summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath5k/dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/dma.c')
-rw-r--r--drivers/net/wireless/ath/ath5k/dma.c370
1 files changed, 221 insertions, 149 deletions
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index 2481f9c7f4b..5cc9aa81469 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -20,16 +20,13 @@
* DMA and interrupt masking functions *
\*************************************/
-/*
- * dma.c - DMA and interrupt masking functions
+/**
+ * DOC: DMA and interrupt masking functions
*
* Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
* handle queue setup for 5210 chipset (rest are handled on qcu.c).
* Also we setup interrupt mask register (IMR) and read the various interrupt
* status registers (ISR).
- *
- * TODO: Handle SISR on 5211+ and introduce a function to return the queue
- * number that resulted the interrupt.
*/
#include "ath5k.h"
@@ -42,22 +39,22 @@
\*********/
/**
- * ath5k_hw_start_rx_dma - Start DMA receive
- *
+ * ath5k_hw_start_rx_dma() - Start DMA receive
* @ah: The &struct ath5k_hw
*/
-void ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
+void
+ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
{
ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
ath5k_hw_reg_read(ah, AR5K_CR);
}
/**
- * ath5k_hw_stop_rx_dma - Stop DMA receive
- *
+ * ath5k_hw_stop_rx_dma() - Stop DMA receive
* @ah: The &struct ath5k_hw
*/
-static int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+static int
+ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
{
unsigned int i;
@@ -79,24 +76,24 @@ static int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
}
/**
- * ath5k_hw_get_rxdp - Get RX Descriptor's address
- *
+ * ath5k_hw_get_rxdp() - Get RX Descriptor's address
* @ah: The &struct ath5k_hw
*/
-u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
+u32
+ath5k_hw_get_rxdp(struct ath5k_hw *ah)
{
return ath5k_hw_reg_read(ah, AR5K_RXDP);
}
/**
- * ath5k_hw_set_rxdp - Set RX Descriptor's address
- *
+ * ath5k_hw_set_rxdp() - Set RX Descriptor's address
* @ah: The &struct ath5k_hw
* @phys_addr: RX descriptor address
*
* Returns -EIO if rx is active
*/
-int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
+int
+ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
{
if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) {
ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
@@ -114,8 +111,7 @@ int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
\**********/
/**
- * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue
- *
+ * ath5k_hw_start_tx_dma() - Start DMA transmit for a specific queue
* @ah: The &struct ath5k_hw
* @queue: The hw queue number
*
@@ -128,7 +124,8 @@ int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
* NOTE: Must be called after setting up tx control descriptor for that
* queue (see below).
*/
-int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+int
+ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
{
u32 tx_queue;
@@ -177,17 +174,16 @@ int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
}
/**
- * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue
- *
+ * ath5k_hw_stop_tx_dma() - Stop DMA transmit on a specific queue
* @ah: The &struct ath5k_hw
* @queue: The hw queue number
*
* Stop DMA transmit on a specific hw queue and drain queue so we don't
* have any pending frames. Returns -EBUSY if we still have pending frames,
* -EINVAL if queue number is out of range or inactive.
- *
*/
-static int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+static int
+ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
{
unsigned int i = 40;
u32 tx_queue, pending;
@@ -320,14 +316,14 @@ static int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
}
/**
- * ath5k_hw_stop_beacon_queue - Stop beacon queue
- *
- * @ah The &struct ath5k_hw
- * @queue The queue number
+ * ath5k_hw_stop_beacon_queue() - Stop beacon queue
+ * @ah: The &struct ath5k_hw
+ * @queue: The queue number
*
* Returns -EIO if queue didn't stop
*/
-int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
+int
+ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
{
int ret;
ret = ath5k_hw_stop_tx_dma(ah, queue);
@@ -340,8 +336,7 @@ int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
}
/**
- * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue
- *
+ * ath5k_hw_get_txdp() - Get TX Descriptor's address for a specific queue
* @ah: The &struct ath5k_hw
* @queue: The hw queue number
*
@@ -352,7 +347,8 @@ int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
*
* XXX: Is TXDP read and clear ?
*/
-u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
+u32
+ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
{
u16 tx_reg;
@@ -382,10 +378,10 @@ u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
}
/**
- * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue
- *
+ * ath5k_hw_set_txdp() - Set TX Descriptor's address for a specific queue
* @ah: The &struct ath5k_hw
* @queue: The hw queue number
+ * @phys_addr: The physical address
*
* Set TX descriptor's address for a specific queue. For 5210 we ignore
* the queue number and we use tx queue type since we only have 2 queues
@@ -394,7 +390,8 @@ u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
* Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still
* active.
*/
-int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
+int
+ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
{
u16 tx_reg;
@@ -435,8 +432,7 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
}
/**
- * ath5k_hw_update_tx_triglevel - Update tx trigger level
- *
+ * ath5k_hw_update_tx_triglevel() - Update tx trigger level
* @ah: The &struct ath5k_hw
* @increase: Flag to force increase of trigger level
*
@@ -444,15 +440,15 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
* buffer (aka FIFO threshold) that is used to indicate when PCU flushes
* the buffer and transmits its data. Lowering this results sending small
* frames more quickly but can lead to tx underruns, raising it a lot can
- * result other problems (i think bmiss is related). Right now we start with
- * the lowest possible (64Bytes) and if we get tx underrun we increase it using
- * the increase flag. Returns -EIO if we have reached maximum/minimum.
+ * result other problems. Right now we start with the lowest possible
+ * (64Bytes) and if we get tx underrun we increase it using the increase
+ * flag. Returns -EIO if we have reached maximum/minimum.
*
* XXX: Link this with tx DMA size ?
- * XXX: Use it to save interrupts ?
- * TODO: Needs testing, i think it's related to bmiss...
+ * XXX2: Use it to save interrupts ?
*/
-int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
+int
+ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
{
u32 trigger_level, imr;
int ret = -EIO;
@@ -498,21 +494,20 @@ done:
\*******************/
/**
- * ath5k_hw_is_intr_pending - Check if we have pending interrupts
- *
+ * ath5k_hw_is_intr_pending() - Check if we have pending interrupts
* @ah: The &struct ath5k_hw
*
* Check if we have pending interrupts to process. Returns 1 if we
* have pending interrupts and 0 if we haven't.
*/
-bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
+bool
+ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
{
return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
}
/**
- * ath5k_hw_get_isr - Get interrupt status
- *
+ * ath5k_hw_get_isr() - Get interrupt status
* @ah: The @struct ath5k_hw
* @interrupt_mask: Driver's interrupt mask used to filter out
* interrupts in sw.
@@ -523,62 +518,162 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
* being mapped on some standard non hw-specific positions
* (check out &ath5k_int).
*
- * NOTE: We use read-and-clear register, so after this function is called ISR
- * is zeroed.
+ * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this
+ * function gets called are cleared on return.
*/
-int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
+int
+ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
{
- u32 data;
+ u32 data = 0;
/*
- * Read interrupt status from the Interrupt Status register
- * on 5210
+ * Read interrupt status from Primary Interrupt
+ * Register.
+ *
+ * Note: PISR/SISR Not available on 5210
*/
if (ah->ah_version == AR5K_AR5210) {
- data = ath5k_hw_reg_read(ah, AR5K_ISR);
- if (unlikely(data == AR5K_INT_NOCARD)) {
- *interrupt_mask = data;
+ u32 isr = 0;
+ isr = ath5k_hw_reg_read(ah, AR5K_ISR);
+ if (unlikely(isr == AR5K_INT_NOCARD)) {
+ *interrupt_mask = isr;
return -ENODEV;
}
- } else {
+
/*
- * Read interrupt status from Interrupt
- * Status Register shadow copy (Read And Clear)
- *
- * Note: PISR/SISR Not available on 5210
+ * Filter out the non-common bits from the interrupt
+ * status.
*/
- data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
- if (unlikely(data == AR5K_INT_NOCARD)) {
- *interrupt_mask = data;
+ *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr;
+
+ /* Hanlde INT_FATAL */
+ if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
+ | AR5K_ISR_DPERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*
+ * XXX: BMISS interrupts may occur after association.
+ * I found this on 5210 code but it needs testing. If this is
+ * true we should disable them before assoc and re-enable them
+ * after a successful assoc + some jiffies.
+ interrupt_mask &= ~AR5K_INT_BMISS;
+ */
+
+ data = isr;
+ } else {
+ u32 pisr = 0;
+ u32 pisr_clear = 0;
+ u32 sisr0 = 0;
+ u32 sisr1 = 0;
+ u32 sisr2 = 0;
+ u32 sisr3 = 0;
+ u32 sisr4 = 0;
+
+ /* Read PISR and SISRs... */
+ pisr = ath5k_hw_reg_read(ah, AR5K_PISR);
+ if (unlikely(pisr == AR5K_INT_NOCARD)) {
+ *interrupt_mask = pisr;
return -ENODEV;
}
- }
- /*
- * Get abstract interrupt mask (driver-compatible)
- */
- *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
+ sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0);
+ sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1);
+ sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2);
+ sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3);
+ sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4);
- if (ah->ah_version != AR5K_AR5210) {
- u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2);
+ /*
+ * PISR holds the logical OR of interrupt bits
+ * from SISR registers:
+ *
+ * TXOK and TXDESC -> Logical OR of TXOK and TXDESC
+ * per-queue bits on SISR0
+ *
+ * TXERR and TXEOL -> Logical OR of TXERR and TXEOL
+ * per-queue bits on SISR1
+ *
+ * TXURN -> Logical OR of TXURN per-queue bits on SISR2
+ *
+ * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2
+ *
+ * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC
+ * BCN_TIMEOUT, CAB_TIMEOUT and DTIM
+ * (and TSFOOR ?) bits on SISR2
+ *
+ * QCBRORN and QCBRURN -> Logical OR of QCBRORN and
+ * QCBRURN per-queue bits on SISR3
+ * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4
+ *
+ * If we clean these bits on PISR we 'll also clear all
+ * related bits from SISRs, e.g. if we write the TXOK bit on
+ * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK
+ * interrupt got fired for another queue while we were reading
+ * the interrupt registers and we write back the TXOK bit on
+ * PISR we 'll lose it. So make sure that we don't write back
+ * on PISR any bits that come from SISRs. Clearing them from
+ * SISRs will also clear PISR so no need to worry here.
+ */
- /*HIU = Host Interface Unit (PCI etc)*/
- if (unlikely(data & (AR5K_ISR_HIUERR)))
- *interrupt_mask |= AR5K_INT_FATAL;
+ pisr_clear = pisr & ~AR5K_ISR_BITS_FROM_SISRS;
- /*Beacon Not Ready*/
- if (unlikely(data & (AR5K_ISR_BNR)))
- *interrupt_mask |= AR5K_INT_BNR;
+ /*
+ * Write to clear them...
+ * Note: This means that each bit we write back
+ * to the registers will get cleared, leaving the
+ * rest unaffected. So this won't affect new interrupts
+ * we didn't catch while reading/processing, we 'll get
+ * them next time get_isr gets called.
+ */
+ ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0);
+ ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1);
+ ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2);
+ ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3);
+ ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4);
+ ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR);
+ /* Flush previous write */
+ ath5k_hw_reg_read(ah, AR5K_PISR);
- if (unlikely(sisr2 & (AR5K_SISR2_SSERR |
- AR5K_SISR2_DPERR |
- AR5K_SISR2_MCABT)))
- *interrupt_mask |= AR5K_INT_FATAL;
+ /*
+ * Filter out the non-common bits from the interrupt
+ * status.
+ */
+ *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr;
+
+
+ /* We treat TXOK,TXDESC, TXERR and TXEOL
+ * the same way (schedule the tx tasklet)
+ * so we track them all together per queue */
+ if (pisr & AR5K_ISR_TXOK)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
+ AR5K_SISR0_QCU_TXOK);
- if (data & AR5K_ISR_TIM)
+ if (pisr & AR5K_ISR_TXDESC)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
+ AR5K_SISR0_QCU_TXDESC);
+
+ if (pisr & AR5K_ISR_TXERR)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
+ AR5K_SISR1_QCU_TXERR);
+
+ if (pisr & AR5K_ISR_TXEOL)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
+ AR5K_SISR1_QCU_TXEOL);
+
+ /* Currently this is not much usefull since we treat
+ * all queues the same way if we get a TXURN (update
+ * tx trigger level) but we might need it later on*/
+ if (pisr & AR5K_ISR_TXURN)
+ ah->ah_txq_isr_txurn |= AR5K_REG_MS(sisr2,
+ AR5K_SISR2_QCU_TXURN);
+
+ /* Misc Beacon related interrupts */
+
+ /* For AR5211 */
+ if (pisr & AR5K_ISR_TIM)
*interrupt_mask |= AR5K_INT_TIM;
- if (data & AR5K_ISR_BCNMISC) {
+ /* For AR5212+ */
+ if (pisr & AR5K_ISR_BCNMISC) {
if (sisr2 & AR5K_SISR2_TIM)
*interrupt_mask |= AR5K_INT_TIM;
if (sisr2 & AR5K_SISR2_DTIM)
@@ -591,63 +686,39 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
*interrupt_mask |= AR5K_INT_CAB_TIMEOUT;
}
- if (data & AR5K_ISR_RXDOPPLER)
- *interrupt_mask |= AR5K_INT_RX_DOPPLER;
- if (data & AR5K_ISR_QCBRORN) {
+ /* Below interrupts are unlikely to happen */
+
+ /* HIU = Host Interface Unit (PCI etc)
+ * Can be one of MCABT, SSERR, DPERR from SISR2 */
+ if (unlikely(pisr & (AR5K_ISR_HIUERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*Beacon Not Ready*/
+ if (unlikely(pisr & (AR5K_ISR_BNR)))
+ *interrupt_mask |= AR5K_INT_BNR;
+
+ /* A queue got CBR overrun */
+ if (unlikely(pisr & (AR5K_ISR_QCBRORN))) {
*interrupt_mask |= AR5K_INT_QCBRORN;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
- AR5K_SISR3_QCBRORN);
+ ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3,
+ AR5K_SISR3_QCBRORN);
}
- if (data & AR5K_ISR_QCBRURN) {
+
+ /* A queue got CBR underrun */
+ if (unlikely(pisr & (AR5K_ISR_QCBRURN))) {
*interrupt_mask |= AR5K_INT_QCBRURN;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
- AR5K_SISR3_QCBRURN);
+ ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3,
+ AR5K_SISR3_QCBRURN);
}
- if (data & AR5K_ISR_QTRIG) {
+
+ /* A queue got triggered */
+ if (unlikely(pisr & (AR5K_ISR_QTRIG))) {
*interrupt_mask |= AR5K_INT_QTRIG;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR4),
- AR5K_SISR4_QTRIG);
+ ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4,
+ AR5K_SISR4_QTRIG);
}
- if (data & AR5K_ISR_TXOK)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
- AR5K_SISR0_QCU_TXOK);
-
- if (data & AR5K_ISR_TXDESC)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
- AR5K_SISR0_QCU_TXDESC);
-
- if (data & AR5K_ISR_TXERR)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
- AR5K_SISR1_QCU_TXERR);
-
- if (data & AR5K_ISR_TXEOL)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
- AR5K_SISR1_QCU_TXEOL);
-
- if (data & AR5K_ISR_TXURN)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR2),
- AR5K_SISR2_QCU_TXURN);
- } else {
- if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
- | AR5K_ISR_HIUERR | AR5K_ISR_DPERR)))
- *interrupt_mask |= AR5K_INT_FATAL;
-
- /*
- * XXX: BMISS interrupts may occur after association.
- * I found this on 5210 code but it needs testing. If this is
- * true we should disable them before assoc and re-enable them
- * after a successful assoc + some jiffies.
- interrupt_mask &= ~AR5K_INT_BMISS;
- */
+ data = pisr;
}
/*
@@ -661,8 +732,7 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
}
/**
- * ath5k_hw_set_imr - Set interrupt mask
- *
+ * ath5k_hw_set_imr() - Set interrupt mask
* @ah: The &struct ath5k_hw
* @new_mask: The new interrupt mask to be set
*
@@ -670,7 +740,8 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
* ath5k_int bits to hw-specific bits to remove abstraction and writing
* Interrupt Mask Register.
*/
-enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
+enum ath5k_int
+ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
{
enum ath5k_int old_mask, int_mask;
@@ -697,16 +768,14 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2)
& AR5K_SIMR2_QCU_TXURN;
+ /* Fatal interrupt abstraction for 5211+ */
if (new_mask & AR5K_INT_FATAL) {
int_mask |= AR5K_IMR_HIUERR;
simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR
| AR5K_SIMR2_DPERR);
}
- /*Beacon Not Ready*/
- if (new_mask & AR5K_INT_BNR)
- int_mask |= AR5K_INT_BNR;
-
+ /* Misc beacon related interrupts */
if (new_mask & AR5K_INT_TIM)
int_mask |= AR5K_IMR_TIM;
@@ -721,8 +790,9 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
if (new_mask & AR5K_INT_CAB_TIMEOUT)
simr2 |= AR5K_SISR2_CAB_TIMEOUT;
- if (new_mask & AR5K_INT_RX_DOPPLER)
- int_mask |= AR5K_IMR_RXDOPPLER;
+ /*Beacon Not Ready*/
+ if (new_mask & AR5K_INT_BNR)
+ int_mask |= AR5K_INT_BNR;
/* Note: Per queue interrupt masks
* are set via ath5k_hw_reset_tx_queue() (qcu.c) */
@@ -730,10 +800,12 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2);
} else {
+ /* Fatal interrupt abstraction for 5210 */
if (new_mask & AR5K_INT_FATAL)
int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT
| AR5K_IMR_HIUERR | AR5K_IMR_DPERR);
+ /* Only common interrupts left for 5210 (no SIMRs) */
ath5k_hw_reg_write(ah, int_mask, AR5K_IMR);
}
@@ -760,8 +832,7 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
\********************/
/**
- * ath5k_hw_dma_init - Initialize DMA unit
- *
+ * ath5k_hw_dma_init() - Initialize DMA unit
* @ah: The &struct ath5k_hw
*
* Set DMA size and pre-enable interrupts
@@ -770,7 +841,8 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
*
* XXX: Save/restore RXDP/TXDP registers ?
*/
-void ath5k_hw_dma_init(struct ath5k_hw *ah)
+void
+ath5k_hw_dma_init(struct ath5k_hw *ah)
{
/*
* Set Rx/Tx DMA Configuration
@@ -799,8 +871,7 @@ void ath5k_hw_dma_init(struct ath5k_hw *ah)
}
/**
- * ath5k_hw_dma_stop - stop DMA unit
- *
+ * ath5k_hw_dma_stop() - stop DMA unit
* @ah: The &struct ath5k_hw
*
* Stop tx/rx DMA and interrupts. Returns
@@ -810,7 +881,8 @@ void ath5k_hw_dma_init(struct ath5k_hw *ah)
* stuck frames on tx queues, only a reset
* can fix that.
*/
-int ath5k_hw_dma_stop(struct ath5k_hw *ah)
+int
+ath5k_hw_dma_stop(struct ath5k_hw *ah)
{
int i, qmax, err;
err = 0;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-22 22:20:37 +0000