diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath6kl/cfg80211.c')
-rw-r--r-- | drivers/net/wireless/ath/ath6kl/cfg80211.c | 208 |
1 files changed, 174 insertions, 34 deletions
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index b8fce0d4d72..aca1d2689e9 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -53,6 +53,11 @@ #define DEFAULT_BG_SCAN_PERIOD 60 +struct ath6kl_cfg80211_match_probe_ssid { + struct cfg80211_ssid ssid; + u8 flag; +}; + static struct ieee80211_rate ath6kl_rates[] = { RATETAB_ENT(10, 0x1, 0), RATETAB_ENT(20, 0x2, 0), @@ -576,6 +581,9 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, vif->nw_type = vif->next_mode; + /* enable enhanced bmiss detection if applicable */ + ath6kl_cfg80211_sta_bmiss_enhance(vif, true); + if (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) nw_subtype = SUBTYPE_P2PCLIENT; @@ -852,20 +860,6 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason, } } - /* - * Send a disconnect command to target when a disconnect event is - * received with reason code other than 3 (DISCONNECT_CMD - disconnect - * request from host) to make the firmware stop trying to connect even - * after giving disconnect event. There will be one more disconnect - * event for this disconnect command with reason code DISCONNECT_CMD - * which will be notified to cfg80211. - */ - - if (reason != DISCONNECT_CMD) { - ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx); - return; - } - clear_bit(CONNECT_PEND, &vif->flags); if (vif->sme_state == SME_CONNECTING) { @@ -875,32 +869,96 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason, WLAN_STATUS_UNSPECIFIED_FAILURE, GFP_KERNEL); } else if (vif->sme_state == SME_CONNECTED) { - cfg80211_disconnected(vif->ndev, reason, + cfg80211_disconnected(vif->ndev, proto_reason, NULL, 0, GFP_KERNEL); } vif->sme_state = SME_DISCONNECTED; + + /* + * Send a disconnect command to target when a disconnect event is + * received with reason code other than 3 (DISCONNECT_CMD - disconnect + * request from host) to make the firmware stop trying to connect even + * after giving disconnect event. There will be one more disconnect + * event for this disconnect command with reason code DISCONNECT_CMD + * which won't be notified to cfg80211. + */ + if (reason != DISCONNECT_CMD) + ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx); } static int ath6kl_set_probed_ssids(struct ath6kl *ar, struct ath6kl_vif *vif, - struct cfg80211_ssid *ssids, int n_ssids) + struct cfg80211_ssid *ssids, int n_ssids, + struct cfg80211_match_set *match_set, + int n_match_ssid) { - u8 i; + u8 i, j, index_to_add, ssid_found = false; + struct ath6kl_cfg80211_match_probe_ssid ssid_list[MAX_PROBED_SSIDS]; + + memset(ssid_list, 0, sizeof(ssid_list)); - if (n_ssids > MAX_PROBED_SSID_INDEX) + if (n_ssids > MAX_PROBED_SSIDS || + n_match_ssid > MAX_PROBED_SSIDS) return -EINVAL; for (i = 0; i < n_ssids; i++) { + memcpy(ssid_list[i].ssid.ssid, + ssids[i].ssid, + ssids[i].ssid_len); + ssid_list[i].ssid.ssid_len = ssids[i].ssid_len; + + if (ssids[i].ssid_len) + ssid_list[i].flag = SPECIFIC_SSID_FLAG; + else + ssid_list[i].flag = ANY_SSID_FLAG; + + if (n_match_ssid == 0) + ssid_list[i].flag |= MATCH_SSID_FLAG; + } + + index_to_add = i; + + for (i = 0; i < n_match_ssid; i++) { + ssid_found = false; + + for (j = 0; j < n_ssids; j++) { + if ((match_set[i].ssid.ssid_len == + ssid_list[j].ssid.ssid_len) && + (!memcmp(ssid_list[j].ssid.ssid, + match_set[i].ssid.ssid, + match_set[i].ssid.ssid_len))) { + ssid_list[j].flag |= MATCH_SSID_FLAG; + ssid_found = true; + break; + } + } + + if (ssid_found) + continue; + + if (index_to_add >= MAX_PROBED_SSIDS) + continue; + + ssid_list[index_to_add].ssid.ssid_len = + match_set[i].ssid.ssid_len; + memcpy(ssid_list[index_to_add].ssid.ssid, + match_set[i].ssid.ssid, + match_set[i].ssid.ssid_len); + ssid_list[index_to_add].flag |= MATCH_SSID_FLAG; + index_to_add++; + } + + for (i = 0; i < index_to_add; i++) { ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i, - ssids[i].ssid_len ? - SPECIFIC_SSID_FLAG : ANY_SSID_FLAG, - ssids[i].ssid_len, - ssids[i].ssid); + ssid_list[i].flag, + ssid_list[i].ssid.ssid_len, + ssid_list[i].ssid.ssid); + } /* Make sure no old entries are left behind */ - for (i = n_ssids; i < MAX_PROBED_SSID_INDEX; i++) { + for (i = index_to_add; i < MAX_PROBED_SSIDS; i++) { ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i, DISABLE_SSID_FLAG, 0, NULL); } @@ -934,7 +992,7 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev, } ret = ath6kl_set_probed_ssids(ar, vif, request->ssids, - request->n_ssids); + request->n_ssids, NULL, 0); if (ret < 0) return ret; @@ -943,7 +1001,7 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev, WMI_FRAME_PROBE_REQ, request->ie, request->ie_len); if (ret) { - ath6kl_err("failed to set Probe Request appie for scan"); + ath6kl_err("failed to set Probe Request appie for scan\n"); return ret; } @@ -1512,6 +1570,9 @@ static int ath6kl_cfg80211_change_iface(struct wiphy *wiphy, } } + /* need to clean up enhanced bmiss detection fw state */ + ath6kl_cfg80211_sta_bmiss_enhance(vif, false); + set_iface_type: switch (type) { case NL80211_IFTYPE_STATION: @@ -2074,7 +2135,9 @@ static int ath6kl_wow_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow) if (wow && (wow->n_patterns > WOW_MAX_FILTERS_PER_LIST)) return -EINVAL; - if (!test_bit(NETDEV_MCAST_ALL_ON, &vif->flags)) { + if (!test_bit(NETDEV_MCAST_ALL_ON, &vif->flags) && + test_bit(ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER, + ar->fw_capabilities)) { ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi, vif->fw_vif_idx, false); if (ret) @@ -2209,7 +2272,9 @@ static int ath6kl_wow_resume(struct ath6kl *ar) ar->state = ATH6KL_STATE_ON; - if (!test_bit(NETDEV_MCAST_ALL_OFF, &vif->flags)) { + if (!test_bit(NETDEV_MCAST_ALL_OFF, &vif->flags) && + test_bit(ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER, + ar->fw_capabilities)) { ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi, vif->fw_vif_idx, true); if (ret) @@ -2475,7 +2540,7 @@ void ath6kl_check_wow_status(struct ath6kl *ar) static int ath6kl_set_htcap(struct ath6kl_vif *vif, enum ieee80211_band band, bool ht_enable) { - struct ath6kl_htcap *htcap = &vif->htcap; + struct ath6kl_htcap *htcap = &vif->htcap[band]; if (htcap->ht_enable == ht_enable) return 0; @@ -2585,6 +2650,30 @@ static int ath6kl_set_ies(struct ath6kl_vif *vif, return 0; } +void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable) +{ + int err; + + if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag))) + return; + + if (vif->nw_type != INFRA_NETWORK) + return; + + if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, + vif->ar->fw_capabilities)) + return; + + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n", + enable ? "enable" : "disable"); + + err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi, + vif->fw_vif_idx, enable); + if (err) + ath6kl_err("failed to %s enhanced bmiss detection: %d\n", + enable ? "enable" : "disable", err); +} + static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon, u8 *rsn_capab) { @@ -2665,9 +2754,15 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev, /* TODO: * info->interval - * info->dtim_period */ + ret = ath6kl_wmi_ap_set_dtim_cmd(ar->wmi, vif->fw_vif_idx, + info->dtim_period); + + /* ignore error, just print a warning and continue normally */ + if (ret) + ath6kl_warn("Failed to set dtim_period in beacon: %d\n", ret); + if (info->beacon.head == NULL) return -EINVAL; mgmt = (struct ieee80211_mgmt *) info->beacon.head; @@ -3131,10 +3226,24 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy, ath6kl_cfg80211_scan_complete_event(vif, true); ret = ath6kl_set_probed_ssids(ar, vif, request->ssids, - request->n_ssids); + request->n_ssids, + request->match_sets, + request->n_match_sets); if (ret < 0) return ret; + if (!request->n_match_sets) { + ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx, + ALL_BSS_FILTER, 0); + if (ret < 0) + return ret; + } else { + ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx, + MATCHED_SSID_FILTER, 0); + if (ret < 0) + return ret; + } + /* fw uses seconds, also make sure that it's >0 */ interval = max_t(u16, 1, request->interval / 1000); @@ -3156,7 +3265,7 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy, WMI_FRAME_PROBE_REQ, request->ie, request->ie_len); if (ret) { - ath6kl_warn("Failed to set probe request IE for scheduled scan: %d", + ath6kl_warn("Failed to set probe request IE for scheduled scan: %d\n", ret); return ret; } @@ -3188,6 +3297,18 @@ static int ath6kl_cfg80211_sscan_stop(struct wiphy *wiphy, return 0; } +static int ath6kl_cfg80211_set_bitrate(struct wiphy *wiphy, + struct net_device *dev, + const u8 *addr, + const struct cfg80211_bitrate_mask *mask) +{ + struct ath6kl *ar = ath6kl_priv(dev); + struct ath6kl_vif *vif = netdev_priv(dev); + + return ath6kl_wmi_set_bitrate_mask(ar->wmi, vif->fw_vif_idx, + mask); +} + static const struct ieee80211_txrx_stypes ath6kl_mgmt_stypes[NUM_NL80211_IFTYPES] = { [NL80211_IFTYPE_STATION] = { @@ -3253,6 +3374,7 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = { .mgmt_frame_register = ath6kl_mgmt_frame_register, .sched_scan_start = ath6kl_cfg80211_sscan_start, .sched_scan_stop = ath6kl_cfg80211_sscan_stop, + .set_bitrate_mask = ath6kl_cfg80211_set_bitrate, }; void ath6kl_cfg80211_stop(struct ath6kl_vif *vif) @@ -3380,7 +3502,8 @@ struct net_device *ath6kl_interface_add(struct ath6kl *ar, char *name, vif->listen_intvl_t = ATH6KL_DEFAULT_LISTEN_INTVAL; vif->bmiss_time_t = ATH6KL_DEFAULT_BMISS_TIME; vif->bg_scan_period = 0; - vif->htcap.ht_enable = true; + vif->htcap[IEEE80211_BAND_2GHZ].ht_enable = true; + vif->htcap[IEEE80211_BAND_5GHZ].ht_enable = true; memcpy(ndev->dev_addr, ar->mac_addr, ETH_ALEN); if (fw_vif_idx != 0) @@ -3440,7 +3563,13 @@ int ath6kl_cfg80211_init(struct ath6kl *ar) } /* max num of ssids that can be probed during scanning */ - wiphy->max_scan_ssids = MAX_PROBED_SSID_INDEX; + wiphy->max_scan_ssids = MAX_PROBED_SSIDS; + + /* max num of ssids that can be matched after scan */ + if (test_bit(ATH6KL_FW_CAPABILITY_SCHED_SCAN_MATCH_LIST, + ar->fw_capabilities)) + wiphy->max_match_sets = MAX_PROBED_SSIDS; + wiphy->max_scan_ie_len = 1000; /* FIX: what is correct limit? */ switch (ar->hw.cap) { case WMI_11AN_CAP: @@ -3477,6 +3606,17 @@ int ath6kl_cfg80211_init(struct ath6kl *ar) ath6kl_band_5ghz.ht_cap.cap = 0; ath6kl_band_5ghz.ht_cap.ht_supported = false; } + + if (ar->hw.flags & ATH6KL_HW_FLAG_64BIT_RATES) { + ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff; + ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff; + ath6kl_band_2ghz.ht_cap.mcs.rx_mask[1] = 0xff; + ath6kl_band_5ghz.ht_cap.mcs.rx_mask[1] = 0xff; + } else { + ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff; + ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff; + } + if (band_2gig) wiphy->bands[IEEE80211_BAND_2GHZ] = &ath6kl_band_2ghz; if (band_5gig) @@ -3499,7 +3639,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar) wiphy->wowlan.pattern_max_len = WOW_PATTERN_SIZE; #endif - wiphy->max_sched_scan_ssids = MAX_PROBED_SSID_INDEX; + wiphy->max_sched_scan_ssids = MAX_PROBED_SSIDS; ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM | WIPHY_FLAG_HAVE_AP_SME | |