summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath6kl/hif.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath6kl/hif.c')
-rw-r--r--drivers/net/wireless/ath/ath6kl/hif.c697
1 files changed, 697 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath6kl/hif.c b/drivers/net/wireless/ath/ath6kl/hif.c
new file mode 100644
index 00000000000..e57da35e59f
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/hif.c
@@ -0,0 +1,697 @@
+/*
+ * Copyright (c) 2007-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include "hif.h"
+
+#include "core.h"
+#include "target.h"
+#include "hif-ops.h"
+#include "debug.h"
+
+#define MAILBOX_FOR_BLOCK_SIZE 1
+
+#define ATH6KL_TIME_QUANTUM 10 /* in ms */
+
+static int ath6kl_hif_cp_scat_dma_buf(struct hif_scatter_req *req,
+ bool from_dma)
+{
+ u8 *buf;
+ int i;
+
+ buf = req->virt_dma_buf;
+
+ for (i = 0; i < req->scat_entries; i++) {
+
+ if (from_dma)
+ memcpy(req->scat_list[i].buf, buf,
+ req->scat_list[i].len);
+ else
+ memcpy(buf, req->scat_list[i].buf,
+ req->scat_list[i].len);
+
+ buf += req->scat_list[i].len;
+ }
+
+ return 0;
+}
+
+int ath6kl_hif_rw_comp_handler(void *context, int status)
+{
+ struct htc_packet *packet = context;
+
+ ath6kl_dbg(ATH6KL_DBG_HIF, "hif rw completion pkt 0x%p status %d\n",
+ packet, status);
+
+ packet->status = status;
+ packet->completion(packet->context, packet);
+
+ return 0;
+}
+#define REG_DUMP_COUNT_AR6003 60
+#define REGISTER_DUMP_LEN_MAX 60
+
+static void ath6kl_hif_dump_fw_crash(struct ath6kl *ar)
+{
+ __le32 regdump_val[REGISTER_DUMP_LEN_MAX];
+ u32 i, address, regdump_addr = 0;
+ int ret;
+
+ if (ar->target_type != TARGET_TYPE_AR6003)
+ return;
+
+ /* the reg dump pointer is copied to the host interest area */
+ address = ath6kl_get_hi_item_addr(ar, HI_ITEM(hi_failure_state));
+ address = TARG_VTOP(ar->target_type, address);
+
+ /* read RAM location through diagnostic window */
+ ret = ath6kl_diag_read32(ar, address, &regdump_addr);
+
+ if (ret || !regdump_addr) {
+ ath6kl_warn("failed to get ptr to register dump area: %d\n",
+ ret);
+ return;
+ }
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ, "register dump data address 0x%x\n",
+ regdump_addr);
+ regdump_addr = TARG_VTOP(ar->target_type, regdump_addr);
+
+ /* fetch register dump data */
+ ret = ath6kl_diag_read(ar, regdump_addr, (u8 *)&regdump_val[0],
+ REG_DUMP_COUNT_AR6003 * (sizeof(u32)));
+ if (ret) {
+ ath6kl_warn("failed to get register dump: %d\n", ret);
+ return;
+ }
+
+ ath6kl_info("crash dump:\n");
+ ath6kl_info("hw 0x%x fw %s\n", ar->wiphy->hw_version,
+ ar->wiphy->fw_version);
+
+ BUILD_BUG_ON(REG_DUMP_COUNT_AR6003 % 4);
+
+ for (i = 0; i < REG_DUMP_COUNT_AR6003 / 4; i++) {
+ ath6kl_info("%d: 0x%8.8x 0x%8.8x 0x%8.8x 0x%8.8x\n",
+ 4 * i,
+ le32_to_cpu(regdump_val[i]),
+ le32_to_cpu(regdump_val[i + 1]),
+ le32_to_cpu(regdump_val[i + 2]),
+ le32_to_cpu(regdump_val[i + 3]));
+ }
+
+}
+
+static int ath6kl_hif_proc_dbg_intr(struct ath6kl_device *dev)
+{
+ u32 dummy;
+ int ret;
+
+ ath6kl_warn("firmware crashed\n");
+
+ /*
+ * read counter to clear the interrupt, the debug error interrupt is
+ * counter 0.
+ */
+ ret = hif_read_write_sync(dev->ar, COUNT_DEC_ADDRESS,
+ (u8 *)&dummy, 4, HIF_RD_SYNC_BYTE_INC);
+ if (ret)
+ ath6kl_warn("Failed to clear debug interrupt: %d\n", ret);
+
+ ath6kl_hif_dump_fw_crash(dev->ar);
+
+ return ret;
+}
+
+/* mailbox recv message polling */
+int ath6kl_hif_poll_mboxmsg_rx(struct ath6kl_device *dev, u32 *lk_ahd,
+ int timeout)
+{
+ struct ath6kl_irq_proc_registers *rg;
+ int status = 0, i;
+ u8 htc_mbox = 1 << HTC_MAILBOX;
+
+ for (i = timeout / ATH6KL_TIME_QUANTUM; i > 0; i--) {
+ /* this is the standard HIF way, load the reg table */
+ status = hif_read_write_sync(dev->ar, HOST_INT_STATUS_ADDRESS,
+ (u8 *) &dev->irq_proc_reg,
+ sizeof(dev->irq_proc_reg),
+ HIF_RD_SYNC_BYTE_INC);
+
+ if (status) {
+ ath6kl_err("failed to read reg table\n");
+ return status;
+ }
+
+ /* check for MBOX data and valid lookahead */
+ if (dev->irq_proc_reg.host_int_status & htc_mbox) {
+ if (dev->irq_proc_reg.rx_lkahd_valid &
+ htc_mbox) {
+ /*
+ * Mailbox has a message and the look ahead
+ * is valid.
+ */
+ rg = &dev->irq_proc_reg;
+ *lk_ahd =
+ le32_to_cpu(rg->rx_lkahd[HTC_MAILBOX]);
+ break;
+ }
+ }
+
+ /* delay a little */
+ mdelay(ATH6KL_TIME_QUANTUM);
+ ath6kl_dbg(ATH6KL_DBG_HIF, "hif retry mbox poll try %d\n", i);
+ }
+
+ if (i == 0) {
+ ath6kl_err("timeout waiting for recv message\n");
+ status = -ETIME;
+ /* check if the target asserted */
+ if (dev->irq_proc_reg.counter_int_status &
+ ATH6KL_TARGET_DEBUG_INTR_MASK)
+ /*
+ * Target failure handler will be called in case of
+ * an assert.
+ */
+ ath6kl_hif_proc_dbg_intr(dev);
+ }
+
+ return status;
+}
+
+/*
+ * Disable packet reception (used in case the host runs out of buffers)
+ * using the interrupt enable registers through the host I/F
+ */
+int ath6kl_hif_rx_control(struct ath6kl_device *dev, bool enable_rx)
+{
+ struct ath6kl_irq_enable_reg regs;
+ int status = 0;
+
+ ath6kl_dbg(ATH6KL_DBG_HIF, "hif rx %s\n",
+ enable_rx ? "enable" : "disable");
+
+ /* take the lock to protect interrupt enable shadows */
+ spin_lock_bh(&dev->lock);
+
+ if (enable_rx)
+ dev->irq_en_reg.int_status_en |=
+ SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01);
+ else
+ dev->irq_en_reg.int_status_en &=
+ ~SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01);
+
+ memcpy(&regs, &dev->irq_en_reg, sizeof(regs));
+
+ spin_unlock_bh(&dev->lock);
+
+ status = hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS,
+ &regs.int_status_en,
+ sizeof(struct ath6kl_irq_enable_reg),
+ HIF_WR_SYNC_BYTE_INC);
+
+ return status;
+}
+
+int ath6kl_hif_submit_scat_req(struct ath6kl_device *dev,
+ struct hif_scatter_req *scat_req, bool read)
+{
+ int status = 0;
+
+ if (read) {
+ scat_req->req = HIF_RD_SYNC_BLOCK_FIX;
+ scat_req->addr = dev->ar->mbox_info.htc_addr;
+ } else {
+ scat_req->req = HIF_WR_ASYNC_BLOCK_INC;
+
+ scat_req->addr =
+ (scat_req->len > HIF_MBOX_WIDTH) ?
+ dev->ar->mbox_info.htc_ext_addr :
+ dev->ar->mbox_info.htc_addr;
+ }
+
+ ath6kl_dbg(ATH6KL_DBG_HIF,
+ "hif submit scatter request entries %d len %d mbox 0x%x %s %s\n",
+ scat_req->scat_entries, scat_req->len,
+ scat_req->addr, !read ? "async" : "sync",
+ (read) ? "rd" : "wr");
+
+ if (!read && scat_req->virt_scat) {
+ status = ath6kl_hif_cp_scat_dma_buf(scat_req, false);
+ if (status) {
+ scat_req->status = status;
+ scat_req->complete(dev->ar->htc_target, scat_req);
+ return 0;
+ }
+ }
+
+ status = ath6kl_hif_scat_req_rw(dev->ar, scat_req);
+
+ if (read) {
+ /* in sync mode, we can touch the scatter request */
+ scat_req->status = status;
+ if (!status && scat_req->virt_scat)
+ scat_req->status =
+ ath6kl_hif_cp_scat_dma_buf(scat_req, true);
+ }
+
+ return status;
+}
+
+static int ath6kl_hif_proc_counter_intr(struct ath6kl_device *dev)
+{
+ u8 counter_int_status;
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ, "counter interrupt\n");
+
+ counter_int_status = dev->irq_proc_reg.counter_int_status &
+ dev->irq_en_reg.cntr_int_status_en;
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ,
+ "valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n",
+ counter_int_status);
+
+ /*
+ * NOTE: other modules like GMBOX may use the counter interrupt for
+ * credit flow control on other counters, we only need to check for
+ * the debug assertion counter interrupt.
+ */
+ if (counter_int_status & ATH6KL_TARGET_DEBUG_INTR_MASK)
+ return ath6kl_hif_proc_dbg_intr(dev);
+
+ return 0;
+}
+
+static int ath6kl_hif_proc_err_intr(struct ath6kl_device *dev)
+{
+ int status;
+ u8 error_int_status;
+ u8 reg_buf[4];
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ, "error interrupt\n");
+
+ error_int_status = dev->irq_proc_reg.error_int_status & 0x0F;
+ if (!error_int_status) {
+ WARN_ON(1);
+ return -EIO;
+ }
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ,
+ "valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n",
+ error_int_status);
+
+ if (MS(ERROR_INT_STATUS_WAKEUP, error_int_status))
+ ath6kl_dbg(ATH6KL_DBG_IRQ, "error : wakeup\n");
+
+ if (MS(ERROR_INT_STATUS_RX_UNDERFLOW, error_int_status))
+ ath6kl_err("rx underflow\n");
+
+ if (MS(ERROR_INT_STATUS_TX_OVERFLOW, error_int_status))
+ ath6kl_err("tx overflow\n");
+
+ /* Clear the interrupt */
+ dev->irq_proc_reg.error_int_status &= ~error_int_status;
+
+ /* set W1C value to clear the interrupt, this hits the register first */
+ reg_buf[0] = error_int_status;
+ reg_buf[1] = 0;
+ reg_buf[2] = 0;
+ reg_buf[3] = 0;
+
+ status = hif_read_write_sync(dev->ar, ERROR_INT_STATUS_ADDRESS,
+ reg_buf, 4, HIF_WR_SYNC_BYTE_FIX);
+
+ if (status)
+ WARN_ON(1);
+
+ return status;
+}
+
+static int ath6kl_hif_proc_cpu_intr(struct ath6kl_device *dev)
+{
+ int status;
+ u8 cpu_int_status;
+ u8 reg_buf[4];
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ, "cpu interrupt\n");
+
+ cpu_int_status = dev->irq_proc_reg.cpu_int_status &
+ dev->irq_en_reg.cpu_int_status_en;
+ if (!cpu_int_status) {
+ WARN_ON(1);
+ return -EIO;
+ }
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ,
+ "valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n",
+ cpu_int_status);
+
+ /* Clear the interrupt */
+ dev->irq_proc_reg.cpu_int_status &= ~cpu_int_status;
+
+ /*
+ * Set up the register transfer buffer to hit the register 4 times ,
+ * this is done to make the access 4-byte aligned to mitigate issues
+ * with host bus interconnects that restrict bus transfer lengths to
+ * be a multiple of 4-bytes.
+ */
+
+ /* set W1C value to clear the interrupt, this hits the register first */
+ reg_buf[0] = cpu_int_status;
+ /* the remaining are set to zero which have no-effect */
+ reg_buf[1] = 0;
+ reg_buf[2] = 0;
+ reg_buf[3] = 0;
+
+ status = hif_read_write_sync(dev->ar, CPU_INT_STATUS_ADDRESS,
+ reg_buf, 4, HIF_WR_SYNC_BYTE_FIX);
+
+ if (status)
+ WARN_ON(1);
+
+ return status;
+}
+
+/* process pending interrupts synchronously */
+static int proc_pending_irqs(struct ath6kl_device *dev, bool *done)
+{
+ struct ath6kl_irq_proc_registers *rg;
+ int status = 0;
+ u8 host_int_status = 0;
+ u32 lk_ahd = 0;
+ u8 htc_mbox = 1 << HTC_MAILBOX;
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ, "proc_pending_irqs: (dev: 0x%p)\n", dev);
+
+ /*
+ * NOTE: HIF implementation guarantees that the context of this
+ * call allows us to perform SYNCHRONOUS I/O, that is we can block,
+ * sleep or call any API that can block or switch thread/task
+ * contexts. This is a fully schedulable context.
+ */
+
+ /*
+ * Process pending intr only when int_status_en is clear, it may
+ * result in unnecessary bus transaction otherwise. Target may be
+ * unresponsive at the time.
+ */
+ if (dev->irq_en_reg.int_status_en) {
+ /*
+ * Read the first 28 bytes of the HTC register table. This
+ * will yield us the value of different int status
+ * registers and the lookahead registers.
+ *
+ * length = sizeof(int_status) + sizeof(cpu_int_status)
+ * + sizeof(error_int_status) +
+ * sizeof(counter_int_status) +
+ * sizeof(mbox_frame) + sizeof(rx_lkahd_valid)
+ * + sizeof(hole) + sizeof(rx_lkahd) +
+ * sizeof(int_status_en) +
+ * sizeof(cpu_int_status_en) +
+ * sizeof(err_int_status_en) +
+ * sizeof(cntr_int_status_en);
+ */
+ status = hif_read_write_sync(dev->ar, HOST_INT_STATUS_ADDRESS,
+ (u8 *) &dev->irq_proc_reg,
+ sizeof(dev->irq_proc_reg),
+ HIF_RD_SYNC_BYTE_INC);
+ if (status)
+ goto out;
+
+ if (AR_DBG_LVL_CHECK(ATH6KL_DBG_IRQ))
+ ath6kl_dump_registers(dev, &dev->irq_proc_reg,
+ &dev->irq_en_reg);
+
+ /* Update only those registers that are enabled */
+ host_int_status = dev->irq_proc_reg.host_int_status &
+ dev->irq_en_reg.int_status_en;
+
+ /* Look at mbox status */
+ if (host_int_status & htc_mbox) {
+ /*
+ * Mask out pending mbox value, we use "lookAhead as
+ * the real flag for mbox processing.
+ */
+ host_int_status &= ~htc_mbox;
+ if (dev->irq_proc_reg.rx_lkahd_valid &
+ htc_mbox) {
+ rg = &dev->irq_proc_reg;
+ lk_ahd = le32_to_cpu(rg->rx_lkahd[HTC_MAILBOX]);
+ if (!lk_ahd)
+ ath6kl_err("lookAhead is zero!\n");
+ }
+ }
+ }
+
+ if (!host_int_status && !lk_ahd) {
+ *done = true;
+ goto out;
+ }
+
+ if (lk_ahd) {
+ int fetched = 0;
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ,
+ "pending mailbox msg, lk_ahd: 0x%X\n", lk_ahd);
+ /*
+ * Mailbox Interrupt, the HTC layer may issue async
+ * requests to empty the mailbox. When emptying the recv
+ * mailbox we use the async handler above called from the
+ * completion routine of the callers read request. This can
+ * improve performance by reducing context switching when
+ * we rapidly pull packets.
+ */
+ status = ath6kl_htc_rxmsg_pending_handler(dev->htc_cnxt,
+ lk_ahd, &fetched);
+ if (status)
+ goto out;
+
+ if (!fetched)
+ /*
+ * HTC could not pull any messages out due to lack
+ * of resources.
+ */
+ dev->htc_cnxt->chk_irq_status_cnt = 0;
+ }
+
+ /* now handle the rest of them */
+ ath6kl_dbg(ATH6KL_DBG_IRQ,
+ "valid interrupt source(s) for other interrupts: 0x%x\n",
+ host_int_status);
+
+ if (MS(HOST_INT_STATUS_CPU, host_int_status)) {
+ /* CPU Interrupt */
+ status = ath6kl_hif_proc_cpu_intr(dev);
+ if (status)
+ goto out;
+ }
+
+ if (MS(HOST_INT_STATUS_ERROR, host_int_status)) {
+ /* Error Interrupt */
+ status = ath6kl_hif_proc_err_intr(dev);
+ if (status)
+ goto out;
+ }
+
+ if (MS(HOST_INT_STATUS_COUNTER, host_int_status))
+ /* Counter Interrupt */
+ status = ath6kl_hif_proc_counter_intr(dev);
+
+out:
+ /*
+ * An optimization to bypass reading the IRQ status registers
+ * unecessarily which can re-wake the target, if upper layers
+ * determine that we are in a low-throughput mode, we can rely on
+ * taking another interrupt rather than re-checking the status
+ * registers which can re-wake the target.
+ *
+ * NOTE : for host interfaces that makes use of detecting pending
+ * mbox messages at hif can not use this optimization due to
+ * possible side effects, SPI requires the host to drain all
+ * messages from the mailbox before exiting the ISR routine.
+ */
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ,
+ "bypassing irq status re-check, forcing done\n");
+
+ if (!dev->htc_cnxt->chk_irq_status_cnt)
+ *done = true;
+
+ ath6kl_dbg(ATH6KL_DBG_IRQ,
+ "proc_pending_irqs: (done:%d, status=%d\n", *done, status);
+
+ return status;
+}
+
+/* interrupt handler, kicks off all interrupt processing */
+int ath6kl_hif_intr_bh_handler(struct ath6kl *ar)
+{
+ struct ath6kl_device *dev = ar->htc_target->dev;
+ unsigned long timeout;
+ int status = 0;
+ bool done = false;
+
+ /*
+ * Reset counter used to flag a re-scan of IRQ status registers on
+ * the target.
+ */
+ dev->htc_cnxt->chk_irq_status_cnt = 0;
+
+ /*
+ * IRQ processing is synchronous, interrupt status registers can be
+ * re-read.
+ */
+ timeout = jiffies + msecs_to_jiffies(ATH6KL_HIF_COMMUNICATION_TIMEOUT);
+ while (time_before(jiffies, timeout) && !done) {
+ status = proc_pending_irqs(dev, &done);
+ if (status)
+ break;
+ }
+
+ return status;
+}
+
+static int ath6kl_hif_enable_intrs(struct ath6kl_device *dev)
+{
+ struct ath6kl_irq_enable_reg regs;
+ int status;
+
+ spin_lock_bh(&dev->lock);
+
+ /* Enable all but ATH6KL CPU interrupts */
+ dev->irq_en_reg.int_status_en =
+ SM(INT_STATUS_ENABLE_ERROR, 0x01) |
+ SM(INT_STATUS_ENABLE_CPU, 0x01) |
+ SM(INT_STATUS_ENABLE_COUNTER, 0x01);
+
+ /*
+ * NOTE: There are some cases where HIF can do detection of
+ * pending mbox messages which is disabled now.
+ */
+ dev->irq_en_reg.int_status_en |= SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01);
+
+ /* Set up the CPU Interrupt status Register */
+ dev->irq_en_reg.cpu_int_status_en = 0;
+
+ /* Set up the Error Interrupt status Register */
+ dev->irq_en_reg.err_int_status_en =
+ SM(ERROR_STATUS_ENABLE_RX_UNDERFLOW, 0x01) |
+ SM(ERROR_STATUS_ENABLE_TX_OVERFLOW, 0x1);
+
+ /*
+ * Enable Counter interrupt status register to get fatal errors for
+ * debugging.
+ */
+ dev->irq_en_reg.cntr_int_status_en = SM(COUNTER_INT_STATUS_ENABLE_BIT,
+ ATH6KL_TARGET_DEBUG_INTR_MASK);
+ memcpy(&regs, &dev->irq_en_reg, sizeof(regs));
+
+ spin_unlock_bh(&dev->lock);
+
+ status = hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS,
+ &regs.int_status_en, sizeof(regs),
+ HIF_WR_SYNC_BYTE_INC);
+
+ if (status)
+ ath6kl_err("failed to update interrupt ctl reg err: %d\n",
+ status);
+
+ return status;
+}
+
+int ath6kl_hif_disable_intrs(struct ath6kl_device *dev)
+{
+ struct ath6kl_irq_enable_reg regs;
+
+ spin_lock_bh(&dev->lock);
+ /* Disable all interrupts */
+ dev->irq_en_reg.int_status_en = 0;
+ dev->irq_en_reg.cpu_int_status_en = 0;
+ dev->irq_en_reg.err_int_status_en = 0;
+ dev->irq_en_reg.cntr_int_status_en = 0;
+ memcpy(&regs, &dev->irq_en_reg, sizeof(regs));
+ spin_unlock_bh(&dev->lock);
+
+ return hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS,
+ &regs.int_status_en, sizeof(regs),
+ HIF_WR_SYNC_BYTE_INC);
+}
+
+/* enable device interrupts */
+int ath6kl_hif_unmask_intrs(struct ath6kl_device *dev)
+{
+ int status = 0;
+
+ /*
+ * Make sure interrupt are disabled before unmasking at the HIF
+ * layer. The rationale here is that between device insertion
+ * (where we clear the interrupts the first time) and when HTC
+ * is finally ready to handle interrupts, other software can perform
+ * target "soft" resets. The ATH6KL interrupt enables reset back to an
+ * "enabled" state when this happens.
+ */
+ ath6kl_hif_disable_intrs(dev);
+
+ /* unmask the host controller interrupts */
+ ath6kl_hif_irq_enable(dev->ar);
+ status = ath6kl_hif_enable_intrs(dev);
+
+ return status;
+}
+
+/* disable all device interrupts */
+int ath6kl_hif_mask_intrs(struct ath6kl_device *dev)
+{
+ /*
+ * Mask the interrupt at the HIF layer to avoid any stray interrupt
+ * taken while we zero out our shadow registers in
+ * ath6kl_hif_disable_intrs().
+ */
+ ath6kl_hif_irq_disable(dev->ar);
+
+ return ath6kl_hif_disable_intrs(dev);
+}
+
+int ath6kl_hif_setup(struct ath6kl_device *dev)
+{
+ int status = 0;
+
+ spin_lock_init(&dev->lock);
+
+ /*
+ * NOTE: we actually get the block size of a mailbox other than 0,
+ * for SDIO the block size on mailbox 0 is artificially set to 1.
+ * So we use the block size that is set for the other 3 mailboxes.
+ */
+ dev->htc_cnxt->block_sz = dev->ar->mbox_info.block_size;
+
+ /* must be a power of 2 */
+ if ((dev->htc_cnxt->block_sz & (dev->htc_cnxt->block_sz - 1)) != 0) {
+ WARN_ON(1);
+ status = -EINVAL;
+ goto fail_setup;
+ }
+
+ /* assemble mask, used for padding to a block */
+ dev->htc_cnxt->block_mask = dev->htc_cnxt->block_sz - 1;
+
+ ath6kl_dbg(ATH6KL_DBG_HIF, "hif block size %d mbox addr 0x%x\n",
+ dev->htc_cnxt->block_sz, dev->ar->mbox_info.htc_addr);
+
+ status = ath6kl_hif_disable_intrs(dev);
+
+fail_setup:
+ return status;
+
+}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-22 07:48:01 +0000