIT_SH_RETRY 10 +#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY +#define AR5K_INIT_SSH_RETRY 32 +#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY +#define AR5K_INIT_TX_RETRY 10 + +#define AR5K_INIT_TRANSMIT_LATENCY ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC) \ +) +#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC_TURBO) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ + (AR5K_INIT_PROG_IFS) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ + (AR5K_INIT_PROG_IFS_TURBO) \ +) + +/* token to use for aifs, cwmin, cwmax in MadWiFi */ +#define AR5K_TXQ_USEDEFAULT ((u32) -1) + +/* GENERIC CHIPSET DEFINITIONS */ + +/* MAC Chips */ +enum ath5k_version { + AR5K_AR5210 = 0, + AR5K_AR5211 = 1, + AR5K_AR5212 = 2, +}; + +/* PHY Chips */ +enum ath5k_radio { + AR5K_RF5110 = 0, + AR5K_RF5111 = 1, + AR5K_RF5112 = 2, + AR5K_RF2413 = 3, + AR5K_RF5413 = 4, + AR5K_RF2316 = 5, + AR5K_RF2317 = 6, + AR5K_RF2425 = 7, +}; + +/* + * Common silicon revision/version values + */ + +enum ath5k_srev_type { + AR5K_VERSION_MAC, + AR5K_VERSION_RAD, +}; + +struct ath5k_srev_name { + const char *sr_name; + enum ath5k_srev_type sr_type; + u_int sr_val; +}; + +#define AR5K_SREV_UNKNOWN 0xffff + +#define AR5K_SREV_AR5210 0x00 /* Crete */ +#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ +#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ +#define AR5K_SREV_AR5311B 0x30 /* Spirit */ +#define AR5K_SREV_AR5211 0x40 /* Oahu */ +#define AR5K_SREV_AR5212 0x50 /* Venice */ +#define AR5K_SREV_AR5213 0x55 /* ??? */ +#define AR5K_SREV_AR5213A 0x59 /* Hainan */ +#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ +#define AR5K_SREV_AR2414 0x70 /* Griffin */ +#define AR5K_SREV_AR5424 0x90 /* Condor */ +#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ +#define AR5K_SREV_AR5414 0xa0 /* Eagle */ +#define AR5K_SREV_AR2415 0xb0 /* Talon */ +#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ +#define AR5K_SREV_AR5418 0xca /* PCI-E */ +#define AR5K_SREV_AR2425 0xe0 /* Swan */ +#define AR5K_SREV_AR2417 0xf0 /* Nala */ + +#define AR5K_SREV_RAD_5110 0x00 +#define AR5K_SREV_RAD_5111 0x10 +#define AR5K_SREV_RAD_5111A 0x15 +#define AR5K_SREV_RAD_2111 0x20 +#define AR5K_SREV_RAD_5112 0x30 +#define AR5K_SREV_RAD_5112A 0x35 +#define AR5K_SREV_RAD_5112B 0x36 +#define AR5K_SREV_RAD_2112 0x40 +#define AR5K_SREV_RAD_2112A 0x45 +#define AR5K_SREV_RAD_2112B 0x46 +#define AR5K_SREV_RAD_2413 0x50 +#define AR5K_SREV_RAD_5413 0x60 +#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ +#define AR5K_SREV_RAD_2317 0x80 +#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ +#define AR5K_SREV_RAD_2425 0xa2 +#define AR5K_SREV_RAD_5133 0xc0 + +#define AR5K_SREV_PHY_5211 0x30 +#define AR5K_SREV_PHY_5212 0x41 +#define AR5K_SREV_PHY_5212A 0x42 +#define AR5K_SREV_PHY_5212B 0x43 +#define AR5K_SREV_PHY_2413 0x45 +#define AR5K_SREV_PHY_5413 0x61 +#define AR5K_SREV_PHY_2425 0x70 + +/* IEEE defs */ +#define IEEE80211_MAX_LEN 2500 + +/* TODO add support to mac80211 for vendor-specific rates and modes */ + +/* + * Some of this information is based on Documentation from: + * + * http://madwifi.org/wiki/ChipsetFeatures/SuperAG + * + * Modulation for Atheros' eXtended Range - range enhancing extension that is + * supposed to double the distance an Atheros client device can keep a + * connection with an Atheros access point. This is achieved by increasing + * the receiver sensitivity up to, -105dBm, which is about 20dB above what + * the 802.11 specifications demand. In addition, new (proprietary) data rates + * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. + * + * Please note that can you either use XR or TURBO but you cannot use both, + * they are exclusive. + * + */ +#define MODULATION_XR 0x00000200 +/* + * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a + * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s + * signaling rate achieved through the bonding of two 54Mbit/s 802.11g + * channels. To use this feature your Access Point must also suport it. + * There is also a distinction between "static" and "dynamic" turbo modes: + * + * - Static: is the dumb version: devices set to this mode stick to it until + * the mode is turned off. + * - Dynamic: is the intelligent version, the network decides itself if it + * is ok to use turbo. As soon as traffic is detected on adjacent channels + * (which would get used in turbo mode), or when a non-turbo station joins + * the network, turbo mode won't be used until the situation changes again. + * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which + * monitors the used radio band in order to decide whether turbo mode may + * be used or not. + * + * This article claims Super G sticks to bonding of channels 5 and 6 for + * USA: + * + * http://www.pcworld.com/article/id,113428-page,1/article.html + * + * The channel bonding seems to be driver specific though. In addition to + * deciding what channels will be used, these "Turbo" modes are accomplished + * by also enabling the following features: + * + * - Bursting: allows multiple frames to be sent at once, rather than pausing + * after each frame. Bursting is a standards-compliant feature that can be + * used with any Access Point. + * - Fast frames: increases the amount of information that can be sent per + * frame, also resulting in a reduction of transmission overhead. It is a + * proprietary feature that needs to be supported by the Access Point. + * - Compression: data frames are compressed in real time using a Lempel Ziv + * algorithm. This is done transparently. Once this feature is enabled, + * compression and decompression takes place inside the chipset, without + * putting additional load on the host CPU. + * + */ +#define MODULATION_TURBO 0x00000080 + +enum ath5k_driver_mode { + AR5K_MODE_11A = 0, + AR5K_MODE_11A_TURBO = 1, + AR5K_MODE_11B = 2, + AR5K_MODE_11G = 3, + AR5K_MODE_11G_TURBO = 4, + AR5K_MODE_XR = 0, + AR5K_MODE_MAX = 5 +}; + + +/****************\ + TX DEFINITIONS +\****************/ + +/* + * TX Status descriptor + */ +struct ath5k_tx_status { + u16 ts_seqnum; + u16 ts_tstamp; + u8 ts_status; + u8 ts_rate[4]; + u8 ts_retry[4]; + u8 ts_final_idx; + s8 ts_rssi; + u8 ts_shortretry; + u8 ts_longretry; + u8 ts_virtcol; + u8 ts_antenna; +}; + +#define AR5K_TXSTAT_ALTRATE 0x80 +#define AR5K_TXERR_XRETRY 0x01 +#define AR5K_TXERR_FILT 0x02 +#define AR5K_TXERR_FIFO 0x04 + +/** + * enum ath5k_tx_queue - Queue types used to classify tx queues. + * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue + * @AR5K_TX_QUEUE_DATA: A normal data queue + * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue + * @AR5K_TX_QUEUE_BEACON: The beacon queue + * @AR5K_TX_QUEUE_CAB: The after-beacon queue + * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue + */ +enum ath5k_tx_queue { + AR5K_TX_QUEUE_INACTIVE = 0, + AR5K_TX_QUEUE_DATA, + AR5K_TX_QUEUE_XR_DATA, + AR5K_TX_QUEUE_BEACON, + AR5K_TX_QUEUE_CAB, + AR5K_TX_QUEUE_UAPSD, +}; + +#define AR5K_NUM_TX_QUEUES 10 +#define AR5K_NUM_TX_QUEUES_NOQCU 2 + +/* + * Queue syb-types to classify normal data queues. + * These are the 4 Access Categories as defined in + * WME spec. 0 is the lowest priority and 4 is the + * highest. Normal data that hasn't been classified + * goes to the Best Effort AC. + */ +enum ath5k_tx_queue_subtype { + AR5K_WME_AC_BK = 0, /*Background traffic*/ + AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ + AR5K_WME_AC_VI, /*Video traffic*/ + AR5K_WME_AC_VO, /*Voice traffic*/ +}; + +/* + * Queue ID numbers as returned by the hw functions, each number + * represents a hw queue. If hw does not support hw queues + * (eg 5210) all data goes in one queue. These match + * d80211 definitions (net80211/MadWiFi don't use them). + */ +enum ath5k_tx_queue_id { + AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, + AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, + AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ + AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ + AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ + AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ + AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ + AR5K_TX_QUEUE_ID_UAPSD = 8, + AR5K_TX_QUEUE_ID_XR_DATA = 9, +}; + +/* + * Flags to set hw queue's parameters... + */ +#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ +#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ +#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ +#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ +#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ +#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ +#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ +#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ +#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ +#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ +#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ +#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ + +/* + * A struct to hold tx queue's parameters + */ +struct ath5k_txq_info { + enum ath5k_tx_queue tqi_type; + enum ath5k_tx_queue_subtype tqi_subtype; + u16 tqi_flags; /* Tx queue flags (see above) */ + u32 tqi_aifs; /* Arbitrated Interframe Space */ + s32 tqi_cw_min; /* Minimum Contention Window */ + s32 tqi_cw_max; /* Maximum Contention Window */ + u32 tqi_cbr_period; /* Constant bit rate period */ + u32 tqi_cbr_overflow_limit; + u32 tqi_burst_time; + u32 tqi_ready_time; /* Not used */ +}; + +/* + * Transmit packet types. + * used on tx control descriptor + * TODO: Use them inside base.c corectly + */ +enum ath5k_pkt_type { + AR5K_PKT_TYPE_NORMAL = 0, + AR5K_PKT_TYPE_ATIM = 1, + AR5K_PKT_TYPE_PSPOLL = 2, + AR5K_PKT_TYPE_BEACON = 3, + AR5K_PKT_TYPE_PROBE_RESP = 4, + AR5K_PKT_TYPE_PIFS = 5, +}; + +/* + * TX power and TPC settings + */ +#define AR5K_TXPOWER_OFDM(_r, _v) ( \ + ((0 & 1) << ((_v) + 6)) | \ + (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ +) + +#define AR5K_TXPOWER_CCK(_r, _v) ( \ + (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ +) + +/* + * DMA size definitions (2^n+2) + */ +enum ath5k_dmasize { + AR5K_DMASIZE_4B = 0, + AR5K_DMASIZE_8B, + AR5K_DMASIZE_16B, + AR5K_DMASIZE_32B, + AR5K_DMASIZE_64B, + AR5K_DMASIZE_128B, + AR5K_DMASIZE_256B, + AR5K_DMASIZE_512B +}; + + +/****************\ + RX DEFINITIONS +\****************/ + +/* + * RX Status descriptor + */ +struct ath5k_rx_status { + u16 rs_datalen; + u16 rs_tstamp; + u8 rs_status; + u8 rs_phyerr; + s8 rs_rssi; + u8 rs_keyix; + u8 rs_rate; + u8 rs_antenna; + u8 rs_more; +}; + +#define AR5K_RXERR_CRC 0x01 +#define AR5K_RXERR_PHY 0x02 +#define AR5K_RXERR_FIFO 0x04 +#define AR5K_RXERR_DECRYPT 0x08 +#define AR5K_RXERR_MIC 0x10 +#define AR5K_RXKEYIX_INVALID ((u8) - 1) +#define AR5K_TXKEYIX_INVALID ((u32) - 1) + + +/**************************\ + BEACON TIMERS DEFINITIONS +\**************************/ + +#define AR5K_BEACON_PERIOD 0x0000ffff +#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ +#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ + +#if 0 +/** + * struct ath5k_beacon_state - Per-station beacon timer state. + * @bs_interval: in TU's, can also include the above flags + * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a + * Point Coordination Function capable AP + */ +struct ath5k_beacon_state { + u32 bs_next_beacon; + u32 bs_next_dtim; + u32 bs_interval; + u8 bs_dtim_period; + u8 bs_cfp_period; + u16 bs_cfp_max_duration; + u16 bs_cfp_du_remain; + u16 bs_tim_offset; + u16 bs_sleep_duration; + u16 bs_bmiss_threshold; + u32 bs_cfp_next; +}; +#endif + + +/* + * TSF to TU conversion: + * + * TSF is a 64bit value in usec (microseconds). + * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of + * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). + */ +#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) + + +/*******************************\ + GAIN OPTIMIZATION DEFINITIONS +\*******************************/ + +enum ath5k_rfgain { + AR5K_RFGAIN_INACTIVE = 0, + AR5K_RFGAIN_ACTIVE, + AR5K_RFGAIN_READ_REQUESTED, + AR5K_RFGAIN_NEED_CHANGE, +}; + +struct ath5k_gain { + u8 g_step_idx; + u8 g_current; + u8 g_target; + u8 g_low; + u8 g_high; + u8 g_f_corr; + u8 g_state; +}; + +/********************\ + COMMON DEFINITIONS +\********************/ + +#define AR5K_SLOT_TIME_9 396 +#define AR5K_SLOT_TIME_20 880 +#define AR5K_SLOT_TIME_MAX 0xffff + +/* channel_flags */ +#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ +#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ +#define CHANNEL_CCK 0x0020 /* CCK channel */ +#define CHANNEL_OFDM 0x0040 /* OFDM channel */ +#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ +#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ +#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ +#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ +#define CHANNEL_XR 0x0800 /* XR channel */ + +#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) +#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) +#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) +#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) +#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) +#define CHANNEL_108A CHANNEL_T +#define CHANNEL_108G CHANNEL_TG +#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) + +#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ + CHANNEL_TURBO) + +#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) +#define CHANNEL_MODES CHANNEL_ALL + +/* + * Used internaly for reset_tx_queue). + * Also see struct struct ieee80211_channel. + */ +#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) +#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) + +/* + * The following structure is used to map 2GHz channels to + * 5GHz Atheros channels. + * TODO: Clean up + */ +struct ath5k_athchan_2ghz { + u32 a2_flags; + u16 a2_athchan; +}; + + +/******************\ + RATE DEFINITIONS +\******************/ + +/** + * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. + * + * The rate code is used to get the RX rate or set the TX rate on the + * hardware descriptors. It is also used for internal modulation control + * and settings. + * + * This is the hardware rate map we are aware of: + * + * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 + * rate_kbps 3000 1000 ? ? ? 2000 500 48000 + * + * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 + * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? + * + * rate_code 17 18 19 20 21 22 23 24 + * rate_kbps ? ? ? ? ? ? ? 11000 + * + * rate_code 25 26 27 28 29 30 31 32 + * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? + * + * "S" indicates CCK rates with short preamble. + * + * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the + * lowest 4 bits, so they are the same as below with a 0xF mask. + * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). + * We handle this in ath5k_setup_bands(). + */ +#define AR5K_MAX_RATES 32 + +/* B */ +#define ATH5K_RATE_CODE_1M 0x1B +#define ATH5K_RATE_CODE_2M 0x1A +#define ATH5K_RATE_CODE_5_5M 0x19 +#define ATH5K_RATE_CODE_11M 0x18 +/* A and G */ +#define ATH5K_RATE_CODE_6M 0x0B +#define ATH5K_RATE_CODE_9M 0x0F +#define ATH5K_RATE_CODE_12M 0x0A +#define ATH5K_RATE_CODE_18M 0x0E +#define ATH5K_RATE_CODE_24M 0x09 +#define ATH5K_RATE_CODE_36M 0x0D +#define ATH5K_RATE_CODE_48M 0x08 +#define ATH5K_RATE_CODE_54M 0x0C +/* XR */ +#define ATH5K_RATE_CODE_XR_500K 0x07 +#define ATH5K_RATE_CODE_XR_1M 0x02 +#define ATH5K_RATE_CODE_XR_2M 0x06 +#define ATH5K_RATE_CODE_XR_3M 0x01 + +/* adding this flag to rate_code enables short preamble */ +#define AR5K_SET_SHORT_PREAMBLE 0x04 + +/* + * Crypto definitions + */ + +#define AR5K_KEYCACHE_SIZE 8 + +/***********************\ + HW RELATED DEFINITIONS +\***********************/ + +/* + * Misc definitions + */ +#define AR5K_RSSI_EP_MULTIPLIER (1<<7) + +#define AR5K_ASSERT_ENTRY(_e, _s) do { \ + if (_e >= _s) \ + return (false); \ +} while (0) + +/* + * Hardware interrupt abstraction + */ + +/** + * enum ath5k_int - Hardware interrupt masks helpers + * + * @AR5K_INT_RX: mask to identify received frame interrupts, of type + * AR5K_ISR_RXOK or AR5K_ISR_RXERR + * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) + * @AR5K_INT_RXNOFRM: No frame received (?) + * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The + * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's + * LinkPtr is NULL. For more details, refer to: + * http://www.freepatentsonline.com/20030225739.html + * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). + * Note that Rx overrun is not always fatal, on some chips we can continue + * operation without reseting the card, that's why int_fatal is not + * common for all chips. + * @AR5K_INT_TX: mask to identify received frame interrupts, of type + * AR5K_ISR_TXOK or AR5K_ISR_TXERR + * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) + * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold + * We currently do increments on interrupt by + * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 + * @AR5K_INT_MIB: Indicates the Management Information Base counters should be + * checked. We should do this with ath5k_hw_update_mib_counters() but + * it seems we should also then do some noise immunity work. + * @AR5K_INT_RXPHY: RX PHY Error + * @AR5K_INT_RXKCM: RX Key cache miss + * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a + * beacon that must be handled in software. The alternative is if you + * have VEOL support, in that case you let the hardware deal with things. + * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing + * beacons from the AP have associated with, we should probably try to + * reassociate. When in IBSS mode this might mean we have not received + * any beacons from any local stations. Note that every station in an + * IBSS schedules to send beacons at the Target Beacon Transmission Time + * (TBTT) with a random backoff. + * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? + * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now + * until properly handled + * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA + * errors. These types of errors we can enable seem to be of type + * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. + * @AR5K_INT_GLOBAL: Used to clear and set the IER + * @AR5K_INT_NOCARD: signals the card has been removed + * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same + * bit value + * + * These are mapped to take advantage of some common bits + * between the MACs, to be able to set intr properties + * easier. Some of them are not used yet inside hw.c. Most map + * to the respective hw interrupt value as they are common amogst different + * MACs. + */ +enum ath5k_int { + AR5K_INT_RXOK = 0x00000001, + AR5K_INT_RXDESC = 0x00000002, + AR5K_INT_RXERR = 0x00000004, + AR5K_INT_RXNOFRM = 0x00000008, + AR5K_INT_RXEOL = 0x00000010, + AR5K_INT_RXORN = 0x00000020, + AR5K_INT_TXOK = 0x00000040, + AR5K_INT_TXDESC = 0x00000080, + AR5K_INT_TXERR = 0x00000100, + AR5K_INT_TXNOFRM = 0x00000200, + AR5K_INT_TXEOL = 0x00000400, + AR5K_INT_TXURN = 0x00000800, + AR5K_INT_MIB = 0x00001000, + AR5K_INT_SWI = 0x00002000, + AR5K_INT_RXPHY = 0x00004000, + AR5K_INT_RXKCM = 0x00008000, + AR5K_INT_SWBA = 0x00010000, + AR5K_INT_BRSSI = 0x00020000, + AR5K_INT_BMISS = 0x00040000, + AR5K_INT_FATAL = 0x00080000, /* Non common */ + AR5K_INT_BNR = 0x00100000, /* Non common */ + AR5K_INT_TIM = 0x00200000, /* Non common */ + AR5K_INT_DTIM = 0x00400000, /* Non common */ + AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ + AR5K_INT_GPIO = 0x01000000, + AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ + AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ + AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ + AR5K_INT_QCBRORN = 0x10000000, /* Non common */ + AR5K_INT_QCBRURN = 0x20000000, /* Non common */ + AR5K_INT_QTRIG = 0x40000000, /* Non common */ + AR5K_INT_GLOBAL = 0x80000000, + + AR5K_INT_COMMON = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN + | AR5K_INT_MIB + | AR5K_INT_SWI + | AR5K_INT_RXPHY + | AR5K_INT_RXKCM + | AR5K_INT_SWBA + | AR5K_INT_BRSSI + | AR5K_INT_BMISS + | AR5K_INT_GPIO + | AR5K_INT_GLOBAL, + + AR5K_INT_NOCARD = 0xffffffff +}; + +/* + * Power management + */ +enum ath5k_power_mode { + AR5K_PM_UNDEFINED = 0, + AR5K_PM_AUTO, + AR5K_PM_AWAKE, + AR5K_PM_FULL_SLEEP, + AR5K_PM_NETWORK_SLEEP, +}; + +/* + * These match net80211 definitions (not used in + * mac80211). + * TODO: Clean this up + */ +#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ +#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ +#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ +#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ +#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ + +/* GPIO-controlled software LED */ +#define AR5K_SOFTLED_PIN 0 +#define AR5K_SOFTLED_ON 0 +#define AR5K_SOFTLED_OFF 1 + +/* + * Chipset capabilities -see ath5k_hw_get_capability- + * get_capability function is not yet fully implemented + * in ath5k so most of these don't work yet... + * TODO: Implement these & merge with _TUNE_ stuff above + */ +enum ath5k_capability_type { + AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ + AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ + AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ + AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ + AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ + AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ + AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ + AR5K_CAP_COMPRESSION = 8, /* Supports compression */ + AR5K_CAP_BURST = 9, /* Supports packet bursting */ + AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ + AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ + AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ + AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ + AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ + AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ + AR5K_CAP_XR = 16, /* Supports XR mode */ + AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ + AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ + AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ + AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ +}; + + +/* XXX: we *may* move cap_range stuff to struct wiphy */ +struct ath5k_capabilities { + /* + * Supported PHY modes + * (ie. CHANNEL_A, CHANNEL_B, ...) + */ + DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); + + /* + * Frequency range (without regulation restrictions) + */ + struct { + u16 range_2ghz_min; + u16 range_2ghz_max; + u16 range_5ghz_min; + u16 range_5ghz_max; + } cap_range; + + /* + * Values stored in the EEPROM (some of them...) + */ + struct ath5k_eeprom_info cap_eeprom; + + /* + * Queue information + */ + struct { + u8 q_tx_num; + } cap_queues; +}; + + +/***************************************\ + HARDWARE ABSTRACTION LAYER STRUCTURE +\***************************************/ + +/* + * Misc defines + */ + +#define AR5K_MAX_GPIO 10 +#define AR5K_MAX_RF_BANKS 8 + +/* TODO: Clean up and merge with ath5k_softc */ +struct ath5k_hw { + u32 ah_magic; + + struct ath5k_softc *ah_sc; + void __iomem *ah_iobase; + + enum ath5k_int ah_imr; + + enum nl80211_iftype ah_op_mode; + enum ath5k_power_mode ah_power_mode; + struct ieee80211_channel ah_current_channel; + bool ah_turbo; + bool ah_calibration; + bool ah_running; + bool ah_single_chip; + bool ah_combined_mic; + + u32 ah_mac_srev; + u16 ah_mac_version; + u16 ah_mac_revision; + u16 ah_phy_revision; + u16 ah_radio_5ghz_revision; + u16 ah_radio_2ghz_revision; + + enum ath5k_version ah_version; + enum ath5k_radio ah_radio; + u32 ah_phy; + + bool ah_5ghz; + bool ah_2ghz; + +#define ah_modes ah_capabilities.cap_mode +#define ah_ee_version ah_capabilities.cap_eeprom.ee_version + + u32 ah_atim_window; + u32 ah_aifs; + u32 ah_cw_min; + u32 ah_cw_max; + bool ah_software_retry; + u32 ah_limit_tx_retries; + + u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; + bool ah_ant_diversity; + + u8 ah_sta_id[ETH_ALEN]; + + /* Current BSSID we are trying to assoc to / create. + * This is passed by mac80211 on config_interface() and cached here for + * use in resets */ + u8 ah_bssid[ETH_ALEN]; + u8 ah_bssid_mask[ETH_ALEN]; + + u32 ah_gpio[AR5K_MAX_GPIO]; + int ah_gpio_npins; + + struct ath_regulatory ah_regulatory; + struct ath5k_capabilities ah_capabilities; + + struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; + u32 ah_txq_status; + u32 ah_txq_imr_txok; + u32 ah_txq_imr_txerr; + u32 ah_txq_imr_txurn; + u32 ah_txq_imr_txdesc; + u32 ah_txq_imr_txeol; + u32 ah_txq_imr_cbrorn; + u32 ah_txq_imr_cbrurn; + u32 ah_txq_imr_qtrig; + u32 ah_txq_imr_nofrm; + u32 ah_txq_isr; + u32 *ah_rf_banks; + size_t ah_rf_banks_size; + size_t ah_rf_regs_count; + struct ath5k_gain ah_gain; + u8 ah_offset[AR5K_MAX_RF_BANKS]; + + + struct { + /* Temporary tables used for interpolation */ + u8 tmpL[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 tmpR[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; + u16 txp_rates_power_table[AR5K_MAX_RATES]; + u8 txp_min_idx; + bool txp_tpc; + /* Values in 0.25dB units */ + s16 txp_min_pwr; + s16 txp_max_pwr; + s16 txp_offset; + s16 txp_ofdm; + /* Values in dB units */ + s16 txp_cck_ofdm_pwr_delta; + s16 txp_cck_ofdm_gainf_delta; + } ah_txpower; + + struct { + bool r_enabled; + int r_last_alert; + struct ieee80211_channel r_last_channel; + } ah_radar; + + /* noise floor from last periodic calibration */ + s32 ah_noise_floor; + + /* + * Function pointers + */ + int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags); + int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int); + int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int); + int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + struct ath5k_tx_status *); + int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, + struct ath5k_rx_status *); +}; + +/* + * Prototypes + */ + +/* Attach/Detach Functions */ +extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); +extern void ath5k_hw_detach(struct ath5k_hw *ah); + +/* LED functions */ +extern int ath5k_init_leds(struct ath5k_softc *sc); +extern void ath5k_led_enable(struct ath5k_softc *sc); +extern void ath5k_led_off(struct ath5k_softc *sc); +extern void ath5k_unregister_leds(struct ath5k_softc *sc); + +/* Reset Functions */ +extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); +extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel); +/* Power management functions */ +extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); + +/* DMA Related Functions */ +extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); +extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); +extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); +extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); +extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, + u32 phys_addr); +extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); +/* Interrupt handling */ +extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); +extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); +extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum +ath5k_int new_mask); +extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats); + +/* EEPROM access functions */ +extern int ath5k_eeprom_init(struct ath5k_hw *ah); +extern void ath5k_eeprom_detach(struct ath5k_hw *ah); +extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); +extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah); + +/* Protocol Control Unit Functions */ +extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); +/* BSSID Functions */ +extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac); +extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); +extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id); +extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); +/* Receive start/stop functions */ +extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); +extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); +/* RX Filter functions */ +extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); +extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index); +extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); +extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); +extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); +/* Beacon control functions */ +extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); +extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); +extern void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); +extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); +extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); +#if 0 +extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state); +extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah); +extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr); +#endif +/* ACK bit rate */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); +/* ACK/CTS Timeouts */ +extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout); +extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah); +extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout); +extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah); +/* Key table (WEP) functions */ +extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); +extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); +extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); +extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); + +/* Queue Control Unit, DFS Control Unit Functions */ +extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); +extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info); +extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, + enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info); +extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); +extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); +extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); +extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); + +/* Hardware Descriptor Functions */ +extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); + +/* GPIO Functions */ +extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); +extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); +extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); +extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); + +/* Misc functions */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah); +extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); +extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); +extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); + +/* Initial register settings functions */ +extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); + +/* Initialize RF */ +extern int ath5k_hw_rfregs_init(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + unsigned int mode); +extern int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq); +extern enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); +extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); +/* PHY/RF channel functions */ +extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); +extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); +/* PHY calibration */ +extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); +extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); +/* Misc PHY functions */ +extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); +extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); +extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); +extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* TX power setup */ +extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower); +extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower); + +/* + * Functions used internaly + */ + +/* + * Translate usec to hw clock units + * TODO: Half/quarter rate + */ +static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) +{ + return turbo ? (usec * 80) : (usec * 40); +} + +/* + * Translate hw clock units to usec + * TODO: Half/quarter rate + */ +static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) +{ + return turbo ? (clock / 80) : (clock / 40); +} + +/* + * Read from a register + */ +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return ioread32(ah->ah_iobase + reg); +} + +/* + * Write to a register + */ +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + iowrite32(val, ah->ah_iobase + reg); +} + +#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY) +/* + * Check if a register write has been completed + */ +static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, + u32 val, bool is_set) +{ + int i; + u32 data; + + for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { + data = ath5k_hw_reg_read(ah, reg); + if (is_set && (data & flag)) + break; + else if ((data & flag) == val) + break; + udelay(15); + } + + return (i <= 0) ? -EAGAIN : 0; +} +#endif + +static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) +{ + u32 retval = 0, bit, i; + + for (i = 0; i < bits; i++) { + bit = (val >> i) & 1; + retval = (retval << 1) | bit; + } + + return retval; +} + +static inline int ath5k_pad_size(int hdrlen) +{ + return (hdrlen < 24) ? 0 : hdrlen & 3; +} + +#endif |